Commit graph

661,541 commits

Author SHA1 Message Date
Souptick Joarder
b4b22a012e scsi: lpfc: Replace pci_pool_alloc by pci_pool_zalloc
In lpfc_new_scsi_buf_s3() and lpfc_new_scsi_buf_s4() pci_pool_alloc
followed by memset will be replaced by pci_pool_zalloc()

Signed-off-by: Souptick joarder <jrdr.linux@gmail.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Acked-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-30 11:40:20 -05:00
Cathy Avery
b0120d9906 scsi: storvsc: Payload buffer incorrectly sized for 32 bit kernels.
On a 32 bit kernel sizeof(void *) is not 64 bits as hv_mpb_array
requires. Also the buffer needs to be cleared or the upper bytes will
contain junk.

Suggested-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Cathy Avery <cavery@redhat.com>
Reviewed-by: K. Y. Srinivasan <kys@microsoft.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-30 11:38:24 -05:00
Quentin Lambert
338be07233 scsi: cxgb4i: Add a missing call to neigh_release
Most error branches following the call to dst_neigh_lookup contain a
call to neigh_release. This patch add these calls where they are
missing.

This issue was found with Hector.

Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com>
Acked-by: Varun Prakash <varun@chelsio.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-30 11:36:31 -05:00
Uma Krishnan
11f7b1844a scsi: cxlflash: Avoid command room violation
During test, a command room violation interrupt is occasionally seen
for the master context when the CXL flash devices are stressed.

After studying the code, there could be gaps in the way command room
value is being cached in cxlflash. When the cached command room is zero
the thread attempting to send becomes burdened with updating the cached
value with the actual value from the AFU. Today, this is handled with an
atomic set operation of the raw value read. Following the atomic update,
the thread proceeds to send.

This behavior is incorrect on two counts:

   - The update fails to take into account the current thread and its
     consumption of one of the hardware commands.

   - The update does not take into account other threads also atomically
     updating. Per design, a worker thread updates the cached value when a
     send thread times out. By not protecting the update with a lock, the
     cached value can be incorrectly clobbered.

To correct these issues, the update of the cached command room has been
simplified and also protected using a spin lock which is held until the
MMIO is complete. This ensures the command room is properly consumed by
the same thread. Update of cached value also takes into account the
current thread consuming a hardware command.

Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-30 11:34:01 -05:00
Uma Krishnan
3d2f617d44 scsi: cxlflash: Improve context_reset() logic
Currently, the context reset routine waits for command room to
be available before sending the reset request. Per review of the
SISLite specification and clarifications from the CXL Flash AFU
designers, this wait is unnecessary. The reset request can be
sent anytime regardless of command room, so long as only a single
reset request is active at any one point in time.

This commit simplifies the reset routine by removing the wait for
command room. Additionally it adds a debug trace to help pinpoint
hardware errors when a context reset does not complete.

Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-30 11:34:01 -05:00
Uma Krishnan
8a2605430a scsi: cxlflash: Fix crash in cxlflash_restore_luntable()
During test, the following crash was observed:

[34538.981505] Faulting instruction address: 0xd000000007c9c870
cpu 0x9: Vector: 300 (Data Access) at [c0000007f1e8f590]
    pc: d000000007c9c870: cxlflash_restore_luntable+0x70/0x1d0 [cxlflash]
    lr: d000000007c9c84c: cxlflash_restore_luntable+0x4c/0x1d0 [cxlflash]
    sp: c0000007f1e8f810
   msr: 9000000100009033
   dar: c00000171d637438
 dsisr: 40000000
  current = 0xc0000007f1e43f90
  paca    = 0xc000000007b25100   softe: 0        irq_happened: 0x01
    pid   = 493, comm = eehd
enter ? for help
[c0000007f1e8f8a0] d000000007c940b0 init_afu+0xd60/0x1200 [cxlflash]
[c0000007f1e8f9a0] d000000007c945a8 cxlflash_pci_slot_reset+0x58/0xe0 [cxlflash]
[c0000007f1e8fa20] d00000000715f790 cxl_pci_slot_reset+0x230/0x340 [cxl]
[c0000007f1e8fae0] c000000000040dd4 eeh_report_reset+0x144/0x180
[c0000007f1e8fb20] c00000000003f708 eeh_pe_dev_traverse+0x98/0x170
[c0000007f1e8fbb0] c000000000041618 eeh_handle_normal_event+0x328/0x410
[c0000007f1e8fc30] c000000000041db8 eeh_handle_event+0x178/0x330
[c0000007f1e8fce0] c000000000042118 eeh_event_handler+0x1a8/0x1b0
[c0000007f1e8fd80] c00000000011420c kthread+0xec/0x100
[c0000007f1e8fe30] c00000000000a47c ret_from_kernel_thread+0x5c/0xe0

When superpipe mode is disabled for a LUN, the references for the
local lun are deleted but the LUN is still identified as being present
in the LUN table. This mismatched state can result in the above crash
when the LUN table is restored during an error recovery operation.

To fix this issue, the local LUN information structure is updated to
reflect the LUN is no longer in the LUN table once all references to
the LUN are gone.

Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-30 11:34:00 -05:00
Uma Krishnan
68ab2d76e4 scsi: cxlflash: Set sg_tablesize to 1 instead of SG_NONE
The following Oops is encountered when blk_mq is enabled with the
cxlflash driver:

[ 2960.817172] Oops: Kernel access of bad area, sig: 11 [#5]
[ 2960.817309] NIP  __blk_mq_run_hw_queue+0x278/0x4c0
[ 2960.817313] LR __blk_mq_run_hw_queue+0x2bc/0x4c0
[ 2960.817314] Call Trace:
[ 2960.817320] __blk_mq_run_hw_queue+0x2bc/0x4c0 (unreliable)
[ 2960.817324] blk_mq_run_hw_queue+0xd8/0x100
[ 2960.817329] blk_mq_insert_requests+0x14c/0x1f0
[ 2960.817333] blk_mq_flush_plug_list+0x150/0x190
[ 2960.817338] blk_flush_plug_list+0x11c/0x2b0
[ 2960.817344] blk_finish_plug+0x58/0x80
[ 2960.817348] __do_page_cache_readahead+0x1c0/0x2e0
[ 2960.817352] force_page_cache_readahead+0x68/0xd0
[ 2960.817356] generic_file_read_iter+0x43c/0x6a0
[ 2960.817359] blkdev_read_iter+0x68/0xa0
[ 2960.817361] __vfs_read+0x11c/0x180
[ 2960.817364] vfs_read+0xa4/0x1c0
[ 2960.817366] SyS_read+0x6c/0x110
[ 2960.817369] system_call+0x38/0xb4

The SCSI blk_mq stack assumes that sg_tablesize is always a non-zero
value with scsi_mq_setup_tags() allocating tags using sg_tablesize.
The cxlflash driver currently uses SG_NONE (0) for the sg_tablesize
as the devices it supports are not capable of scatter gather. This
mismatch of values results in the Oops above.

