xe_sync_entry_parse() can allocate references (syncobj, fence, chain fence,
or user fence) before hitting a later failure path. Several of those paths
returned directly, leaving partially initialized state and leaking refs.
Route these error paths through a common free_sync label and call
xe_sync_entry_cleanup(sync) before returning the error.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260219233516.2938172-5-shuicheng.lin@intel.com
(cherry picked from commit f939bdd920)
Cc: stable@vger.kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
This adds a check for encryption key size upon receiving
L2CAP_LE_CONN_REQ which is required by L2CAP/LE/CFC/BV-15-C which
expects L2CAP_CR_LE_BAD_KEY_SIZE.
Link: https://lore.kernel.org/linux-bluetooth/5782243.rdbgypaU67@n9w6sw14/
Fixes: 27e2d4c8d2 ("Bluetooth: Add basic LE L2CAP connect request receiving support")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Christian Eggers <ceggers@arri.de>
Upon receiving L2CAP_ECRED_CONN_REQ the given MTU shall be checked
against the suggested MTU of the listening socket as that is required
by the likes of PTS L2CAP/ECFC/BV-27-C test which expects
L2CAP_CR_LE_UNACCEPT_PARAMS if the MTU is lowers than socket omtu.
In order to be able to set chan->omtu the code now allows setting
setsockopt(BT_SNDMTU), but it is only allowed when connection has not
been stablished since there is no procedure to reconfigure the output
MTU.
Link: https://github.com/bluez/bluez/issues/1895
Fixes: 15f02b9105 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the condition for sending the LE Set Host Feature command.
The command is sent to indicate host support for Connected Isochronous
Streams in this case. It has been observed that the system could not
initialize BIS-only capable controllers because the controllers do not
support the command.
As per Core v6.2 | Vol 4, Part E, Table 3.1 the command shall be
supported if CIS Central or CIS Peripheral is supported; otherwise,
the command is optional.
Fixes: 709788b154 ("Bluetooth: hci_core: Fix using {cis,bis}_capable for current settings")
Cc: stable@vger.kernel.org
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The current cpuset partition code is able to dynamically update
the sched domains of a running system and the corresponding
HK_TYPE_DOMAIN housekeeping cpumask to perform what is essentially the
"isolcpus=domain,..." boot command line feature at run time.
The housekeeping cpumask update requires flushing a number of different
workqueues which may not be safe with cpus_read_lock() held as the
workqueue flushing code may acquire cpus_read_lock() or acquiring locks
which have locking dependency with cpus_read_lock() down the chain. Below
is an example of such circular locking problem.
======================================================
WARNING: possible circular locking dependency detected
6.18.0-test+ #2 Tainted: G S
------------------------------------------------------
test_cpuset_prs/10971 is trying to acquire lock:
ffff888112ba4958 ((wq_completion)sync_wq){+.+.}-{0:0}, at: touch_wq_lockdep_map+0x7a/0x180
but task is already holding lock:
ffffffffae47f450 (cpuset_mutex){+.+.}-{4:4}, at: cpuset_partition_write+0x85/0x130
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #4 (cpuset_mutex){+.+.}-{4:4}:
-> #3 (cpu_hotplug_lock){++++}-{0:0}:
-> #2 (rtnl_mutex){+.+.}-{4:4}:
-> #1 ((work_completion)(&arg.work)){+.+.}-{0:0}:
-> #0 ((wq_completion)sync_wq){+.+.}-{0:0}:
Chain exists of:
(wq_completion)sync_wq --> cpu_hotplug_lock --> cpuset_mutex
5 locks held by test_cpuset_prs/10971:
#0: ffff88816810e440 (sb_writers#7){.+.+}-{0:0}, at: ksys_write+0xf9/0x1d0
#1: ffff8891ab620890 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0x260/0x5f0
#2: ffff8890a78b83e8 (kn->active#187){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x2b6/0x5f0
#3: ffffffffadf32900 (cpu_hotplug_lock){++++}-{0:0}, at: cpuset_partition_write+0x77/0x130
#4: ffffffffae47f450 (cpuset_mutex){+.+.}-{4:4}, at: cpuset_partition_write+0x85/0x130
Call Trace:
<TASK>
:
touch_wq_lockdep_map+0x93/0x180
__flush_workqueue+0x111/0x10b0
housekeeping_update+0x12d/0x2d0
update_parent_effective_cpumask+0x595/0x2440
update_prstate+0x89d/0xce0
cpuset_partition_write+0xc5/0x130
cgroup_file_write+0x1a5/0x680
kernfs_fop_write_iter+0x3df/0x5f0
vfs_write+0x525/0xfd0
ksys_write+0xf9/0x1d0
do_syscall_64+0x95/0x520
entry_SYSCALL_64_after_hwframe+0x76/0x7e
To avoid such a circular locking dependency problem, we have to
call housekeeping_update() without holding the cpus_read_lock() and
cpuset_mutex. The current set of wq's flushed by housekeeping_update()
may not have work functions that call cpus_read_lock() directly,
but we are likely to extend the list of wq's that are flushed in the
future. Moreover, the current set of work functions may hold locks that
may have cpu_hotplug_lock down the dependency chain.
