Include the definition of struct tty_driver in tty_port.h to keep the
header self-contained and avoid build breakage in case anyone includes
it before tty_driver.h.
Fixes: eb3b0d92c9 ("tty: tty_port: add workqueue to flip TTY buffer")
Cc: Xin Zhao <jackzxcui1989@163.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20260506124323.186703-1-johan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
UART_RX_PAR_EN is incorrectly defined as bit 3, which triggers false
framing errors (S_GP_IRQ_1_EN) and causes received data to be dropped
when parity is enabled and the parity bit is 0.
Define UART_RX_PAR_EN as bit 4 of the SE_UART_RX_TRANS_CFG register, as
specified in the reference manual.
Fixes: c4f528795d ("tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP")
Cc: stable <stable@kernel.org>
Signed-off-by: Prasanna S <prasanna.s@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Link: https://patch.msgid.link/20260428-serial-bit-correct-v1-1-9131ad5b97d8@oss.qualcomm.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The sci_request_port() function uses request_mem_region() to reserve
I/O memory, but in the error path when sci_remap_port() fails, it
incorrectly calls release_resource() instead of release_mem_region().
This mismatch can cause resource accounting issues. Fix it by using
the correct release function, consistent with sci_release_port().
Fixes: e265164708 ("serial: sh-sci: Handle port memory region reservations.")
Cc: stable <stable@kernel.org>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202604032356.SzEjYkBC-lkp@intel.com/
Signed-off-by: Hongling Zeng <zenghongling@kylinos.cn>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20260421065737.724187-1-zenghongling@kylinos.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add a check for dma_alloc_coherent() failure to prevent a potential
NULL pointer dereference in dma_handle_rx(). Properly release DMA
channels and the PCI device reference using a goto ladder if the
allocation fails.
Fixes: 3c6a483275 ("Serial: EG20T: add PCH_UART driver")
Cc: stable <stable@kernel.org>
Signed-off-by: Zhaoyang Yu <2426767509@qq.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patch.msgid.link/tencent_E328416B7CFD436F6029F2DF02AD7ED89C08@qq.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix a thinko in the status interrupt handler that has caused counters
for the RI and DSR modem line transitions to be used for the other line
each.
Fixes: 8b4a40809e ("zs: move to the serial subsystem")
Cc: stable <stable@kernel.org>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://patch.msgid.link/alpine.DEB.2.21.2604101747110.29980@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Just like all other driver structures, the id_table should never be
modified by core subsystem parts. Constify this member and actual data
structures for increased code safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
By convention MODULE_DEVICE_TABLE() immediately follows the ID table it
exports, because this is easier to read and verify. It also makes more
sense since #ifdef for ACPI or OF could hide both of them.
Most of the privers already have this correctly placed, so adjust
the missing ones. No functional impact.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Add support for the SD Card/MMC Interface in the Renesas R-Car M3Le
(R8A779MD) SoC. R19UH0260EJ0100 Rev.1.00 , Dec 25, 2025 Notes 7.70.
indicates that HS400 mode is not supported.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Document support for the SD Card/MMC Interface in the Renesas R-Car M3Le
(R8A779MD) SoC.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The current iomap_inline_data_valid() check ensures that inline data
does not cross a PAGE_SIZE boundary. However, this is an unnecessarily
strict constraint. If a filesystem provides a valid iomap::inline_data
pointer and iomap::length, we should trust that the caller has mapped
sufficient memory for the range, even if it spans across page boundaries.
Removing this check allows filesystems to point directly to their
internal data structures without forced page-alignment or additional
redundant allocations. This remove iomap_inline_data_valid() and
its callers in buffered and direct I/O paths.
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Link: https://patch.msgid.link/20260511141151.6021-1-linkinjeon@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
Chuck Lever <cel@kernel.org> says:
I'm attempting to implement enough support in the Linux VFS to
enable file services like NFSD and ksmbd (and user space
equivalents) to provide the actual status of case folding support
in local file systems. The default behavior for local file systems
not explicitly supported in this series is to reflect the usual
POSIX behaviors:
case-insensitive = false
case-nonpreserving = false
The case-insensitivity and case-nonpreserving booleans can be
consumed immediately by NFSD. These two attributes have been part of
the NFSv3 and NFSv4 protocols for decades, in order to support NFS
client implementations on non-POSIX systems.
Support for user space file servers is why this series exposes case
folding information via a user-space API. I don't know of any other
category of user-space application that requires access to case
folding info.
The Linux NFS community has a growing interest in supporting NFS
clients on Windows and MacOS platforms, where file name behavior does
not align with traditional POSIX semantics.
One example of a Windows-based NFS client is [1]. This client
implementation explicitly requires servers to report
FATTR4_WORD0_CASE_INSENSITIVE = TRUE for proper operation, a hard
requirement for Windows client interoperability because Windows
applications expect case-insensitive behavior. When an NFS client
knows the server is case-insensitive, it can avoid issuing multiple
LOOKUP/READDIR requests to search for case variants, and applications
like Win32 programs work correctly without manual workarounds or
code changes.
