commit a699213d4e upstream.
Revert commit 1afa70632c ("serial: qcom-geni: Enable PM runtime for
serial driver") and its dependent commit 86fa39dd6f ("serial:
qcom-geni: Enable Serial on SA8255p Qualcomm platforms") because the
first one causes regression - hang task on Qualcomm RB1 board (QRB2210)
and unable to use serial at all during normal boot:
INFO: task kworker/u16:0:12 blocked for more than 42 seconds.
Not tainted 6.17.0-rc1-00004-g53e760d89498 #9
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u16:0 state:D stack:0 pid:12 tgid:12 ppid:2 task_flags:0x4208060 flags:0x00000010
Workqueue: async async_run_entry_fn
Call trace:
__switch_to+0xe8/0x1a0 (T)
__schedule+0x290/0x7c0
schedule+0x34/0x118
rpm_resume+0x14c/0x66c
rpm_resume+0x2a4/0x66c
rpm_resume+0x2a4/0x66c
rpm_resume+0x2a4/0x66c
__pm_runtime_resume+0x50/0x9c
__driver_probe_device+0x58/0x120
driver_probe_device+0x3c/0x154
__driver_attach_async_helper+0x4c/0xc0
async_run_entry_fn+0x34/0xe0
process_one_work+0x148/0x290
worker_thread+0x2c4/0x3e0
kthread+0x118/0x1c0
ret_from_fork+0x10/0x20
The issue was reported on 12th of August and was ignored by author of
commits introducing issue for two weeks. Only after complaining author
produced a fix which did not work, so if original commits cannot be
reliably fixed for 5 weeks, they obviously are buggy and need to be
dropped.
Fixes: 1afa70632c ("serial: qcom-geni: Enable PM runtime for serial driver")
Reported-by: Alexey Klimov <alexey.klimov@linaro.org>
Closes: https://lore.kernel.org/all/DC0D53ZTNOBU.E8LSD5E5Z8TX@linaro.org/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Alexey Klimov <alexey.klimov@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250917010437.129912-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 208d7f788e upstream.
This `srctree/` link pointed to a file with an underscore, but the header
used a dash instead.
Thus fix it.
This cleans a future warning that will check our `srctree/` links.
Cc: stable@vger.kernel.org
Fixes: 3253aba340 ("rust: block: introduce `kernel::block::mq` module")
Reviewed-by: Daniel Almeida <daniel.almeida@collabora.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1fb710793c upstream.
The MES set resources packet has an optional bit 'lr_compute_wa'
which can be used for preventing MES hangs on long compute jobs.
Set this bit by default.
Co-developed-by: Yifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8318e04ab2 upstream.
It is possible that the topology parsing function
audioreach_widget_load_module_common() could return NULL or an error
pointer. Add missing NULL check so that we do not dereference it.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Stable@vger.kernel.org
Fixes: 36ad9bf1d9 ("ASoC: qdsp6: audioreach: add topology support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@oss.qualcomm.com>
Link: https://patch.msgid.link/20250825101247.152619-2-srinivas.kandagatla@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80eaf32672 upstream.
In 'stm32_csi_start', 'csidev->s_subdev' is dereferenced directly while
assigning a value to the 'src_pad'. However the same value is being
checked against NULL at a later point of time indicating that there
are chances that the value can be NULL.
Move the dereference after the NULL check.
Fixes: e7bad98c20 ("media: v4l: Convert the users of v4l2_get_link_freq to call it on a pad")
Cc: stable@vger.kernel.org
Signed-off-by: Chandra Mohan Sundar <chandramohan.explore@gmail.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 02a24f13b3 upstream.
One internal buffer which is allocated only once per session was not
being freed during session close because it was not being tracked as
part of internal buffer list which resulted in a memory leak.
Add the necessary logic to explicitly free the untracked internal buffer
during session close to ensure all allocated memory is released
properly.
Fixes: 73702f45db ("media: iris: allocate, initialize and queue internal buffers")
Cc: stable@vger.kernel.org
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Tested-by: Vikash Garodia <quic_vgarodia@quicinc.com> # X1E80100
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8550-HDK
Tested-by: Neil Armstrong <neil.armstrong@linaro.org> # on SM8650-HDK
Signed-off-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # x1e80100-crd
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3fd2ef2ae2 upstream.
If ab->fw.m3_data points to data, then fw pointer remains null.
Further, if m3_mem is not allocated, then fw is dereferenced to be
passed to ath11k_err function.
Replace fw->size by m3_len.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 7db88b962f ("wifi: ath11k: add firmware-2.bin support")
Cc: stable@vger.kernel.org
Signed-off-by: Matvey Kovalev <matvey.kovalev@ispras.ru>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250917192020.1340-1-matvey.kovalev@ispras.ru
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1367da7eb8 upstream.
It is possible to hit a zero entry while traversing the vmas in unuse_mm()
called from swapoff path and accessing it causes the OOPS:
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000446--> Loading the memory from offset 0x40 on the
XA_ZERO_ENTRY as address.
Mem abort info:
ESR = 0x0000000096000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
The issue is manifested from the below race between the fork() on a
process and swapoff:
fork(dup_mmap()) swapoff(unuse_mm)
--------------- -----------------
1) Identical mtree is built using
__mt_dup().
2) copy_pte_range()-->
copy_nonpresent_pte():
The dst mm is added into the
mmlist to be visible to the
swapoff operation.
3) Fatal signal is sent to the parent
process(which is the current during the
fork) thus skip the duplication of the
vmas and mark the vma range with
XA_ZERO_ENTRY as a marker for this process
that helps during exit_mmap().
4) swapoff is tried on the
'mm' added to the 'mmlist' as
part of the 2.
5) unuse_mm(), that iterates
through the vma's of this 'mm'
will hit the non-NULL zero entry
and operating on this zero entry
as a vma is resulting into the
oops.
The proper fix would be around not exposing this partially-valid tree to
others when droping the mmap lock, which is being solved with [1]. A
simpler solution would be checking for MMF_UNSTABLE, as it is set if
mm_struct is not fully initialized in dup_mmap().
Thanks to Liam/Lorenzo/David for all the suggestions in fixing this
issue.
Link: https://lkml.kernel.org/r/20250924181138.1762750-1-charan.kalla@oss.qualcomm.com
Link: https://lore.kernel.org/all/20250815191031.3769540-1-Liam.Howlett@oracle.com/ [1]
Fixes: d240629148 ("fork: use __mt_dup() to duplicate maple tree in dup_mmap()")
Signed-off-by: Charan Teja Kalla <charan.kalla@oss.qualcomm.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Chris Li <chrisl@kernel.org>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e2ee70291 upstream.
