Commit graph

661,541 commits

Author SHA1 Message Date
Ido Yariv
bd768e1466 KVM: x86: fix wbinvd_dirty_mask use-after-free
vcpu->arch.wbinvd_dirty_mask may still be used after freeing it,
corrupting memory. For example, the following call trace may set a bit
in an already freed cpu mask:
    kvm_arch_vcpu_load
    vcpu_load
    vmx_free_vcpu_nested
    vmx_free_vcpu
    kvm_arch_vcpu_free

Fix this by deferring freeing of wbinvd_dirty_mask.

Cc: stable@vger.kernel.org
Signed-off-by: Ido Yariv <ido@wizery.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-10-28 11:35:21 +02:00
Ander Conselvan de Oliveira
ed37892e6d drm/i915: Address broxton phy registers based on phy and channel number
The port registers related to the phys in broxton map to different
channels and specific phys. Make that mapping explicit.

v2: Pass enum dpio_phy to macros instead of mmio base. (Imre)

v3: Fix typo in macros. (Imre)

v4: Also change variables from u32 to enum dpio_phy. (Imre)
    Remove leftovers from previous version. (Imre)

v5: Actually git add the changes.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1476863940-6019-1-git-send-email-ander.conselvan.de.oliveira@intel.com
2016-10-28 12:25:24 +03:00
Ander Conselvan de Oliveira
e7583f7b10 drm/i915: Add location of the Rcomp resistor to bxt_ddi_phy_info
Use struct bxt_ddi_phy_info to hold information of where the Rcomp
resistor is located, instead of hard coding it in the init sequence.

Note that this moves the enabling of the phy with the Rcomp resistor out
of the power well enable code. That should be safe since
bxt_ddi_phy_init() is called while the power domains lock is held, and
that is the only way that function gets called, so there is no
possibility of a concurrent phy enable caused by a power domain get
call.

v2: Replace comment about lock with lockdep_assert_held()  (Imre)

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/62d209950ad48484564f3e793cf247cf62572a39.1475770848.git-series.ander.conselvan.de.oliveira@intel.com
2016-10-28 12:25:03 +03:00
Ander Conselvan de Oliveira
842d416654 drm/i915: Create a struct to hold information about the broxton phys
Information about which phy is dual channel is hardcoded in the phy init
sequence. Split that to a separate struct so the init sequence is more
generic.

v2: Restore mangled part that ended up in following patch. (Imre)

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/9102f4c984044126057e4fdd1b91a615ff25fae6.1475770848.git-series.ander.conselvan.de.oliveira@intel.com
2016-10-28 12:24:51 +03:00
Ander Conselvan de Oliveira
b6e08203cc drm/i915: Move broxton vswing sequence to intel_dpio_phy.c
The vswing sequence is related to the DPIO phy, so move it closer to the
rest of DPIO phy related code.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/59aa5c85a115c5cbed81e793f20cd7b9f8de694b.1475770848.git-series.ander.conselvan.de.oliveira@intel.com
2016-10-28 12:24:45 +03:00
Ander Conselvan de Oliveira
f38861b814 drm/i915: Move DPIO phy documentation section to intel_dpio_phy.c
Move the DPIO phy documentation section to intel_dpio_phy.c, since that
is a more suitable place now that there is a source file dedicated for
those phys.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/55a2d38c15c06a8c5bce498b28decc03948f0224.1475770848.git-series.ander.conselvan.de.oliveira@intel.com
2016-10-28 12:24:37 +03:00
Ander Conselvan de Oliveira
47a6bc61b8 drm/i915: Move broxton phy code to intel_dpio_phy.c
The phy in broxton is also a dpio phy, similar to cherryview but with
programming through MMIO. So move the code together with the other
similar phys.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/d611de6d256593cf904172db7ff27f164480c228.1475770848.git-series.ander.conselvan.de.oliveira@intel.com
2016-10-28 12:24:01 +03:00
Ander Conselvan de Oliveira
b284eedaf7 drm/i915: Pass lane count to bxt_ddi_phy_calc_lane_optmin_mask()
Pass lane count to bxt_ddi_phy_calc_lane_optmin_mask() instead of having
it extract that number from a pipe_config to decouple the phy code from
intel_crtc_state.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/a4977e0207e594953c4f9d1b5f2ef972a8679e74.1475770848.git-series.ander.conselvan.de.oliveira@intel.com
2016-10-28 12:23:53 +03:00
Ander Conselvan de Oliveira
362624c9ba drm/i915: Explicitly map broxton DPIO power wells to phys
The mapping from the BXT_DPIO_CMN_* power wells to their respective phys
required a detour implemented in the bxt_power_well_to_phy() function.
Instead, embed that information directly into the power_well struct, by
resurrecting the data field.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/7fe97582fa08c7340ce6a3b6b0ea3e72a73182d7.1475770848.git-series.ander.conselvan.de.oliveira@intel.com
2016-10-28 12:23:45 +03:00
Ander Conselvan de Oliveira
01c3faa70b drm/i915: Rename struct i915_power_well field data to id
Calling it data seems to imply arbitrary data can be associated with the
power well. However, that field is used for look ups and expected to be
unique, so rename it.

Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/f3916c3c5bfa793b0fc870fd44007a3ff425194d.1475770848.git-series.ander.conselvan.de.oliveira@intel.com
2016-10-28 12:23:30 +03:00
Imre Palik
f92b760414 perf/x86/intel: Honour the CPUID for number of fixed counters in hypervisors
perf doesn't seem to honour the number of fixed counters specified by CPUID
leaf 0xa. It always assumes that Intel CPUs have at least 3 fixed counters.

So if some of the fixed counters are masked out by the hypervisor, it still
tries to check/set them.

This patch makes perf behave nicer when the kernel is running under a
hypervisor that doesn't expose all the counters.

This patch contains some ideas from Matt Wilson.

Signed-off-by: Imre Palik <imrep@amazon.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Kozyrev <alexander.kozyrev@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Artyom Kuanbekov <artyom.kuanbekov@intel.com>
Cc: David Carrillo-Cisneros <davidcc@google.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Wilson <msw@amazon.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1477037939-15605-1-git-send-email-imrep.amz@gmail.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-28 11:06:25 +02:00
Jiri Olsa
5aab90ce1e perf/powerpc: Don't call perf_event_disable() from atomic context
The trinity syscall fuzzer triggered following WARN() on powerpc:

  WARNING: CPU: 9 PID: 2998 at arch/powerpc/kernel/hw_breakpoint.c:278
  ...
  NIP [c00000000093aedc] .hw_breakpoint_handler+0x28c/0x2b0
  LR [c00000000093aed8] .hw_breakpoint_handler+0x288/0x2b0
  Call Trace:
  [c0000002f7933580] [c00000000093aed8] .hw_breakpoint_handler+0x288/0x2b0 (unreliable)
  [c0000002f7933630] [c0000000000f671c] .notifier_call_chain+0x7c/0xf0
  [c0000002f79336d0] [c0000000000f6abc] .__atomic_notifier_call_chain+0xbc/0x1c0
  [c0000002f7933780] [c0000000000f6c40] .notify_die+0x70/0xd0
  [c0000002f7933820] [c00000000001a74c] .do_break+0x4c/0x100
  [c0000002f7933920] [c0000000000089fc] handle_dabr_fault+0x14/0x48

Followed by a lockdep warning:

  ===============================
  [ INFO: suspicious RCU usage. ]
  4.8.0-rc5+ #7 Tainted: G        W
  -------------------------------
  ./include/linux/rcupdate.h:556 Illegal context switch in RCU read-side critical section!

  other info that might help us debug this:

  rcu_scheduler_active = 1, debug_locks = 0
  2 locks held by ls/2998:
   #0:  (rcu_read_lock){......}, at: [<c0000000000f6a00>] .__atomic_notifier_call_chain+0x0/0x1c0
   #1:  (rcu_read_lock){......}, at: [<c00000000093ac50>] .hw_breakpoint_handler+0x0/0x2b0

  stack backtrace:
  CPU: 9 PID: 2998 Comm: ls Tainted: G        W       4.8.0-rc5+ #7
  Call Trace:
  [c0000002f7933150] [c00000000094b1f8] .dump_stack+0xe0/0x14c (unreliable)
  [c0000002f79331e0] [c00000000013c468] .lockdep_rcu_suspicious+0x138/0x180
  [c0000002f7933270] [c0000000001005d8] .___might_sleep+0x278/0x2e0
  [c0000002f7933300] [c000000000935584] .mutex_lock_nested+0x64/0x5a0
  [c0000002f7933410] [c00000000023084c] .perf_event_ctx_lock_nested+0x16c/0x380
  [c0000002f7933500] [c000000000230a80] .perf_event_disable+0x20/0x60
  [c0000002f7933580] [c00000000093aeec] .hw_breakpoint_handler+0x29c/0x2b0
  [c0000002f7933630] [c0000000000f671c] .notifier_call_chain+0x7c/0xf0
  [c0000002f79336d0] [c0000000000f6abc] .__atomic_notifier_call_chain+0xbc/0x1c0
  [c0000002f7933780] [c0000000000f6c40] .notify_die+0x70/0xd0
  [c0000002f7933820] [c00000000001a74c] .do_break+0x4c/0x100
  [c0000002f7933920] [c0000000000089fc] handle_dabr_fault+0x14/0x48

While it looks like the first WARN() is probably valid, the other one is
triggered by disabling event via perf_event_disable() from atomic context.