Even the Linux client can take advantage of this information. Trond
merged patches 4 years ago [2] that introduce support for case
insensitivity, in support of the Hammerspace NFS server. In
particular, when a client detects a case-insensitive NFS share,
negative dentry caching must be disabled (a lookup for "FILE.TXT"
failing shouldn't cache a negative entry when "file.txt" exists)
and directory change invalidation must clear all cached case-folded
file name variants.
Hammerspace servers and several other NFS server implementations
operate in multi-protocol environments, where a single file service
instance caters to both NFS and SMB clients. In those cases, things
work more smoothly for everyone when the NFS client can see and adapt
to the case folding behavior that SMB users rely on and expect. NFSD
needs to support the case-insensitivity and case-nonpreserving
booleans properly in order to participate as a first-class citizen
in such environments.
[1] https://github.com/kofemann/ms-nfs41-client
[2] https://patchwork.kernel.org/project/linux-nfs/cover/20211217203658.439352-1-trondmy@kernel.org/
* patches from https://patch.msgid.link/20260507-case-sensitivity-v14-0-e62cc8200435@oracle.com:
ksmbd: Report filesystem case sensitivity via FS_ATTRIBUTE_INFORMATION
nfsd: Implement NFSv4 FATTR4_CASE_INSENSITIVE and FATTR4_CASE_PRESERVING
nfsd: Report export case-folding via NFSv3 PATHCONF
isofs: Implement fileattr_get for case sensitivity
vboxsf: Implement fileattr_get for case sensitivity
nfs: Implement fileattr_get for case sensitivity
cifs: Implement fileattr_get for case sensitivity
xfs: Report case sensitivity in fileattr_get
hfsplus: Report case sensitivity in fileattr_get
hfs: Implement fileattr_get for case sensitivity
ntfs3: Implement fileattr_get for case sensitivity
exfat: Implement fileattr_get for case sensitivity
fat: Implement fileattr_get for case sensitivity
fs: Add case sensitivity flags to file_kattr
fs: Move file_kattr initialization to callers
Link: https://patch.msgid.link/20260507-case-sensitivity-v14-0-e62cc8200435@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
FS_ATTRIBUTE_INFORMATION responses have always reported
FILE_CASE_SENSITIVE_SEARCH and FILE_CASE_PRESERVED_NAMES
unconditionally. Case-insensitive filesystems like exFAT, and
casefolded directories on ext4 or f2fs, have no way to signal
their actual semantics to SMB clients.
Now that filesystems expose case behavior through ->fileattr_get,
query it via vfs_fileattr_get() and translate the FS_XFLAG_CASEFOLD
and FS_XFLAG_CASENONPRESERVING flags into the corresponding SMB
attributes. Filesystems without ->fileattr_get continue reporting
default POSIX behavior (case-sensitive, case-preserving).
SMB's FS_ATTRIBUTE_INFORMATION reports per-share attributes from
the share root, not per-file. Shares mixing casefold and
non-casefold directories report the root directory's behavior.
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Roland Mainz <roland.mainz@nrubsig.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260507-case-sensitivity-v14-15-e62cc8200435@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
NFSD currently provides NFSv4 clients with hard-coded responses
indicating all exported filesystems are case-sensitive and
case-preserving. This is incorrect for case-insensitive filesystems
and ext4 directories with casefold enabled.
Query the underlying filesystem's actual case sensitivity via
nfsd_get_case_info() and return accurate values to clients. This
supports per-directory settings for filesystems that allow mixing
case-sensitive and case-insensitive directories within an export.
The helper queries the parent dentry for non-directory filehandles
because case-folding is a per-directory property. That resolution
has the same corner cases here as for NFSv3 PATHCONF: single-file
exports query an unexported parent, disconnected dentries report
defaults until reconnected, and hardlinked files track whichever
alias the dcache currently holds.
Reviewed-by: Roland Mainz <roland.mainz@nrubsig.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260507-case-sensitivity-v14-14-e62cc8200435@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
The hard-coded MSDOS_SUPER_MAGIC check in nfsd3_proc_pathconf()
only recognizes FAT filesystems as case-insensitive. Modern
filesystems like F2FS, exFAT, and CIFS support case-insensitive
directories, but NFSv3 clients cannot discover this capability.
Query the export's actual case behavior through ->fileattr_get
instead. This allows NFSv3 clients to correctly handle case
sensitivity for any filesystem that implements the fileattr
interface. Filesystems without ->fileattr_get continue to report
the default POSIX behavior (case-sensitive, case-preserving).
This change depends on the earlier "fat: Implement fileattr_get
for case sensitivity" patch in this series, which ensures FAT
filesystems report their case behavior correctly via the
fileattr interface.