To resolve this issue, sg_tablesize for cxlflash can simply be set
to 1, a value which satisfies the constraints in cxlflash and the
lack of support of SG_NONE in SCSI blk_mq.

Signed-off-by: Uma Krishnan <ukrishn@linux.vnet.ibm.com>
Acked-by: Matthew R. Ochs <mrochs@linux.vnet.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2016-11-30 11:34:00 -05:00
Takashi Iwai
d252800608 ASoC: rt5670: Add missing 10EC5072 ACPI ID
rt5670 driver supports also RT5672 codec, but its ACPI ID is missing.
This was found on Dell Wyse 3040 box.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-30 16:24:35 +00:00
Takashi Iwai
b4ff47d284 ASoC: rt5670: Enable Braswell platform workaround for Dell Wyse 3040
Dell Wyse 3040 requires the platform workaround for enabling dmic and
jack detection as defined for Braswell CRB.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-30 16:24:13 +00:00
Takashi Iwai
6648eb8666 ASoC: Intel: Add missing 10EC5672 ACPI ID matching for Cherry Trail
Add the missing ACPI ID 10EC5672 for Cherry Trail, which bounds with
cht-bsw-rt5672 driver.  This combination was found on Dell Wyse 3040.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-30 16:23:28 +00:00
Uwe Kleine-König
7348291058 spi: orion: fix comment to mention MVEBU
MVEBU chips (Armada XP, Armada 370 and others) are supported by this
driver. Mention this in the help text to make more obvious what is
already specified in the dependencies of this symbol.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2016-11-30 16:22:46 +00:00
Arnd Bergmann
ba9cb7b9ff Merge branch 'for-4.10-ti-sci-base' of https://github.com/t-kristo/linux-pm into next/drivers
Merge "ARM: keystone: add TI SCI protocol support for v4.10" from
Tero Kristo:

[description taken from http://processors.wiki.ti.com/index.php/TISCI

Texas Instruments' Keystone generation System on Chips (SoC) starting
with 66AK2G02, now include a dedicated SoC System Control entity called
PMMC(Power Management Micro Controller) in line with ARM architecture
recommendations. The function of this module is to integrate all system
operations in a centralized location. Communication with the SoC System
Control entity from various processing units like ARM/DSP occurs over
Message Manager hardware block.

...

Texas Instruments' System Control Interface defines the communication
protocol between various processing entities to the System Control Entity
on TI SoCs. This is a set of message formats and sequence of operations
required to communicate and get system services processed from System
Control entity in the SoC.]

* 'for-4.10-ti-sci-base' of https://github.com/t-kristo/linux-pm:
  firmware: ti_sci: Add support for reboot core service
  firmware: ti_sci: Add support for Clock control
  firmware: ti_sci: Add support for Device control
  firmware: Add basic support for TI System Control Interface (TI-SCI) protocol
  Documentation: Add support for TI System Control Interface (TI-SCI) protocol
2016-11-30 17:13:13 +01:00
Arnd Bergmann
f21b65881c arm64: tegra: Device tree changes for v4.10-rc1
This adds initial support for Tegra186, the P3310 processor module as
 well as the P2771 development board. Not much is functional, but there
 is enough to boot to an initial ramdisk with debug serial output.
 -----BEGIN PGP SIGNATURE-----
 
 iQIwBAABCAAaBQJYMsltExx0cmVkaW5nQG52aWRpYS5jb20ACgkQ3SOs138+s6HY
 8g/7Bf5ieQkhnW4fHAicTnX+5zXJEiQZrlCYfOzNq1nyGi/NBrcAVajQTRhL1g/k
 cSKESq7OrjmhAlhHUWEaHHicnzax6jLwrUaj/ozcAti5m8iXOz+JnD184fE3CqcJ
 5DGp26k0vrPcc47u2SIWjx1u4coUssYxLjsyoR2NJPZkWYMKpPL7rK969PizlAID
 ajbixuLgd4N6utWPz2o3j+23hXf03rXaPrZ6d9khsAvGQBkQx4QJAIbsKJrBbGR9
 UbZbTDPgJGmvpa12IK0tblTKbHahhAkxRj5dX8F4eCwZBVmYp9fx+qLLKKdzoO5R
 pZmMQiT24j0RNlC4CTPRI7wVBr6x5m1UtcuEq9exipsdocC1/AAm9iD5U09gX41T
 7kBcQ/mIl62CSxoaNNjSoHi+hK+HRyqIcR2tjWe+HhkJONCcPi7zUZvtSkM85n7v
 8z26KxFJpjpXd+Bg8oC3eIBbYxZOBoa5YzK4zDCA5znrGD0HSxUHtetYFru5LX7u
 sVLc+wXfAuqKS/uh8FzVtk/tTrjib82OngQkD5ofGn3IkXEuIueLU4o4C8VhNt1n
 7bH3MwWoahcUWQiH1/GwXglw1X6J2wE6isvF9u08pYg0nIfZsSPvbRjRriZzgk1v
 dyBsZxnLpWGJPxly5H+3u9+XUetKPuZZs2EQxzwauoUNIjo=
 =iXdy
 -----END PGP SIGNATURE-----

Merge tag 'tegra-for-4.10-arm64-dt-numeric-ids' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt64

Pull "arm64: tegra: Device tree changes for v4.10-rc1" from Thierry Reding:

This adds initial support for Tegra186, the P3310 processor module as
well as the P2771 development board. Not much is functional, but there
is enough to boot to an initial ramdisk with debug serial output.

* tag 'tegra-for-4.10-arm64-dt-numeric-ids' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
  arm64: tegra: Add NVIDIA P2771 board support
  arm64: tegra: Enable PSCI on P3310
  arm64: tegra: Add NVIDIA P3310 processor module support
  arm64: tegra: Add GPIO controllers on Tegra186
  arm64: tegra: Add SDHCI controllers on Tegra186
  arm64: tegra: Add I2C controllers on Tegra186
  arm64: tegra: Add serial ports on Tegra186
  arm64: tegra: Add CPU nodes for Tegra186
  arm64: tegra: Add Tegra186 support
2016-11-30 17:07:13 +01:00
David S. Miller
492e9d8c18 Merge branch 'liquidio-VF'
Raghu Vatsavayi says:

====================
liquidio VF operations

This patchseries adds support for VF device specific operations
like mailbox, queues and register access. This V3 patchset also
has changes based on comments form earlier versions:

1) Removed extra 'void *' casting.
2) Fixed all cross compilations issues reported on S390 and Powerpc
   architectures.