The event is disabled here in case we were not able to emulate
the instruction that hit the breakpoint. By disabling the event
we unschedule the event and make sure it's not scheduled back.

But we can't call perf_event_disable() from atomic context, instead
we need to use the event's pending_disable irq_work method to disable it.

Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Neuling <mikey@neuling.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20161026094824.GA21397@krava
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-28 11:06:25 +02:00
Jiri Olsa
0933840acf perf/core: Protect PMU device removal with a 'pmu_bus_running' check, to fix CONFIG_DEBUG_TEST_DRIVER_REMOVE=y kernel panic
CAI Qian reported a crash in the PMU uncore device removal code,
enabled by the CONFIG_DEBUG_TEST_DRIVER_REMOVE=y option:

  https://marc.info/?l=linux-kernel&m=147688837328451

The reason for the crash is that perf_pmu_unregister() tries to remove
a PMU device which is not added at this point. We add PMU devices
only after pmu_bus is registered, which happens in the
perf_event_sysfs_init() call and sets the 'pmu_bus_running' flag.

The fix is to get the 'pmu_bus_running' flag state at the point
the PMU is taken out of the PMU list and remove the device
later only if it's set.

Reported-by: CAI Qian <caiqian@redhat.com>
Tested-by: CAI Qian <caiqian@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20161020111011.GA13361@krava
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-28 11:06:25 +02:00
Borislav Petkov
1c27f646b1 x86/microcode/AMD: Fix more fallout from CONFIG_RANDOMIZE_MEMORY=y
We needed the physical address of the container in order to compute the
offset within the relocated ramdisk. And we did this by doing __pa() on
the virtual address.

However, __pa() does checks whether the physical address is within
PAGE_OFFSET and __START_KERNEL_map - see __phys_addr() - which fail
if we have CONFIG_RANDOMIZE_MEMORY enabled: we feed a virtual address
which *doesn't* have the randomization offset into a function which uses
PAGE_OFFSET which *does* have that offset.

This makes this check fire:

	VIRTUAL_BUG_ON((x > y) || !phys_addr_valid(x));
			^^^^^^

due to the randomization offset.

The fix is as simple as using __pa_nodebug() because we do that
randomization offset accounting later in that function ourselves.

Reported-by: Bob Peterson <rpeterso@redhat.com>
Tested-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andreas Gruenbacher <agruenba@redhat.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm <linux-mm@kvack.org>
Cc: stable@vger.kernel.org # 4.9
Link: http://lkml.kernel.org/r/20161027123623.j2jri5bandimboff@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-28 10:29:59 +02:00
Arnd Bergmann
8ff0513bdc mtd: mtk: avoid warning in mtk_ecc_encode
When building with -Wmaybe-uninitialized, gcc produces a silly false positive
warning for the mtk_ecc_encode function:

drivers/mtd/nand/mtk_ecc.c: In function 'mtk_ecc_encode':
drivers/mtd/nand/mtk_ecc.c:402:15: error: 'val' may be used uninitialized in this function [-Werror=maybe-uninitialized]

The function for some reason contains a double byte swap on big-endian
builds to get the OOB data into the correct order again, and is written
in a slightly confusing way.

Using a simple memcpy32_fromio() to read the data simplifies it a lot
so it becomes more readable and produces no warning. However, the
output might not have 32-bit alignment, so we have to use another
memcpy to avoid taking alignment faults or writing beyond the end
of the array.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: RogerCC Lin <rogercc.lin@mediatek.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-10-28 10:21:23 +02:00
Jan Höppner
9f9d53e5bd s390/dasd: Fix locking issue when changing RO attribute
The function dasd_ro_store() calls set_disk_ro() to set the device in
question read-only. Since set_disk_ro() might sleep, we can't call it
while holding a lock. However, we also can't simply check if the device,
block, and gdp references are valid before we call set_disk_ro() because
an offline processing might have been started in the meanwhile which
will destroy those references.

In order to reliably call set_disk_ro() we have to ensure several
things:

- Still check validity of the mentioned references but additionally
  check if offline processing is running and bail out accordingly. Also,
  do this while holding the device lock.
- To ensure that the block device is still safe after the lock, increase
  the open_count while still holding the device lock.

Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-10-28 10:09:04 +02:00
Jan Höppner
9de67725c8 s390/dasd: Fix locking issue when changing EER attribute
The reference to a device in question may get lost when the extended
error reporting (EER) attribute is being enabled/disabled while the
device is set offline at the same time. This is due to missing
refcounting and incorrect locking. Fix this by the following:

- In dasd_eer_store() get the device directly and handle the refcount
  accordingly.
- Move the lock in dasd_eer_enable() up so we can ensure safe
  processing.
- Check if the device is being set offline and return with -EBUSY if so.
- While at it, change the return code from -EPERM to -EMEDIUMTYPE as
  suggested by a FIXME, since that is what we're actually checking.

Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-10-28 10:09:04 +02:00
Jan Höppner
0f57c97f24 s390/dasd: Eliminate race condition in dasd_generic_set_offline()
Before we set a device offline, the open_count for the block device is
checked and certain flags are checked and set as well.
However, this is all done without holding any lock. Potentially, if the
open_count was checked but the DASD_FLAG_OFFLINE wasn't set yet, a
different process might want to increase the open_count depending on
whether DASD_FLAG_OFFLINE is set or not in the meanwhile.

This is quite racy and can lead to the loss of the device for that
process and subsequently lead to a panic.

Fix this by checking the open_count and setting the offline flags while
holding the ccwdev lock.

Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-10-28 10:09:04 +02:00
Jan Höppner
1081f3a70b s390/dasd: Make use of dasd_set_feature() more often
When setting certain attributes, we actually set the according feature
flag. Do this by using dasd_set_feature() at a few occurrences and
remove duplicate code.

In dasd_set_feature() dasd_find_busid() is used to retrieve the devmap
for the device in question. Combined with the change above, this would
require the device to be set online at least once so that a devmap is
being created. Change that by using dasd_devmap_from_cdev() instead,
which uses dasd_find_busid() first and will create a devmap accordingly
if there is none yet.

Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-10-28 10:09:03 +02:00
Jan Höppner
ce7a788f4d s390/dasd: Replace simple_strtoul with kstrtouint
simple_strtoul() has been marked obsolete for quite some time now.
Replace a few last occurrences with kstrtouint().

Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-10-28 10:09:03 +02:00
Dong Jia Shi
8139d8526c s390/cio: clean up DEV_STATE_SENSE_PGID
Clean up DEV_STATE_SENSE_PGID related code, since it's not
used anymore. Everything related to path verification is
handled within DEV_STATE_VERIFY.

Signed-off-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com>
Acked-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-10-28 10:09:03 +02:00
Martin Schwidefsky
75c7b6f3f6 s390/time: steer clocksource on STP sync events
On STP sync events the TOD clock will jump in time, either forward or
backward. The TOD clocksource claims to be continuous but in case of
an STP sync with a negative offset it is not.

Subtract the offset injected by the STP sync check from the result of
the TOD clocksource to make it continuous again. Add code to drift the
offset towards zero with a fixed rate, steering 1 second in ~9 hours.

Suggested-by: David Hildenbrand <dahi@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-10-28 10:09:02 +02:00
Martin Schwidefsky
2ace06ec0d s390/time: adjust last_update_clock at clock synchronization
The last_update_clock time stamp in the lowcore should be adjusted by
the TOD clock delta that is created by the clock synchronization.
Otherwise the calculation of the steal time will be incorrect.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-10-28 10:09:02 +02:00
Martin Schwidefsky
b1c0854d16 s390/time: refactor clock sync
Merge clock_sync_cpu into stp_sync_clock and split out the update
of the global and per-CPU clock fields into clock_sync_global
and clock_sync_local.

Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-10-28 10:09:02 +02:00
Jan Höppner
62ba6f85ee s390/dasd: Define often used variable
block->request_queue is used many times in dasd_setup_queue. Define a
separate variable to increase readability a bit and to make it better
reusable.

Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-10-28 10:09:01 +02:00
Jan Höppner
5303e6578f s390/dasd: Make setting queue_max_segments more explicit
Currently the block queue value max_segments is set to -1L, which
is then implicitly casted to unsigned short in blk_queue_max_segments.
This results in 65535 (64k) max_segments.

Even though the resulting value is correct, setting it implicitly using
-1L is rather confusing. Set the value explicitly using the USHRT_MAX
macro instead.

Reviewed-by: Stefan Haberland <sth@linux.vnet.ibm.com>
Signed-off-by: Jan Höppner <hoeppner@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-10-28 10:09:01 +02:00
Michael Holzheu
237d6e6884 s390/hypfs: Use get_free_page() instead of kmalloc to ensure page alignment
Since commit d86bd1bece ("mm/slub: support left redzone") it is no longer
guaranteed that kmalloc(PAGE_SIZE) returns page aligned memory.

After the above commit we get an error for diag224 because aligned
memory is required. This leads to the following user visible error:

 # mount none -t s390_hypfs /sys/hypervisor/
 mount: unknown filesystem type 's390_hypfs'

 # dmesg | grep hypfs
 hypfs.cccfb8: The hardware system does not provide all functions
               required by hypfs
 hypfs.7a79f0: Initialization of hypfs failed with rc=-61

Fix this problem and use get_free_page() instead of kmalloc() to get
correctly aligned memory.

