Switch the two remaining places across the driver that use dev_alloc_skb
to netdev_alloc_skb. Another place has already been converted to use
__netdev_alloc_skb, no idea why these two have been left behind.
Reported-by: Robert Coerver <Robert.Coerver@ll.mit.edu>
Tested-by: Robert Coerver <Robert.Coerver@ll.mit.edu>
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Prearranged receive DMA bounce buffer mappings are not released in the
card reboot/shutdown path. That does not affect frame reception, but
probably explains the random segmentation fault I observed the other day
on interface shutdown. Card is rebooted as required by the spec in the
process of ring fault recovery when a PC Trace signal has been received.
This change fixes the problem in an obvious manner.
Reported-by: Robert Coerver <Robert.Coerver@ll.mit.edu>
Tested-by: Robert Coerver <Robert.Coerver@ll.mit.edu>
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Receive DMA maps are oversized, they include EISA legacy 128-byte
alignment padding in size calculation whereas this padding is never used
for data. Worse yet, if the skb's data area has been realigned indeed,
then data beyond the end of the buffer will be synchronised from the
receive DMA bounce buffer, possibly corrupting data structures residing
in memory beyond the actual end of this data buffer.
Therefore switch to using PI_RCV_DATA_K_SIZE_MAX rather than NEW_SKB_SIZE
in DMA mapping, the value the former macro expands to is written to the
receive ring DMA descriptor of the PDQ DMA chip and determines the
maximum amount of data PDQ will ever transfer to the corresponding data
buffer, including all headers and padding.
Reported-by: Robert Coerver <Robert.Coerver@ll.mit.edu>
Tested-by: Robert Coerver <Robert.Coerver@ll.mit.edu>
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Print messages about failures in pci_assign_resource(). We can drop the
"by-hand" message from _pci_assign_resource() because %pR now prints the
size rather than the address if the resource hasn't been assigned.
No functional change.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Previously we returned zero for success or 1 for failure. This changes
that so we return zero for success or a negative errno for failure.
No functional change.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Return errors immediately so the straightline path is the normal,
no-error path. No functional change.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Now that the udev firmware loader is optional request_firmware()
will not provide any information on the kernel ring buffer if
direct firmware loading failed and udev firmware loading is disabled.
If no information is needed request_firmware_direct() should be used
for optional firmware, at which point drivers can take on the onus
over informing of any failures, if udev firmware loading is disabled
though we should at the very least provide some sort of information
as when the udev loader was enabled by default back in the days.
With this change with a simple firmware load test module [0]:
Example output without FW_LOADER_USER_HELPER_FALLBACK
platform fake-dev.0: Direct firmware load for fake.bin failed
with error -2
Example with FW_LOADER_USER_HELPER_FALLBACK
platform fake-dev.0: Direct firmware load for fake.bin failed with error -2
platform fake-dev.0: Falling back to user helper
Without this change without FW_LOADER_USER_HELPER_FALLBACK we
get no output logged upon failure.
Cc: Tom Gundersen <teg@jklm.no>
Cc: Ming Lei <ming.lei@canonical.com>
Cc: Abhay Salunke <Abhay_Salunke@dell.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
use mm.h definition
Cc: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is no need to read attr because inode structure contains size
of the file. Use i_size_read() instead.
Signed-off-by: Dmitry Kasatkin <d.kasatkin@samsung.com>
Acked-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[The patch was originally proposed by Tom Gundersen, and rewritten
afterwards by me; most of changelogs below borrowed from Tom's
original patch -- tiwai]
Currently (at least) the dell-rbu driver selects FW_LOADER_USER_HELPER,
which means that distros can't really stop loading firmware through
udev without breaking other users (though some have).
Ideally we would remove/disable the udev firmware helper in both the
kernel and in udev, but if we were to disable it in udev and not the
kernel, the result would be (seemingly) hung kernels as no one would
be around to cancel firmware requests.
This patch allows udev firmware loading to be disabled while still
allowing non-udev firmware loading, as done by the dell-rbu driver, to
continue working. This is achieved by only using the fallback
mechanism when the uevent is suppressed.
The patch renames the user-selectable Kconfig from FW_LOADER_USER_HELPER
to FW_LOADER_USER_HELPER_FALLBACK, and the former is reverse-selected
by the latter or the drivers that need userhelper like dell-rbu.
Also, the "default y" is removed together with this change, since it's
been deprecated in udev upstream, thus rather better to disable it
nowadays.
