The register 0x000 is now really boot control, and some
of the old bit names were (even for old hardware) not
reflecting the names on the hardware side; rename them
in the driver to align the naming.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241228223206.6f25be160619.I3ffc9601e99dc414a9ae54a0d90c9d20c0253da5@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since iwl_fw_error_collect() is now always called with the sync
argument set to true, to collect data synchronously, remove the
argument from it entirely.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.08f515513e88.I780a557743ca7f029f46a1cc75d0799542e39d83@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to later add the ability to do deeper resets of the
device when it crashes, first restructure the firmware error
handling. Instead of having just a single nic_error() method
that handles all, split it:
- nic_error() just handles and prints the error itself,
- dump_error() synchronously creates an error dump, and
- sw_reset() will be called to request doing a SW reset.
This changes the architecture so that the transport is now
responsible for deciding how to do the reset, and therefore
the handling of reprobe if error occurs during reconfig
moves there, which necessitates adding a method there that
notifies the transport that the recovery was completed.
Actually introducing the model under which deeper resets can
be done will be in future patches.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.6d4f741ae907.I96a9243e7877808ed6d1bff6967c15d6c24882f0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When some channel context manipulations fail, the device
is going to be restarted to try to recover. Make this go
through a real FW restart via an NMI so the transport is
aware of it and can later handle escalation, and to make
it easier to restructure the code later.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.96b732029d20.I2e729f402db58a76cea620b6f62a02da49a10b48@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Except for some special handling in DVM, error dump and some
message behaviour, cmd_queue_full and nic_error are equivalent
now. Unify by giving a special error type, so DVM can continue
to differentiate.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.0222183504aa.Ie29cef75fbd91b64a43619bc36bd5b29c5b9f957@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Approximately three years ago, in commit ddb6b76b6f
("iwlwifi: yoyo: support TLV-based firmware reset"), the code
was (likely erroneously) changed to no longer treat error
interrupts as firmware errors. As a result, this meant that
the fw_restart counter was only applied in case of command
queue being stuck, which never seems to happen. Also, there's
no longer any way to set the mvm->fw_restart to a value that
doesn't match exactly the module parameter behaviour.
Instead of trying to fix this, simply remove the logic that
limits the number of restarts, it's clearly unused.
However, restore the logic that restart isn't unconditional,
by checking the module parameter.
Since the "fw_error" argument to iwl_mvm_nic_restart() is now
always true (except in the "never happens" case of CMD queue
stuck), just remove it too and treat command queue stuck the
same way as everything else.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.b0489daf323c.I0cd3233b2214c5f06e059f746041b19d08647e40@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Now that the retry loop only happens when timeouts occur
and firmware errors are different, we no longer need the
STARTING state with all the infrastructure for it.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.c55d73436521.I08e9f6a71d56f86872bca4d4e3048faa113a7120@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We had reverted the retry loop removal because of an issue
with PNVM loading, but that issue manifests as timeouts.
Since the retries aren't needed in other cases, only do
them when there were timeouts while starting, not other
errors.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.98201c79f66d.I5d7e12b219d533c6a77741ec5863984d35711f48@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We had reverted the retry loop removal because of an issue
with PNVM loading, but that issue manifests as timeouts.
Since the retry loops aren't needed in other cases, only
do them when there were timeouts while loading, not other
errors.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.a21bf40b0fd3.I70166e460906d6d183359889d7543b9c587b7182@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In order to restrict the retry loops for timeouts, first
pass the error code up using ERR_PTR(). This of course
requires all existing functions to be updated accordingly.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.3fe5031d5784.I7307996c91dac69619ff9c616b8a077423fac19f@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
These comments have kernel-doc markup and were meant to
be handled as such, add the right /** marker to them.
Add missing entries where needed.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.c5c04b641479.I702b8122d307a0d9d09df038cda10be063f7f2d7@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
For certain platforms, it may necessary to use the STEP in URM
(ultra reliable mode.) Read the necessary flags from the BIOS
(ACPI or UEFI) and indicate the chosen mode to the firmware in
the context info. Whether or not URM really was configured is
already read back later, to adjust capabilities accordingly.
Signed-off-by: Somashekhar(Som) <somashekhar.puttagangaiah@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.b30024905de3.If3c578af2c15f8005bbe71499bc4091348ed7bb0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This variable exists for the "common" (WiFi/BT) GUID, not the
WiFi-only GUID. Fix that by passing the GUID to the function.
A short-cut for the wifi-only version remains so not all code
must be updated.
However, rename the GUID defines to be clearer.
Fixes: 09b4c35d73 ("wifi: iwlwifi: mvm: Support STEP equalizer settings from BIOS.")
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Daniel Gabay <daniel.gabay@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.89a5ad921b6d.Idae95a70ff69d2ba1b610e8eced826961ce7de98@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This is becoming the link_id. Since this makes no difference on non-MLD
devices, just rename to link_id for all the APIs that use the common
structure.