Per UVC 1.1+ specification 3.7.2, units and terminals must have a non-zero
unique ID.
```
Each Unit and Terminal within the video function is assigned a unique
identification number, the Unit ID (UID) or Terminal ID (TID), contained in
the bUnitID or bTerminalID field of the descriptor. The value 0x00 is
reserved for undefined ID,
```
If we add a new entity with id 0 or a duplicated ID, it will be marked
as UVC_INVALID_ENTITY_ID.
In a previous attempt commit 3dd075fe8e ("media: uvcvideo: Require
entities to have a non-zero unique ID"), we ignored all the invalid units,
this broke a lot of non-compatible cameras. Hopefully we are more lucky
this time.
This also prevents some syzkaller reproducers from triggering warnings due
to a chain of entities referring to themselves. In one particular case, an
Output Unit is connected to an Input Unit, both with the same ID of 1. But
when looking up for the source ID of the Output Unit, that same entity is
found instead of the input entity, which leads to such warnings.
In another case, a backward chain was considered finished as the source ID
was 0. Later on, that entity was found, but its pads were not valid.
Here is a sample stack trace for one of those cases.
[ 20.650953] usb 1-1: new high-speed USB device number 2 using dummy_hcd
[ 20.830206] usb 1-1: Using ep0 maxpacket: 8
[ 20.833501] usb 1-1: config 0 descriptor??
[ 21.038518] usb 1-1: string descriptor 0 read error: -71
[ 21.038893] usb 1-1: Found UVC 0.00 device <unnamed> (2833:0201)
[ 21.039299] uvcvideo 1-1:0.0: Entity type for entity Output 1 was not initialized!
[ 21.041583] uvcvideo 1-1:0.0: Entity type for entity Input 1 was not initialized!
[ 21.042218] ------------[ cut here ]------------
[ 21.042536] WARNING: CPU: 0 PID: 9 at drivers/media/mc/mc-entity.c:1147 media_create_pad_link+0x2c4/0x2e0
[ 21.043195] Modules linked in:
[ 21.043535] CPU: 0 UID: 0 PID: 9 Comm: kworker/0:1 Not tainted 6.11.0-rc7-00030-g3480e43aeccf #444
[ 21.044101] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
[ 21.044639] Workqueue: usb_hub_wq hub_event
[ 21.045100] RIP: 0010:media_create_pad_link+0x2c4/0x2e0
[ 21.045508] Code: fe e8 20 01 00 00 b8 f4 ff ff ff 48 83 c4 30 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 0f 0b eb e9 0f 0b eb 0a 0f 0b eb 06 <0f> 0b eb 02 0f 0b b8 ea ff ff ff eb d4 66 2e 0f 1f 84 00 00 00 00
[ 21.046801] RSP: 0018:ffffc9000004b318 EFLAGS: 00010246
[ 21.047227] RAX: ffff888004e5d458 RBX: 0000000000000000 RCX: ffffffff818fccf1
[ 21.047719] RDX: 000000000000007b RSI: 0000000000000000 RDI: ffff888004313290
[ 21.048241] RBP: ffff888004313290 R08: 0001ffffffffffff R09: 0000000000000000
[ 21.048701] R10: 0000000000000013 R11: 0001888004313290 R12: 0000000000000003
[ 21.049138] R13: ffff888004313080 R14: ffff888004313080 R15: 0000000000000000
[ 21.049648] FS: 0000000000000000(0000) GS:ffff88803ec00000(0000) knlGS:0000000000000000
[ 21.050271] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 21.050688] CR2: 0000592cc27635b0 CR3: 000000000431c000 CR4: 0000000000750ef0
[ 21.051136] PKRU: 55555554
[ 21.051331] Call Trace:
[ 21.051480] <TASK>
[ 21.051611] ? __warn+0xc4/0x210
[ 21.051861] ? media_create_pad_link+0x2c4/0x2e0
[ 21.052252] ? report_bug+0x11b/0x1a0
[ 21.052540] ? trace_hardirqs_on+0x31/0x40
[ 21.052901] ? handle_bug+0x3d/0x70
[ 21.053197] ? exc_invalid_op+0x1a/0x50
[ 21.053511] ? asm_exc_invalid_op+0x1a/0x20
[ 21.053924] ? media_create_pad_link+0x91/0x2e0
[ 21.054364] ? media_create_pad_link+0x2c4/0x2e0
[ 21.054834] ? media_create_pad_link+0x91/0x2e0
[ 21.055131] ? _raw_spin_unlock+0x1e/0x40
[ 21.055441] ? __v4l2_device_register_subdev+0x202/0x210
[ 21.055837] uvc_mc_register_entities+0x358/0x400
[ 21.056144] uvc_register_chains+0x1fd/0x290
[ 21.056413] uvc_probe+0x380e/0x3dc0
[ 21.056676] ? __lock_acquire+0x5aa/0x26e0
[ 21.056946] ? find_held_lock+0x33/0xa0
[ 21.057196] ? kernfs_activate+0x70/0x80
[ 21.057533] ? usb_match_dynamic_id+0x1b/0x70
[ 21.057811] ? find_held_lock+0x33/0xa0
[ 21.058047] ? usb_match_dynamic_id+0x55/0x70
[ 21.058330] ? lock_release+0x124/0x260
[ 21.058657] ? usb_match_one_id_intf+0xa2/0x100
[ 21.058997] usb_probe_interface+0x1ba/0x330
[ 21.059399] really_probe+0x1ba/0x4c0
[ 21.059662] __driver_probe_device+0xb2/0x180
[ 21.059944] driver_probe_device+0x5a/0x100
[ 21.060170] __device_attach_driver+0xe9/0x160
[ 21.060427] ? __pfx___device_attach_driver+0x10/0x10
[ 21.060872] bus_for_each_drv+0xa9/0x100
[ 21.061312] __device_attach+0xed/0x190
[ 21.061812] device_initial_probe+0xe/0x20
[ 21.062229] bus_probe_device+0x4d/0xd0
[ 21.062590] device_add+0x308/0x590
[ 21.062912] usb_set_configuration+0x7b6/0xaf0
[ 21.063403] usb_generic_driver_probe+0x36/0x80
[ 21.063714] usb_probe_device+0x7b/0x130
[ 21.063936] really_probe+0x1ba/0x4c0
[ 21.064111] __driver_probe_device+0xb2/0x180
[ 21.064577] driver_probe_device+0x5a/0x100
[ 21.065019] __device_attach_driver+0xe9/0x160
[ 21.065403] ? __pfx___device_attach_driver+0x10/0x10
[ 21.065820] bus_for_each_drv+0xa9/0x100
[ 21.066094] __device_attach+0xed/0x190
[ 21.066535] device_initial_probe+0xe/0x20
[ 21.066992] bus_probe_device+0x4d/0xd0
[ 21.067250] device_add+0x308/0x590
[ 21.067501] usb_new_device+0x347/0x610
[ 21.067817] hub_event+0x156b/0x1e30
[ 21.068060] ? process_scheduled_works+0x48b/0xaf0
[ 21.068337] process_scheduled_works+0x5a3/0xaf0
[ 21.068668] worker_thread+0x3cf/0x560
[ 21.068932] ? kthread+0x109/0x1b0
[ 21.069133] kthread+0x197/0x1b0
[ 21.069343] ? __pfx_worker_thread+0x10/0x10
[ 21.069598] ? __pfx_kthread+0x10/0x10
[ 21.069908] ret_from_fork+0x32/0x40
[ 21.070169] ? __pfx_kthread+0x10/0x10
[ 21.070424] ret_from_fork_asm+0x1a/0x30
[ 21.070737] </TASK>
Reported-by: syzbot+0584f746fde3d52b4675@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0584f746fde3d52b4675
Reported-by: syzbot+dd320d114deb3f5bb79b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=dd320d114deb3f5bb79b
Reported-by: Youngjun Lee <yjjuny.lee@samsung.com>
Fixes: a3fbc2e6bb ("media: mc-entity.c: use WARN_ON, validate link pads")
Cc: stable@vger.kernel.org
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Co-developed-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fa0f61cc1d upstream.