Cc: stable@vger.kernel.org # v3.6+
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2016-10-28 10:08:58 +02:00
Boris Brezillon
73f907fd5f mtd: nand: Fix data interface configuration logic
When changing from one data interface setting to another, one has to
ensure a specific sequence which is described in the ONFI spec.

One of these constraints is that the CE line has go high after a reset
before a command can be sent with the new data interface setting, which
is not guaranteed by the current implementation.

Rework the nand_reset() function and all the call sites to make sure the
CE line is asserted and released when required.

Also make sure to actually apply the new data interface setting on the
first die.

Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Fixes: d8e725dd83 ("mtd: nand: automate NAND timings selection")
Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
2016-10-28 09:58:36 +02:00
Fabio Estevam
ce93bedb5e mtd: nand: gpmi: disable the clocks on errors
We should disable the previously enabled GPMI clocks in the error paths.

Also, when gpmi_enable_clk() fails simply return the error
code immediately rather than jumping to to the 'err_out' label.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Acked-by: Han Xu <han.xu@nxp.com>
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-10-28 09:58:05 +02:00
Daniel Vetter
96583ddbec Merge remote-tracking branch 'airlied/drm-next' into drm-intel-next-queued
Backmerge latest drm-next to pull in the s/fence/dma_fence/ rework,
needed before we merge more i915 fencing patches.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
2016-10-28 09:14:08 +02:00
Greg Kroah-Hartman
463e2a2b89 serial: fsl_lpuart: remove build warning
commit 2a41bc2a2b ("tty: serial: fsl_lpuart: add polled console
functions") caused a build warning about an unused variable, so fix it.

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Cc: Nicolae Rosia <nicolae_rosia@mentor.com>
Cc: Stefan Golinschi <stefan.golinschi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-28 02:47:35 -04:00
Rafael J. Wysocki
4bdb35506b driver core: Add a wrapper around __device_release_driver()
Add an internal wrapper around __device_release_driver() that will
acquire device locks and do the necessary checks before calling it.

The next patch will make use of it.

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-28 02:42:26 -04:00
Arnd Bergmann
7f847dd317 debugfs: improve DEFINE_DEBUGFS_ATTRIBUTE for !CONFIG_DEBUG_FS
The slp_s0_residency_usec debugfs file currently uses
DEFINE_DEBUGFS_ATTRIBUTE(), but that macro cannot really be used to
define files outside of the debugfs code, as it has no reference to
the get/set functions if CONFIG_DEBUG_FS is not defined:

drivers/platform/x86/intel_pmc_core.c:80:12: error: ‘pmc_core_dev_state_get’ defined but not used [-Werror=unused-function]

This fixes the macro to always contain the reference, and instead rely
on the stubbed-out debugfs_create_file to not actually refer to
its arguments so the compiler can still drop the reference.
This works because the attribute definition is always 'static',
and the dead-code removal silently drops all static symbols
that are not used.

Fixes: c646880814 ("debugfs: add support for self-protecting attribute file fops")
Fixes: df2294fb64 ("intel_pmc_core: Convert to DEFINE_DEBUGFS_ATTRIBUTE")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[nicstange@gmail.com: Add dummy implementations of debugfs_attr_read() and
  debugfs_attr_write() in order to protect against possibly broken dead
  code elimination and to improve readability.
  Correct CONFIG_DEBUGFS_FS -> CONFIG_DEBUG_FS typo in changelog.]
Signed-off-by: Nicolai Stange <nicstange@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-28 02:42:19 -04:00
Julia Lawall
edbbf994bd kobject: improve function-level documentation
In the first case, rename the second variable to correspond to the name
found in the function parameter list.

In the remaining cases, reorder the variables to correspond to their order
in the parameter list.

Issue detected using Coccinelle (http://coccinelle.lip6.fr/)

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-10-28 02:42:10 -04:00
Josh Poimboeuf
24d86f5909 x86/unwind: Ensure stack grows down
Add a sanity check to ensure the stack only grows down, and print a
warning if the check fails.

Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20161027131058.tpdffwlqipv7pcd6@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-28 08:16:45 +02:00
Dmitry Safonov
67dece7d4c x86/vdso: Set vDSO pointer only after success
Those pointers were initialized before call to _install_special_mapping()
after the commit:

  f7b6eb3fa0 ("x86: Set context.vdso before installing the mapping")

This is not required anymore as special mappings have their vma name and
don't use arch_vma_name() after commit:

  a62c34bd2a ("x86, mm: Improve _install_special_mapping and fix x86 vdso naming")

So, this way to init looks less entangled.

I even belive that we can remove NULL initializers:

 - on failure load_elf_binary() will not start a new thread;
 - arch_prctl will have the same pointers as before syscall.

Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: 0x7f454c46@gmail.com
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Cc: oleg@redhat.com
Link: http://lkml.kernel.org/r/20161027141516.28447-3-dsafonov@virtuozzo.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-28 08:15:55 +02:00
Dmitry Safonov
a01aa6c9f4 x86/prctl/uapi: Remove #ifdef for CHECKPOINT_RESTORE
As userspace knows nothing about kernel config, thus #ifdefs
around ABI prctl constants makes them invisible to userspace.

Let it be clean'n'simple: remove #ifdefs.

If kernel has CONFIG_CHECKPOINT_RESTORE disabled, sys_prctl()
will return -EINVAL for those prctls.

Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Dmitry Safonov <dsafonov@virtuozzo.com>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: 0x7f454c46@gmail.com
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mm@kvack.org
Cc: oleg@redhat.com
Fixes: 2eefd87896 ("x86/arch_prctl/vdso: Add ARCH_MAP_VDSO_*")
Link: http://lkml.kernel.org/r/20161027141516.28447-2-dsafonov@virtuozzo.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2016-10-28 08:15:55 +02:00
Dave Airlie
fb422950c6 Merge branch 'linux-4.9' of git://github.com/skeggsb/linux into drm-next
Karol's work which greatly improves volt/clock changes on a
heap of boards, nothing too exciting beyond a random collection of fixes.

* 'linux-4.9' of git://github.com/skeggsb/linux: (33 commits)
  drm/nouveau/fb/nv50: defer DMA mapping of scratch page to oneinit() hook
  drm/nouveau/fb/gf100: defer DMA mapping of scratch page to oneinit() hook
  drm/nouveau/pci: set streaming DMA mask early
  drm/nouveau/kms: add Maxwell to backlight initialization
  drm/nouveau/bar/nv50: fix bar2 vm size
  drm/nouveau/disp: remove unused function in sorg94.c
  drm/nouveau/volt: use kernel's 64-bit signed division function
  drm/nouveau/core: add missing header dependencies
  drm/nouveau/gr/nv3x: add 0x0597 kelvin 3d class support
  drm/nouveau/drm/nouveau: add a LED driver for the NVIDIA logo
  drm/nouveau/fb/ram: Use Kepler implementation on Maxwell
  drm/nouveau/volt: Make use of cvb coefficients
  drm/nouveau/volt/gf100-: Add speedo
  drm/nouveau/volt: Add implementation for gf100
  drm/nouveau/bios/vmap: unk0 field is the mode
  drm/nouveau/volt: Don't require perfect fit
  drm/nouveau/clk: Allow boosting only when NvBoost is set
  drm/nouveau/bios: Add parsing of VPSTATE table
  drm/nouveau/clk: Respect voltage limits in nvkm_cstate_prog
  drm/nouveau/clk: Fixup cstate selection
  ...
2016-10-28 14:24:56 +10:00
Linus Torvalds
14970f204b Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
 "20 fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  drivers/misc/sgi-gru/grumain.c: remove bogus 0x prefix from printk
  cris/arch-v32: cryptocop: print a hex number after a 0x prefix
  ipack: print a hex number after a 0x prefix
  block: DAC960: print a hex number after a 0x prefix
  fs: exofs: print a hex number after a 0x prefix
  lib/genalloc.c: start search from start of chunk
  mm: memcontrol: do not recurse in direct reclaim
  CREDITS: update credit information for Martin Kepplinger
  proc: fix NULL dereference when reading /proc/<pid>/auxv
  mm: kmemleak: ensure that the task stack is not freed during scanning
  lib/stackdepot.c: bump stackdepot capacity from 16MB to 128MB
  latent_entropy: raise CONFIG_FRAME_WARN by default
  kconfig.h: remove config_enabled() macro
  ipc: account for kmem usage on mqueue and msg
  mm/slab: improve performance of gathering slabinfo stats
  mm: page_alloc: use KERN_CONT where appropriate
  mm/list_lru.c: avoid error-path NULL pointer deref
  h8300: fix syscall restarting
  kcov: properly check if we are in an interrupt
  mm/slab: fix kmemcg cache creation delayed issue
2016-10-27 19:58:39 -07:00
Dave Airlie
1cfa126c52 Merge branch 'drm-fixes-4.9' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
Two sets of amdgpu fixes as I missed one set.
* 'drm-fixes-4.9' of git://people.freedesktop.org/~agd5f/linux: (23 commits)
  drm/amd/powerplay: fix bug get wrong evv voltage of Polaris.
  drm/amdgpu/si_dpm: workaround for SI kickers
  drm/radeon/si_dpm: workaround for SI kickers
  drm/amdgpu: fix s3 resume back, uvd dpm randomly can't disable.
  drm/radeon: drop register readback in cayman_cp_int_cntl_setup
  drm/amdgpu/vce3: only enable 3 rings on new enough firmware (v2)
  drm/amdgpu: fix fence slab teardown
  drm/amdgpu: update kernel-doc for some functions
  drm/amdgpu: fix a vm_flush fence leak
  drm/amdgpu: fix sched fence slab teardown
  Revert "drm/radeon: fix DP link training issue with second 4K monitor"
  drm/amdgpu/dpm: flush any thermal work on fini
  drm/amdgpu: cancel reset work on fini
  drm/amd/powerplay: don't give up if DPM is already running
  drm/amd/powerplay: fix static checker warning in process_pptables_v1_0.c
  drm/amdgpu: avoid drm error log during S3 on RHEL7.3
  drm/amdgpu: explicitly set pg_flags for ST
  drm/amdgpu/st: move ATC CG golden init from gfx to mc
  drm/amd/amdgpu: expose max engine and memory clock for powerplay enabled case
  drm/amdgpu: move atom scratch register save/restore to common code
  ...
2016-10-28 12:25:01 +10:00
Dave Airlie
aa72c26c2b Merge tag 'drm-misc-fixes-2016-10-27' of git://anongit.freedesktop.org/git/drm-misc into drm-fixes
Set of drm core fixes.

