We may reach this point while the machine is still runtime suspended,
so we'll hit a WARN. The other encoders also don't touch registers at
this point, so instead of waking the machine up, write some code to
keep the register always at the same state, including after we runtime
suspend/resume.
Testcase: igt/pm_rpm
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80463
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Just like we do for the other encoders. This should fix some WARNs
when running pm_rpm on SNB.
Testcase: igt/pm_rpm
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80463
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Just like we already do in haswell_get_pipe_config(). This should
prevent some WARNs when we run pm_rpm on SNB.
Testcase: igt/pm_rpm
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80463
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Since we now have support for shared DPLLS.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
To be able to do this we need to separately keep track of how many
crtcs need a given WRPLL and how many actually actively use it. The
common shared dpll framework already has all this, including massive
state readout and cross checking. Which allows us to do this switch in
a fairly small patch.
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Mostly this patch is one big excersize in deleting code and asserts
which are no longer needed. Note that we still abuse the shared dpll
framework a bit since we call the enable/disable functions from the
crtc mode_set and off hooks. But changing the actual hardware sequence
will be done in the next step.
Note that besides the massive amount of changes in this patch the
places and order in which the low-level WRPLL code is called is
absolutely unchanged.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[imre: rebased on patchset version w/o pch/crt/fdi refactoring]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This time around another cute hack to pre-fill the pll->hw_state with
the right values. And also remove a bunch of checks which will be
replaced by lots more checks in the common framework.
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Currently still with a redudant WARN_ON in there, the common shared
dpll code will take care of this in the future.
Also we need to flip the switch for the transitional hack now to make
sure that we disable the right pll.
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Still tacked onto the side, but slowly getting there.
v2: Don't forget the debugfs file.
v3 (from Paulo): Don't forget to check the power domains.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
And get/put it when needed. The special thing about this commit is
that it will now return false in ibx_pch_dpll_get_hw_state() in case
the power domain is not enabled. This will fix some WARNs we have when
we run pm_rpm on SNB.
Testcase: igt/pm_rpm
Bugzilla:https://bugs.freedesktop.org/show_bug.cgi?id=80463
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Just filing in names and ids, but not yet officially registering them
so that the hw state cross checker doesn't completely freak out about
them. Still since we do already read out and cross check
config->shared_dpll the basics are now there to flesh out the wrpll
shared dpll implementation.
The idea is now to roll out all the callbacks step-by-step and then at
the end switch to the shared dpll framework. This way hw and sw
changes are clearly separated.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[imre: added const to hsw_ddi_pll_names (Damien)]
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This way only the dynamic WRPLL selection for hdmi ddi mode is
done in intel_ddi_pll_select.
v2: Don't clobber the precomputed values when selecting clocks fro
hdmi encoders.
v3 (from Paulo): Rebase on top of the s/IS_HASWELL/HAS_DDI/ patch.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Paulo Zanoni <przanoni@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Don't let it fall in the HAS_PCH_SPLIT() case.
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
To make things a bit more manageable extract a new function for
reading out common ddi port state. This means a bit of duplication
between encoders and the core since both look at the same registers,
but doesn't seem worth to make a fuzz about.
We can also remove the state readout code in intel_ddi_setup_hw_pll_state.
That code is only called from the hardware take over and not the cross
check code, and only after the crtc state is reconstructed. So we can
rely on an accurate value of crtc->config.ddi_pll_sel already.
Compared to the old code also trust the hw state more and don't
special-case port A - we want to cross-check the actual-state, not
bake in our own assumptions about how this is supposed to all be
linked up.
v2: Make use of the read-out ddi_pll_sel in intel_ddi_clock_get.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[imre: rebased on patchset version w/o pch/crt/fdi refactoring]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Just boring sed job for preparation.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Damien Lespiau <damien.lespiau@intel.com>
[imre: rebased on patchset version w/o pch/crt/fdi refactoring]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Similar to how the ->crtc_mode_set hook should touch the hardware to
enable anything the ->crtc_off hook should disable anything in the
hardware. Otherwise runtime pm for dpms will not work.
Currently the only things left int the haswell_crtc_off hook is
disabling the ddi plls. We can't move the WRPLL enabling out yet
because the current ddi pll sharing code used by the haswell code
doesn't separately track active users and overall users. This must be
fixed by porting it to the generic shared display pll framework, which
is powerful enough.
But the SPLL source is only used by the crt encoder and so can be
moved already. We only need to make sure that the ddi port E is
already off, which hsw_fdi_disable does by calling
intel_ddi_post_disable.
