memcg_reparent_list_lrus() clears the dying memcg's xarray entry with
xas_store(&xas, NULL) before reparenting its per-node lists into the
parent. This opens a window where a concurrent list_lru_del() arriving
for the dying memcg sees xa_load() == NULL, walks to the parent in
lock_list_lru_of_memcg(), takes the parent's per-node lock, and calls
list_del_init() on an item still physically linked on the dying memcg's
list.
If another in-flight thread holds the dying memcg's per-node lock at the
same moment (another list_lru_del, or a list_lru_walk_one running an
isolate callback), both threads modify ->next/->prev pointers on the same
physical list under different locks. Adjacent items can corrupt each
other's links.
Fix it by reversing the order: reparent each per-node list and mark the
child's list lru dead and then clear the xarray entry. Any concurrent
list_lru op that finds the still-set xarray entry either takes the dying
memcg's per-node lock (synchronizing with the drain) or sees LONG_MIN and
walks to the parent, where the items now live.
Link: https://lore.kernel.org/20260601161501.1444829-1-shakeel.butt@linux.dev
Fixes: fb56fdf8b9 ("mm/list_lru: split the lock to per-cgroup scope")
Signed-off-by: Shakeel Butt <shakeel.butt@linux.dev>
Reported-by: Chris Mason <clm@fb.com>
Reviewed-by: Kairui Song <kasong@tencent.com>
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Commit 65edfda6f3 ("mm/rmap: extend rmap and migration support
device-private entries") updated set_pmd_migration_entry() to use
pmdp_huge_get_and_clear() in the softleaf case, but made no further
adjustments to the function itself.
Therefore this function continues to incorrectly use pmd_write(),
pmd_soft_dirty() and pmd_uffd_wp() to determine whether the installed
migration entry should be marked writable, softdirty or uffd-wp
respectively.
Whilst all are incorrect, the most problematic of these is pmd_write(), as
this can lead to corrupted rmap state.
On x86-64 _PAGE_SWP_SOFT_DIRTY is aliased to _PAGE_RW. So calling
pmd_write() on a softleaf will return the softdirty state encoded in the
entry, assuming CONFIG_MEM_SOFT_DIRTY was enabled.
This was observed when running the hmm.hmm_device_private.anon_write_child
selftest:
1. The test faults in a range then migrates it such that a device-private
THP range is established.
2. The parent then migrates it to a device-private writable PMD entry whose
folio is entirely AnonExclusive with entire_mapcount=1, softdirty set
(accidentally correct write state).
3. The parent forks and the PMD entries are set to device-private read only
entries, entire_mapcount=2, softdirty still set.
4. [BUG] The child writes to the range then migrates to RAM - intending to
install non-writable migration entries - but replacing parent and child
PMD mappings with WRITABLE entries due to misinterpreting the softdirty
bit.
5. In remove_migration_pmd(), if !softleaf_is_migration_read(entry) we
set the RMAP_EXCLUSIVE flag when calling folio_add_anon_rmap_pmd() for
both parent and child, which are therefore AnonExclusive.
6. [SPLAT] Child sets migrated folio entire_mapcount=1, parent sets
entire_mapcount=2 and we end up with an AnonExclusive folio with
entire_mapcount=2! Assert fires in __folio_add_anon_rmap():
VM_WARN_ON_FOLIO(folio_test_large(folio) &&
folio_entire_mapcount(folio) > 1 &&
PageAnonExclusive(cur_page), folio)
This patch fixes the issue by correctly referencing the softleaf entry
fields for writable, softdirty and uffd-wp in set_pmd_migration_entry().
It also only updates A/D flags if the entry is present as these are
otherwise not meaningful for a softleaf entry.
This patch also flips the if (!present) { ... } else { ... } logic in
set_pmd_migration_entry() so it is easier to understand, and adds some
comments to make things clearer.
I was able to bisect this to commit 775465fd26 ("lib/test_hmm: add zone
device private THP test infrastructure") which first exposes this bug as
it was the commit that permitted test_hmm to generate the test.
However commit 65edfda6f3 ("mm/rmap: extend rmap and migration support
device-private entries") is the commit that actually enabled this
behaviour.
