- Fix up the WG302 to support the v1 version (also tested)
- Fix up the syscon size
- Drop the alias for UART1 in GW7001
-----BEGIN PGP SIGNATURE-----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=ydjH
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=Vc2E
-----END PGP SIGNATURE-----
Merge tag 'ixp4xx-dts-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt
IXP4xx patches for the v5.18 kernel cycle:
- Fix up the WG302 to support the v1 version (also tested)
- Fix up the syscon size
- Drop the alias for UART1 in GW7001
* tag 'ixp4xx-dts-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: Drop serial 1 alias on GW7001
ARM: dts: ixp42x: Expand syscon register range
ARM: dts: ixp4xx: Fix up the Netgear WG302 device tree
Link: https://lore.kernel.org/r/CACRpkdaMk+XECwhXJYeiF8SMU6cQsj_dk8gGMoPE3zAURAPqTw@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Add battery thermal zones so we can monitor the battery temperature
- Enable charging options on AB8505
- Fix up all the AB8500 and AB8505 nodes in accordance with the new
schema.
- Fix the mounting matrix for the Janice phone.
-----BEGIN PGP SIGNATURE-----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=h414
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=PAPT
-----END PGP SIGNATURE-----
Merge tag 'ux500-dts-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt
Ux500 DTS updates for the v5.18 kernel cycle:
- Add battery thermal zones so we can monitor the battery temperature
- Enable charging options on AB8505
- Fix up all the AB8500 and AB8505 nodes in accordance with the new
schema.
- Fix the mounting matrix for the Janice phone.
* tag 'ux500-dts-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: ux500: Correct Janice accel mount matrix
ARM: dts: ux500: Update AB850[05] nodes
ARM: dts: AB8505: Enable charging options
ARM: dts: ux500: Add battery thermal zones and NTCs
Link: https://lore.kernel.org/r/CACRpkdaDcEqtSnWzRBnBHVweh2n=Dj3meHG9LND+K0Czb9ORGg@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- External interrupt (INTC-EX) support for the R-Car V3U SoC,
- Initial support for the RZ/G2LC and RZ/V2L SoCs, and the RZ/G2LC and
RZ/V2L SMARC EVK development boards,
- Support for MAX9286 GMSL deserializers and GSML cameras on the Eagle
and Condor development boards,
- NAND support for the RZ/N1D SoC,
- DMA engine (SYS-DMAC) support for the R-Car S4-8 SoC,
- LVDS support for the R-Car M3-W+ SoC,
- HDMI output and 9-axis sensor support for the Kingfisher (ULCB
extension) board,
- MAX96712 GMSL serializer support for the Falcon development board,
- MOST network support for the R-Car H3, M3-W, M3-W+, M3-N, E3, and D3
SoCs,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYgZjowAKCRCKwlD9ZEnx
cIq5AP4gwBDY8UmVVcKj9CWl+feTrHYxjFCrs/ALVcjS1EphmQEAwpK4TaqElJwb
pO2PuhfgYlCl0QwkkzYygxKFAlutjQg=
=24DK
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=YRMA
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-dt-for-v5.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.18
- External interrupt (INTC-EX) support for the R-Car V3U SoC,
- Initial support for the RZ/G2LC and RZ/V2L SoCs, and the RZ/G2LC and
RZ/V2L SMARC EVK development boards,
- Support for MAX9286 GMSL deserializers and GSML cameras on the Eagle
and Condor development boards,
- NAND support for the RZ/N1D SoC,
- DMA engine (SYS-DMAC) support for the R-Car S4-8 SoC,
- LVDS support for the R-Car M3-W+ SoC,
- HDMI output and 9-axis sensor support for the Kingfisher (ULCB
extension) board,
- MAX96712 GMSL serializer support for the Falcon development board,
- MOST network support for the R-Car H3, M3-W, M3-W+, M3-N, E3, and D3
SoCs,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (27 commits)
arm64: dts: renesas: rzg2lc-smarc: Use SW_SD0_DEV_SEL macro for eMMC/SDHI device selection
arm64: dts: renesas: rzg2lc-smarc: Enable CANFD channel 1
arm64: dts: renesas: rzg2lc-smarc: Enable SCIF1 on carrier board
arm64: dts: renesas: rzg2lc-smarc: Add macros for DIP-Switch settings
arm64: dts: renesas: rzg2l-smarc: Add common dtsi file
arm64: dts: renesas: rzg2lc-smarc: Enable microSD on SMARC platform
arm64: dts: renesas: rzg2lc-smarc-som: Enable eMMC on SMARC platform
arm64: dts: renesas: Add initial device tree for RZ/V2L SMARC EVK
arm64: dts: renesas: Add initial DTSI for RZ/V2L SoC
dt-bindings: clock: Add R9A07G054 CPG Clock and Reset Definitions
arm64: dts: renesas: ulcb/ulcb-kf: switch to use audio-graph-card2 for sound
arm64: dts: renesas: rcar-gen3: Add MOST devices
arm64: dts: renesas: Miscellaneous whitespace fixes
arm64: dts: renesas: falcon-csi-dsi: Add and connect MAX96712
arm64: dts: renesas: ulcb-kf: Add 9-asix sensor device
arm64: dts: renesas: ulcb-kf: Add KF HDMI output
arm64: dts: renesas: r8a77961: Add lvds0 device node
arm64: dts: renesas: r8a779f0: Add sys-dmac nodes
ARM: dts: r9a06g032: Describe the NAND controller
arm64: dts: renesas: Add GMSL cameras .dtsi
...
