Commit graph

506,942 commits

Author SHA1 Message Date
Thomas Abraham
2107673e16 ARM: dts: add board dts file for EXYNOS4412 based Origen board
Add a minimal board dts file for EXYNOS4412 based Insignal Origen board.

Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-07 19:39:48 +09:00
Konstantin Khlebnikov
4e0855dff0 e1000e: fix pci-device enable-counter balance
This patch removes redundant and unbalanced pci_disable_device() from
__e1000_shutdown(). pci_clear_master() is enough, device can go into
suspended state with elevated enable_cnt.

Bug was introduced in commit 23606cf5d1
("e1000e / PCI / PM: Add basic runtime PM support (rev. 4)") in v2.6.35

Cc: Bruce Allan <bruce.w.allan@intel.com>
CC: Stable <stable@kernel.org>
Signed-off-by: Konstantin Khlebnikov <khlebnikov@openvz.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Borislav Petkov <bp@suse.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-03-07 02:27:25 -08:00
Vladimir Kondratiev
021fcdc13a cfg80211: fix inconsistency in trace for rdev_set_mac_acl
There is NETDEV_ENTRY that was incorrectly assigned as WIPHY_ASSIGN,
fix it.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-03-07 11:20:01 +01:00
Eric W. Biederman
9141770548 fs: Limit sys_mount to only request filesystem modules (Part 2).
Add missing MODULE_ALIAS_FS("ocfs2") how did I miss that?
Remove unnecessary MODULE_ALIAS_FS("devpts") devpts can not be modular.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-03-07 01:08:55 -08:00
Sebastian Ott
aebfa669d9 s390/scm: process availability
Let the bus code process scm availability information and
notify scm device drivers about the new state.

Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-03-07 09:52:24 +01:00
Sebastian Ott
4fa3c01964 s390/scm_blk: suspend writes
Stop writing to scm after certain error conditions such as a concurrent
firmware upgrade. Resume to normal state once scm_blk_set_available is
called (due to an scm availability notification).

Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-03-07 09:52:23 +01:00
Sebastian Ott
93481c9020 s390/scm_drv: extend notify callback
Extend the notify callback of scm_driver by an event parameter
to allow to distinguish between different notifications.

Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-03-07 09:52:21 +01:00
Sebastian Ott
8360cb5f38 s390/scm_blk: fix request number accounting
If a block device driver cannot fetch all requests from the blocklayer
it's in his responsibility to call the request function at a later time.
Normally this would be done after the next irq for the underlying device
is handled. However in situations where we have no outstanding request
we have to schedule the request function for a later time.

This is determined using an internal counter of requests issued to the
hardware.

In some cases where we give a request back to the block layer unhandled
the number of queued requests was not adjusted. Fix this class of
failures by adjusting queued_requests in all functions used to give
a request back to the block layer.

Reviewed-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2013-03-07 09:52:20 +01:00
Daniel Mack
2dad940219 ALSA: snd-usb-caiaq: fix smatch warnings
Fix three smatch warnings recently introduced:

sound/usb/caiaq/device.c:166 usb_ep1_command_reply_dispatch() warn:
  variable dereferenced before check 'cdev' (see line 163)
sound/usb/caiaq/device.c:517 snd_disconnect() warn: variable
  dereferenced before check 'card' (see line 514)
sound/usb/caiaq/input.c:510 snd_usb_caiaq_ep4_reply_dispatch() warn:
  variable dereferenced before check 'cdev' (see line 506)

Signed-off-by: Daniel Mack <zonque@gmail.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-07 09:24:12 +01:00
Kailang Yang
84dfd0ac23 ALSA: hda - Add support of new codec ALC233
It's compatible with ALC282.

Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-07 09:21:01 +01:00
Xi Wang
3bc085a12d ALSA: hda/ca0132 - Avoid division by zero in dspxfr_one_seg()
Move the zero check `hda_frame_size_words == 0' before the modulus
`buffer_size_words % hda_frame_size_words'.

Also remove the redundant null check `buffer_addx == NULL'.

Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-07 09:18:00 +01:00
Mengdong Lin
4c7a548a70 ALSA: hda - check NULL pointer when creating SPDIF PCM switch
If the new control cannot be created, this function will return to avoid
snd_hda_ctl_add dereferencing a NULL control pointer.

Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-07 09:14:03 +01:00
Mengdong Lin
25336e8ae2 ALSA: hda - check NULL pointer when creating SPDIF controls
If the SPDIF control array cannot be reallocated, the function
will return to avoid dereferencing a NULL pointer.