Please apply the patches in following order as these patches depend
on each other.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30 11:03:10 -05:00
Raghu Vatsavayi
b3c35973b8 liquidio CN23XX: VF init and destroy
Adds support for VF initialization and destroy resources.

Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com>
Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30 11:03:09 -05:00
Raghu Vatsavayi
cf39faf542 liquidio CN23XX: VF interrupt
Adds support for VF interrupt processing.

Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com>
Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30 11:03:09 -05:00
Raghu Vatsavayi
f7cdd64bed liquidio CN23XX: VF mailbox
Adds support for VF mailbox setup.

Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com>
Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30 11:03:09 -05:00
Raghu Vatsavayi
9003baf09e liquidio CN23XX: init VF softcommand queues
Adds support for initializing softcommand, dispatch and
instructions queues for VF.

Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com>
Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30 11:03:09 -05:00
Raghu Vatsavayi
da15c78b56 liquidio CN23XX: VF register access
This patch adds support for VF device register access.

Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com>
Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30 11:03:09 -05:00
Raghu Vatsavayi
c865cdf13a liquidio CN23XX: VF queue setup
Adds support for configuring VF input/output queues.

Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com>
Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30 11:03:08 -05:00
Raghu Vatsavayi
69c69da33d liquidio CN23XX: VF config setup
Adds support for setting up VF configuration.

Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com>
Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30 11:03:08 -05:00
Raghu Vatsavayi
111fc64a23 liquidio CN23XX: VF registration
Adds support for cn23xx VF probe and registration.

Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com>
Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30 11:03:08 -05:00
Raghu Vatsavayi
547be9ec12 liquidio CN23XX: VF register definitions
Adds support for CN23xx VF registers.

Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@caviumnetworks.com>
Signed-off-by: Derek Chickles <derek.chickles@caviumnetworks.com>
Signed-off-by: Satanand Burla <satananda.burla@caviumnetworks.com>
Signed-off-by: Felix Manlunas <felix.manlunas@caviumnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30 11:03:08 -05:00
Arnd Bergmann
e7541f90d4 SCPI updates for v4.10
1. Adds support for pre-v1.0 SCPI protocol versions
 
 2. Adds support for SCPI used on Amlogic GXBB SoC platforms using the
    newly added pre-v1.0 SCPI protocol
 
 3. Decouples some platform specific details from generic SCPI binding
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCAAGBQJYLe2FAAoJEABBurwxfuKYdgEP/1cRf/i5cBZ6oi1UI6Ycelse
 R+FTI/tzAWks6mfxhd5YWTe1NuEhI0QMtUyOK1I6lEGdH2IIMBOOVJj6inM/bR+X
 ydleMTB7oKr8bzgqBogb5OOVeMVgNmFUfMojH2RBY7bQpWthvywWSEShila8mmUB
 FXFP2yy6rSpo6gncU4kJa0yFO8SFFKraEhyFZrXgYs4IgI277wPw22uFnPqUBC9s
 I2BOqHZB6K7J3kwCbl0qvljrjjk36/He1McgCfB+XzUWaz0Mr4uTBSh/iAhb/IV6
 JmHE/E2WEznpeM9JtqTZugiODGbsbGtwXPVq/jhu8u9viSCdqfpziR8HB+ChZM/O
 HZtbUFowtGH3LeT79tv+tf1bPU9QXLSmI/+E0xvTHL3PaITCANB216FJTwJz90PY
 Ull1sJqXgVuaWDCzD10Vyg8AssaLdSj+c5yYcvFIy8xVLl43GC3TLfLWZOqLONmY
 LxATk7splSD7ZIPdW0wDO25UoNzFopDfBjTW2slvgwph9ccV5Z5PtIl8p6jmRcPV
 MUQSZS8P4RkkWJuELiUPcKuwIj3Cp0syXql832w5EO8UY1DeumaRjaz9LYjiS3tS
 ENiSCi2HhthPpgkkpUKxLTziQ8KtFdp80JMXUTHLOxqJWK/+eX2cH9saWhTrc6QO
 Mk+o9CdLKIwDEaJTImzR
 =CgDX
 -----END PGP SIGNATURE-----

Merge tag 'scpi-updates-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/drivers

Pull "SCPI updates for v4.10" from Sudeep Holla:

1. Adds support for pre-v1.0 SCPI protocol versions

2. Adds support for SCPI used on Amlogic GXBB SoC platforms using the
   newly added pre-v1.0 SCPI protocol

3. Decouples some platform specific details from generic SCPI binding

* tag 'scpi-updates-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  firmware: arm_scpi: add support for pre-v1.0 SCPI compatible
  Documentation: bindings: Add support for Amlogic GXBB SCPI protocol
  Documentation: bindings: add compatible specific to pre v1.0 SCPI protocols
  Documentation: bindings: decouple juno specific details from generic binding
  firmware: arm_scpi: allow firmware with get_capabilities not implemented
  firmware: arm_scpi: add alternative legacy structures, functions and macros
  firmware: arm_scpi: increase MAX_DVFS_OPPS to 16 entries
  firmware: arm_scpi: add command indirection to support legacy commands
2016-11-30 17:01:23 +01:00
Daniele Di Proietto
f92a80a997 openvswitch: Fix skb leak in IPv6 reassembly.
If nf_ct_frag6_gather() returns an error other than -EINPROGRESS, it
means that we still have a reference to the skb.  We should free it
before returning from handle_fragments, as stated in the comment above.

