[ Upstream commit 8436112341 ]
When transitioning from 5-level to 4-level paging, the existing code
incorrectly accesses page table entries by directly dereferencing CR3 and
applying PAGE_MASK. This approach has several issues:
- __native_read_cr3() returns the raw CR3 register value, which on x86_64
includes not just the physical address but also flags Bits above the
physical address width of the system (i.e. above __PHYSICAL_MASK_SHIFT) are
also not masked.
- The pgd value is masked by PAGE_SIZE which doesn't take into account the
higher bits such as _PAGE_BIT_NOPTISHADOW.
Replace this with proper accessor functions:
- native_read_cr3_pa(): Uses CR3_ADDR_MASK to additionally mask metadata out
of CR3 (like SME or LAM bits). All remaining bits are real address bits or
reserved and must be 0.
- mask pgd value with PTE_PFN_MASK instead of PAGE_MASK, accounting for flags
above bit 51 (_PAGE_BIT_NOPTISHADOW in particular). Bits below 51, but above
the max physical address are reserved and must be 0.
Fixes: cb1c9e02b0 ("x86/efistub: Perform 4/5 level paging switch from the stub")
Reported-by: Michael van der Westhuizen <rmikey@meta.com>
Reported-by: Tobias Fleig <tfleig@meta.com>
Co-developed-by: Kiryl Shutsemau <kas@kernel.org>
Signed-off-by: Kiryl Shutsemau <kas@kernel.org>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://patch.msgid.link/20251103141002.2280812-3-usamaarif642@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb22663125 ]
When transitioning from 5-level to 4-level paging, the existing code
incorrectly accesses page table entries by directly dereferencing CR3 and
applying PAGE_MASK. This approach has several issues:
- __native_read_cr3() returns the raw CR3 register value, which on x86_64
includes not just the physical address but also flags. Bits above the
physical address width of the system i.e. above __PHYSICAL_MASK_SHIFT) are
also not masked.
- The PGD entry is masked by PAGE_SIZE which doesn't take into account the
higher bits such as _PAGE_BIT_NOPTISHADOW.
Replace this with proper accessor functions:
- native_read_cr3_pa(): Uses CR3_ADDR_MASK to additionally mask metadata out
of CR3 (like SME or LAM bits). All remaining bits are real address bits or
reserved and must be 0.
- mask pgd value with PTE_PFN_MASK instead of PAGE_MASK, accounting for flags
above bit 51 (_PAGE_BIT_NOPTISHADOW in particular). Bits below 51, but above
the max physical address are reserved and must be 0.
Fixes: e9d0e6330e ("x86/boot/compressed/64: Prepare new top-level page table for trampoline")
Reported-by: Michael van der Westhuizen <rmikey@meta.com>
Reported-by: Tobias Fleig <tfleig@meta.com>
Co-developed-by: Kiryl Shutsemau <kas@kernel.org>
Signed-off-by: Kiryl Shutsemau <kas@kernel.org>
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/r/a482fd68-ce54-472d-8df1-33d6ac9f6bb5@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3862123e9b ]
The "ti,twl4030-power-n900" compatible string is obsolete and is not
supported by any in-kernel driver. Currently, the kernel falls back to
the second entry, "ti,twl4030-power-idle-osc-off", to bind a driver to
this node.
Make this fallback explicit by removing the obsolete board-specific
compatible. This preserves the existing functionality while making the
DTS compliant with the new, stricter 'ti,twl.yaml' binding.
Fixes: daebabd578 ("mfd: twl4030-power: Fix PM idle pin configuration to not conflict with regulators")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/r/20250914192516.164629-4-jihed.chaibi.dev@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f7f3bc1830 ]
The "ti,twl4030-power-beagleboard-xm" compatible string is obsolete and
is not supported by any in-kernel driver. Currently, the kernel falls
back to the second entry, "ti,twl4030-power-idle-osc-off", to bind a
driver to this node.
