If the initialization of storvsc fails, the storvsc_device_destroy()
causes NULL pointer dereference.
storvsc_bus_scan()
scsi_scan_target()
__scsi_scan_target()
scsi_probe_and_add_lun(hostdata=NULL)
scsi_alloc_sdev(hostdata=NULL)
sdev->hostdata = hostdata
now the host allocation fails
__scsi_remove_device(sdev)
calls sdev->host->hostt->slave_destroy() ==
storvsc_device_destroy(sdev)
access of sdev->hostdata->request_mempool
Signed-off-by: Ales Novak <alnovak@suse.cz>
Signed-off-by: Thomas Abraham <tabraham@suse.com>
Reviewed-by: Jiri Kosina <jkosina@suse.cz>
Acked-by: K. Y. Srinivasan <kys@microsoft.com>
Cc: stable@vger.kernel.org
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
Upper bound checking of ino should be added to f2fs_nfs_get_inode, so unneeded
process before do_read_inode in f2fs_iget could be avoided when ino is invalid.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
miceroblaze:allmodconfig fails to build, complaining that
early_printk is redeclared.
include/linux/printk.h:114:6: error: static declaration of 'early_printk'
follows non-static declaration
void early_printk(const char *s, ...) { }
^
In file included from arch/microblaze/include/asm/page.h:19:0,
from arch/microblaze/include/asm/io.h:15,
from include/linux/io.h:22,
from kernel/irq/generic-chip.c:6:
arch/microblaze/include/asm/setup.h:22:6:
note: previous declaration of 'early_printk' was here
void early_printk(const char *fmt, ...);
This happens because CONFIG_EARLY_PRINTK is not enabled in this
configuration.
The architecture-specific declaration is not needed; drop it.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
microblaze:allmodconfig complains for some configurations that 'heartbeat'
is redefined as different kind of symbol. This is seen in test compiles
of watchdog drivers, which often use 'heartbeat' as ststic variable.
Since 'heartbeat' is an unfortunate name for a global function,
rename it to microblaze_heartbeat. Also rename the setup function
to microblaze_setup_heartbeat.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
This patch introduces a help function f2fs_has_inline_xattr for better
readability.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This adds the ability to set "clock-frequency" in the device tree for the at91
i2cbus following the naming of other i2c bus implementations. If the property
is not set,the clock frequency will default to the previously used define
of 100KHz.
Signed-off-by: Marek Roszko <mark.roszko@gmail.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
On Intel BayTrail, there was case whereby the resulting fast mode
bus speed becomes slower (~20% slower compared to expected speed)
if using the HCNT/LCNT calculated in the core layer. Thus, this
patch is added to allow pci glue layer to pass in optimal
HCNT/LCNT/SDA hold time values to core layer since the core
layer supports cofigurable HCNT/LCNT/SDA hold time values now.
Signed-off-by: Chew, Chiau Ee <chiau.ee.chew@intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
priv is not instantiated at gfar_of_init() time, when
parsing the DT for info on supported HW queues. Before
the netdev can be allocated, the number of supported
queues must be known. Because the number of supported
queues depends on device type, move the compatibility
checks before netdev allocation. Local vars are used
to hold the operation mode info before netdev allocation.
This fixes the null accesses for priv->.., in gfar_of_init.
Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The tx descriptor version of RTL8111B belong to RTL_TD_0.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following build problem with binutils-2.24
gcc -Wall -O2 -c -o bpf_jit_disasm.o bpf_jit_disasm.c
In file included from bpf_jit_disasm.c:25:0:
/usr/include/bfd.h:35:2: error: #error config.h must be included
before this header
#error config.h must be included before this header
This is similar to commit 3ce711a6ab
"perf tools: bfd.h/libbfd detection fails with recent binutils"
See: https://sourceware.org/bugzilla/show_bug.cgi?id=14243
CC: David S. Miller <davem@davemloft.net>
CC: Daniel Borkmann <dborkman@redhat.com>
CC: netdev@vger.kernel.org
Acked-by: Daniel Borkmann <dborkman@redhat.com>
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The rf233 and rf231 are sufficiently similar that we can treat
rf233 like rf231.
rf233 is missing some features that rf231 has, but we don't currently
make use of them so there's nothing to handle differently yet.
Should we add support in the future for rf231 *_NOCLK or SLEEP states,
or PAD_IO drive strength, exceptions will need to be made for rf233.
