module_flash_fw_schedule() is missing undo for setting
the "in_progress" flag and taking the netdev reference.
Delay taking these, the device can't disappear while
we are holding rtnl_lock.
Fixes: 32b4c8b53e ("ethtool: Add ability to flash transceiver modules' firmware")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When validate() fails we are skipping over ethnl_ops_complete()
even tho we already called ethnl_ops_begin().
Fixes: 32b4c8b53e ("ethtool: Add ability to flash transceiver modules' firmware")
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Link: https://patch.msgid.link/20260522231312.1710836-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
ethtool: rss: fix a handful of small bugs
Fix a handful of small bugs in the ethtool Netlink RSS code.
====================
Link: https://patch.msgid.link/20260522230647.1705600-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We wait with filling the reply for new RSS context creation
until after the driver ->create_rxfh_context call. The driver
needs to fill some of the defaults in the context. The failure
of rss_fill_reply() is somewhat theoretical, but doesn't take
much effort to handle it properly. Call ->remove_rxfh_context().
If the driver's remove callback fails (some implementations like sfc
can return real command errors from firmware RPCs) - skip the xa_erase
and kfree, leaving the context in the xarray. This matches how
ethnl_rss_delete_doit() behaves.
Fixes: a166ab7816 ("ethtool: rss: support creating contexts via Netlink")
Link: https://patch.msgid.link/20260522230647.1705600-7-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rss_get_data_alloc() allocates a single buffer that backs both the
indirection table and the hash key, but only assigned data->indir_table
when indir_size was nonzero. The expectation was that no driver
implements RSS without supporting indirection table but apparently
enic does just that (it's the only such in-tree driver).
enic has get_rxfh_key_size but no get_rxfh_indir_size.
data->indir_table stays as NULL, hkey gets set but rss_get_data_free()
kfree(data->indir_table) is a nop and the allocation leaks.
Always store the allocation base in data->indir_table so the free path
is unambiguous. No caller treats indir_table as a sentinel; everything
keys off indir_size.
Fixes: 7112a04664 ("ethtool: add netlink based get rss support")
Link: https://patch.msgid.link/20260522230647.1705600-6-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rss_prepare_get() allocates the indirection table and hash key buffer
via rss_get_data_alloc(), then calls ops->get_rxfh() to populate them.
If get_rxfh() fails, the function returns an error without freeing
the allocation.
Fixes: 4f038a6a02 ("net: ethtool: Don't call .cleanup_data when prepare_data fails")
Link: https://patch.msgid.link/20260522230647.1705600-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
rss_set_prep_indir() compares the new indirection table against the
current one to determine whether any update is needed. The memcmp
call passes data->indir_size as the length argument, but indir_size
is the number of u32 entries, not the byte count.
Fixes: c0ae03588b ("ethtool: rss: initial RSS_SET (indirection table handling)")
Link: https://patch.msgid.link/20260522230647.1705600-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Remember to set ret before jumping out if someone tries
to delete a context on a device which doesn't support
contexts.
Fixes: fbe09277fa ("ethtool: rss: support removing contexts via Netlink")
Link: https://patch.msgid.link/20260522230647.1705600-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Gemini says that we're modifying the RSS_CREATE response skb.
I think it's right, the comment says that unicast() should
unshare the skb but I'm not entirely sure what I meant there.
netlink_trim() does a copy but only if skb is not well sized
(it's at least 2x larger than necessary for the payload).
Fixes: a166ab7816 ("ethtool: rss: support creating contexts via Netlink")
Link: https://patch.msgid.link/20260522230647.1705600-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 4e16c11752 ("cpufreq/amd-pstate: Stop caching EPP") removed
the epp_cached field from struct amd_cpudata in favour of always
reading from cppc_req_cached, but the kdoc above the struct still
documents @epp_cached.
Drop the now-stale @epp_cached entry.