Fixes: daaa7d647f ("netfilter: ipv6: avoid nf_iterate recursion")
CC: Florian Westphal <fw@strlen.de>
CC: Pravin B Shelar <pshelar@ovn.org>
CC: Joe Stringer <joe@ovn.org>
Signed-off-by: Daniele Di Proietto <diproiettod@ovn.org>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30 11:00:45 -05:00
Arnd Bergmann
44b736d0a0 SoCFPGA update for v4.10
- Fixup spelling error
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYMxwiAAoJEBmUBAuBoyj0rMoQAIOsU/nJsoAfxGbsPXOXMmXn
 qtUPKe8xdEWKfguk5PkQsFcc7+LpI1gXvQK+JcHrif0bpop6HKUHlMwtHgdTkB+a
 DWTVQwvukE7QmxqBPKIUEIEKjjYZA0Bn4L6cSMTGEXRSmuslGMN3kLyyKm7ARGT4
 AjQiNsG3JqWDRcBL5k98GfNKABuijD/GkBedQWbBJyayfyYkP65nGLTXlYYl4B8d
 RLswX0sqmHV9PEIrnGc8pOvz3yB+DpwD7DTplbWMaY/u6kPZvRE+FwF4d2smJ9M1
 2o8jxahrS2jcGEZpPVvXSn5TdNz3EY9EKwKSe3pGGLu8hvMniUFLV24F3KYm4NFw
 413i5UV7XQwv7GYjb5k/PQqInsfsPh8tMJ7GcHkW3YK/ZWNIiwXQllJvoqKd8Q9d
 NxoS18NAG+IfLhlqikMrErvdWxpGY9eWlIJ+/e3iF49m++BQ2p6Z5OivuJ4m0hGn
 /Xc3Zyf72JrS++qdu5I2XmmsBbu6Wva5mLhwWNc2K523FIvDtXzTo8hBWo5ca1ne
 EcWxBtJp98/DMcLbSJZU4sEQEXLQf/S5GzmbKFMJkEn+QUlNYIlvOAp/CnIFukFf
 m6L0Ji+w63ux/au9ztZSHDqIgdOhHepPiZ4oGHb+1v6i7SSZb6pWZjtXPp3fa+P9
 0UHli9XdN/15wY2E8Kp4
 =o8Ax
 -----END PGP SIGNATURE-----

Merge tag 'socfpga_updates_for_v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/fixes-non-critical

Pull "SoCFPGA update for v4.10" from Dinh Nguyen:

- Fixup spelling error

* tag 'socfpga_updates_for_v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: socfpga: fix spelling mistake in error message
2016-11-30 16:58:25 +01:00
Arnd Bergmann
82076f8112 SoCFPGA DTS update for v4.10, part 3
- Fine tune L2 cache configuration
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYMxrIAAoJEBmUBAuBoyj0+kUP+QHzmJNBzUfyYciec/aJFqND
 isZNZhzm3zyvw5UEu5tbWiPkv2Vwp/MYODX/pK1SFKQRH0TlR0cTXdXQH+TVubgb
 JhHebwCNYgn8iUxyPQhBtY1Sux8sHYDWf4JvZkrcFQWSsURS2Y4gm81O+ix5JYWB
 qT1XipgtMpYzAU1qKH30AdCcqQ5fM2kjTvi1a1pOui2YWuFJVrfw50Z5rUILpIFU
 zFxmZFZ9+geAyAnD16KNcOcZCNZS6y1QjfDdR7TlwuuGpyIvNzJ2sZGohZUCN/of
 ZKuGRQ37JnCK2o5Y2mW4b2QFnJR1cQ9Y/GxzLmiN0DYC99T6GZzQp5V2+CgIwyxB
 UGULZJpUk+uiJpDnUwvv9lTFhAdSOz8jGmH/ufSR/QDFKqWvg/LXmhJMqY2F4rew
 ag3IKmkOx2Wny91G+CBe0hAPD7TII69uioPfZJv7v46zSJXifP/bQMypWpSU9fNe
 +GfYgvxwzXhN3KKeqR/xe+unNoHbgHnWde2gp7hmr4P+57///T64+h6yqQmwYAGH
 XNWYdG3+/3E7rBeX7LZ/cCM96N5922LIPipU+RltdpNaejpGgIc45LWnfbCjcs1a
 0jDXtnox/TfgZozbg2vmRCuOkpQzki36OlQ7/4QQbybe1o52Iuvi7LeKTKGdsIQ1
 GPQktgQWGE2lratp8nqF
 =jB8b
 -----END PGP SIGNATURE-----

Merge tag 'socfpga_dts_for_v4.10_part_3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt

Merge "SoCFPGA DTS update for v4.10, part 3" from Dinh Nguyen:

- Fine tune L2 cache configuration

* tag 'socfpga_dts_for_v4.10_part_3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: dts: socfpga: fine-tune L2 cache configuration
2016-11-30 16:57:12 +01:00
Geert Uytterhoeven
8879f9ffab arm64: defconfig: Do not lower CONFIG_LOG_BUF_SHIFT
The default value of 17 for CONFIG_LOG_BUF_SHIFT is much more suitable
than 14. The latter easily leads to lost kernel messages on systems with
only one CPU core.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
2016-11-30 16:56:15 +01:00
Arnd Bergmann
db30a7ae1d Second Round of Renesas ARM64 Based SoC DT Updates for v4.10
Enhancements:
 * Add device nodes for PRR
 * Add m3ulcb board
 * Enable I2C on r8a7796/salvator-x board
 * Enable SDHI0 on h3ulcb board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYMtUrAAoJENfPZGlqN0++MtQP/0QGZk5T/obJEmsApz+pyjv6
 mnHbxN385zjTKDKRxwCK6y1lFqdASMlvHd0vzk/nqn7f7nrqHFchkOKq5jtIKhZk
 tsLDsvGoQJ6dOKhoGtYqGA7jjVNplowyW3XbAUj2XqybWRfSSKuYAhkSb8XwHQJI
 U6BJbSJlAoMmOaczn88ncgMW6yYfQjmNmBPI8was6PVTk366oJfciJDatJNJzPab
 jko9ATFuC/LW3yJv/v0k8b5qtbINuk9+OfVzPk9h64LoTuld5/gKfyGvN5L5mwEb
 bSUTyJyvi8w/fO7sAaZiQpTZNUkoVHF474UuoiLv7xskDEXtenmUR1dXP9pNo+Yv
 IxgbbddQECbEEzrAyz0weucSLNY2SFDUzw2xGz5+an2uBIrshgUS2Hc9ysmflalq
 SzoQ1hjft/Ew18OIc+8AH0LAth63AoM1dCxqiJV1SFUtPHFeGnKlJah0g6rCXv1i
 zOPPjRkMVjmFygwf+DmlAgX3JJjIjMLBeodwlKt1ta5E0AKPDKO2l9dDXPBP40Oe
 n0/M9nZKCIb4j9q4n3iEwB+KjhCf0xORlQ4Dft5ctfIKIR426ll5bqdO6R9C0kuQ
 A4dlye1tygvryvRpcoMaulwYhazHslTkq75Eav+a1N2b5YtgUzHWm/km3UG3Li6J
 yHbn4MU6oOTVgGfezTFQ
 =Ywj/
 -----END PGP SIGNATURE-----