Signed-off-by: Thomas Stilwell <stilwellt@openlabs.co>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet says:
====================
pkt_sched: allow scheduling points
We have seen delays of more than 50ms in class or qdisc dumps, in case
device is under high TX stress, even with the prior 4KB per skb limit.
With the new 16KB limit, this could translate to 200ms delays.
Add cond_resched() to give a chance to higher prio tasks to get cpu.
But before doing so, we need to remove the rcu locking from tc_dump_qdisc()
as David spotted.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We have seen delays of more than 50ms in class or qdisc dumps, in case
device is under high TX stress, even with the prior 4KB per skb limit.
Add cond_resched() to give a chance to higher prio tasks to get cpu.
Signed-off-by; Eric Dumazet <edumazet@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Like all rtnetlink dump operations, we hold RTNL in tc_dump_qdisc(),
so we do not need to use rcu protection to protect list of netdevices.
This will allow preemption to occur, thus reducing latencies.
Following patch adds explicit cond_resched() calls.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit a998d43423 claimed to introduce negative offset support to x86 jit,
but it couldn't be working, since at the time of the execution
of LD+ABS or LD+IND instructions via call into
bpf_internal_load_pointer_neg_helper() the %edx (3rd argument of this func)
had junk value instead of access size in bytes (1 or 2 or 4).
Store size into %edx instead of %ecx (what original commit intended to do)
Fixes: a998d43423 ("bpf jit: Let the x86 jit handle negative offsets")
Signed-off-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Jan Seiffert <kaffeemonster@googlemail.com>
Cc: Eric Dumazet <edumazet@google.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Without this check someone could easily create a denial of service
by injecting multicast-specific queries to enable the bridge
snooping part if no real querier issuing periodic general queries
is present on the link which would result in the bridge wrongly
shutting down ports for multicast traffic as the bridge did not learn
about these listeners.
With this patch the snooping code is enabled upon receiving valid,
general queries only.
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
General IGMP and MLD queries are supposed to have the multicast
link-local all-nodes address as their destination according to RFC2236
section 9, RFC3376 section 4.1.12/9.1, RFC2710 section 8 and RFC3810
section 5.1.15.
Without this check, such malformed IGMP/MLD queries can result in a
denial of service: The queries are ignored by most IGMP/MLD listeners
therefore they will not respond with an IGMP/MLD report. However,
without this patch these malformed MLD queries would enable the
snooping part in the bridge code, potentially shutting down the
according ports towards these hosts for multicast traffic as the
bridge did not learn about these listeners.
Reported-by: Jan Stancek <jstancek@redhat.com>
Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Describe the return values of tracepoint_probe_register(), including
-ENODEV added by commit:
Author: Steven Rostedt <rostedt@goodmis.org>
tracing: Warn if a tracepoint is not set via debugfs
Link: http://lkml.kernel.org/r/1394499898-1537-2-git-send-email-mathieu.desnoyers@efficios.com
CC: Ingo Molnar <mingo@kernel.org>
CC: Frederic Weisbecker <fweisbec@gmail.com>
CC: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Apart from setting the limit of memblock, it's also useful to be able
to get the limit to avoid recalculating it every time. Add the function
to do so.
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Laura Abbott <lauraa@codeaurora.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
As multiplatform build is being adopted by more and more
ARM platforms, initcall function should be used very carefully.
For example, when SPEAr cpufreq driver is enabled on a kernel
booted on a non-SPEAr board, we will get following boot time error:
spear_cpufreq: Invalid cpufreq_tbl
To eliminate this undesired the effect, the patch changes SPEAr
driver to have it instantiated as a platform_driver. Then it will
only run on platforms that create the platform_device "spear-cpufreq".
This patch also creates platform node for SPEAr13xx boards.
Reported-by: Josh Cartwright <joshc@codeaurora.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We have used 'frozen' variable/function parameter at many places to
distinguish between CPU offline/online on suspend/resume vs sysfs
removals. We now have another variable cpufreq_suspended which can
be used in these cases, so we can get rid of all those variables or
function parameters.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
cpufreq_generic_exit() is empty now and can be deleted.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
freq table is not per CPU but per policy, so it makes more sense to
keep it within struct cpufreq_policy instead of a per-cpu variable.
This patch does it. Over that, there is no need to set policy->freq_table
to NULL in ->exit(), as policy structure is going to be freed soon.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Fix descriptions of /sys/power/state in the documentation and in
a code comment.
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
[rjw: Changelog]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Spelling fix.