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Fixes: 4e16c11752 ("cpufreq/amd-pstate: Stop caching EPP")
Signed-off-by: Zhan Xusheng <zhanxusheng@xiaomi.com>
Link: https://lore.kernel.org/r/20260526022131.1302373-1-zhanxusheng@xiaomi.com
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
socfpga_smp_prepare_cpus() looks up the Cortex-A9 SCU node with
of_find_compatible_node(), which returns a node reference that must be
released with of_node_put().
The function maps the SCU registers and then returns without dropping
that reference, leaking the node on both the success path and the
of_iomap() failure path.
Drop the reference once the mapping attempt is complete. The returned
MMIO mapping does not depend on keeping the device node reference held.
Fixes: 122694a0c7 ("ARM: socfpga: use of_iomap to map the SCU")
Cc: stable@vger.kernel.org
Signed-off-by: Yuho Choi <dbgh9129@gmail.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
mod_delayed_work() unconditionally queues the work even when it wasn't
previously pending, which can fire the timeout prematurely or restart it
after it already fired. Add a delayed_work_pending() guard to restore
the originally intended semantics.
Premature firing calls fw_devlink_drivers_done() before all built-in
drivers have registered, causing fw_devlink to prematurely relax device
links for suppliers whose drivers haven't loaded yet.
Fixes: 1137838865 ("driver core: Use mod_delayed_work to prevent lost deferred probe work")
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20260525012340.3860581-2-dakr@kernel.org
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Reading /proc/interrupts iterates over the interrupt number space one by
one and looks up the descriptors one by one. That's just a waste of time.
When CONFIG_GENERIC_IRQ_SHOW is enabled this can utilize the maple tree and
cache the descriptor pointer efficiently for the sequence file operations.
Implement a CONFIG_GENERIC_IRQ_SHOW specific version in the core code and
leave the fs/proc/ variant for the legacy architectures which ignore generic
code.
This reduces the time wasted for looking up the next record significantly.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Link: https://patch.msgid.link/20260517194932.165280601@kernel.org
The chip name column in the /proc/interrupt output is 8 characters and
right aligned, which causes visual clutter due to the fixed length and the
alignment. Many interrupt chips, e.g. PCI/MSI[X] have way longer names.
Update the length when a chip is assigned to an interrupt and utilize this
information for the output. Align it left so all chip names start at the
begin of the column.
Update the GDB script as well and disentangle the header maze so it
actually works with all .config combinations.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Link: https://patch.msgid.link/20260517194932.085786035@kernel.org
... in preparation for a smarter iterator for /proc/interrupts.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Link: https://patch.msgid.link/20260517194932.005787611@kernel.org
Prepare for a smarter iterator for /proc/interrupts so that the next
interrupt descriptor can be cached after lookup.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Link: https://patch.msgid.link/20260517194931.917415190@kernel.org
Quite some architectures have four character wide acronyms for architecture
specific interrupts like IPI, NMI, etc.
The default precision of printing the Linux device interrupt numbers is
three, which causes quite some code to play games with adding or omitting
space after the acronym and the colon in order to keep the per CPU numbers
properly aligned.
Increase the default number precision to four in the core code and get rid
of the space games all over the place. At the same time align all
architecture specific descriptor texts left so that they show up in the
same column as the interrupt chip names, which makes the output more
uniform accross architectures. Fix up the GDB script to this new scheme as
well.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260517194931.839482411@kernel.org
Calculating the precision of the interrupt number column on every initial
show_interrupt() invocation is a pointless exercise as the underlying
maximum number of interrupts rarely changes.
Calculate it only when that number is modified and let show_interrupts()
use the cached value.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Reviewed-by: Radu Rendec <radu@rendec.net>
Link: https://patch.msgid.link/20260517194931.760664517@kernel.org
show_interrupts() evaluates a boatload of conditions to establish whether
it should expose an interrupt in /proc/interrupts or not.
That can be simplified by caching the condition in an internal status flag,
which is updated when one of the relevant inputs changes.
