In netem_enqueue(), the packet corruption logic uses
get_random_u32_below(skb_headlen(skb)) to select an index for
modifying skb->data. When an AF_PACKET TX_RING sends fully non-linear
packets over an IPIP tunnel, skb_headlen(skb) evaluates to 0.
Passing 0 to get_random_u32_below() takes the variable-ceil slow path
which returns an unconstrained 32-bit random integer. Using this
unconstrained value as an offset into skb->data results in an
out-of-bounds memory access.
Fix this by verifying skb_headlen(skb) is non-zero before attempting
to corrupt the linear data area. Fully non-linear packets will silently
bypass the corruption logic.
Fixes: c865e5d99e ("[PKT_SCHED] netem: packet corruption option")
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Signed-off-by: Yuan Tan <tanyuan98@outlook.com>
Signed-off-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Yuhang Zheng <z1652074432@gmail.com>
Signed-off-by: Yucheng Lu <kanolyc@gmail.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Link: https://patch.msgid.link/45435c0935df877853a81e6d06205ac738ec65fa.1774941614.git.kanolyc@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=J6YS
-----END PGP SIGNATURE-----
Merge tag 'nf-26-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net. Note that most
of the bugs fixed here are >5 years old. The large PR is not due to an
increase in regressions.
1) Flowtable hardware offload support in IPv6 can lead to out-of-bounds
when populating the rule action array when combined with double-tagged
vlan. Bump the maximum number of actions from 16 to 24 and check that
such limit is never reached, otherwise bail out. This bugs stems from
the original flowtable hardware offload support.
2) nfnetlink_log does not include the netlink header size of the trailing
NLMSG_DONE message when calculating the skb size. From Florian Westphal.
3) Reject names in xt_cgroup and xt_rateest extensions which are not
nul-terminated. Also from Florian.
4) Use nla_strcmp in ipset lookup by set name, since IPSET_ATTR_NAME and
IPSET_ATTR_NAMEREF are of NLA_STRING type. From Florian Westphal.
5) When unregistering conntrack helpers, pass the helper that is going
away so the expectation cleanup is done accordingly, otherwise UaF is
possible when accessing expectation that refer to the helper that is
gone. From Qi Tang.
6) Zero expectation NAT fields to address leaking kernel memory through
the expectation netlink dump when unset. Also from Qi Tang.
7) Use the master conntrack helper when creating expectations via
ctnetlink, ignore the suggested helper through CTA_EXPECT_HELP_NAME.
This allows to address a possible read of kernel memory off the
expectation object boundary.
8) Fix incorrect release of the hash bucket logic in ipset when the
bucket is empty, leading to shrinking the hash bucket to size 0
which deals to out-of-bound write in next element additions.
From Yifan Wu.
9) Allow the use of x_tables extensions that explicitly declare
NFPROTO_ARP support only. This is to avoid an incorrect hook number
validation due to non-overlapping arp and inet hook number
definitions.
10) Reject immediate NF_QUEUE verdict in nf_tables. The userspace
nft tool always uses the nft_queue expression for queueing.
This ensures this verdict cannot be used for the arp family,
which does supported this.
* tag 'nf-26-04-01' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: reject immediate NF_QUEUE verdict
netfilter: x_tables: restrict xt_check_match/xt_check_target extensions for NFPROTO_ARP
netfilter: ipset: drop logically empty buckets in mtype_del
netfilter: ctnetlink: ignore explicit helper on new expectations
netfilter: ctnetlink: zero expect NAT fields when CTA_EXPECT_NAT absent
netfilter: nf_conntrack_helper: pass helper to expect cleanup
netfilter: ipset: use nla_strcmp for IPSET_ATTR_NAME attr
netfilter: x_tables: ensure names are nul-terminated
netfilter: nfnetlink_log: account for netlink header size
netfilter: flowtable: strictly check for maximum number of actions
====================
Link: https://patch.msgid.link/20260401103646.1015423-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iIkEABYKADEWIQSl+MghEFFAdY3pYJLMOmT6rpmt0gUCaczJHBMcbWtsQHBlbmd1
dHJvbml4LmRlAAoJEMw6ZPquma3ST7UA/jiqjNrcEJlY2wOBfq103IeCPIIoP/Ys
2mheO9GofkwwAQCj6CpLd6wiVX/Ht4j0QW5pDRm+4+zBkg5Tc6QZpyiPDw==
=2+yi
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-7.1-20260401' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2026-04-01
The first patch is by Ethan Nelson-Moore and removes a useless copy of
PCI_DEVICE_DATA from the ctucanfd driver.