Make this fallback explicit by removing the obsolete board-specific
compatible. This preserves the existing functionality while making the
DTS compliant with the new, stricter 'ti,twl.yaml' binding.
Fixes: 9188883fd6 ("ARM: dts: Enable twl4030 off-idle configuration for selected omaps")
Signed-off-by: Jihed Chaibi <jihed.chaibi.dev@gmail.com>
Link: https://lore.kernel.org/r/20250914192516.164629-3-jihed.chaibi.dev@gmail.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f596acc26 ]
When creating multi-split BTF we correctly set the start string offset
to be the size of the base string section plus the base BTF start
string offset; the latter is needed for multi-split BTF since the
offset is non-zero there.
Unfortunately the BTF parsing case needed that logic and it was
missed.
Fixes: 4e29128a9a ("libbpf/btf: Fix string handling to support multi-split BTF")
Signed-off-by: Alan Maguire <alan.maguire@oracle.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20251104203309.318429-2-alan.maguire@oracle.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4e002d8a7 ]
When the CPU that the QSPI interrupt handler runs on (typically CPU 0)
is excessively busy, it can lead to rare cases of the IRQ thread not
running before the transfer timeout is reached.
While handling the timeouts, any pending transfers are cleaned up and
the message that they correspond to is marked as failed, which leaves
the curr_xfer field pointing at stale memory.
To avoid this, clear curr_xfer to NULL upon timeout and check for this
condition when the IRQ thread is finally run.
While at it, also make sure to clear interrupts on failure so that new
interrupts can be run.
A better, more involved, fix would move the interrupt clearing into a
hard IRQ handler. Ideally we would also want to signal that the IRQ
thread no longer needs to be run after the timeout is hit to avoid the
extra check for a valid transfer.
Fixes: 921fc1838f ("spi: tegra210-quad: Add support for Tegra210 QSPI controller")
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Vishwaroop A <va@nvidia.com>
Link: https://patch.msgid.link/20251028155703.4151791-2-va@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98dd514344 ]
If the MMU is down, panthor_vm_unmap_range() might return an error.
We expect the page table to be updated still, and if the MMU is blocked,
the rest of the GPU should be blocked too, so no risk of accessing
physical memory returned to the system (which the current code doesn't
cover for anyway).
Proceed with the rest of the cleanup instead of bailing out and leaving
the va_node inserted in the drm_mm, which leads to UAF when other
adjacent nodes are removed from the drm_mm tree.
Reported-by: Lars-Ivar Hesselberg Simonsen <lars-ivar.simonsen@arm.com>
Closes: https://gitlab.freedesktop.org/panfrost/linux/-/issues/57
Fixes: 8a1cc07578 ("drm/panthor: Add GEM logical block")
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20251031154818.821054-2-boris.brezillon@collabora.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08be57e6e8 ]
There is a race between panthor_device_unplug() and
panthor_device_suspend() which can lead to IRQ handlers running on a
powered down GPU. This is how it can happen:
- unplug routine calls drm_dev_unplug()
- panthor_device_suspend() can now execute, and will skip a lot of
important work because the device is currently marked as unplugged.
- IRQs will remain active in this case and IRQ handlers can therefore
try to access a powered down GPU.
The fix is simply to take the PM ref in panthor_device_unplug() a
little bit earlier, before drm_dev_unplug().
Signed-off-by: Ketil Johnsen <ketil.johnsen@arm.com>
Fixes: 5fe909cae1 ("drm/panthor: Add the device logical block")
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://patch.msgid.link/20251022103242.1083311-1-ketil.johnsen@arm.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7051f6ba96 ]
The function panthor_fw_unplug() will free the FW memory sections.
The problem is that there could still be pending FW events which are yet
not handled at this point. process_fw_events_work() can in this case try
to access said freed memory.
Simply call disable_work_sync() to both drain and prevent future
invocation of process_fw_events_work().