Case-folding is a per-directory property, so
nfsd_get_case_info() queries the parent dentry for
non-directory filehandles. Three inherent corner cases follow:
a single-file export's parent lies outside the exported
subtree, so the LSM hook evaluates against an unexported
directory; a disconnected dentry from fh_verify() has
d_parent == itself, so the file's own attributes are reported
until the dentry connects; and a hardlinked file resolves
through the alias the dcache currently holds, so when the
inode is linked into both case-folded and case-sensitive
directories the reported value tracks whichever parent is
active. These limitations are not addressable without
redefining the protocol attribute as per-parent rather than
per-object.
RFC 1813 restricts PATHCONF errors to NFS3ERR_STALE,
NFS3ERR_BADHANDLE, and NFS3ERR_SERVERFAULT. When an LSM hook
denies the case-folding query on the parent, NFS3ERR_STALE is
the only correct mapping: NFS3ERR_SERVERFAULT misrepresents a
working server as broken, and NFS3ERR_BADHANDLE implies a
decoding failure that did not occur. A client purging the
filehandle on receipt is the desired outcome, since the server
has refused to read attributes through it. Substituting POSIX
defaults instead would let the same handle report
casefold=false now and casefold=true once policy permits,
opening a silent name-collision window on case-insensitive
exports.
Reviewed-by: Roland Mainz <roland.mainz@nrubsig.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260507-case-sensitivity-v14-13-e62cc8200435@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Upper layers such as NFSD need a way to query whether a
filesystem handles filenames in a case-sensitive manner so
they can provide correct semantics to remote clients. Without
this information, NFS exports of ISO 9660 filesystems cannot
advertise their filename case behavior.
Implement isofs_fileattr_get() to report ISO 9660 case handling
behavior. The 'check=r' (relaxed) mount option enables
case-insensitive lookups and is reported via FS_XFLAG_CASEFOLD.
By default, Joliet extensions operate in relaxed mode while
plain ISO 9660 uses strict (case-sensitive) mode.
Plain ISO 9660 names on the medium are uppercase. When neither
Rock Ridge nor Joliet is in effect, the default 'map=n' option
(and 'map=a') routes lookup and readdir through
isofs_name_translate(), which forces A-Z to a-z. The names
visible to userspace then differ in case from the on-disc form,
so report FS_XFLAG_CASENONPRESERVING in that configuration. Rock
Ridge and Joliet both deliver names as authored, and 'map=o'
emits the raw on-disc name unchanged, so those configurations
remain case-preserving.
Casefolding is a directory property, and the in-tree consumers
(NFSD, ksmbd) issue the query against a directory: NFSD walks
to the parent for non-directory dentries before calling
vfs_fileattr_get(), and ksmbd reports per-share attributes from
the share root. Wire .fileattr_get only on
isofs_dir_inode_operations. The CASEFOLD flag is set in both
fa->fsx_xflags and fa->flags so FS_IOC_FSGETXATTR and
FS_IOC_GETFLAGS agree.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Roland Mainz <roland.mainz@nrubsig.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260507-case-sensitivity-v14-12-e62cc8200435@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Upper layers such as NFSD need a way to query whether a
filesystem handles filenames in a case-sensitive manner. Report
VirtualBox shared folder case handling behavior via the
FS_XFLAG_CASEFOLD flag.
The case sensitivity property is queried from the VirtualBox host
service at mount time and cached in struct vboxsf_sbi. The host
determines case sensitivity based on the underlying host filesystem
(for example, Windows NTFS is case-insensitive while Linux ext4 is
case-sensitive).
VirtualBox shared folders always preserve filename case exactly
as provided by the guest. The host interface does not expose a
separate case-preserving property; leaving
FS_XFLAG_CASENONPRESERVING unset reports the POSIX-default
case-preserving behavior, which matches vboxsf semantics.
The callback is registered in all three inode_operations
structures (directory, file, and symlink) to ensure consistent
reporting across all inode types.
Reviewed-by: Roland Mainz <roland.mainz@nrubsig.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260507-case-sensitivity-v14-11-e62cc8200435@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
An NFS server re-exporting an NFS mount point needs to report
the case sensitivity behavior of the underlying filesystem to
its clients. NFSD's attribute encoder obtains that information
by calling vfs_fileattr_get() on the lower filesystem, so the
NFS client must implement fileattr_get to surface what it
learned from its own server.
The NFS client already retrieves case sensitivity information
from servers during mount via PATHCONF (NFSv3) or the
FATTR4_CASE_INSENSITIVE/FATTR4_CASE_PRESERVING attributes
(NFSv4). Expose this information through fileattr_get by
reporting the FS_XFLAG_CASEFOLD and FS_XFLAG_CASENONPRESERVING
flags. NFSv2 lacks PATHCONF support, so mounts using that protocol
version default to standard POSIX behavior: case-sensitive and
case-preserving.
PATHCONF is now invoked unconditionally for NFSv2 and NFSv3 mounts
so the case-sensitivity capabilities are established even when the
user pins server->namelen with the namlen= mount option. That option
is orthogonal to case handling, and skipping PATHCONF because
namelen was already known would leave the caps unset.