Geert Uytterhoeven's patch for the rcar_can converts the driver to use
the FIELD_MODIFY macro.
Viken Dadhaniya contributes 2 patches for the mcp251xfd driver that
add transceiver standby control.
The last 2 aptches are by Johan Hovold and refactor the usb endpoint
lookup of the kvaser_usb and ucan driver.
* tag 'linux-can-next-for-7.1-20260401' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: ucan: refactor endpoint lookup
can: rcar_can: Convert to FIELD_MODIFY()
can: mcp251xfd: add support for XSTBYEN transceiver standby control
can: kvaser_usb: leaf: refactor endpoint lookup
net: can: ctucanfd: remove useless copy of PCI_DEVICE_DATA macro
dt-bindings: can: mcp251xfd: add microchip,xstbyen property
====================
Link: https://patch.msgid.link/20260401073338.5592-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ6NaUOruQGUkvPdG4raS+Z+3y5EwUCac2n1wAKCRAraS+Z+3y5
E7INAPwOyqMJws2kswrIPZ8jqfaBIcNVe9MM9a9Ldp8qZmWUHAD/ayqW4hHP6eMA
WBNcVCDGStYeI4lyINS5AqPN8mMhOAI=
=iquL
-----END PGP SIGNATURE-----
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Martin KaFai Lau says:
====================
pull-request: bpf-next 2026-04-01
We've added 2 non-merge commits during the last 2 day(s) which contain
a total of 3 files changed, 139 insertions(+), 23 deletions(-).
The main changes are:
1) skb_dst_drop(skb) when bpf prog does a encap or decap,
from Jakub Kicinski
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next:
selftests/bpf: Test that dst is cleared on same-protocol encap
net: Clear the dst when performing encap / decap
====================
Link: https://patch.msgid.link/20260401233956.4133413-1-martin.lau@linux.dev
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the kfree() call outside the critical section to reduce lock
holding time. This aligns with the general principle of minimizing
work under locks.
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260331122604.1933-1-lirongqing@baidu.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is already an 'if PPP' condition wrapping several config options
e.g. PPP_MPPE and PPPOE, making the 'depends on PPP' statement for each of
these a duplicate dependency (dead code).
I propose leaving the outer 'if PPP...endif' and removing the individual
'depends on PPP' statement from each option.
This dead code was found by kconfirm, a static analysis tool for Kconfig.
Signed-off-by: Julian Braha <julianbraha@gmail.com>
Reviewed-by: Qingfang Deng <dqfext@gmail.com>
Link: https://patch.msgid.link/20260330213258.13982-1-julianbraha@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move ip6_dst_hoplimit() to net/ipv6/ip6_output.c so that compiler
can (auto)inline it from ip6_xmit().
$ scripts/bloat-o-meter -t vmlinux.0 vmlinux.1
add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-11 (-11)
Function old new delta
ip6_xmit 1684 1673 -11
Total: Before=29655407, After=29655396, chg -0.00%
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Fernando Fernandez Mancera <fmancera@suse.de>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260331174722.4128061-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rds_ib_get_mr() extracts the rds_ib_connection from conn->c_transport_data
and passes it to rds_ib_reg_frmr() for FRWR memory registration. On a
fresh outgoing connection, ic is allocated in rds_ib_conn_alloc() with
i_cm_id = NULL because the connection worker has not yet called
rds_ib_conn_path_connect() to create the rdma_cm_id. When sendmsg() with
RDS_CMSG_RDMA_MAP is called on such a connection, the sendmsg path parses
the control message before any connection establishment, allowing
rds_ib_post_reg_frmr() to dereference ic->i_cm_id->qp and crash the
kernel.
The existing guard in rds_ib_reg_frmr() only checks for !ic (added in
commit 9e630bcb77), which does not catch this case since ic is allocated
early and is always non-NULL once the connection object exists.
