[ Upstream commit 843794bbde ]
Experimentally, it looks like when QSYS_QMAXSDU_CFG_7 is set to 605,
frames even way larger than 601 octets are transmitted even though these
should be considered as oversized, according to the documentation, and
dropped.
Since oversized frame dropping depends on frame size, which is only
known at the EOF stage, and therefore not at SOF when cut-through
forwarding begins, it means that the switch cannot take QSYS_QMAXSDU_CFG_*
into consideration for traffic classes that are cut-through.
Since cut-through forwarding has no UAPI to control it, and the driver
enables it based on the mantra "if we can, then why not", the strategy
is to alter vsc9959_cut_through_fwd() to take into consideration which
tc's have oversize frame dropping enabled, and disable cut-through for
them. Then, from vsc9959_tas_guard_bands_update(), we re-trigger the
cut-through determination process.
There are 2 strategies for vsc9959_cut_through_fwd() to determine
whether a tc has oversized dropping enabled or not. One is to keep a bit
mask of traffic classes per port, and the other is to read back from the
hardware registers (a non-zero value of QSYS_QMAXSDU_CFG_* means the
feature is enabled). We choose reading back from registers, because
struct ocelot_port is shared with drivers (ocelot, seville) that don't
support either cut-through nor tc-taprio, and we don't have a felix
specific extension of struct ocelot_port. Furthermore, reading registers
from the Felix hardware is quite cheap, since they are memory-mapped.
Fixes: 55a515b1f5 ("net: dsa: felix: drop oversized frames with tc-taprio instead of hanging the port")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcb23bbb1d ]
When a QP and a MR on a local host are in different PDs, the HW generates
an asynchronous event (AE). The same AE is generated when a QP and a MW
are in different PDs during a bind operation. Return the more appropriate
IBV_WC_MW_BIND_ERR for the latter case by checking the OP type from the
CQE in error.
Fixes: 551c46edc7 ("RDMA/irdma: Add user/kernel shared libraries")
Signed-off-by: Sindhu-Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20220906223244.1119-4-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b227bd32d ]
The MR deregister CQP can fail if an MW is bound to it.
Return an appropriate error for this case.
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Signed-off-by: Sindhu-Devale <sindhu.devale@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/20220906223244.1119-3-shiraz.saleem@intel.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7e97872a6 ]
Maximum Active Resources (MAR) and Maximum Open Resources (MOR) are 0's
based vales where a value of 0xffffffff indicates that there is no limit.
Decrement the values that are returned by bdev_max_open_zones and
bdev_max_active_zones as the block layer helpers are not 0's based.
A 0 returned by the block layer helpers indicates no limit, thus convert
it to 0xffffffff (U32_MAX).
Fixes: aaf2e048af ("nvmet: add ZBD over ZNS backend support")
Suggested-by: Niklas Cassel <niklas.cassel@wdc.com>
Signed-off-by: Dennis Maisenbacher <dennis.maisenbacher@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5da431b71d ]
[BEHAVIOR CHANGE]
Since commit f6fca3917b ("btrfs: store chunk size in space-info
struct"), btrfs no longer can create larger data chunks than 1G:
mkfs.btrfs -f -m raid1 -d raid0 $dev1 $dev2 $dev3 $dev4
mount $dev1 $mnt
btrfs balance start --full $mnt
btrfs balance start --full $mnt
umount $mnt
btrfs ins dump-tree -t chunk $dev1 | grep "DATA|RAID0" -C 2
Before that offending commit, what we got is a 4G data chunk:
item 6 key (FIRST_CHUNK_TREE CHUNK_ITEM 9492758528) itemoff 15491 itemsize 176
length 4294967296 owner 2 stripe_len 65536 type DATA|RAID0
io_align 65536 io_width 65536 sector_size 4096
num_stripes 4 sub_stripes 1
Now what we got is only 1G data chunk:
item 6 key (FIRST_CHUNK_TREE CHUNK_ITEM 6271533056) itemoff 15491 itemsize 176
length 1073741824 owner 2 stripe_len 65536 type DATA|RAID0
io_align 65536 io_width 65536 sector_size 4096
num_stripes 4 sub_stripes 1
This will increase the number of data chunks by the number of devices,
not only increase system chunk usage, but also greatly increase mount
time.
Without a proper reason, we should not change the max chunk size.
[CAUSE]
Previously, we set max data chunk size to 10G, while max data stripe
length to 1G.
Commit f6fca3917b ("btrfs: store chunk size in space-info struct")
completely ignored the 10G limit, but use 1G max stripe limit instead,
causing above shrink in max data chunk size.
[FIX]
Fix the max data chunk size to 10G, and in decide_stripe_size_regular()
we limit stripe_size to 1G manually.
This should only affect data chunks, as for metadata chunks we always
set the max stripe size the same as max chunk size (256M or 1G
depending on fs size).
