Add support for wlan-2g LED on GPIO 42 and wps buttons on GPIO 19.
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250120064508.2722341-1-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
USB phys in ipq9574 use the 'L5' regulator. The commit ec4f047679
("arm64: dts: qcom: ipq9574: Enable USB") incorrectly specified it as
'L2'. Because of this when the phy module turns off/on its regulators,
the wrong regulator is turned off/on resulting in 2 issues, namely the
correct regulator related to the USB phy is not turned off/on and the
module powered by the incorrect regulator is affected.
Fixes: ec4f047679 ("arm64: dts: qcom: ipq9574: Enable USB")
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250207073545.1768990-2-quic_varada@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the missing HID supplies to avoid relying on other consumers to keep
them on.
This also avoids the following warnings on boot:
i2c_hid_of 0-0010: supply vdd not found, using dummy regulator
i2c_hid_of 0-0010: supply vddl not found, using dummy regulator
i2c_hid_of 1-0015: supply vdd not found, using dummy regulator
i2c_hid_of 1-002c: supply vdd not found, using dummy regulator
i2c_hid_of 1-0015: supply vddl not found, using dummy regulator
i2c_hid_of 1-002c: supply vddl not found, using dummy regulator
i2c_hid_of 1-003a: supply vdd not found, using dummy regulator
i2c_hid_of 1-003a: supply vddl not found, using dummy regulator
Note that VCC3B is also used for things like the modem which are not yet
described so mark the regulator as always-on for now.
Fixes: 7d1cbe2f49 ("arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6")
Cc: stable@vger.kernel.org # 6.12
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250314145440.11371-9-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The l12b and l15b supplies are used by components that are not (fully)
described (and some never will be) and must never be disabled.
Mark the regulators as always-on to prevent them from being disabled,
for example, when consumers probe defer or suspend.
Fixes: af16b00578 ("arm64: dts: qcom: Add base X1E80100 dtsi and the QCP dts")
Cc: stable@vger.kernel.org # 6.8
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250314145440.11371-8-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The l12b and l15b supplies are used by components that are not (fully)
described (and some never will be) and must never be disabled.
Mark the regulators as always-on to prevent them from being disabled,
for example, when consumers probe defer or suspend.
Fixes: 45247fe17d ("arm64: dts: qcom: x1e80100: add Lenovo Thinkpad Yoga slim 7x devicetree")
Cc: stable@vger.kernel.org # 6.11
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250314145440.11371-7-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The l12b and l15b supplies are used by components that are not (fully)
described (and some never will be) and must never be disabled.
Mark the regulators as always-on to prevent them from being disabled,
for example, when consumers probe defer or suspend.
Fixes: 6f18b8d414 ("arm64: dts: qcom: x1e80100-hp-x14: dt for HP Omnibook X Laptop 14")
Cc: stable@vger.kernel.org # 6.14
Cc: Jens Glathe <jens.glathe@oldschoolsolutions.biz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250314145440.11371-6-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The l12b and l15b supplies are used by components that are not (fully)
described (and some never will be) and must never be disabled.
Mark the regulators as always-on to prevent them from being disabled,
for example, when consumers probe defer or suspend.
Note that these supplies currently have no consumers described in
mainline.
Fixes: f5b788d0e8 ("arm64: dts: qcom: Add support for X1-based Dell XPS 13 9345")
Cc: stable@vger.kernel.org # 6.13
Reviewed-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Tested-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250314145440.11371-5-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The l12b and l15b supplies are used by components that are not (fully)
described (and some never will be) and must never be disabled.
Mark the regulators as always-on to prevent them from being disabled,
for example, when consumers probe defer or suspend.
Fixes: 7b8a31e82b ("arm64: dts: qcom: Add X1E001DE Snapdragon Devkit for Windows")
Cc: stable@vger.kernel.org # 6.14
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250314145440.11371-4-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The l12b and l15b supplies are used by components that are not (fully)
described (and some never will be) and must never be disabled.