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:rds_ib_post_reg_frmr+0x50e/0x920
Call Trace:
rds_ib_post_reg_frmr (net/rds/ib_frmr.c:167)
rds_ib_map_frmr (net/rds/ib_frmr.c:252)
rds_ib_reg_frmr (net/rds/ib_frmr.c:430)
rds_ib_get_mr (net/rds/ib_rdma.c:615)
__rds_rdma_map (net/rds/rdma.c:295)
rds_cmsg_rdma_map (net/rds/rdma.c:860)
rds_sendmsg (net/rds/send.c:1363)
____sys_sendmsg
do_syscall_64
Add a check in rds_ib_get_mr() that verifies ic, i_cm_id, and qp are all
non-NULL before proceeding with FRMR registration, mirroring the guard
already present in rds_ib_post_inv(). Return -ENODEV when the connection
is not ready, which the existing error handling in rds_cmsg_send() converts
to -EAGAIN for userspace retry and triggers rds_conn_connect_if_down() to
start the connection worker.
Fixes: 1659185fb4 ("RDS: IB: Support Fastreg MR (FRMR) memory registration mode")
Reported-by: Xiang Mei <xmei5@asu.edu>
Signed-off-by: Weiming Shi <bestswngs@gmail.com>
Reviewed-by: Allison Henderson <achender@kernel.org>
Link: https://patch.msgid.link/20260330163237.2752440-2-bestswngs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fib6_metric_set() may be called concurrently from softirq context without
holding the FIB table lock. A typical path is:
ndisc_router_discovery()
spin_unlock_bh(&table->tb6_lock) <- lock released
fib6_metric_set(rt, RTAX_HOPLIMIT, ...) <- lockless call
When two CPUs process Router Advertisement packets for the same router
simultaneously, they can both arrive at fib6_metric_set() with the same
fib6_info pointer whose fib6_metrics still points to dst_default_metrics.
if (f6i->fib6_metrics == &dst_default_metrics) { /* both CPUs: true */
struct dst_metrics *p = kzalloc_obj(*p, GFP_ATOMIC);
refcount_set(&p->refcnt, 1);
f6i->fib6_metrics = p; /* CPU1 overwrites CPU0's p -> p0 leaked */
}
The dst_metrics allocated by the losing CPU has refcnt=1 but no pointer
to it anywhere in memory, producing a kmemleak report:
unreferenced object 0xff1100025aca1400 (size 96):
comm "softirq", pid 0, jiffies 4299271239
backtrace:
kmalloc_trace+0x28a/0x380
fib6_metric_set+0xcd/0x180
ndisc_router_discovery+0x12dc/0x24b0
icmpv6_rcv+0xc16/0x1360
Fix this by:
- Set val for p->metrics before published via cmpxchg() so the metrics
value is ready before the pointer becomes visible to other CPUs.
- Replace the plain pointer store with cmpxchg() and free the allocation
safely when competition failed.
- Add READ_ONCE()/WRITE_ONCE() for metrics[] setting in the non-default
metrics path to prevent compiler-based data races.
Fixes: d4ead6b34b ("net/ipv6: move metrics from dst to rt6_info")
Reported-by: Fei Liu <feliu@redhat.com>
Reviewed-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260331-b4-fib6_metric_set-kmemleak-v3-1-88d27f4d8825@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The function helps to XOR bitmaps and calculate Hamming weight of
the result in one pass.
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Yury Norov <ynorov@nvidia.com>
Currently Linux does not implement ACPI ClockInput() resource to describe
clocks, unlike DT. However the xiic driver is happy if something
magically enables the clock before the driver probes, and does not
turn it off again. The clock should always be considered optional for
ACPI.
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260223-i2c-xiic-v12-7-b6c9ce4e4f3c@nexthop.ai
Switch from i2c_add_adapter() to i2c_add_numbered_adapter() to enable
platforms to specify fixed I2C bus numbers via the platform device ID.
This allows systems to maintain consistent bus numbering across reboots.
On platforms where the device ID is PLATFORM_DEVID_NONE (the default),
the adapter falls back to dynamic allocation, preserving backward
compatibility.
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260223-i2c-xiic-v12-6-b6c9ce4e4f3c@nexthop.ai
Use standard resource format specifier %pR in debug log.
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260223-i2c-xiic-v12-5-b6c9ce4e4f3c@nexthop.ai
Use generic device property accessors making them work for ACPI
platforms.
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260223-i2c-xiic-v12-3-b6c9ce4e4f3c@nexthop.ai
The devm_request_threaded_irq() already prints an error message. Remove
the duplicate.
Signed-off-by: Abdurrahman Hussain <abdurrahman@nexthop.ai>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260223-i2c-xiic-v12-2-b6c9ce4e4f3c@nexthop.ai
commit 66d88e16f2 ("dmaengine: fsl-edma: read/write multiple registers
in cyclic transactions") causes fsl_edma_fill_tcd() to read
dst_port_window_size and src_port_window_size when building transfer
control descriptors.
