The dw_i3c_master_i3c_xfers() function allocates memory for the xfer
structure using dw_i3c_master_alloc_xfer(). If pm_runtime_resume_and_get()
fails, the function returns without freeing the allocated xfer, resulting
in a memory leak.
Since dw_i3c_master_free_xfer() is a thin wrapper around kfree(), use
the __free(kfree) cleanup attribute to handle the free automatically on
all exit paths.
Fixes: 62fe9d06f5 ("i3c: dw: Add power management support")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260404-dw-i3c-2-v3-1-8f7d146549c1@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Use __free(kfree) for automatic cleanup, matching the pattern already
used in other functions in this driver.
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260406-renesas-v3-2-4b724d7708f4@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The xfer structure allocated by renesas_i3c_alloc_xfer() was never freed
in the renesas_i3c_i3c_xfers() function. Use the __free(kfree) cleanup
attribute to automatically free the memory when the variable goes out of
scope.
Fixes: d028219a9f ("i3c: master: Add basic driver for the Renesas I3C controller")
Tested-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Tommaso Merciai <tommaso.merciai.xr@bp.renesas.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Link: https://patch.msgid.link/20260406-renesas-v3-1-4b724d7708f4@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
When DW_I3C_DISABLE_RUNTIME_PM_QUIRK is set, the probe function calls
pm_runtime_get_noresume() to prevent runtime suspend. However, if
i3c_master_register() fails, the error path does not balance this
call, leaving the usage count incremented.
Add pm_runtime_put_noidle() in the error cleanup path to properly
balance the usage count.
Fixes: fba0e56ee7 ("i3c: dw: Disable runtime PM on Agilex5 to avoid bus hang on IBI")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260321-dw-i3c-1-v1-1-821623aac7bb@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
The reset line acquired during probe is currently left deasserted when
the driver is unbound.
Switch to devm_reset_control_get_optional_exclusive_deasserted() to
ensure the reset is automatically re-asserted by the devres core when
the driver is removed.
Fixes: 62fe9d06f5 ("i3c: dw: Add power management support")
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260320-dw-i3c-v3-1-477040c2e3f5@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Intel LPSS I3C controllers can wake from runtime suspend to receive
in-band interrupts (IBIs), and they also implement the MIPI I3C HCI
Multi-Bus Instance capability. When multiple I3C bus instances share the
same PCI wakeup, the PCI parent must coordinate runtime PM so that all
instances suspend together and their mipi-i3c-hci runtime suspend
callbacks are invoked in a consistent manner.
Enable IBI-based wakeup by setting HCI_QUIRK_RPM_IBI_ALLOWED for the
intel-lpss-i3c platform device. Also set HCI_QUIRK_RPM_PARENT_MANAGED so
that the mipi-i3c-hci core driver expects runtime PM to be controlled by
the PCI parent rather than by individual instances. For all Intel HCI PCI
configurations, enable the corresponding control_instance_pm flag in the
PCI driver.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306085338.62955-6-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Some platforms implement the MIPI I3C HCI Multi-Bus Instance capability,
where a single parent device hosts multiple I3C controller instances. In
such designs, the parent - not the individual child instances - may need to
coordinate runtime PM so that all controllers runtime PM callbacks are
invoked in a controlled and synchronized manner.
For example, if the parent enables IBI-wakeup when transitioning into a
low-power state, every bus instance must remain able to receive IBIs up
until that point. This requires deferring the individual controllers'
runtime suspend callbacks (which disable bus activity) until the parent
decides it is safe for all instances to suspend together.
To support this usage model:
* Add runtime PM and system PM callbacks in the PCI driver to invoke
the mipi-i3c-hci driver's runtime PM callbacks for each instance.
* Introduce a driver-data flag, control_instance_pm, which opts into
the new parent-managed PM behaviour.
* Ensure the callbacks are only used when the corresponding instance is
operational at suspend time. This is reliable because the operational
state cannot change while the parent device is undergoing a PM
transition, and PCI always performs a runtime resume before system
suspend on current configurations, so that suspend and resume alternate
irrespective of whether it is runtime or system PM.
By that means, parent-managed runtime PM coordination for multi-instance
MIPI I3C HCI PCI devices is provided without altering existing behaviour on
platforms that do not require it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306085338.62955-5-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Some platforms implement the MIPI I3C HCI Multi-Bus Instance capability,
where a single parent device hosts multiple I3C controller instances. In
such designs, the parent - not the individual child instances - may need to
coordinate runtime PM so that all controllers runtime PM callbacks are
invoked in a controlled and synchronized manner.
For example, if the parent enables IBI-wakeup when transitioning into a
low-power state, every bus instance must remain able to receive IBIs up
until that point. This requires deferring the individual controllers'
runtime suspend callbacks (which disable bus activity) until the parent
decides it is safe for all instances to suspend together.
