Alienware m18 laptops support G-Mode. Therefore, match them with
G-Series quirks.
Cc: stable@vger.kernel.org
Tested-by: Olexa Bilaniuk <obilaniu@gmail.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://patch.msgid.link/20260129-m18-gmode-v1-1-48be521487b9@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reverse engineering of the HP Omen Windows utility shows that for performance
mode it uses the same codes listed in hp_thermal_profile_omen_v1. Therefore it
seems sufficient to add the board model name to omen_thermal_profile_boards.
Tested on Omen 14-fb1xxx: CPU power in performance profile reaches the Windows
limit (65W), instead of 45W in automatic BIOS mode. Max fan speed was reached
as well.
Link: https://patch.msgid.link/20260203164832.40514-1-plotnikovanton@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
This patch enables Victus thermal profile support for the HP
Victus 16-d0xxx. It does so by adding model's DMI board name 88F8 to
victus_thermal_profile_boards.
Tested on a Victus 16-d0xxx:
- Victus thermal profile choices available (quiet, balanced, performance)
instead of the default ones (cool, quiet, balanced, performance);
- Profile switching works correctly;
- About 4% increase in FPS using benchmark Cyberpunk 2077 on
performance profile;
- No noticeable regressions.
Signed-off-by: Victor Lattaro Volpini <victorlattaro@proton.me>
Link: https://patch.msgid.link/20260210000048.250280-1-victorlattaro@proton.me
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Lenovo ThinkPad X1 Fold 16 Gen 1 has physical volume up/down
buttons that are handled through the intel-hid 5-button array
interface. The firmware does not advertise 5-button array support via
HEBC, so the driver relies on a DMI allowlist to enable it.
Add the ThinkPad X1 Fold 16 Gen 1 to the button_array_table so the
volume buttons work out of the box.
Signed-off-by: Leif Skunberg <diamondback@cohunt.app>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260210085625.34380-1-diamondback@cohunt.app
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Lenovo ThinkPad X1 Fold 16 Gen 1 has an OV5675 sensor (ACPI HID
OVTI5675) behind an INT3472 discrete PMIC controller. The INT3472
_DSM returns GPIO type 0x10 for one of the pins, which controls the
DOVDD (digital I/O power) regulator enable.
Type 0x10 is not currently handled by the driver, causing the GPIO to
be ignored with a warning. Add INT3472_GPIO_TYPE_DOVDD (0x10) and
handle it as a regulator with con_id "dovdd" to match the supply name
used by sensor drivers (e.g. ov5675).
Also increase GPIO_SUPPLY_NAME_LENGTH from 5 to 6 to accommodate
the "dovdd" name (5 chars + null terminator).
Signed-off-by: Leif Skunberg <diamondback@cohunt.app>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260210132129.17943-1-diamondback@cohunt.app
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
There is a race on checking the state in the sender, it needs to be
checked under a lock. But you also need a check to avoid issues with
a misbehaving BMC for run to completion mode. So leave the check at
the beginning for run to completion, and add a check under the lock
to avoid the race.
Reported-by: Rafael J. Wysocki <rafael@kernel.org>
Fixes: bc3a9d2177 ("ipmi:si: Gracefully handle if the BMC is non-functional")
Cc: stable@vger.kernel.org # 4.18
Signed-off-by: Corey Minyard <corey@minyard.net>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
It used to be, until recently, that the sender operation on the low
level interfaces would not fail. That's not the case any more with
recent changes.
So check the return value from the sender operation, and propagate it
back up from there and handle the errors in all places.
Reported-by: Rafael J. Wysocki <rafael@kernel.org>
Fixes: bc3a9d2177 ("ipmi:si: Gracefully handle if the BMC is non-functional")
Cc: stable@vger.kernel.org # 4.18
Signed-off-by: Corey Minyard <corey@minyard.net>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
If the BMC is in a bad state, don't bother waiting for queues messages
since there can't be any. Otherwise the unload is blocked until the
BMC is back in a good state.
Reported-by: Rafael J. Wysocki <rafael@kernel.org>
Fixes: bc3a9d2177 ("ipmi:si: Gracefully handle if the BMC is non-functional")
Cc: stable@vger.kernel.org # 4.18
Signed-off-by: Corey Minyard <corey@minyard.net>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
tps65185_probe() dereferences the allocation result immediately by using data->regmap. If devm_kzalloc() returns NULL under memory pressure, this leads to a NULL pointer dereference.