Initialize the structure so unset fields are explicitly zero.
Fixes: 66d88e16f2 ("dmaengine: fsl-edma: read/write multiple registers in cyclic transactions")
Signed-off-by: Anthony Pighin <anthony.pighin@nokia.com>
Cc: <stable@vger.kernel.org> # v6.14+
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260331182632.888110-1-anthony.pighin@nokia.com
Configuring the io_alloc_cbm interface requires an explicit domain ID for each
cache domain. On systems with high core counts and numerous cache clusters,
this requirement becomes cumbersome for automation and management tasks that
aim to apply a uniform policy.
Introduce a wildcard domain ID selector "*" for the io_alloc_cbm interface.
This enables users to set the same Capacity Bitmask (CBM) across all cache
domains in a single operation.
Signed-off-by: Aaron Tomlin <atomlin@atomlin.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://patch.msgid.link/20260325001159.447075-3-atomlin@atomlin.com
The last_cmd_status file is intended to report details about the most recent
resctrl filesystem operation, specifically to aid in diagnosing failures.
However, when parsing io_alloc_cbm, if a user provides a domain ID that does
not exist in the resource, the operation fails with -EINVAL without updating
last_cmd_status. This results in inconsistent behaviour where the system call
returns an error, but last_cmd_status misleadingly reports "ok", leaving the
user unaware that the failure was caused by an invalid domain ID.
Write an error message to last_cmd_status when the target domain ID cannot
be found.
Fixes: 28fa2cce7a ("fs/resctrl: Introduce interface to modify io_alloc capacity bitmasks")
Suggested-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Aaron Tomlin <atomlin@atomlin.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Link: https://patch.msgid.link/20260325001159.447075-2-atomlin@atomlin.com
Add support for the internal I2C controllers of RTL9607C series based
SoCs. Add register definitions, chip-specific functions and macros too.
Make use of the clk introduced from the previous patch to get the clk_div
value and use it during the rtl9607c channel configuration.
Introduce a new EXT_SCK_5MS field to the reg fields struct which is going
to be initialized by rtl9607c init function at the end of the probe.
This patch depends on all the previous patches in this patch series.
Signed-off-by: Rustam Adilov <adilov@disroot.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260401180648.337834-9-adilov@disroot.org
Due to the very nature of differences between RTL9607C i2c controller
and RTL9300 / RTL9310 that are incompatible with each other in some areas
of this driver, for example in clock configuration, channel configuration
and initialization at the end of the probe, introduce new function
properties to the driver data struct to handle those differences.
With these new properties, create configuration functions for RTL9300 and
RTL9310 and assign them to their respective driver data structs.
Signed-off-by: Rustam Adilov <adilov@disroot.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260401180648.337834-8-adilov@disroot.org
In RTL9607C i2c controller, there is 10 bit CLK_DIV field for
setting the clock of i2c interface which depends on the rate
of i2c clk (which seems be fixed to 62.5MHz according to Realtek SDK).
Introduce the clk struct and the respective F_CLK_DIV and clk_div
which are going to be used in the upcoming patch for rtl9607c i2c
controller support addition.
devm_clk_get_optional_enabled() function was used for cleaner code
as it automatically returns NULL if the clk is not present, which is
going to be the case for RTL9300 and RTL9310 i2c controllers.
Signed-off-by: Rustam Adilov <adilov@disroot.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260401180648.337834-7-adilov@disroot.org
Add the "realtek,rtl9607-i2c" compatible for i2c controller on the
RTL9607C SoC series.
Add a clocks property to the properties to describe the i2c reference
clock and make it available for all the compatibles. This i2c reference
clock is assumed to be coming from switchcore region via Lexra bus as
the other SoC peripherals.
According to the info available about the existing devices, they also
have the i2c master controller clocks.
RTL9607C requires the "realtek,scl" and "clocks" to be specified
and so handle it under separate if check for "realtek,rtl9607-i2c".
Signed-off-by: Rustam Adilov <adilov@disroot.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260401180648.337834-6-adilov@disroot.org
In RTL9607C i2c controller, in order to indicate that the width of
memory address is 8 bits, 0 is written to MEM_ADDR_WIDTH field as
opposed to 1 for RTL9300 and RTL9310.