So housekeeping_update() is now called after releasing cpus_read_lock
and cpuset_mutex at the end of a cpuset operation. These two locks are
then re-acquired later before calling rebuild_sched_domains_locked().
To enable mutual exclusion between the housekeeping_update() call and
other cpuset control file write actions, a new top level cpuset_top_mutex
is introduced. This new mutex will be acquired first to allow sharing
variables used by both code paths. However, cpuset update from CPU
hotplug can still happen in parallel with the housekeeping_update()
call, though that should be rare in production environment.
As cpus_read_lock() is now no longer held when
tmigr_isolated_exclude_cpumask() is called, it needs to acquire it
directly.
The lockdep_is_cpuset_held() is also updated to return true if either
cpuset_top_mutex or cpuset_mutex is held.
Fixes: 03ff735101 ("cpuset: Update HK_TYPE_DOMAIN cpumask from cpuset")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The cpuset_handle_hotplug() may need to invoke housekeeping_update(),
for instance, when an isolated partition is invalidated because its
last active CPU has been put offline.
As we are going to enable dynamic update to the nozh_full housekeeping
cpumask (HK_TYPE_KERNEL_NOISE) soon with the help of CPU hotplug,
allowing the CPU hotplug path to call into housekeeping_update() directly
from update_isolation_cpumasks() will likely cause deadlock. So we
have to defer any call to housekeeping_update() after the CPU hotplug
operation has finished. This is now done via the workqueue where
the update_hk_sched_domains() function will be invoked via the
hk_sd_workfn().
An concurrent cpuset control file write may have executed the required
update_hk_sched_domains() function before the work function is called. So
the work function call may become a no-op when it is invoked.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
With the latest changes in sched/isolation.c, rebuild_sched_domains*()
requires the HK_TYPE_DOMAIN housekeeping cpumask to be properly
updated first, if needed, before the sched domains can be
rebuilt. So the two naturally fit together. Do that by creating a new
update_hk_sched_domains() helper to house both actions.
The name of the isolated_cpus_updating flag to control the
call to housekeeping_update() is now outdated. So change it to
update_housekeeping to better reflect its purpose. Also move the call
to update_hk_sched_domains() to the end of cpuset and hotplug operations
before releasing the cpuset_mutex.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The "S+" command is used in the test matrix to enable the cpuset
controller. However this can be done automatically and we never use the
"S-" command to disable cpuset controller. Simplify the test matrix and
reduce clutter by removing the command and doing that automatically.
There is no functional change to the test cases.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
As cpuset is updating HK_TYPE_DOMAIN housekeeping mask when there is
a change in the set of isolated CPUs, making this change is now more
costly than before. Right now, the isolated_cpus_updating flag can be
set even if there is no real change in isolated_cpus. Put in additional
checks to make sure that isolated_cpus_updating is set only if there
is a real change in isolated_cpus.
Reviewed-by: Chen Ridong <chenridong@huaweicloud.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Clarify the locking rules associated with file level internal variables
inside the cpuset code. There is no functional change.
Reviewed-by: Chen Ridong <chenridong@huaweicloud.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Commit e2ffe502ba ("cgroup/cpuset: Add cpuset.cpus.exclusive for v2")
incorrectly changed the 2nd parameter of cpuset_update_tasks_cpumask()
from tmp->new_cpus to cp->effective_cpus. This second parameter is just
a temporary cpumask for internal use. The cpuset_update_tasks_cpumask()
function was originally called update_tasks_cpumask() before commit
381b53c3b5 ("cgroup/cpuset: rename functions shared between v1
and v2").
This mistake can incorrectly change the effective_cpus of the
cpuset when it is the top_cpuset or in arm64 architecture where
task_cpu_possible_mask() may differ from cpu_possible_mask. So far
top_cpuset hasn't been passed to update_cpumasks_hier() yet, but arm64
arch can still be impacted. Fix it by reverting the incorrect change.