Link: https://lore.kernel.org/20260601083044.57132-1-ljs@kernel.org
Fixes: 65edfda6f3 ("mm/rmap: extend rmap and migration support device-private entries")
Signed-off-by: Lorenzo Stoakes <ljs@kernel.org>
Acked-by: David Hildenbrand (Arm) <david@kernel.org>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Reviewed-by: Balbir Singh <balbirs@nvidia.com>
Reviewed-by: Baolin Wang <baolin.wang@linux.alibaba.com>
Reviewed-by: Oscar Salvador (SUSE) <osalvador@kernel.org>
Reviewed-by: Barry Song <baohua@kernel.org>
Reviewed-by: Lance Yang <lance.yang@linux.dev>
Reviewed-by: Zi Yan <ziy@nvidia.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Nico Pache <npache@redhat.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Wei Yang <richard.weiyang@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
DAMON_LRU_SORT allocates the damon_ctx object for its kdamond in its init
function. damon_lru_sort_enabled_store() wrongly assumes the allocation
will always succeed once tried. If the damon_ctx allocation was failed,
therefore, code execution reaches to damon_commit_ctx() while 'ctx' is
NULL. As a result, it dereferences the NULL 'ctx' pointer. Avoid the
NULL dereference by returning -ENOMEM if 'ctx' is NULL.
Link: https://lore.kernel.org/20260529000104.7006-3-sj@kernel.org
Fixes: c4a8e662c8 ("mm/damon/lru_sort: use damon_initialized()")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 6.18.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon/{reclaim,lru_sort}: handle ctx allocation failures".
DAMON_RECLAIM and DAMON_LRU_SORT could dereference NULL pointers if their
damon_ctx object allocations fail. The bugs are expected to happen
infrequently because the allocations are arguably too small to fail on
common setups. But theoretically they are possible and the consequences
are bad. Fix those.
The issues were discovered [1] by Sashiko.
This patch (of 2):
DAMON_RECLAIM allocates the damon_ctx object for its kdamond in its init
function. damon_reclaim_enabled_store() wrongly assumes the allocation
will always succeed once tried. If the damon_ctx allocation was failed,
therefore, code execution reaches to damon_commit_ctx() while 'ctx' is
NULL. As a result, it dereferences the NULL 'ctx' pointer. Avoid the
NULL dereference by returning -ENOMEM if 'ctx' is NULL.
Link: https://lore.kernel.org/20260529000104.7006-2-sj@kernel.org
Link: https://lore.kernel.org/20260419014800.877-1-sj@kernel.org [1]
Fixes: 3f7a914ab9 ("mm/damon/reclaim: use damon_initialized()")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: <stable@vger.kernel.org> # 6.18.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
zram_read_page() picks the sync or async backing device read path based on
whether the parent bio is NULL. zram_bvec_write_partial() passes its
parent bio down, so for ZRAM_WB slots the read is dispatched
asynchronously and zram_read_page() returns 0 while the bio is still in
flight. The caller then runs memcpy_from_bvec(), zram_write_page() and
__free_page() on the buffer, leaving the async read to write into a freed
page.
zram_bvec_read_partial() was switched to NULL in commit 4e3c87b942
("zram: fix synchronous reads") for the same reason; the write_partial
counterpart was missed.
Link: https://lore.kernel.org/20260528-zram-v3-1-cab86eef8764@gmail.com
Fixes: 8e654f8fbf ("zram: read page from backing device")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Cunlong Li <shenxiaogll@gmail.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
I will switch to use @linux.dev mailbox, update all entries in
MAINTAINERS. And map the address in .mailmap.
Link: https://lore.kernel.org/20260528131454.1996752-1-baoquan.he@linux.dev
Signed-off-by: Baoquan He <baoquan.he@linux.dev>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
After commit 9b93f7e327 ("tools/getdelays: use the static UAPI headers
from tools/include/uapi"), the Makefile was changed to use
-I../include/uapi/ instead of -I../../usr/include to ensure tools always
use the up-to-date UAPI headers.
However, only linux/taskstats.h was added to tools/include/uapi/ in commit
e5bbb35a07 ("tools headers UAPI: sync linux/taskstats.h"), but
linux/acct.h was missing.
This causes procacct.c to fail to compile with:
procacct.c:234:37: error: 'AGROUP' undeclared (first use in this function)
gcc -I../include/uapi/ getdelays.c -o getdelays
gcc -I../include/uapi/ procacct.c -o procacct
procacct.c: In function `print_procacct':
procacct.c:234:37: error: `AGROUP' undeclared (first use in this function)
did you mean `NOGROUP'?
234 | , t->version >= 12 ? (t->ac_flag & AGROUP ? 'P' : 'T') : '?'
| ^~~~~~
| NOGROUP
procacct.c:234:37: note: each undeclared ident
because procacct.c uses the AGROUP macro defined in linux/acct.h.
Add the missing linux/acct.h to complete the static UAPI header set.
