A TDX module update is a multi-step process, and any step can fail.
The current update flow continues to later steps after an error.
Continuing after a failure can cause the TDX module to enter an
unrecoverable state.
But certain failures during the initial module shutdown step should
simply return an error to userspace, so the update can be retried
cleanly.
To preserve that recoverability, one option would be to abort the
update only for those failures, since they occur before any TDX module
state is changed. But special-casing specific failures in specific
steps would complicate the do-while() update loop for no benefit.
Simply abort update on any failure, at any step.
Track failures for each step, stop the update loop once a failure is
observed, and do not advance the state machine to the next step.
[ dhansen: style nits ]
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Xu Yilun <yilun.xu@linux.intel.com>
Reviewed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Link: https://lore.kernel.org/linux-coco/aQFmOZCdw64z14cJ@google.com/ # [1]
Link: https://patch.msgid.link/20260520133909.409394-16-chao.gao@intel.com
tl;dr: Use stop_machine() and a state machine based on the
"MULTI_STOP" pattern to implement core TDX module update logic.
Long version:
TDX module updates require careful synchronization with other TDX
operations. The requirements are (#1/#2 reflect current behavior that
must be preserved):
1. SEAMCALLs need to be callable from both process and IRQ contexts.
2. SEAMCALLs need to be able to run concurrently across CPUs
3. During updates, only update-related SEAMCALLs are permitted; all
other SEAMCALLs shouldn't be called.
4. During updates, all online CPUs must participate in the update work.
No single lock primitive satisfies all requirements. For instance,
rwlock_t handles #1/#2 but fails #4: CPUs spinning with IRQs disabled
cannot be directed to perform update work.
Use stop_machine() as it is the only well-understood mechanism that can
meet all requirements.
And TDX module updates consist of several steps (See Intel Trust Domain
Extensions (Intel TDX) Module Base Architecture Specification, Chapter
"TD-Preserving TDX module Update"). Ordering requirements between steps
mandate lockstep synchronization across all CPUs.
multi_cpu_stop() provides a good example of executing a multi-step task
in lockstep across CPUs, but it does not synchronize the individual
steps inside the callback itself.
Implement a similar state machine as the skeleton for TDX module
updates. Each state represents one step in the update flow, and the
state advances only after all CPUs acknowledge completion of the current
step. This acknowledgment mechanism provides the required lockstep
execution.
The update flow is intentionally simpler than multi_cpu_stop() in two ways:
a) use a spinlock to protect the control data instead of atomic_t and
explicit memory barriers.
b) omit touch_nmi_watchdog() and rcu_momentary_eqs(), which exist
there for debugging and are not strictly needed for this update flow
Potential alternative to stop_machine()
=======================================
An alternative approach is to lock all KVM entry points and kick all
vCPUs. Here, KVM entry points refer to KVM VM/vCPU ioctl entry points,
implemented in KVM common code (virt/kvm). Adding a locking mechanism
there would affect all architectures KVM supports. And to lock only TDX
vCPUs, new logic would be needed to identify TDX vCPUs, which the KVM
common code currently lacks. This would add significant complexity and
maintenance overhead to KVM for this TDX-specific use case, so don't take
this approach.
[ dhansen: normal changelog/style munging ]
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Xu Yilun <yilun.xu@linux.intel.com>
Reviewed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Link: https://patch.msgid.link/20260520133909.409394-15-chao.gao@intel.com
There are two important ABIs here:
'struct tdx_image' - The on-disk and in-memory format for a TDX
module update image.
'struct seamldr_params' - The in-memory ABI passed to the TDX module
loader. Points to a single 'struct tdx_image'
broken up into 4k pages.
Userspace supplies the update image in 'struct tdx_image' format. The
image consists of a header followed by a sigstruct and the module
binary. P-SEAMLDR, however, consumes 'struct seamldr_params' rather
than the image directly.
Parse the 'struct tdx_image' provided by userspace and populate a
matching 'struct seamldr_params'.
The 'tdx_image' ABI is versioned. Two public versions exist today:
0x100 and 0x200. This kernel only accepts 0x200. The older 0x100
format is being deprecated and is intentionally not supported here.
Future versions of the module might be able to use the same ABIs
(user/kernel and kernel/SEAMLDR) but they will not be able to use this
kernel code.
Reject module images without that specific version. This ensures that
the kernel is able to understand the passed-in format.