Starting from command 9, feed the link_id to the firmware instead of the
mac id.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.f1155e713201.I753900d10e82f339cf9679ed403027d38dc1fd58@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The statistics are not synchronized with the time that we enter EMLSR.
This means that we can receive the statistic notification just after
having cleared the counters, causing us to immediately exit EMLSR again.
Fix this by checking that most of the time for the window has passed. If
that is not the case, ignore this window and wait for the next
notification.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.0eb0f2044535.Ic2af92737ccfc873f3b6c228704238ebb9f983ca@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Due to the firmware allocating the BAID, we can only install
the data structure after the BAID is valid from the firmware's
point of view. As a result, the firmware can start sending
frame release notifications to the driver immediately. This
isn't supposed to happen by protocol, since the peer STA is
not expected to use the blockack session until the AddBA has
a response. However, firmware doesn't know that, our RX path
can't know when it was, so simply don't WARN in this case but
only have a debug message.
Since the BAID comes from firmware, also use IWL_FW_CHECK()
instead of a warning for the validity check.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.4360f2b9e185.I447f9a5fc6dfdc78ec238200338e2da040ee7e61@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Instead of differentiating only sync/async, differentiate
the type of error, and document that only reset handshake
timeout (IWL_ERR_TYPE_RESET_HS_TIMEOUT) needs sync handling.
The special sync handling is somewhat temporary, the idea
is to later split the nic_error() method into error dump,
synchronizing the dump, and SW reset methods, and the type
is mostly in order to unify command queue full handling
into that new architecture as well.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241227095718.aed9c9e4fac0.I2288042bec4728a75b61cb7f6ded5214bfa3ce85@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The last use of ieee80211_smps_is_restrictive() was removed in 2020 by
commit 52b4810bed ("mac80211: Remove support for changing AP SMPS mode")
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20241226170119.108947-1-linux@treblig.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
extend TAS table support to revision 2 for getting UHB canada
enablement from BIOS and send to firmware via TAS_CONFIG cmd
based on firmware capability. While on it fixed kernel-doc for
struct iwl_tas_config_cmd_v4.
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241226174257.0b1d92ad59b8.Ib80f8514a64fc2800a2a20131e730c2bd9c4c4af@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Use IWL_FW_CHECK() for BAR notification size validation, improving
diagnostics with a clear error message on failure.
Signed-off-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241226174257.913d5d476929.I8cd62f45bacc088c309b0152fc392dc2579e82e0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit 6b3e87cc0c ("iwlwifi: Add support for LARI_CONFIG_CHANGE_CMD
cmd v9")
added a few bits to iwl_lari_config_change_cmd::oem_unii4_allow_bitmap
if the FW has LARI version >= 9.
But we also need to send those bits for version 8 if the FW is capable
of this feature (indicated with capability bits)
Add the FW capability bit, and set the additional bits in the cmd when
the version is 8 and the FW capability bit is set.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241226174257.dc5836f84514.I1e38f94465a36731034c94b9811de10cb6ee5921@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit ef7ddf4e2f ("iwlwifi: Add support for LARI_CONFIG_CHANGE_CMD v12")
added a few bits to iwl_lari_config_change_cmd::chan_state_active_bitmap
if the FW has LARI version >= 12.
But we also need to send those bits for version 8-11 if the FW is capable
of this feature (indicated with capability bits)
Add the FW capability bit, and set the additional bits in the cmd when
the version is 8 and the FW capability bit is set.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241226174257.672651ad849c.I67a00d9544c48ad964f8e998ebe8c168071c3d01@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We only logged an error in the fast resume path. However, as the
hardware is being restarted it makes sense to log an error to make it
easier to understand what is happening.
Add a new error message into the normal resume path and update the
error in the fast resume path to match.
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241226174257.df1e451d4928.Ibe286bc010ad7fecebba5650097e16ed22a654e4@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Enhance the documentation for the enum iwl_nvm_channel_flags to
provide better clarity for NVM_CHANNEL_IBSS and NVM_CHANNEL_ACTIVE flags
Signed-off-by: Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241226174257.d4018e62b2bd.Ie20fe3408bcc358078e3e5bf38edeb6b951c9a40@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently driver requests periodic statistics after entering EMLSR.
This means that when not in EMLSR, link selection decisions will be
done based on old statistics, from the association time.
Request periodic statistics already at association instead,
Signed-off-by: Somashekhar(Som) <somashekhar.puttagangaiah@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241226174257.4ca59fe0e060.Ic46280aad4dc7087a7d6d0773b86c255133cb7d6@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
According to Draft P802.11be_D7.0 clause 35.3.4.2, if a multi-link
request requests an MLD with which an AP corresponding to the
nontransmitted BSSID, the corresponding multi-link probe response
shall carry a basic multi-mink element of that MLD in the frame body
of the multi-link probe response, whose location is outside of the
Multiple BSSID element carried in the frame.
Therefore additional handing is needed for parsing multi-link probe
response and generating the merged elements so that the MLD in the frame
body can be correctly copied to the generated elements. Otherwise, the
nontransmitted BSS looks like non-MLD.