Link: https://lore.kernel.org/20260527213558929EhiHHy9EDTMjmg3uuDOMi@zte.com.cn
Fixes: 9b93f7e327 ("tools/getdelays: use the static UAPI headers from tools/include/uapi")
Signed-off-by: Wang Yaxin <wang.yaxin@zte.com.cn>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Cc: Fan Yu <fan.yu9@zte.com.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Yang Yang <yang.yang29@zte.com.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
cma_activate_area() can fail after a CMA area has already been added to
cma_areas[]. In that case the area is left in the global array, but it
does not reach the point where CMA_ACTIVATED is set.
cma_sysfs_init() currently walks all cma_area_count entries and creates
sysfs files for every area, including ones that failed activation. These
areas are not usable CMA areas and should not be exposed to userspace as
valid CMA regions.
If such an inactive area is exposed, userspace sees a CMA directory whose
read-only accounting files report zeros. total_pages and available_pages
report zero because the failed activation path clears cma->count and
cma->available_count, while the allocation and release counters also stay
at zero because the area cannot service CMA allocations. This makes the
failed area look like a valid but empty CMA region and can mislead tests,
monitoring, and diagnostics.
Skip CMA areas that did not reach CMA_ACTIVATED when creating the sysfs
objects. Since inactive entries can now be skipped, make the error unwind
tolerate entries that never had cma_kobj initialized.
Link: https://lore.kernel.org/20260524140420.61864-1-kaitao.cheng@linux.dev
Link: https://lore.kernel.org/20260522131434.78532-1-kaitao.cheng@linux.dev
Fixes: 43ca106fa8 ("mm: cma: support sysfs")
Signed-off-by: Kaitao Cheng <chengkaitao@kylinos.cn>
Reported-by: David Hildenbrand (Arm) <david@kernel.org>
Suggested-by: David Hildenbrand (Arm) <david@kernel.org>
Suggested-by: Muchun Song <songmuchun@bytedance.com>
Reported-by: Muchun Song <songmuchun@bytedance.com>
Closes: https://lore.kernel.org/linux-mm/55481a8b-dcfc-4bef-ba59-aa0b43dca88b@kernel.org/
Acked-by: Muchun Song <muchun.song@linux.dev>
Cc: David Hildenbrand <david@kernel.org>
Cc: Dmitry Osipenko <digetx@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam R. Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
shm_destroy_orphaned() walks the shm idr under shm_ids(ns).rwsem, but that
does not serialize all fields tested by shm_may_destroy(). In particular,
shm_nattch is updated while holding shm_perm.lock, and attach paths can do
that without holding the rwsem.
Do not decide that an orphaned segment is unused before taking the object
lock. Move the shm_may_destroy() check under shm_perm.lock, matching the
other destroy paths, and unlock the segment when it no longer qualifies
for removal.
Link: https://lore.kernel.org/9d97cc1031de2d0bace0edf3a668818aa2f4eca6.1777410234.git.zylzyl2333@gmail.com
Fixes: 4c677e2eef ("shm: optimize locking and ipc_namespace getting")
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Yilin Zhu <zylzyl2333@gmail.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Jeongjun Park <aha310510@gmail.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Liam Howlett <liam@infradead.org>
Cc: Lorenzo Stoakes <ljs@kernel.org>
Cc: Serge Hallyn <sergeh@kernel.org>
Cc: Vasiliy Kulikov <segoon@openwall.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The main function of the redirect interrupt controller is to manage
the redirected-interrupt table, which consists of many redirected entries.
When MSI interrupts are requested, the driver creates a corresponding
redirected entry that describes the target CPU/vector number and the
operating mode of the interrupt. The redirected interrupt module has an
independent cache, and during the interrupt routing process, it will
prioritize the redirected entries that hit the cache. The irqchip driver
can invalidate certain entry caches via a command queue.
Co-developed-by: Liupu Wang <wangliupu@loongson.cn>
Signed-off-by: Liupu Wang <wangliupu@loongson.cn>
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20260513012839.2856463-5-zhangtianyang@loongson.cn
Interrupt redirection support requires a new redirect domain, which will
appear as a child domain of avecintc domain. For each interrupt source,
avecintc domain only provides the CPU/interrupt vectors, while redirect
domain provides other operations to synchronize the interrupt affinity
information among multiple cores.
When modifying the affinity of an interrupt associated with the redirect
domain, if the avecintc domain detects that the actual interrupt affinity
hasn't been changed, then the redirect domain doesn't need to perform any
operations.
To achieve the above purpose, in avecintc_set_affinity() when the current
affinity remains valid, then return value is set to IRQ_SET_MASK_OK_DONE.
This doesn't introduce any compatibility issues, even if the new return
value causing msi_domain_set_affinity() to no longer perform the call to
irq_chip_write_msi_msg():
1) When both avecintc and redirect exist in the system, the msg_address
and msg_data no longer change after the allocation phase, so it does
not actually require updating the MSI message info.
2) When only avecintc exists in the system, the irq_domain_activate_irq()
interface will be responsible for the initial configuration of the MSI
message info, which is unconditional. After that, if unnecessary,
there is no modification to the MSI message info.