Validate the 'struct tdx_image' header before using it, because the
header is consumed solely by the kernel to locate the sigstruct and
module within the image. Do not validate the payload itself. The
sigstruct and module pages are passed through to P-SEAMLDR, which
validates them as part of the update.
sigstruct_pages_pa_list currently has only one entry, but it will grow
to four pages in the future. Keep it as an array for symmetry with
module_pages_pa_list and for extensibility.
[ dhansen: normal changelog clarification/munging ]
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20260520133909.409394-14-chao.gao@intel.com
tl;dr: Select fw_upload for doing TDX module updates. The process of
selecting among available update images is complicated and nuanced. Punt
the selection process out to userspace. One existing userspace
implementation today is the script in the Intel TDX Module Binaries
repository[1].
Long Version:
The kernel supports two primary firmware update mechanisms:
1. request_firmware() - used by microcode, SEV firmware, hundreds of
other drivers
2. 'struct fw_upload' - used by CXL, FPGA updates, dozens of others
The key difference between is that request_firmware() loads a named file
from the filesystem where the filename is kernel-controlled, while
fw_upload accepts firmware data directly from userspace.
TDX module firmware update selection policy is too complex for the kernel.
Leave it to userspace and use fw_upload.
Add a skeleton fw_upload implementation to be fleshed out in subsequent
patches.
Refactor the sysfs visiblity attribute function so it can be used as a
more generic flag for the presence of viable runtime update support.
Why fw_upload instead of request_firmware()?
============================================
Selecting a TDX module update image is not a simple "load the latest"
decision. Userspace needs to choose an image that is compatible with both
the platform and the currently running module.
Some constraints are hard requirements:
a. Module version series are platform-specific. For example, the 1.5.x
series runs on Sapphire Rapids but not Granite Rapids, which needs
2.0.x.
b. Updates are also constrained by version distance. A 1.5.6 module
might permit updates to 1.5.7 but not to 1.5.50.
There may also be userspace policy choices:
c. Decide the update direction: upgrade or downgrade
d. Choose whether to optimize for fewer updates or smaller version
steps, for example, 1.2.3=>1.2.5 versus 1.2.3=>1.2.4=>1.2.5.
Given that complexity, leave module selection to userspace and use
fw_upload.
1. https://github.com/intel/confidential-computing.tdx.tdx-module.binaries/blob/main/version_select_and_load.py
[ dhansen: add version script link, add more explanation of code moves,
fix some minor whitespace issues ]
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Link: https://lore.kernel.org/kvm/01fc8946-eb84-46fa-9458-f345dd3f6033@intel.com/
Link: https://patch.msgid.link/20260520133909.409394-13-chao.gao@intel.com
TDX-capable CPUs clobber the current VMCS on P-SEAMLDR calls. Clearing
the current VMCS behind KVM's back breaks KVM.
Future CPUs will fix this by preserving the current VMCS across
P-SEAMLDR calls. A future specification update will describe the
VMCS-clearing behavior as an erratum and to state that it does not
occur when IA32_VMX_BASIC[60] is set.
Add a CPU bug bit and refuse to expose P-SEAMLDR information on
affected CPUs.
Use a CPU bug bit to stay consistent with X86_BUG_TDX_PW_MCE. As a
bonus, the bug bit is visible to userspace, which allows userspace to
determine why these sysfs files are not exposed, and it can also be
checked by other kernel components in the future if needed.
== Alternatives ==
Two workarounds were considered but both were rejected:
1. Save/restore the current VMCS around P-SEAMLDR calls. This produces ugly
assembly code [1] and doesn't play well with #MCE or #NMI if they
need to use the current VMCS.
2. Move KVM's VMCS tracking logic to the TDX core code, which would break
the boundary between KVM and the TDX core code [2].
[ dhansen: comment and changelog munging. Add seamldr_call() bug check. ]
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/kvm/fedb3192-e68c-423c-93b2-a4dc2f964148@intel.com/ # [1]
Link: https://lore.kernel.org/kvm/aYIXFmT-676oN6j0@google.com/ # [2]
Link: https://patch.msgid.link/20260520133909.409394-12-chao.gao@intel.com
TDX module updates require userspace to select the appropriate module
to load. Expose necessary information to facilitate this decision. Two
values are needed:
- P-SEAMLDR version: for compatibility checks between TDX module and
P-SEAMLDR
- num_remaining_updates: indicates how many updates can be performed
Expose them as tdx-host device attributes visible only when updates
are supported.
Note that the underlying P-SEAMLDR attributes are available regardless
of update support; this only restricts their visibility to userspace.
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20260520133909.409394-11-chao.gao@intel.com
P-SEAMLDR reports its state via SEAMLDR.INFO, including its version and
the number of remaining runtime updates.