Add the missing allocation check and return -ENOMEM on failure.
Signed-off-by: Yufan Chen <ericterminal@gmail.com>
Link: https://patch.msgid.link/20260222104035.90790-1-ericterminal@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ASUS ExpertBook BM1503CDA (Ryzen 5 7535U, Barcelo-R) has an
internal DMIC connected through the AMD ACP (Audio CoProcessor)
but is missing from the DMI quirk table, so the acp6x machine
driver probe returns -ENODEV and no DMIC capture device is created.
Add the DMI entry so the internal microphone works out of the box.
Signed-off-by: Azamat Almazbek uulu <almazbek1608@gmail.com>
Reviewed-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20260221114813.5610-1-almazbek1608@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add TDP data for laptop model G733QS.
Signed-off-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260211212659.16542-1-denis.benato@linux.dev
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Dell 14 Plus 2-in-1 (model DB04250) requires the VGBS allow list
entry to correctly enable the tablet mode switch. Without this, the
chassis state is not reported, and the hinge rotation only emits
unknown scancodes.
Verified on Dell 14 Plus 2-in-1 DB04250.
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=221090
Signed-off-by: Peter Metz <peter.metz@unarin.com>
Reviewed-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260213044627.203638-1-peter.metz@unarin.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Check whether the battery supports the relevant charge threshold before
reading the value to silence these errors:
thinkpad_acpi: acpi_evalf(BCTG, dd, ...) failed: AE_NOT_FOUND
ACPI: \_SB_.PCI0.LPC_.EC__.HKEY: BCTG: evaluate failed
thinkpad_acpi: acpi_evalf(BCSG, dd, ...) failed: AE_NOT_FOUND
ACPI: \_SB_.PCI0.LPC_.EC__.HKEY: BCSG: evaluate failed
when reading the charge thresholds via sysfs on platforms that do not
support them such as the ThinkPad T400.
Fixes: 2801b9683f ("thinkpad_acpi: Add support for battery thresholds")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=202619
Signed-off-by: Jonathan Teh <jonathan.teh@outlook.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://patch.msgid.link/MI0P293MB01967B206E1CA6F337EBFB12926CA@MI0P293MB0196.ITAP293.PROD.OUTLOOK.COM
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Omen 16-wf0xxx (board ID: 8BAB) has the same WMI interface as
other Victus S boards, but requires quirks for correctly switching
thermal profile (similar to HP Omen 16-wf1xxx, board ID: 8C78).
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_thermal_params.
Testing on HP Omen 16-wf0xxx confirmed that platform profile is
registered successfully and fan RPMs are readable and controllable.
Suggested-by: Noah Provenzano <noahpro@gmail.com>
Tested-by: Juan Martin Morales <juanm4morales@gmail.com>
Reported-by: Juan Martin Morales <juanm4morales@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220639
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260216072003.90151-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The touchscreen on the SUPI S10 tablet reports inverted Y coordinates,
causing touch input to be mirrored vertically relative to the display.
Add a quirk to set the "touchscreen-inverted-y" boolean device-property
on the touchscreen device, so that the goodix_ts driver will fixup
the coordinates.
Reported-by: Yajat Kumar <yajatapps3@gmail.com>
Closes: https://lore.kernel.org/linux-input/20251230221639.582406-1-yajatapps3@gmail.com/
Tested-by: Yajat Kumar <yajatapps3@gmail.com>
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Link: https://patch.msgid.link/20260217132346.34535-1-johannes.goede@oss.qualcomm.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The HP Omen 16-xd0xxx (board ID: 8BCD) has the same WMI interface as
other Victus S boards, but requires quirks for correctly switching
thermal profile (similar to HP Omen 16-wf1xxx, board ID: 8C78).
Add the DMI board name to victus_s_thermal_profile_boards[] table and
map it to omen_v1_thermal_params.
Testing on HP Omen 16-xd0xxx confirmed that platform profile is
registered successfully and fan RPMs are readable and controllable.
Tested-by: Varad Amol Pisale <varadpisale.work@gmail.com>
Signed-off-by: Krishna Chomal <krishna.chomal108@gmail.com>
Link: https://patch.msgid.link/20260218050235.94687-1-krishna.chomal108@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The primary role of pm_runtime_put() is to decrement the runtime PM
usage counter of the given device. It always does that regardless of
the value returned by it later.