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20260513012839.2856463-4-zhangtianyang@loongson.cn
Interrupt redirection support requires a new interrupt chip, which needs
to share data structures, constants and functions with the AVECINTC code.
So move them to the header file and make the required functions public.
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20260513012839.2856463-3-zhangtianyang@loongson.cn
Introduce a new advanced extended interrupt model with redirect interrupt
controllers. When the redirect interrupt controller is enabled, the routing
target of MSI interrupts is no longer a specific CPU and vector number, but
a specific redirect entry. The actual CPU and vector number used are
described by the redirect entry.
Signed-off-by: Tianyang Zhang <zhangtianyang@loongson.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Acked-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20260513012839.2856463-2-zhangtianyang@loongson.cn
Use the simpler min() macro since both values are unsigned and
compatible.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Signed-off-by: Will Deacon <will@kernel.org>
syzbot triggered the following splat in remove_waiter() via
FUTEX_CMP_REQUEUE_PI:
KASAN: null-ptr-deref in range [0x0000000000000a88-0x0000000000000a8f]
class_raw_spinlock_constructor
remove_waiter+0x159/0x1200 kernel/locking/rtmutex.c:1561
rt_mutex_start_proxy_lock+0x103/0x120
futex_requeue+0x10e4/0x20d0
__x64_sys_futex+0x34f/0x4d0
task_blocks_on_rt_mutex() does not arm the waiter upon deadlock detection,
leaving waiter->task nil, where 3bfdc63936 ("rtmutex: Use waiter::task instead
of current in remove_waiter()") made this fatal.
Furthermore, rt_mutex_start_proxy_lock() should not be calling into remove_waiter()
upon a successfully grabbing the rtmutex. 1a1fb985f2 ("futex: Handle early deadlock
return correctly"), moved the remove_waiter() out of __rt_mutex_start_proxy_lock()
(where 'ret' was only ever 0 or < 0) into the wrapper. Tighten this check to
account for try_to_take_rt_mutex().
Fixes: 3bfdc63936 ("rtmutex: Use waiter::task instead of current in remove_waiter()")
Reported-by: syzbot+78147abe6c524f183ee9@syzkaller.appspotmail.com
Signed-off-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Cc: stable@vger.kernel.org
Closes: https://lore.kernel.org/all/69f114ac.050a0220.ac8b.0003.GAE@google.com/
Link: https://patch.msgid.link/20260507112913.1019537-1-dave@stgolabs.net
The new DVM node events added in CMN-700 also apply to CMN S3; fix
the model encoding so that we can expose the aliases and handle
occupancy filtering on newer CMNs too.
Cc: stable@vger.kernel.org
Fixes: 0dc2f4963f ("perf/arm-cmn: Support CMN S3")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
In smu_v14_0_0_set_soft_freq_limited_range(), the gfxclk floor is
programmed via SetHardMinGfxClk together with SetSoftMaxGfxClk. Under
power_dpm_force_performance_level=high this pins HardMin to peak gfxclk.
In PMFW arbitration HardMin has higher priority than SoftMax, so the
firmware thermal/PPT throttler cannot clamp gfxclk via SoftMax once
HardMin is set to peak. Replace SetHardMinGfxClk with SetSoftMinGfxclk
so the driver still requests peak performance but the firmware
throttler retains the ability to clamp gfxclk under thermal/PPT
pressure. SoftMax handling is unchanged and no other clock domains
are affected.
Signed-off-by: Priya Hosur <Priya.Hosur@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3ea273267f)
Cc: stable@vger.kernel.org
When mapping VRAM pages into the GART page table,
amdgpu_gart_map_vram_range() assumes that the system page size is the
same as the GPU page size.
On systems with non-4K page sizes, multiple GPU pages can exist within
a single CPU page. As a result, the mappings are created incorrectly
because fewer page table entries are programmed than required.
Fix this by programming the mappings correctly for non-4K page size
systems.
Fixes: 237d623ae6 ("drm/amdgpu/gart: Add helper to bind VRAM pages (v2)")
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a8f0bc2238)
Cc: stable@vger.kernel.org
In case when queue_create fails and mqd has already been
allocated and hence wptr_obj is not cleaned up.
So moving that cleanup part to mqd_destroy so it takes
care of all the cases of clean up and during tear down of
the queue.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 43355f62cd)
Use find_next_zero_bit() to locate the next free seq slot bit
instead of the current walk, for more efficient bitmap scanning.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ff905a9b62)
Mesa userqueues free does not wait for the free to complete and go ahead
in unmapping the vital bos while kernel is still in queue free and
corresponding cleanup.