Link: https://lore.kernel.org/r/cover.1644587200.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Conversion of Samsung pinctrl bindings to dtschema followed up with
alignment of DTS files to the dtschema.
The entire work consists of three parts but everything should be merged
at once to avoid dtschema check errors:
1. Samsung pinctrl driver change necessary to accept new DTS (driver
depends on node names and this has to be adjusted because of dtschema).
2. Conversion to dtschema which brings requirement of different naming
of the GPIO nodes.
3. DTS commits depending on driver (1) above, which convert all GPIO pin
bank names to new naming, required by dtschema.
This also includes few cleanups around DTS which are here to avoid
any merge conflicts.
The Samsung pinctrl driver changes are backwards compatible. However
the DTS changes (renaming nodes) could cause problems in out-of-tree or
other project implementations of the driver.
-----BEGIN PGP SIGNATURE-----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=aFcq
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=CjdH
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-pinctrl-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung pinctrl DTS and driver changes for v5.18
Conversion of Samsung pinctrl bindings to dtschema followed up with
alignment of DTS files to the dtschema.
The entire work consists of three parts but everything should be merged
at once to avoid dtschema check errors:
1. Samsung pinctrl driver change necessary to accept new DTS (driver
depends on node names and this has to be adjusted because of dtschema).
2. Conversion to dtschema which brings requirement of different naming
of the GPIO nodes.
3. DTS commits depending on driver (1) above, which convert all GPIO pin
bank names to new naming, required by dtschema.
This also includes few cleanups around DTS which are here to avoid
any merge conflicts.
The Samsung pinctrl driver changes are backwards compatible. However
the DTS changes (renaming nodes) could cause problems in out-of-tree or
other project implementations of the driver.
* tag 'samsung-dt-pinctrl-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (28 commits)
arm64: dts: exynos: use dedicated wake-up pinctrl compatible in ExynosAutov9
ARM: dts: s5pv210: align pinctrl with dtschema
ARM: dts: s3c64xx: align pinctrl with dtschema
ARM: dts: s3c24xx: align pinctrl with dtschema
arm64: dts: exynos: align pinctrl with dtschema in ExynosAutov9
arm64: dts: exynos: align pinctrl with dtschema in Exynos7
arm64: dts: exynos: align pinctrl with dtschema in Exynos5433
ARM: dts: exynos: align pinctrl with dtschema in Exynos542x/5800
ARM: dts: exynos: align pinctrl with dtschema in Exynos5410
ARM: dts: exynos: align pinctrl with dtschema in Exynos5260
ARM: dts: exynos: align pinctrl with dtschema in Exynos5250
ARM: dts: exynos: align pinctrl with dtschema in Exynos4412
ARM: dts: exynos: align pinctrl with dtschema in Exynos4210
ARM: dts: exynos: align pinctrl with dtschema in Exynos3250
ARM: dts: s3c64xx: drop unneeded pinctrl wake-up interrupt mapping
ARM: dts: exynos: simplify PMIC DVS pin configuration in Peach Pi
ARM: dts: exynos: override pins by label in Peach Pi
ARM: dts: exynos: simplify PMIC DVS pin configuration in Peach Pit
ARM: dts: exynos: override pins by label in Peach Pit
ARM: dts: exynos: simplify PMIC DVS pin configuration in Odroid XU
...