Syzbot reports a KASAN issue as below:
BUG: KASAN: use-after-free in __create_pipe include/linux/usb.h:1945 [inline]
BUG: KASAN: use-after-free in send_packet+0xa2d/0xbc0 drivers/media/rc/imon.c:627
Read of size 4 at addr ffff8880256fb000 by task syz-executor314/4465
CPU: 2 PID: 4465 Comm: syz-executor314 Not tainted 6.0.0-rc1-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:317 [inline]
print_report.cold+0x2ba/0x6e9 mm/kasan/report.c:433
kasan_report+0xb1/0x1e0 mm/kasan/report.c:495
__create_pipe include/linux/usb.h:1945 [inline]
send_packet+0xa2d/0xbc0 drivers/media/rc/imon.c:627
vfd_write+0x2d9/0x550 drivers/media/rc/imon.c:991
vfs_write+0x2d7/0xdd0 fs/read_write.c:576
ksys_write+0x127/0x250 fs/read_write.c:631
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The iMON driver improperly releases the usb_device reference in
imon_disconnect without coordinating with active users of the
device.
Specifically, the fields usbdev_intf0 and usbdev_intf1 are not
protected by the users counter (ictx->users). During probe,
imon_init_intf0 or imon_init_intf1 increments the usb_device
reference count depending on the interface. However, during
disconnect, usb_put_dev is called unconditionally, regardless of
actual usage.
As a result, if vfd_write or other operations are still in
progress after disconnect, this can lead to a use-after-free of
the usb_device pointer.
Thread 1 vfd_write Thread 2 imon_disconnect
...
if
usb_put_dev(ictx->usbdev_intf0)
else
usb_put_dev(ictx->usbdev_intf1)
...
while
send_packet
if
pipe = usb_sndintpipe(
ictx->usbdev_intf0) UAF
else
pipe = usb_sndctrlpipe(
ictx->usbdev_intf0, 0) UAF
Guard access to usbdev_intf0 and usbdev_intf1 after disconnect by
checking ictx->disconnected in all writer paths. Add early return
with -ENODEV in send_packet(), vfd_write(), lcd_write() and
display_open() if the device is no longer present.
Set and read ictx->disconnected under ictx->lock to ensure memory
synchronization. Acquire the lock in imon_disconnect() before setting
the flag to synchronize with any ongoing operations.
Ensure writers exit early and safely after disconnect before the USB
core proceeds with cleanup.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Reported-by: syzbot+f1a69784f6efe748c3bf@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f1a69784f6efe748c3bf
Fixes: 21677cfc56 ("V4L/DVB: ir-core: add imon driver")
Cc: stable@vger.kernel.org
Signed-off-by: Larshin Sergey <Sergey.Larshin@kaspersky.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 40b7a19f32 upstream.
The original code uses cancel_delayed_work() in xc5000_release(), which
does not guarantee that the delayed work item timer_sleep has fully
completed if it was already running. This leads to use-after-free scenarios
where xc5000_release() may free the xc5000_priv while timer_sleep is still
active and attempts to dereference the xc5000_priv.
A typical race condition is illustrated below:
CPU 0 (release thread) | CPU 1 (delayed work callback)
xc5000_release() | xc5000_do_timer_sleep()
cancel_delayed_work() |
hybrid_tuner_release_state(priv) |
kfree(priv) |
| priv = container_of() // UAF
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the timer_sleep is properly canceled before the xc5000_priv memory
is deallocated.
A deadlock concern was considered: xc5000_release() is called in a process
context and is not holding any locks that the timer_sleep work item might
also need. Therefore, the use of the _sync() variant is safe here.
This bug was initially identified through static analysis.
Fixes: f7a27ff1fb ("[media] xc5000: delay tuner sleep to 5 seconds")
Cc: stable@vger.kernel.org
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
[hverkuil: fix typo in Subject: tunner -> tuner]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 79d10f4f21 upstream.
The state->timer is a cyclic timer that schedules work_i2c_poll and
delayed_work_enable_hotplug, while rearming itself. Using timer_delete()
fails to guarantee the timer isn't still running when destroyed, similarly
cancel_delayed_work() cannot ensure delayed_work_enable_hotplug has
terminated if already executing. During probe failure after timer
initialization, these may continue running as orphans and reference the
already-freed tc358743_state object through tc358743_irq_poll_timer.
The following is the trace captured by KASAN.
BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0
Write of size 8 at addr ffff88800ded83c8 by task swapper/1/0
...