In addition, if the runtime PM usage counter after decrementation turns
out to be zero, a work item is queued up to check whether or not the
device can be suspended. This is not guaranteed to succeed though and
even if it is successful, the device may still not be suspended going
forward.
There are multiple valid reasons why pm_runtime_put() may not decide to
queue up the work item mentioned above, including, but not limited to,
the case when user space has written "on" to the device's runtime PM
"control" file in sysfs. In all of those cases, pm_runtime_put()
returns a negative error code (even though the device's runtime PM
usage counter has been successfully decremented by it) which is very
confusing. In fact, its return value should only be used for debug
purposes and care should be taken when doing it even in that case.
Accordingly, to avoid the confusion mentioned above, change the return
type of pm_runtime_put() to void.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Link: https://patch.msgid.link/14387202.RDIVbhacDa@rafael.j.wysocki
Passing pm_runtime_put() return value to the callers is not particularly
useful.
Returning an error code from pm_runtime_put() merely means that it has
not queued up a work item to check whether or not the device can be
suspended and there are many perfectly valid situations in which that
can happen, like after writing "on" to the devices' runtime PM "control"
attribute in sysfs for one example.
Accordingly, update imx_pgc_domain_suspend() to simply discard the
return value of pm_runtime_put() and always return success to the
caller.
This will facilitate a planned change of the pm_runtime_put() return
type to void in the future.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://patch.msgid.link/15658107.tv2OnDr8pf@rafael.j.wysocki
Move claimed and retune control flags out of the bitfield word to
avoid unrelated RMW side effects in asynchronous contexts.
The host->claimed bit shared a word with retune flags. Writes to claimed
in __mmc_claim_host() or retune_now in mmc_mq_queue_rq() can overwrite
other bits when concurrent updates happen in other contexts, triggering
spurious WARN_ON(!host->claimed). Convert claimed, can_retune,
retune_now and retune_paused to bool to remove shared-word coupling.
Fixes: 6c0cedd1ef ("mmc: core: Introduce host claiming by context")
Fixes: 1e8e55b670 ("mmc: block: Add CQE support")
Cc: stable@vger.kernel.org
Suggested-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Penghe Geng <pgeng@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
For some exotic peripherals the type detect can return a reserved value
of 0x4. This will currently return an error and not report anything to
user-space, update this to report the insert normally.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://patch.msgid.link/20260223093616.3800350-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
link_id is taken from the ML Reconfiguration element (control & 0x000f),
so it can be 0..15. link_removal_timeout[] has IEEE80211_MLD_MAX_NUM_LINKS
(15) elements, so index 15 is out-of-bounds. Skip subelements with
link_id >= IEEE80211_MLD_MAX_NUM_LINKS to avoid a stack out-of-bounds
write.
Fixes: 8eb8dd2ffb ("wifi: mac80211: Support link removal using Reconfiguration ML element")
Reported-by: Ariel Silver <arielsilver77@gmail.com>
Signed-off-by: Ariel Silver <arielsilver77@gmail.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260220101129.1202657-1-Ariel.Silver@cybereason.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The restore path for SDIO_CFG_CORE_V1 was incorrectly using
SDIO_CFG_SD_PIN_SEL (offset 0x44) instead of SDIO_CFG_V1_SD_PIN_SEL
(offset 0x54), causing the wrong register to be written on resume.
The save path already uses the correct V1-specific offset. This
affects BCM7445 and BCM72116 platforms which use the V1 config core.
Fixes: b7e614802e ("mmc: sdhci-brcmstb: save and restore registers during PM")
Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com>
Cc: stable@vger.kernel.org
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
RK3576 is the first platform to introduce internal phase support, and
subsequent platforms are expected to adopt a similar design. In this
architecture, runtime suspend powers off the attached power domain, which
resets registers, including vendor-specific ones such as SDMMC_TIMING_CON0,
SDMMC_TIMING_CON1, and SDMMC_MISC_CON. These registers must be saved and
restored, a requirement that falls outside the scope of the dw_mmc core.
Fixes: 59903441f5 ("mmc: dw_mmc-rockchip: Add internal phase support")
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Tested-by: Marco Schirrmeister <mschirrmeister@gmail.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When calling of_parse_phandle_with_args(), the caller is responsible
to call of_node_put() to release the reference of device node.
In of_get_dml_pipe_index(), it does not release the reference.
Fixes: 9cb15142d0 ("mmc: mmci: Add qcom dml support to the driver.")