This information is useful for userspace. For example, userspace can
use the P-SEAMLDR version to determine whether a candidate TDX module
is compatible with the running loader, and can use the remaining
update count to determine whether another runtime update is still
possible.
Add a helper to retrieve P-SEAMLDR information in preparation for
exposing P-SEAMLDR version and other necessary information to userspace.
Export the new kAPI for use by the "tdx_host" device.
Note that there are two distinct P-SEAMLDR APIs with similar names:
"SEAMLDR.INFO" is metadata about the loader. It's metadata for the
update process.
"SEAMLDR.SEAMINFO" is metadata about SEAM mode. It is for the module
init process, not for the update process.
Use SEAMLDR.INFO here.
For details, see "Intel Trust Domain Extensions - SEAM Loader (SEAMLDR)
Interface Specification".
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20260520133909.409394-10-chao.gao@intel.com
The TDX architecture uses the "SEAMCALL" instruction to communicate with
SEAM mode software. Right now, the only SEAM mode software that the kernel
communicates with is the TDX module. But, there is actually another
component that runs in SEAM mode but it is separate from the TDX module:
the persistent SEAM loader or "P-SEAMLDR". Right now, the only component
that communicates with it is the BIOS which loads the TDX module itself at
boot. But, to support updating the TDX module, the kernel now needs to be
able to talk to it.
P-SEAMLDR SEAMCALLs differ from TDX module SEAMCALLs in areas such as
concurrency requirements.
Add a P-SEAMLDR wrapper to handle these differences and prepare for
implementing concrete functions.
Use seamcall_prerr() (not '_ret') because current P-SEAMLDR calls do not
use any output registers other than RAX.
Note: Despite the similar name, the NP-SEAMLDR ("Non-Persistent")
(ACM) invoked exclusively by the BIOS at boot rather than a component
running in SEAM mode. The kernel cannot call it at runtime. It exposes
no SEAMCALL interface.
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://cdrdv2.intel.com/v1/dl/getContent/733582 # [1]
Link: https://patch.msgid.link/20260520133909.409394-9-chao.gao@intel.com
For TDX module updates, userspace needs to select compatible update
versions based on the current module version.
For example, the 1.5.x series runs on Sapphire Rapids but not Granite
Rapids, which needs 2.0.x. Updates are also constrained by version
distance, so a 1.5.6 module might permit updates to 1.5.7 but not to
1.5.20.
Start the process of punting the version selection logic to userspace.
Expose the TDX module version in the new faux device.
Define TDX_VERSION_FMT macro for the TDX version format since it will be
used multiple times. Also convert an existing print statement to use it.
== Background ==
For posterity, here's what other firmware mechanisms do:
1. AMD SEV leverages an existing PCI device for the PSP to expose
metadata. TDX uses a faux device as it doesn't have PCI device
in its architecture.
2. Microcode uses per-CPU virtual devices to report microcode revisions
because CPUs can have different revisions. But, there is only a
single TDX module, so exposing the TDX module version through a global
TDX faux device is appropriate
3. ARM's CCA implementation isn't in-tree yet, but will likely follow a
similar faux device approach, though it's unclear whether they need
to expose firmware version information
[ dhansen: trim changelog ]
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Reviewed-by: Xu Yilun <yilun.xu@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lore.kernel.org/all/2025073035-bulginess-rematch-b92e@gregkh/ # [1]
Link: https://patch.msgid.link/20260520133909.409394-8-chao.gao@intel.com
TDX depends on a platform firmware module that runs on the CPU.
Unlike other CoCo architectures, TDX has no hardware "device"
running the show, just a blob on the CPU.
Create a virtual device to anchor interactions with this platform
firmware. This lets later code:
- expose metadata: TDX module version, seamldr version, to userspace
as device attributes
- implement firmware uploader APIs (which are tied to a device) to
support TDX module runtime updates
Use a faux device because the TDX module is singular within the system
and has no platform resources. Using a faux device eliminates the need
to create a stub bus.
The call to tdx_get_sysinfo() ensures that the TDX module is ready to
provide services.
Note that AMD has a PCI device for the PSP for SEV and ARM CCA will
likely have a faux device [1].
Thanks to Dan and Yilun for all the help on this one.
[ dhansen: trim changelog ]
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Reviewed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Reviewed-by: Xu Yilun <yilun.xu@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/all/2025073035-bulginess-rematch-b92e@gregkh/ # [1]
Link: https://patch.msgid.link/20260520133909.409394-7-chao.gao@intel.com
TDX host core code implements three seamcall*() helpers to make SEAMCALLs
to the TDX module. Currently, they are implemented in <asm/tdx.h> and
are exposed to other kernel code which includes <asm/tdx.h>.