Signed-off-by: Money Wang <money.wang@mediatek.com>
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Link: https://patch.msgid.link/20241225073725.847062-1-michael-cy.lee@mediatek.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Now it neither sets the ret argument or return something else than
false.
Cleanup this function to be void and to not receive the ret argument.
This also allows to get rid of the sta_in_fw parameter in
iwl_mvm_mld_free_sta_link.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241224192322.ecebfa16c62c.Ia1cc352b871593be4f51cb3db98f9eedd5267857@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Currently, the sequence goes like this (among others):
1. flush all stations (including the AP ones) -> this will tell the
drivers to remove the stations
2. notify the driver the vif is not associated.
Which means that in between 1 and 2, the state is that the vif is
associated, but there is no AP station, which makes no sense, and may be
problematic for some drivers (for example iwlwifi)
Change the sequence to:
1. flush the TDLS stations
2. move the AP station to IEEE80211_STA_NONE
3. notify the driver about the vif being unassociated
4. flush the AP station
In order to not break other drivers, add a vif flag to indicate whether
the driver wants to new sequence or not. If the flag is not set, then
things will be done in the old sequence.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241224192322.996ad1be6cb3.I7815d33415aa1d65c0120b54be7a15a45388f807@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Sometimes we might want to flush only part of the stations of a vif,
for example only the TDLS ones.
To allow this, add a do_not_flush_sta argument to __sta_info_flush,
which in turn, will not flush this station.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20241224192322.535e1fcca192.Icecf7f443bf98c9535ce8ec03b24d0d17dfbc28e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
in iwl_mvm_sta_del we call iwl_mvm_sec_key_remove_ap with link id 0,
when it might actually be something else, causing us to skip all
the keys.
Since the call to iwl_mvm_sec_key_remove_ap was mostly skipped (because
for STA mode we are not removing the ap sta immediately, but later when
the vif is set to unassocicated),
this was fine.
The other call to iwl_mvm_sec_key_remove_ap, when we actually do remove the
ap sta, was called with the right link id. So the bug didn't happen so far.
Now that mac80211 is going to change such that we can immediately
remove the ap sta, the call to iwl_mvm_sec_key_remove_ap with link id 0
will not be skipped, so no key will be removed, and then when
mac80211 eventually tells us to remove that keys, we no longer have the
sta ids for them.
Simply pass the right link id to iwl_mvm_sec_key_remove_ap.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20241224192322.db7a5f551492.I79fe16a14fa0bb20751ba2526c3195fef39ef772@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This code is only relevant for older devices, that are not supporting
mld, so shouldn't be in iwl_mvm_sta_del, which is common to both pre-mld
and mld.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20241224192322.a665d16a3857.I840b00a7b38f3967ec5e75ff6a85e756f4d82437@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The inverse value is stored in the table, make the documentation match the code.
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Acked-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/2008554.usQuhbGJ8B@devpool47.emlix.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The last use of ieee80211_debugfs_key_sta_del() was removed in 2007 by
commit 11a843b7e1 ("[MAC80211]: rework key handling")
The last use of ieee80211_debugfs_key_add_mgmt_default() was removed
in 2010 by
commit f7e0104c1a ("mac80211: support separate default keys")
The last use of ieee80211_debugfs_key_add_beacon_default() was
removed in 2020 by
commit e5473e80d4 ("mac80211: Support BIGTK configuration for Beacon
protection")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://patch.msgid.link/20241224013257.185742-2-linux@treblig.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Running 'scripts/kernel-doc -Wall -Werror -none' flagged the following
kernel-doc issues:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:823: warning: No description found for return value of 'brcmf_apsta_add_vif'
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:907: warning: No description found for return value of 'brcmf_mon_add_vif'
drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:7419: warning: No description found for return value of 'brcmf_setup_ifmodes'
Add the missing 'Return:' tags to the kernel-doc of these functions.
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20250106-brcmfmac-kdoc-v1-1-ed72196e21a1@oss.qualcomm.com
THe last use of il_get_single_channel_number() was removed in 2011 by
commit dd6d2a8aef ("iwlegacy: remove reset rf infrastructure")
when it was still called iwl_legacy_get_single_channel_number.
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241226011355.135417-3-linux@treblig.org
The last use of il3945_calc_db_from_ratio() was removed in 2010 by
commit ed1b6e99b5 ("iwlwifi: remove noise reporting")
when it was still called iwl3945_calc_db_from_ratio().
Remove it.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241226011355.135417-2-linux@treblig.org
The intention here is not clear but as this was already tested and matches
vendor driver it's better not to change behavior even if it looks suspicious.
So just remove the unused values.
Coverity-ID: 1525307
Signed-off-by: Ariel Otilibili <ariel.otilibili-anieli@eurecom.fr>
Acked-by: Stanislaw Gruszka <stf_xl@wp.pl>
[kvalo@kernel.org: write commit message]
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20241221124445.1094460-2-ariel.otilibili-anieli@eurecom.fr