The irq_desc::kstat_irq check is dropped because visible interrupt
descriptors always have a valid pointer.
As a result the number of instructions and branches for reading
/proc/interrupts is reduced significantly.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Reviewed-by: Radu Rendec <radu@rendec.net>
Link: https://patch.msgid.link/20260517194931.680943749@kernel.org
Eventually blocking functions cannot be invoked with interrupts disabled
and a raw spin lock held. Restructure the code so this happens outside of
the descriptor lock held region.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/20260517194931.601972758@kernel.org
... to avoid function calls in the core code to retrieve the maximum number
of interrupts.
Rename it to 'total_nr_irqs' as 'nr_irqs' is too generic and fix up the
'nr_irqs' reference in the related GDB script as well.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Reviewed-by: Radu Rendec <radu@rendec.net>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Link: https://patch.msgid.link/20260517194931.522168332@kernel.org
x86 changed the interrupt statistics from a struct with individual members
to an counter array. It also provides a corresponding info array with the
strings for prefix and description and an indicator to skip the entry.
Update the already out of sync GDB script to use the counter and the info
array, which keeps the GDB script in sync automatically.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20260517194931.442613033@kernel.org
The special treatment of these counts is just adding extra code for no real
value. The irq_stats mechanism allows to suppress output of counters, which
should never happen by default and provides a mechanism to enable them for
the rare case that they occur.
Move the IOAPIC misrouted and the PIC/APIC error counts into irq_stats,
mark them suppressed by default and update the sites which increment them.
This changes the output format of 'ERR' and 'MIS' in case there are events
to the regular per CPU display format and otherwise suppresses them
completely.
As a side effect this removes the arch_cpu_stat() mechanism from proc/stat
which was only there to account for the error interrupts on x86 and missed
to take the misrouted ones into account.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Radu Rendec <radu@rendec.net>
Link: https://patch.msgid.link/20260517194931.361942103@kernel.org
Unlikely interrupt counters like the spurious vector and the synthetic APIC
ICR read retry show up in /proc/interrupts with all counts 0 most of the
time.
As these are events which should never happen, suppress them by default and
enable them for output when they actually happen.
This requires a seperate bitmap as the description array is marked
__ro_after_init. With that bitmap in place it becomes RO data.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Radu Rendec <radu@rendec.net>
Link: https://patch.msgid.link/20260517194931.276486277@kernel.org
Having the x86 specific interrupt statistics as a data structure with
individual members instead of an array is just stupid as it requires
endless copy and paste in arch_show_interrupts() and arch_irq_stat_cpu(),
where the latter does not even take the latest interrupt additions into
account. The resulting #ifdef orgy is just disgusting.
Convert it to an array of counters, which does not make a difference in the
actual interrupt hotpath increment as the array index is constant and
therefore not any different than the member based access.
But in arch_show_interrupts() and arch_irq_stat_cpu() this just turns into
a loop, which reduces the text size by ~2k (~12%):
text data bss dec hex filename
19643 15250 904 35797 8bd5 ../build/arch/x86/kernel/irq.o
17355 15250 904 33509 82e5 ../build/arch/x86/kernel/irq.o
Adding a new vector or software counter only requires to update the table
and everything just works. Using the core provided emit function which
speeds up 0 outputs makes it significantly faster.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Radu Rendec <radu@rendec.net>
Link: https://patch.msgid.link/20260517194931.196070643@kernel.org
Interrupts which are not marked per CPU increment not only the per CPU
statistics, but also the accumulation counter irq_desc::tot_count.
Change the counter to type unsigned long so it does not produce sporadic
zeros due to wrap arounds on 64-bit machines and do a quick check for non
per CPU interrupts. If the counter is zero, then simply emit a full set of
zero strings. That spares the evaluation of the per CPU counters completely
for interrupts with zero events.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Reviewed-by: Radu Rendec <radu@rendec.net>
Link: https://patch.msgid.link/20260517194931.115522199@kernel.org
A large portion of interrupt count entries are zero. There is no point in
formatting the zero value as it is way cheeper to just emit a constant
string.