However, other than the TDX host core, seamcall*() are not expected to
be used by other kernel code directly. For instance, for all SEAMCALLs
that are used by KVM, the TDX host core exports a wrapper function for
each of them.
Move seamcall*() and related code out of <asm/tdx.h> and make them only
visible to TDX host core.
Since TDX host core tdx.c is already very heavy, don't put low level
seamcall*() code there but to a new dedicated "seamcall_internal.h". Also,
currently tdx.c has seamcall_prerr*() helpers which additionally print
error message when calling seamcall*() fails. Move them to
"seamcall_internal.h" as well. In such way all low level SEAMCALL helpers
are in a dedicated place, which is much more readable.
Copy the copyright notice from the original files and consolidate the
date ranges to:
Copyright (C) 2021-2023 Intel Corporation
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Tony Lindgren <tony.lindgren@linux.intel.com>
Reviewed-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Reviewed-by: Vishal Annapurve <vannapurve@google.com>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20260520133909.409394-6-chao.gao@intel.com
The kernel uses several global flags to guard one-time TDX initialization
flows and prevent them from being repeated.
When the TDX module is updated, all of those states must be reset so that
the module can be initialized again. Today those states are kept as
separate global variables, which makes the reset path awkward and easy to
miss when a new state is added.
Group the states into a single structure so they can be reset together, for
example with memset(), and so a newly added state won't be missed.
Drop the __ro_after_init annotation from tdx_module_initialized because
the other two states do not have it. And with TDX module update support,
all the states need to be writable at runtime.
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20260520133909.409394-4-chao.gao@intel.com
TDX module global initialization is executed only once. The first call
caches both the result and the "done" state, and later callers reuse the
saved result. A lock protects that cached states.
Those states and the lock are currently kept as function-local statics
because they are used only by try_init_module_global().
TDX module updates need to reset the cached states so TDX global
initialization can be run again after an update. That will add another
access site in the same file.
Move the cached states to file scope so it is accessible outside
try_init_module_global(), and move the lock along with the states it
protects.
No functional change intended.
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20260520133909.409394-3-chao.gao@intel.com
TDX module global initialization is executed only once. The first call
caches both the return code and the "done" state in static function
variables. Later callers read the variables. A lock protects the
saved state and serializes callers.
These variables will soon be moved to a global structure. Prepare for
that by treating the variables as a unit. Assign them together and
limit accesses to while the lock is held.
[ dhansen: mostly rewrite changelog ]
Signed-off-by: Chao Gao <chao.gao@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://patch.msgid.link/20260520133909.409394-2-chao.gao@intel.com
Unmap and unpin the GHCB as needed when freeing a vCPU. If the VM is
destroyed after mapping+pinning the GHCB on #VMGEXIT, without re-running
the vCPU, KVM will effectively leak the GHCB and any mappings created for
the GHCB.
Fixes: 291bd20d5d ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT")
Cc: stable@vger.kernel.org
Tested-by: Michael Roth <michael.roth@amd.com>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-18-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20260529183549.1104619-18-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Decouple synchronizing the GHCB SA from freeing/unpinning the SA, so that
the free/unpin path can be reused when freeing a vCPU.
Opportunistically add a WARN to harden KVM against stomping over (and thus
leaking) an already-allocated scratch area.
Cc: stable@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-17-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20260529183549.1104619-17-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Relocate sev_free_vcpu() down in sev.c so that it's definition comes after
sev_es_unmap_ghcb(). This will allow sharing unmap functionality between
the two functions without needing a forward declaration (or weird placement
of the common code).
No functional change intended.
Cc: stable@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-16-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20260529183549.1104619-16-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When marking a page dirty, complain about not having a running/loaded vCPU
if and only if the VM is still alive, i.e. its refcount is non-zero. This
will allow fixing a memory leak for x86 SEV-ES guests without hitting what
is effectively a false positive on the WARN.
For some SEV-ES VM-Exits, KVM keeps a writable mapping of a guest page
across an exit to userspace, and typically unmaps the page on the next
KVM_RUN. But if userspace never calls KVM_RUN after such an exit, then KVM
needs to unmap the page when the vCPU is destroyed, which in turn triggers
the WARN about not having a running vCPU.