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
With CONFIG_DYNAMIC_FTRACE=n, I see a warning:
kernel/trace/ftrace.c:240:13: warning: 'control_ops_free' defined but not used
static void control_ops_free(struct ftrace_ops *ops)
^
Move that function around to an already existing #ifdef
CONFIG_DYNAMIC_FTRACE block as the function is used solely from the
dynamic function tracing functions.
Link: http://lkml.kernel.org/r/1394484131-5107-1-git-send-email-jslaby@suse.cz
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
As described by a comment at the end of cpuidle_enter_state_coupled it
can be inefficient for coupled idle states to return with IRQs enabled
since they may proceed to service an interrupt instead of clearing the
coupled idle state. Until they have finished & cleared the idle state
all CPUs coupled with them will spin rather than being able to enter a
safe idle state.
Commits e1689795a7 "cpuidle: Add common time keeping and irq
enabling" and 554c06ba3e "cpuidle: remove en_core_tk_irqen flag" led
to the cpuidle_enter_state enabling interrupts for all idle states,
including coupled ones, making this inefficiency unavoidable by drivers
& the local_irq_enable near the end of cpuidle_enter_state_coupled
redundant. This patch avoids enabling interrupts in cpuidle_enter_state
after a coupled state has been entered, allowing them to remain disabled
until all coupled CPUs have exited the idle state and
cpuidle_enter_state_coupled re-enables them.
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
My guess is we aren't going to have a 2 digit cpuid here any time soon
but the static checkers don't know that and complain that the snprintf()
could overflow.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
When running applications which contain the instruction "prefx" on FPU-less
CPUs, a message "Illegal instruction" will be seen. This instruction is
supposed to be ignored by the FPU emulator. However, its current detection
and function field encoding are incorrect. This patch fix the issue.
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@imgtec.com>
Reviewed-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Reviewed-by: Paul Burton <paul.burton@imgtec.com>
Acked-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: Steven.Hill@imgtec.com
Patchwork: https://patchwork.linux-mips.org/patch/6608/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
The generic cpufreq-cpu0 driver can scale the CPU frequency on Zynq
SOCs. Add the required platform device to the BSP and appropriate
OPPs to the dts.
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: devicetree@vger.kernel.org
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
The timer frequency of the arm_global_timer depends on the CPU
frequency. With cpufreq altering that frequency the arm_global_timer
does not maintain a stable time base. Therefore don't enable that timer
in case cpufreq is enabled.
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
The currently used method adjusting the clocksource to a changing input
frequency does not work on kernels from 3.11 on.
The new approach is to keep the timer frequency as constant as possible.
I.e.
- due to the TTC's prescaler limitations, allow frequency changes
only if the frequency scales by a power of 2
- adjust the counter's divider on the fly when a frequency change
occurs
This limits cpufreq to scale by certain factors only.
But we may keep the time base somewhat constant, so that sleep() & co
keep working as expected, while supporting cpufreq.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
The timer core takes care of serialization and IRQs. Hence the driver is
no longer required to disable interrupts when calling
clockevents_update_freq().
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Add Kconfig entries for CMT, MTU2, TMU and STI to
drivers/clocksource/Kconfig. This will allow us to
get rid of duplicated entires in architecture code
such as arch/sh and arch/arm/mach-shmobile.
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Wolfram Sang <wsa@sang-engineering.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Now when drivers/clocksource/Kconfig has been
updated with entires for CMT, TMU and MTU2
it is safe to remove these from SH.
Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Wolfram Sang <wsa@sang-engineering.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Now when drivers/clocksource/Kconfig has been
updated with entires for CMT, TMU, MTU2, and STI
it is safe to remove these from mach-shmobile.
Also select timers per SoC via SYS_SUPPORTS_xxx.
Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Wolfram Sang <wsa@sang-engineering.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Replace the driver-specific thread-safe shared register API
by the recently introduced atomic_io_clear_set().
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Replace the driver-specific thread-safe shared register API
by the recently introduced atomic_io_clear_set().
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Tested-by: Willy Tarreau <w@1wt.eu>
Acked-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Commit 438e0bff5257 added the timer-keystone device driver but make use
of an unnecessary variable in the init function. This patch deletes this
variable.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Add broadcast clock-event device for the Keystone arch.
The timer can be configured as a general-purpose 64-bit timer,
dual general-purpose 32-bit timers. When configured as dual 32-bit
timers, each half can operate in conjunction (chain mode) or
independently (unchained mode) of each other.
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Santosh shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