Fixes: e2ffe502ba ("cgroup/cpuset: Add cpuset.cpus.exclusive for v2")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The effective_xcpus of a cpuset can contain offline CPUs. In
partition_xcpus_del(), the xcpus parameter is incorrectly used as
a temporary cpumask to mask out offline CPUs. As xcpus can be the
effective_xcpus of a cpuset, this can result in unexpected changes
in that cpumask. Fix this problem by not making any changes to the
xcpus parameter.
Fixes: 11e5f407b6 ("cgroup/cpuset: Keep track of CPUs in isolated partitions")
Reviewed-by: Chen Ridong <chenridong@huaweicloud.com>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Similar to 03dba9cea7 ("Bluetooth: L2CAP: Fix not responding with
L2CAP_CR_LE_ENCRYPTION") the result code L2CAP_CR_LE_ENCRYPTION shall
be used when BT_SECURITY_MEDIUM is set since that means security mode 2
which mean it doesn't require authentication which results in
qualification test L2CAP/ECFC/BV-32-C failing.
Link: https://github.com/bluez/bluez/issues/1871
Fixes: 15f02b9105 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The setup process previously combined error handling and retry gating
under one condition. As a result, the final failed attempt exited
without performing cleanup.
Update the failure path to always perform power and port cleanup on
setup failure, and reopen the port only when retrying.
Fixes: 9e80587aba ("Bluetooth: hci_qca: Enhance retry logic in qca_setup")
Signed-off-by: Jinwang Li <jinwang.li@oss.qualcomm.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When TX timestamping is enabled via SO_TIMESTAMPING, SKBs may be queued
into sk_error_queue and will stay there until consumed. If userspace never
gets to read the timestamps, or if the controller is removed unexpectedly,
these SKBs will leak.
Fix by adding skb_queue_purge() calls for sk_error_queue in affected
bluetooth destructors. RFCOMM does not currently use sk_error_queue.
Fixes: 134f4b39df ("Bluetooth: add support for skb TX SND/COMPLETION timestamping")
Reported-by: syzbot+7ff4013eabad1407b70a@syzkaller.appspotmail.com
Closes: https://syzbot.org/bug?extid=7ff4013eabad1407b70a
Cc: stable@vger.kernel.org
Signed-off-by: Heitor Alves de Siqueira <halves@igalia.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Test L2CAP/ECFC/BV-26-C expect the response to L2CAP_ECRED_CONN_REQ with
and MTU value < L2CAP_ECRED_MIN_MTU (64) to be L2CAP_CR_LE_INVALID_PARAMS
rather than L2CAP_CR_LE_UNACCEPT_PARAMS.
Also fix not including the correct number of CIDs in the response since
the spec requires all CIDs being rejected to be included in the
response.
Link: https://github.com/bluez/bluez/issues/1868
Fixes: 15f02b9105 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes responding with an invalid result caused by checking the
wrong size of CID which should have been (cmd_len - sizeof(*req)) and
on top of it the wrong result was use L2CAP_CR_LE_INVALID_PARAMS which
is invalid/reserved for reconf when running test like L2CAP/ECFC/BI-03-C:
> ACL Data RX: Handle 64 flags 0x02 dlen 14
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
MTU: 64
MPS: 64
Source CID: 64
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reserved (0x000c)
Result: Reconfiguration failed - one or more Destination CIDs invalid (0x0003)
Fiix L2CAP/ECFC/BI-04-C which expects L2CAP_RECONF_INVALID_MPS (0x0002)
when more than one channel gets its MPS reduced:
> ACL Data RX: Handle 64 flags 0x02 dlen 16
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 8
MTU: 264
MPS: 99
Source CID: 64
! Source CID: 65
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration successful (0x0000)
Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)
Fix L2CAP/ECFC/BI-05-C when SCID is invalid (85 unconnected):
> ACL Data RX: Handle 64 flags 0x02 dlen 14
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
MTU: 65
MPS: 64
! Source CID: 85
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration successful (0x0000)
Result: Reconfiguration failed - one or more Destination CIDs invalid (0x0003)
Fix L2CAP/ECFC/BI-06-C when MPS < L2CAP_ECRED_MIN_MPS (64):
> ACL Data RX: Handle 64 flags 0x02 dlen 14
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 2 len 6
MTU: 672
! MPS: 63
Source CID: 64
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)
Result: Reconfiguration failed - other unacceptable parameters (0x0004)
Fix L2CAP/ECFC/BI-07-C when MPS reduced for more than one channel:
> ACL Data RX: Handle 64 flags 0x02 dlen 16
LE L2CAP: Enhanced Credit Reconfigure Request (0x19) ident 3 len 8
MTU: 84
! MPS: 71
Source CID: 64
! Source CID: 65
< ACL Data TX: Handle 64 flags 0x00 dlen 10
LE L2CAP: Enhanced Credit Reconfigure Respond (0x1a) ident 2 len 2
! Result: Reconfiguration successful (0x0000)
Result: Reconfiguration failed - reduction in size of MPS not allowed for more than one channel at a time (0x0002)
Link: https://github.com/bluez/bluez/issues/1865
Fixes: 15f02b9105 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The addition of dmabuf support in uverbs means that it is no
longer possible to build infiniband support if that is disabled:
arm-linux-gnueabi-ld: drivers/infiniband/core/ib_core_uverbs.o: in function `rdma_user_mmap_entry_remove.part.0':
ib_core_uverbs.c:(.text+0x508): undefined reference to `dma_buf_move_notify'
(dma_buf_move_notify): Unknown destination type (ARM/Thumb) in drivers/infiniband/core/ib_core_uverbs.o
ib_core_uverbs.c:(.text+0x518): undefined reference to `dma_resv_wait_timeout'
(dma_resv_wait_timeout): Unknown destination type (ARM/Thumb) in drivers/infiniband/core/ib_core_uverbs.o
Select this from Kconfig, as we do for the other users.
