[ Upstream commit 349b5bed53 ]
Networking resets in IPQ6018 all use bitmask as they require multiple
bits to be set and cleared instead of a single bit.
So, current networking resets have the same register and bit 0 set which
is clearly incorrect.
Fixes: d9db07f088 ("clk: qcom: Add ipq6018 Global Clock Controller support")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230526190855.2941291-2-robimarko@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2864e304fa ]
Adding the definition of decoder status to separate different decoder
period for core hardware.
core_work_cnt is the number of core work queued to work queue, the control
is very complex, leading to some unreasonable test result.
Using parameter status to indicate whether queue core work to work queue.
Fixes: 2e0ef56d81 ("media: mediatek: vcodec: making sure queue_work successfully")
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 04fc06f6dc ]
pm_runtime_get_if_in_use() does not only return nonzero values when
the device is in use, it can return a negative errno too.
And especially during resuming from system suspend, when runtime pm
is not yet up again, -EAGAIN is being returned, so the subsequent
pm_runtime_put() call results in a refcount underflow.
Fix system-resume by handling -EAGAIN of pm_runtime_get_if_in_use().
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Fixes: e8c0882685 ("media: i2c: add driver for the SK Hynix Hi-846 8M pixel camera")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59a9597963 ]
On R-Car M2-W:
rcar_fdp1 fe940000.fdp1: FDP1 Unidentifiable (0x02010101)
rcar_fdp1 fe944000.fdp1: FDP1 Unidentifiable (0x02010101)
Although the IP Internal Data Register on R-Car Gen2 is documented to
contain all zeros, the actual register contents seem to match the FDP1
version ID of R-Car H3 ES1.*, which has just been removed.
Fortunately this version is not used for any other purposes yet.
Fix this by re-adding the ID, now using an R-Car Gen2-specific name.
Fixes: af4273b43f ("media: renesas: fdp1: remove R-Car H3 ES1.* handling")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 306c3190b3 ]
Format propagation in the st-mipid02 driver is incorrect in that when
setting format for V4L2_SUBDEV_FORMAT_TRY on the source pad, the
_active_ rather than _try_ format from the sink pad is propagated.
This causes problems with format negotiation - update the function to
propagate the correct format.
Fixes: 642bb5e88f ("media: st-mipid02: MIPID02 CSI-2 to PARALLEL bridge driver")
Signed-off-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b3565dbc6 ]
The "& IMX296_TMDOUT_MASK" means that "tmdout" can't be negative so the
error checking will not work.
Fixes: cb33db2b6c ("media: i2c: IMX296 camera sensor driver")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f489a966f ]
The previous commit ebad8e731c ("media: usb: siano: Fix use after
free bugs caused by do_submit_urb") adds cancel_work_sync() in
smsusb_stop_streaming(). But smsusb_stop_streaming() may be called,
even if the work_struct surb->wq has not been initialized. As a result,
the warning will occur. One of the processes that could lead to warning
is shown below:
smsusb_probe()
smsusb_init_device()
if (!dev->in_ep || !dev->out_ep || align < 0) {
smsusb_term_device(intf);
smsusb_stop_streaming()
cancel_work_sync(&dev->surbs[i].wq);
__cancel_work_timer()
__flush_work()
if (WARN_ON(!work->func)) // work->func is null
The log reported by syzbot is shown below:
WARNING: CPU: 0 PID: 897 at kernel/workqueue.c:3066 __flush_work+0x798/0xa80 kernel/workqueue.c:3063
Modules linked in:
CPU: 0 PID: 897 Comm: kworker/0:2 Not tainted 6.2.0-rc1-syzkaller #0
RIP: 0010:__flush_work+0x798/0xa80 kernel/workqueue.c:3066
...