Mark the regulators as always-on to prevent them from being disabled,
for example, when consumers probe defer or suspend.
Fixes: 7d1cbe2f49 ("arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6")
Cc: stable@vger.kernel.org # 6.12
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250314145440.11371-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The l12b and l15b supplies are used by components that are not (fully)
described (and some never will be) and must never be disabled.
Mark the regulators as always-on to prevent them from being disabled,
for example, when consumers probe defer or suspend.
Fixes: bd50b1f5b6 ("arm64: dts: qcom: x1e80100: Add Compute Reference Device")
Cc: stable@vger.kernel.org # 6.8
Cc: Abel Vesa <abel.vesa@linaro.org>
Cc: Rajendra Nayak <quic_rjendra@quicinc.com>
Cc: Sibi Sankar <quic_sibis@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250314145440.11371-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the keypad volume-up key on the debug extension board.
This is useful to have when testing PMIC interrupt handling, and the key
can also be used to wake up from deep suspend states (CX shutdown).
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250307171036.7276-1-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The WCD938x codec provides two controls for each of the MIC_BIASn outputs:
- "MIC BIASn" enables an internal regulator to generate the output
with a configurable voltage (qcom,micbiasN-microvolt).
- "VA MIC BIASn" enables "pull-up mode" that bypasses the internal
regulator and directly outputs fixed 1.8V from the VDD_PX pin.
This is intended for low-power VA (voice activation) use cases.
The audio-routing setup for the X1E80100 CRD currently specifies both
as power supplies for the DMICs, but only one of them can be active
at the same time. In practice, only the internal regulator is used
with the current setup because the driver prefers it over pull-up mode.
Make this more clear by dropping the redundant routes to the pull-up
"VA MIC BIASn" supply. There is no functional difference except that we
skip briefly switching to pull-up mode when shutting down the microphone.
Fixes: 4442a67eed ("arm64: dts: qcom: x1e80100-crd: add sound card")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20241203-x1e80100-va-mic-bias-v1-2-0dfd4d9b492c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The WCD938x codec provides two controls for each of the MIC_BIASn outputs:
- "MIC BIASn" enables an internal regulator to generate the output
with a configurable voltage (qcom,micbiasN-microvolt).
- "VA MIC BIASn" enables "pull-up mode" that bypasses the internal
regulator and directly outputs fixed 1.8V from the VDD_PX pin.
This is intended for low-power VA (voice activation) use cases.
The audio-routing setup for the ThinkPad X13s currently specifies both
as power supplies for the DMICs, but only one of them can be active
at the same time. In practice, only the internal regulator is used
with the current setup because the driver prefers it over pull-up mode.
Make this more clear by dropping the redundant routes to the pull-up
"VA MIC BIASn" supply. There is no functional difference except that we
skip briefly switching to pull-up mode when shutting down the microphone.
Fixes: 2e498f35c3 ("arm64: dts: qcom: sc8280xp-x13s: fix va dmic dai links and routing")
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Link: https://lore.kernel.org/r/20241203-x1e80100-va-mic-bias-v1-1-0dfd4d9b492c@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Since the Lenovo Thinkpad T14s Gen6 is available with an OLED, add
dedicated a dedicated dts for it.
This is needed because the backlight is handled differently for OLED
panels when compared to LCD ones.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250314140325.4143779-4-abel.vesa@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Due to the fact that Lenovo Thinkpad T14s Gen6 is available with both
OLED and LCD, the backlight control differs HW-wise. For the LCD variant,
the panel's backlight is controlled via one of the PWMs provided by the
PMK8550 PMIC. For the OLED variant, the backlight is internal to the
panel and therefore it is not described in devicetree.
For this reason, create a generic dtsi for the T14s by renaming the
existing dts. While at it, add a node name to panel and drop the enable
gpio and pinctrl properties from the panel node. Then add the LCD variant
dts file with the old name and describe all backlight related nodes.