The two capability bits carry opposite polarity because their POSIX
defaults differ. Most servers are case-sensitive and case-
preserving, matching "neither xflag set." NFS_CAP_CASE_INSENSITIVE
is set only when the server affirms case insensitivity, so "server
said no" and "server did not answer" both collapse to the case-
sensitive default. NFS_CAP_CASE_NONPRESERVING follows the same
pattern in the opposite direction: set only when the server affirms
that it does not preserve case, so that silence or a missing
attribute lands on the case-preserving default. The NFSv4 probe
checks res.attr_bitmask[0] to distinguish "server said false" from
"server omitted the attribute" before setting the bit.
Both capability bits are cleared before each probe so a remount,
an NFSv4 transparent state migration to a server with different
case semantics, or a probe whose reply does not arrive does not
retain stale capabilities from the prior probe.
Reviewed-by: Roland Mainz <roland.mainz@nrubsig.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260507-case-sensitivity-v14-10-e62cc8200435@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Upper layers such as NFSD need a way to query whether a filesystem
handles filenames in a case-sensitive manner. Report CIFS/SMB case
handling behavior via FS_XFLAG_CASEFOLD and
FS_XFLAG_CASENONPRESERVING.
The authoritative source is the server itself: at mount time CIFS
issues QueryFSInfo(FS_ATTRIBUTE_INFORMATION) and caches the reply
on the tcon. That reply carries FILE_CASE_SENSITIVE_SEARCH and
FILE_CASE_PRESERVED_NAMES, which reflect whatever case handling
the share actually implements after SMB3.1.1 POSIX extensions
negotiation. Translating those two bits into the VFS flags lets
cifs_fileattr_get report what the server advertises rather than
what the client was asked to pretend.
QueryFSInfo is best-effort; the mount completes even if the server
does not answer. MaxPathNameComponentLength is zero in that case
and is used as the "no reply received" sentinel. When no reply is
available, fall back to the nocase mount option so that the reported
behavior agrees with the dentry comparison operations installed on
the superblock.
The callback is registered on cifs_dir_inode_ops so that NFSD,
ksmbd, and other consumers querying case handling against a
directory get a definitive answer, and on cifs_file_inode_ops to
preserve FS_COMPR_FL reporting on regular files. cifs_set_ops()
also installs cifs_namespace_inode_operations on DFS referral
directories that carry IS_AUTOMOUNT; register the same callback
there so the answer does not depend on whether the directory is
a referral point.
Registering fileattr_get routes FS_IOC_GETFLAGS through
vfs_fileattr_get() and short-circuits the syscall's fallback to
cifs_ioctl(). That fallback invoked CIFSGetExtAttr() under
CONFIG_CIFS_POSIX and CONFIG_CIFS_ALLOW_INSECURE_LEGACY on servers
advertising CIFS_UNIX_EXTATTR_CAP, surfacing the SMB1 Unix-extension
immutable, append, and nodump bits. cifs_fileattr_get carries over
only FS_COMPR_FL from cached cifsAttrs; the SMB1 extattr fetch is
not reproduced. SMB1 is deprecated, and acquiring a netfid from
within a dentry-only callback is not worth preserving a path tied
to an insecure legacy dialect.
Acked-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Roland Mainz <roland.mainz@nrubsig.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260507-case-sensitivity-v14-9-e62cc8200435@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Upper layers such as NFSD need to query whether a filesystem
is case-sensitive. Add FS_XFLAG_CASEFOLD to xfs_ip2xflags()
when the filesystem is formatted with the ASCIICI feature
flag. This serves both FS_IOC_FSGETXATTR (via xfs_fill_fsxattr()
in xfs_fileattr_get()) and XFS_IOC_BULKSTAT (which populates
bs_xflags directly from xfs_ip2xflags()), so bulkstat consumers
and per-inode queries see a consistent view of the filesystem's
case-folding behavior.
FS_XFLAG_CASEFOLD is read-only: FS_XFLAG_RDONLY_MASK ensures
FS_IOC_FSSETXATTR strips it, and xfs_flags2diflags() has no
clause for CASEFOLD so the on-disk diflags are unaffected.
The legacy FS_IOC_SETFLAGS path in xfs_fileattr_set() also
allows FS_CASEFOLD_FL through its allowlist on ASCIICI
filesystems so that a chattr read-modify-write cycle does
not fail with EOPNOTSUPP.
XFS always preserves case. XFS is case-sensitive by default,
but supports ASCII case-insensitive lookups when formatted
with the ASCIICI feature flag.
Reviewed-by: Roland Mainz <roland.mainz@nrubsig.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260507-case-sensitivity-v14-8-e62cc8200435@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add case sensitivity reporting to the existing hfsplus_fileattr_get()
function via the FS_XFLAG_CASEFOLD flag. HFS+ always preserves case
at rest.
Case sensitivity depends on how the volume was formatted: HFSX
volumes may be either case-sensitive or case-insensitive, indicated
by the HFSPLUS_SB_CASEFOLD superblock flag.