RSP: 0018:ffffc9000464ebf8 EFLAGS: 00010246
RAX: 1ffff11002dbb420 RBX: 0000000000000021 RCX: 1ffffffff204fa4e
RDX: dffffc0000000000 RSI: 0000000000000001 RDI: ffff888016dda0e8
RBP: ffffc9000464ed98 R08: 0000000000000001 R09: ffffffff90253b2f
R10: 0000000000000001 R11: 0000000000000000 R12: ffff888016dda0e8
R13: ffff888016dda0e8 R14: ffff888016dda100 R15: 0000000000000001
FS: 0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffd4331efe8 CR3: 000000000b48e000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__cancel_work_timer+0x315/0x460 kernel/workqueue.c:3160
smsusb_stop_streaming drivers/media/usb/siano/smsusb.c:182 [inline]
smsusb_term_device+0xda/0x2d0 drivers/media/usb/siano/smsusb.c:344
smsusb_init_device+0x400/0x9ce drivers/media/usb/siano/smsusb.c:419
smsusb_probe+0xbbd/0xc55 drivers/media/usb/siano/smsusb.c:567
...
This patch adds check before cancel_work_sync(). If surb->wq has not
been initialized, the cancel_work_sync() will not be executed.
Reported-by: syzbot+27b0b464864741b18b99@syzkaller.appspotmail.com
Fixes: ebad8e731c ("media: usb: siano: Fix use after free bugs caused by do_submit_urb")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26ae58f65e ]
VIDIOC_ENUMINPUT documentation describes the tuner field of
struct v4l2_input as index:
Documentation/userspace-api/media/v4l/vidioc-enuminput.rst
"
* - __u32
- ``tuner``
- Capture devices can have zero or more tuners (RF demodulators).
When the ``type`` is set to ``V4L2_INPUT_TYPE_TUNER`` this is an
RF connector and this field identifies the tuner. It corresponds
to struct :c:type:`v4l2_tuner` field ``index``. For
details on tuners see :ref:`tuner`.
"
Drivers I could find also use the 'tuner' field as an index, e.g.:
drivers/media/pci/bt8xx/bttv-driver.c bttv_enum_input()
drivers/media/usb/go7007/go7007-v4l2.c vidioc_enum_input()
However, the UAPI comment claims this field is 'enum v4l2_tuner_type':
include/uapi/linux/videodev2.h
This field being 'enum v4l2_tuner_type' is unlikely as it seems to be
never used that way in drivers, and documentation confirms it. It seem
this comment got in accidentally in the commit which this patch fixes.
Fix the UAPI comment to stop confusion.
This was pointed out by Dmitry while reviewing VIDIOC_ENUMINPUT
support for strace.
Fixes: 6016af82ea ("[media] v4l2: use __u32 rather than enums in ioctl() structs")
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 076b6289b2 ]
The last buffer from before the change must be marked
with the V4L2_BUF_FLAG_LAST flag,
similarly to the Drain sequence above.
initiate a drain of the capture queue in dynamic resolution change
Fixes: 6de8d628df ("media: amphion: add v4l2 m2m vpu decoder stateful driver")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f6375a2d1 ]
Use the intended pointer types for p_s32 and p_64 in the union of the
struct v4l2_ext_control.
Fixes: e77eb66342 ("videodev2.h: add p_s32 and p_s64 pointers")
Signed-off-by: Daniel Lundberg Pedersen <dlp@qtec.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2aa8ac6f9 ]
Commit in Fixes turned a BUG() into a "normal" memory allocation failure.
While at it, it introduced a memory leak.
So fix it.
Also update the comment on top of the function to reflect what has been
change by the commit in Fixes.
Fixes: 40e986c996 ("media: common: saa7146: replace BUG_ON by WARN_ON")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1d2ccc2cd ]
For format V4L2_PIX_FMT_VC1_ANNEX_G,
the separate codec data is required only once.
The repeated codec data may introduce some decoding error.
so drop the repeated codec data.
It's amphion vpu's limitation
Fixes: e670f5d672 ("media: amphion: only insert the first sequence startcode for vc1l format")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Tested-by: xiahong.bao <xiahong.bao@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 668ee1a3a1 ]
For format V4L2_PIX_FMT_VC1_ANNEX_L,
the codec data is replaced with startcode,
and then driver drop it, otherwise it may led to decoding error.