Collect the number of consecutive zero counts and emit them in one go
before a non-zero count and at the end of the line.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Dmitry Ilvokhin <d@ilvokhin.com>
Reviewed-by: Radu Rendec <radu@rendec.net>
Reviewed-by: Shrikanth Hegde <sshegde@linux.ibm.com>
Link: https://patch.msgid.link/20260517194931.034728540@kernel.org
Monitoring tools periodically scan /proc/interrupts to export metrics as a
timeseries for future analysis and investigation.
In large fleets, /proc/interrupts is polled (often every few seconds) on
every machine. The cumulative overhead adds up quickly across thousands
of nodes, so reducing the cost of generating these stats does have a
measurable operational impact. With the ongoing trend toward higher core
counts per machine, this cost becomes even more noticeable over time,
since interrupt counters are per-CPU. In Meta's fleet, we have observed
this overhead at scale.
Although a binary /proc interface would be a better long-term solution
due to lower formatting (kernel side) and parsing (userspace side)
overhead, the text interface will remain in use for some time, even if
better solutions will be available. Optimizing the /proc/interrupts
printing code is therefore still beneficial.
Function seq_printf() supports rich format string for decimals printing,
but it doesn't required for printing /proc/interrupts per CPU counters,
seq_put_decimal_ull_width() function can be used instead to print per
CPU counters, because very limited formatting is required for this case.
Similar optimization idea is already used in show_interrupts().
As a side effect this aligns the x86 decriptions with the generic
interrupts event descriptions.
Performance counter stats (truncated) for 'sh -c cat /proc/interrupts
Before:
3.42 msec task-clock # 0.802 CPUs utilized ( +- 0.05% )
1 context-switches # 291.991 /sec ( +- 0.74% )
0 cpu-migrations # 0.000 /sec
343 page-faults # 100.153 K/sec ( +- 0.01% )
8,932,242 instructions # 1.66 insn per cycle ( +- 0.34% )
5,374,427 cycles # 1.569 GHz ( +- 0.04% )
1,483,154 branches # 433.068 M/sec ( +- 0.22% )
28,768 branch-misses # 1.94% of all branches ( +- 0.31% )
0.00427182 +- 0.00000215 seconds time elapsed ( +- 0.05% )
After:
2.39 msec task-clock # 0.796 CPUs utilized ( +- 0.06% )
1 context-switches # 418.541 /sec ( +- 0.70% )
0 cpu-migrations # 0.000 /sec
343 page-faults # 143.560 K/sec ( +- 0.01% )
7,020,982 instructions # 1.30 insn per cycle ( +- 0.52% )
5,397,266 cycles # 2.259 GHz ( +- 0.06% )
1,569,648 branches # 656.962 M/sec ( +- 0.08% )
25,419 branch-misses # 1.62% of all branches ( +- 0.72% )
0.00299996 +- 0.00000206 seconds time elapsed ( +- 0.07% )
Relative speed up in time elapsed is around 29%.
[ tglx: Fixed it up so it applies to current mainline ]
Signed-off-by: Dmitry Ilvokhin <d@ilvokhin.com>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Tested-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Radu Rendec <radu@rendec.net>
Link: https://patch.msgid.link/aQj5mGZ6_BBlAm3B@shell.ilvokhin.com
Link: https://patch.msgid.link/20260517194930.949709489@kernel.org
When build-testing this driver without CONFIG_IRQ_DOMAIN causes
a compile-time error:
drivers/regulator/mt6363-regulator.c: In function 'mt6363_regulator_probe':
drivers/regulator/mt6363-regulator.c:884:18: error: implicit declaration of function 'irq_find_host' [-Wimplicit-function-declaration]
884 | domain = irq_find_host(interrupt_parent);
| ^~~~~~~~~~~~~
drivers/regulator/mt6363-regulator.c:884:16: error: assignment to 'struct irq_domain *' from 'int' makes pointer from integer without a cast [-Wint-conversion]
884 | domain = irq_find_host(interrupt_parent);
| ^
drivers/regulator/mt6363-regulator.c:896:30: error: implicit declaration of function 'irq_create_fwspec_mapping'; did you mean 'irq_create_of_mapping'? [-Wimplicit-function-declaration]
896 | info->virq = irq_create_fwspec_mapping(&fwspec);
| ^~~~~~~~~~~~~~~~~~~~~~~~~
| irq_create_of_mapping
This is rather hard to trigger because so many other drivers
enable IRQ_DOMAIN already, but I ran into this on an s390
randconfig build.