FS_XFLAG_CASEFOLD is read-only: FS_XFLAG_RDONLY_MASK ensures
FS_IOC_FSSETXATTR strips it. The legacy FS_IOC_SETFLAGS path in
hfsplus_fileattr_set() also allows FS_CASEFOLD_FL through its
allowlist on case-insensitive volumes so that a chattr
read-modify-write cycle does not fail with EOPNOTSUPP.
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Reviewed-by: Roland Mainz <roland.mainz@nrubsig.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260507-case-sensitivity-v14-7-e62cc8200435@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Report HFS case sensitivity behavior via the FS_XFLAG_CASEFOLD
flag. HFS is always case-insensitive (using Mac OS Roman case
folding) and always preserves case at rest.
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Reviewed-by: Roland Mainz <roland.mainz@nrubsig.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260507-case-sensitivity-v14-6-e62cc8200435@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Report NTFS case sensitivity behavior via the FS_XFLAG_CASEFOLD
flag. NTFS always preserves case at rest.
Reviewed-by: Roland Mainz <roland.mainz@nrubsig.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260507-case-sensitivity-v14-5-e62cc8200435@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Report exFAT's case sensitivity behavior via the FS_XFLAG_CASEFOLD
flag. exFAT compares names through the volume's upcase table; in
practice that table folds case, and case is preserved at rest.
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Roland Mainz <roland.mainz@nrubsig.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://github.com/exfatprogs/exfatprogs/issues/313
Link: https://patch.msgid.link/20260507-case-sensitivity-v14-4-e62cc8200435@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Report FAT's case sensitivity behavior via the FS_XFLAG_CASEFOLD
and FS_XFLAG_CASENONPRESERVING flags. FAT filesystems are
case-insensitive by default.
MSDOS supports a 'nocase' mount option that enables case-sensitive
behavior; check this option when reporting case sensitivity.
VFAT long filename entries preserve case; without VFAT, only
uppercased 8.3 short names are stored. MSDOS with 'nocase' also
preserves case since the name-formatting code skips upcasing when
'nocase' is set. Check both options when reporting case preservation.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Roland Mainz <roland.mainz@nrubsig.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260507-case-sensitivity-v14-3-e62cc8200435@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
Enable upper layers such as NFSD to retrieve case sensitivity
information from file systems by adding FS_XFLAG_CASEFOLD and
FS_XFLAG_CASENONPRESERVING flags.
Filesystems report case-insensitive or case-nonpreserving behavior
by setting these flags directly in fa->fsx_xflags. The default
(flags unset) indicates POSIX semantics: case-sensitive and
case-preserving. Both flags are added to FS_XFLAG_RDONLY_MASK so
FS_IOC_FSSETXATTR silently strips them, keeping the new xflags
strictly a reporting interface. Callers that want to toggle
casefolding continue to use FS_IOC_SETFLAGS with FS_CASEFOLD_FL,
the established UAPI on filesystems that support the operation
(ext4 and f2fs on empty directories).
Case sensitivity information is exported to userspace via the
fa_xflags field in the FS_IOC_FSGETXATTR ioctl and file_getattr()
system call.
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Roland Mainz <roland.mainz@nrubsig.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260507-case-sensitivity-v14-2-e62cc8200435@oracle.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
fileattr_fill_xflags() and fileattr_fill_flags() memset the
entire file_kattr struct before populating select fields, so
callers cannot pre-set fields in fa->fsx_xflags without having
their values clobbered. Darrick Wong noted that a function
named "fill_xflags" touching more than xflags forces callers
to know implementation details beyond its apparent scope.
Drop the memset from both fill functions and initialize at the
entry points instead: ioctl_setflags(), ioctl_fssetxattr(),
the file_setattr() syscall, and xfs_ioc_fsgetxattra() now
declare fa with an aggregate initializer. ioctl_getflags(),
ioctl_fsgetxattr(), and the file_getattr() syscall already
aggregate-initialize fa to pass flags_valid/fsx_valid hints
into vfs_fileattr_get().
Subsequent patches rely on this so that ->fileattr_get()
handlers can set case-sensitivity flags (FS_XFLAG_CASEFOLD,
FS_XFLAG_CASENONPRESERVING) in fa->fsx_xflags before the fill
functions run.
Suggested-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Roland Mainz <roland.mainz@nrubsig.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://patch.msgid.link/20260507-case-sensitivity-v14-1-e62cc8200435@oracle.com
Reviewed-by: "Darrick J. Wong" <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
When using the fixed-emmc-driver-type device tree property, the MMC core
correctly selects the driver strength for the card but fails to program
the host controller accordingly. This causes a mismatch where the card
uses the specified driver type while the host controller defaults to
Type B (since ios->drv_type remains zero).
Split the driver type programming logic to handle both fixed and dynamic
driver type selection paths. For fixed driver types, program the host
controller with the selected drive_strength value. For dynamic selection,
use the existing drv_type as before.
This ensures both the eMMC device and host controller use matching driver
strengths, preventing potential signal integrity issues.