Tested with
FW_LOADER_USER_HELPER=n
LATTICE_ECP3_CONFIG=y
DELL_RBU=y
and udev without the firmware loading support, but I don't have the
hardware to test the lattice/dell drivers, so additional testing would
be appreciated.
Reviewed-by: Tom Gundersen <teg@jklm.no>
Cc: Ming Lei <ming.lei@canonical.com>
Cc: Abhay Salunke <Abhay_Salunke@dell.com>
Cc: Stefan Roese <sr@denx.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Kay Sievers <kay@vrfy.org>
Tested-by: Balaji Singh <B_B_Singh@DELL.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Increase the maximum BAR size from 8GB to 128GB.
[bhelgaas: changelog]
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The Generic Interrupt Controller (version 3) offers services that are
similar to GICv2, with a number of additional features:
- Affinity routing based on the CPU MPIDR (ARE)
- System register for the CPU interfaces (SRE)
- Support for more that 8 CPUs
- Locality-specific Peripheral Interrupts (LPIs)
- Interrupt Translation Services (ITS)
This patch adds preliminary support for GICv3 with ARE and SRE,
non-secure mode only. It relies on higher exception levels to grant ARE
and SRE access.
Support for LPI and ITS will be added at a later time.
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Reviewed-by: Zi Shen Lim <zlim@broadcom.com>
Reviewed-by: Christoffer Dall <christoffer.dall@linaro.org>
Reviewed-by: Tirumalesh Chalamarla <tchalamarla@cavium.com>
Reviewed-by: Yun Wu <wuyun.wu@huawei.com>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Tested-by: Tirumalesh Chalamarla<tchalamarla@cavium.com>
Tested-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
Acked-by: Radha Mohan Chintakuntla <rchintakuntla@cavium.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Link: https://lkml.kernel.org/r/1404140510-5382-3-git-send-email-marc.zyngier@arm.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Currently, the blkio subsystem attributes all of writeback IOs to the
root. One of the issues is that there's no way to tell who originated
a writeback IO from block layer. Those IOs are usually issued
asynchronously from a task which didn't have anything to do with
actually generating the dirty pages. The memory subsystem, when
enabled, already keeps track of the ownership of each dirty page and
it's desirable for blkio to piggyback instead of adding its own
per-page tag.
cgroup now has a mechanism to express such dependency -
cgroup_subsys->depends_on. This patch declares that blkcg depends on
memcg so that memcg is enabled automatically on the default hierarchy
when available. Future changes will make blkcg map the memcg tag to
find out the cgroup to blame for writeback IOs.
As this means that a memcg may be made invisible, this patch also
implements css_reset() for memcg which resets its basic
configurations. This implementation will probably need to be expanded
to cover other states which are used in the default hierarchy.
v2: blkcg's dependency on memcg is wrapped with CONFIG_MEMCG to avoid
build failure. Reported by kbuild test robot.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Jens Axboe <axboe@kernel.dk>
Currently, the blkio subsystem attributes all of writeback IOs to the
root. One of the issues is that there's no way to tell who originated
a writeback IO from block layer. Those IOs are usually issued
asynchronously from a task which didn't have anything to do with
actually generating the dirty pages. The memory subsystem, when
enabled, already keeps track of the ownership of each dirty page and
it's desirable for blkio to piggyback instead of adding its own
per-page tag.
blkio piggybacking on memory is an implementation detail which
preferably should be handled automatically without requiring explicit
userland action. To achieve that, this patch implements
cgroup_subsys->depends_on which contains the mask of subsystems which
should be enabled together when the subsystem is enabled.
The previous patches already implemented the support for enabled but
invisible subsystems and cgroup_subsys->depends_on can be easily
implemented by updating cgroup_refresh_child_subsys_mask() so that it
calculates cgroup->child_subsys_mask considering
cgroup_subsys->depends_on of the explicitly enabled subsystems.
Documentation/cgroups/unified-hierarchy.txt is updated to explain that
subsystems may not become immediately available after being unused
from userland and that dependency could be a factor in it. As
subsystems may already keep residual references, this doesn't
significantly change how subsystem rebinding can be used.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
cgroup is implementing support for subsystem dependency which would
require a way to enable a subsystem even when it's not directly
configured through "cgroup.subtree_control".
The previous patches added support for explicitly and implicitly
enabled subsystems and showing/hiding their interface files. An
explicitly enabled subsystem may become implicitly enabled if it's
turned off through "cgroup.subtree_control" but there are subsystems
depending on it. In such cases, the subsystem, as it's turned off
when seen from userland, shouldn't enforce any resource control.