Link: https://lore.kernel.org/r/20220129115352.13274-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. Minor improvements and dtschema fixes (node names, properties).
2. Fix issues pointed out by DT schema checks:
- Add necessary clock controller inputs on Exynos5260.
- Drop unsupported regulators on Odroid XU.
- Add USB DWC3 supplies.
- Drop old thermal properties from Exynos4210.
3. Add support for Samsung Chagall WiFi (Exynos5420, Samsung Galaxy Tab
S 10.5", SM-T800 ) and a similar Samsung Klimt WiFi (Samsung Galaxy
Tab S 8.4").
4. Add battery to Samsung P4Nnote (Exynos4412, Samsung Galaxy Note
10.1).
-----BEGIN PGP SIGNATURE-----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=N8hw
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=DfMW
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.18
1. Minor improvements and dtschema fixes (node names, properties).
2. Fix issues pointed out by DT schema checks:
- Add necessary clock controller inputs on Exynos5260.
- Drop unsupported regulators on Odroid XU.
- Add USB DWC3 supplies.
- Drop old thermal properties from Exynos4210.
3. Add support for Samsung Chagall WiFi (Exynos5420, Samsung Galaxy Tab
S 10.5", SM-T800 ) and a similar Samsung Klimt WiFi (Samsung Galaxy
Tab S 8.4").
4. Add battery to Samsung P4Nnote (Exynos4412, Samsung Galaxy Note
10.1).
* tag 'samsung-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (22 commits)
ARM: dts: exynos: use generic node name for LPDDR3 timings in Odroid
ARM: dts: exynos: add charger and battery to p4note
ARM: dts: exynos: update dma node name with dtschema
ARM: dts: exynos: use define for TMU clock on Exynos4412
ARM: dts: exynos: drop old thermal properties from Exynos4210
ARM: dts: exynos: add fake USB DWC3 supplies to SMDK5410
ARM: dts: exynos: add USB DWC3 supplies to SMDK5420
ARM: dts: exynos: add USB DWC3 supplies to Chromebook Peach Pi
ARM: dts: exynos: add USB DWC3 supplies to Chromebook Peach Pit
ARM: dts: exynos: add USB DWC3 supplies to ArndaleOcta
ARM: dts: exynos: add USB DWC3 supplies to Chromebook Spring
ARM: dts: exynos: add USB DWC3 supplies to Chromebook Snow
ARM: dts: exynos: add USB DWC3 supplies to SMDK5250
ARM: dts: exynos: add USB DWC3 supplies to Arndale
ARM: dts: exynos: Add support for Samsung Klimt WiFi
dt-bindings: arm: samsung: document Klimt WiFi board binding
ARM: dts: exynos: Add support for Samsung Chagall WiFi
dt-bindings: arm: samsung: document Chagall WiFi board binding
ARM: dts: exynos: drop unsupported MAX77802 regulators on Odroid XU
ARM: dts: exynos: add necessary clock controller inputs in Exynos5260
...
Link: https://lore.kernel.org/r/20220209145226.184375-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add Tesla FSD SoC ARM64 platform: bindings, DTSI+DTS, maintainer's entry
and defconfig change. This brings and enables this new platform.
This includes clock controller bindings (header files with clock IDs)
which are shared also with Tesla FSD SoC clock controller pull request.