Now the same script result the same old result:
item 6 key (FIRST_CHUNK_TREE CHUNK_ITEM 9492758528) itemoff 15491 itemsize 176
length 4294967296 owner 2 stripe_len 65536 type DATA|RAID0
io_align 65536 io_width 65536 sector_size 4096
num_stripes 4 sub_stripes 1
Reported-by: Wang Yugui <wangyugui@e16-tech.com>
Fixes: f6fca3917b ("btrfs: store chunk size in space-info struct")
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 686dc2db2a ]
Fix a bug reported and analyzed by Nagaraj Arankal, where the handling
of a spurious non-SACK RTO could cause a connection to fail to clear
retrans_stamp, causing a later RTO to very prematurely time out the
connection with ETIMEDOUT.
Here is the buggy scenario, expanding upon Nagaraj Arankal's excellent
report:
(*1) Send one data packet on a non-SACK connection
(*2) Because no ACK packet is received, the packet is retransmitted
and we enter CA_Loss; but this retransmission is spurious.
(*3) The ACK for the original data is received. The transmitted packet
is acknowledged. The TCP timestamp is before the retrans_stamp,
so tcp_may_undo() returns true, and tcp_try_undo_loss() returns
true without changing state to Open (because tcp_is_sack() is
false), and tcp_process_loss() returns without calling
tcp_try_undo_recovery(). Normally after undoing a CA_Loss
episode, tcp_fastretrans_alert() would see that the connection
has returned to CA_Open and fall through and call
tcp_try_to_open(), which would set retrans_stamp to 0. However,
for non-SACK connections we hold the connection in CA_Loss, so do
not fall through to call tcp_try_to_open() and do not set
retrans_stamp to 0. So retrans_stamp is (erroneously) still
non-zero.
At this point the first "retransmission event" has passed and
been recovered from. Any future retransmission is a completely
new "event". However, retrans_stamp is erroneously still
set. (And we are still in CA_Loss, which is correct.)
(*4) After 16 minutes (to correspond with tcp_retries2=15), a new data
packet is sent. Note: No data is transmitted between (*3) and
(*4) and we disabled keep alives.
The socket's timeout SHOULD be calculated from this point in
time, but instead it's calculated from the prior "event" 16
minutes ago (step (*2)).
(*5) Because no ACK packet is received, the packet is retransmitted.
(*6) At the time of the 2nd retransmission, the socket returns
ETIMEDOUT, prematurely, because retrans_stamp is (erroneously)
too far in the past (set at the time of (*2)).
This commit fixes this bug by ensuring that we reuse in
tcp_try_undo_loss() the same careful logic for non-SACK connections
that we have in tcp_try_undo_recovery(). To avoid duplicating logic,
we factor out that logic into a new
tcp_is_non_sack_preventing_reopen() helper and call that helper from
both undo functions.
Fixes: da34ac7626 ("tcp: only undo on partial ACKs in CA_Loss")
Reported-by: Nagaraj Arankal <nagaraj.p.arankal@hpe.com>
Link: https://lore.kernel.org/all/SJ0PR84MB1847BE6C24D274C46A1B9B0EB27A9@SJ0PR84MB1847.NAMPRD84.PROD.OUTLOOK.COM/
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220903121023.866900-1-ncardwell.kernel@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3770a42bb8 ]
When we queue requests, we strive to batch as much as possible and also
signal the network stack that more data is about to be sent over a socket
with MSG_SENDPAGE_NOTLAST. This flag looks at the pending requests queued
as well as queue->more_requests that is derived from the block layer
last-in-batch indication.
We set more_request=true when we flush the request directly from
.queue_rq submission context (in nvme_tcp_send_all), however this is
wrongly assuming that no other requests may be queued during the
execution of nvme_tcp_send_all.
Due to this, a race condition may happen where:
1. request X is queued as !last-in-batch
2. request X submission context calls nvme_tcp_send_all directly
3. nvme_tcp_send_all is preempted and schedules to a different cpu
4. request Y is queued as last-in-batch
5. nvme_tcp_send_all context sends request X+Y, however signals for
both MSG_SENDPAGE_NOTLAST because queue->more_requests=true.
==> none of the requests is pushed down to the wire as the network
stack is waiting for more data, both requests timeout.
To fix this, we eliminate queue->more_requests and only rely on
the queue req_list and send_list to be not-empty.
Fixes: 122e5b9f3d ("nvme-tcp: optimize network stack with setting msg flags according to batch size")
Reported-by: Jonathan Nicklin <jnicklin@blockbridge.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Tested-by: Jonathan Nicklin <jnicklin@blockbridge.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 160f3549a9 ]
We should also bail from the io_work loop when we set rd_enabled to true,
so we don't attempt to read data from the socket when the TCP stream is
already out-of-sync or corrupted.
Fixes: 3f2304f8c6 ("nvme-tcp: add NVMe over TCP host driver")
Reported-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2f44013e39 ]
During stress testing with CONFIG_SMP disabled, KASAN reports as below:
==================================================================
BUG: KASAN: use-after-free in __mutex_lock+0xe5/0xc30
Read of size 8 at addr ffff8881094223f8 by task stress/7789
CPU: 0 PID: 7789 Comm: stress Not tainted 6.0.0-rc1-00002-g0d53d2e882f9 #3
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Call Trace:
<TASK>
..