Signed-off-by: Felix Gu <gu_0233@qq.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Commit 86ef402d80 ("gpiolib: sanitize the return value of
gpio_chip::get()") started checking the return value of the .get()
callback in struct gpio_chip. Now - almost a year later - it turns out
that there are quite a few drivers in tree that can break with this
change. Partially revert it: normalize the return value in GPIO core but
also emit a warning.
Cc: stable@vger.kernel.org
Fixes: 86ef402d80 ("gpiolib: sanitize the return value of gpio_chip::get()")
Reported-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Closes: https://lore.kernel.org/all/aZSkqGTqMp_57qC7@google.com/
Reviewed-by: Linus Walleij <linusw@kernel.org>
Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/20260219-gpiolib-set-normalize-v2-1-f84630e45796@oss.qualcomm.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
PORT_ALPM_CTL is supposed to be written only before link training. Remove
writing it from ALPM disable.
Also clearing ALPM_CTL_ALPM_AUX_LESS_ENABLE and is not about disabling ALPM
but switching to AUX-Wake ALPM. Stop touching this bit on ALPM disable.
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/7153
Fixes: 1ccbf13586 ("drm/i915/psr: Enable ALPM on source side for eDP Panel replay")
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: <stable@vger.kernel.org> # v6.10+
Signed-off-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Michał Grzelak <michal.grzelak@intel.com>
Link: https://patch.msgid.link/20260212062731.397801-1-jouni.hogander@intel.com
(cherry picked from commit 008304c9ae)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Syzkaller reported a refcount_t: addition on 0; use-after-free warning
in perf_mmap.
The issue is caused by a race condition between a failing mmap() setup
and a concurrent mmap() on a dependent event (e.g., using output
redirection).
In perf_mmap(), the ring_buffer (rb) is allocated and assigned to
event->rb with the mmap_mutex held. The mutex is then released to
perform map_range().
If map_range() fails, perf_mmap_close() is called to clean up.
However, since the mutex was dropped, another thread attaching to
this event (via inherited events or output redirection) can acquire
the mutex, observe the valid event->rb pointer, and attempt to
increment its reference count. If the cleanup path has already
dropped the reference count to zero, this results in a
use-after-free or refcount saturation warning.
Fix this by extending the scope of mmap_mutex to cover the
map_range() call. This ensures that the ring buffer initialization
and mapping (or cleanup on failure) happens atomically effectively,
preventing other threads from accessing a half-initialized or
dying ring buffer.
Closes: https://lore.kernel.org/oe-kbuild-all/202602020208.m7KIjdzW-lkp@intel.com/
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Haocheng Yu <yuhaocheng035@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260202162057.7237-1-yuhaocheng035@gmail.com
IMC on SPR and EMR does not support sub-channels. In contrast, CPUs
that use gnr_uncores[] (e.g. Granite Rapids and Sierra Forest)
implement two command schedulers (SCH0/SCH1) per memory channel,
providing logically independent command and data paths.
Do not reuse the spr_uncore_imc[] configuration for these CPUs.
Instead, introduce a dedicated gnr_uncore_imc[] with per-scheduler
events, so userspace can monitor SCH0 and SCH1 independently.
On these CPUs, replace cas_count_{read,write} with
cas_count_{read,write}_sch{0,1}. This may break existing userspace
that relies on cas_count_{read,write}, prompting it to switch to the
per-scheduler events, as the legacy event reports only partial
traffic (SCH0).
Fixes: 632c4bf6d0 ("perf/x86/intel/uncore: Support Granite Rapids")
Fixes: cb4a6ccf35 ("perf/x86/intel/uncore: Support Sierra Forest and Grand Ridge")
Reported-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Zide Chen <zide.chen@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20260210005225.20311-1-zide.chen@intel.com
Lockdep found a bug in the event scheduling when a pinned event was
failed and wakes up the threads in the ring buffer like below.
It seems it should not grab a wait-queue lock under perf-context lock.
Let's do it with irq_work.