Hopefully fixes a bug in MST unplugs in fbdev.

* tag 'drm-misc-fixes-2016-10-27' of git://anongit.freedesktop.org/git/drm-misc:
  drm/dp/mst: Check peer device type before attempting EDID read
  drm/dp/mst: Clear port->pdt when tearing down the i2c adapter
  drm/fb-helper: Keep references for the current set of used connectors
  drm: Don't force all planes to be added to the state due to zpos
  drm/fb-helper: Fix connector ref leak on error
  drm/fb-helper: Don't call dirty callback for untouched clips
  drm: Release reference from blob lookup after replacing property
2016-10-28 12:24:14 +10:00
Dimitri Sivanich
8e819101ce drivers/misc/sgi-gru/grumain.c: remove bogus 0x prefix from printk
Would like to have this be a decimal number.

Link: http://lkml.kernel.org/r/20161026134746.GA30169@sgi.com
Signed-off-by: Dimitri Sivanich <sivanich@sgi.com>
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-27 18:43:43 -07:00
Uwe Kleine-König
17a8893956 cris/arch-v32: cryptocop: print a hex number after a 0x prefix
It makes the result hard to interpret correctly if a base 10 number is
prefixed by 0x.  So change to a hex number.

Link: http://lkml.kernel.org/r/20161026125658.25728-6-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Mikael Starvik <starvik@axis.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-27 18:43:43 -07:00
Uwe Kleine-König
9105585d13 ipack: print a hex number after a 0x prefix
It makes the result hard to interpret correctly if a base 10 number is
prefixed by 0x.  So change to a hex number.

Link: http://lkml.kernel.org/r/20161026125658.25728-4-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Cc: Jens Taprogge <jens.taprogge@taprogge.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-27 18:43:43 -07:00
Uwe Kleine-König
ee52c44dee block: DAC960: print a hex number after a 0x prefix
It makes the message hard to interpret correctly if a base 10 number is
prefixed by 0x.  So change to a hex number.

Link: http://lkml.kernel.org/r/20161026125658.25728-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-27 18:43:43 -07:00
Uwe Kleine-König
14f947c87a fs: exofs: print a hex number after a 0x prefix
It makes the message hard to interpret correctly if a base 10 number is
prefixed by 0x.  So change to a hex number.

Link: http://lkml.kernel.org/r/20161026125658.25728-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Boaz Harrosh <ooo@electrozaur.com>
Cc: Benny Halevy <bhalevy@primarydata.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-27 18:43:43 -07:00
Daniel Mentz
62e931fac4 lib/genalloc.c: start search from start of chunk
gen_pool_alloc_algo() iterates over the chunks of a pool trying to find
a contiguous block of memory that satisfies the allocation request.

The shortcut

	if (size > atomic_read(&chunk->avail))
		continue;

makes the loop skip over chunks that do not have enough bytes left to
fulfill the request.  There are two situations, though, where an
allocation might still fail:

(1) The available memory is not contiguous, i.e.  the request cannot
    be fulfilled due to external fragmentation.

(2) A race condition.  Another thread runs the same code concurrently
    and is quicker to grab the available memory.

In those situations, the loop calls pool->algo() to search the entire
chunk, and pool->algo() returns some value that is >= end_bit to
indicate that the search failed.  This return value is then assigned to
start_bit.  The variables start_bit and end_bit describe the range that
should be searched, and this range should be reset for every chunk that
is searched.  Today, the code fails to reset start_bit to 0.  As a
result, prefixes of subsequent chunks are ignored.  Memory allocations
might fail even though there is plenty of room left in these prefixes of
those other chunks.