-----BEGIN PGP SIGNATURE-----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=tXfh
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmIY47wACgkQmmx57+YA
GNnklg/8CNnZyxSIOo258Bixbpf7ArNIVXuwd2mDUQO5w/dt6/y1HPErk1x/FJO5
u4x3ugyCOJOPXnZy/We38M1NXJI7+RWfkvnHObGGLqsHf6YPICEUZqAlVuAT0fJn
eWGTD1XOmf3m7r6xpSn8W6dxZ31tU/ST3WcecSBEcX4URJULdtF5Umqyh7RXTjYL
HX3QvJwKxeNCnIUbsPJK7Iq0Y77AFgzPpn7iSO4qiP5lAK+YWRuT8jQKaIOGKJxz
lw5rkYhq8pQD0Amlm/DYxrvfJJZEU83FEzMxx9ZmeeU3LoixVvWgA2H0phjZP03k
0sbshjOhUSLFIfduk1oZSbkYxQAsDsF8r1Jvrbr5LrVI+2C7vQoqTwG+neaqksnp
CmNYDvAhugdVGHBGZTeQzeVMq8swV5o+3DJtlnKPp6gXlrJjFOECE63F4f1Pc+Fi
CE9KRBLqFSrdHyAfi3bwAcS8tTnhRYx6I6NYjCp+qa4wEREw8X8HBLDRemWsoqB2
T19W864mkGPPbkmxaf5/F9LcJNU8tSd86E3hSIn1fgusEKTkv50KaEZ0GrLV45ou
GYTAYfIVRG+9RZpQOlmHPMAJ2DIoHB1EXrvPmD73Tyrgo3sZhftClNkikZKbDGDp
XplUjSnClvsUBe4cbO4zVw/s7wQwIe8x+CEl/3Ry2L6MV/fysMY=
=l8Oq
-----END PGP SIGNATURE-----
Merge tag 'tesla-dt64-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Tesla FSD ARM64 changes for v5.18
Add Tesla FSD SoC ARM64 platform: bindings, DTSI+DTS, maintainer's entry
and defconfig change. This brings and enables this new platform.
This includes clock controller bindings (header files with clock IDs)
which are shared also with Tesla FSD SoC clock controller pull request.
* tag 'tesla-dt64-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: fsd: Add SPI device nodes
arm64: defconfig: Enable Tesla FSD SoC
arm64: dts: fsd: Add initial pinctrl support
arm64: dts: fsd: Add initial device tree support
dt-bindings: clock: Document FSD CMU bindings
dt-bindings: clock: Add bindings definitions for FSD CMU blocks
dt-bindings: arm: add Tesla FSD ARM SoC
dt-bindings: add vendor prefix for Tesla
Link: https://lore.kernel.org/r/20220204154112.133723-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Move the usb2_picophy1 and usb2_picophy2 nodes out of the soc section.
Since they are controlled via syscfg, there is no reg property needed,
which is required when having the node within the soc section.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Move the usb2_picophy1 and usb2_picophy2 nodes out of the soc section.
Since they are controlled via syscfg, there is no reg property needed,
which is required when having the node within the soc section.
Modification is done within stih410.dtsi and within related board
dts files (stih410-b2120.dts, stih410-b2260.dts).
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
The delta0 node within stih410.dtsi is identical to the
one already written within stih407-family.dtsi and included
within stih410.dtsi.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Move all nodes without reg property out of the soc section of
stih407-family.dtsi and DT including stih407-family.dtsi.
This avoid to set a <0> reg property.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Move quadfs and a9-mux clocks nodes into clockgen nodes so
that they can get the reg property from the parent node and
ensure only one node has the address.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Move quadfs and a9-mux clocks nodes into clockgen nodes so
that they can get the reg property from the parent node and
ensure only one node has the address.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Move quadfs and a9-mux clocks nodes into clockgen nodes so
that they can get the reg property from the parent node and
ensure only one node has the address.
Signed-off-by: Alain Volmat <avolmat@me.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
The Gateaway 7001 has a serial port alias for serial1, this has
proven detrimental on the WG302 so remove it on this machine
as well.
Drop in a small comment that this machine is based on IXP422.
Cc: Zoltan HERPAI <wigyori@uid0.hu>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We have at least 0x30 registers in the IXP42x syscon as
register 0x2c is actively used to read platform features.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The version we can support (because of access to the hardware)
is WG302v1, so rename the file and make the following
modifications:
- We have 32MB memory not 16MB
- The default console speed is 9600 baud so use this
- The device has no ATA disk nor USB so drop the /dev/sda1
default mount, this needs to mount ramdisk or NFS
- Both serial0 and serial1 cannot be assigned with aliases,
just assign serial0
- The Flash is just 8MB so augment the size
- The Flash FIS index is at eraseblock 0x3f
- The PHY is at MDIO address 30
Tested by bringing the Netgear WG302v1 up to userspace using
initramfs appended to the kernel and downloaded over TFTP,
then ifconfig to bring up eth0 and pinging the host. All
works fine including SSH into the device from the host.