Fixes: 6186d06c51 ("mmc: parse new binding for eMMC fixed driver type")
Signed-off-by: Kamal Dasu <kamal.dasu@broadcom.com>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Cc: stable@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Problem determination using s390dbf logging sometimes requires changing
the default logging level or log area size. While this is possible
using sysfs interfaces, there is no easy way to adjust these parameters
for early boot code that emits logs before userspace is available.
Add an s390dbf kernel parameter to address this shortcoming. The
parameter can be used to specify log level and area size (in units of
pages). A level of '-' turns logging off for an area. Logs can be
identified by name or a shell-style pattern.
Parameter format:
s390dbf=<name|pattern>:[<level>|-]:[<pages>][,...]
Example:
s390dbf=cio*:6:128,sclp_err::2
Specified parameters are applied immediately during debug area
registration for regular log areas. For early, static debug areas,
log levels are changed during early_param() parsing, while size
changes are applied at arch_initcall-time.
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Tested-by: Vineeth Vijayan <vneethv@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Notify userspace about two important events on AP queues
when run within Secure Execution (SE) environment:
- Send AP CHANGE uevent with "SE_BIND=1" on successful bind
operation on this AP queue device.
- Send AP CHANGE uevent with "SE_ASSOC=<association_index>"
on successful association operation with the secret of the
reported index on this AP queue device.
Note there is no SE unbind/unassociate event. Unbind/unassociate
can have different triggers and technically there is no signaling
done which the AP code could catch. A user space application can,
if this information is crucial, query the sysfs attribute se_bind
on the AP queue which runs a synchronous TAPQ. If the attribute
returns with "unbound" a reset took place and SE bind and associate
states are unbound and unassociated.
Suggested-by: Marc Hartmayer mhartmay@linux.ibm.com
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Holger Dengler <dengler@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
/proc/irq/<n>/ directory names are built in `char name[10]` buffers
with `sprintf(name, "%u", irq)`.
Ten-digit IRQ numbers already need 11 bytes including the trailing NUL, and
current sparse-IRQ configurations allow interrupt numbers in that range.
Size the temporary name buffer for the current decimal form and switch
to bounded formatting when creating or removing the proc entry.
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Link: https://patch.msgid.link/20260404101001.1-genirq-proc-pengpeng@iscas.ac.cn
check_mft_mirror() still computes the number of bytes to validate in each
mirrored MFT record, but the actual comparison against $MFTMirr was dropped
when the superblock code was updated.
As a result, mount misses a stale or inconsistent $MFTMirr as long as both
records pass the structural baad-record checks. Restore the comparison and
log an error when the primary $MFT record differs from its mirror copy.
Returning false lets the existing mount error handling mark the volume as
having NTFS errors and, with on_errors=remount-ro, continue read-only. The
default on_errors=continue mount policy still allows the mount to proceed.
Fixes: 6251f0b0de ("ntfs: update super block operations")
Signed-off-by: DaeMyung Kang <charsyam@gmail.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
On PREEMPT_RT, non-HARD irq_work runs in per-CPU kthreads via
run_irq_workd(), so irq_work_sync() uses rcuwait() to wait for BUSY==0.
After irq_work_single() clears BUSY via atomic_cmpxchg(), it still
dereferences @work for irq_work_is_hard() and rcuwait_wake_up().
An irq_work_sync() caller on another CPU that enters after BUSY is cleared
can observe BUSY==0 immediately, return, and free the work before those
accesses complete — causing a use-after-free.
Fix this by wrapping run_irq_workd() in guard(rcu)() so that the entire
irq_work_single() execution is within an RCU read-side critical
section. Then add synchronize_rcu() in irq_work_sync() after
rcuwait_wait_event() to ensure the caller waits for the RCU grace period
before returning, preventing premature frees.
Fixes: 810979682c ("irq_work: Allow irq_work_sync() to sleep if irq_work() no IRQ support.")
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://patch.msgid.link/20260330073234.303732-1-jiayuan.chen@linux.dev
Exynos 7870 compatible controllers, such as SDIO ones are not able to
perform DMA transfers for small sizes of data (~16 to ~512 bytes),
resulting in cache issues in subsequent transfers. Increase the DMA
transfer threshold to 512 to allow the shorter transfers to take place,
bypassing DMA.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Some controllers, such as certain Exynos SDIO ones, are unable to
perform DMA transfers of small amount of bytes properly. Following the
device tree schema, implement the property to define the DMA transfer
threshold (from a hard coded value of 16 bytes) so that lesser number of
bytes can be transferred safely skipping DMA in such controllers. The
value of 16 bytes stays as the default for controllers which do not
define it. This value can be overridden by implementation-specific init
sequences.
Signed-off-by: Kaustabh Chakraborty <kauschluss@disroot.org>
Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Use the existing zenbook duo keyboard quirk for the UX8407AA model too.