So the existing dts will now be used for LCD variant while for OLED new
dts will be added.
Tested-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250314140325.4143779-3-abel.vesa@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Due to the difference in how the panel backlight is being handled
between the OLED variant and LCD one, it is required to have two
separate DTBs.
So document the compatible string for both the OLED and LCD variants.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
Link: https://lore.kernel.org/r/20250314140325.4143779-2-abel.vesa@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a node for the GT9897 touchscreen found on this smartphone connected
via SPI.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20250312-fp5-touchscreen-v2-1-4bed270e0065@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Correct the clocks property for the uart14 node to fix UART functionality
on QUP2_SE6. The current failure is due to an incorrect clocks assignment.
Change the clocks property to GCC_QUPV3_WRAP2_S6_CLK to resolve the issue.
Signed-off-by: Jyothi Kumar Seerapu <quic_jseerapu@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Fixes: 068c3d3c83 ("arm64: dts: qcom: Add base SM8750 dtsi")
Link: https://lore.kernel.org/r/20250312104358.2558-1-quic_jseerapu@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
In IPQ5424, the bootloader collects the system RAM contents upon a crash
for post-morterm analysis. If we don't reserve the memory region used by
the bootloader, linux will consume it. Upon the next boot after a crash,
the bootloader will be loaded in the same region, which could lead to the
loss of some data. sometimes, we may miss out critical information.
Therefore, let's reserve the region used by the bootloader.
Signed-off-by: Manikanta Mylavarapu <quic_mmanikan@quicinc.com>
Reviewed-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250312094948.3376126-1-quic_mmanikan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable secondary USB controller on QCS8300 Ride platform. Since it is a
Type-A port, the dr_mode has been set to "host". The VBUS to connected
peripherals is provided by TPS2559QWDRCTQ1 regulator connected to the
port. The regulator has an enable pin controlled by PMM8650. Model it as
fixed regulator and keep it Always-On at boot, since the regulator is
GPIO controlled regulator.
Co-developed-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Signed-off-by: Krishna Kurapati <krishna.kurapati@oss.qualcomm.com>
Signed-off-by: Manish Nagar <quic_mnagar@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250310104743.976265-1-quic_mnagar@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There is a typo in cpu7_opp9. Fix it to get rid of the following
errors.
[ 0.198043] cpu cpu7: Voltage update failed freq=1747200
[ 0.198052] cpu cpu7: failed to update OPP for freq=1747200
Fixes: 8e0e8016cb ("arm64: dts: qcom: sm8250: Add CPU opp tables")
Signed-off-by: Xilin Wu <wuxilin123@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250308-fix-sm8250-cpufreq-v1-1-8a0226721399@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add a gpio-keys label for the lid-switch for consistency and to separate
it from the volume-up key (e.g. in /proc/interrupts).
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250307171222.7470-3-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the keypad volume-up key on the debug extension board.
This is useful to have when testing PMIC interrupt handling, and the key
can also be used to wake up from deep suspend states (CX shutdown).
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20250307171222.7470-2-johan+linaro@kernel.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The preemptively-merged node contains a property absent from the final
bindings. Remove it.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Fixes: b16ee3d0cd ("arm64: dts: qcom: x1e80100-romulus: Set up PS8830s")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250306-topic-dt_bindings_fixups-v1-10-0c84aceb0ef9@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The node is currently named power-controller, which requires the device
underneath is a power domain provider. Rename it to align with other
SoCs and resolve this sort of warnings:
power-controller@c310000: '#power-domain-cells' is a required property
Fixes: 8575f197b0 ("arm64: dts: qcom: Introduce the SC8180x platform")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250306-topic-dt_bindings_fixups-v1-8-0c84aceb0ef9@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The node is currently named power-controller, which requires the device
underneath is a power domain provider. Rename it to align with other
SoCs and resolve this sort of warnings:
power-controller@c300000: '#power-domain-cells' is a required property
Fixes: 0775021783 ("arm64: dts: qcom: qcs615: add AOSS_QMP node")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250306-topic-dt_bindings_fixups-v1-7-0c84aceb0ef9@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The node is currently named power-controller, which requires the device
underneath is a power domain provider. Rename it to align with other
SoCs and resolve this sort of warnings:
power-controller@c310000: '#power-domain-cells' is a required property
Fixes: 91f767eb69 ("arm64: dts: qcom: sdx75: Add AOSS node")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20250306-topic-dt_bindings_fixups-v1-6-0c84aceb0ef9@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Commit 53c6d854be ("dt-bindings: usb: dwc3: Clean up hs_phy_irq in binding")
reworked the dt-bindings to accurately represent the hardware.