Introduce a new property to a driver data to indicate what value
need to written to MEM_ADDR_WIDTH field for this case.
Signed-off-by: Rustam Adilov <adilov@disroot.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260401180648.337834-5-adilov@disroot.org
In RTL9607C i2c controller the busy check operation is done on the
separate bit of the command register as opposed to self clearing
command trigger bit on the rtl9300 and rtl9310 i2c controllers.
Introduce a new F_BUSY field to the reg_fields struct for that
and change the regmap read poll function to use F_BUSY
instead of I2C_TRIG.
Signed-off-by: Rustam Adilov <adilov@disroot.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260401180648.337834-4-adilov@disroot.org
In RTL9607C i2c controller, theoretical maximum the data length
can be is 4 bytes as opposed to 16 bytes on rtl9300 and rtl9310.
Introduce a new property to the driver data struct for that.
Adjust if statement in prepare_xfer function to follow that new
property instead of the hardcoded value.
Signed-off-by: Rustam Adilov <adilov@disroot.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260401180648.337834-3-adilov@disroot.org
In RTL9607C i2c controller, there are 2 separate registers for reads
and writes as opposed the combined 1 on rtl9300 and rtl9310.
In preparation for RTL9607C support, split it up into rd_reg and wd_reg
properties and change the i2c read and write functions accordingly.
Signed-off-by: Rustam Adilov <adilov@disroot.org>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260401180648.337834-2-adilov@disroot.org
- Updates MAINTAINERS file to include i.MX team coverage for ARM NXP platforms
- Sets default values for OPACR (Off-Platform Peripheral Access Control
Register) in the i.MX AIPSTZ bus driver
-----BEGIN PGP SIGNATURE-----
iQHFBAABCgAvFiEEJS45w2QNr0ezLVaoNF3oRQ23YkwFAmnFk5URHGZyYW5rLmxp
QG54cC5jb20ACgkQNF3oRQ23YkxWxgwAyKOXAFEb8nD9qGmOvd+dsopZ91ZZLCun
lqBDWz0B+IpPFGwO7NzpWjEcyeMJWAPpKzmRtaSETrCEymoIISm87CgDlrTsRTKi
THLFk3fh6vT0JDCu3RzqYW4KLdb29p7ejVqcCzqcyAP5IjX1AN7HuBLI7Qd1CaHO
tfU6+STyFrkRrMQv2y6ce04vv4DNWbnDSv7Z3/1lsk7s4VuQMS7yDPsL7k75t+Wo
fqRu3nKBMok+XWtxHHaE04zZNvnQcBbY7FSR8XGhNOlSDv2l9rRxh4rlcFvpum4Q
gbzqXa4zEmczZtn1c7YcP5ieMHGPrEuM1xYXi6k9io5xhD/4UIG1Q4jNTeZMw/vZ
pjqnqNFeqMyy8ZcclYTvcUN0Mwqt1h83NsgD4qsly9Ofl8Q59BA58ZYJvOUjJ7wn
25yKDB3WRClJFGhZnfAQG33yGt2xMOXjuV9bC7byWx263/WM0P5ll77YOneansj1
2DA9kjss2QrrRVryeVpuZpnc6iRDIwNl
=/y4n
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=omNE
-----END PGP SIGNATURE-----
Merge tag 'imx-soc-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/frank.li/linux into soc/drivers
i.MX SoC update for 7.1:
- Updates MAINTAINERS file to include i.MX team coverage for ARM NXP platforms
- Sets default values for OPACR (Off-Platform Peripheral Access Control
Register) in the i.MX AIPSTZ bus driver
* tag 'imx-soc-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/frank.li/linux:
MAINTAINERS: Add i.MX team to all arm NXP platforms
bus: imx-aipstz: set default value for opacr registers
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Some SFP modules on certain switches (for example the ONTi ONT-S508CL-8S and
XikeStor SKS8300-8X) exhibit unreliable I2C communication at the currently
supported speeds. Add support for 50 kHz and 2.5 MHz I2C bus modes on the
RTL9300 to improve compatibility with these devices.
Signed-off-by: Jan Kantert <jan-kernel@kantert.net>
Reviewed-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20260227111134.2163701-1-jan-kernel@kantert.net
ism_vfio_pci is a new kernel component that allows
to use the ISM device from userspace. Add myself
as a maintainer.
