[ Upstream commit 803b9eabc6 ]
The `separate_colour_plane_flag` element is only present in the SPS if
`chroma_format_idc == 3`, so the corresponding flag should be disabled
whenever that is not the case and not just on profiles where
`chroma_format_idc` is not present.
Fixes: b32e48503d ("media: controls: Validate H264 stateless controls")
Signed-off-by: James Cowgill <james.cowgill@blaize.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a70705d3c0 upstream.
If we fail to commit an entity, we need to restore the
UVC_CTRL_DATA_BACKUP for the other uncommitted entities. Otherwise the
control cache and the device would be out of sync.
Cc: stable@kernel.org
Fixes: b4012002f3 ("[media] uvcvideo: Add support for control events")
Reported-by: Hans de Goede <hdegoede@redhat.com>
Closes: https://lore.kernel.org/linux-media/fe845e04-9fde-46ee-9763-a6f00867929a@redhat.com/
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Message-ID: <20250224-uvc-data-backup-v2-3-de993ed9823b@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 387e893930 upstream.
uvc_gpio_parse() can return -EPROBE_DEFER when the GPIOs it depends on
have not yet been probed. This return code should be propagated to the
caller of uvc_probe() to ensure that probing is retried when the required
GPIOs become available.
Currently, this error code is incorrectly converted to -ENODEV,
causing some internal cameras to be ignored.
This commit fixes this issue by propagating the -EPROBE_DEFER error.
Cc: stable@vger.kernel.org
Fixes: 2886477ff9 ("media: uvcvideo: Implement UVC_EXT_GPIO_UNIT")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Message-ID: <20250313-uvc-eprobedefer-v3-1-a1d312708eef@chromium.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c791467ae upstream.
Today, when we are applying a change to entities A, B. If A succeeds and B
fails the events for A are not sent.
This change changes the code so the events for A are send right after
they happen.
Cc: stable@kernel.org
Fixes: b4012002f3 ("[media] uvcvideo: Add support for control events")
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Message-ID: <20250224-uvc-data-backup-v2-2-de993ed9823b@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ba4fafb02a upstream.
If we let know our callers that we have not done anything, they will be
able to optimize their decisions.
Cc: stable@kernel.org
Fixes: b4012002f3 ("[media] uvcvideo: Add support for control events")
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Message-ID: <20250224-uvc-data-backup-v2-1-de993ed9823b@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7500bb9cf1 upstream.
When allocation failures are not cleaned up by the driver, further
allocation errors will be false-positives, which will cause buffers to
remain uninitialized and cause NULL pointer dereferences.
Ensure proper cleanup of failed allocations to prevent these issues.
Fixes: 2db16c6ed7 ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit faa8051b12 upstream.
Ensure that the slot data pointers are reset to NULL and handles are
set to 0 after freeing the coherent memory. This makes he function
mxc_jpeg_alloc_slot_data() and mxc_jpeg_free_slot_data() safe to be
called multiple times.
Fixes: 2db16c6ed7 ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 46e9c092f8 upstream.
Move function mxc_jpeg_free_slot_data() above mxc_jpeg_alloc_slot_data()
allowing to call that function during allocation failures.
No functional changes are made.
Fixes: 2db16c6ed7 ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d52b9b7e2f upstream.
When an output buffer contains error frame header,
v4l2_jpeg_parse_header() will return error, then driver will mark this
buffer and a capture buffer done with error flag in device_run().
But if the error occurs in the first frames, before setup the capture
queue, there is no chance to schedule device_run(), and there may be no
capture to mark error.
So we need to drop this buffer with error flag, and make the decoding
can continue.
Fixes: 2db16c6ed7 ("media: imx-jpeg: Add V4L2 driver for i.MX8 JPEG Encoder/Decoder")
Cc: stable@vger.kernel.org
Signed-off-by: Ming Qian <ming.qian@oss.nxp.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a704a3c503 upstream.
Use common wrappers operating directly on the struct sg_table objects to
fix incorrect use of scatterlists sync calls. dma_sync_sg_for_*()
functions have to be called with the number of elements originally passed
to dma_map_sg_*() function, not the one returned in sgt->nents.
Fixes: d4db5eb57c ("media: videobuf2: add begin/end cpu_access callbacks to dma-sg")
CC: stable@vger.kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Acked-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 523cea3a19 upstream.