So ideally we don't need the logging for that and hence remove the warn
message as this is expected behaviour and functionally, we are making
sure to wait for the required fences before unmap.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 758a868043)
The v11 MQD manager incorrectly assigned the CP-compute variants of
checkpoint_mqd/restore_mqd for KFD_MQD_TYPE_SDMA queues. These functions
use sizeof(struct v11_compute_mqd) (2048 bytes) instead of sizeof(struct
v11_sdma_mqd) (512 bytes), causing a 1536-byte overflow.
During CRIU checkpoint of an SDMA queue on Navi3x:
- checkpoint_mqd() reads 2048 bytes from a 512-byte SDMA MQD buffer,
leaking 1536 bytes of adjacent GTT memory to userspace
During CRIU restore:
- restore_mqd() writes 2048 bytes into a 512-byte SDMA MQD buffer,
corrupting 1536 bytes of adjacent GTT memory (often the ring buffer
or neighboring MQDs)
This is a copy-paste regression unique to v11. All other ASIC backends
(cik, vi, v9, v10, v12) correctly use the SDMA-specific variants.
Add checkpoint_mqd_sdma() and restore_mqd_sdma() functions that properly
handle the smaller v11_sdma_mqd structure, matching the pattern used in
other MQD managers.
Fixes: cc009e613d ("drm/amdkfd: Add KFD support for soc21 v3")
Assisted-by: Claude:Sonnet 4-5
Signed-off-by: Andrew Martin <andrew.martin@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6fa41db7ff)
Cc: stable@vger.kernel.org
When usr_queue_id_array is NULL and num_queues is non-zero,
get_queue_ids() returns NULL. The callers check only IS_ERR() on the
return value; since IS_ERR(NULL) == false the check passes, and
suspend_queues() calls q_array_invalidate() which immediately
dereferences NULL while iterating num_queues times.
Userspace can trigger this via kfd_ioctl_set_debug_trap() by supplying
num_queues > 0 with a zero queue_array_ptr, causing a kernel panic.
A NULL usr_queue_id_array with num_queues == 0 is a legitimate no-op
(q_array_invalidate never executes, and resume_queues already guards
all queue_ids dereferences behind a NULL check). Return ERR_PTR(-EINVAL)
only when num_queues is non-zero and the pointer is absent; both callers
already propagate IS_ERR() returns correctly to userspace.
Fixes: a70a93fa56 ("drm/amdkfd: add debug suspend and resume process queues operation")
Signed-off-by: Muhammad Bilal <meatuni001@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit f165a82cdf)
Cc: stable@vger.kernel.org
Problem:
While developing the amd_close_race IGT test (which intentionally triggers
execute permission faults by removing VM_PAGE_EXECUTABLE from GPU page table
entries), we discovered that on Navi10 (GFX 10.1.x) these faults produce
zero diagnostic output. The GPU simply hangs silently for ~10s until the
scheduler timeout fires. There is no way to distinguish an execute
permission fault from any other type of GPU hang.
Root cause:
GFX 10.1.x defaults to noretry=0, which sets
RETRY_PERMISSION_OR_INVALID_PAGE_FAULT=1 in the GFXHUB UTCL2 registers
(gfxhub_v2_0.c line 313). With this bit set, permission faults (valid PTE,
wrong R/W/X bits) are handled entirely within the UTCL1/UTCL2 hardware
loop: UTCL2 returns an XNACK to UTCL1, and UTCL1 re-requests the
translation indefinitely, expecting software to eventually fix the
permission bits (as happens in SVM/HMM recovery). No interrupt of any kind
reaches the IH ring.
This is different from invalid-page faults (V=0) which DO generate a retry
fault interrupt that the driver can escalate to a no-retry fault. Permission
faults with valid PTEs loop silently forever in hardware.
GFX 10.3+ already defaults to noretry=1, which makes permission faults
generate immediate L2 protection fault interrupts. GFX 10.1.x was
inadvertently left out of this default.
Fix:
Change the noretry=1 threshold from IP_VERSION(10, 3, 0) to
IP_VERSION(10, 1, 0) in amdgpu_gmc_noretry_set(). This is a one-line
change that aligns GFX 10.1.x behavior with GFX 10.3+ and all newer
generations.
With noretry=1, the existing non-retry fault handler
(gmc_v10_0_process_interrupt) already decodes and prints the full
GCVM_L2_PROTECTION_FAULT_STATUS register including PERMISSION_FAULTS,
faulting address, VMID, PASID, and process name. No additional logging
code is needed — the fix is purely routing permission faults to the
existing, fully-capable non-retry interrupt handler.
v2: Dropped GFX10-specific logging from gmc_v10_0.c and
kfd_int_process_v10.c (Felix Kuehling). v1 added logging in the retry
fault handler, but with noretry=1 permission faults take the non-retry
path — the v1 retry handler code was dead and would never execute.