Signed-off-by: Ketil Johnsen <ketil.johnsen@arm.com>
Fixes: de85488138 ("drm/panthor: Add the scheduler logical block")
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20251027140217.121274-1-ketil.johnsen@arm.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94a6d20fea ]
group_free_queue() can be called on a partially initialized queue
object if something fails in group_create_queue(). Make sure we don't
call drm_sched_entity_destroy() on an entity that hasn't been
initialized.
Fixes: 7d9c3442b0 ("drm/panthor: Defer scheduler entitiy destruction to queue release")
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251031160318.832427-2-boris.brezillon@collabora.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb7939e332 ]
In practice it's not going to fail because we're passing the current
sanity checks done by drm_sched_entity_init(), and that's the only
reason it would return an error, but better safe than sorry.
Fixes: de85488138 ("drm/panthor: Add the scheduler logical block")
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Link: https://patch.msgid.link/20251031160318.832427-1-boris.brezillon@collabora.com
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a63dd8fd13 ]
When page cache is used, writebacks are done on a page granularity, and it
is expected that the underlying filesystem (such as v9fs) should respect
the write position. However, currently v9fs will passthrough O_APPEND to
the server even on cached mode. This causes data corruption if a sync or
fstat gets between two writes to the same file.
This patch removes the APPEND flag from the open request we send to the
server when writeback caching is involved. I believe keeping server-side
APPEND is probably fine for uncached mode (even if two fds are opened, one
without O_APPEND and one with it, this should still be fine since they
would use separate fid for the writes).
Signed-off-by: Tingmao Wang <m@maowtm.org>
Fixes: 4eb3117888 ("fs/9p: Rework cache modes and add new options to Documentation")
Message-ID: <20251102235631.8724-1-m@maowtm.org>
Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea14bae6df ]
Since wm831x_set_bits() may return error, log failure and exit from
wm831x_usb_limit_change() in such case.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 626b6cd5f5 ("power: wm831x_power: Support USB charger current limit management")
Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru>
Link: https://patch.msgid.link/20251009170553.566561-1-i.abramov@mt-integration.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15aca30cc6 ]
There is a typo in rt9467_set_value_from_ranges() that can cause leaving local
variable sel with an undefined value which is then used in regmap_field_write().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 6f7f70e3a8 ("power: supply: rt9467: Add Richtek RT9467 charger driver")
Signed-off-by: Murad Masimov <m.masimov@mt-integration.ru>
Link: https://patch.msgid.link/20251009145308.1830893-1-m.masimov@mt-integration.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b27fe2d8d ]
The return value of rt9467_set_value_from_ranges() when setting AICL VTH is
not checked, even though it may fail.
Log error and return from rt9467_run_aicl() on fail.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 6f7f70e3a8 ("power: supply: rt9467: Add Richtek RT9467 charger driver")
Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru>
Link: https://patch.msgid.link/20251009144725.562278-1-i.abramov@mt-integration.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2c68ac48c5 ]
Since iio_read_channel_processed() may fail, return its exit code on error.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 814755c48f ("power: max17040: get thermal data from adc if available")
Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru>
Link: https://patch.msgid.link/20251008133648.559286-1-i.abramov@mt-integration.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92ec7e7b86 ]
Since devm_delayed_work_autocancel() may fail, add return code check and
exit cw_bat_probe() on error.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 0cb172a491 ("power: supply: cw2015: Use device managed API to simplify the code")
Signed-off-by: Ivan Abramov <i.abramov@mt-integration.ru>
Link: https://patch.msgid.link/20251008120711.556021-1-i.abramov@mt-integration.ru
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6cdc4d488c ]
The device node pointers `np_conn` and `np_edev`, obtained from
of_parse_phandle() and of_get_parent() respectively, are not released.
This results in a reference count leak.
Add of_node_put() calls after the last use of these device nodes to
properly release their references and fix the leaks.