It's amphion vpu's limitation
Driver has dropped the first codec data,
but need to drop the repeated codec data too.
Fixes: e670f5d672 ("media: amphion: only insert the first sequence startcode for vc1l format")
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Tested-by: xiahong.bao <xiahong.bao@nxp.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fdaca63186 ]
If az6007_read() returns error, there is no sence to continue.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 3af2f4f15a ("[media] az6007: Change the az6007 read/write routine parameter")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e4d179532 ]
Camera titan top GDSC is a parent supply to all other camera GDSCs. Titan
top GDSC is required to be enabled before enabling any other camera GDSCs
and it should be disabled only after all other camera GDSCs are disabled.
Ensure this behavior by marking titan top GDSC as parent of all other
camera GDSCs.
Fixes: 15d09e830b ("clk: qcom: camcc: Add camera clock controller driver for SC7180")
Signed-off-by: Taniya Das <quic_tdas@quicinc.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230501142932.13049-1-quic_tdas@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 853c064b57 ]
After the internal discussions, it looks like this clock is managed by
RPM itself. Linux kernel should not touch it on its own, as this causes
disagreement with RPM. Shutting down this clock causes the OCMEM<->GPU
interface to stop working, resulting in GPU hangchecks/timeouts.
Fixes: d8b212014e ("clk: qcom: Add support for MSM8974's multimedia clock controller (MMCC)")
Suggested-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230508153319.2371645-1-dmitry.baryshkov@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1ff7aedcdc ]
Commit dd42ec8ea5 ("interconnect: qcom: rpm: Use _optional func for provider clocks")
relaxed the requirements around probing bus clocks. This was a decent
solution for making sure MSM8996 would still boot with old DTs, but
now that there's a proper fix in place that both old and new DTs
will be happy about, revert back to the safer variant of the
function.
Fixes: dd42ec8ea5 ("interconnect: qcom: rpm: Use _optional func for provider clocks")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230228-topic-qos-v8-7-ee696a2c15a9@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a12928e25 ]
In preparation for handling non-scaling clocks that we still have to
enable, rename num_clocks to more descriptive num_bus_clocks.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230228-topic-qos-v8-2-ee696a2c15a9@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Stable-dep-of: 1ff7aedcdc ("interconnect: qcom: rpm: Don't use clk_get_optional for bus clocks anymore")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9ab22c2bc ]
If serial8250_register_8250_port() fails, the SoC can hang as the
deferred PMQoS work will still run as is not flushed and removed.
Fixes: 61929cf016 ("tty: serial: Add 8250-core based omap driver")
Signed-off-by: Tony Lindgren <tony@atomide.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230508082014.23083-2-tony@atomide.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ada050c691 ]
dwc2_driver_probe() calls dwc2_lowlevel_hw_init() which deassert some reset
lines.
Should an error happen in dwc2_lowlevel_hw_init() after calling
reset_control_deassert() or in the probe after calling
dwc2_lowlevel_hw_init(), the reset lines remain deasserted.
Add some devm_add_action_or_reset() calls to re-assert the lines if needed.
Update the remove function accordingly.
This change is compile-tested only.
Fixes: 83f8da562f ("usb: dwc2: Add reset control to dwc2")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/c64537b5339342bd00f7c2152b8fc23792b9f95a.1683306479.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c024241d0 ]
Avoid extra 120ms delay during system resume.
The xHC controller may signal wake up to 120ms before showing which usb
device caused the wake on the xHC port registers.
The xhci driver therefore checks for port activity up to 120ms during
resume, making sure that the hub driver can see the port change, and
won't immediately runtime suspend back due to no port activity.
This is however only needed for runtime resume as system resume will
resume all child hubs and other child usb devices anyway.
Fixes: 253f588c70 ("xhci: Improve detection of device initiated wake signal.")