Video device registering has been moved earlier in the probe function,
but the new order has not been propagated to error handling. This means
we can end with unreleased resources on error (e.g dangling video device
on missing firmware probe aborting).
Fixes: 08b1cf474b ("media: venus: core, venc, vdec: Fix probe dependency error")
Cc: stable@vger.kernel.org
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Reviewed-by: Dikshita Agarwal <quic_dikshita@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2a934fdb01 upstream.
Once device_register() failed, we should call put_device() to
decrement reference count for cleanup. Or it could cause memory leak.
And move callback function v4l2_device_release() and v4l2_device_get()
before put_device().
As comment of device_register() says, 'NOTE: _Never_ directly free
@dev after calling this function, even if it returned an error! Always
use put_device() to give up the reference initialized in this function
instead.'
Found by code review.
Cc: stable@vger.kernel.org
Fixes: dc93a70cc7 ("V4L/DVB (9973): v4l2-dev: use the release callback from device instead of cdev")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3de572fe21 upstream.
Use common wrappers operating directly on the struct sg_table objects to
fix incorrect use of scatterlists sync calls. dma_sync_sg_for_*()
functions have to be called with the number of elements originally passed
to dma_map_sg_*() function, not the one returned in sgtable's nents.
Fixes: d33186d0be ("[media] omap3isp: ccdc: Use the DMA API for LSC")
Fixes: 0e24e90f2c ("[media] omap3isp: stat: Use the DMA API")
CC: stable@vger.kernel.org
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f19035b863 upstream.
The framebuffer size for decoder instances was being incorrectly set -
inst->vsi_core->fb.y.size was assigned twice consecutively.
Assign the second picinfo framebuffer size to the C framebuffer instead,
which appears to be the intended target based on the surrounding code.
Fixes: 2674486aac ("media: mediatek: vcodec: support stateless hevc decoder")
Cc: stable@vger.kernel.org
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d471fb06b2 upstream.
There was a hardware bug which need IPU6 driver to disable the ATS. This
workaround is not needed anymore as the bug was fixed in hardware level.
Additionally, Arrow Lake has the same IPU6 PCI ID and x86 stepping but
does not have the bug. Removing the Meteor Lake workaround is also
required for the driver to function on Arrow Lake.
Signed-off-by: Hao Yao <hao.yao@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Fixes: 25fedc0219 ("media: intel/ipu6: add Intel IPU6 PCI device driver")
Cc: stable@vger.kernel.org
[Sakari Ailus: Added tags and explanation of what is fixed.]
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0209916ebe upstream.
We use dma_get_mask() of auxdev device for calculate iova pfn limit.
This is always 32 bit mask as we do not initialize the mask (and we can
not do so, since dev->dev_mask is NULL anyways for auxdev).
Since we need 31 bit mask for non-secure mode use mmu_info->aperture_end
which is properly initialized to correct mask for both modes.
Fixes: daabc5c647 ("media: ipu6: not override the dma_ops of device in driver")
Cc: stable@vger.kernel.org
Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b240df2913 upstream.
In commit cfa49ff055 ("media: i2c: imx335: Support 2592x1940 10-bit
mode") the IMX335 driver was extended to support multiple output
bitdepth modes.
This incorrectly extended the frame size enumeration to check against
the supported mbus_codes array instead of the supported mode/frame
array. This has the unwanted side effect of reporting the currently
supported frame size 2592x1944 three times.
Fix the check accordingly to report a frame size for each supported
size, which is presently only a single entry.
Fixes: cfa49ff055 ("media: i2c: imx335: Support 2592x1940 10-bit mode")
Cc: stable@vger.kernel.org
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 398a1b33f1 upstream.
In hdcs_init(), the return value of stv06xx_read_sensor() needs to be
checked. A proper implementation can be found in vv6410_dump(). Add a
check in loop condition and propergate error code to fix this issue.
Fixes: 4c98834add ("V4L/DVB (10048): gspca - stv06xx: New subdriver.")
Cc: stable@vger.kernel.org # v2.6+
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 024bf40edf upstream.
If an error occurs during the initialization of `pdev_display`,
the allocated platform device `pdev_capture` is not released properly,
leading to a memory leak.