Fixes: 0ac6f4056c ("RDMA/uverbs: Add DMABUF object type and operations")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20260216121213.2088910-1-arnd@kernel.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
The module loader doesn't check for bounds of the ELF section index in
simplify_symbols():
for (i = 1; i < symsec->sh_size / sizeof(Elf_Sym); i++) {
const char *name = info->strtab + sym[i].st_name;
switch (sym[i].st_shndx) {
case SHN_COMMON:
[...]
default:
/* Divert to percpu allocation if a percpu var. */
if (sym[i].st_shndx == info->index.pcpu)
secbase = (unsigned long)mod_percpu(mod);
else
/** HERE --> **/ secbase = info->sechdrs[sym[i].st_shndx].sh_addr;
sym[i].st_value += secbase;
break;
}
}
A symbol with an out-of-bounds st_shndx value, for example 0xffff
(known as SHN_XINDEX or SHN_HIRESERVE), may cause a kernel panic:
BUG: unable to handle page fault for address: ...
RIP: 0010:simplify_symbols+0x2b2/0x480
...
Kernel panic - not syncing: Fatal exception
This can happen when module ELF is legitimately using SHN_XINDEX or
when it is corrupted.
Add a bounds check in simplify_symbols() to validate that st_shndx is
within the valid range before using it.
This issue was discovered due to a bug in llvm-objcopy, see relevant
discussion for details [1].
[1] https://lore.kernel.org/linux-modules/20251224005752.201911-1-ihor.solodrai@linux.dev/
Signed-off-by: Ihor Solodrai <ihor.solodrai@linux.dev>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
This config option goes way back - it used to be an internal debug
option to random.c (at that point called DEBUG_RANDOM_BOOT), then was
renamed and exposed as a config option as CONFIG_WARN_UNSEEDED_RANDOM,
and then further renamed to the current CONFIG_WARN_ALL_UNSEEDED_RANDOM.
It was all done with the best of intentions: the more limited
rate-limited reports were reporting some cases, but if you wanted to see
all the gory details, you'd enable this "ALL" option.
However, it turns out - perhaps not surprisingly - that when people
don't care about and fix the first rate-limited cases, they most
certainly don't care about any others either, and so warning about all
of them isn't actually helping anything.
And the non-ratelimited reporting causes problems, where well-meaning
people enable debug options, but the excessive flood of messages that
nobody cares about will hide actual real information when things go
wrong.
I just got a kernel bug report (which had nothing to do with randomness)
where two thirds of the the truncated dmesg was just variations of
random: get_random_u32 called from __get_random_u32_below+0x10/0x70 with crng_init=0
and in the process early boot messages had been lost (in addition to
making the messages that _hadn't_ been lost harder to read).
The proper way to find these things for the hypothetical developer that
cares - if such a person exists - is almost certainly with boot time
tracing. That gives you the option to get call graphs etc too, which is
likely a requirement for fixing any problems anyway.
See Documentation/trace/boottime-trace.rst for that option.
And if we for some reason do want to re-introduce actual printing of
these things, it will need to have some uniqueness filtering rather than
this "just print it all" model.