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230428140056.1318981-3-Basavaraj.Natikar@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f7d552071 ]
Currently, the pci_resume method has only a flag indicating whether the
system is resuming from hibernation. In order to handle all PM events like
AUTO_RESUME (runtime resume from device in D3), RESUME (system resume from
s2idle, S3 or S4 states) etc change the pci_resume method to handle all PM
events.
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20230428140056.1318981-2-Basavaraj.Natikar@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 1c024241d0 ("xhci: Improve the XHCI system resume time")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ab24b0486 ]
If the probe needs to be deferred, some resources still need to be
released. So branch to the error handling path instead of returning
directly.
Fixes: f41e1442ac ("cpufreq: tegra194: add OPP support and set bandwidth")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Sumit Gupta <sumitg@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc9d1f0cec ]
Addresses the following warning when building j2_defconfig:
arch/sh/kernel/cpu/sh2/probe.c: In function 'scan_cache':
arch/sh/kernel/cpu/sh2/probe.c:24:16: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
24 | j2_ccr_base = (u32 __iomem *)of_flat_dt_translate_address(node);
|
Fixes: 5a846abad0 ("sh: add support for J-Core J2 processor")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Rob Landley <rob@landley.net>
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20230503125746.331835-1-glaubitz@physik.fu-berlin.de
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7cd2e5f75b ]
If a file has FI_COMPRESS_RELEASED, all writes for it should not be
allowed.
Fixes: 5fdb322ff2 ("f2fs: add F2FS_IOC_DECOMPRESS_FILE and F2FS_IOC_COMPRESS_FILE")
Signed-off-by: Qi Han <hanqi@vivo.com>
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d41dab4c03 ]
As pointed out by Shazad [1], PMICs using a separate HLOS+PBS scheme
(so PMK8350 and newer) are expected to pass reboot mode data through SDAM,
as the reboot mode registers are absent in the HLOS reg space.
Limit the reboot-mode.yaml inclusion to PMICs without a separate PBS
region.
[1] https://lore.kernel.org/linux-arm-msm/12f13183-c381-25f7-459e-62e0c2b19498@quicinc.com/
Fixes: 03fccdc76d ("dt-bindings: power: reset: qcom-pon: Add new compatible "qcom,pmk8350-pon"")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83f3fcf96f ]
The __w1_remove_master_device() function calls:
list_del(&dev->w1_master_entry);
So presumably this can cause an endless loop.
Fixes: 7785925dd8 ("[PATCH] w1: cleanups.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dca5480ab7 ]
The commit 67b392f7b8 ("w1_therm: optimizing temperature read timings")
accidentially inverted the logic for lock handling of the bus mutex.
Before:
pullup -> release lock before sleep
no pullup -> release lock after sleep
After:
pullup -> release lock after sleep
no pullup -> release lock before sleep
This cause spurious measurements of 85 degree (powerup value) on the
Tarragon board with connected 1-w temperature sensor
(w1_therm.w1_strong_pull=0).
In the meantime a new feature for polling the conversion
completion has been integrated in these branches with
commit 021da53e65 ("w1: w1_therm: Add sysfs entries to control
conversion time and driver features"). But this feature isn't
available for parasite power mode, so handle this separately.
Link: https://lore.kernel.org/regressions/2023042645-attentive-amends-7b0b@gregkh/T/
Fixes: 67b392f7b8 ("w1_therm: optimizing temperature read timings")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/20230427112152.12313-1-stefan.wahren@i2se.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0303c9729a ]
Niklāvs reported a boot regression on an Alderlake machine and bisected it
to commit 9df9d2f047 ("init: Invoke arch_cpu_finalize_init() earlier").
By moving the invocation of arch_cpu_finalize_init() further down he
identified that efi_enter_virtual_mode() is the function which causes the
boot hang.
The main difference of the earlier invocation is that the boot CPU is
already fully initialized and mitigations and alternatives are applied.
But the only really interesting change turned out to be IBT, which is now
enabled before efi_enter_virtual_mode(). "ibt=off" on the kernel command
line cured the problem.
