Versatile platforms share the same OSC programming model as Integrator
platforms. Add the necessary parameters and init functions for Versatile.
Renaming the file to clk-versatile.c as versatile is used as the family
name for ARM, Ltd. boards.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Mike Turquette <mturquette@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
The versatile dts is missing any clock data. Add the clocks.
It is not clear from the documentation where pclk comes from, so for
now it is a dummy clock which is sufficient for things to work.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
The sp804 clocks may be specified in DT, but the kernel may still be using
legacy clocks. This is handled if a single clock for sp804 is present,
but not when 3 clocks are present.
This prevents Versatile platforms from breaking when the DT has clocks
added.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Add binding for the core module found on ARM versatile AB and PB boards.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
While not needed for probing, add the "arm,pl180" compatible string for
completeness.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Now that versatile's irqchips are initialized from DT, the init_irq hook
can be removed.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Now that versatile-fpga irqchip has IRQCHIP_DECLARE support, the interrupt
related initialization can be removed.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
The secondary controller on ARM Versatile AB and PB is similar to
other ARM platforms, but has a pass-thru register to connect some
interrupts directly to interrupt inputs on the primary interrupt
controller. The PIC_ENABLES register needs to be configured for
proper operation when the matching node is arm,versatile-sic. Add the
the necessary IRQCHIP_DECLARE as well.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Arnd Bergmann <arnd@arndb.de>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Add support for initialization using IRQCHIP_DECLARE. This also requires
that the controller initialization set the handle_irq function pointer
itself when it is a primary controller.
Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Add valid-mask and clear-mask properties to the versatile dts so the
platform code doing the same thing can be removed.
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
If the device fails during a restart, mac80211 now handles the
situation better but we still have a little bit of cleanup to
do in the driver - add the required code.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: ArikX Nemtsov <arik@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Since the new API allows multiple priorities, we need to
properly set the beacon's prorities in the TX cmd associated
to it.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Use extended beacon notification when supported by FW.
Set last beacon system time to AP or GO interface.
System time of last beacon can be used to avoid TBTT overlapping
between two interfaces, CSA and other uses.
Signed-off-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Introduce new station flag STA_FLG_DISABLE_TX, which is modified with ADD_STA
command. This flag, when set, disables tx to the STA.
Provide an API (iwl_mvm_sta_modify_disable_tx) to modify this flag, which
should be used in channel switch and immediate quiet flows.
Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
The beacon filtering configuration in d0i3 currently uses
the max value defined as 1024. However, with beacon interval
of 100ms we end up with too-frequent wakeups.
Instead, configure the escape timer to 0, asking the fw
to disable it altogether.
Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
If BT is active, we need to refrain from using the shared
antenna. This logic is done in the firmware when we use the
link quality tables. But for management frames, the rate is
written in the Tx command by the driver.
Hence the driver needs to make sure not use the shared
antenna when BT is active for any frames that don't use
the rate scale table such as management frames or multicast.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
This really belongs to the constants file.
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
When the firmware enables TxTxCorunning, we can lift the
constaints on the rate control.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
We can Tx in MIMO rates when we are in TxTx Disallow mode
just like we can when we are in Tight mode.
Same if we are in 5Ghz regardless of the mode we are.
Change the code to allow MIMO in these cases.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Just in case sizes change in the OTP without proper SW
updating, an additional check is inserted when reading OTP
sections to assure no overflows occur.
Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Some of the maximum values of the parsed external NVM file
in the B-step of the 8000 HW family were updated, so this
updates these values.
Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
The format of the CSR_HW_REV register has changed in 8000
HW family. To keep backwards compatibility, we store the
value of this register as usual in trans->hw_rev, only we
store it in the old format in this variable.
Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Don't use nvm_hw pointer if it is NULL. Print an error
message if the MAC address isn't valid.
Signed-off-by: Eran Harary <eran.harary@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
iwldvm stalls are often blamed on power management. Add an option
to force it all the way off.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
I've never seen this happen, but it's useful to rule it out.
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Fix NVM channel attributes. Add indoor-only and GO Concurrent
bits. Remove DFS channel bit which is overlapped with radar.