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_report+0xcf/0x610
? __pfx_sched_balance_find_src_group+0x10/0x10
? __run_timer_base.part.0+0x7d7/0x8c0
kasan_report+0xb8/0xf0
? __run_timer_base.part.0+0x7d7/0x8c0
__run_timer_base.part.0+0x7d7/0x8c0
? rcu_sched_clock_irq+0xb06/0x27d0
? __pfx___run_timer_base.part.0+0x10/0x10
? try_to_wake_up+0xb15/0x1960
? tmigr_update_events+0x280/0x740
? _raw_spin_lock_irq+0x80/0xe0
? __pfx__raw_spin_lock_irq+0x10/0x10
tmigr_handle_remote_up+0x603/0x7e0
? __pfx_tmigr_handle_remote_up+0x10/0x10
? sched_balance_trigger+0x98/0x9f0
? sched_tick+0x221/0x5a0
? _raw_spin_lock_irq+0x80/0xe0
? __pfx__raw_spin_lock_irq+0x10/0x10
? tick_nohz_handler+0x339/0x440
? __pfx_tmigr_handle_remote_up+0x10/0x10
__walk_groups.isra.0+0x42/0x150
tmigr_handle_remote+0x1f4/0x2e0
? __pfx_tmigr_handle_remote+0x10/0x10
? ktime_get+0x60/0x140
? lapic_next_event+0x11/0x20
? clockevents_program_event+0x1d4/0x2a0
? hrtimer_interrupt+0x322/0x780
handle_softirqs+0x16a/0x550
irq_exit_rcu+0xaf/0xe0
sysvec_apic_timer_interrupt+0x70/0x80
</IRQ>
...
Allocated by task 141:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x7f/0x90
__kmalloc_node_track_caller_noprof+0x198/0x430
devm_kmalloc+0x7b/0x1e0
tc358743_probe+0xb7/0x610 i2c_device_probe+0x51d/0x880
really_probe+0x1ca/0x5c0
__driver_probe_device+0x248/0x310
driver_probe_device+0x44/0x120
__device_attach_driver+0x174/0x220
bus_for_each_drv+0x100/0x190
__device_attach+0x206/0x370
bus_probe_device+0x123/0x170
device_add+0xd25/0x1470
i2c_new_client_device+0x7a0/0xcd0
do_one_initcall+0x89/0x300
do_init_module+0x29d/0x7f0
load_module+0x4f48/0x69e0
init_module_from_file+0xe4/0x150
idempotent_init_module+0x320/0x670
__x64_sys_finit_module+0xbd/0x120
do_syscall_64+0xac/0x280
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 141:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3a/0x60
__kasan_slab_free+0x3f/0x50
kfree+0x137/0x370
release_nodes+0xa4/0x100
devres_release_group+0x1b2/0x380
i2c_device_probe+0x694/0x880
really_probe+0x1ca/0x5c0
__driver_probe_device+0x248/0x310
driver_probe_device+0x44/0x120
__device_attach_driver+0x174/0x220
bus_for_each_drv+0x100/0x190
__device_attach+0x206/0x370
bus_probe_device+0x123/0x170
device_add+0xd25/0x1470
i2c_new_client_device+0x7a0/0xcd0
do_one_initcall+0x89/0x300
do_init_module+0x29d/0x7f0
load_module+0x4f48/0x69e0
init_module_from_file+0xe4/0x150
idempotent_init_module+0x320/0x670
__x64_sys_finit_module+0xbd/0x120
do_syscall_64+0xac/0x280
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
Replace timer_delete() with timer_delete_sync() and cancel_delayed_work()
with cancel_delayed_work_sync() to ensure proper termination of timer and
work items before resource cleanup.
This bug was initially identified through static analysis. For reproduction
and testing, I created a functional emulation of the tc358743 device via a
kernel module and introduced faults through the debugfs interface.
Fixes: 869f38ae07 ("media: i2c: tc358743: Fix crash in the probe error path when using polling")
Fixes: d32d98642d ("[media] Driver for Toshiba TC358743 HDMI to CSI-2 bridge")
Cc: stable@vger.kernel.org
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 01e03fb7db upstream.
The original code uses cancel_delayed_work() in flexcop_pci_remove(), which
does not guarantee that the delayed work item irq_check_work has fully
completed if it was already running. This leads to use-after-free scenarios
where flexcop_pci_remove() may free the flexcop_device while irq_check_work
is still active and attempts to dereference the device.
A typical race condition is illustrated below:
CPU 0 (remove) | CPU 1 (delayed work callback)
flexcop_pci_remove() | flexcop_pci_irq_check_work()
cancel_delayed_work() |
flexcop_device_kfree(fc_pci->fc_dev) |
| fc = fc_pci->fc_dev; // UAF
This is confirmed by a KASAN report:
==================================================================
BUG: KASAN: slab-use-after-free in __run_timer_base.part.0+0x7d7/0x8c0
Write of size 8 at addr ffff8880093aa8c8 by task bash/135
...
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_report+0xcf/0x610
? __run_timer_base.part.0+0x7d7/0x8c0
kasan_report+0xb8/0xf0
? __run_timer_base.part.0+0x7d7/0x8c0
__run_timer_base.part.0+0x7d7/0x8c0
? __pfx___run_timer_base.part.0+0x10/0x10
? __pfx_read_tsc+0x10/0x10
? ktime_get+0x60/0x140
? lapic_next_event+0x11/0x20
? clockevents_program_event+0x1d4/0x2a0
run_timer_softirq+0xd1/0x190
handle_softirqs+0x16a/0x550
irq_exit_rcu+0xaf/0xe0
sysvec_apic_timer_interrupt+0x70/0x80
</IRQ>
...
Allocated by task 1:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x7f/0x90
__kmalloc_noprof+0x1be/0x460
flexcop_device_kmalloc+0x54/0xe0
flexcop_pci_probe+0x1f/0x9d0
local_pci_probe+0xdc/0x190
pci_device_probe+0x2fe/0x470
really_probe+0x1ca/0x5c0
__driver_probe_device+0x248/0x310
driver_probe_device+0x44/0x120
__driver_attach+0xd2/0x310
bus_for_each_dev+0xed/0x170
bus_add_driver+0x208/0x500
driver_register+0x132/0x460
do_one_initcall+0x89/0x300
kernel_init_freeable+0x40d/0x720
kernel_init+0x1a/0x150
ret_from_fork+0x10c/0x1a0
ret_from_fork_asm+0x1a/0x30
Freed by task 135:
kasan_save_stack+0x24/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3a/0x60
__kasan_slab_free+0x3f/0x50
kfree+0x137/0x370
flexcop_device_kfree+0x32/0x50
pci_device_remove+0xa6/0x1d0
device_release_driver_internal+0xf8/0x210
pci_stop_bus_device+0x105/0x150
pci_stop_and_remove_bus_device_locked+0x15/0x30
remove_store+0xcc/0xe0
kernfs_fop_write_iter+0x2c3/0x440
vfs_write+0x871/0xd70
ksys_write+0xee/0x1c0
do_syscall_64+0xac/0x280
entry_SYSCALL_64_after_hwframe+0x77/0x7f
...