With this the code reorg to shuffle hsw fdi/lpt specific code into a
new hsw-specific crt encoder type is now finally complete.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[imre: rebased on patchset version w/o pch/crt/fdi refactoring]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
The call to intel_ddi_pll_enable in haswell_crtc_mode_set is the only
function that still touches the hardware state from the crtc mode_set
callback on hsw. Since the SPLL isn't ever shared we can easily take
it out into the hsw crt encoder functions.
Temporarily we'll loose a bit of WARN_ON coverage with this, but once
the WRPLLs are switched over that will be restored. For the SPLL
selection add a WARN in the hsw fdi link training code.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[imre: rebased on patchset version w/o pch/crt/fdi refactoring]
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is needed by an upcoming patch that moves the PCH/CRT PLL disabling
into the post_disable hook, after which we want to keep the modeset
sequence at its current state. At this point this won't have an effect
since the PCH/CRT post_disable hook is atm a NOP.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
This is needed by an upcoming patch that moves the PCH/CRT PLL enabling
into the pre_enable hook, after which we want to keep the modeset
sequence at its current state. At this point this won't have an effect
since the PCH/CRT pre_enable hook is atm a NOP.
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Luckily the bit definitions match, but it's still confusing
to use one when handling the other. So sprinkle some OCD over
the #defines to make them match and use the right version in
each place.
Maybe we should unify these definitions completely, but that
can always be done sometime in the future.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
SPLL would be a reference clock we could potentially share,
especially if we want to use the SSC mode. But currently we
don't, so let's rip out this complexity for a simpler conversion
to the new display pll framework.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
All the other checks also check hw state, so checking our software
refcounts for the plls looks a bit odd. Also this will simplify the
conversion over to the shared dpll framework, which itself has massive
amounts of checks to make sure that we never leave a display pll
enabled when we shouldn't.
So after that conversion we should stil have a good enough coverage of
asserts for entering pc8/runtime pm on hsw/bdw.
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
To properly re-initialize SR-IOV it is necessary to reset the device
even if it is already down. Not doing this may result in Tx unit hangs.
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jamal Hadi Salim says:
====================
bridge: fdb dumping takes a filter device
v7:
Vxlan driver was not updated with new API. Found by DaveM
v6:
Missed checkpatch > 80 chars lines found by Varka Bhadram
v5:
Embarassing qlnic compile failure found by DaveM
v4:
Request from DaveM to use proper comment tagging and remove if-stmnt braces
V3:
Suggestion from Eric D. to use for_each_netdev
Suggestion from Stephen H. to reduce level of indentation
V2:
Suggestions from Vlad
Get rid of rcu read lock since rtnl_lock is being held
simplify for readability
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Actually better than brctl showmacs because we can filter by bridge
port in the kernel.
The current bridge netlink interface doesnt scale when you have many
bridges each with large fdbs or even bridges with many bridge ports
And now for the science non-fiction novel you have all been
waiting for..
//lets see what bridge ports we have
root@moja-1:/configs/may30-iprt/bridge# ./bridge link show
8: eth1 state DOWN : <BROADCAST,MULTICAST> mtu 1500 master br0 state
disabled priority 32 cost 19
17: sw1-p1 state DOWN : <BROADCAST,NOARP> mtu 1500 master br0 state
disabled priority 32 cost 100
// show all..
root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show
33:33:00:00:00:01 dev bond0 self permanent
33:33:00:00:00:01 dev dummy0 self permanent
33:33:00:00:00:01 dev ifb0 self permanent
33:33:00:00:00:01 dev ifb1 self permanent
33:33:00:00:00:01 dev eth0 self permanent
01:00:5e:00:00:01 dev eth0 self permanent
33:33:ff:22:01:01 dev eth0 self permanent
02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent
00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent
00:17:42:8a:b4:07 dev eth1 self permanent
33:33:00:00:00:01 dev eth1 self permanent
33:33:00:00:00:01 dev gretap0 self permanent
da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent
33:33:00:00:00:01 dev sw1-p1 self permanent
//filter by bridge
root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0
02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent
00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent
00:17:42:8a:b4:07 dev eth1 self permanent
33:33:00:00:00:01 dev eth1 self permanent
da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent
33:33:00:00:00:01 dev sw1-p1 self permanent
// bridge sw1 has no ports attached..
root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br sw1
//filter by port
root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show brport eth1
02:00:00:12:01:02 vlan 0 master br0 permanent
00:17:42:8a:b4:05 vlan 0 master br0 permanent
00:17:42:8a:b4:07 self permanent
33:33:00:00:00:01 self permanent
// filter by port + bridge
root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0 brport
sw1-p1
da:ac:46:27:d9:53 vlan 0 master br0 permanent
33:33:00:00:00:01 self permanent
// for shits and giggles (as they say in New Brunswick), lets
// change the mac that br0 uses
// Note: a magical fdb entry with no brport is added ...