__mutex_lock+0xe5/0xc30
..
z_erofs_do_read_page+0x8ce/0x1560
..
z_erofs_readahead+0x31c/0x580
..
Freed by task 7787
kasan_save_stack+0x1e/0x40
kasan_set_track+0x20/0x30
kasan_set_free_info+0x20/0x40
__kasan_slab_free+0x10c/0x190
kmem_cache_free+0xed/0x380
rcu_core+0x3d5/0xc90
__do_softirq+0x12d/0x389
Last potentially related work creation:
kasan_save_stack+0x1e/0x40
__kasan_record_aux_stack+0x97/0xb0
call_rcu+0x3d/0x3f0
erofs_shrink_workstation+0x11f/0x210
erofs_shrink_scan+0xdc/0x170
shrink_slab.constprop.0+0x296/0x530
drop_slab+0x1c/0x70
drop_caches_sysctl_handler+0x70/0x80
proc_sys_call_handler+0x20a/0x2f0
vfs_write+0x555/0x6c0
ksys_write+0xbe/0x160
do_syscall_64+0x3b/0x90
The root cause is that erofs_workgroup_unfreeze() doesn't reset to
orig_val thus it causes a race that the pcluster reuses unexpectedly
before freeing.
Since UP platforms are quite rare now, such path becomes unnecessary.
Let's drop such specific-designed path directly instead.
Fixes: 73f5c66df3 ("staging: erofs: fix `erofs_workgroup_{try_to_freeze, unfreeze}'")
Reviewed-by: Yue Hu <huyue2@coolpad.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20220902045710.109530-1-hsiangkao@linux.alibaba.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5bd9628b78 ]
If erofs_fscache_alloc_request fail and then goto out, it will return 0.
it should return a negative error code instead of 0.
Fixes: d435d53228 ("erofs: change to use asynchronous io for fscache readpage/readahead")
Signed-off-by: Sun Ke <sunke32@huawei.com>
Reviewed-by: Jingbo Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Link: https://lore.kernel.org/r/20220815034829.3940803-1-sunke32@huawei.com
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ca64ac276 ]
Since commit 6a921de589 ("btrfs: zoned: introduce
space_info->active_total_bytes"), we're only counting the bytes of a
block group on an active zone as usable for metadata writes. But on a
SMR drive, we don't have active zones and short circuit some of the
logic.
This leads to an error on mount, because we cannot reserve space for
metadata writes.
Fix this by also setting the BLOCK_GROUP_FLAG_ZONE_IS_ACTIVE bit in the
block-group's runtime flag if the zone is a conventional zone.
Fixes: 6a921de589 ("btrfs: zoned: introduce space_info->active_total_bytes")
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 74b30b3ad5 ]
When accessing Ports Performance Counters Register (PPCNT),
local port must be one if it is Function-Per-Port HCA that
HCA_CAP.num_ports is 1.
The offending patch can change the local port to other values
when accessing PPCNT after enabling switchdev mode. The following
syndrome will be printed:
# cat /sys/class/infiniband/rdmap4s0f0/ports/2/counters/*
# dmesg
mlx5_core 0000:04:00.0: mlx5_cmd_check:756:(pid 12450): ACCESS_REG(0x805) op_mod(0x1) failed, status bad parameter(0x3), syndrome (0x1e5585)
Fix it by setting local port to one for Function-Per-Port HCA.
Fixes: 210b1f7807 ("IB/mlx5: When not in dual port RoCE mode, use provided port as native")
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Chris Mi <cmi@nvidia.com>
Link: https://lore.kernel.org/r/6c5086c295c76211169e58dbd610fb0402360bab.1661763459.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85eaeb5058 ]
Fix a nested dead lock as part of ODP flow by using mmput_async().
From the below call trace [1] can see that calling mmput() once we have
the umem_odp->umem_mutex locked as required by
ib_umem_odp_map_dma_and_lock() might trigger in the same task the
exit_mmap()->__mmu_notifier_release()->mlx5_ib_invalidate_range() which
may dead lock when trying to lock the same mutex.
Moving to use mmput_async() will solve the problem as the above
exit_mmap() flow will be called in other task and will be executed once
the lock will be available.