To support this usage model:
* Export the low-level runtime PM suspend and resume helpers so that
the parent can explicitly invoke them.
* Add a new quirk, HCI_QUIRK_RPM_PARENT_MANAGED, allowing platforms to
bypass per-instance runtime PM callbacks and delegate control to the
parent device.
* Move DEFAULT_AUTOSUSPEND_DELAY_MS into the header so it can be shared
by parent-managed PM implementations.
The new quirk allows platforms with multi-bus parent-managed PM
infrastructure to correctly coordinate runtime PM across all I3C HCI
instances.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306085338.62955-4-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Some I3C controllers can be automatically runtime-resumed in order to
handle in-band interrupts (IBIs), meaning that runtime suspend does not
need to be blocked when IBIs are enabled.
For example, a PCI-attached controller in a low-power state may generate
a Power Management Event (PME) when the SDA line is pulled low to signal
the START condition of an IBI. The PCI subsystem will then runtime-resume
the device, allowing the IBI to be received without requiring the
controller to remain active.
Introduce a new quirk, HCI_QUIRK_RPM_IBI_ALLOWED, so that drivers can
opt-in to this capability via driver data.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306085338.62955-3-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Set d3hot_delay to 0 for Intel controllers because a delay is not needed.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260306085338.62955-2-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Simplifies allocations by using a flexible array member in this struct.
Add __counted_by to get extra runtime analysis.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260312001534.24423-1-rosenp@gmail.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Add I3C controller PCI IDs for Intel Nova Lake-H.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20260309075045.52344-1-adrian.hunter@intel.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Allow userspace to request dynamic address assignment, which is
useful for i3cdev devices with broken hot-join support.
This will assign dynamic addresses to all devices on the I3C bus
which are currently unassigned.
Signed-off-by: David Nyström <david.nystrom@est.tech>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Meagan Lloyd <meaganlloyd@linux.microsoft.com>
Link: https://patch.msgid.link/20260219-i3c_rescan-v6-1-b81d6cc3cb30@est.tech
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Instead of checking for the specific error codes (that can be considered
a layering violation to some extent) check for the property existence first
and then either parse it, or apply a default value.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20260219141532.2259642-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Instead of checking for the specific error codes (that can be considered
a layering violation to some extent) check for the property existence first
and then either parse it, or apply a default value.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20260219140532.2259235-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Instead of checking for the specific error codes (that can be considered
a layering violation to some extent) check for the property existence first
and then either parse it, or apply a default value.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20260219141936.2259945-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The ASRock B650I Lightning WiFi motherboard uses an NCT6686D chip with a
customer ID of 0x1633. Without this ID, the nct6683 driver fails to
recognize the hardware on this board, preventing hardware monitoring
from working.
Add NCT6683_CUSTOMER_ID_ASROCK6 (0x1633) to the list of supported customer
IDs and update the probe function to handle it
Signed-off-by: Petr Klotz <pklotz0@protonmail.com>
Link: https://lore.kernel.org/r/20260412000911.9063-2-pklotz0@protonmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Replace sock_kmalloc() followed by memcpy() with sock_kmemdup() to
simplify alg_setkey_by_key_serial().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
CRYPTO_DEV_VMX has been moved to arch/powerpc/crypto/Kconfig, remove it.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The flexible array member 'buffer' in 'omap_sham_reqctx' is always
allocated with BUFLEN bytes. Replace the flexible array with a
fixed-size array and remove the now-redundant 'buflen' field.
Since 'struct omap_sham_reqctx' now includes the buffer, simplify
'reqsize' and 'statesize' and use an offsetof-based memcpy() in
omap_sham_export() and omap_sham_import().
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add a MAINTAINERS entry for the atmel-sha204a driver and Thorsten Blum
as maintainer.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add Thorsten Blum as maintainer of the atmel-ecc driver.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When adf_dev_up() partially completes and then fails, the IRQ
handlers registered during adf_isr_resource_alloc() are not detached
before the MSI-X vectors are released.
Since the device is enabled with pcim_enable_device(), calling
pci_alloc_irq_vectors() internally registers pcim_msi_release() as a
devres action. On probe failure, devres runs pcim_msi_release() which
calls pci_free_irq_vectors(), tearing down the MSI-X vectors while IRQ
handlers (for example 'qat0-bundle0') are still attached. This causes
remove_proc_entry() warnings:
[ 22.163964] remove_proc_entry: removing non-empty directory 'irq/143', leaking at least 'qat0-bundle0'
Moving the devm_add_action_or_reset() before adf_dev_up() does not solve
the problem since devres runs in LIFO order and pcim_msi_release(),
registered later inside adf_dev_up(), would still fire before
adf_device_down().
Fix by calling adf_dev_down() explicitly when adf_dev_up() fails, to
properly free IRQ handlers before devres releases the MSI-X vectors.