Inspection of the involved calls in efi_enter_virtual_mode() unearthed that
efi_set_virtual_address_map() is the only place in the kernel which invokes
an EFI call without the IBT safe wrapper. This went obviously unnoticed so
far as IBT was enabled later.
Use arch_efi_call_virt() instead of efi_call() to cure that.
Fixes: fe379fa4d1 ("x86/ibt: Disable IBT around firmware")
Fixes: 9df9d2f047 ("init: Invoke arch_cpu_finalize_init() earlier")
Reported-by: Niklāvs Koļesņikovs <pinkflames.linux@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217602
Link: https://lore.kernel.org/r/87jzvm12q0.ffs@tglx
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 893b24181b ]
The FFR is a predicate register which can vary between 16 and 256 bits
in size depending upon the configured vector length. When saving the
SVE state in streaming SVE mode, the FFR register is inaccessible and
so commit 9f58486657 ("arm64/sve: Make access to FFR optional") simply
clears the FFR field of the in-memory context structure. Unfortunately,
it achieves this using an unconditional 8-byte store and so if the SME
vector length is anything other than 64 bytes in size we will either
fail to clear the entire field or, worse, we will corrupt memory
immediately following the structure. This has led to intermittent kfence
splats in CI [1] and can trigger kmalloc Redzone corruption messages
when running the 'fp-stress' kselftest:
| =============================================================================
| BUG kmalloc-1k (Not tainted): kmalloc Redzone overwritten
| -----------------------------------------------------------------------------
|
| 0xffff000809bf1e22-0xffff000809bf1e27 @offset=7714. First byte 0x0 instead of 0xcc
| Allocated in do_sme_acc+0x9c/0x220 age=2613 cpu=1 pid=531
| __kmalloc+0x8c/0xcc
| do_sme_acc+0x9c/0x220
| ...
Replace the 8-byte store with a store of a predicate register which has
been zero-initialised with PFALSE, ensuring that the entire field is
cleared in memory.
[1] https://lore.kernel.org/r/CA+G9fYtU7HsV0R0dp4XEH5xXHSJFw8KyDf5VQrLLfMxWfxQkag@mail.gmail.com
Cc: Mark Brown <broonie@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Fixes: 9f58486657 ("arm64/sve: Make access to FFR optional")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Mark Brown <broonie@kernel.org>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Link: https://lore.kernel.org/r/20230628155605.22296-1-will@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9cedc58bdb ]
clang warns about a possible field overflow in a memcpy:
In file included from fs/smb/server/smb_common.c:7:
include/linux/fortify-string.h:583:4: error: call to '__write_overflow_field' declared with 'warning' attribute: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror,-Wattribute-warning]
__write_overflow_field(p_size_field, size);
It appears to interpret the "&out[baselen + 4]" as referring to a single
byte of the character array, while the equivalen "out + baselen + 4" is
seen as an offset into the array.
I don't see that kind of warning elsewhere, so just go with the simple
rework.
Fixes: e2f34481b2 ("cifsd: add server-side procedures for SMB3")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ae872de41 ]
When having two DFS root mounts that are connected to same namespace,
same mount options but different prefix paths, we can't really use the
shared @server->origin_fullpath when chasing DFS links in them.
Move the origin_fullpath field to cifs_tcon structure so when having
shared DFS root mounts with different prefix paths, and we need to
chase any DFS links, dfs_get_automount_devname() will pick up the
correct full path out of the @tcon that will be used for the new
mount.
Before patch
mount.cifs //dom/dfs/dir /mnt/1 -o ...
mount.cifs //dom/dfs /mnt/2 -o ...
# shared server, ses, tcon
# server: origin_fullpath=//dom/dfs/dir
# @server->origin_fullpath + '/dir/link1'
$ ls /mnt/2/dir/link1
ls: cannot open directory '/mnt/2/dir/link1': No such file or directory
After patch
mount.cifs //dom/dfs/dir /mnt/1 -o ...
mount.cifs //dom/dfs /mnt/2 -o ...