Replace cancel_delayed_work() with cancel_delayed_work_sync() to ensure
that the delayed work item is properly canceled and any executing delayed
work has finished before the device memory is deallocated.
This bug was initially identified through static analysis. To reproduce
and test it, I simulated the B2C2 FlexCop PCI device in QEMU and introduced
artificial delays within the flexcop_pci_irq_check_work() function to
increase the likelihood of triggering the bug.
Fixes: 382c5546d6 ("V4L/DVB (10694): [PATCH] software IRQ watchdog for Flexcop B2C2 DVB PCI cards")
Cc: stable@vger.kernel.org
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3e31a6bc07 upstream.
There is a bug observed when rtw89_core_tx_kick_off_and_wait() tries to
access already freed skb_data:
BUG: KFENCE: use-after-free write in rtw89_core_tx_kick_off_and_wait drivers/net/wireless/realtek/rtw89/core.c:1110
CPU: 6 UID: 0 PID: 41377 Comm: kworker/u64:24 Not tainted 6.17.0-rc1+ #1 PREEMPT(lazy)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS edk2-20250523-14.fc42 05/23/2025
Workqueue: events_unbound cfg80211_wiphy_work [cfg80211]
Use-after-free write at 0x0000000020309d9d (in kfence-#251):
rtw89_core_tx_kick_off_and_wait drivers/net/wireless/realtek/rtw89/core.c:1110
rtw89_core_scan_complete drivers/net/wireless/realtek/rtw89/core.c:5338
rtw89_hw_scan_complete_cb drivers/net/wireless/realtek/rtw89/fw.c:7979
rtw89_chanctx_proceed_cb drivers/net/wireless/realtek/rtw89/chan.c:3165
rtw89_chanctx_proceed drivers/net/wireless/realtek/rtw89/chan.h:141
rtw89_hw_scan_complete drivers/net/wireless/realtek/rtw89/fw.c:8012
rtw89_mac_c2h_scanofld_rsp drivers/net/wireless/realtek/rtw89/mac.c:5059
rtw89_fw_c2h_work drivers/net/wireless/realtek/rtw89/fw.c:6758
process_one_work kernel/workqueue.c:3241
worker_thread kernel/workqueue.c:3400
kthread kernel/kthread.c:463
ret_from_fork arch/x86/kernel/process.c:154
ret_from_fork_asm arch/x86/entry/entry_64.S:258
kfence-#251: 0x0000000056e2393d-0x000000009943cb62, size=232, cache=skbuff_head_cache
allocated by task 41377 on cpu 6 at 77869.159548s (0.009551s ago):
__alloc_skb net/core/skbuff.c:659
__netdev_alloc_skb net/core/skbuff.c:734
ieee80211_nullfunc_get net/mac80211/tx.c:5844
rtw89_core_send_nullfunc drivers/net/wireless/realtek/rtw89/core.c:3431
rtw89_core_scan_complete drivers/net/wireless/realtek/rtw89/core.c:5338
rtw89_hw_scan_complete_cb drivers/net/wireless/realtek/rtw89/fw.c:7979
rtw89_chanctx_proceed_cb drivers/net/wireless/realtek/rtw89/chan.c:3165
rtw89_chanctx_proceed drivers/net/wireless/realtek/rtw89/chan.c:3194
rtw89_hw_scan_complete drivers/net/wireless/realtek/rtw89/fw.c:8012
rtw89_mac_c2h_scanofld_rsp drivers/net/wireless/realtek/rtw89/mac.c:5059
rtw89_fw_c2h_work drivers/net/wireless/realtek/rtw89/fw.c:6758
process_one_work kernel/workqueue.c:3241
worker_thread kernel/workqueue.c:3400
kthread kernel/kthread.c:463
ret_from_fork arch/x86/kernel/process.c:154
ret_from_fork_asm arch/x86/entry/entry_64.S:258
freed by task 1045 on cpu 9 at 77869.168393s (0.001557s ago):
ieee80211_tx_status_skb net/mac80211/status.c:1117
rtw89_pci_release_txwd_skb drivers/net/wireless/realtek/rtw89/pci.c:564
rtw89_pci_release_tx_skbs.isra.0 drivers/net/wireless/realtek/rtw89/pci.c:651
rtw89_pci_release_tx drivers/net/wireless/realtek/rtw89/pci.c:676
rtw89_pci_napi_poll drivers/net/wireless/realtek/rtw89/pci.c:4238
__napi_poll net/core/dev.c:7495
net_rx_action net/core/dev.c:7557 net/core/dev.c:7684
handle_softirqs kernel/softirq.c:580
do_softirq.part.0 kernel/softirq.c:480
__local_bh_enable_ip kernel/softirq.c:407
rtw89_pci_interrupt_threadfn drivers/net/wireless/realtek/rtw89/pci.c:927
irq_thread_fn kernel/irq/manage.c:1133
irq_thread kernel/irq/manage.c:1257
kthread kernel/kthread.c:463
ret_from_fork arch/x86/kernel/process.c:154
ret_from_fork_asm arch/x86/entry/entry_64.S:258
It is a consequence of a race between the waiting and the signaling side
of the completion:
Waiting thread Completing thread
rtw89_core_tx_kick_off_and_wait()
rcu_assign_pointer(skb_data->wait, wait)
/* start waiting */
wait_for_completion_timeout()
rtw89_pci_tx_status()
rtw89_core_tx_wait_complete()
rcu_read_lock()
/* signals completion and
* proceeds further
*/
complete(&wait->completion)
rcu_read_unlock()
...
/* frees skb_data */
ieee80211_tx_status_ni()
/* returns (exit status doesn't matter) */
wait_for_completion_timeout()
...