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Julian Ruess <julianr@linux.ibm.com>
Link: https://lore.kernel.org/r/20260325-vfio_pci_ism-v8-3-ddc504cde914@linux.ibm.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Add a vfio_pci variant driver for the s390-specific Internal Shared
Memory (ISM) devices used for inter-VM communication.
This enables the development of vfio-pci-based user space drivers for
ISM devices.
On s390, kernel primitives such as ioread() and iowrite() are switched
over from function-handle-based PCI load/stores instructions to PCI
memory-I/O (MIO) loads/stores when these are available and not
explicitly disabled. Since these instructions cannot be used with ISM
devices, ensure that classic function-handle-based PCI instructions are
used instead.
The driver is still required even when MIO instructions are disabled, as
the ISM device relies on the PCI store block (PCISTB) instruction to
perform write operations.
Stores are not fragmented, therefore one ioctl corresponds to exactly
one PCISTB instruction. User space must ensure to not write more than
4096 bytes at once to an ISM BAR which is the maximum payload of the
PCISTB instruction.
Reviewed-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Julian Ruess <julianr@linux.ibm.com>
Reviewed-by: Farhan Ali <alifm@linux.ibm.com>
Link: https://lore.kernel.org/r/20260325-vfio_pci_ism-v8-2-ddc504cde914@linux.ibm.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
The test constantly fails on my Intel hybrid machine. The issue was it
has two events in the output even if I only gave it one event.
$ perf stat -e instructions -- perf test -w sqrtloop
Performance counter stats for 'perf test -w sqrtloop':
910,856,421 cpu_atom/instructions/ (28.05%)
14,852,865,997 cpu_core/instructions/ (96.79%)
1.014313341 seconds time elapsed
1.004114000 seconds user
0.008174000 seconds sys
Let's modify the awk script to add the values for each line and print
the total. The variable 'i' has a number of input lines that have valid
output and variable 'c' has the sum of actual counter values. That way
it should work on any platforms.
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Writing to the test output files in the current working directory can
fail in various contexts such as continual test. Other tests write to
a mktemp-ed file, make the "perf script task-analyszer tests" follow
this convention too. Currently this isn't possible for the perf.data
file due to a lack of perf script support, add a variable for when
this support is available.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
The index into the cpumap array and the number of entries within the
array can never be negative, so let's make them unsigned. This is
prompted by reports that gcc 13 with -O6 is giving a
alloc-size-larger-than errors. The change makes the cpumap changes and
then updates the declaration of index variables throughout perf and
libperf to be unsigned. The two things are hard to separate as
compiler warnings about mixing signed and unsigned types breaks the
build.
Reported-by: Chingbin Li <liqb365@163.com>
Closes: https://lore.kernel.org/lkml/20260212025127.841090-1-liqb365@163.com/
Tested-by: Chingbin Li <liqb365@163.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Highlights:
----------
Stm32 SoCs embed debug peripherals such as Coresight. These peripherals
can monitor the activity of the cores. Because of that, they can be
used only if some features in the debug configuration are enabled.
Else, errors or firewall exceptions can be observed. Similarly to
the ETZPC(on stm32mp1x platforms) or the RIFSC(on stm32mp2x platforms),
debug-related peripherals access can be assessed at bus level to
prevent these issues from happening.
The debug configuration can only be accessed by the secure world.
That means that a service must be implemented in the secure world for
the kernel to check the firewall configuration. On OpenSTLinux, it is
done through a Debug access PTA in OP-TEE [1].
To represent the debug peripherals present on a dedicated debug bus,
create a debug bus node in the device tree and the associated driver
that will interact with this PTA.
Plus some fixes.
-----BEGIN PGP SIGNATURE-----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=f7UB
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=gD+b
-----END PGP SIGNATURE-----
Merge tag 'stm32-bus-firewall-for-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/drivers
STM32 Firewall bus for v7.1, round 1
Highlights:
----------
Stm32 SoCs embed debug peripherals such as Coresight. These peripherals
can monitor the activity of the cores. Because of that, they can be
used only if some features in the debug configuration are enabled.
Else, errors or firewall exceptions can be observed. Similarly to
the ETZPC(on stm32mp1x platforms) or the RIFSC(on stm32mp2x platforms),
debug-related peripherals access can be assessed at bus level to
prevent these issues from happening.
The debug configuration can only be accessed by the secure world.
That means that a service must be implemented in the secure world for
the kernel to check the firewall configuration. On OpenSTLinux, it is
done through a Debug access PTA in OP-TEE [1].