Fixes: 17fd7514ae ("crypto: qat - add qat_6xxx driver")
Cc: stable@vger.kernel.org
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Ahsan Atta <ahsan.atta@intel.com>
Reviewed-by: Laurent M Coquerel <laurent.m.coquerel@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Declare 'swap' as zero-initialized and use a single index variable to
simplify the byte-swapping loop in qce_xts_swapiv(). Add a comment for
clarity.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The direction used to map the buffer skreq->iv is DMA_TO_DEVICE but it is
unmapped with direction DMA_BIDIRECTIONAL in the error path.
Change the unmap to match the mapping.
Fixes: 915e4e8413 ("crypto: hisilicon - SEC security accelerator driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Previous commit introduces a new last_request variable in the context
structure.
Renaming the first/last existing member variable in the context
structure to improve readability.
Cc: stable@vger.kernel.org
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since commit c662b043cd ("crypto: af_alg/hash: Support
MSG_SPLICE_PAGES"), the crypto core may pass large scatterlists spanning
multiple pages to drivers supporting ahash operations. As a result, a
driver can now receive large ahash requests.
The SEC1 engine has a limitation where a single descriptor cannot
process more than 32k of data. The current implementation attempts to
handle the entire request within a single descriptor, which leads to
failures raised by the driver:
"length exceeds h/w max limit"
Address this limitation by splitting large ahash requests into multiple
descriptors, each respecting the 32k hardware limit. This allows
processing arbitrarily large requests.
Cc: stable@vger.kernel.org
Fixes: c662b043cd ("crypto: af_alg/hash: Support MSG_SPLICE_PAGES")
Signed-off-by: Paul Louvel <paul.louvel@bootlin.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
jent_kcapi_random() serializes the shared jitterentropy state, but it
currently holds a spinlock across the jent_read_entropy() call. That
path performs expensive jitter collection and SHA3 conditioning, so
parallel readers can trigger stalls as contending waiters spin for
the same lock.
To prevent non-preemptible lock hold, replace rng->jent_lock with a
mutex so contended readers sleep instead of spinning on a shared lock
held across expensive entropy generation.
Fixes: bb5530e408 ("crypto: jitterentropy - add jitterentropy RNG")
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Yuan Tan <yuantan098@gmail.com>
Suggested-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Haixin Xu <jerryxucs@gmail.com>
Reviewed-by: Stephan Mueller <smueller@chronox.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
- sec_register_to_crypto() and sec_unregister_from_crypto()
have been removed, the function declarations have not been
removed. Remove them.
- hisi_qm_start_qp and hisi_qm_stop_qp are called internally by the
QM. Therefore, the EXPORT_SYMBOL_GPL declaration of these
non-public interfaces is deleted.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Variables are assigned before used. Initialization is not required.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Else condition is not needed after a return, remove it.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The "info_name" is never changed in struct qm_cmd_dump_item,
make it const.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
1. The return value val of sec_debugfs_atomic64_get is of the
u64 type, but %lld instead of %llu is used in DEFINE_DEBUGFS_ATTRIBUTE.
Fix it.
2. In debugfs.c, since the types of q_depth and xeq_depth are u16,
the results of q_depth - 1 and xeq_depth - 1 are int rather than
u16. Use %d for int.
Signed-off-by: Zhushuai Yin <yinzhushuai@huawei.com>
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The SoundScape ISA driver has lacked suspend and resume callbacks since
commit 277e926c9b ("[ALSA] sscape - Use platform_device").
A plain snd_wss resume is not sufficient for SoundScape. Resume also
needs to restore the board-specific gate-array routing, and non-VIVO
boards need to reinitialize the probe-time MIDI firmware and MIDI
control state when the MPU-401 side was enabled during probe.
That firmware reload can be handled in-kernel because
commit acd4710091 ("ALSA: sscape: convert to firmware loader framework")
moved the driver to request_firmware().
Add ISA and ISA-PnP PM callbacks, reconfigure the board on resume,
reload the non-VIVO MIDI firmware, restore the MIDI state, and then
resume the WSS codec. If MIDI firmware reload fails, keep the WSS resume
path alive and leave MIDI unavailable instead of failing the whole
device resume.
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260411-alsa-sscape-pm-v2-2-aeb5682e14b0@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The SoundScape driver programs the gate-array directly from the global
resource arrays during probe. That is sufficient for initial bring-up,
but a PM resume path also needs the resolved per-card IRQ, DMA, MPU IRQ
and joystick settings after probe has finished.
Store the resolved resources in struct soundscape and move the board
setup into a reusable helper. Also factor the MIDI state programming so
the same sequence can be reused by a later PM resume path.
This is preparatory work for suspend/resume support and is not intended
to change runtime behaviour.