Adjust error path handling to fix the leak.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 43acb728bb ("media: davinci: vpif: fix use-after-free on driver unbind")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Nikiforov <Dm1tryNk@yandex.ru>
Reviewed-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 73fb3b92da upstream.
syzbot reported a uninit-value in cxusb_i2c_xfer. [1]
Only when the write operation of usb_bulk_msg() in dvb_usb_generic_rw()
succeeds and rlen is greater than 0, the read operation of usb_bulk_msg()
will be executed to read rlen bytes of data from the dvb device into the
rbuf.
In this case, although rlen is 1, the write operation failed which resulted
in the dvb read operation not being executed, and ultimately variable i was
not initialized.
[1]
BUG: KMSAN: uninit-value in cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline]
BUG: KMSAN: uninit-value in cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196
cxusb_gpio_tuner drivers/media/usb/dvb-usb/cxusb.c:124 [inline]
cxusb_i2c_xfer+0x153a/0x1a60 drivers/media/usb/dvb-usb/cxusb.c:196
__i2c_transfer+0xe25/0x3150 drivers/i2c/i2c-core-base.c:-1
i2c_transfer+0x317/0x4a0 drivers/i2c/i2c-core-base.c:2315
i2c_transfer_buffer_flags+0x125/0x1e0 drivers/i2c/i2c-core-base.c:2343
i2c_master_send include/linux/i2c.h:109 [inline]
i2cdev_write+0x210/0x280 drivers/i2c/i2c-dev.c:183
do_loop_readv_writev fs/read_write.c:848 [inline]
vfs_writev+0x963/0x14e0 fs/read_write.c:1057
do_writev+0x247/0x5c0 fs/read_write.c:1101
__do_sys_writev fs/read_write.c:1169 [inline]
__se_sys_writev fs/read_write.c:1166 [inline]
__x64_sys_writev+0x98/0xe0 fs/read_write.c:1166
x64_sys_call+0x2229/0x3c80 arch/x86/include/generated/asm/syscalls_64.h:21
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x1e0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Reported-by: syzbot+526bd95c0ec629993bf3@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=526bd95c0ec629993bf3
Tested-by: syzbot+526bd95c0ec629993bf3@syzkaller.appspotmail.com
Fixes: 22c6d93a73 ("[PATCH] dvb: usb: support Medion hybrid USB2.0 DVB-T/analogue box")
Cc: stable@vger.kernel.org
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f639494db4 upstream.
The PLL calculator does a search of the PLL configuration space for all
valid OP pre-PLL clock dividers. The maximum did not take into account the
CCS PLL flag CCS_PLL_FLAG_EXT_IP_PLL_DIVIDER in which case also odd PLL
dividers (other than 1) are valid. Do that now.
Fixes: 4e1e8d240d ("media: ccs-pll: Add support for extended input PLL clock divider")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 660e613d05 upstream.
The ccs_pll_calculate() function does a search over possible PLL
configurations to find the "best" one. If the sensor does not support odd
pre-PLL divisors and the minimum value (with constraints) isn't 1, other
odd values could be errorneously searched (and selected) for the pre-PLL
divisor. Fix this.
Fixes: 415ddd9939 ("media: ccs-pll: Split limits and PLL configuration into front and back parts")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 81cf4f46a0 upstream.
When v4l2_subdev_init_finalize() fails no changes have been made to
the runtime-pm device state yet, so the probe_error_media_entity_cleanup
rollback path should not touch the runtime-pm device state.
Instead this should be done from the probe_error_v4l2_subdev_cleanup
rollback path. Note the pm_runtime_xxx() calls are put above
the v4l2_subdev_cleanup() call to have the reverse call order of probe().
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Fixes: 289c25923e ("media: ov2740: Use sub-device active state")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 06d2d478b0 upstream.
The ccs_pll_calculate_vt_tree() function does a search over possible VT
PLL configurations to find the "best" one. If the sensor does not support
odd pre-PLL divisors and the minimum value (with constraints) isn't 1,
other odd values could be errorneously searched (and selected) for the
pre-PLL divisor. Fix this.
Fixes: 415ddd9939 ("media: ccs-pll: Split limits and PLL configuration into front and back parts")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef20527313 upstream.
When setting the sink pad's stream format, set_fmt accidentally changes
the returned format's code to 'outcode', while the purpose is to only
use the 'outcode' for the propagated source stream format.