Tested on Navi10 (GFX 10.1.10):
- Execute permission faults now produce immediate, clear output:
[gfxhub] page fault (src_id:0 ring:64 vmid:4 pasid:592)
Process amd_close_race pid 13380 thread amd_close_race pid 13384
in page at address 0x40001000 from client 0x1b (UTCL2)
GCVM_L2_PROTECTION_FAULT_STATUS:0x00700881
PERMISSION_FAULTS: 0x8
- No regressions with properly-mapped GPU workloads
Cc: Christian Koenig <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit eb21edd24c)
Cc: stable@vger.kernel.org
When the fault stop mode isn't AMDGPU_VM_FAULT_STOP_ALWAYS,
these bits should be programmed to 0.
Program CRASH_ON_NO_RETRY_FAULT and CRASH_ON_RETRY_FAULT
always, to make sure to clear the bits when we don't want
to crash.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d0cd99e730)
Wait for all submissions when userptrs need to be invalidated by the MMU
notifier, not just the one the userptr was involved into.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Tested-by: Vitaly Prosyak <vitaly.prosyak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 91250893cb)
Cc: stable@vger.kernel.org
For PTE creation use asic specific physical page base address mask
v2: Change variable name from pa_mask to pte_addr_mask
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 2ea9898859)
SMU messages may use fewer arguments than the available argument registers,
the previous code only wrote used registers and left the rest unchanged,
so stale values from a prior message could persist.
Write all argument registers for each message and zero the unused tail
to keep command arguments deterministic and avoid unintended carry-over.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e03b635f61)
EnergyAccumulator is unsupported on SMU 14.0.2, mark it invalid.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 646b05043e)
Cc: stable@vger.kernel.org
smu_v13_0_0_get_power_limit() and smu_v13_0_7_get_power_limit() mix
runtime power_limit with PP table limits when reporting default/min/max.
When current power limit query succeeds, default_power_limit was set to the
runtime value instead of the PP table default, and min/max could be derived
from inconsistent bases (MsgLimits/runtime), leading to incorrect cap info.
Use SocketPowerLimitAc/Dc as the PP default base (pp_limit), keep
current_power_limit as runtime value, and derive min/max from pp_limit with
OD percentages.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5227
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1eaf26db95)
Cc: stable@vger.kernel.org
On SMU v13.0.10, sending PrepareMp1ForUnload with the default
parameter may leave the device in an inaccessible state. This can
affect runtime power management and partial PnP flows.
e.g: kexec, driver unload, boco/d3cold.
Pass the required workaround parameter 0x55, when preparing MP1 for
unload on SMU v13.0.10, keep the existing behavior for other SMU
versions.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5133
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4e8ee1afee)
Cc: stable@vger.kernel.org
It seems that Pitcairn has the same issues as Tahiti
with regards to the TLB size. This commit fixes a
VCE1 FW validation timeout on suspend/resume on Pitcairn.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5336
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 629279e2e7)
If the driver only preempts queues, there can still be inflight waves,
pending dispatch state, or resume/redispatch possibility tied to the
same queue. Then the VM/TTM side may proceed to move/unmap queue related
BOs during evicting userq objects while shader TCP clients still need to
access them.
So for eviction, unmap is safer because it makes the queue nonrunnable
before memory backing is invalidated. Meanwhile, for a idle queue it's
more sutiable for unmapping it rather preempt and unmapping also can
save more processing time than preempt.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit d87c9d8672)
Set the flag in the ring structure.
Fixes: 80d4d3a45b ("drm/amdgpu/sdma7.1: add support for disable_kq")
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e0a3aa8a67)
wait_on_destroy_queue() drops locks to wait for queue resume, allowing
a concurrent destroy to free the queue. Use is_being_destroyed flag to
serialize destruction.
Reviewed-by: Amir Shetaia <Amir.Shetaia@amd.com>
Signed-off-by: Alysa Liu <Alysa.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit ac081deaf1)
[Why & How]
All record-chain walk loops in bios_parser.c and bios_parser2.c use
for(;;) and only terminate on a 0xFF record_type sentinel or zero
record_size. A malformed VBIOS image missing the terminator record
causes unbounded iteration at probe time, potentially hundreds of
thousands of iterations with record_size=1. In the final iterations
near the BIOS image boundary, struct casts beyond the 2-byte header
validated by GET_IMAGE can also read out of bounds.
Cap all 14 record-chain walk loops to BIOS_MAX_NUM_RECORD (256)
iterations. The atombios.h defines up to 22 distinct record types
and atomfirmware.h has 13. Assuming an average of less than 10
records per type (which is reasonable since most are connector-
based) 256 is a generous upper bound.