[1]
[64843.077665] task:kworker/u133:2 state:D stack: 0 pid:80906 ppid:
2 flags:0x00004000
[64843.077672] Workqueue: mlx5_ib_page_fault mlx5_ib_eqe_pf_action [mlx5_ib]
[64843.077719] Call Trace:
[64843.077722] <TASK>
[64843.077724] __schedule+0x23d/0x590
[64843.077729] schedule+0x4e/0xb0
[64843.077735] schedule_preempt_disabled+0xe/0x10
[64843.077740] __mutex_lock.constprop.0+0x263/0x490
[64843.077747] __mutex_lock_slowpath+0x13/0x20
[64843.077752] mutex_lock+0x34/0x40
[64843.077758] mlx5_ib_invalidate_range+0x48/0x270 [mlx5_ib]
[64843.077808] __mmu_notifier_release+0x1a4/0x200
[64843.077816] exit_mmap+0x1bc/0x200
[64843.077822] ? walk_page_range+0x9c/0x120
[64843.077828] ? __cond_resched+0x1a/0x50
[64843.077833] ? mutex_lock+0x13/0x40
[64843.077839] ? uprobe_clear_state+0xac/0x120
[64843.077860] mmput+0x5f/0x140
[64843.077867] ib_umem_odp_map_dma_and_lock+0x21b/0x580 [ib_core]
[64843.077931] pagefault_real_mr+0x9a/0x140 [mlx5_ib]
[64843.077962] pagefault_mr+0xb4/0x550 [mlx5_ib]
[64843.077992] pagefault_single_data_segment.constprop.0+0x2ac/0x560
[mlx5_ib]
[64843.078022] mlx5_ib_eqe_pf_action+0x528/0x780 [mlx5_ib]
[64843.078051] process_one_work+0x22b/0x3d0
[64843.078059] worker_thread+0x53/0x410
[64843.078065] ? process_one_work+0x3d0/0x3d0
[64843.078073] kthread+0x12a/0x150
[64843.078079] ? set_kthread_struct+0x50/0x50
[64843.078085] ret_from_fork+0x22/0x30
[64843.078093] </TASK>
Fixes: 36f30e486d ("IB/core: Improve ODP to use hmm_range_fault()")
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/74d93541ea533ef7daec6f126deb1072500aeb16.1661251841.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84a53580c5 ]
The SRv6 layer allows defining HMAC data that can later be used to sign IPv6
Segment Routing Headers. This configuration is realised via netlink through
four attributes: SEG6_ATTR_HMACKEYID, SEG6_ATTR_SECRET, SEG6_ATTR_SECRETLEN and
SEG6_ATTR_ALGID. Because the SECRETLEN attribute is decoupled from the actual
length of the SECRET attribute, it is possible to provide invalid combinations
(e.g., secret = "", secretlen = 64). This case is not checked in the code and
with an appropriately crafted netlink message, an out-of-bounds read of up
to 64 bytes (max secret length) can occur past the skb end pointer and into
skb_shared_info:
Breakpoint 1, seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208
208 memcpy(hinfo->secret, secret, slen);
(gdb) bt
#0 seg6_genl_sethmac (skb=<optimized out>, info=<optimized out>) at net/ipv6/seg6.c:208
#1 0xffffffff81e012e9 in genl_family_rcv_msg_doit (skb=skb@entry=0xffff88800b1f9f00, nlh=nlh@entry=0xffff88800b1b7600,
extack=extack@entry=0xffffc90000ba7af0, ops=ops@entry=0xffffc90000ba7a80, hdrlen=4, net=0xffffffff84237580 <init_net>, family=<optimized out>,
family=<optimized out>) at net/netlink/genetlink.c:731
#2 0xffffffff81e01435 in genl_family_rcv_msg (extack=0xffffc90000ba7af0, nlh=0xffff88800b1b7600, skb=0xffff88800b1f9f00,
family=0xffffffff82fef6c0 <seg6_genl_family>) at net/netlink/genetlink.c:775
#3 genl_rcv_msg (skb=0xffff88800b1f9f00, nlh=0xffff88800b1b7600, extack=0xffffc90000ba7af0) at net/netlink/genetlink.c:792
#4 0xffffffff81dfffc3 in netlink_rcv_skb (skb=skb@entry=0xffff88800b1f9f00, cb=cb@entry=0xffffffff81e01350 <genl_rcv_msg>)
at net/netlink/af_netlink.c:2501
#5 0xffffffff81e00919 in genl_rcv (skb=0xffff88800b1f9f00) at net/netlink/genetlink.c:803
#6 0xffffffff81dff6ae in netlink_unicast_kernel (ssk=0xffff888010eec800, skb=0xffff88800b1f9f00, sk=0xffff888004aed000)
at net/netlink/af_netlink.c:1319
#7 netlink_unicast (ssk=ssk@entry=0xffff888010eec800, skb=skb@entry=0xffff88800b1f9f00, portid=portid@entry=0, nonblock=<optimized out>)
at net/netlink/af_netlink.c:1345
#8 0xffffffff81dff9a4 in netlink_sendmsg (sock=<optimized out>, msg=0xffffc90000ba7e48, len=<optimized out>) at net/netlink/af_netlink.c:1921
...
(gdb) p/x ((struct sk_buff *)0xffff88800b1f9f00)->head + ((struct sk_buff *)0xffff88800b1f9f00)->end
$1 = 0xffff88800b1b76c0
(gdb) p/x secret
$2 = 0xffff88800b1b76c0
(gdb) p slen
$3 = 64 '@'
The OOB data can then be read back from userspace by dumping HMAC state. This
commit fixes this by ensuring SECRETLEN cannot exceed the actual length of
SECRET.
Reported-by: Lucas Leong <wmliang.tw@gmail.com>
Tested: verified that EINVAL is correctly returned when secretlen > len(secret)
Fixes: 4f4853dc1c ("ipv6: sr: implement API to control SR HMAC structure")
Signed-off-by: David Lebrun <dlebrun@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd16eb948e ]
When a link is enslave to bond, it need to set the interface down first.