[ 39.913691] =============================
[ 39.914157] [ BUG: Invalid wait context ]
[ 39.914623] 6.15.0-next-20250530-next-2025053 #1 Not tainted
[ 39.915271] -----------------------------
[ 39.915731] repro/837 is trying to lock:
[ 39.916191] ffff88801acfabd8 (&event->waitq){....}-{3:3}, at: __wake_up+0x26/0x60
[ 39.917182] other info that might help us debug this:
[ 39.917761] context-{5:5}
[ 39.918079] 4 locks held by repro/837:
[ 39.918530] #0: ffffffff8725cd00 (rcu_read_lock){....}-{1:3}, at: __perf_event_task_sched_in+0xd1/0xbc0
[ 39.919612] #1: ffff88806ca3c6f8 (&cpuctx_lock){....}-{2:2}, at: __perf_event_task_sched_in+0x1a7/0xbc0
[ 39.920748] #2: ffff88800d91fc18 (&ctx->lock){....}-{2:2}, at: __perf_event_task_sched_in+0x1f9/0xbc0
[ 39.921819] #3: ffffffff8725cd00 (rcu_read_lock){....}-{1:3}, at: perf_event_wakeup+0x6c/0x470
Fixes: f4b07fd62d ("perf/core: Use POLLHUP for a pinned event in error")
Closes: https://lore.kernel.org/lkml/aD2w50VDvGIH95Pf@ly-workstation
Reported-by: "Lai, Yi" <yi1.lai@linux.intel.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: "Lai, Yi" <yi1.lai@linux.intel.com>
Link: https://patch.msgid.link/20250603045105.1731451-1-namhyung@kernel.org
Before rseq became extensible, its original size was 32 bytes even
though the active rseq area was only 20 bytes. This had the following
impact in terms of userspace ecosystem evolution:
* The GNU libc between 2.35 and 2.39 expose a __rseq_size symbol set
to 32, even though the size of the active rseq area is really 20.
* The GNU libc 2.40 changes this __rseq_size to 20, thus making it
express the active rseq area.
* Starting from glibc 2.41, __rseq_size corresponds to the
AT_RSEQ_FEATURE_SIZE from getauxval(3).
This means that users of __rseq_size can always expect it to
correspond to the active rseq area, except for the value 32, for
which the active rseq area is 20 bytes.
Exposing a 32 bytes feature size would make life needlessly painful
for userspace. Therefore, add a reserved field at the end of the
rseq area to bump the feature size to 33 bytes. This reserved field
is expected to be replaced with whatever field will come next,
expecting that this field will be larger than 1 byte.
The effect of this change is to increase the size from 32 to 64 bytes
before we actually have fields using that memory.
Clarify the allocation size and alignment requirements in the struct
rseq uapi comment.
Change the value returned by getauxval(AT_RSEQ_ALIGN) to return the
value of the active rseq area size rounded up to next power of 2, which
guarantees that the rseq structure will always be aligned on the nearest
power of two large enough to contain it, even as it grows. Change the
alignment check in the rseq registration accordingly.
This will minimize the amount of ABI corner-cases we need to document
and require userspace to play games with. The rule stays simple when
__rseq_size != 32:
#define rseq_field_available(field) (__rseq_size >= offsetofend(struct rseq_abi, field))
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260220200642.1317826-3-mathieu.desnoyers@efficios.com
The rseq registration validates that the rseq_size argument is greater
or equal to 32 (the original rseq size), but the comment associated with
this check does not clearly state this.
Clarify the comment to that effect.
Fixes: ee3e3ac05c ("rseq: Introduce extensible rseq ABI")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260220200642.1317826-2-mathieu.desnoyers@efficios.com
Kernel test robot reported that
tools/testing/selftests/kvm/hardware_disable_test was failing due to
commit 704069649b ("sched/core: Rework sched_class::wakeup_preempt()
and rq_modified_*()")
It turns out there were two related problems that could lead to a
missed preemption:
- when hitting newidle balance from the idle thread, it would elevate
rb->next_class from &idle_sched_class to &fair_sched_class, causing
later wakeup_preempt() calls to not hit the sched_class_above()
case, and not issue resched_curr().
Notably, this modification pattern should only lower the
next_class, and never raise it. Create two new helper functions to
wrap this.
- when doing schedule_idle(), it was possible to miss (re)setting
rq->next_class to &idle_sched_class, leading to the very same
problem.
Cc: Sean Christopherson <seanjc@google.com>
Fixes: 704069649b ("sched/core: Rework sched_class::wakeup_preempt() and rq_modified_*()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202602122157.4e861298-lkp@intel.com
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260218163329.GQ1395416@noisy.programming.kicks-ass.net
objtool warns about this function being called inside of a uaccess
section:
kernel/entry/common.o: warning: objtool: irqentry_exit+0x1dc: call to rseq_arm_slice_extension_timer() with UACCESS enabled
Interestingly, this happens with CONFIG_RSEQ_SLICE_EXTENSION disabled,
so this is an empty function, as the normal implementation is
already marked __always_inline.