Also, the subsystem may be explicitly turned on later again and its
interface files should be as close to the intial state as possible.
This patch adds cgroup_subsys->css_reset() which is invoked when a css
is hidden. The callback should disable resource control and reset the
state to the vanilla state.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
cgroup is implementing support for subsystem dependency which would
require a way to enable a subsystem even when it's not directly
configured through "cgroup.subtree_control".
The preceding patch distinguished cgroup->subtree_control and
->child_subsys_mask where the former is the subsystems explicitly
configured by the userland and the latter is all enabled subsystems
currently is equal to the former but will include subsystems
implicitly enabled through dependency.
Subsystems which are enabled due to dependency shouldn't be visible to
userland. This patch updates cgroup_subtree_control_write() and
create_css() such that interface files are not created for implicitly
enabled subsytems.
* @visible paramter is added to create_css(). Interface files are
created only when true.
* If an already implicitly enabled subsystem is turned on through
"cgroup.subtree_control", the existing css should be used. css
draining is skipped.
* cgroup_subtree_control_write() computes the new target
cgroup->child_subsys_mask and create/kill or show/hide csses
accordingly.
As the two subsystem masks are still kept identical, this patch
doesn't introduce any behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
cgroup is implementing support for subsystem dependency which would
require a way to enable a subsystem even when it's not directly
configured through "cgroup.subtree_control".
Previously, cgroup->child_subsys_mask directly reflected
"cgroup.subtree_control" and the enabled subsystems in the child
cgroups. This patch adds cgroup->subtree_control which
"cgroup.subtree_control" operates on. cgroup->child_subsys_mask is
now calculated from cgroup->subtree_control by
cgroup_refresh_child_subsys_mask(), which sets it identical to
cgroup->subtree_control for now.
This will allow using cgroup->child_subsys_mask for all the enabled
subsystems including the implicit ones and ->subtree_control for
tracking the explicitly requested ones. This patch keeps the two
masks identical and doesn't introduce any behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Make the following two reorganizations to
cgroup_subtree_control_write(). These are to prepare for future
changes and shouldn't cause any functional difference.
* Move availability above css offlining wait.
* Move cgrp->child_subsys_mask update above new css creation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Li Zefan <lizefan@huawei.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
A few GICv2 low-level function are actually very useful to GICv3,
and it makes some sense to share them across the two drivers.
They end-up in their own file, with an additional parameter used
to ensure an optional synchronization (unused on GICv2).
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Acked-by: Christoffer Dall <christoffer.dall@linaro.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Link: https://lkml.kernel.org/r/1404140510-5382-2-git-send-email-marc.zyngier@arm.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
We can now designate reviewers in the MAINTAINERS file with the new
"R:" tag, so this commit teaches get_maintainers.pl to add their
email addresses.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
David Laight says:
====================
net: sctp: Optimisations to sctp command queue code
These 3 patches optimise the code that processes sctp's command queue.
(A list of 'tasks' to be performed after the rest of the chunk processing.)
1) Inline all the functions from command.c
2) Remove the memset() calls used to zero a word-sized union.
3) Use pointers instead of array indexes.
The combined changes reduce the code size (amd64) by a few kb.
I'm not 100% convinced that the zeroing done in patch 2 is needed at all.
On BE systems it is likely to generate more code than on LE ones.
In fact it might be best to change the union to only contain 'long' sized
items.
Changes for v2:
- Add some missing initialisers in patch 2/3 and delete them in 3/3.
- Modify the commit message for 2/3 to point out that the union
shouldn't need to be zeroed, but the patches aren't intended to
change the behaviour even if the code is buggy.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Using pointers into sctp_cmd_seq_t.cmds[] lets the compiler generate much
better code.
Use the last entry first to optimise the overflow check.
Signed-off-by: David Laight <david.laight@aculab.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Even if memset() is inlined (as on x86) using it to zero the union
generates a memory word write of zero, followed by a write of the
smaller field, and then a read of the word.
As well as being a lot of instructions the sequence is unlikely to
be optimised by the store-load forward hardware so will be slow.
Instead allocate a field of the union that is the same size as the
entire union and write a zero value to it. The compiler will then
generate the required value in a register.
Zeroing the union shouldn't be necessary, but this patch series isn't
intended to have a behavioural change.
Signed-off-by: David Laight <david.laight@aculab.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
sctp_init_cmd_seq() and sctp_next_cmd() are only called from one place.