To represent the debug peripherals present on a dedicated debug bus,
create a debug bus node in the device tree and the associated driver
that will interact with this PTA.
Plus some fixes.
* tag 'stm32-bus-firewall-for-7.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
pinctrl: stm32: add firewall checks before probing the HDP driver
drivers: bus: add the stm32 debug bus driver
bus: stm32_firewall: add stm32_firewall_get_grant_all_access() API
bus: stm32_firewall: allow check on different firewall controllers
dt-bindings: bus: document the stm32 debug bus
dt-bindings: pinctrl: document access-controllers property for stm32 HDP
dt-bindings: document access-controllers property for coresight peripherals
bus: rifsc: fix RIF configuration check for peripherals
bus: rifsc: Replace snprintf("%s") with strscpy
bus: stm32_firewall: Simplify with scoped for each OF child loop
bus: firewall: move stm32_firewall header file in include folder
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This batch mainly improves SCMI robustness on systems where the SCP does
not generate completion interrupts, and includes two small follow-up
cleanups in the SCMI core.
The main functional change adds support for the new DT property
'arm,no-completion-irq'. When present for mailbox/shared-memory based
SCMI implementations, the driver forces SCMI operations into polling
mode so affected platforms can continue to operate even with broken
firmware interrupt behavior.
In addition, it
- replaces open-coded size rounding in the base protocol path with
round_up() for clarity, with no functional change
- updates the SCMI quirk snippet macro implementation so quirk handlers
can use break and continue directly when invoked inside loop contexts
-----BEGIN PGP SIGNATURE-----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=5Gaw
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=vQ0q
-----END PGP SIGNATURE-----
Merge tag 'scmi-updates-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into soc/drivers
Arm SCMI updates for v7.1
This batch mainly improves SCMI robustness on systems where the SCP does
not generate completion interrupts, and includes two small follow-up
cleanups in the SCMI core.
The main functional change adds support for the new DT property
'arm,no-completion-irq'. When present for mailbox/shared-memory based
SCMI implementations, the driver forces SCMI operations into polling
mode so affected platforms can continue to operate even with broken
firmware interrupt behavior.
In addition, it
- replaces open-coded size rounding in the base protocol path with
round_up() for clarity, with no functional change
- updates the SCMI quirk snippet macro implementation so quirk handlers
can use break and continue directly when invoked inside loop contexts
* tag 'scmi-updates-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Support loop control in quirk code snippets
firmware: arm_scmi: Use round_up() for base protocol list size calculation
firmware: arm_scmi: Implement arm,no-completion-irq property
dt-bindings: firmware: arm,scmi: Document arm,no-completion-irq property
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add a goto label in clk_register_vco_pll(), unregister vco_clk
if tpll_clk is failed to be registered.
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20260325062204.169648-1-lihaoxiang@isrc.iscas.ac.cn
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
1. TegraMC:
- Few fixes for older issues - missing clock on Tegra264,
missing enabling of DLL for Tegra30 and Tegra124.
- Simplify the code in a few places.
- Rework handling interrupts on different variants and add support for
error logging on Tegra 264.
2. Drop Baikal SoC bt1-l2-ctl driver, because SoC support is being
removed tree-wide.
-----BEGIN PGP SIGNATURE-----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=AJYZ
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=VH6z
-----END PGP SIGNATURE-----
Merge tag 'memory-controller-drv-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl into soc/drivers
Memory controller drivers for v7.1
1. TegraMC:
- Few fixes for older issues - missing clock on Tegra264,
missing enabling of DLL for Tegra30 and Tegra124.
- Simplify the code in a few places.
- Rework handling interrupts on different variants and add support for
error logging on Tegra 264.
2. Drop Baikal SoC bt1-l2-ctl driver, because SoC support is being
removed tree-wide.