I could reproduce this multiple times with gcc-11 but not with gcc-15,
so the compiler probably got better at identifying the trivial function.
Mark all the empty helpers for !RSEQ_SLICE_EXTENSION as __always_inline
for consistency, avoiding this warning.
Fixes: 0ac3b5c3dc ("rseq: Implement time slice extension enforcement timer")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260206074122.709580-1-arnd@kernel.org
Vincent reported that he was seeing undue lag clamping in a mixed
slice workload. Implement the max_slice tracking as per the todo
comment.
Fixes: 147f3efaa2 ("sched/fair: Implement an EEVDF-like scheduling policy")
Reported-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Shubhang Kaushik <shubhang@os.amperecomputing.com>
Link: https://patch.msgid.link/20250422101628.GA33555@noisy.programming.kicks-ass.net
In the EEVDF framework with Run-to-Parity protection, `se->vprot` is an
independent variable defining the virtual protection timestamp.
When `reweight_entity()` is called (e.g., via nice/renice), it performs
the following actions to preserve Lag consistency:
1. Scales `se->vlag` based on the new weight.
2. Calls `place_entity()`, which recalculates `se->vruntime` based on
the new weight and scaled lag.
However, the current implementation fails to update `se->vprot`, leading
to mismatches between the task's actual runtime and its expected duration.
Fixes: 63304558ba ("sched/eevdf: Curb wakeup-preemption")
Suggested-by: Zhang Qiao <zhangqiao22@huawei.com>
Signed-off-by: Wang Tao <wangtao554@huawei.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Shubhang Kaushik <shubhang@os.amperecomputing.com>
Link: https://patch.msgid.link/20260120123113.3518950-1-wangtao554@huawei.com
We should not (re)set slice protection in the sched_change pattern
which calls put_prev_task() / set_next_task().
Fixes: 63304558ba ("sched/eevdf: Curb wakeup-preemption")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Shubhang Kaushik <shubhang@os.amperecomputing.com>
Link: https://patch.msgid.link/20260219080624.561421378%40infradead.org
It turns out that zero_vruntime tracking is broken when there is but a single
task running. Current update paths are through __{en,de}queue_entity(), and
when there is but a single task, pick_next_task() will always return that one
task, and put_prev_set_next_task() will end up in neither function.
This can cause entity_key() to grow indefinitely large and cause overflows,
leading to much pain and suffering.
Furtermore, doing update_zero_vruntime() from __{de,en}queue_entity(), which
are called from {set_next,put_prev}_entity() has problems because:
- set_next_entity() calls __dequeue_entity() before it does cfs_rq->curr = se.
This means the avg_vruntime() will see the removal but not current, missing
the entity for accounting.
- put_prev_entity() calls __enqueue_entity() before it does cfs_rq->curr =
NULL. This means the avg_vruntime() will see the addition *and* current,
leading to double accounting.
Both cases are incorrect/inconsistent.
Noting that avg_vruntime is already called on each {en,de}queue, remove the
explicit avg_vruntime() calls (which removes an extra 64bit division for each
{en,de}queue) and have avg_vruntime() update zero_vruntime itself.
Additionally, have the tick call avg_vruntime() -- discarding the result, but
for the side-effect of updating zero_vruntime.
While there, optimize avg_vruntime() by noting that the average of one value is
rather trivial to compute.