This makes the slave remove mac multicast address 33:33:00:00:00:01(The
IPv6 multicast address ff02::1 is kept even when the interface down). When
bond set the slave up, ipv6_mc_up() was not called due to commit c2edacf80e
("bonding / ipv6: no addrconf for slaves separately from master").
This is not an issue before we adding the lladdr target feature for bonding,
as the mac multicast address will be added back when bond interface up and
join group ff02::1.
But after adding lladdr target feature for bonding. When user set a lladdr
target, the unsolicited NA message with all-nodes multicast dest will be
dropped as the slave interface never add 33:33:00:00:00:01 back.
Fix this by calling ipv6_mc_up() to add 33:33:00:00:00:01 back when
the slave interface up.
Reported-by: LiLiang <liali@redhat.com>
Fixes: 5e1eeef69c ("bonding: NS target should accept link local address")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7f14132bf ]
When ns_ip6_target was set, the ipv6_dev_get_saddr() will be called to get
available source address and send IPv6 neighbor solicit message.
If the target is global address, ipv6_dev_get_saddr() will get any
available src address. But if the target is link local address,
ipv6_dev_get_saddr() will only get available address from our interface,
i.e. the corresponding bond interface.
But before bond interface up, all the address is tentative, while
ipv6_dev_get_saddr() will ignore tentative address. This makes we can't
find available link local src address, then bond_ns_send() will not be
called and no NS message was sent. Finally bond interface will keep in
down state.
Fix this by sending NS with unspecified address if there is no available
source address.
Reported-by: LiLiang <liali@redhat.com>
Fixes: 5e1eeef69c ("bonding: NS target should accept link local address")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d1b756acf ]
Functions that work on a pointer to virtual memory such as
virt_to_pfn() and users of that function such as
virt_to_page() are supposed to pass a pointer to virtual
memory, ideally a (void *) or other pointer. However since
many architectures implement virt_to_pfn() as a macro,
this function becomes polymorphic and accepts both a
(unsigned long) and a (void *).
If we instead implement a proper virt_to_pfn(void *addr)
function the following happens (occurred on arch/arm):
drivers/infiniband/sw/siw/siw_qp_tx.c:32:23: warning: incompatible
integer to pointer conversion passing 'dma_addr_t' (aka 'unsigned int')
to parameter of type 'const void *' [-Wint-conversion]
drivers/infiniband/sw/siw/siw_qp_tx.c:32:37: warning: passing argument
1 of 'virt_to_pfn' makes pointer from integer without a cast
[-Wint-conversion]
drivers/infiniband/sw/siw/siw_qp_tx.c:538:36: warning: incompatible
integer to pointer conversion passing 'unsigned long long'
to parameter of type 'const void *' [-Wint-conversion]
Fix this with an explicit cast. In one case where the SIW
SGE uses an unaligned u64 we need a double cast modifying the
virtual address (va) to a platform-specific uintptr_t before
casting to a (void *).
Fixes: b9be6f18cf ("rdma/siw: transmit path")
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220902215918.603761-1-linus.walleij@linaro.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 748008e1da ]
Commit b9684a71fc ("block, loop: support partitions without scanning")
adds GD_SUPPRESS_PART_SCAN for replacing part function of
GENHD_FL_NO_PART. But looks blk_add_partitions() is missed, since
loop doesn't want to add partitions if GENHD_FL_NO_PART was set.
And it causes regression on libblockdev (as called from udisks) which
operates with the LO_FLAGS_PARTSCAN.
Fixes the issue by not adding partitions if GD_SUPPRESS_PART_SCAN is
set.
Fixes: b9684a71fc ("block, loop: support partitions without scanning")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220823103819.395776-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c55f34b6ae ]
Removing 'hotplug-status' in backend_disconnected() means that it will be
removed even in the case that the frontend unilaterally disconnects (which
it is free to do at any time). The consequence of this is that, when the
frontend attempts to re-connect, the backend gets stuck in 'InitWait'
rather than moving straight to 'Connected' (which it can do because the
hotplug script has already run).
Instead, the 'hotplug-status' mode should be removed in netback_remove()
i.e. when the vif really is going away.
Fixes: 0f4558ae91 ("Revert "xen-netback: remove 'hotplug-status' once it has served its purpose"")
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa626da947 ]
iavf_reset_task() takes crit_lock at the beginning and holds
it during whole call. The function subsequently calls
iavf_init_interrupt_scheme() that grabs RTNL. Problem occurs
when userspace initiates during the reset task any ndo callback
that runs under RTNL like iavf_open() because some of that
functions tries to take crit_lock. This leads to classic A-B B-A
deadlock scenario.
To resolve this situation the device should be detached in
iavf_reset_task() prior taking crit_lock to avoid subsequent
ndos running under RTNL and reattach the device at the end.
Fixes: 62fe2a865e ("i40evf: add missing rtnl_lock() around i40evf_set_interrupt_capability")
Cc: Jacob Keller <jacob.e.keller@intel.com>
Cc: Patryk Piotrowski <patryk.piotrowski@intel.com>
Cc: SlawomirX Laba <slawomirx.laba@intel.com>
Tested-by: Vitaly Grinberg <vgrinber@redhat.com>
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59ac325557 ]
pf->avail_txqs was allocated using bitmap_zalloc, bitmap_free should be
used to free this memory.