# shared server & ses
# tcon_1: origin_fullpath=//dom/dfs/dir
# tcon_2: origin_fullpath=//dom/dfs
# @tcon_2->origin_fullpath + '/dir/link1'
$ ls /mnt/2/dir/link1
dir0 dir1 dir10 dir3 dir5 dir6 dir7 dir9 target2_file.txt tsub
Fixes: 8e3554150d ("cifs: fix sharing of DFS connections")
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 326a8d04f1 ]
All the server credits and in-flight info is protected by req_lock.
Once the req_lock is held, and we've determined that we have enough
credits to continue, this lock cannot be dropped till we've made the
changes to credits and in-flight count.
However, we used to drop the lock in order to avoid deadlock with
the recent srv_lock. This could cause the checks already made to be
invalidated.
Fixed it by moving the server status check to before locking req_lock.
Fixes: d7d7a66aac ("cifs: avoid use of global locks for high contention data")
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33f736187d ]
In smb2_compound_op we have a possible use-after-free
which can cause hard to debug problems later on.
This was revealed during stress testing with KASAN enabled
kernel. Fixing it by moving the cfile free call to
a few lines below, after the usage.
Fixes: 76894f3e2f ("cifs: improve symlink handling for smb2+")
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e28a798c3 ]
Currently, the EFI stub will disable PCI DMA as the very last thing it
does before calling ExitBootServices(), to avoid interfering with the
firmware's normal operation as much as possible.
However, the stub will invoke DisconnectController() on all endpoints
downstream of the PCI bridges it disables, and this may affect the
layout of the EFI memory map, making it substantially more likely that
ExitBootServices() will fail the first time around, and that the EFI
memory map needs to be reloaded.
This, in turn, increases the likelihood that the slack space we
allocated is insufficient (and we can no longer allocate memory via boot
services after having called ExitBootServices() once), causing the
second call to GetMemoryMap (and therefore the boot) to fail. This makes
the PCI DMA disable feature a bit more fragile than it already is, so
let's make it more robust, by allocating the space for the EFI memory
map after disabling PCI DMA.
Fixes: 4444f8541d ("efi: Allow disabling PCI busmastering on bridges during boot")
Reported-by: Glenn Washburn <development@efficientek.com>
Acked-by: Matthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1240dabe8d ]
When CONFIG_MODULES is disabled for ARCH=um, 'make (bin)deb-pkg' fails
with an error like follows:
cp: cannot create regular file 'debian/linux-image/usr/lib/uml/modules/6.4.0-rc2+/System.map': No such file or directory
Remove the CONFIG_MODULES check completely so ${pdir}/usr/lib/uml/modules
will always be created and modules.builtin.(modinfo) will be installed
under it for ARCH=um.
Fixes: b611daae5e ("kbuild: deb-pkg: split image and debug objects staging out into functions")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4243afdb93 ]
Even for a non-modular kernel, the kernel builds modules.builtin and
modules.builtin.modinfo, with information about the built-in modules.
Tools such as initramfs-tools need these files to build a working
initramfs on some systems, such as those requiring firmware.
Now that `make modules_install` works even in non-modular kernels and
installs these files, unconditionally invoke it when building a Debian
package.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Stable-dep-of: 1240dabe8d ("kbuild: deb-pkg: remove the CONFIG_MODULES check in buildeb")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b46c5fa57c ]
The CXL spec (3.0, section 8.2.9.8.4) Lists Inject Poison and Clear
Poison as having the effects of "Immediate Data Change". Fix this in the
mock driver so that the command effect log is populated correctly.
Fixes: 371c16101e ("tools/testing/cxl: Mock the Inject Poison mailbox command")
Cc: Alison Schofield <alison.schofield@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Vishal Verma <vishal.l.verma@intel.com>
Link: https://lore.kernel.org/r/20230602-vv-fw_update-v4-2-c6265bd7343b@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit adfe19738b ]
Jonathan reports that failed attempts to reset a region (teardown its
HDM decoder configuration) mistakenly advance the state of the region
to "not committed". Revert to the previous state of the region on reset
failure so that the reset can be re-attempted.