root@moja-1:/configs/may30-iprt/bridge# ip link set dev br0 address
02:00:00:12:01:04
// lets see if we can see the unicorn ..
root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show
33:33:00:00:00:01 dev bond0 self permanent
33:33:00:00:00:01 dev dummy0 self permanent
33:33:00:00:00:01 dev ifb0 self permanent
33:33:00:00:00:01 dev ifb1 self permanent
33:33:00:00:00:01 dev eth0 self permanent
01:00:5e:00:00:01 dev eth0 self permanent
33:33:ff:22:01:01 dev eth0 self permanent
02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent
00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent
00:17:42:8a:b4:07 dev eth1 self permanent
33:33:00:00:00:01 dev eth1 self permanent
33:33:00:00:00:01 dev gretap0 self permanent
02:00:00:12:01:04 dev br0 vlan 0 master br0 permanent <=== there it is
da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent
33:33:00:00:00:01 dev sw1-p1 self permanent
//can we see it if we filter by bridge?
root@moja-1:/configs/may30-iprt/bridge# ./bridge fdb show br br0
02:00:00:12:01:02 dev eth1 vlan 0 master br0 permanent
00:17:42:8a:b4:05 dev eth1 vlan 0 master br0 permanent
00:17:42:8a:b4:07 dev eth1 self permanent
33:33:00:00:00:01 dev eth1 self permanent
02:00:00:12:01:04 dev br0 vlan 0 master br0 permanent <=== there it is
da:ac:46:27:d9:53 dev sw1-p1 vlan 0 master br0 permanent
33:33:00:00:00:01 dev sw1-p1 self permanent
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dumping a bridge fdb dumps every fdb entry
held. With this change we are going to filter
on selected bridge port.
Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use filp_close instead of open coding. filp_close does a bit more than
just release the locks and put the filp. It also calls ->flush and
dnotify_flush, both of which should be done here anyway.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Preparation for removal of the client_mutex, which currently protects
this array. While we don't actually need the find_*_file_locked variants
just yet, a later patch will. So go ahead and add them now to reduce
future churn in this code.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Access to this list is currently serialized by the client_mutex. Add
finer grained locking around this list in preparation for its removal.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
* pm-cpufreq:
cpufreq: Makefile: fix compilation for davinci platform
intel_pstate: Set CPU number before accessing MSRs
intel_pstate: Update documentation of {max,min}_perf_pct sysfs files
intel_pstate: don't touch turbo bit if turbo disabled or unavailable.
intel_pstate: Fix setting VID
* acpi-resources:
ACPI / resources: only reject zero length resources based at address zero
* acpi-ac:
Revert "ACPI / AC: Remove AC's proc directory."
* acpi-scan:
ACPI / PNP: add soc_button_array device ID to PNP IDs list
* acpi-battery:
ACPI / battery: fix wrong value of capacity_now reported when fully charged
ACPI / battery: Retry to get battery information if failed during probing
Pull libata fixes from Tejun Heo:
"Nothing too interesting. All fixes are ahci_platform related"
* 'for-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
ahci_xgene: fix the dma state machine lockup for the IDENTIFY DEVICE PIO mode command.
libahci: export ahci_qc_issue() and ahci_start_fix_rx()
ata: ahci_imx: warn when disabling ahci link
ahci: disable ncq feature for hisilicon sata
ahci: imx: manage only sata_ref_clk in imx_sata_enable[disable]
libahci_platform: Fail when PHY required but PHY support disabled
Pull cgroup fixes from Tejun Heo:
"Mostly fixes for the fallouts from the recent cgroup core changes.
The decoupled nature of cgroup dynamic hierarchy management
(hierarchies are created dynamically on mount but may or may not be
reused once unmounted depending on remaining usages) led to more
ugliness being added to kernfs.