Alternatively, SEV-ES could temporarily load the vCPU to suppress the WARN,
as is done in nested_vmx_free_vcpu() (but for completely unrelated reasons;
suppressing WARN from nested_put_vmcs12_pages() is pure happenstance). But
loading a vCPU during destruction is gross (ideally nVMX code would be
cleaned up), risks complicating the SEV-ES code (KVM would need to ensure
the temporarily load()+put() only runs when the vCPU isn't already loaded),
and is ultimately pointless.
The motivation for the WARN is to guard against KVM dirtying guest memory
without pushing the corresponding GFN to the active vCPU's dirty ring, e.g.
to ensure userspace doesn't miss a dirty page. But for the VM's refcount
to reach zero, there can't be _any_ userspace mappings to the dirty ring,
as mapping the dirty ring requires doing mmap() on the vCPU FD. I.e. if
userspace had a valid mapping for the dirty ring, then the vCPU file and
thus the owning VM would still be alive. And so since userspace can't
possibly reach the dirty ring, whether or not KVM technically "misses" a
push to the dirty ring is irrelevant.
Reported-by: Michael Roth <michael.roth@amd.com>
Cc: stable@vger.kernel.org
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-15-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20260529183549.1104619-15-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Rework Page State Change (PSC) handling to read the guest-provided start
and end indices exactly once, at the beginning of the request. Re-reading
the indices is "fine", _if_ the guest is well-behaved. KVM _should_ be
safe against concurrent guest modification of the indices, but there is
zero reason to introduce unnecessary risk.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-14-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20260529183549.1104619-14-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add a "psc" struct to vcpu_sev_es_state to avoid having to prefix all of
the fields with "psc_".
Take advantage of the code churn to opportunistically rename local
variables to "guest_psc" to make it more obvious that the buffer is guest
data, and more importantly, guest accessible!
Opportunistically rename inflight => batch_size as well, because there can
really only be one operation in-flight (per-vCPU), i.e. "inflight" _looks_
like a boolean, but in actuality is an integer tracking how many pages are
being handled by the current operation.
No functional change intended.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-13-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20260529183549.1104619-13-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Increment the guest-visible "cur_entry" index outside of the for-loop
when processing Page State Change entries, and add a comment to make it
more obvious which code is operating on trusted data, and which code is
touching guest-accessible data.
No functional change intended.
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-12-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20260529183549.1104619-12-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In debug_dma_sync_sg_for_device(), when iterating over a scatterlist,
the debug entry population mistakenly uses the head of the scatterlist
'sg' to fetch the physical address via sg_phys(), instead of using the
current iterator variable 's'.
This causes dma-debug to track the physical address of the very first
scatterlist entry for all subsequent entries in the list.
Fix this by passing the correct loop iterator 's' to sg_phys()
Fixes: 9d4f645a1f ("dma-debug: store a phys_addr_t in struct dma_debug_entry")
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/20260603123708.1665-1-lirongqing@baidu.com
Provide an s390 specific implementation of arch_this_cpu_write()
instead of the generic variant. The generic variant uses a quite
expensive raw_local_irq_save() / raw_local_irq_restore() pair.
Get rid of this by providing an own variant which makes use of the new
percpu code section infrastructure.
With this the text size of the kernel image is reduced by ~1k (defconfig).
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Provide an s390 specific implementation of arch_this_cpu_read() instead
of the generic variant. The generic variant uses preempt_disable() /
preempt_enable() pair and READ_ONCE().
Get rid of the preempt_disable() / preempt_enable() pairs by providing an
own variant which makes use of the new percpu code section infrastructure.
With this the text size of the kernel image is reduced by ~1k
(defconfig). Also 87 generated preempt_schedule_notrace() function
calls within the kernel image (modules not counted) are removed.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Convert arch_this_cpu_[and|or]() to make use of the new percpu code
section infrastructure.
There is no user of this_cpu_and() and only one user of this_cpu_or()
within the kernel. Therefore this conversion has hardly any effect,
and also removes only preempt_schedule_notrace() function call.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Convert arch_this_cpu_add_return() to make use of the new percpu code
section infrastructure.
With this the text size of the kernel image is reduced by ~4k
(defconfig). Also 66 generated preempt_schedule_notrace() function
calls within the kernel image (modules not counted) are removed.
Acked-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Add missing do { } while (0) constructs in order to avoid potential
build failures.
Reported-by: Sashiko <sashiko-bot@kernel.org>
Closes: https://sashiko.dev/#/patchset/20260319120503.4046659-1-hca%40linux.ibm.com
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
With the intended removal of PREEMPT_NONE this_cpu operations based on
atomic instructions, guarded with preempt_disable()/preempt_enable() pairs
become more expensive: the preempt_disable() / preempt_enable() pairs are
not optimized away anymore during compile time.