Merge tag 'renesas-arm64-dt2-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt64

Pull "Second Round of Renesas ARM64 Based SoC DT Updates for v4.10" from Simon Horman:

Enhancements:
* Add device nodes for PRR
* Add m3ulcb board
* Enable I2C on r8a7796/salvator-x board
* Enable SDHI0 on h3ulcb board

* tag 'renesas-arm64-dt2-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  arm64: dts: r8a7796: Add device node for PRR
  arm64: dts: r8a7795: Add device node for PRR
  arm64: dts: h3ulcb: rename SDHI0 pins
  arm64: dts: h3ulcb: enable SDHI2
  arm64: dts: m3ulcb: enable SDHI2
  arm64: dts: m3ulcb: enable SDHI0
  arm64: dts: m3ulcb: enable WDT
  arm64: dts: m3ulcb: enable EXTALR clk
  arm64: dts: m3ulcb: enable GPIO keys
  arm64: dts: m3ulcb: enable GPIO leds
  arm64: dts: m3ulcb: enable SCIF clk and pins
  arm64: dts: m3ulcb: initial device tree
  arm64: dts: m3ulcb: add M3ULCB board DT bindings
  arm64: dts: h3ulcb: update header
  arm64: dts: h3ulcb: update documentation with official board name
  arm64: dts: r8a7796: salvator-x: enable I2C
  arm64: dts: r8a7796: Enable I2C DMA
  arm64: dts: r8a7796: add I2C support
2016-11-30 16:51:07 +01:00
Arnd Bergmann
bc28ba81db Renesas ARM Based SoC Match Updates for v4.10
* Identify SoC and register with the SoC bus
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYNeyaAAoJENfPZGlqN0++1WsQAJ6Yq6mB9+TlmKQSDmspMd1X
 cuswMJowQZSFWjiXT/3v6lUNBG7wJmXbJOWIu/V9HIAx3HXS860DRtEC0+CosZ1g
 yP/+i8g5qHtYNtOG06RaP62gJql+nMizfvtTVNlFBz5/r6Pt6Cw2VKZm/J5eIenv
 zjWwkCOH2JAcAfVu1JfqXNoNwkrPp/tbTXmodQsqm7WYNiwfk2gXNqKhROirWR0s
 n2oHVhEts1Q82i116p1mx3m7CYvned5jqph06KyHWutbxNbGGi9ikIOmS0B6ayyw
 TSU1lAsF2xIff1JDJpGkZoIZAt0NKAfSYzumz1s98Yj+8cXMVZ/IL/C4orkqV8fk
 20K3ZYyBD3fDl38OtqGDOCTX7uOLumPCmoCLdKwmEYX2ig4PbK5pNbwQNMTFH4iE
 iqGXaicbs94izsDg0hUMALfAI4oG7TwTEDGnmLfXbOx58FJPtw+VcxArt0QiaLaf
 TdrNfVyl+wMu1cvOxqI3ftmzhlzpdoLoFNrZxPORAurEGN45SzDZylnLvfxByQy4
 WixQPdS/pHofdKmvIVXIdVzxnO0xRmxAp1tZ8nYw4rkseSGvLnK9Z4d43kzvoTsr
 IW+rJBBgLIcyor6HWrSgjWK9T15FEDBbrk5U1d06IViBdYwi1c6U8y80LCaAB+8j
 y3IwB4GFFkiTUU6j3H75
 =DnnT
 -----END PGP SIGNATURE-----

Merge tag 'renesas-soc-match-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers

Merge "Renesas ARM Based SoC Match Updates for v4.10" from Simon Horman:

* Identify SoC and register with the SoC bus

* tag 'renesas-soc-match-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  soc: renesas: Identify SoC and register with the SoC bus
  ARM: shmobile: Document DT bindings for Product Register

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-11-30 16:49:22 +01:00
Arnd Bergmann
ae1d0a466e soc_device_match() interface for matching against soc_bus attributes
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYJDsDAAoJEEgEtLw/Ve77SFEP/1E64/Toxi48RM2e37mtbRRp
 Dye1FUXxJY67USKx9eBYMGUHaV+QOxiifN7SfU0JgovGYtyAZeerbEbibT2TYN3V
 c9OP/sKUdAriqv/U4MX+2YiQJJS7zHvVt4yk+ZMU3e9dj8d2ndZKCw1rueGDZekn
 YjI0yNJdHsd08iZ+zrz/UaGeb0lZOzsQNIH+9rMs3GHfwXzLhh6NoYvQVrneu/Cd
 0mDKrFqPVmWNETr2qoyZtrVQefgOKffmw10MfFfeItCMWYpbdjBhR0EuONSMv45q
 Sk3IHNUU049FnU7ucJHJIIcsPqXUicRDbyonotb8QDx//TCwvPwkiEt2tW/TRgBn
 J9I+q9sIhLTcHGxuYTaWNvNUo9PGcKHWp+7dHhuPs9R1s8OqpFS/Fu371jQmFxGr
 6eSxMED7aGb3qJKKp60vFBnKcivVyRpj0mpwtLDrFLZwl+hT9dH4gto7SBuA6x9U
 8XnEyySYsoIETyLhuiladURs9UssbHfAxeoX5zMioZ13PoDnnQQSlhUNnpc7XAtc
 skTa23JsZAfV+UTvu6A//cGd+Jch72Gf6fIVCNGxkn9+FPA4RAktpGciHTSpKRzF
 +sAAo8g/usW3q0GQQWZqzJZxbOQ8B8dyMTXtp2LT4HGrZT67fJS2tRVMl9X8t+tk
 CnCCUJ/FcghiP6/Ou4zM
 =xyGw
 -----END PGP SIGNATURE-----

Merge tag 'soc-device-match-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into next/drivers

Pull "soc_device_match() interface for matching against soc_bus attributes"
from Geert Uytterhoeven:

This provides core infrastructure as a dependency for several users
(Freescale/NXP, Samsung, Renesas).

Its core parts have been acked by Greg, and the fixes by Arnd and/or
Greg (the last fix only received an informal ack, that's why I hadn't
added the ack).

This has already been pulled by Ulf, and is present in mmc/next, as a
dependency for a Freescale/NXP driver update.