Reported-by: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Closes: http://lore.kernel.org/r/20230316171441.0000205b@Huawei.com
Fixes: 176baefb2e ("cxl/hdm: Commit decoder state to hardware")
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168696507968.3590522.14484000711718573626.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ab47045ac ]
cxl_region_decode_reset() walks all the decoders associated with a given
region and disables them. Due to decoder ordering rules it is possible
that a switch in the topology notices that a given decoder can not be
shutdown before another region with a higher HPA is shutdown first. That
can leave the region in a partially committed state.
Capture that state in a new CXL_REGION_F_NEEDS_RESET flag and require
that a successful cxl_region_decode_reset() attempt must be completed
before cxl_region_probe() accepts the region.
This is a corollary for the bug that Jonathan identified in "CXL/region
: commit reset of out of order region appears to succeed." [1].
Cc: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Link: http://lore.kernel.org/r/20230316171441.0000205b@Huawei.com [1]
Fixes: 176baefb2e ("cxl/hdm: Commit decoder state to hardware")
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168696507423.3590522.16254212607926684429.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1257d098a ]
Vikram raised a concern with the theoretical case of a CPU sending
MemClnEvict to a device that is not prepared to receive. MemClnEvict is
a message that is sent after a CPU has taken ownership of a cacheline
from accelerator memory (HDM-DB). In the case of hotplug or HDM decoder
reconfiguration it is possible that the CPU is holding old contents for
a new device that has taken over the physical address range being cached
by the CPU.
To avoid this scenario, invalidate caches prior to tearing down an HDM
decoder configuration.
Now, this poses another problem that it is possible for something to
speculate into that space while the decode configuration is still up, so
to close that gap also invalidate prior to establish new contents behind
a given physical address range.
With this change the cache invalidation is now explicit and need not be
checked in cxl_region_probe(), and that obviates the need for
CXL_REGION_F_INCOHERENT.
Cc: Jonathan Cameron <Jonathan.Cameron@Huawei.com>
Fixes: d18bc74ace ("cxl/region: Manage CPU caches relative to DPA invalidation events")
Reported-by: Vikram Sethi <vsethi@nvidia.com>
Closes: http://lore.kernel.org/r/BYAPR12MB33364B5EB908BF7239BB996BBD53A@BYAPR12MB3336.namprd12.prod.outlook.com
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168696506886.3590522.4597053660991916591.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25a21fbb93 ]
With GCOV_PROFILE_ALL, Clang injects __llvm_gcov_* functions to each
object file, including the *.mod.o. As we filter out CC_FLAGS_CFI
for *.mod.o, the compiler won't generate type hashes for the
injected functions, and therefore indirectly calling them during
module loading trips indirect call checking.
Enabling CFI for *.mod.o isn't sufficient to fix this issue after
commit 0c3e806ec0 ("x86/cfi: Add boot time hash randomization"),
as *.mod.o aren't processed by objtool, which means any hashes
emitted there won't be randomized. Therefore, in addition to
disabling CFI for *.mod.o, also disable GCOV, as the object files
don't otherwise contain any executable code.
Fixes: cf68fffb66 ("add support for Clang CFI")
Reported-by: Joe Fradley <joefradley@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ddf56288ee ]
With GCOV_PROFILE_ALL, Clang injects __llvm_gcov_* functions to
each object file, and the functions are indirectly called during
boot. However, when code is injected to object files that are not
part of vmlinux.o, it's also not processed by objtool, which breaks
CFI hash randomization as the hashes in these files won't be
included in the .cfi_sites section and thus won't be randomized.
Similarly to commit 42633ed852 ("kbuild: Fix CFI hash
randomization with KASAN"), disable GCOV for .vmlinux.export.o and
init/version-timestamp.o to avoid emitting unnecessary functions to
object files that don't otherwise have executable code.