Test case:
# taskset -c -p 1 $$
# taskset -c 2 bash -c 'while :; do :; done&'
# cat /sys/kernel/debug/sched/debug | awk '/^cpu#/ {P=0} /^cpu#2,/ {P=1} {if (P) print $0}' | grep -e zero_vruntime -e "^>"
PRE:
.zero_vruntime : 31316.407903
>R bash 487 50787.345112 E 50789.145972 2.800000 50780.298364 16 120 0.000000 0.000000 0.000000 /
.zero_vruntime : 382548.253179
>R bash 487 427275.204288 E 427276.003584 2.800000 427268.157540 23 120 0.000000 0.000000 0.000000 /
POST:
.zero_vruntime : 17259.709467
>R bash 526 17259.709467 E 17262.509467 2.800000 16915.031624 9 120 0.000000 0.000000 0.000000 /
.zero_vruntime : 18702.723356
>R bash 526 18702.723356 E 18705.523356 2.800000 18358.045513 9 120 0.000000 0.000000 0.000000 /
Fixes: 79f3f9bedd ("sched/eevdf: Fix min_vruntime vs avg_vruntime")
Reported-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: K Prateek Nayak <kprateek.nayak@amd.com>
Tested-by: Shubhang Kaushik <shubhang@os.amperecomputing.com>
Link: https://patch.msgid.link/20260219080624.438854780%40infradead.org
After converting the __ASSEMBLY__ statements to __ASSEMBLER__ in
commit 24a295e4ef ("x86/headers: Replace __ASSEMBLY__ with
__ASSEMBLER__ in non-UAPI headers"), some new code has been
added that uses __ASSEMBLY__ again. Convert these stragglers, too.
This is a mechanical patch, done with a simple "sed -i" command.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20251218182029.166993-1-thuth@redhat.com
Rustam reported his clang builds did not boot properly; turns out his
.config has: CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_64B=y set.
Fix up the FineIBT code to deal with this unusual alignment.
Fixes: 931ab63664 ("x86/ibt: Implement FineIBT")
Reported-by: Rustam Kovhaev <rkovhaev@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Rustam Kovhaev <rkovhaev@gmail.com>
The commit 5b472b6e5b ("x86_64/bug: Implement __WARN_printf()")
implemented __WARN_printf(), which changed the mechanism to use UD1
instead of UD2. However, it only handles the trap in the runtime IDT
handler, while the early booting IDT handler lacks this handling. As a
result, the usage of WARN() before the runtime IDT setup can lead to
kernel crashes. Since KMSAN is enabled after the runtime IDT setup, it
is safe to use handle_bug() directly in early_fixup_exception() to
address this issue.
Fixes: 5b472b6e5b ("x86_64/bug: Implement __WARN_printf()")
Signed-off-by: Hou Wenlong <houwenlong.hwl@antgroup.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/c4fb3645f60d3a78629d9870e8fcc8535281c24f.1768016713.git.houwenlong.hwl@antgroup.com
array_index_nospec() is no use if the result gets spilled to the stack, as
it makes the believed safe-under-speculation value subject to memory
predictions.
For all practical purposes, this means array_index_nospec() must be used in
the expression that accesses the array.
As the code currently stands, it's the wrong side of irqentry_enter(), and
'index' is put into %ebp across the function call.
Remove the index variable and reposition array_index_nospec(), so it's
calculated immediately before the array access.
Fixes: 14619d912b ("x86/fred: FRED entry/exit and dispatch code")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260106131504.679932-1-andrew.cooper3@citrix.com
Inode with identical data but different @aops cannot be mixed
because the page cache is managed by different subsystems (e.g.,
@aops for compressed on-disk inodes cannot handle plain on-disk
inodes).
In this patch, we never allow inodes to share the page cache
among plain, compressed, and fileio cases. When a shared inode
is created, we initialize @aops that is the same as the initial
real inode, and subsequent inodes cannot share the page cache
if the inferred @aops differ from the corresponding shared inode.
This is reasonable as a first step because, in typical use cases,
if an inode is compressible, it will fall into compressed
inodes across different filesystem images unless users use plain
filesystems. However, in that cases, users will use plain
filesystems all the time.
Fixes: 5ef3208e3b ("erofs: introduce the page cache share feature")
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Wakeup capable GPIOs uses PDC as parent IRQ chip and PDC on qcs615 do not
support dual edge IRQs. Add missing wakeirq_dual_edge_errata configuration
to enable workaround for dual edge GPIO IRQs.
Fixes: b698f36a9d ("pinctrl: qcom: add the tlmm driver for QCS615 platform")
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Linus Walleij <linusw@kernel.org>
Add QUIRK_FLAG_SKIP_CLOCK_SELECTOR for Focusrite devices.
During interface parsing, snd_usb_clock_find_source() reads the clock
selector value then writes it back unchanged. On Focusrite devices
this redundant write results in a ~300ms delay per altsetting, adding
~1.8s to probe time on a typical device with 6 altsettings.
Enabling SKIP_CLOCK_SELECTOR skips the redundant write-back.
Signed-off-by: Geoffrey D. Bennett <g@b4.vu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/00e53ae0a508b41516b41833daa17823381a649c.1771594828.git.g@b4.vu