In particular the conditional call to preempt_schedule_notrace() after
preempt_enable() adds additional code and register pressure.
E.g. this simple C code sequence
DEFINE_PER_CPU(long, foo);
long bar(long a) { return this_cpu_add_return(foo, a); }
generates this code:
11a976: eb af f0 68 00 24 stmg %r10,%r15,104(%r15)
11a97c: b9 04 00 ef lgr %r14,%r15
11a980: b9 04 00 b2 lgr %r11,%r2
11a984: e3 f0 ff c8 ff 71 lay %r15,-56(%r15)
11a98a: e3 e0 f0 98 00 24 stg %r14,152(%r15)
11a990: eb 01 03 a8 00 6a asi 936,1 <- __preempt_count_add(1)
11a996: c0 10 00 d2 ac b5 larl %r1,1b70300 <- address of percpu var
11a9a0: e3 10 23 b8 00 08 ag %r1,952 <- add percpu offset
11a9a6: eb ab 10 00 00 e8 laag %r10,%r11,0(%r1) <- atomic op
11a9ac: eb ff 03 a8 00 6e alsi 936,-1 <- __preempt_count_dec_and_test()
11a9b2: a7 54 00 05 jnhe 11a9bc <bar+0x4c>
11a9b6: c0 e5 00 76 d1 bd brasl %r14,ff4d30 <preempt_schedule_notrace>
11a9bc: b9 e8 b0 2a agrk %r2,%r10,%r11
11a9c0: eb af f0 a0 00 04 lmg %r10,%r15,160(%r15)
11a9c6 07 fe br %r14
Even though the above example is more or less the worst case, since the
branch to preempt_schedule_notrace() requires a stackframe, which
otherwise wouldn't be necessary, there is also the conditional jnhe branch
instruction.
Get rid of the conditional branch with the following code sequence:
11a8e6: c0 30 00 d0 c5 0d larl %r3,1b33300
11a8ec: b9 04 00 43 lgr %r4,%r3
11a8f0: eb 00 43 c0 00 52 mviy 960,4
11a8f6: e3 40 03 b8 00 08 ag %r4,952
11a8fc: eb 52 40 00 00 e8 laag %r5,%r2,0(%r4)
11a902: eb 00 03 c0 00 52 mviy 960,0
11a908: b9 08 00 25 agr %r2,%r5
11a90c 07 fe br %r14
The general idea is that this_cpu operations based on atomic instructions
are guarded with mviy instructions:
- The first mviy instruction writes the register number, which contains
the percpu address variable to lowcore. This also indicates that a
percpu code section is executed.
- The first instruction following the mviy instruction must be the ag
instruction which adds the percpu offset to the percpu address register.
- Afterwards the atomic percpu operation follows.
- Then a second mviy instruction writes a zero to lowcore, which indicates
the end of the percpu code section.
- In case of an interrupt/exception/nmi the register number which was
written to lowcore is copied to the exception frame (pt_regs), and a zero
is written to lowcore.
- On return to the previous context it is checked if a percpu code section
was executed (saved register number not zero), and if the process was
migrated to a different cpu. If the percpu offset was already added to
the percpu address register (instruction address does _not_ point to the
ag instruction) the content of the percpu address register is adjusted so
it points to percpu variable of the new cpu.
Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
zcrypt_rng_device_add() allocates a buffer for the software random
number generator data cache.
This buffer can be allocated with kmalloc() as there's nothing special
about it to go directly to the page allocator.
kmalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object.
Performance difference between kmalloc() and __get_free_pages() is not
measurable as both allocators take an object/page from a per-CPU list for
fast path allocations.
For the slow path the performance is anyway determined by the amount of
reclaim involved rather than by what allocator is used.
Replace use of get_zeroed_page() with kzalloc() and free_page() with
kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
trng_read() allocates a temporary staging buffer for CPACF TRNG
random data before copying it to userspace.
This buffer can be allocated with kmalloc() as there's nothing special
about it to go directly to the page allocator.
kmalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object.
Performance difference between kmalloc() and __get_free_pages() is not
measurable as both allocators take an object/page from a per-CPU list for
fast path allocations.
For the slow path the performance is anyway determined by the amount of
reclaim involved rather than by what allocator is used.
Replace use of __get_free_page() with kmalloc() and free_page() with
kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
qeth_get_trap_id() allocates a temporary buffer for STSI system
information queries used to build trap identification strings.