Ensure this is always enabled using a Kconfig 'select IRQ_DOMAIN'
entry, as we do for all other users of this.
Fixes: 3c36965df8 ("regulator: Add support for MediaTek MT6363 SPMI PMIC Regulators")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20260526102003.2527570-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The CRC uncompressed buffer pointer array has the same lifetime as
struct crc_data, but it is currently allocated separately. That adds
another allocation failure path and a matching cleanup branch without
providing any extra flexibility.
Store the pointer array as a flexible array member and allocate it
together with the crc_data using kzalloc_flex(). The array remains
zero-initialized, while the allocation and error handling become
simpler.
Assisted-by: Codex:GPT-5.5
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Link: https://patch.msgid.link/20260510213948.41750-1-rosenp@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
pskb_trim_rcsum_slow() keeps CHECKSUM_COMPLETE valid by subtracting
the checksum of the bytes removed from the skb tail. That assumes the
removed bytes can be read.
io_uring zcrx skbs may contain unreadable net_iov frags. With fbnic
header/data split, small TCP/IPv4 packets can carry Ethernet padding
in such a frag. ip_rcv_core() trims the skb to iph->tot_len before TCP
sees it, and the CHECKSUM_COMPLETE adjustment then calls
skb_checksum() on the padding.
This is exposed by IPv4 because small TCP/IPv4 frames can be shorter
than the Ethernet minimum payload. TCP/IPv6 frames are large enough in
the normal zcrx path, so they do not hit the same padding trim.
Keep the existing checksum adjustment for readable skbs. If the
remaining packet is fully linear, drop CHECKSUM_COMPLETE and let the
stack validate the packet after trimming. If unreadable payload would
remain, fail the trim; the checksum cannot be adjusted without reading
the trimmed tail.
Also clear skb->unreadable when trimming removes all frags.
Fixes: 65249feb6b ("net: add support for skbs with unreadable frags")
Signed-off-by: Björn Töpel <bjorn@kernel.org>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20260522120643.242974-1-bjorn@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
tb_xdomain_copy() copies req->response_size bytes from the received
packet buffer regardless of the actual frame size. When a short
response arrives, this reads past the valid frame data in the DMA
pool buffer into stale contents from previous transactions.
Use the minimum of frame size and expected response size for the
copy length.
Fixes: cdae7c07e3 ("thunderbolt: Add support for XDomain properties")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
tb_xdp_handle_request() casts the received packet buffer to
protocol-specific structs without verifying that the allocation
is large enough for the target type. A peer can send a minimal
XDomain packet that passes the generic header length check but is
shorter than the struct accessed after the cast, causing out-of-
bounds reads from the kmemdup allocation.
Plumb the packet length through xdomain_request_work and validate
it against the expected struct size before each cast.
Fixes: 8e1de70425 ("thunderbolt: Add support for XDomain lane bonding")
Fixes: cdae7c07e3 ("thunderbolt: Add support for XDomain properties")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
tb_xdp_properties_request() derives the per-packet copy length from
the response header without checking that it fits in the previously
allocated data buffer. A malicious peer can set its length field
larger than the declared data_length, causing memcpy to write past
the kcalloc allocation.