Fixes: c158d0d4ff ("media: i2c: add DS90UB913 driver")
Cc: stable@vger.kernel.org
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 910efa6490 upstream.
Currently, if streamon/streamoff calls are imbalanced we can either end up
with a negative ISI m2m usage_count (if streamoff() is called more times
than streamon()) in which case we'll not be able to restart the ISI pipe
next time, or the usage_count never gets to 0 and the pipe is never
switched off.
To avoid that, add a 'streaming' flag to mxc_isi_m2m_ctx_queue_data and use it
in the streamon/streamoff to avoid incrementing/decrementing the usage_count
uselessly, if called multiple times from the same context.
Fixes: cf21f328fc ("media: nxp: Add i.MX8 ISI driver")
Cc: stable@vger.kernel.org
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://lore.kernel.org/r/20241023085643.978729-1-laurentiu.palcu@oss.nxp.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b122c9cfcb upstream.
CCI_REG_HNUM should be using CCI_REG16_LE() instead of CCI_REG8()
as HNUM spans from 0x302e[0:7] to 0x302f[0:3].
Signed-off-by: Umang Jain <umang.jain@ideasonboard.com>
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Fixes: 8f0926dba7 ("media: imx335: Use V4L2 CCI for accessing sensor registers")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8268da3c47 upstream.
Probe deferral should not be logged as an error:
ov5675 24-0010: failed to get HW configuration: -517
Drop the (mostly) redundant dev_err() from sensor probe() to suppress
it.
Note that errors during clock and regulator lookup are already correctly
logged using dev_err_probe().
Fixes: 49d9ad719e ("media: ov5675: add device-tree support and support runtime PM")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e3d86847fb upstream.
Probe deferral should not be logged as an error:
ov8856 24-0010: failed to get HW configuration: -517
Use dev_err_probe() for the clock lookup and drop the (mostly) redundant
dev_err() from sensor probe() to suppress it.
Note that errors during regulator lookup is already correctly logged
using dev_err_probe().
Fixes: 0c2c7a1e0d ("media: ov8856: Add devicetree support")
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 11beb0fc34 ]
During initialization, the post processor allocates the same number of
buffers as the buf queue.
As the init function is called in streamon(), if an allocation fails,
streamon will return an error and streamoff() will not be called, keeping
all post processor buffers allocated.
To avoid that, all post proc buffers are freed in case of an allocation
error.
Fixes: 26711491a8 ("media: verisilicon: Refactor postprocessor to store more buffers")
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f4204bb00 ]
Add a default case in vfe_src_pad_code to get rid of a compile
warning if a new hw enum is added.
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f1361f862 ]
There is no CSID TPG on some SoCs, so the v4l2 ctrl in CSID driver
shouldn't be registered. Checking the supported TPG modes to indicate
if the TPG hardware exists or not and only registering v4l2 ctrl for
CSID only when the TPG hardware is present.
Signed-off-by: Depeng Shao <quic_depengs@quicinc.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91d6a99acf ]
Memset the config argument to get_mbus_config V4L2 sub-device pad
operation to zero before calling the operation. This ensures the callers
don't need to bother with it nor the implementations need to set all
fields that may not be relevant to them.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3b82d49bf ]
The datasheet for this sensor documents the minimum vblanking as being
32 lines. It does fix some problems with occasional black lines at the
bottom of images (tested on Raspberry Pi).
Signed-off-by: David Plowman <david.plowman@raspberrypi.com>
Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4740118b7 ]
Artem reported that the CPU load was 100% when capturing from
vivid at low resolution with ffmpeg.
This was caused by:
while (time_is_after_jiffies(cur_jiffies + wait_jiffies) &&
!kthread_should_stop())
schedule();
If there are no other processes running that can be scheduled,
then this is basically a busy-loop.
Change it to wait_event_interruptible_timeout() which doesn't
have that problem.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Reported-by: Artem S. Tashkinov <aros@gmx.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219570
Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78d7265e2e ]
When calculating D-PHY registers, using data rates that are not multiples
of 16 can lead to precision loss in division operations. This can result in
register values that produce timing violations against the MIPI standard.