This buffer can be allocated with kmalloc() as there's nothing special
about it to go directly to the page allocator.
kmalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object.
Performance difference between kmalloc() and __get_free_pages() is not
measurable as both allocators take an object/page from a per-CPU list for
fast path allocations.
For the slow path the performance is anyway determined by the amount of
reclaim involved rather than by what allocator is used.
Replace use of get_zeroed_page() with kzalloc() and free_page() with
kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
hvc_iucv_alloc() allocates a send staging buffer for accumulating
outbound terminal characters before they are copied into a separate
IUCV message buffer for transmission to the hypervisor. The staging
buffer itself is never passed to any IUCV function.
This buffer can be allocated with kmalloc() as there's nothing special
about it to go directly to the page allocator.
kmalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object.
Performance difference between kmalloc() and __get_free_pages() is not
measurable as both allocators take an object/page from a per-CPU list for
fast path allocations.
For the slow path the performance is anyway determined by the amount of
reclaim involved rather than by what allocator is used.
Replace use of get_zeroed_page() with kzalloc() and free_page() with
kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
DASD driver uses get_zeroed_page() to allocate pages for the Extended Error
Reporting software ring buffer and for a scratch buffer for formatting
sense dump diagnostic text.
These buffers can be allocated with kmalloc() as there's nothing special
about it to go directly to the page allocator.
kmalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object.
Performance difference between kmalloc() and __get_free_pages() is not
measurable as both allocators take an object/page from a per-CPU list for
fast path allocations.
For the slow path the performance is anyway determined by the amount of
reclaim involved rather than by what allocator is used.
Replace use of get_zeroed_page() with kzalloc() and free_page() with
kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
con3270_alloc_view() allocates a staging buffer used to assemble
3270 datastream content before it is copied into channel program
requests.
This buffer can be allocated with kmalloc() as there's nothing special
about it to go directly to the page allocator.
kmalloc() provides a better API that does not require ugly casts and
kfree() does not need to know the size of the freed object.
Performance difference between kmalloc() and __get_free_pages() is not
measurable as both allocators take an object/page from a per-CPU list for
fast path allocations.
For the slow path the performance is anyway determined by the amount of
reclaim involved rather than by what allocator is used.
Replace use of __get_free_page() with kmalloc() and free_page() with
kfree().
Link: https://lore.kernel.org/all/635405e4-9423-4a25-a6e7-e03c8ea0bcbe@redhat.com
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Move GR_NUM / VX_NUM macros to separate insn-common-asm.h header file
so they can be reused for non-fpu insn constructs.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Use the ".irp" directive to get rid of all the repeated ".ifc" usages
in fpu-insn-asm.h.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Steffen Eiden <seiden@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Rearrange some fields within AP and zcrypt structs to reduce
memory consumption and unused holes with the help of pahole
analysis of the code.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Finn Callies <fcallies@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
When the iommu is used the linearization of the mapping can give a single
block that is very large split across multiple SG entries.
When __rdma_block_iter_next() reassembles the split SG entries it is
overflowing the 32 bit stack values and computed the wrong DMA addresses
for blocks after the truncation.
Use the right types to hold DMA addresses.
Link: https://patch.msgid.link/r/1-v1-88303e9e509f+f7-ib_umem_types_jgg@nvidia.com
Cc: stable@vger.kernel.org
Fixes: a808273a49 ("RDMA/verbs: Add a DMA iterator to return aligned contiguous memory blocks")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Two of the SVE hwcaps added for the SVE features in the 2025 dpISA did
not explicitly call out their dependency on SVE in the ABI documentation.
Do so.
While we're here reorder the SVE and fature specific ID registers for
HWCAP3_SVE_LUT6 which did have the SVE dependency but listed it second
unlike the other SVE specific ID registers.
Fixes: abca5e69ab ("arm64/cpufeature: Define hwcaps for 2025 dpISA features")
Reported-by: Will Deacon <will@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
HiSilicon HIP09 implements TLB entry matching behavior that deviates
from the ARM architecture specification when the CNP (Common not Private)
bit is set in TTBRx_ELx.
When TTBRx.CNP=1, TLB entries may be incorrectly shared between CPU
cores, leading to TLB conflicts and stale mappings. This affects
coherency and can result in incorrect translations.
Add the hardware erratum workaround (Hisilicon erratum 162100125) to
disable CNP on affected HIP09 cores.