Fixes: cc1e127bfa ("random: remove ratelimiting for in-kernel unseeded randomness")
Acked-by: Jason Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When generating the default LRC, if a register is not masked, we apply
any save-restore programming necessary via a read-modify-write sequence
that will ensure we only update the relevant bits/fields without
clobbering the rest of the register. However some of the registers that
need to be updated might be MCR registers which require steering to a
non-terminated instance to ensure we can read back a valid, non-zero
value. The steering of reads originating from a command streamer is
controlled by register CS_MMIO_GROUP_INSTANCE_SELECT. Emit additional
MI_LRI commands to update the steering before any RMW of an MCR register
to ensure the reads are performed properly.
Note that needing to perform a RMW of an MCR register while building the
default LRC is pretty rare. Most of the MCR registers that are part of
an engine's LRCs are also masked registers, so no MCR is necessary.
Fixes: f2f90989cc ("drm/xe: Avoid reading RMW registers in emit_wa_job")
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Balasubramani Vivekanandan <balasubramani.vivekanandan@intel.com>
Link: https://patch.msgid.link/20260206223058.387014-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit 6c2e331c91)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Moving the symbol devm_cxl_add_nvdimm_bridge() to
drivers/cxl/cxl_pmem.c, so that cxl_pmem can export a symbol that gives
cxl_acpi a depedency on cxl_pmem kernel module. This is a prepatory patch
to resolve the issue of a race for nvdimm_bus object that is created
during cxl_acpi_probe().
No functional changes besides moving code.
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Acked-by: Ira Weiny <ira.weiny@intel.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com?>
Link: https://patch.msgid.link/20260205001633.1813643-2-dave.jiang@intel.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
The header <unistd.h> is included twice in rt_stall.c. Remove the
redundant inclusion to clean up the code.
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The '-f' option is defined in getopt() but not handled in the switch
statement or documented in the help text. Providing '-f' currently
triggers the default error path.
Remove it to sync the optstring with the actual implementation.
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The '-p' option is defined in getopt() but not handled in the switch
statement or documented in the help text. Providing '-p' currently
triggers the default error path.
Remove it to sync the optstring with the actual implementation.
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The read() call in run_test() triggers a warn_unused_result compiler
warning, which breaks the build under -Werror.
Check the return value of read() and exit the child process on failure to
satisfy the compiler and handle pipe read errors.
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The module Kconfig file contains a set of options related to "Module
versioning support" (depends on MODVERSIONS) and "Module signature
verification" (depends on MODULE_SIG). The Kconfig tool automatically
creates submenus when an entry for a symbol is followed by consecutive
items that all depend on the symbol. However, this functionality doesn't
work for the mentioned module options. The MODVERSIONS options are
interleaved with ASM_MODVERSIONS, which has no 'depends on MODVERSIONS' but
instead uses 'default HAVE_ASM_MODVERSIONS && MODVERSIONS'. Similarly, the
MODULE_SIG options are interleaved by a comment warning not to forget
signing modules with scripts/sign-file, which uses the condition 'depends
on MODULE_SIG_FORCE && !MODULE_SIG_ALL'.
The result is that the options are confusingly shown when using
a menuconfig tool, as follows:
[*] Module versioning support
Module versioning implementation (genksyms (from source code)) --->
[ ] Extended Module Versioning Support
[*] Basic Module Versioning Support
[*] Source checksum for all modules
[*] Module signature verification
[ ] Require modules to be validly signed
[ ] Automatically sign all modules
Hash algorithm to sign modules (SHA-256) --->
Fix the issue by using if/endif to group related options together in
kernel/module/Kconfig, similarly to how the MODULE_DEBUG options are
already grouped. Note that the signing-related options depend on
'MODULE_SIG || IMA_APPRAISE_MODSIG', with the exception of
MODULE_SIG_FORCE, which is valid only for MODULE_SIG and is therefore kept
separately. For consistency, do the same for the MODULE_COMPRESS entries.
The options are then properly placed into submenus, as follows:
[*] Module versioning support
Module versioning implementation (genksyms (from source code)) --->
[ ] Extended Module Versioning Support
[*] Basic Module Versioning Support
[*] Source checksum for all modules
[*] Module signature verification
[ ] Require modules to be validly signed
[ ] Automatically sign all modules
Hash algorithm to sign modules (SHA-256) --->
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
In the error path of load_module(), under the free_module label, the
code calls lockdep_free_key_range() to release lock classes associated
with the MOD_DATA, MOD_RODATA and MOD_RO_AFTER_INIT module regions, and
subsequently invokes module_deallocate().
Since commit ac3b432839 ("module: replace module_layout with
module_memory"), the module_deallocate() function calls free_mod_mem(),
which releases the lock classes as well and considers all module
regions.
Attempting to free these classes twice is unnecessary. Remove the
redundant code in load_module().