Fixes: 8242336dc8 ("power: supply: rt5033_charger: Add cable detection and USB OTG supply")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20250929113234.1726-1-vulab@iscas.ac.cn
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 163e5f2b96 ]
When using perf record with the `--overwrite` option, a segmentation fault
occurs if an event fails to open. For example:
perf record -e cycles-ct -F 1000 -a --overwrite
Error:
cycles-ct:H: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat'
perf: Segmentation fault
#0 0x6466b6 in dump_stack debug.c:366
#1 0x646729 in sighandler_dump_stack debug.c:378
#2 0x453fd1 in sigsegv_handler builtin-record.c:722
#3 0x7f8454e65090 in __restore_rt libc-2.32.so[54090]
#4 0x6c5671 in __perf_event__synthesize_id_index synthetic-events.c:1862
#5 0x6c5ac0 in perf_event__synthesize_id_index synthetic-events.c:1943
#6 0x458090 in record__synthesize builtin-record.c:2075
#7 0x45a85a in __cmd_record builtin-record.c:2888
#8 0x45deb6 in cmd_record builtin-record.c:4374
#9 0x4e5e33 in run_builtin perf.c:349
#10 0x4e60bf in handle_internal_command perf.c:401
#11 0x4e6215 in run_argv perf.c:448
#12 0x4e653a in main perf.c:555
#13 0x7f8454e4fa72 in __libc_start_main libc-2.32.so[3ea72]
#14 0x43a3ee in _start ??:0
The --overwrite option implies --tail-synthesize, which collects non-sample
events reflecting the system status when recording finishes. However, when
evsel opening fails (e.g., unsupported event 'cycles-ct'), session->evlist
is not initialized and remains NULL. The code unconditionally calls
record__synthesize() in the error path, which iterates through the NULL
evlist pointer and causes a segfault.
To fix it, move the record__synthesize() call inside the error check block, so
it's only called when there was no error during recording, ensuring that evlist
is properly initialized.
Fixes: 4ea648aec0 ("perf record: Add --tail-synthesize option")
Signed-off-by: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 553d18c98a ]
On some machines, it caused troubles when it tried to find kernel
symbols. I think it's because kernel modules and kallsyms are messed
up during load and split.
Basically we want to make sure the kernel map is loaded and the code has
it in the lock_contention_read(). But recently we added more lookups in
the lock_contention_prepare() which is called before _read().
Also the kernel map (kallsyms) may not be the first one in the group
like on ARM. Let's use machine__kernel_map() rather than just loading
the first map.
Reviewed-by: Ian Rogers <irogers@google.com>
Fixes: 688d2e8de2 ("perf lock contention: Add -l/--lock-addr option")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1aa93005d ]
The call to devm_platform_ioremap_resource() was replaced by a call to
devm_platform_get_and_ioremap_resource(), but the comment referring to
the function's possible returned error codes was not updated.
Fixes: 927f3e0253 ("drm/imagination: Implement MIPS firmware processor and MMU support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Matt Coster <matt.coster@imgtec.com>
Link: https://patch.msgid.link/2266514318480d17f52c7e5e67578dae6827914e.1761745586.git.geert+renesas@glider.be
Signed-off-by: Matt Coster <matt.coster@imgtec.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6bfe104fd0 ]
The icc_commit_set() function, used by the debugfs interface, checks
the validity of the global cur_path pointer using IS_ERR_OR_NULL().
However, in the specific case where cur_path is NULL, while
IS_ERR_OR_NULL(NULL) correctly evaluates to true, the subsequent call
to PTR_ERR(NULL) returns 0.
This causes the function to return a success code (0) instead of an
error, misleading the user into believing their bandwidth request was
successfully committed when, in fact, no operation was performed.
Fix this by adding an explicit check to return -EINVAL if cur_path is
NULL. This prevents silent failures and ensures that an invalid
operational sequence is immediately and clearly reported as an error.
Fixes: 770c69f037 ("interconnect: Add debugfs test client")
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Link: https://lore.kernel.org/r/20251010151447.2289779-1-visitorckw@gmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 242f7558e7 ]
Add the missing interconnects to the USB2 host. The Fixes tag points to
the commit which broke probing of the USB host on that platform.