* tag 'soc-device-match-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  base: soc: Provide a dummy implementation of soc_device_match()
  base: soc: Check for NULL SoC device attributes
  base: soc: Introduce soc_device_match() interface
  base: soc: Early register bus when needed
2016-11-30 16:48:06 +01:00
Arnd Bergmann
9de194ff11 Second Round of Renesas ARM Based SoC DT Updates for v4.10
Enhancements:
 * Add device nodes for PRR
 * Add r8a7745 SoC and sk-rzg1e board
 * Add r8a7743 SoC and sk-rzg1m board
 * Enable SDR-104 and I2C demuxer on alt, koelsch and lager boards
 
 Corrections:
 * Use SYSC "always-on" PM Domain for sound on r8a7794 SoC
 * Correct hsusb parent clock on r8a7794 SoC
 * Correct PFC names for DU on alt board
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYNfQEAAoJENfPZGlqN0++jt8P+gLdkKlX5TdEzg0U5IDBGd/U
 UQ0hCxx7aDUibsS9Pad+0R74QZj0M10Je0E+TFFQ8UDIh7jZ087K4/6wYDjFWemU
 sGi9gO2eNG8nEkJ2yfeXGQp4e4KeUCRvlrrdWM7hJAdw9jnuSu+h2TdfHxOLasXr
 7iB1GOQtjpaCL93Iv+R1dql/r+xAtCYvf5aKSTYcdlQ3fV2vsErbEkyYm/wUcUSZ
 3geFhsZJLSYAIs0ucZjysLPWNtyWwc4F7BwUxS8yfXXnHZhzzr7W3kjt/bxpul9N
 f+0vRp7pwXvRZbzZh1pGH2/h5kbu4vRl3+WBSSGGNqnaKyXsI5beB0PVV8RGnUdq
 qgt6fdCFbFQ9bAAoWijn9fOPXDqhN5ZQXlOJjUPSW6AtJ6JwdDXiPwxn9YYpfb//
 aGQCYt/bzFoJyyEBnQNQd7Ay8xHRxEv3JvFKb8oxNsWSI1cWuLfemW6kBYcnaH3n
 I9DRe5TorLqHxfQEmdz68rhDuf3D9QWSYcrd5tBee72mnQD5HGn+AEKsjkelD0zU
 vKTWBykwX/XWSw13rIkUoMyI3ajRH5tM6BrwnQWILwikix29Zj1CrDnux7mFK16D
 UWm9f8vqn+yO2Gz9WGfsS+YUtPIuPIMNjzB9ZbeT5eMu82nkBqsgXx8lmb8YQIpJ
 soCYf2YgU+4WGZF8Tlqi
 =YQDm
 -----END PGP SIGNATURE-----

Merge tag 'renesas-dt2-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Pull "Second Round of Renesas ARM Based SoC DT Updates for v4.10" from Simon Horman:

Enhancements:
* Add device nodes for PRR
* Add r8a7745 SoC and sk-rzg1e board
* Add r8a7743 SoC and sk-rzg1m board
* Enable SDR-104 and I2C demuxer on alt, koelsch and lager boards

Corrections:
* Use SYSC "always-on" PM Domain for sound on r8a7794 SoC
* Correct hsusb parent clock on r8a7794 SoC
* Correct PFC names for DU on alt board

* tag 'renesas-dt2-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (33 commits)
  ARM: dts: r8a7794: Add device node for PRR
  ARM: dts: r8a7793: Add device node for PRR
  ARM: dts: r8a7792: Add device node for PRR
  ARM: dts: r8a7791: Add device node for PRR
  ARM: dts: r8a7790: Add device node for PRR
  ARM: dts: r8a7779: Add device node for PRR
  ARM: dts: r8a73a4: Add device node for PRR
  ARM: dts: sk-rzg1e: add Ether support
  ARM: dts: sk-rzg1e: initial device tree
  ARM: dts: r8a7745: add IRQC support
  ARM: dts: r8a7745: add Ether support
  ARM: dts: r8a7745: add [H]SCIF{|A|B} support
  ARM: dts: r8a7745: add SYS-DMAC support
  ARM: dts: r8a7745: initial SoC device tree
  ARM: dts: sk-rzg1m: add Ether support
  ARM: dts: sk-rzg1m: initial device tree
  ARM: dts: r8a7743: add IRQC support
  ARM: dts: r8a7743: add Ether support
  ARM: dts: r8a7743: add [H]SCIF{A|B} support
  ARM: dts: r8a7743: add SYS-DMAC support
  ...
2016-11-30 16:44:12 +01:00
Arnd Bergmann
0b4160976f Renesas RZ/G1M and RZ/G1E CPG Core Clock Definitions
Shared by clock drivers, and DTS files.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYNYmtAAoJEEgEtLw/Ve779vQP/RFZKsVt50YSFTZxE8cMhBen
 /ASy/PrcJmd+AbhkyP6fS4M4GkryNu4E2JdlRxu0bbAc7dyRcqCB/YlE7AWVnGVI
 9hlbROKxY+rWbZiYtTnqH4J6HoNheZn0U96GJSfNrwrncF8TNjjgUYfqPnqpcnUI
 L4ApF1XKGFeuOFVJviz2q5C2WKrqajMDmNyiuGSmuZLIE1QkVX3XuHZq1/D5hbix
 /MOkctrNlSkcfmFUBWiXpgY0uNli5QdRzzcqf6vpERxgPukTncixI6R5/pUB9TAp
 4GdFQcHDjTbjPf9sGsqg0wNHMf5Vg/sLcFt18ocWad/ooh2++U/n8/TwnZhXcxZW
 DCCbrWz6l8KoP0ay6BJyzVxLsaqqzlIjPqvVo24VvB8PUpTtpnEDhEQiMPIwBlgi
 HTgVnOzJQAzNAkCPot7i+esDd3tCZnm7ZFTT5GzYp3SdEASZ75ZyBZnfStFrgyCO
 CSNKcLAWA9n7bR6mkgoOyZ2+V5NJycuWnpIAtc1428nvP0vntFnliffwQ+CWRUvo
 vLxLMtsc3MrMl2DvHPG0992Jm2UzaMeYKW/RsPB67mV5+PC5F/e7vM0AU9Ko74aO
 oH1FvV7vBHWLUWNvAmWLhR/tmE9tt5pLTuAsoprBUJ+40sY/o9RLkWO/1sB9169e
 DC5y40qcVHeDWCK/WHkR
 =vTIK
 -----END PGP SIGNATURE-----

Merge tag 'rzg-clock-defs-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into next/dt

Pull "Renesas RZ/G1M and RZ/G1E CPG Core Clock Definitions" from Geert Uytterhoeven:

Shared by clock drivers, and DTS files.