Fixes: ac3b432839 ("module: replace module_layout with module_memory")
Signed-off-by: Petr Pavlu <petr.pavlu@suse.com>
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Reviewed-by: Aaron Tomlin <atomlin@atomlin.com>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
The default_gfp() helper that I added is not wrong, but it turns out
that it causes unnecessary headaches for 'sparse' which doesn't support
the use of __VA_OPT__ (introduced in C++20 and C23, and supported by gcc
and clang for a long time).
We do already use __VA_OPT__ in some other cases in the kernel (drm/xe
and btrfs), but it has been fairly limited. Now it triggers for pretty
much everything, and sparse ends up not working at all.
We can use the traditional gcc ',##__VA_ARGS__' syntax instead: it may
not be the "C standard" way and is slightly less natural in this
context, but it is the traditional model for this and avoids the sparse
problem.
Reported-and-tested-by: Ricardo Ribalda <ribalda@chromium.org>
Reported-and-tested-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reported-by: Ben Dooks <ben.dooks@codethink.co.uk>
Fixes: e19e1b480a ("add default_gfp() helper macro and use it in the new *alloc_obj() helpers")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The count field in the command header is used to determine the valid
payload size. Verify that the valid payload does not exceed the remaining
buffer space.
Fixes: aac243092b ("accel/amdxdna: Add command execution")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260219211946.1920485-1-lizhi.hou@amd.com
The ubuf size calculation may overflow, resulting in an undersized
allocation and possible memory corruption.
Use check_add_overflow() helpers to validate the size calculation before
allocation.
Fixes: bd72d4acda ("accel/amdxdna: Support user space allocated buffer")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260217192815.1784689-1-lizhi.hou@amd.com
The remaining space in a command slot may be smaller than the size of
the command header. Clearing the command header with memset() before
verifying the available slot space can result in an out-of-bounds write
and memory corruption.
Fix this by moving the memset() call after the size validation.
Fixes: 3d32eb7a5e ("accel/amdxdna: Fix cu_idx being cleared by memset() during command setup")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260217185415.1781908-1-lizhi.hou@amd.com
When a hardware context is suspended, the job scheduler is stopped. If a
command is submitted while the context is suspended, the job is queued in
the scheduler but aie2_sched_job_run() is never invoked to restart the
hardware context. As a result, the command hangs.
Fix this by modifying the hardware context suspend routine to keep the job
scheduler running so that queued jobs can trigger context restart properly.
Fixes: aac243092b ("accel/amdxdna: Add command execution")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260211205341.722982-1-lizhi.hou@amd.com
Enabling turbo mode disables hardware clock gating. Suspend requires
hardware clock gating to be re-enabled, otherwise suspend will fail.
Fix this by calling aie2_runtime_cfg() from aie2_hw_stop() to
re-enable clock gating during suspend. Also ensure that firmware is
initialized in aie2_hw_start() before modifying clock-gating
settings during resume.
Fixes: f4d7b8a6bc ("accel/amdxdna: Enhance power management settings")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260211204716.722788-1-lizhi.hou@amd.com
When an application issues a query IOCTL while auto suspend is running,
a deadlock can occur. The query path holds dev_lock and then calls
pm_runtime_resume_and_get(), which waits for the ongoing suspend to
complete. Meanwhile, the suspend callback attempts to acquire dev_lock
and blocks, resulting in a deadlock.
Fix this by releasing dev_lock before calling pm_runtime_resume_and_get()
and reacquiring it after the call completes. Also acquire dev_lock in the
resume callback to keep the locking consistent.
Fixes: 063db45183 ("accel/amdxdna: Enhance runtime power management")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260211204644.722758-1-lizhi.hou@amd.com
During process termination, several error messages are logged that are
not actual errors but expected conditions when a process is killed or
interrupted. This creates unnecessary noise in the kernel log.
The specific scenarios are:
1. HMM invalidation returns -ERESTARTSYS when the wait is interrupted by
a signal during process cleanup. This is expected when a process is
being terminated and should not be logged as an error.
2. Context destruction returns -ENODEV when the firmware or device has
already stopped, which commonly occurs during cleanup if the device
was already torn down. This is also an expected condition during
orderly shutdown.
Downgrade these expected error conditions from error level to debug level
to reduce log noise while still keeping genuine errors visible.
Fixes: 97f2757383 ("accel/amdxdna: Fix potential NULL pointer dereference in context cleanup")
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260210164521.1094274-3-mario.limonciello@amd.com
If userspace issues an ioctl to destroy a hardware context that has
already been automatically suspended, the driver may crash because the
mailbox channel pointer is NULL for the suspended context.