Fixes: 78b5713ac1 ("ice: Alloc queue management bitmaps and arrays dynamically")
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e753eb675 ]
Fix leak, when user changes ring parameters.
During reallocation of RX buffers, new DMA mappings are created for
those buffers. New buffers with different RX ring count should
substitute older ones, but those buffers were freed in ice_vsi_cfg_rxq
and reallocated again with ice_alloc_rx_buf. kfree on rx_buf caused
leak of already mapped DMA.
Reallocate ZC with xdp_buf struct, when BPF program loads. Reallocate
back to rx_buf, when BPF program unloads.
If BPF program is loaded/unloaded and XSK pools are created, reallocate
RX queues accordingly in XDP_SETUP_XSK_POOL handler.
Steps for reproduction:
while :
do
for ((i=0; i<=8160; i=i+32))
do
ethtool -G enp130s0f0 rx $i tx $i
sleep 0.5
ethtool -g enp130s0f0
done
done
Fixes: 617f3e1b58 ("ice: xsk: allocate separate memory for XDP SW ring")
Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Chandan <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3261400639 ]
We got a recent syzbot report [1] showing a possible misuse
of pfmemalloc page status in TCP zerocopy paths.
Indeed, for pages coming from user space or other layers,
using page_is_pfmemalloc() is moot, and possibly could give
false positives.
There has been attempts to make page_is_pfmemalloc() more robust,
but not using it in the first place in this context is probably better,
removing cpu cycles.
Note to stable teams :
You need to backport 84ce071e38 ("net: introduce
__skb_fill_page_desc_noacc") as a prereq.
Race is more probable after commit c07aea3ef4
("mm: add a signature in struct page") because page_is_pfmemalloc()
is now using low order bit from page->lru.next, which can change
more often than page->index.
Low order bit should never be set for lru.next (when used as an anchor
in LRU list), so KCSAN report is mostly a false positive.
Backporting to older kernel versions seems not necessary.
[1]
BUG: KCSAN: data-race in lru_add_fn / tcp_build_frag
write to 0xffffea0004a1d2c8 of 8 bytes by task 18600 on cpu 0:
__list_add include/linux/list.h:73 [inline]
list_add include/linux/list.h:88 [inline]
lruvec_add_folio include/linux/mm_inline.h:105 [inline]
lru_add_fn+0x440/0x520 mm/swap.c:228
folio_batch_move_lru+0x1e1/0x2a0 mm/swap.c:246
folio_batch_add_and_move mm/swap.c:263 [inline]
folio_add_lru+0xf1/0x140 mm/swap.c:490
filemap_add_folio+0xf8/0x150 mm/filemap.c:948
__filemap_get_folio+0x510/0x6d0 mm/filemap.c:1981
pagecache_get_page+0x26/0x190 mm/folio-compat.c:104
grab_cache_page_write_begin+0x2a/0x30 mm/folio-compat.c:116
ext4_da_write_begin+0x2dd/0x5f0 fs/ext4/inode.c:2988
generic_perform_write+0x1d4/0x3f0 mm/filemap.c:3738
ext4_buffered_write_iter+0x235/0x3e0 fs/ext4/file.c:270
ext4_file_write_iter+0x2e3/0x1210
call_write_iter include/linux/fs.h:2187 [inline]
new_sync_write fs/read_write.c:491 [inline]
vfs_write+0x468/0x760 fs/read_write.c:578
ksys_write+0xe8/0x1a0 fs/read_write.c:631
__do_sys_write fs/read_write.c:643 [inline]
__se_sys_write fs/read_write.c:640 [inline]
__x64_sys_write+0x3e/0x50 fs/read_write.c:640
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
read to 0xffffea0004a1d2c8 of 8 bytes by task 18611 on cpu 1:
page_is_pfmemalloc include/linux/mm.h:1740 [inline]
__skb_fill_page_desc include/linux/skbuff.h:2422 [inline]
skb_fill_page_desc include/linux/skbuff.h:2443 [inline]
tcp_build_frag+0x613/0xb20 net/ipv4/tcp.c:1018
do_tcp_sendpages+0x3e8/0xaf0 net/ipv4/tcp.c:1075
tcp_sendpage_locked net/ipv4/tcp.c:1140 [inline]
tcp_sendpage+0x89/0xb0 net/ipv4/tcp.c:1150
inet_sendpage+0x7f/0xc0 net/ipv4/af_inet.c:833
kernel_sendpage+0x184/0x300 net/socket.c:3561
sock_sendpage+0x5a/0x70 net/socket.c:1054
pipe_to_sendpage+0x128/0x160 fs/splice.c:361
splice_from_pipe_feed fs/splice.c:415 [inline]
__splice_from_pipe+0x222/0x4d0 fs/splice.c:559
splice_from_pipe fs/splice.c:594 [inline]
generic_splice_sendpage+0x89/0xc0 fs/splice.c:743
do_splice_from fs/splice.c:764 [inline]
direct_splice_actor+0x80/0xa0 fs/splice.c:931
splice_direct_to_actor+0x305/0x620 fs/splice.c:886
do_splice_direct+0xfb/0x180 fs/splice.c:974
do_sendfile+0x3bf/0x910 fs/read_write.c:1249
__do_sys_sendfile64 fs/read_write.c:1317 [inline]
__se_sys_sendfile64 fs/read_write.c:1303 [inline]
__x64_sys_sendfile64+0x10c/0x150 fs/read_write.c:1303
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
value changed: 0x0000000000000000 -> 0xffffea0004a1d288
Reported by Kernel Concurrency Sanitizer on:
CPU: 1 PID: 18611 Comm: syz-executor.4 Not tainted 6.0.0-rc2-syzkaller-00248-ge022620b5d05-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/22/2022
Fixes: c07aea3ef4 ("mm: add a signature in struct page")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84ce071e38 ]
Managed pages contain pinned userspace pages and controlled by upper
layers, there is no need in tracking skb->pfmemalloc for them. Introduce
a helper for filling frags but ignoring page tracking, it'll be needed
later.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2b224abd9 ]
There is a shift wrapping bug in this code so anything thing above
31 will return false.