Fixes: 4562236b3b ("drm/amd/dc: Add dc display driver (v2)")
Assisted-by: Copilot:claude-opus-4.6 Mythos
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 95700a3d66)
Cc: stable@vger.kernel.org
[Why & How]
During HDCP 2.x repeater authentication over HDMI, the driver reads the
sink's RxStatus register and extracts a 10-bit message size field (max
value 1023). This value is used as the read length for the ReceiverID
list without being clamped to the size of the destination buffer
rx_id_list[177]. A malicious HDMI repeater could advertise a message
size larger than the buffer, causing an out-of-bounds write during the
I2C read.
Clamp the read length in mod_hdcp_read_rx_id_list() to the size of the
rx_id_list buffer, matching the approach already used in the DP branch.
Fixes: eff682f83c ("drm/amd/display: Add DDC handles for HDCP2.2")
Assisted-by: Copilot:claude-opus-4.6
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 229212219e)
Cc: stable@vger.kernel.org
[Why & How]
gpio_bitshift is a uint8_t read directly from the VBIOS GPIO pin table.
If the value is >= 32, the expression "1 << gpio_bitshift" triggers
undefined behaviour in C (shift count exceeds type width). On x86 the
shift is silently masked to 5 bits, producing an incorrect GPIO mask
that may cause wrong MMIO register bits to be toggled.
Validate gpio_bitshift before use and return BP_RESULT_BADBIOSTABLE for
out-of-range values.
Fixes: ae79c310b1 ("drm/amd/display: Add DCE12 bios parser support")
Assisted-by: Copilot:claude-opus-4.6
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit eadf438ab8)
Cc: stable@vger.kernel.org
[Why & How]
dal_vector_reserve() computes the allocation size as
"capacity * vector->struct_size" using uint32_t arithmetic, which can
silently wrap to a small value on overflow. This would cause krealloc to
return a smaller buffer than expected, leading to heap overflows on
subsequent vector appends.
Replace krealloc() with krealloc_array() which performs an internal
overflow check and returns NULL on wrap, preventing the issue.
Fixes: 2004f45ef8 ("drm/amd/display: Use kernel alloc/free")
Assisted-by: Copilot:claude-opus-4.6
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 3766856864)
Cc: stable@vger.kernel.org
[Why & How]
dp_sdp_message_debugfs_write() dereferences connector->base.state->crtc
without checking for NULL. A connector can be connected but not bound to
any CRTC (e.g. after hot-plug before the next atomic commit), causing a
kernel crash when writing to the sdp_message debugfs node.
The function also ignores the user-provided size argument and always
passes 36 bytes to copy_from_user(), reading past the user buffer when
size < 36.
Fix both issues by:
- Returning -ENODEV when connector->base.state or state->crtc is NULL
- Clamping write_size to min(size, sizeof(data))
Fixes: c7ba3653e9 ("drm/amd/display: Generic SDP message access in amdgpu")
Assisted-by: Copilot:claude-opus-4.6
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 6ab4c36a52)
Cc: stable@vger.kernel.org
[Why & How]
The VBIOS integrated info tables (v1_11 and v2_1) contain HdmiRegNum and
Hdmi6GRegNum fields that are used as loop bounds when copying retimer I2C
register settings into fixed-size arrays (dp*_ext_hdmi_reg_settings[9]
and dp*_ext_hdmi_6g_reg_settings[3]). These u8 fields are not validated
before use, so a malformed VBIOS can specify values up to 255, causing an
out-of-bounds heap write during driver probe.
Clamp each register count to the destination array size using min_t()
before the copy loops, in both get_integrated_info_v11() and
get_integrated_info_v2_1().
Assisted-by: GitHub Copilot:claude-opus-4.6
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5a7f0ef901)
Cc: stable@vger.kernel.org
[Why & How]
The aux_rd_interval array in struct dc_lttpr_caps is declared with
MAX_REPEATER_CNT - 1 (7) elements, indexed 0..6. However, the offset
parameter passed to dp_get_eq_aux_rd_interval() can be as large as
MAX_REPEATER_CNT (8) when a sink reports 8 LTTPR repeaters via DPCD.
This leads to an out-of-bounds read of aux_rd_interval[7] when offset
is 8.
Fix this by growing aux_rd_interval to MAX_REPEATER_CNT elements to
accommodate the full range of valid repeater counts defined by the DP
spec.
Assisted-by: GitHub Copilot:Claude claude-4-opus
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a55a458a8d)
Cc: stable@vger.kernel.org
DCE-based hardware does not have the CSC matrices for BT.2020, which
causes the driver to fallback to the GPU built-in matrices. This does
not appear to cause any issues for RGB sinks, but causes major color
artifacts for YCbCr ones (e.g. black becomes green).