Fixes: 130733a100 ("interconnect: qcom: msm8996: Promote to core_initcall")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Acked-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20251002-fix-msm8996-icc-v1-2-a36a05d1f869@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8cf9b43f6b ]
>From the initial submission the interconnect driver missed the link from
SNOC_PNOC to the USB 2 configuration space. Add missing link in order to
let the platform configure and utilize this path.
Fixes: 7add937f52 ("interconnect: qcom: Add MSM8996 interconnect provider driver")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251002-fix-msm8996-icc-v1-1-a36a05d1f869@oss.qualcomm.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be5febd51c ]
When the call to ath12k_wmi_arp_ns_offload() fails, the temporary memory
allocation for offload is not freed before returning. Fix that by
freeing offload in the error path.
Fixes: 1666108c74 ("wifi: ath12k: support ARP and NS offload")
Signed-off-by: Abdun Nihaal <nihaal@cse.iitm.ac.in>
Reviewed-by: Baochen Qiang <baochen.qiang@oss.qualcomm.com>
Link: https://patch.msgid.link/20251028170457.134608-1-nihaal@cse.iitm.ac.in
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a36273e5a ]
If no free IBI slot is available, svc_i3c_master_handle_ibi returns
immediately. This causes the STOP condition to be missed because the
EmitStop request is sent when the transfer is not complete. To resolve
this, svc_i3c_master_handle_ibi must wait for the transfer to complete
before returning.
Fixes: dd3c52846d ("i3c: master: svc: Add Silvaco I3C master driver")
Signed-off-by: Stanley Chu <yschu@nuvoton.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20251027034715.708243-1-yschu@nuvoton.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d4f219807 ]
In `i3c_master_register`, a possible refcount inconsistency has been
identified, causing possible resource leak.
Function `of_node_get` increases the refcount of `parent->of_node`. If
function `i3c_bus_init` fails, the function returns immediately without
a corresponding decrease, resulting in an inconsistent refcounter.
Move call i3c_bus_init() after device_initialize() to let callback
i3c_masterdev_release() release of_node.
Reported-by: Shuhao Fu <sfual@cse.ust.hk>
Closes: https://lore.kernel.org/linux-i3c/aO2tjp_FsV_WohPG@osx.local/T/#m2c05a982beeb14e7bf039c1d8db856734bf234c7
Fixes: 3a379bbcea ("i3c: Add core I3C infrastructure")
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251016143814.2551256-1-Frank.Li@nxp.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 002679f79e ]
In stm32_pctl_probe(), hwspin_lock_request_specific() is called to
request a hwspinlock, but the acquired lock is not freed on multiple
error paths after this call. This causes resource leakage when the
function fails to initialize properly.
Use devm_hwspin_lock_request_specific() instead of
hwspin_lock_request_specific() to automatically manage the hwspinlock
resource lifecycle.
Fixes: 97cfb6cd34 ("pinctrl: stm32: protect configuration registers with a hwspinlock")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Antonio Borneo <antonio.borneo@foss.st.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc5db35073 ]
The hwspinlock acquired via hwspin_lock_request_specific() is not
released on several error paths. This results in resource leakage
when probe fails.
Switch to devm_hwspin_lock_request_specific() to automatically
handle cleanup on probe failure. Remove the manual hwspin_lock_free()
in qcom_smem_remove() as devm handles it automatically.
Fixes: 20bb6c9de1 ("soc: qcom: smem: map only partitions used by local HOST")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251029022733.255-1-vulab@iscas.ac.cn
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c485ca3aff ]
There is no errno variable when NOLIBC_IGNORE_ERRNO is defined. As such,
simply print the message with "unknown error" rather than the integer
value of errno.