Cc: Zoltan HERPAI <wigyori@uid0.hu>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The new YAML device tree bindings gives new and proper names
to several of the AB850[05] nodes and redefines the way we
use numbering on PWMs to use reg.
Update all the DTS nodes accordingly.
Add the missing thermal node to the AB8505.
Drop the debugfs nodes because these are not real devices.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
These are not disabled on the AB8500 and after testing we
see they work fine, so enable them on AB8505 too.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fixes dtbs_check warnings like:
'3-3-v-regulator' does not match any of the regexes: '.*-names$'
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>:wq
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Fixes dtbs_check warnings like:
'3-3-v-regulator' does not match any of the regexes: '.*-names$'
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
---
v2: fix compile error
Fixes dtbs_check warnings like:
pdma@ffda0000: $nodename:0: 'pdma@ffda0000' does not match '^dma-controller(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Fixes dtbs_check warnings like:
pdma@ffda0000: $nodename:0: 'pdma@ffda0000' does not match '^dma-controller(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Align the LED node names with dtschema to silence dtbs_check warnings
like:
leds: 'hps0', 'hps1', 'hps2' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The Synopsys DW MSHC bindings require node name to be 'mmc':
dwmmc0@ff808000: $nodename:0: 'dwmmc0@ff808000' does not match '^mmc(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The Intel SoCFPGA N5X SoC Development Kit is a board with
Agilex, so it needs its own compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The Intel SoCFPGA Agilex 10 SoC Development Kit is a board with
Agilex, so it needs its own compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The devicetree specification requires that node name should be generic.
The dtschema complains if name does not match pattern, so make the
0.33 V regulator node name more generic.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The Synopsys DW MSHC bindings require node name to be 'mmc':
dwmmc0@ff808000: $nodename:0: 'dwmmc0@ff808000' does not match '^mmc(@.*)?$'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The ARM timer is usually considered not part of SoC node, just like
other ARM designed blocks (PMU, PSCI). This fixes dtbs_check warning:
arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dt.yaml: soc: timer:
{'compatible': ['arm,armv8-timer'], 'interrupts': [[1, 13, 3848], [1, 14, 3848], [1, 11, 3848], [1, 10, 3848]]} should not be valid under {'type': 'object'}
From schema: dtschema/schemas/simple-bus.yaml
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The Altera SoCFPGA Stratix 10 SoC Development Kit is a board with
Stratix 10, so it needs its own compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The Altera SoCFPGA Arria 10 SoC Development Kit is a board with Arria 10,
so it needs its own compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The Enclustra Mercury AA1 is a module with Arria 10, so it needs its own
compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
The Altera SoCFPGA Arria V SoC Development Kit is a board with Arria 5,
so it needs its own compatible.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Add new compatible for Agilex based boards.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Add new compatible for Stratix 10 based boards.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Add new compatible for SoCFPGA VT boards/designs.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Add new compatible for Arria 10 based boards.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Add new compatible for Arria 5 based boards.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Several Cyclone 5 SoCFPGA based boards have additional board compatibles
which are not documented in the bindings.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
On RZ/G2LC SMARC EVK, CAN0 is not populated.
CAN1 is multiplexed with SCIF1 using SW1[3] or RSPI using SW1[4].
This patch adds support for the CAN1 interface on RZ/G2LC SMARC EVK.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220203170636.7747-5-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
SCIF1 interface is available on PMOD1 connector (CN7) on carrier board.
This patch adds pinmux and scif1 node to carrier board dtsi file for
RZ/G2LC SMARC EVK.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220203170636.7747-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
RZ/G2LC SoM uses DIP-SWitch SW1 for various pin multiplexing functions.
This patch describes DIP-SWitch SW1 settings on SoM and adds the
corresponding macros for enabling pinmux functionality on RZ/G2LC
SMARC EVK.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220203170636.7747-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
RZ/{G2L,V2L} and G2LC SoC use the same carrier board, but the SoM is
different.
Different pin mapping is possible on SoM. For eg:- RZ/G2L SMARC EVK
uses SCIF2, whereas RZ/G2LC uses SCIF1 for the serial interface available
on PMOD1.
This patch adds support for handling the pin mapping differences by moving
definitions common to RZ/G2L and RZ/G2LC to a common dtsi file.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20220203170636.7747-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