Fixes: 35c55c9877 ("tipc: add neighbor monitoring framework")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9efd23297c ]
The sch_sfb enqueue() routine assumes the skb is still alive after it has
been enqueued into a child qdisc, using the data in the skb cb field in the
increment_qlen() routine after enqueue. However, the skb may in fact have
been freed, causing a use-after-free in this case. In particular, this
happens if sch_cake is used as a child of sfb, and the GSO splitting mode
of CAKE is enabled (in which case the skb will be split into segments and
the original skb freed).
Fix this by copying the sfb cb data to the stack before enqueueing the skb,
and using this stack copy in increment_qlen() instead of the skb pointer
itself.
Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-18231
Fixes: e13e02a3c6 ("net_sched: SFB flow scheduler")
Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7fdc77665f ]
This reverts commit 2c87c6f9fb.
Meanwhile it turned out that the following commit is the proper
workaround for the issue that 2c87c6f9fb tries to address.
a3a57bf07d ("net: stmmac: work around sporadic tx issue on link-up")
It's nor clear why the to be reverted commit helped for one user,
for others it didn't make a difference.
Fixes: 2c87c6f9fb ("net: phy: meson-gxl: improve link-up behavior")
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/8deeeddc-6b71-129b-1918-495a12dc11e3@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aded3cad90 ]
When replacing KUNIT_BINARY_*_MSG_ASSERTION() macros with
KUNIT_BINARY_INT_ASSERTION(), the assert_type parameter was not always
correctly transferred. Specifically, the following errors were
introduced:
- KUNIT_EXPECT_LE_MSG() uses KUNIT_ASSERTION
- KUNIT_ASSERT_LT_MSG() uses KUNIT_EXPECTATION
- KUNIT_ASSERT_GT_MSG() uses KUNIT_EXPECTATION
A failing KUNIT_EXPECT_LE_MSG() test thus prevents further tests from
running, while failing KUNIT_ASSERT_{LT,GT}_MSG() tests do not prevent
further tests from running. This is contrary to the documentation,
which states that failing KUNIT_EXPECT_* macros allow further tests to
run, while failing KUNIT_ASSERT_* macros should prevent this.
Revert the KUNIT_{ASSERTION,EXPECTATION} switches to fix the behaviour
for the affected macros.
Fixes: 40f39777ce ("kunit: decrease macro layering for integer asserts")
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7903192c4b ]
rxrpc and kafs between them try to use the receive timestamp on the first
data packet (ie. the one with sequence number 1) as a base from which to
calculate the time at which callback promise and lock expiration occurs.
However, we don't know how long it took for the server to send us the reply
from it having completed the basic part of the operation - it might then,
for instance, have to send a bunch of a callback breaks, depending on the
particular operation.
Fix this by using the time at which the operation is issued on the client
as a base instead. That should never be longer than the server's idea of
the expiry time.
Fixes: 781070551c ("afs: Fix calculation of callback expiry time")
Fixes: 2070a3e449 ("rxrpc: Allow the reply time to be obtained on a client call")
Suggested-by: Jeffrey E Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d40f728e2 ]
rxkad_verify_packet_2() has a small stack-allocated sglist of 4 elements,
but if that isn't sufficient for the number of fragments in the socket
buffer, we try to allocate an sglist large enough to hold all the
fragments.
However, for large packets with a lot of fragments, this isn't sufficient
and we need at least one additional fragment.
The problem manifests as skb_to_sgvec() returning -EMSGSIZE and this then
getting returned by userspace. Most of the time, this isn't a problem as
rxrpc sets a limit of 5692, big enough for 4 jumbo subpackets to be glued
together; occasionally, however, the server will ignore the reported limit
and give a packet that's a lot bigger - say 19852 bytes with ->nr_frags
being 7. skb_to_sgvec() then tries to return a "zeroth" fragment that
seems to occur before the fragments counted by ->nr_frags and we hit the
end of the sglist too early.
Note that __skb_to_sgvec() also has an skb_walk_frags() loop that is
recursive up to 24 deep. I'm not sure if I need to take account of that
too - or if there's an easy way of counting those frags too.