Execute the second half of the cleanup by wiring up the missing
pwr_event IRQ and adjusting the entry order.
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250306-topic-dt_bindings_fixups-v1-5-0c84aceb0ef9@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add support for the Xiaomi Redmi Note 8 based on the SM6125 SoC.
Defined features:
- dmesg output to bootloader preconfigured display
- USB
- eMMC
- SD card
- SMD RPM regulators
- Volume Up, Down and Power buttons
Signed-off-by: Gabriel Gonzales <semfault@disroot.org>
Link: https://lore.kernel.org/r/20250311003353.8250-3-semfault@disroot.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document the Xiaomi Redmi Note 8 (codenamed ginkgo),
which is based off the SM6125 SoC.
Signed-off-by: Gabriel Gonzales <semfault@disroot.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250311003353.8250-2-semfault@disroot.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Decoder and encoder nodes are already deprecated from bindings. Update
the venus node to align with bindings. The nodes were deprecated with
commit 459997e899 ("media: dt-bindings: qcom-venus: Deprecate
video-decoder and video-encoder where applicable") and is part of
v6.14-rc1 and onwards.
Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20250303-b4-media-v2-1-893651a4b1c7@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add CTCU and ETR nodes in DT to enable related functionalities.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Jie Gan <quic_jiegan@quicinc.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20250303032931.2500935-11-quic_jiegan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Audio DSP supports compressed playback on this SoC. It is required
to add compressed DAI and separate MultimeMedia DAI link to enable this.
Fcplay or cplay tools from tinycompress can playback, say, mp3 files:
fcplay -c 0 -d 3 test.mp3
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Alexey Klimov <alexey.klimov@linaro.org>
Link: https://lore.kernel.org/r/20250228162308.388818-1-alexey.klimov@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The PMUs shares the same per-cpu (PPI) interrupt, so declare the proper
interrupt partition maps and use the 4th interrupt cell to pass the
partition phandle for each ARM PMU node.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250228-topic-sm8650-pmu-ppi-partition-v4-2-78cffd35c73d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The ARM PMUs shares the same per-cpu (PPI) interrupt, so we need to switch
to interrupt-cells = <4> in the GIC node to allow adding an interrupt
partition map phandle as the 4th cell value for GIC_PPI interrupts.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250228-topic-sm8650-pmu-ppi-partition-v4-1-78cffd35c73d@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The qcs615 SoC has a True Random Number Generator, add the node
with the correct compatible set.
Signed-off-by: Abhinaba Rakshit <quic_arakshit@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250228-enable-trng-for-qcs615-v2-2-017aa858576e@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
SM8750 have two different clusters. cluster0 have CPU 0-5 as child and
cluster1 have CPU 6-7 as child. Each cluster requires its own idle state
and power domain in order to achieve complete domain sleep state.
However only single cluster idle state is added mapping CPU 0-7 to the
same power domain. Fix this by correctly mapping each CPU to respective
cluster power domain and make cluster1 power domain use same domain idle
state as cluster0 since both use same idle state parameters.
Fixes: 068c3d3c83 ("arm64: dts: qcom: Add base SM8750 dtsi")
Signed-off-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20250226-sm8750_cluster_idle-v2-1-ef0ac81e242f@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