Signed-off-by: Cássio Gabriel <cassiogabrielcontato@gmail.com>
Link: https://patch.msgid.link/20260411-alsa-sscape-pm-v2-1-aeb5682e14b0@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The check for the minimum receive buffer size did not take the
tag size into account during decryption. Fix this by adding the
required extra length.
Reported-by: syzbot+aa11561819dc42ebbc7c@syzkaller.appspotmail.com
Reported-by: Daniel Pouzzner <douzzer@mega.nu>
Fixes: d887c52d6a ("crypto: algif_aead - overhaul memory management")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Leo reports an out-of-bounds access when parsing a certificate with
empty Basic Constraints or Key Usage extension because the first byte of
the extension is read before checking its length. Fix it.
The bug can be triggered by an unprivileged user by submitting a
specially crafted certificate to the kernel through the keyrings(7) API.
Leo has demonstrated this with a proof-of-concept program responsibly
disclosed off-list.
Fixes: 30eae2b037 ("KEYS: X.509: Parse Basic Constraints for CA")
Fixes: 567671281a ("KEYS: X.509: Parse Key Usage")
Reported-by: Leo Lin <leo@depthfirst.com> # off-list
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Ignat Korchagin <ignat@linux.win>
Cc: stable@vger.kernel.org # v6.4+
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When page reassignment was added to af_alg_pull_tsgl the original
loop wasn't updated so it may try to reassign one more page than
necessary.
Add the check to the reassignment so that this does not happen.
Also update the comment which still refers to the obsolete offset
argument.
Reported-by: syzbot+d23888375c2737c17ba5@syzkaller.appspotmail.com
Fixes: e870456d8e ("crypto: algif_skcipher - overhaul memory management")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sashiko reported the following:
> The struct clk_init_data init is declared on the stack without being
> fully zero-initialized. While fields like name, flags, parent_names,
> num_parents, and ops are explicitly assigned, the parent_data and
> parent_hws fields are left containing stack garbage.
clk_core_populate_parent_map() currently prefers the parent names over
the parent data and hws, so this isn't a problem at the moment. If that
ordering ever changed in the future, then this could lead to some
unexpected crashes. Let's just go ahead and make sure that the struct
clk_init_data is initialized to zero as a good practice.
Fixes: b4cbe606dc ("clk: visconti: Add support common clock driver and reset driver")
Link: https://sashiko.dev/#/patchset/20260326042317.122536-1-rosenp%40gmail.com
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Benoît Monin <benoit.monin@bootlin.com>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.x90@mail.toshiba>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The driver currently supports generating BCLK. There are systems which
require generation of MCLK instead. Register new MCLK clock and handle
clock-cells = <1> to differentiate between BCLK and MCLK. In case of a
legacy system with clock-cells = <0>, the driver behaves as before, i.e.
always returns BCLK.
Note that it is not possible re-use the current SAI audio driver to
generate MCLK and correctly enable and disable the MCLK.
If SAI (audio driver) is used to control the MCLK enablement, then MCLK
clock is not always enabled, and it is not necessarily enabled when the
codec may need the clock to be enabled. There is also no way for the
codec node to specify phandle to clock provider in DT, because the SAI
(audio driver) is not clock provider.
If SAI (clock driver) is used to control the MCLK enablement, then MCLK
clock is enabled when the codec needs the clock enabled, because the
codec is the clock consumer and the SAI (clock driver) is the clock
provider, and the codec driver can request the clock to be enabled when
needed. There is also the usual phandle to clock provider in DT, because
the SAI (clock driver) is clock provider.
Acked-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Marek Vasut <marex@nabladev.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Create helper function fsl_sai_clk_register() to set up and register
SAI clock. Rename BCLK specific struct fsl_sai_clk members with bclk_
prefix. Use of_node_full_name(dev->of_node) and clock name to register
uniquely named clock. This is done in preparation for the follow up
patch, which adds MCLK support.
Signed-off-by: Marek Vasut <marex@nabladev.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The driver now supports generation of both BCLK and MCLK, document
support for #clock-cells = <0> for legacy case and #clock-cells = <1>
for the new case which can differentiate between BCLK and MCLK.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Marek Vasut <marex@nabladev.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The i.MX8M/Mini/Nano/Plus variant of the SAI IP has control registers
shifted by +8 bytes and requires additional bus clock. Add support for
the i.MX8M variant of the IP with this register shift and additional
clock.
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Marek Vasut <marex@nabladev.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Sort the headers. No functional change.
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Marek Vasut <marex@nabladev.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The i.MX8M/Mini/Nano/Plus variant of the SAI IP has control registers
shifted by +8 bytes and requires additional bus clock. Document support
for the i.MX8M variant of the IP with this register shift and additional
clock. Update the description slightly.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Marek Vasut <marex@nabladev.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