* tag 'rzg-clock-defs-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
  clk: renesas: Add r8a7745 CPG Core Clock Definitions
  clk: renesas: Add r8a7743 CPG Core Clock Definitions
2016-11-30 16:43:10 +01:00
Arnd Bergmann
d319fc6dc1 Renesas ARM Based SoC r8a7745 SYSC Driver Updates for v4.10
* Add support for the r8a7745 SoC to rcar-sysc
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJYNfAfAAoJENfPZGlqN0++t14P/RukycPu2VgJ+F3G+OJoD2WS
 ltEYrhhZxIL9cjyLmiA7Mj7Ig9dMtzmiBC0W3HY5zvZN2OiOrzmNykfFdu9UN8rX
 iMZ6lDrq7o+Qsm1Q4Ab2miatqOqM7JPSacJPixLZFpvs6T79CCRMYaEeIB8AYD3O
 ij/tRDtxdvfY97iy5la9XvtA/63EmP6DZ2SxfqPXd6W0GaBg+QKBOLlcCR0yDrKh
 NosHdbiAbMapBSPbsnbhKLebpnPw159iu7VA73JbsrsFZ9IDRkwoA+wcgEEWnF8C
 b9S31TAglhL04AysUowlHjhEOU2hWPcF8rm3lisDghoUC6Rb/3gCPII+KnU6d5Z4
 QNCbY6IlWqya9wR3kavHmJHOowGt/LqrmLCnJSoTTbKgo6xPxN3kis6oRo2sY9w1
 KUJWgt9vfQ/H6ik2epkMg7sQbkBcsONUDUgVhFyaAqTKEgeIz5OggfNsYkQYYT37
 qlQkLgKweKYJmmr/ilCeVdmkdhPegII8aiYWdwb8N2cUY4I0nyUwnE+v9cdPRhxr
 LpONUZV+GtCz8O/Y2XtjxwhYoYUtHbUzSax+aw4qtBBmdyKcaQ1VIyn27gfofmht
 Q3itzk/eGp0GgnsadknYK9eOvWWjPf07/jvYgSVfL6rWGR+4/vcEht/kU+O9dnpP
 HMZ6/PrbmYoxWkY49sH7
 =pOb+
 -----END PGP SIGNATURE-----

Merge tag 'renesas-r8a7745-sysc-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers

Pull "Renesas ARM Based SoC r8a7745 SYSC Driver Updates for v4.10" from Simon Horman:

* Add support for the r8a7745 SoC to rcar-sysc

* tag 'renesas-r8a7745-sysc-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  soc: renesas: rcar-sysc: add R8A7745 support
  ARM: shmobile: r8a7745: add power domain index macros

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2016-11-30 16:39:48 +01:00
Sargun Dhillon
1379fd3c42 samples: bpf: Refactor test_cgrp2_attach -- use getopt, and add mode
This patch modifies test_cgrp2_attach to use getopt so we can use standard
command line parsing.

It also adds an option to run the program in detach only mode. This does
not attach a new filter at the cgroup, but only runs the detach command.

Lastly, it changes the attach code to not detach and then attach. It relies
on the 'hotswap' behaviour of CGroup BPF programs to be able to change
in-place. If detach-then-attach behaviour needs to be tested, the example
can be run in detach only mode prior to attachment.

Signed-off-by: Sargun Dhillon <sargun@sargun.me>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30 10:29:48 -05:00
Philippe Reynes
377fa64f19 net: brocade: bna: use new api ethtool_{get|set}_link_ksettings
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.

Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
Acked-by: Rasesh Mody <Rasesh.Mody@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30 10:29:02 -05:00
Daniel Borkmann
85de8576a0 bpf, xdp: allow to pass flags to dev_change_xdp_fd
Add an IFLA_XDP_FLAGS attribute that can be passed for setting up
XDP along with IFLA_XDP_FD, which eventually allows user space to
implement typical add/replace/delete logic for programs. Right now,
calling into dev_change_xdp_fd() will always replace previous programs.

When passed XDP_FLAGS_UPDATE_IF_NOEXIST, we can handle this more
graceful when requested by returning -EBUSY in case we try to
attach a new program, but we find that another one is already
attached. This will be used by upcoming front-end for iproute2 as
well.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30 10:27:20 -05:00
David S. Miller
0f29f05bd7 Merge branch 'broadcom-phy-internal-counters'
Florian Fainelli says:

====================
net: phy: broadcom: Support for PHY counters

This patch series adds support for reading the Broadcom PHYs internal counters.

Changes in v3:

- fixed the allocation of priv->stats in bcm7xxx

Changes in v2:

- fixed modular build reported by kbuild

- constify array of stats
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30 10:22:28 -05:00
Florian Fainelli
b23ce9e8b3 net: phy: bcm7xxx: Plug in support for reading PHY error counters
Broadcom BCM7xxx internal PHYs can leverage the Broadcom PHY library
module PHY error counters helper functions, just implement the
appropriate PHY driver function calls to do so. We need to allocate some
storage space for our PHY statistics, and provide it to the Broadcom PHY
library, so do this in a specific probe function, and slightly wrap the
get_stats function call.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30 10:22:27 -05:00
Florian Fainelli
820ee17b8d net: phy: broadcom: Add support code for reading PHY counters
Broadcom PHYs expose a number of PHY error counters: receive errors,
false carrier sense, SerDes BER count, local and remote receive errors.
Add support code to allow retrieving these error counters. Since the
Broadcom PHY library code is used by several drivers, make it possible
for them to specify the storage for the software copy of the statistics.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30 10:22:27 -05:00
Edward Cree
5a6681e22c sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver
Rationale: The differences between Falcon and Siena are in many ways larger
 than those between Siena and EF10 (despite Siena being nominally "Falcon-
 architecture"); for instance, Falcon has no MCPU, so there is no MCDI.
 Removing Falcon support from the sfc driver should simplify the latter,
 and avoid the possibility of Falcon support being broken by changes to sfc
 (which are rarely if ever tested on Falcon, it being end-of-lifed hardware).

The sfc-falcon driver created in this changeset is essentially a copy of the
 sfc driver, but with Siena- and EF10-specific code, including MCDI, removed
 and with the "efx_" identifier prefix changed to "ef4_" (for "EFX 4000-
 series") to avoid collisions when both drivers are built-in.

This changeset removes Falcon from the sfc driver's PCI ID table; then in
 sfc I've removed obvious Falcon-related code: I removed the Falcon NIC
 functions, Falcon PHY code, and EFX_REV_FALCON_*, then fixed up everything
 that referenced them.

Also, increment minor version of both drivers (to 4.1).