Fix this by checking the mailbox channel pointer in aie2_destroy_context()
before accessing it.
Fixes: 97f2757383 ("accel/amdxdna: Fix potential NULL pointer dereference in context cleanup")
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260206060306.4050531-1-lizhi.hou@amd.com
Preempt commands are only supported when submitted as chained commands.
To ensure preempt support works consistently, always submit commands in
chained command format.
Set force_cmdlist to true so that single commands are filled using the
chained command layout, enabling correct handling of preempt commands.
Fixes: 3a0ff7b98a ("accel/amdxdna: Support preemption requests")
Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260206060251.4050512-1-lizhi.hou@amd.com
Large command buffers may be used, and they do not always need to be
mapped or accessed by the driver. Performing a size check at command BO
creation time unnecessarily rejects valid use cases.
Remove the buffer size check from command BO creation, and defer vmap
and size validation to the paths where the driver actually needs to map
and access the command buffer.
Fixes: ac49797c18 ("accel/amdxdna: Add GEM buffer object management")
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Lizhi Hou <lizhi.hou@amd.com>
Link: https://patch.msgid.link/20260206060237.4050492-1-lizhi.hou@amd.com
The runner sets exit_req on SIGINT/SIGTERM but ignores it during the
main loop. This prevents users from cleanly interrupting a test run.
Check exit_req each iteration to safely break out on exit signals.
Signed-off-by: Cheng-Yang Chou <yphbchou0911@gmail.com>
Acked-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
CXL testing environment can trigger following trace
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000092: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000490-0x0000000000000497]
RIP: 0010:cxl_dpa_to_region+0x105/0x1f0 [cxl_core]
Call Trace:
<TASK>
cxl_event_trace_record+0xd1/0xa70 [cxl_core]
__cxl_event_trace_record+0x12f/0x1e0 [cxl_core]
cxl_mem_get_records_log+0x261/0x500 [cxl_core]
cxl_mem_get_event_records+0x7c/0xc0 [cxl_core]
cxl_mock_mem_probe+0xd38/0x1c60 [cxl_mock_mem]
platform_probe+0x9d/0x130
really_probe+0x1c8/0x960
__driver_probe_device+0x187/0x3e0
driver_probe_device+0x45/0x120
__device_attach_driver+0x15d/0x280
When CXL subsystem adds a cxl port to a hierarchy, there is a small
window where the new port becomes visible before it is bound to a
driver. This happens because device_add() adds a device to bus device
list before bus_probe_device() binds it to a driver.
So if two cxl memdevs are trying to add a dport to a same port via
devm_cxl_enumerate_ports(), the second cxl memdev may observe the port
and attempt to add a dport, but fails because the port has not yet been
attached to cxl port driver. That causes the memdev->endpoint can not be
updated.
The sequence is like:
CPU 0 CPU 1
devm_cxl_enumerate_ports()
# port not found, add it
add_port_attach_ep()
# hold the parent port lock
# to add the new port
devm_cxl_create_port()
device_add()
# Add dev to bus devs list
bus_add_device()
devm_cxl_enumerate_ports()
# found the port
find_cxl_port_by_uport()
# hold port lock to add a dport
device_lock(the port)
find_or_add_dport()
cxl_port_add_dport()
return -ENXIO because port->dev.driver is NULL
device_unlock(the port)
bus_probe_device()
# hold the port lock
# for attaching
device_lock(the port)
attaching the new port
device_unlock(the port)
To fix this race, require that dport addition holds the host lock
of the target port(the host of CXL root and all cxl host bridge ports is
the platform firmware device, the host of all other ports is their
parent port). The CXL subsystem already requires holding the host lock
while attaching a new port. Therefore, successfully acquiring the host
lock guarantees that port attaching has completed.
Fixes: 4f06d81e7c ("cxl: Defer dport allocation for switch ports")
Signed-off-by: Li Ming <ming.li@zohomail.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Link: https://patch.msgid.link/20260210-fix-port-enumeration-failure-v3-2-06acce0b9ead@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
In CXL subsystem, a port has its own host device for the port creation
and removal. The host of CXL root and all the first level ports is the
platform firmware device, the host of other ports is their parent port's
device. Create this new helper to much easier to get the host of a cxl
port.
Introduce port_to_host() and use it to replace all places where using
open coded to get the host of a port.
Remove endpoint_host() as its functionality can be replaced by
port_to_host().