/* accesses the already freed skb_data */
rcu_assign_pointer(skb_data->wait, NULL)
The completing side might proceed and free the underlying skb even before
the waiting side is fully awoken and run to execution. Actually the race
happens regardless of wait_for_completion_timeout() exit status, e.g.
the waiting side may hit a timeout and the concurrent completing side is
still able to free the skb.
Skbs which are sent by rtw89_core_tx_kick_off_and_wait() are owned by the
driver. They don't come from core ieee80211 stack so no need to pass them
to ieee80211_tx_status_ni() on completing side.
Introduce a work function which will act as a garbage collector for
rtw89_tx_wait_info objects and the associated skbs. Thus no potentially
heavy locks are required on the completing side.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 1ae5ca6152 ("wifi: rtw89: add function to wait for completion of TX skbs")
Cc: stable@vger.kernel.org
Suggested-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250919210852.823912-2-pchelkin@ispras.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9f2c0ac142 upstream.
The previous commit 0718a78f6a ("ALSA: usb-audio: Kill timer properly at
removal") patched a UAF issue caused by the error timer.
However, because the error timer kill added in this patch occurs after the
endpoint delete, a race condition to UAF still occurs, albeit rarely.
Additionally, since kill-cleanup for urb is also missing, freed memory can
be accessed in interrupt context related to urb, which can cause UAF.
Therefore, to prevent this, error timer and urb must be killed before
freeing the heap memory.
Cc: <stable@vger.kernel.org>
Reported-by: syzbot+f02665daa2abeef4a947@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=f02665daa2abeef4a947
Fixes: 0718a78f6a ("ALSA: usb-audio: Kill timer properly at removal")
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 27e06650a5 upstream.
A buffer overflow arises from the usage of snprintf to write into the
buffer "buf" in target_lu_gp_members_show function located in
/drivers/target/target_core_configfs.c. This buffer is allocated with
size LU_GROUP_NAME_BUF (256 bytes).
snprintf(...) formats multiple strings into buf with the HBA name
(hba->hba_group.cg_item), a slash character, a devicename (dev->
dev_group.cg_item) and a newline character, the total formatted string
length may exceed the buffer size of 256 bytes.
Since snprintf() returns the total number of bytes that would have been
written (the length of %s/%sn ), this value may exceed the buffer length
(256 bytes) passed to memcpy(), this will ultimately cause function
memcpy reporting a buffer overflow error.
An additional check of the return value of snprintf() can avoid this
buffer overflow.
Reported-by: Wang Haoran <haoranwangsec@gmail.com>
Reported-by: ziiiro <yuanmingbuaa@gmail.com>
Signed-off-by: Wang Haoran <haoranwangsec@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ba28afbd9e upstream.
In the case user trigger tags grow by queue sysfs attribute nr_requests,
hctx->sched_tags will be freed directly and replaced with a new
allocated tags, see blk_mq_tag_update_depth().
The problem is that hctx->sched_tags is from elevator->et->tags, while
et->tags is still the freed tags, hence later elevator exit will try to
free the tags again, causing kernel panic.
Fix this problem by replacing et->tags with new allocated tags as well.
Noted there are still some long term problems that will require some
refactor to be fixed thoroughly[1].
[1] https://lore.kernel.org/all/20250815080216.410665-1-yukuai1@huaweicloud.com/
Fixes: f5a6604f7a ("block: fix lockdep warning caused by lock dependency in elv_iosched_store")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Li Nan <linan122@huawei.com>
Link: https://lore.kernel.org/r/20250821060612.1729939-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Just one fix to the module freeing function that was declared __weak
when it should not have been. Thanks to Petr Pavlu for spotting this.
-----BEGIN PGP SIGNATURE-----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=fjZ9
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux
Pull ARM fix from Russell King:
"Just one fix to the module freeing function that was declared __weak
when it should not have been. Thanks to Petr Pavlu for spotting this"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9458/1: module: Ensure the override of module_arch_freeing_init()
- Fix buffer overflow in osnoise_cpu_write()
The allocated buffer to read user space did not add a nul terminating byte
after copying from user the string. It then reads the string, and if user
space did not add a nul byte, the read will continue beyond the string.
Add a nul terminating byte after reading the string.
- Fix missing check for lockdown on tracing
There's a path from kprobe events or uprobe events that can update the
tracing system even if lockdown on tracing is activate. Add a check in the
dynamic event path.
- Add a recursion check for the function graph return path
Now that fprobes can hook to the function graph tracer and call different
code between the entry and the exit, the exit code may now call functions
that are not called in entry. This means that the exit handler can possibly
trigger recursion that is not caught and cause the system to crash.
Add the same recursion checks in the function exit handler as exists in the
entry handler path.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaNkbyxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qh6dAQDTFqLRb01RzaZuF/xG9A7UqNz9abq5
fQVwu1RG9xXnnAD/X9PfKfnqLhK/M2EJZT17PJ+nUlFqFoVL6lLJyrDLSw4=
=4j5J
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix buffer overflow in osnoise_cpu_write()
The allocated buffer to read user space did not add a nul terminating
byte after copying from user the string. It then reads the string,
and if user space did not add a nul byte, the read will continue
beyond the string.
Add a nul terminating byte after reading the string.
- Fix missing check for lockdown on tracing
There's a path from kprobe events or uprobe events that can update
the tracing system even if lockdown on tracing is activate. Add a
check in the dynamic event path.
- Add a recursion check for the function graph return path
Now that fprobes can hook to the function graph tracer and call
different code between the entry and the exit, the exit code may now
call functions that are not called in entry. This means that the exit
handler can possibly trigger recursion that is not caught and cause
the system to crash.
Add the same recursion checks in the function exit handler as exists
in the entry handler path.
* tag 'trace-v6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: fgraph: Protect return handler from recursion loop
tracing: dynevent: Add a missing lockdown check on dynevent
tracing/osnoise: Fix slab-out-of-bounds in _parse_integer_limit()
A few final driver specific fixes that have been sitting in -next for a
bit, the OMAP issue is likely to come up very infrequently since mixed
configuration SPI buses are rare and the Cadence issue is specific to
SoCFPGA systems.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmjZIHkACgkQJNaLcl1U
h9CAXQf/dTgcvdcuVlGX+Rs5NPo9/9M/n1B6sIH3TJCULU1fwht2XYu4ghUfVVmp
lSkHL+NYbXSUJ9lv+ZPJUjU9mlPOAjtFHX5X8I0jaiXeC8/23LQl79TuTvCfqpOF
MyoxJFEcA/nZiwn/IYybl8VMonoem5aJdXncDg70gCvQwWzxeNGAYW0NXdVk8gJz
YqC9ANI4wCyBcwokFJ9eBoz79XGPM2zDNPnYQnpW8lbJ3z0ec8l9IeAloS90bSb9
CY5RgXmFdALFMcrAYsIQl4WlZocb+NQ3S6KN2hHVUJW6A+YlW0H4YREMSmp1/Okg
boN54WdWHYmMFFF8Mrpi6w2ac1VCLQ==
=BUvX
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A few final driver specific fixes that have been sitting in -next for
a bit.