Signed-off-by: Mengdong Lin <mengdong.lin@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-03-07 09:12:14 +01:00
Takashi Iwai
9fedcc44f1 ASoC: Updates for v3.9
A few driver fixes, none of them terribly dramatic.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRODXDAAoJELSic+t+oim9z1MP/iCk4Ds13FXXziBcB52s3JT4
 18HXnol98a905tMPMgsqaaZPIrb9nm/9unqwg4OKK4c7pDsJLURcCX6e+YEmaie+
 auOsEZiL6qILurVg9PE60EhVZPOraXsYk7Qf7L0qW0stEvLB/Ug2/Ate8fhbY/dI
 1zUeePUaX6nFuSDQbbkKfahZs3zLGmOMEJC0s2eCoKq7kHlPOx0whuZ3lKCSMywR
 +xtGBFl7uDQ/zcbGdtd6Y5i3AodU4B6lORZLpN+TCibw/d0jq2OtcdPRTD7ur/av
 yqohnGEAIwGB1QuiE02c+QS9A/Q17vxF35g3unjKc/r6Xviv1wi2GttMmnfKXbg8
 zhTN5g69gqIhKE+DGqRy0TyTVOnF9g0/xe9Y2tU8UOYRr0XjMD6Y9yHu6fQIWVOf
 j90xWhrMrgO4NOU1OZj4wiaVT3S65VnVrc+5RqRdjjorlfJL+M2VJlWI8amYi8aH
 /6p0PdA6/FbqWhryAf9VRYjjov7VS3YyPzWYQZLBEE60exsH+DxRlxlB1WRkaJoi
 Wt5Ao47HZ8dsO2F1dyX7RV8bCNrzSRNcG68XWqIiI6d66eaY+um4sDuRijyOacsn
 wRTSg/CUvFv44y/BFKyffQuU8ytPvSCuHLeKUNVkgw0vpPwkhwSokDuRxuPRkJ8X
 ik+00/YdCE4xN7vg34AB
 =Yton
 -----END PGP SIGNATURE-----

Merge tag 'asoc-v3.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v3.9

A few driver fixes, none of them terribly dramatic.
2013-03-07 09:11:22 +01:00
Maxime Ripard
ee341a99de pinctrl: sunxi: Add Allwinner A13 pin functions
The initial driver contained only a limited set of pins functions
because we lacked of documentation on it.

Now that we have such documentation, finish to fill the array.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-07 09:05:14 +01:00
Maxime Ripard
b5f50bf923 pinctrl: sunxi: Add Allwinner A10 pin functions
The initial driver contained only a limited set of pins functions
because we lacked of documentation on it.

Now that we have such documentation, finish to fill the array.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-03-07 09:02:34 +01:00
Inderpal Singh
9f37067429 ARM: EXYNOS: Add support for rtc wakeup
Set the gic arch extension callback to support rtc wakeup.

Signed-off-by: Inderpal Singh <inderpal.singh@linaro.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-07 16:27:59 +09:00
Sylwester Nawrocki
30da66eafc ARM: SAMSUNG: Export MIPI CSIS/DSIM PHY control functions
The s5p_csis_phy_enable/s5p_dsim_phy_enable functions are now used
directly by corresponding drivers and thus need to be exported so
the drivers can be built as modules.

Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-03-07 16:27:18 +09:00
Mark Brown
f73c06dc2c Merge remote-tracking branch 'asoc/fix/wm8960' into tmp 2013-03-07 14:29:43 +08:00
Mark Brown
de83fb38df Merge remote-tracking branch 'asoc/fix/wm8350' into tmp 2013-03-07 14:29:40 +08:00
Mark Brown
25e5a7441f Merge remote-tracking branch 'asoc/fix/tegra' into tmp 2013-03-07 14:29:39 +08:00
Mark Brown
e61c09249a Merge remote-tracking branch 'asoc/fix/arizona' into tmp 2013-03-07 14:29:27 +08:00
Lee Jones
b09f86dbfc ab8500-charger: Do not use [delayed_]work_pending()
There's no need to test whether a (delayed) work item is pending
before queueing, flushing or cancelling it.  Most uses are unnecessary
and quite a few of them are buggy.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-03-07 12:35:59 +08:00
lme00437
0577610e0e ab8500-fg: Change current calculation
This patch updates the gas gauge constant for electric current
calculation according to hardware specification.

Signed-off-by: Benoit GAUTHIER <benoit.gauthier-xsig@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com>
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
Tested-by: Benoit GAUTHIER <benoit.gauthier-xsig@stericsson.com>
2013-03-07 12:35:59 +08:00
Lee Jones
4d3b4aa58a abx500-chargalg: Add charging current step interface
To prevent overheating, provide differnt steps of charging current
interface to allow thermal mitigation. This will provide possibility
to reduce gradually the charging current.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-03-07 12:35:58 +08:00
Rupesh Kumar
9b7f50e3ea pm2301-charger: Reference put missing after access
Added missing pm_runtime_put_sync in read & write.