This commit adds the missing CSC matrices (taken from DC common) to DCE
CSC tables, resolving the issue.
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/3358
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5333
Assisted-by: oh-my-pi:GPT-5.5
Signed-off-by: Leorize <leorize+oss@disroot.org>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 51e6668ab4)
Cc: stable@vger.kernel.org
The cpu_id attribute supplied by user space through
UVERBS_ATTR_ALLOC_DMAH_CPU_ID is passed directly to cpumask_test_cpu()
without first verifying that the value is within the valid CPU range.
Passing such untrusted data to cpumask_test_cpu() may lead to an
out-of-bounds read of the underlying cpumask bitmap: the helper expands
to a test_bit() that indexes the bitmap by cpu_id / BITS_PER_LONG with
no bound check.
In addition, on kernels built with CONFIG_DEBUG_PER_CPU_MAPS it trips
the WARN_ON_ONCE() in cpumask_check(); combined with panic_on_warn this
turns a bad user input into a machine reboot.
Reject any cpu_id that is not smaller than nr_cpu_ids with -EINVAL
before it is used.
Reported by Smatch.
Fixes: d83edab562 ("RDMA/core: Introduce a DMAH object and its alloc/free APIs")
Link: https://patch.msgid.link/r/20260525142136.28165-1-yishaih@nvidia.com
Cc: stable@vger.kernel.org
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/ag68qoAW3P04J7pT@stanley.mountain/
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The size limits break some of the CI tests. So drop them for now. Keep
the other overflow tests from commit 5ab62dd368 ("drm: prevent integer
overflows in dumb buffer creation helpers") in place.
There is still a pre-existing overflow check for 32-bit type limits in
drm_mode_create_dumb() that will catch the really absurd size requests.
Drivers that still do not use drm_mode_size_dumb() should be updated. The
helper calculates dumb-buffer geometry with overflow checks.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 5ab62dd368 ("drm: prevent integer overflows in dumb buffer creation helpers")
Reported-by: Jani Nikula <jani.nikula@linux.intel.com>
Closes: https://lore.kernel.org/dri-devel/ddf0233e50044059c85279f928661563ef6a55bf@intel.com/
Cc: Rajat Gupta <rajat.gupta@oss.qualcomm.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patch.msgid.link/20260602112842.252279-1-tzimmermann@suse.de
The IRQ_ENABLE_BANK register is a bank of 32-bit words where each bit
represents one PDC pin. The bank index and bit position within the bank
are encoded in the flat pin number as bits [31:5] and [4:0] respectively.
Replace the open-coded division and modulo with FIELD_GET() and GENMASK()
to make the bit extraction self-documenting and consistent with the
FIELD_PREP() style already used in the PDC_VERSION() macro.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260527095426.2324504-5-mukesh.ojha@oss.qualcomm.com
The PDC hardware version register encodes major, minor and step fields
in byte-sized fields at bits [23:16], [15:8] and [7:0] respectively.
The existing PDC_VERSION_3_2 constant was a bare magic number (0x30200)
with no indication of this encoding.
Add GENMASK-based field definitions for each sub-field and a
PDC_VERSION(maj, min, step) constructor macro using FIELD_PREP, making
the encoding self-documenting. Replace the magic constant with
PDC_VERSION(3, 2, 0).
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260527095426.2324504-4-mukesh.ojha@oss.qualcomm.com
The QCOM_PDC_SIZE constant (0x30000) was introduced to work around old
sm8150 DTs that described a too-small PDC register region, causing the
driver to silently expand the ioremap to cover three DRV regions. Now
that the preceding DT fixes have corrected all platforms to describe only
the APSS DRV region (0x10000), the oversized clamp is no longer needed.
Replace QCOM_PDC_SIZE with PDC_DRV_SIZE (0x10000) in the clamp so the
minimum mapped size matches a single DRV region. The clamp and warning
are intentionally kept to preserve backward compatibility with any old
DTs that may still describe a smaller region.
While at it, rename PDC_DRV_OFFSET to PDC_DRV_SIZE since the constant
represents the size of a DRV region and is used as both the ioremap
minimum size and the offset to the previous DRV region.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://patch.msgid.link/20260527095426.2324504-3-mukesh.ojha@oss.qualcomm.com
The __pdc_enable_intr() function contains a version branch that selects
between two distinct enable mechanisms: a bank-based IRQ_ENABLE_BANK
register for HW < 3.2, and a per-pin enable bit in IRQ_i_CFG for
HW >= 3.2. These two paths share no code and serve different hardware.
Split them into two focused static functions: pdc_enable_intr_bank()
for HW < 3.2 and pdc_enable_intr_cfg() for HW >= 3.2. No functional
change.
Signed-off-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260527095426.2324504-2-mukesh.ojha@oss.qualcomm.com