[dj: Squashed commit 1 and 3 in the series to commit 1. ]
Signed-off-by: Li Ming <ming.li@zohomail.com>
Tested-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Link: https://patch.msgid.link/20260210-fix-port-enumeration-failure-v3-1-06acce0b9ead@zohomail.com
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Commit 0c4762e268 ("KVM: arm64: nv: Avoid NV stage-2 code when NV is
not supported") added an early return to several functions in
arch/arm64/kvm/nested.c to prevent a UBSAN shift-out-of-bounds error
when accessing the pgt union for non-nested VMs.
However, this early return was inadvertently applied to
kvm_arch_flush_shadow_all() as well, causing it to skip the call to
kvm_uninit_stage2_mmu(kvm) for all non-nested VMs.
For pKVM, skipping this teardown means the host never unshares the
guest's memory with the EL2 hypervisor. When the host kernel later
recycles these leaked pages for a new VM, it attempts to re-share them.
The hypervisor correctly rejects this with -EPERM, triggering a host
WARN_ON and hanging the guest.
Fix this by dropping the early return from kvm_arch_flush_shadow_all().
The for-loop guarding the nested MMU cleanup already bounds itself when
nested_mmus_size == 0, allowing execution to proceed to
kvm_uninit_stage2_mmu() as intended.
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/all/60916cb6-f460-4751-b910-f63c58700ad0@sirena.org.uk/
Fixes: 0c4762e268 ("KVM: arm64: nv: Avoid NV stage-2 code when NV is not supported")
Signed-off-by: Fuad Tabba <tabba@google.com>
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://patch.msgid.link/20260222083352.89503-1-tabba@google.com
Signed-off-by: Marc Zyngier <maz@kernel.org>
On many devices, the user can toggle the Fn lock state by
pressing Fn + Esc. Forward the associated event to the fn_lock
sysfs attribute as a poll notification.
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260218005101.73680-5-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
It turns out that the FN lock status can be changed by the underlying
hardware when the user presses a special key combination. Mark the
associated register as volatile to prevent regmap from caching said
value. Also add the necessary suspend/resume handling.
Fixes: d050479693 ("platform/x86: Add Uniwill laptop driver")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260218005101.73680-4-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
On devices that have not UNIWILL_FEATURE_BATTERY set, the underlying
hardware might still send the UNIWILL_OSD_BATTERY_ALERT event. In such
a situation, the driver will access uninitialized data structures when
handling said event.
Prevent this by only handling the UNIWILL_OSD_BATTERY_ALERT event when
UNIWILL_FEATURE_BATTERY is set.
Fixes: d050479693 ("platform/x86: Add Uniwill laptop driver")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260218005101.73680-3-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
It turns out that both sysfs attributes actually directly control
the FN lock status/super key enable status, rather than the
triggering of the associated events. This behavior was first observed
on a Tuxedo notebook and was belived to be a hardware quirk.
However, it seems that i simply misunderstood the manual of the
OEM software for Intel NUC devices. The correct behavior is:
- fn_lock_toggle_enable enables/disables FN lock mode
- super_key_toggle_enable enables/disables the super key
Rename both sysfs attributes to avoid confusing users.
Fixes: d050479693 ("platform/x86: Add Uniwill laptop driver")
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Link: https://patch.msgid.link/20260218005101.73680-2-W_Armin@gmx.de
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
cxl_memdev_autoremove() takes device_lock(&cxlmd->dev) via guard(device)
and then calls cxl_memdev_unregister() when the attach callback was
provided but cxl_mem_probe() failed to bind.
cxl_memdev_unregister() calls
cdev_device_del()
device_del()
bus_remove_device()
device_release_driver()
This path is reached when a driver uses the @attach parameter to
devm_cxl_add_memdev() and the CXL topology fails to enumerate (e.g.
DVSEC range registers decode outside platform-defined CXL ranges,
causing the endpoint port probe to fail).
Add cxl_memdev_attach_failed() to set the scope of the check correctly.
Reported-by: kreview-c94b85d6d2
Fixes: 29317f8dc6 ("cxl/mem: Introduce cxl_memdev_attach for CXL-dependent operation")
Signed-off-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Link: https://patch.msgid.link/20260211192228.2148713-1-gourry@gourry.net
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
This patch adds more Fn hotkeys (like Refresh rate toggle).
Additionally, remap the setup key from KEY_SETUP to KEY_CONFIG.
As KEY_CONFIG is supported by Desktop Environments for launching
system settings, whereas KEY_SETUP is often ignored by userspace.
Signed-off-by: Jesse Guo <JesseGuoTech@outlook.com>
Reviewed-by: Gladyshev Ilya <foxido@foxido.dev>
Link: https://patch.msgid.link/TYCPR01MB6851636256C39B170F2312E5D192A@TYCPR01MB6851.jpnprd01.prod.outlook.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