The call sequence for sctp_add_cmd_sf() is likely to be longer than
the inlined code.
With sctp_add_cmd_sf() inlined the compiler can optimise repeated calls.
Signed-off-by: David Laight <david.laight@aculab.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This warning is introduced by commit 7b30600cc6 ("appletalk:
fix checkpatch error with indent"), So fix it.
Signed-off-by: Wang Weidong <wangweidong1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch changes the IEEE 802.15.4 subsystem maintainer to Alexander Aring.
We discussed this change before via e-mail and I collected the acks from the
current maintainers.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Acked-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Acked-by: Alexander Smirnov <alex.bluesman.sminov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
John W. Linville says:
====================
pull request: wireless-next 2014-07-03
Please pull this first batch of wireless updates intended for the
3.17 stream...
For the mac80211 bits, Johannes says:
"The biggest thing here is probably Arik's TDLS rework, beyond that we
have smaller improvements and features like David's scanning IE thing,
Luca's queue work, some CSA work, etc. Also your PID rate control
removal, of course."
For the iwlwifi bits, Emmanuel says:
"I have here a whole bunch of various things. Andy contributes
better debug prints for dvm specific flows and a module parameter to
completely disable power save for dvm. Andrei is sharing the premises
of his work on CSA - more to come. Eran and Liad keep on working
on the new devices. I have the regular amount of BT Coex stuff and
I continue to work on the firmware error report system adding more
debug capabilities. More to come on that subject too."
On top of that, there are some cleanups to the new rsi driver, some
continuing improvements to the rtl818x drivers, and the usual bundles
of updates to ath9k, b43, mwifiex, wil6210, and a few other bits here
and there.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
load_pointer() is already a static inline function.
Let's move it into filter.h so BPF JIT implementations can reuse this
function.
Since we're exporting this function, let's also rename it to
bpf_load_pointer() for clarity.
Signed-off-by: Zi Shen Lim <zlim.lnx@gmail.com>
Reviewed-by: Daniel Borkmann <dborkman@redhat.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the NFSv4 spec, lock stateids are per-file objects. Lockowners are not.
This patch replaces the current list of lock owners in the open stateids
with a list of lock stateids.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Minor cleanup that should introduce no behavioral changes.
Currently this function just unhashes the stateid and leaves the caller
to do the work of the CLOSE processing.
Change nfsd4_close_open_stateid so that it handles doing all of the work
of closing a stateid. Move the handling of the unhashed stateid into it
instead of doing that work in nfsd4_close. This will help isolate some
coming changes to stateid handling from nfsd4_close.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
There's no need to confirm an openowner in v4.1 and above, so we can
go ahead and set NFS4_OO_CONFIRMED when we create openowners in
those versions. This will also be necessary when we remove the
client_mutex, as it'll be possible for two concurrent opens to race
in versions >4.0.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Move the slot return, put session etc into a helper in fs/nfsd/nfs4state.c
instead of open coding in nfs4svc_encode_compoundres.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Not technically a bugfix, since nothing tries to use the return pointer
if this function doesn't return success, but it could be a problem
with some coming changes.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently, the maximum number of connections that nfsd will allow
is based on the number of threads spawned. While this is fine for a
default, there really isn't a clear relationship between the two.
The number of threads corresponds to the number of concurrent requests
that we want to allow the server to process at any given time. The
connection limit corresponds to the maximum number of clients that we
want to allow the server to handle. These are two entirely different
quantities.
Break the dependency on increasing threads in order to allow for more
connections, by adding a new per-net parameter that can be set to a
non-zero value. The default is still to base it on the number of threads,
so there should be no behavior change for anyone who doesn't use it.
Cc: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Since nfsd_create_setattr strips the mode from the struct iattr, it
is quite possible that it will optimise away the call to nfsd_setattr
altogether.
If this is the case, then we never call commit_metadata() on the
newly created file.
Also ensure that both nfsd_setattr() and nfsd_create_setattr() fail
when the call to commit_metadata fails.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Commit db2e747b14 (vfs: remove mode parameter from vfs_symlink())
have remove mode parameter from vfs_symlink.
So that, iattr isn't needed by nfsd_symlink now, just remove it.
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Current code depends on the client_mutex to guarantee a single struct
nfs4_file per inode in the file_hashtbl and make addition atomic with
respect to lookup. Rely instead on the state_Lock, to make it easier to
stop taking the client_mutex here later.