Hopefully, this is the last of it"
* 'for-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cpuset: break kernfs active protection in cpuset_write_resmask()
cgroup: fix a race between cgroup_mount() and cgroup_kill_sb()
kernfs: introduce kernfs_pin_sb()
cgroup: fix mount failure in a corner case
cpuset,mempolicy: fix sleeping function called from invalid context
cgroup: fix broken css_has_online_children()
Pull workqueue fixes from Tejun Heo:
"Two workqueue fixes. Both are one liners. One fixes missing uevent
for workqueue files on sysfs. The other one fixes missing zeroing of
NUMA cpu masks which can lead to oopses among other things"
* 'for-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
workqueue: zero cpumask of wq_numa_possible_cpumask on init
workqueue: fix dev_set_uevent_suppress() imbalance
Pull percpu fix from Tejun Heo:
"One patch to fix a typo in percpu section name. Given how long the
bug has been there and that there hasn't been any report of brekage,
it's unlikely to cause actual issues"
* 'for-3.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
core: fix typo in percpu read_mostly section
Pull i2c build fix and cleanup from Wolfram Sang:
"One buildfix for the i2c subsystem. While here, I decided to add the
header cleanup as well"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: sun6i-p2wi: Remove duplicate inclusion of module.h
i2c: mux: pca954x: fix dependencies
Pull crypto fixes from Herbert Xu:
"This push fixes an error in sha512_ssse3 that leads to incorrect
output as well as a memory leak in caam_jr when the module is
unloaded"
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: caam - fix memleak in caam_jr module
crypto: sha512_ssse3 - fix byte count to bit count conversion
No need to take the lock unless the count goes to 0.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Bruce says:
There's also a preexisting expire_client/laundromat vs break race:
- expire_client/laundromat adds a delegation to its local
reaplist using the same dl_recall_lru field that a delegation
uses to track its position on the recall lru and drops the
state lock.
- a concurrent break_lease adds the delegation to the lru.
- expire/client/laundromat then walks it reaplist and sees the
lru head as just another delegation on the list....
Fix this race by checking the dl_time under the state_lock. If we find
that it's not 0, then we know that it has already been queued to the LRU
list and that we shouldn't queue it again.
In the case of destroy_client, we must also ensure that we don't hit
similar races by ensuring that we don't move any delegations to the
reaplist with a dl_time of 0. Just bump the dl_time by one before we
drop the state_lock. We're destroying the delegations anyway, so a 1s
difference there won't matter.
The fault injection code also requires a bit of surgery here:
First, in the case of nfsd_forget_client_delegations, we must prevent
the same sort of race vs. the delegation break callback. For that, we
just increment the dl_time to ensure that a delegation callback can't
race in while we're working on it.
We can't do that for nfsd_recall_client_delegations, as we need to have
it actually queue the delegation, and that won't happen if we increment
the dl_time. The state lock is held over that function, so we don't need
to worry about these sorts of races there.
There is one other potential bug nfsd_recall_client_delegations though.
Entries on the victims list are not dequeued before calling
nfsd_break_one_deleg. That's a potential list corruptor, so ensure that
we do that there.
Reported-by: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Turns out that DMI_SYSTEM_VENDOR is actually the native vendor of each
Chromebook/box. I tested the original patch on a Pixel that -- surprise,
has Google as vendor. *facepalm*.
The only other data I can think of to probe on is Google_* in the version
string. Checking with our firmware team, all systems should have this
and nothing else than Chrome hardware should have the coreboot + Google_*
combination to date.
So, we'll switch to this. For future platforms we are going to move to
using an ACPI device to configure this instead of a DMI table (yay!),
so longer-term that will sort itself out.
Signed-off-by: Olof Johansson <olof@lixom.net>
Reviewed-by: Benson Leung <bleung@chromium.org>
added blank lines after declarations in some places
Signed-off-by: Robin Schroer <sulamiification@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
My static checker warns that "data_size" could be negative and underflow
the limit check. The code looks suspicious but I don't know if it is a
real bug.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
Don't error out with misleading "out of memory"
if the cpu-mask has more bits set than there are CPUs.
Just truncate to nr_cpu_ids implicitly.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
size is always 4096,
page is always device->md_io.page.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
During resync, if we need to block some specific incoming write because
of active resync requests to that same range, we potentially caused
*all* new application writes (to "cold" activity log extents) to block
until this one request has been processed.
Improve the do_submit() logic to
* grab all incoming requests to some "incoming" list
* process this list
- move aside requests that are blocked by resync
- prepare activity log transactions,
- commit transactions and submit corresponding requests
- if there are remaining requests that only wait for
activity log extents to become free, stop the fast path
(mark activity log as "starving")
- iterate until no more requests are waiting for the activity log,
but all potentially remaining requests are only blocked by resync
* only then grab new incoming requests
That way, very busy IO on currently "hot" activity log extents cannot
starve scattered IO to "cold" extents. And blocked-by-resync requests
are processed once resync traffic on the affected region has ceased,
without blocking anything else.
The only blocking mode left is when we cannot start requests to "cold"
extents because all currently "hot" extents are actually used.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
The data generation identifiers used to be exposed via sysfs
at /sys/block/drbdX/drbd/meta_data/data_gen_id (out-of-tree),
for advanced policy scripting.
Bring that information over to debugfs.
Signed-off-by: Philipp Reisner <philipp.reisner@linbit.com>
Signed-off-by: Lars Ellenberg <lars.ellenberg@linbit.com>