Fixes: 7f184275aa ("lib, Make gen_pool memory allocator lockless")
Link: http://lkml.kernel.org/r/1477420604-28918-1-git-send-email-danielmentz@google.com
Signed-off-by: Daniel Mentz <danielmentz@google.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-27 18:43:43 -07:00
Johannes Weiner
89a2848381 mm: memcontrol: do not recurse in direct reclaim
On 4.0, we saw a stack corruption from a page fault entering direct
memory cgroup reclaim, calling into btrfs_releasepage(), which then
tried to allocate an extent and recursed back into a kmem charge ad
nauseam:

  [...]
  btrfs_releasepage+0x2c/0x30
  try_to_release_page+0x32/0x50
  shrink_page_list+0x6da/0x7a0
  shrink_inactive_list+0x1e5/0x510
  shrink_lruvec+0x605/0x7f0
  shrink_zone+0xee/0x320
  do_try_to_free_pages+0x174/0x440
  try_to_free_mem_cgroup_pages+0xa7/0x130
  try_charge+0x17b/0x830
  memcg_charge_kmem+0x40/0x80
  new_slab+0x2d9/0x5a0
  __slab_alloc+0x2fd/0x44f
  kmem_cache_alloc+0x193/0x1e0
  alloc_extent_state+0x21/0xc0
  __clear_extent_bit+0x2b5/0x400
  try_release_extent_mapping+0x1a3/0x220
  __btrfs_releasepage+0x31/0x70
  btrfs_releasepage+0x2c/0x30
  try_to_release_page+0x32/0x50
  shrink_page_list+0x6da/0x7a0
  shrink_inactive_list+0x1e5/0x510
  shrink_lruvec+0x605/0x7f0
  shrink_zone+0xee/0x320
  do_try_to_free_pages+0x174/0x440
  try_to_free_mem_cgroup_pages+0xa7/0x130
  try_charge+0x17b/0x830
  mem_cgroup_try_charge+0x65/0x1c0
  handle_mm_fault+0x117f/0x1510
  __do_page_fault+0x177/0x420
  do_page_fault+0xc/0x10
  page_fault+0x22/0x30

On later kernels, kmem charging is opt-in rather than opt-out, and that
particular kmem allocation in btrfs_releasepage() is no longer being
charged and won't recurse and overrun the stack anymore.

But it's not impossible for an accounted allocation to happen from the
memcg direct reclaim context, and we needed to reproduce this crash many
times before we even got a useful stack trace out of it.

Like other direct reclaimers, mark tasks in memcg reclaim PF_MEMALLOC to
avoid recursing into any other form of direct reclaim.  Then let
recursive charges from PF_MEMALLOC contexts bypass the cgroup limit.

Link: http://lkml.kernel.org/r/20161025141050.GA13019@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-27 18:43:43 -07:00
Martin Kepplinger
8f72cb4ef9 CREDITS: update credit information for Martin Kepplinger
Content and employer changed.

Link: http://lkml.kernel.org/r/1477304102-28830-1-git-send-email-martin.kepplinger@ginzinger.com
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-27 18:43:43 -07:00
Leon Yu
06b2849d10 proc: fix NULL dereference when reading /proc/<pid>/auxv
Reading auxv of any kernel thread results in NULL pointer dereferencing
in auxv_read() where mm can be NULL.  Fix that by checking for NULL mm
and bailing out early.  This is also the original behavior changed by
recent commit c531716785 ("proc: switch auxv to use of __mem_open()").

  # cat /proc/2/auxv
  Unable to handle kernel NULL pointer dereference at virtual address 000000a8
  Internal error: Oops: 17 [#1] PREEMPT SMP ARM
  CPU: 3 PID: 113 Comm: cat Not tainted 4.9.0-rc1-ARCH+ #1
  Hardware name: BCM2709
  task: ea3b0b00 task.stack: e99b2000
  PC is at auxv_read+0x24/0x4c
  LR is at do_readv_writev+0x2fc/0x37c
  Process cat (pid: 113, stack limit = 0xe99b2210)
  Call chain:
    auxv_read
    do_readv_writev
    vfs_readv
    default_file_splice_read
    splice_direct_to_actor
    do_splice_direct
    do_sendfile
    SyS_sendfile64
    ret_fast_syscall

Fixes: c531716785 ("proc: switch auxv to use of __mem_open()")
Link: http://lkml.kernel.org/r/1476966200-14457-1-git-send-email-chianglungyu@gmail.com
Signed-off-by: Leon Yu <chianglungyu@gmail.com>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Cc: John Stultz <john.stultz@linaro.org>
Cc: Mateusz Guzik <mguzik@redhat.com>
Cc: Janis Danisevskis <jdanis@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-10-27 18:43:43 -07:00