Fixes: acab7bcdb1 ("tools/nolibc/stdio: add perror() to report the errno value")
Signed-off-by: Benjamin Berg <benjamin.berg@intel.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ced37e9cea ]
When triggering a stack dump via sysrq (echo t > /proc/sysrq-trigger),
KASAN may report false-positive out-of-bounds access:
BUG: KASAN: out-of-bounds in __show_regs+0x4b/0x340
Call Trace:
dump_stack_lvl
print_address_description.constprop.0
print_report
__show_regs
show_trace_log_lvl
sched_show_task
show_state_filter
sysrq_handle_showstate
__handle_sysrq
write_sysrq_trigger
proc_reg_write
vfs_write
ksys_write
do_syscall_64
entry_SYSCALL_64_after_hwframe
The issue occurs as follows:
Task A (walk other tasks' stacks) Task B (running)
1. echo t > /proc/sysrq-trigger
show_trace_log_lvl
regs = unwind_get_entry_regs()
show_regs_if_on_stack(regs)
2. The stack value pointed by
`regs` keeps changing, and
so are the tags in its
KASAN shadow region.
__show_regs(regs)
regs->ax, regs->bx, ...
3. hit KASAN redzones, OOB
When task A walks task B's stack without suspending it, the continuous changes
in task B's stack (and corresponding KASAN shadow tags) may cause task A to
hit KASAN redzones when accessing obsolete values on the stack, resulting in
false positive reports.
Simply stopping the task before unwinding is not a viable fix, as it would
alter the state intended to inspect. This is especially true for diagnosing
misbehaving tasks (e.g., in a hard lockup), where stopping might fail or hide
the root cause by changing the call stack.
Therefore, fix this by disabling KASAN checks during asynchronous stack
unwinding, which is identified when the unwinding task does not match the
current task (task != current).
[ bp: Align arguments on function's opening brace. ]
Fixes: 3b3fa11bc7 ("x86/dumpstack: Print any pt_regs found on the stack")
Signed-off-by: Tengda Wu <wutengda@huaweicloud.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://patch.msgid.link/all/20251023090632.269121-1-wutengda@huaweicloud.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 23f852daa4 ]
Syzkaller reported a KASAN slab-out-of-bounds write in __bpf_get_stackid()
when copying stack trace data. The issue occurs when the perf trace
contains more stack entries than the stack map bucket can hold,
leading to an out-of-bounds write in the bucket's data array.
Fixes: ee2a098851 ("bpf: Adjust BPF stack helper functions to accommodate skip > 0")
Reported-by: syzbot+c9b724fbb41cf2538b7b@syzkaller.appspotmail.com
Signed-off-by: Arnaud Lecomte <contact@arnaud-lcm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20251025192941.1500-1-contact@arnaud-lcm.com
Closes: https://syzkaller.appspot.com/bug?extid=c9b724fbb41cf2538b7b
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e17d62fedd ]
Extract the duplicated maximum allowed depth computation for stack
traces stored in BPF stacks from bpf_get_stackid() and __bpf_get_stack()
into a dedicated stack_map_calculate_max_depth() helper function.
This unifies the logic for:
- The max depth computation
- Enforcing the sysctl_perf_event_max_stack limit
No functional changes for existing code paths.
Signed-off-by: Arnaud Lecomte <contact@arnaud-lcm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Acked-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/bpf/20251025192858.31424-1-contact@arnaud-lcm.com
Stable-dep-of: 23f852daa4 ("bpf: Fix stackmap overflow check in __bpf_get_stackid()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e649bcda25 ]
The 'init_nr' argument has double duty: it's used to initialize both the
number of contexts and the number of stack entries. That's confusing
and the callers always pass zero anyway. Hard code the zero.
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Namhyung Kim <Namhyung@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/r/20250820180428.259565081@kernel.org
Stable-dep-of: 23f852daa4 ("bpf: Fix stackmap overflow check in __bpf_get_stackid()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cdf44f1add ]
The driver calls gpiod_get_optional() in the probe function but
never calls gpiod_put() in the remove function or in the probe
error path. This leads to a GPIO descriptor resource leak.
The lpc32xx_mlc.c driver in the same directory handles this
correctly by calling gpiod_put() on both paths.
Add gpiod_put() in the remove function and in the probe error path
to fix the resource leak.