Clamp the per-packet copy length so that the cumulative offset
never exceeds data_len.
Fixes: cdae7c07e3 ("thunderbolt: Add support for XDomain properties")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
__tb_property_parse_dir() does not check that content_offset +
content_len fits within block_len for the root directory case.
When rootdir->length equals or exceeds block_len - 2, the entry
loop reads past the allocated property block.
Add a bounds check after computing content_offset and content_len
to reject directories whose content extends past the block.
Fixes: cdae7c07e3 ("thunderbolt: Add support for XDomain properties")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
tb_property_entry_valid() accepts entries with length == 0 for
DIRECTORY, DATA, and TEXT types. A zero-length TEXT entry passes
validation but causes an underflow in the null-termination logic:
property->value.text[property->length * 4 - 1] = '\0';
When property->length is 0 this writes to offset -1 relative to
the allocation.
Reject zero-length entries early in the validator since they have no
valid representation in the XDomain property protocol.
Fixes: cdae7c07e3 ("thunderbolt: Add support for XDomain properties")
Cc: stable@vger.kernel.org
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
When topology_physical_package_id()/topology_logical_die_id() returns
a negative value, rapl_add_package_cpuslocked() returns ERR_PTR(-EINVAL)
directly without freeing the rapl_package structure that was just
allocated by kzalloc_obj(), leaking memory on every failed package
addition.
Use the existing err_free_package label so that the allocation is
released on the error path.
Signed-off-by: Sumeet Pawnikar <sumeet4linux@gmail.com>
Link: https://patch.msgid.link/20260515182616.227707-1-sumeet4linux@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The reason for pick_next_task_fair() is the put/set optimization that
avoids touching the common ancestors. However, it is possible to
implement this in the put_prev_task() and set_next_task() calls as
used in put_prev_set_next_task().
Notably, put_prev_set_next_task() is the only site that:
- calls put_prev_task() with a .next argument;
- calls set_next_task() with .first = true.
This means that put_prev_task() can determine the common hierarchy and
stop there, and then set_next_task() can terminate where put_prev_task
stopped.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://patch.msgid.link/20260511120628.057634261@infradead.org
With commit 50653216e4 ("sched: Add support to pick functions to
take rf") removing the balance callback, the pick_task() callback is
in charge of newidle balancing.
This means pick_task_fair() should do so too. This hasn't been a
problem in practise because pick_next_task_fair() is used. However,
since we'll be removing that one shortly, make sure pick_next_task()
is up to scratch.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://patch.msgid.link/20260511120627.944705718@infradead.org
Robots figured out you can read and write this concurrently and got
'upset'. Gemini even noted sched_dynamic_show() can generate
'confusing' output if it observed different values during the
printing.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260511120627.176946327@infradead.org
Commit c9d93a73ce ("sched/fair: Drop redundant RCU read lock in NOHZ
kick path") removed the rcu_read_lock()/unlock() pair from
set_cpu_sd_state_busy() and set_cpu_sd_state_idle() on the assumption
that all callers run in a safe context for rcu_dereference_all(): IRQs
disabled or cpus_write_lock() held.
That assumption is wrong for the CPU hotplug teardown path. When CPUs
are taken offline, set_cpu_sd_state_busy() is invoked via:
cpuhp/N kthread
cpuhp_thread_fun()
cpuhp_invoke_callback()
sched_cpu_deactivate()
nohz_balance_exit_idle()
set_cpu_sd_state_busy()
rcu_dereference_all(per_cpu(sd_llc, cpu))
The cpuhp kthread holds cpu_hotplug_lock (percpu-rwsem) but runs with
preemption and IRQs enabled. As a result, lockdep correctly reports a
suspicious RCU usage on CPU offline, e.g.:
# echo 0 > /sys/devices/system/cpu/cpu1/online
=============================
WARNING: suspicious RCU usage
-----------------------------
kernel/sched/fair.c:12793 suspicious rcu_dereference_check() usage!
...