The OMAP issue is likely to come up very infrequently since mixed
configuration SPI buses are rare and the Cadence issue is specific to
SoCFPGA systems"
* tag 'spi-fix-v6.17-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: omap2-mcspi: drive SPI_CLK on transfer_setup()
spi: cadence-qspi: defer runtime support on socfpga if reset bit is enabled
aren't considered necessary for -stable kernels. 6 of these fixes are for
MM.
All singletons, please see the changelogs for details.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQTTMBEPP41GrTpTJgfdBJ7gKXxAjgUCaNjJPAAKCRDdBJ7gKXxA
jhQiAP0TkBGRBu/IbHLDh39SHANINiM6y+FvOAPTR+Jyp9maSwD/RZlLZ0TnEeoL
htD9hxxVCRYxW5LrrQLxagrTnnOC6gA=
=B6P4
-----END PGP SIGNATURE-----
Merge tag 'mm-hotfixes-stable-2025-09-27-22-35' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"7 hotfixes. 4 are cc:stable and the remainder address post-6.16 issues
or aren't considered necessary for -stable kernels. 6 of these fixes
are for MM.
All singletons, please see the changelogs for details"
* tag 'mm-hotfixes-stable-2025-09-27-22-35' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
include/linux/pgtable.h: convert arch_enter_lazy_mmu_mode() and friends to static inlines
mm/damon/sysfs: do not ignore callback's return value in damon_sysfs_damon_call()
mailmap: add entry for Bence Csókás
fs/proc/task_mmu: check p->vec_buf for NULL
kmsan: fix out-of-bounds access to shadow memory
mm/hugetlb: fix copy_hugetlb_page_range() to use ->pt_share_count
mm/hugetlb: fix folio is still mapped when deleted
While applying the patch for commit ede965fd55 ("i2c: rtl9300: remove
broken SMBus Quick operation support"), a conflict was incorrectly solved
by adding the I2C_FUNC_SMBUS_I2C_BLOCK feature flag. But the code to handle
I2C_SMBUS_I2C_BLOCK_DATA requests will be added by a separate commit.
Fixes: ede965fd55 ("i2c: rtl9300: remove broken SMBus Quick operation support")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Add a MAINTAINERS entry for the SpacemiT K1 I2C driver and its DT binding.
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
I volunteered as maintainer of the DesignWare I2C driver, so update my
entry from reviewer to maintainer.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Acked-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
The email address bounced. I couldn't find a newer one in recent git history,
so delete this email entry.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
- Fix a buffer overflow in actions_parse()
The "trigger_c" variable did not account for the nul byte when
determining its size.
- Fix a compare that had the values reversed
actions_destroy() is to reallocate when len is greater than the current size,
but the compare was testing if size is greater than the new length.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaNfbFhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qmozAPwKEWRb1gbDIeeva7r6HVRc1jKO3EfK
qT72fgqfKlwUawD/fM3mlW1+n25ZHMX+1e8eQV1CP5VOldgdQEHFzDEz0gI=
=i8D5
-----END PGP SIGNATURE-----
Merge tag 'trace-tools-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull rtla tool fixes from Steven Rostedt:
- Fix a buffer overflow in actions_parse()
The "trigger_c" variable did not account for the nul byte when
determining its size
- Fix a compare that had the values reversed
actions_destroy() is supposed to reallocate when len is greater than
the current size, but the compare was testing if size is greater than
the new length
* tag 'trace-tools-v6.17-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rtla/actions: Fix condition for buffer reallocation
rtla: Fix buffer overflow in actions_parse
function_graph_enter_regs() prevents itself from recursion by
ftrace_test_recursion_trylock(), but __ftrace_return_to_handler(),
which is called at the exit, does not prevent such recursion.
Therefore, while it can prevent recursive calls from
fgraph_ops::entryfunc(), it is not able to prevent recursive calls
to fgraph from fgraph_ops::retfunc(), resulting in a recursive loop.
This can lead an unexpected recursion bug reported by Menglong.
is_endbr() is called in __ftrace_return_to_handler -> fprobe_return
-> kprobe_multi_link_exit_handler -> is_endbr.
To fix this issue, acquire ftrace_test_recursion_trylock() in the
__ftrace_return_to_handler() after unwind the shadow stack to mark
this section must prevent recursive call of fgraph inside user-defined
fgraph_ops::retfunc().
This is essentially a fix to commit 4346ba1604 ("fprobe: Rewrite
fprobe on function-graph tracer"), because before that fgraph was
only used from the function graph tracer. Fprobe allowed user to run
any callbacks from fgraph after that commit.
Reported-by: Menglong Dong <menglong8.dong@gmail.com>
Closes: https://lore.kernel.org/all/20250918120939.1706585-1-dongml2@chinatelecom.cn/
Fixes: 4346ba1604 ("fprobe: Rewrite fprobe on function-graph tracer")
Cc: stable@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/175852292275.307379.9040117316112640553.stgit@devnote2
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Menglong Dong <menglong8.dong@gmail.com>
Acked-by: Menglong Dong <menglong8.dong@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The condition to check if the actions buffer needs to be resized was
incorrect. The check `self->size >= self->len` would evaluate to
true on almost every call to `actions_new()`, causing the buffer to
be reallocated unnecessarily each time an action was added.
Fix the condition to `self->len >= self.size`, ensuring
that the buffer is only resized when it is actually full.