Fixes: 6b923db286 ("mtd: rawnand: lpc32xx_slc: switch to using gpiod API")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 050553c683 ]
Due to the custom handling and layouts of certain nand controllers this
validity check will always fail for certain layouts. The check
inherently depends on even chunk sizing and this is not always the
case.
Modify the check to only print a warning, instead of failing to
init the attached NAND. This allows various 8 bit and 12 ECC strength
layouts to be used.
Fixes: 68c18dae68 ("mtd: rawnand: marvell: add missing layouts")
Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fbd72cb463 ]
This reverts commit e6a30d0c48.
This change resulted in the 8bit ECC layouts having the incorrect amount
of read/write chunks, the last spare bytes chunk would always be missed.
Fixes: e6a30d0c48 ("mtd: rawnand: marvell: fix layouts")
Signed-off-by: Aryan Srivastava <aryan.srivastava@alliedtelesis.co.nz>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00df14f346 ]
'bus-width' is defined for the corresponding vin input port already.
No need to declare it in the output port again. Fixes:
arch/arm/boot/dts/renesas/r8a7793-gose.dtb: composite-in@20 (adi,adv7180cp): ports:port@3:endpoint: Unevaluated properties are not allowed ('bus-width' was unexpected)
from schema $id: http://devicetree.org/schemas/media/i2c/adi,adv7180.yaml#
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250929093616.17679-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 622e8838a2 ]
SCTP_DBG_OBJCNT_INC() is called only when sctp_init_sock()
returns 0 after successfully allocating sctp_sk(sk)->ep.
OTOH, SCTP_DBG_OBJCNT_DEC() is called in sctp_close().
The code seems to expect that the socket is always exposed
to userspace once SCTP_DBG_OBJCNT_INC() is incremented, but
there is a path where the assumption is not true.
In sctp_accept(), sctp_sock_migrate() could fail after
sctp_init_sock().
Then, sk_common_release() does not call inet_release() nor
sctp_close(). Instead, it calls sk->sk_prot->destroy().
Let's move SCTP_DBG_OBJCNT_DEC() from sctp_close() to
sctp_destroy_sock().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Acked-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/20251023231751.4168390-2-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea5df88aec ]
The PTP initialization is two-step. First part are the function
vsc8584_ptp_probe_once() and vsc8584_ptp_probe() at probe time which
initialize the locks, queues, creates the PTP device. The second part is
the function vsc8584_ptp_init() at config_init() time which initialize
PTP in the HW.
For VSC8574 and VSC8572, the PTP initialization is incomplete. It is
missing the first part but it makes the second part. Meaning that the
ptp_clock_register() is never called.
There is no crash without the first part when enabling PTP but this is
unexpected because some PHys have PTP functionality exposed by the
driver and some don't even though they share the same PTP clock PTP.
Fixes: 774626fa44 ("net: phy: mscc: Add PTP support for 2 more VSC PHYs")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Link: https://patch.msgid.link/20251023191350.190940-3-horatiu.vultur@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f404fdcb50 ]
It seems we also need to reserve a region of 81 MiB called "removed_mem"
otherwise we can easily hit memory errors with higher RAM usage.
Fixes: 249666e34c ("arm64: dts: qcom: add QCM6490 SHIFTphone 8")
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251009-otter-further-bringup-v2-3-5bb2f4a02cea@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2703c9016 ]
The UFS device is ovbiously dma coherent like the other IOMMU devices
like usb, mmc, ... let's fix this by adding the flag.
To be sure an extensive test has been performed to be sure it's
safe, as downstream uses this flag for UFS as well.
As an experiment, I checked how the dma-coherent could impact
the UFS bandwidth, and it happens the max bandwidth on cached
write is slighly highter (up to 10%) while using less cpu time
since cache sync/flush is skipped.
Fixes: 10e0246712 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20251007-topic-sm8650-upstream-ufs-dma-coherent-v1-1-f3cfeaee04ce@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