Signed-off-by: Paolo Pisati <p.pisati@gmail.com>
Reviewed-by: Denis Benato <denis.benato@linux.dev>
Link: https://patch.msgid.link/20260508070956.62201-1-p.pisati@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Since Qualcomm inline-crypto engine (ICE) is now a dedicated driver
de-coupled from the QCOM UFS driver, it explicitly votes for its required
clocks during probe. For scenarios where the 'clk_ignore_unused' flag is
not passed on the kernel command line, to avoid potential unclocked ICE
hardware register access during probe the ICE driver should additionally
vote on the 'iface' clock.
Also update the suspend and resume callbacks to handle un-voting and voting
on the 'iface' clock.
Fixes: 2afbf43a4a ("soc: qcom: Make the Qualcomm UFS/SDCC ICE a dedicated driver")
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260416-qcom_ice_power_and_clk_vote-v5-2-5ccf5d7e2846@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The watchdog on the Apple silicon t8122 (M3) SoC is compatible with the
existing driver. Add "apple,t8122-wdt" as SoC specific compatible under
"apple,t8103-wdt" used by the driver.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Joshua Peisach <jpeisach@ubuntu.com>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Janne Grunau <j@jannau.net>
Link: https://lore.kernel.org/r/20260507-apple-m3-initial-devicetrees-v3-2-ca07c81b5dc7@jannau.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Introduce a CPUID parser for populating the system's CPUID tables.
Since accessing a leaf within the CPUID table requires compile time
tokenization, split the parser into two stages:
(a) Compile-time macros for tokenizing the leaf/subleaf offsets within
the CPUID table.
(b) Generic runtime code to fill the CPUID data, using a parsing table
which collects these compile-time offsets.
For actual CPUID output parsing, support both generic and leaf-specific
read functions.
To ensure CPUID data early availability, invoke the parser during early
boot, early Xen boot, and at early secondary CPUs bring up.
Provide call site APIs to refresh a single leaf, or a leaf range, within
the CPUID tables. This is for sites issuing MSR writes that partially
change the CPU's CPUID layout. Doing full CPUID table rescans in such
cases will be destructive since the CPUID tables will host all of the
kernel's X86_FEATURE flags at a later stage.
Suggested-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/all/20260327021645.555257-1-darwi@linutronix.de
The DT bindings for inline-crypto engine do not specify the UFS_PHY_GDSC
power-domain and iface clock. Without enabling the iface clock and the
associated power-domain the ICE hardware cannot function correctly and
leads to unclocked hardware accesses being observed during probe.
Fix the DT bindings for inline-crypto engine to require the UFS_PHY_GDSC
power-domain and iface clock for new devices (Eliza and Milos) introduced
in the current release (7.1) with yet-to-stabilize ABI, while preserving
backward compatibility for older devices.
Fixes: 618195a7ac ("dt-bindings: crypto: qcom,inline-crypto-engine: Document the Eliza ICE")
Fixes: 85faec1e85 ("dt-bindings: crypto: qcom,inline-crypto-engine: document the Milos ICE")
Reviewed-by: Kuldeep Singh <kuldeep.singh@oss.qualcomm.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Harshal Dev <harshal.dev@oss.qualcomm.com>
Link: https://lore.kernel.org/r/20260416-qcom_ice_power_and_clk_vote-v5-1-5ccf5d7e2846@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Machines with a larger number of CPUs and under heavy load sometimes
loose PAI counter increments during recording using events
-e CRYPTO_ÂLL or -e NNPA_ALL. Counting is not affected.
This happens when several PAI crypto counters are incremented during
the same cryptographic operation.
During schedule out the functions
paiXXX_sched_task() (with XXX either crypt or ext)
+--> pai_have_samples()
+--> pai_have_sample()
+--> pai_copy()
+--> pai_push_sample()
are called to read out PAI counter values.
In pai_copy() the current values of PAI counters are read from the
PMU memory mapped page and compared to the values read during last
schedule out operation, which have been saved in a backup page
named PAI_SAVE_AREA(event). For each PAI counter a delta is calculated
and when the delta is positive, that PAI counter was incremented by
hardware. This positve delta is reported as raw data record attached
to a sample.
After all deltas have been calculated, the new PAI counter values
are saved in the backup page PAI_SAVE_AREA(event). However this is
done in pai_push_sample(), leaving a small window for missing hardware
triggered updates. Here is one scenario:
PAI counter idx: 0 1 2 3 4 5 6 7 .... N
+---+---+---+---+---+---+---+---+ +---+
PAI counter page:| | | X | | | | | |....| Y |
+---+---+---+---+---+---+---+---+ +---+
In pai_copy() each PAI counter value is read and compared
to its old value. This is done in a loop. When PAI counter indexed
N is read, the hardware might increment PAI counter indexed 2 again,
updating its value from X to X+1.
Later pai_push_sample() simply mem-copies the complete PAI counter
page to a backup page and the increment of X+1 is lost, because the
backup page now contains the new value.
Read each PAI counter and save this value in the backup page when
there is a positive delta. This omits any time window between read
and store. This also reduced the work load as only modified PAI
counters are saved.