To prevent an i_lock/state_lock inversion, change nfsd4_init_file to
use ihold instead if igrab. That's also more efficient anyway as we
definitely hold a reference to the inode at that point.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
nfsd4_process_open2 will currently will get access to the file, and then
call nfsd4_truncate to (possibly) truncate it. If that operation fails
though, then the access references will never be released as the
nfs4_ol_stateid is never initialized.
Fix by moving the nfsd4_truncate call into nfs4_get_vfs_file, ensuring
that the refcounts are properly put if the truncate fails.
Signed-off-by: Jeff Layton <jlayton@primarydata.com>
Signed-off-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
fs/nfsd/nfs4xdr.c: In function 'nfsd4_encode_readv':
>> fs/nfsd/nfs4xdr.c:3137:148: warning: comparison of distinct pointer types lacks a cast [enabled by default]
thislen = min(len, ((void *)xdr->end - (void *)xdr->p));
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Avoid an extra allocation for the tmpbuf struct itself, and stop
ignoring some allocation failures.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This is a not-that-useful kmalloc wrapper. And I'd like one of the
callers to actually use something other than kmalloc.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
28e05dd845 "knfsd: nfsd4: represent nfsv4 acl with array instead of
linked list" removed the last user that wanted a custom free function.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The name of a link is currently stored in cr_name and cr_namelen, and
the content in cr_linkname and cr_linklen. That's confusing.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently nfsd_symlink has a weird hack to serve callers who don't
null-terminate symlink data: it looks ahead at the next byte to see if
it's zero, and copies it to a new buffer to null-terminate if not.
That means callers don't have to null-terminate, but they *do* have to
ensure that the byte following the end of the data is theirs to read.
That's a bit subtle, and the NFSv4 code actually got this wrong.
So let's just throw out that code and let callers pass null-terminated
strings; we've already fixed them to do that.
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
It's simple enough for NFSv2 to null-terminate the symlink data.
A bit weird (it depends on knowing that we've already read the following
byte, which is either padding or part of the mode), but no worse than
the conditional kstrdup it otherwise relies on in nfsd_symlink().
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
An NFS operation that creates a new symlink includes the symlink data,
which is xdr-encoded as a length followed by the data plus 0 to 3 bytes
of zero-padding as required to reach a 4-byte boundary.
The vfs, on the other hand, wants null-terminated data.
The simple way to handle this would be by copying the data into a newly
allocated buffer with space for the final null.
The current nfsd_symlink code tries to be more clever by skipping that
step in the (likely) case where the byte following the string is already
0.
But that assumes that the byte following the string is ours to look at.
In fact, it might be the first byte of a page that we can't read, or of
some object that another task might modify.
Worse, the NFSv4 code tries to fix the problem by actually writing to
that byte.
In the NFSv2/v3 cases this actually appears to be safe:
- nfs3svc_decode_symlinkargs explicitly null-terminates the data
(after first checking its length and copying it to a new
page).
- NFSv2 limits symlinks to 1k. The buffer holding the rpc
request is always at least a page, and the link data (and
previous fields) have maximum lengths that prevent the request
from reaching the end of a page.
In the NFSv4 case the CREATE op is potentially just one part of a long
compound so can end up on the end of a page if you're unlucky.
The minimal fix here is to copy and null-terminate in the NFSv4 case.
The nfsd_symlink() interface here seems too fragile, though. It should
really either do the copy itself every time or just require a
null-terminated string.
Reported-by: Jeff Layton <jlayton@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This fixes compiler warnings:
drivers/net/ethernet/amd/declance.c: In function 'lance_init_ring':
drivers/net/ethernet/amd/declance.c:478: warning: format '%8.8x' expects type 'unsigned int', but argument 3 has type 'long unsigned int'
drivers/net/ethernet/amd/declance.c:487: warning: format '%8.8x' expects type 'unsigned int', but argument 3 has type 'long unsigned int'
drivers/net/ethernet/amd/declance.c:503: warning: cast from pointer to integer of different size
drivers/net/ethernet/amd/declance.c:520: warning: cast from pointer to integer of different size
in 64-bit compilation. Where the value printed is an offset (whose range
will always fit) the cast uses a 32-bit type, otherwise, where it is a
host memory address, the pointer is output directly with %p. Also the
remaining `0x' prefix is dropped for consistency across these messages.
Tested with both 32-bit and 64-bit compilation, as well as at the run time
(with the debug messages affected enabled).
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 51b1130eb5 ("rcutorture: Abstract rcu_torture_random()")
moved the file, so this commit updates the patterns.
Signed-off-by: Joe Perches <joe@perches.com>
cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