Signed-off-by: Rupesh Kumar <rupesh.kumar@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Sandeep TRIPATHY <sandeep.tripathy@stericsson.com>
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
2013-03-07 12:35:57 +08:00
Rupesh Kumar
b64f51c4ad pm2301-charger: Wake device on register access
When USB  Dedicated or Standard host chargers are plugged into
the device, chargealg attempts to disable the PM2301 AC charger,
However, disabling PM2301 was failing because of it being in
runtime suepend mode & LPN pin being low.

Signed-off-by: Rupesh Kumar <rupesh.kumar@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com>
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
2013-03-07 12:35:57 +08:00
Marcus Cooper
7a2cf9bacf ab8500-bm: Trivially fix up some incorrect and out-of-date comments
Some of the comments in the ab8500 drivers reflect the behaviour
of the original device. As this driver now supports newer devices
then these comments are now redundant. Also some IRQ comments are
incorrect.

Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
Tested-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2013-03-07 12:35:56 +08:00
Rupesh Kumar
0f80ba6318 pm2301-charger: Charging LED control for pm2301
The LED Indicator feature allows indicating through a led when the
PM2301 battery charging is active. SW shall not disable this LED.

Signed-off-by: Rupesh Kumar <rupesh.kumar@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com>
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
2013-03-07 12:35:55 +08:00
lme00437
a21e22f2f3 pm2301-charger: lpn pin used only in C2C boards
This patch restricts use of LPN pin to C2C boards to avoid
conflict on HSI for GPIO 60 use.

Signed-off-by: Benoit GAUTHIER <benoit.gauthier-xsig@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Mustapha BEN-ZOUBEIR <mustapha.ben.zoubeir-xsig@stericsson.com>
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
Tested-by: Benoit GAUTHIER <benoit.gauthier-xsig@stericsson.com>
2013-03-07 12:35:55 +08:00
Lee Jones
3c01b3676f ab8500-charger: Remove duplicate code
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-03-07 12:35:54 +08:00
srinidhi kasagar
1ee26af028 abx500-chargalg: Use module_platform_driver() rather
deprecate some boilerplate code by using module_platform_driver
helper macro. No functional changes.

Signed-off-by: srinidhi kasagar <srinidhi.kasagar@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-03-07 12:35:53 +08:00
Rupesh Kumar
f70dfdec99 pm2301-charger: Removed unused code from PM2301 driver
Some of the headers and defines accrued over time are no longer
in use. Let's take the opportunity to remove a few of them.

Signed-off-by: Rupesh Kumar <rupesh.kumar@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com>
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
2013-03-07 12:35:53 +08:00
Rabin Vincent
261c5136fa ab8500-charger: Run detect workaround only on AB8500
Only AB8500 has this hardware bug, so these works only need to be run
there.

Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com>
Reviewed-by: Martin SJOBLOM <martin.w.sjoblom@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2013-03-07 12:35:52 +08:00
Lee Jones
aee2b8468c pm2301-charger: Add pm_runtime_resume & pm_runtime_suspend
To optimize the current consumption we use pm_runtime autosuspend
functions which execute the pm_runtime_suspend after a delay of
inactivity on the other hand we use pm_runtime_resume every time
we receive an interruption to wake up the pm2301.

Signed-off-by: M BenZoubeir <mustapha.ben.zoubeir-xsig@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
2013-03-07 12:35:51 +08:00
M BenZoubeir
f4095a0f06 pm2301-charger: Adjust interrupt handler behavior
Signed-off-by: M BenZoubeir <mustapha.ben.zoubeir-xsig@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
2013-03-07 12:35:51 +08:00
Marcus Cooper
b3ea5f451e ab8500-charger: Add UsbLineCtrl2 reference
When the state of USB Charge detection is changed then the calls
use a define for another register in other bank. This change
creates a new define for the correct register and removes the
magic numbers that are present.

Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Hakan BERG <hakan.berg@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2013-03-07 12:35:50 +08:00
Lee Jones
257107ae6b ab8500-chargalg: Use hrtimer
Timers used for charging safety and maintenance must work even when
CPU power has collapsed. By using hrtimers with the realtime clock
the system is able to trigger an alarm that wakes-up the CPU and makes
it possible to handle events.

Allow a little slack time of 5 minutes for the hrtimers to allow CPU
to be woken-up in a more optimal power saving way. A 5 minute delay
to time-out timers relative to hours does not impact on safety.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-03-07 12:35:49 +08:00
Lee Jones
eaded808c9 abx500-chargalg: Prevent the watchdog from being kicked twice
Charging watchdog kicker work-thread gets started twice causing
'failed to kick watchdog' message after removing charger and
when re-inserting charger. This patch removes the superfluous
start of watchdog kicker-thread.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-03-07 12:35:49 +08:00
Marcus Cooper
88efdb8022 ab8500-charger: Use USBLink1Status Register
The newer AB's such as the AB8505, AB9540 etc include a
USBLink1 Status register which detects a larger range of
external devices. This should be used instead of the
USBLine Status register.

Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Hakan BERG <hakan.berg@stericsson.com>
Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
Tested-by: Yang QU <yang.qu@stericsson.com>
2013-03-07 12:35:48 +08:00
Lee Jones
861a30da53 ab8500-bm: Add support for the new ab8540 platform
Provide AB8540 platform specific information required to run the
Battery Management subsystem on AB8540 based devices. For this to
happen we see the introduction of separate platform specific data
structures and a means in which to process them.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-03-07 12:35:48 +08:00
Rupesh Kumar
2c4c40ac00 ab8500-btemp: Defer btemp filtering while initialising
Due to btemp filtering enabled during init, temp values reported
to charge algorithm driver started from 0. As a result,charge
algorithm was going into wrong state and charging was stopped.

Signed-off-by: Rupesh Kumar <rupesh.kumar@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com>
Reviewed-by: Martin SJOBLOM <martin.w.sjoblom@stericsson.com>
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
2013-03-07 12:35:47 +08:00
Lee Jones
db43e6c473 ab8500-bm: Add usb power path support
AB8540 supports power path function in USB charging mode for fast
power up with dead and weak battery, and it could extend
the battery age.

When USB charging starts, if the Vbattrue is below than SW cut off
voltage, power path and pre-charge should be enabled. If Vbattrue
is higher than SW cut off voltage, power path and pre-charge should
be disabled. This is to make sure full current to battery charge.
At the end of charge, power path should be enable again to reduce
charging the battery again.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-03-07 12:35:46 +08:00
Marcus Cooper
405fea1c66 pm2301-charger: Always compile the PM2301 Charger driver with AB8500 Battery Mgnt
The PM2301 Charger should always be available when using the AB8500
Battery Management system, we're ensuring this will be the case.

Signed-off-by: Marcus Cooper <marcus.xm.cooper@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Hakan BERG <hakan.berg@stericsson.com>
Reviewed-by: Mian Yousaf KAUKAB <mian.yousaf.kaukab@stericsson.com>
2013-03-07 12:35:46 +08:00
Hakan Berg
d4337660d0 ab8500-charger: Add AB8505_USB_LINK_STATUS
The AB8505 does not have the same address for USB link-status
as has ab8500. Add AB8505_USB_LINK_STATUS and code to switch
to correct constant.

Signed-off-by: Hakan Berg <hakan.berg@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Mian Yousaf KAUKAB <mian.yousaf.kaukab@stericsson.com>
Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com>
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2013-03-07 12:35:45 +08:00
Hakan Berg
642776182c ab8500-fg: Allow capacity to raise from 1% when charging
When battery capacity was going below 1% fg is not supposed
to report 0% unless we've got the LOW_BAT IRQ, no matter
what the FG-algorithm says. This made fg get stuck at 1% if
charger is connected when capacity is 1%.

Signed-off-by: Hakan BERG <hakan.berg@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com>
Reviewed-by: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
2013-03-07 12:35:44 +08:00
Hakan Berg
908fe8d6a5 ab8500-btemp: Filter btemp readings
Battery tempreature readings sometimes fail and results in
a value far from recent values. This patch adds a software
filter that disposes such readings, by allowing direct
updates on temperature only if two samples result in the
same temperature. Else only allow 1 degree change from previous
reported value in the direction of the new measurement.

Signed-off-by: Hakan Berg <hakan.berg@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Marcus COOPER <marcus.xm.cooper@stericsson.com>
Reviewed-by: Martin SJOBLOM <martin.w.sjoblom@stericsson.com>
Reviewed-by: Rabin VINCENT <rabin.vincent@stericsson.com>
2013-03-07 12:35:44 +08:00
Rupesh Kumar
d4f510f6c3 pm2301-charger: Wake system when ext charger is plugged-in
When in suspend state, upon plug-in of external AC charger the
device needs to wake-up and charging operation started.

Signed-off-by: Rupesh Kumar <rupesh.kumar@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
2013-03-07 12:35:43 +08:00
Rupesh Kumar
da9e83d496 pm2301-charger: Die temp thermal protection
This patch adds support for die temperature thermal protection
in pm2301 driver.

Signed-off-by: Rupesh Kumar <rupesh.kumar@stericsson.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Hakan BERG <hakan.berg@stericsson.com>
Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
2013-03-07 12:35:42 +08:00
Lee Jones
f7470b5d24 ab8500_charger: Prevent auto drop of VBUS
Do not set higher current in stepping functionality if VBUS is dropping.
After VBUS has dropped try to set current once again. If dropping again
then we have found the maximum capability of the charger.

Signed-off-by: Lee Jones <lee.jones@linaro.org>
2013-03-07 12:35:42 +08:00