Cc: stable@vger.kernel.org
Fixes: fe861b0c8d ("s390/pai: save PAI counter value page in event structure")
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
When executing NS_GET_PID_FROM_PIDNS (or similar pidns ioctls), if the
target task cannot be found in the corresponding pid_ns, the error code
should be ESRCH instead of ENOTTY.
This bug was introduced when the extensible ioctl handling was added.
Without proper return, ret would be overwritten by the default case in
the extensible ioctl switch statement.
Fixes: a1d220d9da ("nsfs: iterate through mount namespaces")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Link: https://patch.msgid.link/20260507112301.1042757-1-chengzhihao1@huawei.com
Reviewed-by: Yang Erkun <yangerkun@huawei.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
blk_validate_limits() requires max_hw_sectors >= PAGE_SECTORS and fires
a WARN_ON_ONCE if this invariant is violated. ublk_validate_params()
only checked the upper bound of max_sectors against max_io_buf_bytes,
allowing userspace to pass small values (including zero) that trigger
the warning when blk_mq_alloc_disk() is called from
ublk_ctrl_start_dev().
Before 494ea040bc, ublk used blk_queue_max_hw_sectors() which silently
clamped small values up to PAGE_SECTORS. The conversion to passing
queue_limits directly to blk_mq_alloc_disk() lost that clamping and now
hits blk_validate_limits()'s WARN_ON_ONCE instead.
Validate that max_sectors is at least PAGE_SECTORS in
ublk_validate_params() so invalid values are rejected early with
-EINVAL instead of reaching the block layer.
Fixes: 494ea040bc ("ublk: pass queue_limits to blk_mq_alloc_disk")
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Link: https://patch.msgid.link/20260510144843.769031-1-tom.leiming@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
SQPOLL stores current->pid (init_pid_ns view) in sqd->task_pid
at thread creation. fdinfo prints it raw via
seq_printf("SqThread:\t%d\n", sq_pid). A reader inside a
non-initial pid_ns sees the host PID, not the kthread's PID in
the reader's own pid_ns.
The SQPOLL kthread is created with CLONE_THREAD and no
CLONE_NEW*, so it lives in the submitter's pid_ns. An
unprivileged user_ns + pid_ns submitter can read fdinfo and
learn the host PID of a kthread whose in-namespace PID is
different.
Reproducer (mainline 7.0, KASAN): unshare CLONE_NEWUSER |
CLONE_NEWPID | CLONE_NEWNS, mount a private /proc, then have a
grandchild that is pid 1 in the new pid_ns open an io_uring
ring with IORING_SETUP_SQPOLL. /proc/self/task lists {1, 2};
the SQPOLL kthread is pid 2. Before: fdinfo prints
SqThread = <host pid>. After: SqThread = 2.
Use task_pid_nr_ns() against the proc inode's pid_ns to compute
sq_pid, instead of reading the stored sq->task_pid (which holds
the init_pid_ns view). pidfd_show_fdinfo() in kernel/pid.c
follows the same pattern.
Signed-off-by: Maoyi Xie <maoyi.xie@ntu.edu.sg>
Link: https://patch.msgid.link/20260510084119.457578-1-maoyi.xie@ntu.edu.sg
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch prepares the iomap framework for exFAT's upcoming migration to
iomap. During testing of the exFAT iomap branch with xfstests generic/299 on
a VM with 8GB RAM and a 40GB disk, system unresponsiveness was observed.
iomap_zero_iter() lacked dirty page throttling, which could cause memory
pressure when exFAT's valid_size mechanism triggers large-scale zeroing
operations during writes beyond valid_size.
Align iomap_zero_iter() with iomap_write_iter() by adding
balance_dirty_pages_ratelimited() to throttle dirty page generation during
large zeroing operations
Signed-off-by: Chi Zhiling <chizhiling@kylinos.cn>
Link: https://patch.msgid.link/20260511094007.728011-1-chizhiling@163.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
When iomap_iter() finishes its iteration (returns <= 0), it is no longer
necessary to memset the entire iomap and srcmap structures.
In high-IOPS scenarios (like 4k randread NVMe polling with io_uring),
where the majority of I/Os complete in a single extent map, this wasted
memory write bandwidth, as the caller will just discard the iterator.
Use this command to test:
taskset -c 30 ./t/io_uring -p1 -d512 -b4096 -s32 -c32 -F1 -B1 -R1 -X1
-n1 -P1 /mnt/testfile
IOPS improve about 5% on ext4 and XFS.
However, we MUST still call iomap_iter_reset_iomap() to release the
folio_batch if IOMAP_F_FOLIO_BATCH is set, otherwise we leak page
references. Therefore, split the cleanup logic: always release the
folio_batch, but skip the memset() when ret <= 0.
Signed-off-by: Fengnan Chang <changfengnan@bytedance.com>
Link: https://patch.msgid.link/20260420061630.62077-1-changfengnan@bytedance.com
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Christian Brauner <brauner@kernel.org>