Signed-off-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
The nvm_file should be loaded by default for SDIO
procucts only. Change the configuration accordingly.
While at it, fix a typo in the device name.
Signed-off-by: Eran Harary <eran.harary@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
This allows to use the firmware monitor. This capability
uses a lot of contiguous memory (up to 64MB), so make its
usage module parameter dependent.
The driver will try to allocate as much contiguous memory
as possible downgrading its requirements until the
allocation succeeds.
Dump this data into the fw-error dump file when an error
happens.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
This can be useful later for parsing since the parsing may
differ based on the device's family / bus.
Also add the human readable version of the firmware.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
MCS32 is currently not supported, so don't
declare support for it.
Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Use num of scan channels as advertised by fw TLV.
Signed-off-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
This patch fixes the following sparse warnings:
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:46:20: warning: symbol 'the_ksocklnd' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:49:19: warning: symbol 'ksocknal_ip2iface' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:67:15: warning: symbol 'ksocknal_create_route' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:103:1: warning: symbol 'ksocknal_create_peer' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:218:1: warning: symbol 'ksocknal_unlink_peer_locked' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:248:1: warning: symbol 'ksocknal_get_peer_info' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:323:1: warning: symbol 'ksocknal_associate_route_conn_locked' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:368:1: warning: symbol 'ksocknal_add_route_locked' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:409:1: warning: symbol 'ksocknal_del_route_locked' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:511:1: warning: symbol 'ksocknal_del_peer_locked' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:566:1: warning: symbol 'ksocknal_del_peer' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:624:14: warning: symbol 'ksocknal_get_conn_by_idx' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:661:15: warning: symbol 'ksocknal_choose_scheduler_locked' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:685:1: warning: symbol 'ksocknal_local_ipvec' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:713:1: warning: symbol 'ksocknal_match_peerip' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:745:1: warning: symbol 'ksocknal_select_ips' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:847:1: warning: symbol 'ksocknal_create_routes' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:997:1: warning: symbol 'ksocknal_connecting' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:1853:1: warning: symbol 'ksocknal_push_peer' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:1886:1: warning: symbol 'ksocknal_push' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:1935:1: warning: symbol 'ksocknal_add_interface' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:1997:1: warning: symbol 'ksocknal_peer_del_interface_locked' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:2038:1: warning: symbol 'ksocknal_del_interface' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:2213:1: warning: symbol 'ksocknal_free_buffers' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:2256:1: warning: symbol 'ksocknal_base_shutdown' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:2349:1: warning: symbol 'ksocknal_new_incarnation' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:2364:1: warning: symbol 'ksocknal_base_startup' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:2496:1: warning: symbol 'ksocknal_debug_peerhash' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:2603:1: warning: symbol 'ksocknal_enumerate_interfaces' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:2660:1: warning: symbol 'ksocknal_search_new_ipif' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:2702:1: warning: symbol 'ksocknal_start_schedulers' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:2748:1: warning: symbol 'ksocknal_net_start_threads' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:2860:1: warning: symbol 'ksocknal_module_fini' was not declared. Should it be static?
drivers/staging/lustre/lnet/klnds/socklnd/socklnd.c:2866:1: warning: symbol 'ksocknal_module_init' was not declared. Should it be static?
Signed-off-by: James A Shackleford <shack@linux.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add one more 7265 series HW ID.
Edit one existing 7265 series HW ID.
CC: <stable@vger.kernel.org> [3.13+]
Signed-off-by: Oren Givon <oren.givon@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Don't run rtw_validate_vendor_specific_ies() on anything but
WLAN_EID_VENDOR_SPECIFIC. In addition use the proper
WLAN_OUI_TYPE_MICROSOFT_* definitions.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Another case using hard coded offsets counting on the presence of
fixed beacon elements in the IEs array.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This also eliminates another round of determine algorithm based on key
length, followed by determine key length based on algorithm.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We validate the parameters in cfg80211_rtw_add_key() so no need to do
it all again in rtw_cfg80211_{ap_}set_encryption()
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
struct ieee_parms is obsolete, so stop passing it on.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