For now, CONFIG_SFC selects CONFIG_SFC_FALCON, so that updating old configs
 doesn't cause Falcon support to disappear; but that should be undone at
 some point in the future.

Signed-off-by: Edward Cree <ecree@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30 10:16:58 -05:00
Yegor Yefremov
6bb10c2bc6 cpsw: ethtool: add support for nway reset
This patch adds support for ethtool's '-r' command. Restarting
N-WAY negotiation can be useful to activate newly changed EEE
settings etc.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30 10:13:30 -05:00
David S. Miller
6d5274eba4 Merge branch 'tcp-sender-chronographs'
Yuchung Cheng says:

====================
tcp: sender chronographs instrumentation

This patch set provides instrumentation on TCP sender limitations.
While developing the BBR congestion control, we noticed that TCP
sending process is often limited by factors unrelated to congestion
control: insufficient sender buffer and/or insufficient receive
window/buffer to saturate the network bandwidth. Unfortunately these
limits are not visible to the users and often the poor performance
is attributed to the congestion control of choice.

Thie patch aims to help users get the high level understanding of
where sending process is limited by, similar to the TCP_INFO design.
It is not to replace detailed kernel tracing and instrumentation
facilities.

In addition this patch set provide a new option to the timestamping
work to instrument these limits on application data unit. For exampe,
one can use SO_TIMESTAMPING and this patch set to measure the how
long a particular HTTP response is limited by small receive window.

Patch set was initially written by Francis Yan then polished
by Yuchung Cheng, with lots of help from Eric Dumazet and Soheil
Hassas Yeganeh.
====================

Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30 10:04:32 -05:00
Francis Yan
1c885808e4 tcp: SOF_TIMESTAMPING_OPT_STATS option for SO_TIMESTAMPING
This patch exports the sender chronograph stats via the socket
SO_TIMESTAMPING channel. Currently we can instrument how long a
particular application unit of data was queued in TCP by tracking
SOF_TIMESTAMPING_TX_SOFTWARE and SOF_TIMESTAMPING_TX_SCHED. Having
these sender chronograph stats exported simultaneously along with
these timestamps allow further breaking down the various sender
limitation.  For example, a video server can tell if a particular
chunk of video on a connection takes a long time to deliver because
TCP was experiencing small receive window. It is not possible to
tell before this patch without packet traces.

To prepare these stats, the user needs to set
SOF_TIMESTAMPING_OPT_STATS and SOF_TIMESTAMPING_OPT_TSONLY flags
while requesting other SOF_TIMESTAMPING TX timestamps. When the
timestamps are available in the error queue, the stats are returned
in a separate control message of type SCM_TIMESTAMPING_OPT_STATS,
in a list of TLVs (struct nlattr) of types: TCP_NLA_BUSY_TIME,
TCP_NLA_RWND_LIMITED, TCP_NLA_SNDBUF_LIMITED. Unit is microsecond.

Signed-off-by: Francis Yan <francisyyan@gmail.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30 10:04:25 -05:00
Francis Yan
efd9017416 tcp: export sender limits chronographs to TCP_INFO
This patch exports all the sender chronograph measurements collected
in the previous patches to TCP_INFO interface. Note that busy time
exported includes all the other sending limits (rwnd-limited,
sndbuf-limited). Internally the time unit is jiffy but externally
the measurements are in microseconds for future extensions.

Signed-off-by: Francis Yan <francisyyan@gmail.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30 10:04:25 -05:00
Francis Yan
b0f71bd3e1 tcp: instrument how long TCP is limited by insufficient send buffer
This patch measures the amount of time when TCP runs out of new data
to send to the network due to insufficient send buffer, while TCP
is still busy delivering (i.e. write queue is not empty). The goal
is to indicate either the send buffer autotuning or user SO_SNDBUF
setting has resulted network under-utilization.

The measurement starts conservatively by checking various conditions
to minimize false claims (i.e. under-estimation is more likely).
The measurement stops when the SOCK_NOSPACE flag is cleared. But it
does not account the time elapsed till the next application write.
Also the measurement only starts if the sender is still busy sending
data, s.t. the limit accounted is part of the total busy time.

Signed-off-by: Francis Yan <francisyyan@gmail.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30 10:04:24 -05:00
Francis Yan
5615f88614 tcp: instrument how long TCP is limited by receive window
This patch measures the total time when the TCP stops sending because
the receiver's advertised window is not large enough. Note that
once the limit is lifted we are likely in the busy status if we
have data pending.

Signed-off-by: Francis Yan <francisyyan@gmail.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30 10:04:24 -05:00
Francis Yan
0f87230d1a tcp: instrument how long TCP is busy sending
This patch measures TCP busy time, which is defined as the period
of time when sender has data (or FIN) to send. The time starts when
data is buffered and stops when the write queue is flushed by ACKs
or error events.

Note the busy time does not include SYN time, unless data is
included in SYN (i.e. Fast Open). It does include FIN time even
if the FIN carries no payload. Excluding pure FIN is possible but
would incur one additional test in the fast path, which may not
be worth it.

Signed-off-by: Francis Yan <francisyyan@gmail.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30 10:04:24 -05:00
Francis Yan
05b055e891 tcp: instrument tcp sender limits chronographs
This patch implements the skeleton of the TCP chronograph
instrumentation on sender side limits:

	1) idle (unspec)
	2) busy sending data other than 3-4 below
	3) rwnd-limited
	4) sndbuf-limited

The limits are enumerated 'tcp_chrono'. Since a connection in
theory can idle forever, we do not track the actual length of this
uninteresting idle period. For the rest we track how long the sender
spends in each limit. At any point during the life time of a
connection, the sender must be in one of the four states.

If there are multiple conditions worthy of tracking in a chronograph
then the highest priority enum takes precedence over
the other conditions. So that if something "more interesting"
starts happening, stop the previous chrono and start a new one.

The time unit is jiffy(u32) in order to save space in tcp_sock.
This implies application must sample the stats no longer than every
49 days of 1ms jiffy.

Signed-off-by: Francis Yan <francisyyan@gmail.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30 10:04:24 -05:00
Yegor Yefremov
a090994980 cpsw: ethtool: add support for getting/setting EEE registers
Add the ability to query and set Energy Efficient Ethernet parameters
via ethtool for applicable devices.

This patch doesn't activate full EEE support in cpsw driver, but it
enables reading and writing EEE advertising settings. This way one
can disable advertising EEE for certain speeds.

Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Acked-by: Rami Rosen <roszenrami@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-11-30 10:04:10 -05:00