Cc: John Kacur <jkacur@redhat.com>
Cc: Luis Goncalves <lgoncalv@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Chang Yin <cyin@redhat.com>
Cc: Costa Shulyupin <costa.shul@redhat.com>
Cc: Crystal Wood <crwood@redhat.com>
Cc: Gabriele Monaco <gmonaco@redhat.com>
Link: https://lore.kernel.org/20250915181101.52513-1-wander@redhat.com
Fixes: 6ea082b171 ("rtla/timerlat: Add action on threshold feature")
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Reviewed-by: Tomas Glozar <tglozar@redhat.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Two small RISC-V fixes for v6.17-rc8:
- A race-free implementation of pudp_huge_get_and_clear() (based on the x86
code)
- A MAINTAINERS update to my E-mail address
-----BEGIN PGP SIGNATURE-----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=/91y
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-v6.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
- A race-free implementation of pudp_huge_get_and_clear() (based on the
x86 code)
- A MAINTAINERS update to my E-mail address
* tag 'riscv-for-linus-v6.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
MAINTAINERS: Update Paul Walmsley's E-mail address
riscv: Use an atomic xchg in pudp_huge_get_and_clear()
of certain boot command line options, and re-enable CONFIG_PTDUMP
on i386 that was mistakenly turned off in the Kconfig.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=qhdq
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Fix a CPU topology code regression that caused the mishandling of
certain boot command line options, and re-enable CONFIG_PTDUMP on i386
that was mistakenly turned off in the Kconfig"
* tag 'x86-urgent-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/topology: Implement topology_is_core_online() to address SMT regression
x86/Kconfig: Reenable PTDUMP on i386
leaving the dl_server stuck, and a dl_server throttling
bug causing lag to fair tasks.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=9ZgA
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
"Fix two dl_server regressions: a race that can end up leaving the
dl_server stuck, and a dl_server throttling bug causing lag to fair
tasks"
* tag 'sched-urgent-2025-09-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/deadline: Fix dl_server behaviour
sched/deadline: Fix dl_server getting stuck
-----BEGIN PGP SIGNATURE-----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=cYD6
-----END PGP SIGNATURE-----
Merge tag 'v6.17rc7-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull smb client fixes from Steve French:
- Fix unlink bug
- Fix potential out of bounds access in processing compound requests
* tag 'v6.17rc7-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix wrong index reference in smb2_compound_op()
smb: client: handle unlink(2) of files open by different clients
- mediatek: Make sure MT8195 AUDIO power domain isn't left powered-on
-----BEGIN PGP SIGNATURE-----
iQJLBAABCgA1FiEEugLDXPmKSktSkQsV/iaEJXNYjCkFAmjWicoXHHVsZi5oYW5z
c29uQGxpbmFyby5vcmcACgkQ/iaEJXNYjCme8A/+LBPtC7wv2bIxJP3EDZM6DkNg
naIxZI/m4xoSK2RtSGu5LHf4ggr+DImJHixKQARBlLoDJxAY7zlfgJziNPSL3yp5
mw4CQpTAb0GjJQmEonj1r3Am7foLEUARuG3YR5Uk5r5f+jEWHkNqu0kmTiz17I12
Ueed89yYnMPE/ex0TY40Z0XS4t5esypD//bSnJ1zyAPg1g/58e1vWLVHNPvVxaZv
lbI30ADMQkJ7ef4ibMl3VAgm6LDyJQUOqFxlKGTFfJdpLC7pKlXq8bGTFB24NKSH
1e1CRlsn2Mi4dTcj8zqj+IhhM4uqDAjEezIB26PahKFl/yrW8tlvLp4m14nbFSaK
uj+sQQw9R1PvcuLvxlFVrxF/J180kyeT0ReLcEN1C97EcVs8EZpcde/g3NAa22Rm
9WpM8NSupyMHqGPhgTA1YVQh6cSt5g19b3FQYTlMJp8G4kO2nJoqZYwl6OiHAMqc
YdXC7qOchMBTk2G9uIxKrKKss/M3/a8X9qUVxjw61M6P/PEzqlNZGICzv2wKvzF6
L+MLzoj7MqG4H3HXx6iQtszRFEbLpa0uzt6sD+SGIaG6EAm4IxNoovV1BGYyRDFZ
g4asVAa0Qz9VUkH8xalyQ7HPCUeg6EQ2153FzScd849XZFzb0tj8+uquhPg58bB6
y+u/byT1ZQDXXyW7EJE=
=c/ev
-----END PGP SIGNATURE-----
Merge tag 'pmdomain-v6.17-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm
Pull pmdomain fix from Ulf Hansson:
- mediatek: Make sure MT8195 AUDIO power domain isn't left powered-on
* tag 'pmdomain-v6.17-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: mediatek: set default off flag for MT8195 AUDIO power domain
Fixes and New HW Supoort
- amd/pmc: Use 8042 quirk for Stellaris Slim Gen6 AMD
- dell: Set USTT mode according to BIOS after reboot
- dell-lis3lv02d: Add Latitude E6530
- lg-laptop: Fix setting the fan mode
The following is an automated shortlog grouped by driver:
amd/pmc:
- Add Stellaris Slim Gen6 AMD to spurious 8042 quirks list
dell-lis3lv02d:
- Add Latitude E6530
dell:
- Set USTT mode according to BIOS after reboot
lg-laptop:
- Fix WMAB call in fan_mode_store()
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSCSUwRdwTNL2MhaBlZrE9hU+XOMQUCaNaJCgAKCRBZrE9hU+XO
MdkhAQDsxiGH0G0bCEzmluHOyBJCGYAU9N2FXr2q4JO2ykzFCAD/e/62TuD6lQuP
75aQV+h2eBn7oOOG576ROTYZ2g8M1gc=
=U7jd
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v6.17-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Ilpo Järvinen:
"Fixes and New HW Supoort
- amd/pmc: Use 8042 quirk for Stellaris Slim Gen6 AMD
- dell: Set USTT mode according to BIOS after reboot
- dell-lis3lv02d: Add Latitude E6530
- lg-laptop: Fix setting the fan mode"
* tag 'platform-drivers-x86-v6.17-5' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: lg-laptop: Fix WMAB call in fan_mode_store()
platform/x86: dell-lis3lv02d: Add Latitude E6530
platform/x86/dell: Set USTT mode according to BIOS after reboot
platform/x86/amd/pmc: Add Stellaris Slim Gen6 AMD to spurious 8042 quirks list
- allow looking up GPIOs by the secondary firmware node too
- fix memory leak in gpio-regmap
-----BEGIN PGP SIGNATURE-----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=tnUa
-----END PGP SIGNATURE-----
Merge tag 'gpio-fixes-for-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- allow looking up GPIOs by the secondary firmware node too
- fix memory leak in gpio-regmap
* tag 'gpio-fixes-for-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: regmap: fix memory leak of gpio_regmap structure
gpiolib: Extend software-node support to support secondary software-nodes