Fixes: 0c3e806ec0 ("x86/cfi: Add boot time hash randomization")
Reported-by: Joe Fradley <joefradley@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit fc80fc2d4e upstream.
After the listener svc_sock is freed, and before invoking svc_tcp_accept()
for the established child sock, there is a window that the newsock
retaining a freed listener svc_sock in sk_user_data which cloning from
parent. In the race window, if data is received on the newsock, we will
observe use-after-free report in svc_tcp_listen_data_ready().
Reproduce by two tasks:
1. while :; do rpc.nfsd 0 ; rpc.nfsd; done
2. while :; do echo "" | ncat -4 127.0.0.1 2049 ; done
KASAN report:
==================================================================
BUG: KASAN: slab-use-after-free in svc_tcp_listen_data_ready+0x1cf/0x1f0 [sunrpc]
Read of size 8 at addr ffff888139d96228 by task nc/102553
CPU: 7 PID: 102553 Comm: nc Not tainted 6.3.0+ #18
Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020
Call Trace:
<IRQ>
dump_stack_lvl+0x33/0x50
print_address_description.constprop.0+0x27/0x310
print_report+0x3e/0x70
kasan_report+0xae/0xe0
svc_tcp_listen_data_ready+0x1cf/0x1f0 [sunrpc]
tcp_data_queue+0x9f4/0x20e0
tcp_rcv_established+0x666/0x1f60
tcp_v4_do_rcv+0x51c/0x850
tcp_v4_rcv+0x23fc/0x2e80
ip_protocol_deliver_rcu+0x62/0x300
ip_local_deliver_finish+0x267/0x350
ip_local_deliver+0x18b/0x2d0
ip_rcv+0x2fb/0x370
__netif_receive_skb_one_core+0x166/0x1b0
process_backlog+0x24c/0x5e0
__napi_poll+0xa2/0x500
net_rx_action+0x854/0xc90
__do_softirq+0x1bb/0x5de
do_softirq+0xcb/0x100
</IRQ>
<TASK>
...
</TASK>
Allocated by task 102371:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
__kasan_kmalloc+0x7b/0x90
svc_setup_socket+0x52/0x4f0 [sunrpc]
svc_addsock+0x20d/0x400 [sunrpc]
__write_ports_addfd+0x209/0x390 [nfsd]
write_ports+0x239/0x2c0 [nfsd]
nfsctl_transaction_write+0xac/0x110 [nfsd]
vfs_write+0x1c3/0xae0
ksys_write+0xed/0x1c0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
Freed by task 102551:
kasan_save_stack+0x1e/0x40
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x50
__kasan_slab_free+0x106/0x190
__kmem_cache_free+0x133/0x270
svc_xprt_free+0x1e2/0x350 [sunrpc]
svc_xprt_destroy_all+0x25a/0x440 [sunrpc]
nfsd_put+0x125/0x240 [nfsd]
nfsd_svc+0x2cb/0x3c0 [nfsd]
write_threads+0x1ac/0x2a0 [nfsd]
nfsctl_transaction_write+0xac/0x110 [nfsd]
vfs_write+0x1c3/0xae0
ksys_write+0xed/0x1c0
do_syscall_64+0x38/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
Fix the UAF by simply doing nothing in svc_tcp_listen_data_ready()
if state != TCP_LISTEN, that will avoid dereferencing svsk for all
child socket.
Link: https://lore.kernel.org/lkml/20230507091131.23540-1-dinghui@sangfor.com.cn/
Fixes: fa9251afc3 ("SUNRPC: Call the default socket callbacks instead of open coding")
Signed-off-by: Ding Hui <dinghui@sangfor.com.cn>
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 39020d8abc upstream.
At balance_level(), instead of doing a BUG_ON() in case we fail to record
tree mod log operations, do a transaction abort and return the error to
the callers. There's really no need for the BUG_ON() as we can release
all resources in this context, and we have to abort because other future
tree searches that use the tree mod log (btrfs_search_old_slot()) may get
inconsistent results if other operations modify the tree after that
failure and before the tree mod log based search.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