2 locks held by cpuhp/1/20:
#0: (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x42/0x1ae
#1: (cpuhp_state-down){+.+.}-{0:0}, at: cpuhp_thread_fun+0x72/0x1ae
Call Trace:
lockdep_rcu_suspicious
nohz_balance_exit_idle
sched_cpu_deactivate
cpuhp_invoke_callback
cpuhp_thread_fun
smpboot_thread_fn
Fix this by adding RCU read lock coverage to the one caller that lacks
it: nohz_balance_exit_idle() in the CPU hotplug teardown.
The other callers (nohz_balancer_kick() and nohz_balance_enter_idle())
genuinely run with IRQs disabled, so they remain unchanged.
Fixes: c9d93a73ce ("sched/fair: Drop redundant RCU read lock in NOHZ kick path")
Closes: https://lore.kernel.org/all/38fe0a1d-1a48-435a-910a-c278024d9ac9@samsung.com/
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260522092523.2046095-1-arighi@nvidia.com
Without this, CRYPTO_LZ4 had to be manually enabled in the config
to use LZ4 for hibernation compression. Add the select so it gets
pulled in automatically when hibernation is enabled, just like
CRYPTO_LZO already does.
Tested-by: l1rox3 <l1rox3.developer@gmail.com>
Signed-off-by: l1rox3 <l1rox3.developer@gmail.com>
Link: https://patch.msgid.link/20260520081254.13493-1-l1rox3.developer@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add SM_THERMAL_CALIB_READ at SMC ID 0x82000047 in the command
table and implement meson_sm_get_thermal_calib(), which forwards the
tsensor_id argument to the secure monitor and returns the calibration data.
Also realign the CMD() column to improve readability.
Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
[ dlezcano: Fixed kernel-doc format warning ]
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260424-add-thermal-t7-vim4-v5-3-9040ca36afe2@aliel.fr
Add SM_THERMAL_CALIB_READ to the secure monitor command enum and
introduce meson_sm_get_thermal_calib() to allow drivers to retrieve
thermal sensor calibration data through the firmware interface.
Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260424-add-thermal-t7-vim4-v5-2-9040ca36afe2@aliel.fr
Add the amlogic,t7-thermal compatible for the Amlogic T7 thermal sensor.
Unlike existing variants which use a phandle to the ao-secure syscon,
the T7 relies on a secure monitor interface described by a phandle and
a sensor index argument.
The T7 integrates multiple thermal sensors, all accessed through the
same SMC call. The sensor index argument is required to identify which
sensor's calibration data the secure monitor should return, as a single
SM_THERMAL_CALIB_READ command serves all of them.
Introduce the amlogic,secure-monitor property as a phandle-array and
make amlogic,ao-secure or amlogic,secure-monitor conditionally required
depending on the compatible.
Signed-off-by: Ronald Claveau <linux-kernel-dev@aliel.fr>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20260424-add-thermal-t7-vim4-v5-1-9040ca36afe2@aliel.fr
Use devm_add_action_or_reset() which does the replaced code. It
results in a simpler and more concise code.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Link: https://patch.msgid.link/20260429161430.3802970-2-daniel.lezcano@oss.qualcomm.com
Use devm_thermal_of_cooling_device_register() to simplify resource
management and avoid manual cleanup in error paths.
As a side effect this change has the benefit of solving an existing
issue. Before, the function tegra_soctherm_remove() only called
debugfs_remove_recursive() and never called thermal_cooling_device_unregister()
for any of the cooling devices registered here.
After the driver removal, the thermal framework's cdev list would
still hold references to thermal_cooling_device objects whose devdata
pointer (ts) pointed to memory already freed by the platform device's
devm cleanup.
With this change, the cooling device is unregistered when the driver
is removed, thus fixing the issue above.
Signed-off-by: Daniel Lezcano <daniel.lezcano@oss.qualcomm.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/20260424160019.41710-2-daniel.lezcano@oss.qualcomm.com