Co-developed-by: Tong Tiangen <tongtiangen@huawei.com>
Signed-off-by: Tong Tiangen <tongtiangen@huawei.com>
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Will Deacon <will@kernel.org>
The NVIDIA Carmel CNP erratum is not the only case requiring CNP to be
disabled. Abstract this into a common WORKAROUND_DISABLE_CNP capability
to facilitate adding errata for future chips and reduce duplicate
checks in has_useable_cnp().
This serves as a prerequisite for the subsequent Hisilicon erratum
162100125.
Suggested-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Zeng Heng <zengheng4@huawei.com>
Reviewed-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Will Deacon <will@kernel.org>
Xiang Mei reports that mac80211 could crash if eht_cap is set
but eht_oper isn't. Rather than fixing that for the individual
user(s), enforce that both HE/EHT have consistent elements.
Reported-by: Xiang Mei <xmei5@asu.edu>
Fixes: 22c64f37e1 ("wifi: mac80211: Update MCS15 support in link_conf")
Link: https://patch.msgid.link/20260603091812.101894-2-johannes@sipsolutions.net
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
A compute shader dispatch encodes its workgroup counts in the CFG0..CFG2
registers. Kicking off a dispatch with a zero count in any of the three
dimensions is invalid. First, the hardware will process 0 as 65536,
while the user-space driver exposes a maximum of 65535. Over that, a
submission with a zeroed workgroup dimension should be a no-op.
These zeroed counts can reach the dispatch path through an indirect CSD
job, whose workgroup counts are only known once the indirect buffer is
read and may legitimately be zero, but such scenario should only result in
a no-op.
Overwrite the indirect CSD job workgroup counts with the indirect BO
ones, even if they are zeroed, and don't submit the job to the hardware
when any of the workgroup counts is zero, so the job completes immediately
instead of running the shader.
Cc: stable@vger.kernel.org
Fixes: d223f98f02 ("drm/v3d: Add support for compute shader dispatch.")
Suggested-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260602-v3d-fix-indirect-csd-v4-2-654309e32bc0@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
v3d_rewrite_csd_job_wg_counts_from_indirect() maps both the indirect
buffer and the workgroup buffer and is expected to release them before
returning. When any of the workgroup counts read from the buffer is zero,
the function bailed out early and skipped the cleanup, leaking the vaddr
mappings of both BOs.
Jump to the cleanup path instead of returning directly, so the mappings
are always dropped.
Cc: stable@vger.kernel.org
Fixes: 18b8413b25 ("drm/v3d: Create a CPU job extension for a indirect CSD job")
Suggested-by: Jose Maria Casanova Crespo <jmcasanova@igalia.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Link: https://patch.msgid.link/20260602-v3d-fix-indirect-csd-v4-1-654309e32bc0@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Tracepoint handlers no longer run with preemption disabled by default
since a46023d561 ("tracing: Guard __DECLARE_TRACE() use of
__DO_TRACE_CALL() with SRCU-fast"), the opid monitor should now count 1
in the preemption count as preemption disabled.
Change the rule for preempt_off to preempt > 0.
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260601153840.124372-11-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
Tracepoint handlers are fully preemptible after a46023d561 ("tracing:
Guard __DECLARE_TRACE() use of __DO_TRACE_CALL() with SRCU-fast"). When
a per-CPU monitor handles an event, it retrieves the monitor state using
a per-CPU pointer. If the event itself doesn't disable preemption, the
task can migrate to a different CPU and we risk updating the wrong
monitor.
Mitigate this by explicitly disabling task migration before acquiring
the monitor pointer. This cannot guarantee the monitor runs on the
correct CPU but reduces the race condition window and prevents warnings.
Reviewed-by: Wen Yang <wen.yang@linux.dev>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260601153840.124372-10-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
HA monitors may start timers, all cleanup functions currently stop the
timers asynchronously to avoid sleeping in the wrong context.
Nothing makes sure running callbacks terminate on cleanup.
Run the entire HA timer callback in an RCU read-side critical section,
this way we can simply synchronize_rcu() with any pending timer and are
sure any cleanup using kfree_rcu() runs after callbacks terminated.
Additionally make sure any unlikely callback running late won't run any
code if the monitor is marked as disabled or if destruction started.
Use memory barriers to serialise with racing resets.
Fixes: f5587d1b6e ("rv: Add Hybrid Automata monitor type")
Fixes: 4a24127bd6 ("rv: Add support for per-object monitors in DA/HA")
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://lore.kernel.org/r/20260601153840.124372-9-gmonaco@redhat.com
Signed-off-by: Gabriele Monaco <gmonaco@redhat.com>