* tag 'memory-controller-drv-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-mem-ctrl:
memory: tegra: Add MC error logging support for Tegra264
memory: tegra: Prepare for supporting multiple intmask registers
memory: tegra: Group SoC specific fields
memory: tegra: Add support for multiple IRQs
memory: tegra: Group register and fields
memory: tegra: Group error handling related registers
memory: tegra-mc: Use %pe format
memory: tegra-mc: Simplify printing PTR_ERR with dev_err_probe
memory: tegra-mc: Drop tegra_mc_setup_latency_allowance() return value
memory: renesas-rpc-if: Simplify printing PTR_ERR with dev_err_probe
memory: brcmstb_memc: Expand LPDDR4 check to cover for LPDDR5
dt-bindings: cache: bt1-l2-ctl: Remove unused bindings
memory: bt1-l2-ctl: Remove not-going-to-be-supported code for Baikal SoC
memory: tegra30-emc: Fix dll_change check
memory: tegra124-emc: Fix dll_change check
memory: tegra: Add support for DBB clock on Tegra264
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Few cleanups in ACPM firmware drivers, used on Google GS101 and newer
Samsung Exynos SoCs. Notable change is removing 'const' in
'struct acpm_handle' pointers, because even though the code does not
modify pointed data, it immediately drops the const via cast. Also code
is not logically readable when a reference getters/putters (e.g.
acpm_handle_put()) take a pointer to const, because the meaning of "get"
and "put" implies changing the memory, even if that changeable field is
outside of pointed data.
-----BEGIN PGP SIGNATURE-----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=BDkF
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmnNkaAACgkQmmx57+YA
GNmSQg//W+MuGGRlNQr5gZPzmDWhisuYj/rJK7I4Lc/Ukg5LTHWJDB9hpRkUPV1q
5vdArhURcwWpP8tcqz6ouursLiZShOn4bIllb7wPg9dSSEfzW33jytj2tWgFKKXx
oV3uKrPJcwglwEhPBv57/hC+nk2C5pWUxiwqMrni2L/NZZM7MeM0qtFPUadRVtE8
SZ3RupwE/eQ2IvFXbAyM7dqzPTO0H0xVMNjnfbMkuVT75316/Oy/d+Eu2aHlL5x9
T1AydFOTNdMygb3XNNBECTYdUTyJ4bodeKly0EHSZXIvzO3nzjbeY022vka2jLhM
4wT8ussjGY+SWNc/nEsqdwQVcVRF1Gg6v8qEEyC5S8IG0Ug1x26FbU+iu2dWOkfD
2MM2cEGsVE05rjlI9rFzPdu6UMl28GFqpGLTEzq4kIYLdutLr6kDnIs9azJbvHuR
v2y/jJL3TrJlOQ24VsrLmvp/k0Aj14O1qO7BHiNcC9DVJMp8h4cwrgpauE5nJn8z
kRoYvpAwSvL3A7xlBaiV8shX6LjQrltvYSFZnDFKMqArh0DuoVHrL3vuysiknKdP
72ghXc17RkxTbvdv971ou/YxYoQ3DYbPA2YlJ7NFeE1SQdp09VK1BFBw5E1pfrN1
MHSbxmqGKJME1rUTGdZUlbFl6Bf2RooStiwmDvfttIpgkLk9j40=
=T6Y1
-----END PGP SIGNATURE-----
Merge tag 'samsung-drivers-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/drivers
Samsung SoC drivers for v7.1
Few cleanups in ACPM firmware drivers, used on Google GS101 and newer
Samsung Exynos SoCs. Notable change is removing 'const' in
'struct acpm_handle' pointers, because even though the code does not
modify pointed data, it immediately drops the const via cast. Also code
is not logically readable when a reference getters/putters (e.g.
acpm_handle_put()) take a pointer to const, because the meaning of "get"
and "put" implies changing the memory, even if that changeable field is
outside of pointed data.
* tag 'samsung-drivers-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
firmware: exynos-acpm: Drop fake 'const' on handle pointer
dt-bindings: firmware: google,gs101-acpm-ipc: add S2MPG11 secondary PMIC
firmware: exynos-acpm: Count acpm_xfer buffers with __counted_by_ptr
firmware: exynos-acpm: Count number of commands in acpm_xfer
firmware: exynos-acpm: Use unsigned int for acpm_pmic_linux_errmap index
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A follow-up patch adds a new variant driver for s390 ISM devices. Since
this device uses a 256 TiB BAR 0 that is never mapped, the variant
driver needs its own ISM_VFIO_PCI_OFFSET_MASK. To minimally mirror the
functionality of vfio_pci_config_rw() with such a custom mask, export
vfio_config_do_rw(). To better distinguish the now exported function
from vfio_pci_config_rw(), rename it to vfio_pci_config_rw_single()
emphasizing that it does a single config space read or write.
Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Julian Ruess <julianr@linux.ibm.com>
Link: https://lore.kernel.org/r/20260325-vfio_pci_ism-v8-1-ddc504cde914@linux.ibm.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
