This patch enables suspend and resume mode for the power management, and
it is based on Josef Ahmad's previous work.
Reviewed-by: Hock Leong Kweh <hock.leong.kweh@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Weike Chen <alvin.chen@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch enables 'debounce' for the designware GPIO, and
it is based on Josef Ahmad's previous work.
Reviewed-by: Hock Leong Kweh <hock.leong.kweh@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Weike Chen <alvin.chen@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Synopsys DesignWare APB GPIO driver only supports open firmware devices.
But, like Intel Quark X1000 SOC, which has a single PCI function exporting
a GPIO and an I2C controller, it is a Multifunction device. This patch is
to enable the current Synopsys DesignWare APB GPIO driver to support the
Multifunction device which exports the designware GPIO controller.
Reviewed-by: Hock Leong Kweh <hock.leong.kweh@intel.com>
Signed-off-by: Weike Chen <alvin.chen@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We are trying to smoke out the use of the return value from
gpiochip_remove() from the kernel, this has been missed.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Some drivers accidentally still use the return value from
gpiochip_remove(). Get rid of them so we can simplify this function
and get rid of the return value.
Cc: Abdoulaye Berthe <berthe.ab@gmail.com>
Acked-by: Alexandre Courbot <acourbot@nvidia.com>
Acked-by: Javier Martinez Canillas <javier@dowhile0.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Some drivers accidentally still use the return value from
gpiochip_remove(). Get rid of them so we can simplify this function
and get rid of the return value.
Cc: Abdoulaye Berthe <berthe.ab@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
MX6 processors also use the IMX_SDMA driver, so include it in the help text.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
When we fail to allocate memory for thread->srcs or thread->dsts and src_cnt or
dst_cnt great than 1 we leak memory on error path. This patch fixes the issue.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Fix checkpatch.pl "open brace '{' following struct go on the same line" errors
Signed-off-by: Greg Donald <gdonald@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The following patch fixes the checkpatch.pl warning:
WARNING: line over 80 characters.
Signed-off-by: Aybuke Ozdemir <aybuke.147@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes following checkpatch.pl warning using coccinelle:
WARNING: else is not generally useful after a break or return
Semantic patch used for this is as follows:
@rule1@
expression e1;
@@
if (e1) { ... return ...; }
- else{
...
- }
@rule2@
expression e2;
statement s1;
@@
if(e2) { ... return ...; }
- else
s1
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes following checkpatch.pl warning using coccinelle:
WARNING: else is not generally useful after a break or return
Semantic patch used for this is as follows:
@rule1@
expression e1;
@@
if (e1) { ... return ...; }
- else{
...
- }
@rule2@
expression e2;
statement s1;
@@
if(e2) { ... return ...; }
- else
s1
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The GOTO macro is neither standard in Linux nor does its definiton
contain much useful code. Hence GOTO can be replaced with useful
parts of its definition. In a statement like GOTO(label, rc), the
replacing code will be goto label if rc is a constant or a variable.
But in cases like GOTO(label, e) where e is an assignment statement,
both assignment and goto statements are kept.
This patch was done using Coccinelle and the following semantic
patch was used:
@@
identifier rc,label;
expression e;
constant c;
@@
(
-GOTO(label,rc = e);
+rc = e;
+goto label;
|
-GOTO(label,rc);
+goto label;
|
-GOTO(label,c);
+goto label;
)
Signed-off-by: Tina Johnson <tinajohnson.1234@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch merge two lines in a single line if immediate return is found.
Unused variables in each case were removed manually as they are no longer
needed.
This is done using Coccinelle. Semantic patch used for this is as
follows :
@@
expression ret;
identifier f;
@@
-ret =
+return
f(...);
-return ret;
Signed-off-by: Tapasweni Pathak <tapaswenipathak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes checkpatch.pl warning in file rtl871x_ioctl.h
WARNING : Missing space after return type
Signed-off-by: Tapasweni Pathak <tapaswenipathak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes checkpatch.pl warning in files of rtl8712
WARNING : line over 80 characters
Signed-off-by: Tapasweni Pathak <tapaswenipathak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The SoC data structure allocated at init time only holds a regulator
pointer that is only used in the init function. Replace it with a local
variable and get rid of the SoC data structure allocation altogether.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch fixes checkpatch.pl warning in files of rtl8712
WARNING : void function return statement are not generally useful
Signed-off-by: Tapasweni Pathak <tapaswenipathak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes checkpatch.pl warning in rtl871x_mp.h file
WARNING : Macro should not use a trailing semicolon
Signed-off-by: Tapasweni Pathak <tapaswenipathak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes these warning messages found by checkpatch.pl:
WARNING : Missing a blank line after declarations.
Signed-off-by: Aybuke Ozdemir <aybuke.147@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes checkpatch.pl warning in rtl871x_ioctl_linux.c file
WARNING : break is not useful after goto or return
Signed-off-by: Tapasweni Pathak <tapaswenipathak@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The berlin_pinctrl_dt_free_map function tries to free memory
allocated and handled by the of subsystem. This is wrong and
already handled by pinctrl_dt_free_maps() which calls
of_node_put().
This patch fixes the Berlin pinctrl way of freeing its maps,
avoiding a kernel BUG(), by using the common
pinctrl_utils_dt_free_map function instead.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Disable Pull-Down or Pull-Up property before enabling Pull-Up or
Pull-Down, because the pin's Pull-Up and Pull-Down property is
mutually exclusive.
Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This reverts commit f2267089ea.
That commit causes more problem than fixes. Firstly, kfree()
should be called after usb_ep_dequeue() and secondly, the way
things are, we will try to dequeue a request that has already
completed much more frequently than one which is pending.
Cc: Li Jun <b47624@freescale.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Cc: stable <stable@vger.kernel.org> # 3.17
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When returning from a debug exception taken from EL1, we unmask debug
exceptions after handling the exception. This is crucial for debug
exceptions taken from EL0, so that any kernel work on the ret_to_user
path can be debugged by kgdb.
However, when returning back to EL1 the only thing left to do is to
restore the original register state before the exception return. If
single-step has been enabled by the debug exception handler, we will
get stuck in an infinite debug exception loop, since we will take the
step exception as soon as we unmask debug exceptions.
This patch avoids unmasking debug exceptions on the debug exception
return path when the exception was taken from EL1.
Fixes: 2a2830703a (arm64: debug: avoid accessing mdscr_el1 on fault paths where possible)
Cc: <stable@vger.kernel.org> #3.16+
Reported-by: David Long <dave.long@linaro.org>
Reported-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The direction passed to the device_prep_slave_sg, device_prep_dma_cyclic
or device_prep_interleaved_dma (through struct dma_interleaved_template)
should be used instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
In the brcmf_count_20mhz_channels function we are looping through a list
of channels received from firmware. Since the index of the first channel
is 0 the condition leads to an off by one bug. This is causing us to hit
the WARN_ON_ONCE(1) calls in the brcmu_d11n_decchspec function, which is
how I discovered the bug.
Introduced by:
commit b48d891676
("brcmfmac: rework wiphy structure setup")
Acked-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Emil Goode <emilgoode@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
The driver is capable of supporting DMA_INTERRUPT by issuing a dummy 128-byte
transfer. This helps removing a poll in the async_tx stack, replacing it with
a completion interrupt.
Signed-off-by: Lior Amsalem <alior@marvell.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
The driver currently defines the USE_TIMER macro, but the timer-feature
is never used in the code. The XOR and CRC32 results are never used.
The 'unmap_xxx' fields are no longer needed, they were made obsolete
in commit: 54f8d501e8 dmaengine: remove DMA unmap from drivers.
Let's remove all this dead code.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
This commit unmasks the end-of-chain interrupt and removes the
end-of-descriptor command setting on all transactions, except those
explicitly flagged with DMA_PREP_INTERRUPT.
This allows to raise an interrupt only on chain completion, instead of
on each descriptor completion, which reduces interrupt count.
Signed-off-by: Lior Amsalem <alior@marvell.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
This commit replaces the current magic numbers in the interrupt handling
with proper macros, which makes more readable and self-documenting.
While here replace the BUG() with a noisy WARN_ON(). There's no reason
to tear down the entire system for an DMA IRQ error.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Although the driver supported multiple-slot allocation, only one slot was
ever allocated for each transaction. So, given we have no users of the
multi-slot support, we can remove it and greatly simplify the code.
Signed-off-by: Lior Amsalem <alior@marvell.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
A memory copy operation can be expressed as an XOR operation with one
source. This commit removes code duplication in the driver by reusing
the XOR operation for the MEMCPY.
As an added benefit, we can now put MEMCPY and XOR descriptors on the
same chain, which improves performance.
Signed-off-by: Lior Amsalem <alior@marvell.com>
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
This commit replaces a printk(KERN_INFO ...) call with a dev_info() call,
which is prefered for drivers.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
This patch removes a call to panic function when gpiochio_irqchip_add
fails and just returns the error to the calling function.
Same return value is used to handle the error case and adds a lable
to release resources on error.
The error message has been improved to indicate failure to add irqchip
to gpiochip.
This also changes first argument to function at91_gpio_of_irq_setup from
struct device_node to struct platform_device. Because The device_node
argument was anyway not being used. Passed pdev so that on failure dev_err
can use &pdev->dev and log can be associated with proper device.
CC: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
CC: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This fixes the whole error handling in probe function by capturing and
returning error values on kernel function like clk_prepare,
clk_enable, gpiochip_add etc.
CC: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
CC: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Pramod Gurav <pramod.gurav@smartplayin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Otherwise we may fail to init the second compute ring.
Noticed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
This patch fixes the error print invalid resource for the APM X-Gene
SoC AHCI SATA Host Controller driver. This print was due to the fact
that the controller 3 don't have a mux resource. This didn't result
in any errors but the print seems like meaningless.
Signed-off-by: Loc Ho <lho@apm.com>
Signed-off-by: Suman Tripathi <stripathi@apm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The return value is not used by callers of these functions nor
by uses of all macros so change the functions to return void.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
fixed sparse warning of incorrect type (different address spaces) in
cthw20k1.c and cthw20k2.c which was being actually caused as mem_base
was of the type unsigned long.
Again as mem_base was previously unsigned long , so it required many
typecasts in the code to convert interger to pointer.
Now after giving the correct type of mem_base as void __iomem *
we can also remove those typecasts maintaining the same functionality
and logic of the code.
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
If one input has a boost and another one has not, and they're equal
otherwise, it's more likely you want to use the input with the boost
as your primary input.
See hda-emu.git/codecs/canonical/cx20590-lenovo-20b2z00bus-ccert-201305-13496
for an example.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The next patch will use it, so make it visible across modules.
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