An example:
cfg->hs_clk_rate = 294MHz
hf_clk = 18
If the desired value in cfg->init is 100us, which is the minimum allowed
value, then the LINEINITCNT register is calculated as 1799. But since the
actual clock is 18.375MHz instead of 18MHz, this setting results in a time
that is shorter than 100us and thus violates the standard. The correct
value for LINEINITCNT would be 1837.
Improve the precision of calculations by using Hz instead of MHz as unit.
Signed-off-by: Matthias Fend <matthias.fend@emfend.at>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a980bc5f56 ]
The register that enables selecting a test-pattern to be outputted in
free-run mode (FREE_RUN_PAT_SEL[2:0]) is only available on adv7280 based
devices, not the adv7180 based ones.
Add a flag to mark devices that are capable of generating test-patterns,
and those that are not. And only register the control on supported
devices.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9109a0b4cb ]
map->get() gets a value from an uvc_control in "UVC format" and converts
it to a value that can be consumed by v4l2.
Instead of using a special get function for V4L2_CTRL_TYPE_MENU, we
were converting from uvc_get_le_value in two different places.
Move the conversion to uvc_get_le_value().
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Yunke Cao <yunkec@google.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-4-5900a9fed613@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 990262fdfc ]
Do not process unknown data types.
Tested-by: Yunke Cao <yunkec@google.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Link: https://lore.kernel.org/r/20250203-uvc-roi-v17-15-5900a9fed613@chromium.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0aa40f45f ]
When the vblank v4l2 control is set, it does not get written to the
hardware unless exposure is also changed. Change the behavior such that
the vblank is written immediately when the control is set, as setting
the vblank without changing the exposure is a valid use case (such as
for changing the frame rate).
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a79efc44b5 ]
The video_device for the MPEG encoder did not set device_caps.
Add this, otherwise the video device can't be registered (you get a
WARN_ON instead).
Not seen before since currently 417 support is disabled, but I found
this while experimenting with it.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b773530a34 ]
An of_node_put(i2c_bus) call was immediately used after a pointer check
for an of_find_i2c_adapter_by_node() call in this function implementation.
Thus call such a function only once instead directly before the check.
This issue was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 38985a2568 upstream.
You can't pass uninitialized "ret" variables to cci_write(). It has to
start as zero.
Fixes: 4f0aeba4f1 ("media: i2c: imx214: Convert to CCI register access helpers")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: André Apitzsch <git@apitzsch.eu>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ebf185efad ]
The driver might skip the ov08x40_identify_module() on probe() based on
the acpi_dev_state_d0() check done in probe().
If the ov08x40_identify_module() call is skipped on probe() it should
be done on the first stream start. Add the missing call.
Note ov08x40_identify_module() will only do something on its first call,
subsequent calls are no-ops.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Fixes: b1a42fde6e ("media: ov08x40: Avoid sensor probing in D0 state")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a39639e44 ]
Move the ov08x40_identify_module() function to above ov08x40_set_stream()
this is a preparation patch for adding a missing ov08x40_identify_module()
call to ov08x40_set_stream().
No functional changes, just moving code around.
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Stable-dep-of: ebf185efad ("media: ov08x40: Add missing ov08x40_identify_module() call on stream-start")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit acc294519f ]
The driver defines IMX214_DEFAULT_LINK_FREQ 480000000, and then
IMX214_DEFAULT_PIXEL_RATE ((IMX214_DEFAULT_LINK_FREQ * 8LL) / 10),
which works out as 384MPix/s. (The 8 is 4 lanes and DDR.)
Parsing the PLL registers with the defined 24MHz input. We're in single
PLL mode, so MIPI frequency is directly linked to pixel rate. VTCK ends
up being 1200MHz, and VTPXCK and OPPXCK both are 120MHz. Section 5.3
"Frame rate calculation formula" says "Pixel rate
[pixels/s] = VTPXCK [MHz] * 4", so 120 * 4 = 480MPix/s, which basically
agrees with my number above.
3.1.4. MIPI global timing setting says "Output bitrate = OPPXCK * reg
0x113[7:0]", so 120MHz * 10, or 1200Mbit/s. That would be a link
frequency of 600MHz due to DDR.
That also matches to 480MPix/s * 10bpp / 4 lanes / 2 for DDR.
Keep the previous link frequency for backward compatibility.
Acked-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Fixes: 4361905962 ("media: imx214: Add imx214 camera sensor driver")
Cc: stable@vger.kernel.org
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