Fix this by counting an extra frag and allocating a larger sglist based on
that.
Fixes: d0d5c0cd1e ("rxrpc: Use skb_unshare() rather than skb_cow_data()")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-afs@lists.infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac56a0b48d ]
Because rxrpc pretends to be a tunnel on top of a UDP/UDP6 socket, allowing
it to siphon off UDP packets early in the handling of received UDP packets
thereby avoiding the packet going through the UDP receive queue, it doesn't
get ICMP packets through the UDP ->sk_error_report() callback. In fact, it
doesn't appear that there's any usable option for getting hold of ICMP
packets.
Fix this by adding a new UDP encap hook to distribute error messages for
UDP tunnels. If the hook is set, then the tunnel driver will be able to
see ICMP packets. The hook provides the offset into the packet of the UDP
header of the original packet that caused the notification.
An alternative would be to call the ->error_handler() hook - but that
requires that the skbuff be cloned (as ip_icmp_error() or ipv6_cmp_error()
do, though isn't really necessary or desirable in rxrpc's case is we want
to parse them there and then, not queue them).
Changes
=======
ver #3)
- Fixed an uninitialised variable.
ver #2)
- Fixed some missing CONFIG_AF_RXRPC_IPV6 conditionals.
Fixes: 5271953cad ("rxrpc: Use the UDP encap_rcv hook")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2027f11468 ]
When the delayed registration is specified via either delayed_register
option or the quirk, we delay the invocation of snd_card_register()
until the given interface. But if a wrong value has been set there
and there are more interfaces over the given interface number,
snd_card_register() call would be missing for those interfaces.
This patch catches up those missing calls by fixing the comparison of
the interface number. Now the call is skipped only if the processed
interface is less than the given interface, instead of the exact
match.
Fixes: b70038ef4f ("ALSA: usb-audio: Add delayed_register option")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216082
Link: https://lore.kernel.org/r/20220831125901.4660-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e1afce586 ]
The info message that was added in the commit a4aad5636c ("ALSA:
usb-audio: Inform devices that need delayed registration") is actually
useful to know the need for the delayed registration. However, it
turned out that this doesn't catch the all cases; namely, this warned
only when a PCM stream is attached onto the existing PCM instance, but
it doesn't count for a newly created PCM instance. This made
confusion as if there were no further delayed registration.
This patch moves the check to the code path for either adding a stream
or creating a PCM instance. Also, make it simpler by checking the
card->registered flag instead of querying each snd_device state.
Fixes: a4aad5636c ("ALSA: usb-audio: Inform devices that need delayed registration")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216082
Link: https://lore.kernel.org/r/20220831125901.4660-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0efe125cfb ]
Ensure the match happens in the right direction, previously the
destination used was the server, not the NAT host, as the comment
shows the code intended.
Additionally nf_nat_irc uses port 0 as a signal and there's no valid way
it can appear in a DCC message, so consider port 0 also forged.
Fixes: 869f37d8e4 ("[NETFILTER]: nf_conntrack/nf_nat: add IRC helper port")
Signed-off-by: David Leadbeater <dgl@dgl.cx>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0dec364ffe ]
PolarFire SoC does not have the same l2 cache controller as the fu540,
featuring an extra interrupt. Appease the devicetree checker overlords
by adding a PolarFire SoC specific compatible to fix the below sort of
warnings:
mpfs-polarberry.dtb: cache-controller@2010000: interrupts: [[1], [3], [4], [2]] is too long
Fixes: 0fa6107eca ("RISC-V: Initial DTS for Microchip ICICLE board")
Fixes: 34fc9cc3ae ("riscv: dts: microchip: correct L2 cache interrupts")
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d047283a70 ]
The IPv6 path already drops dst in the daddr changed case, but the IPv4
path does not. This change makes the two code paths consistent.
Further, it is possible that there is already a metadata_dst allocated from
ingress that might already be attached to skbuff->dst while following
the bridge path. If it is not released before setting a new
metadata_dst, it will be leaked. This is similar to what is done in
bpf_set_tunnel_key() or ip6_route_input().
It is important to note that the memory being leaked is not the dst
being set in the bridge code, but rather memory allocated from some
other code path that is not being freed correctly before the skb dst is
overwritten.
An example of the leakage fixed by this commit found using kmemleak:
unreferenced object 0xffff888010112b00 (size 256):
comm "softirq", pid 0, jiffies 4294762496 (age 32.012s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 80 16 f1 83 ff ff ff ff ................
e1 4e f6 82 ff ff ff ff 00 00 00 00 00 00 00 00 .N..............
backtrace:
[<00000000d79567ea>] metadata_dst_alloc+0x1b/0xe0
[<00000000be113e13>] udp_tun_rx_dst+0x174/0x1f0
[<00000000a36848f4>] geneve_udp_encap_recv+0x350/0x7b0
[<00000000d4afb476>] udp_queue_rcv_one_skb+0x380/0x560
[<00000000ac064aea>] udp_unicast_rcv_skb+0x75/0x90
[<000000009a8ee8c5>] ip_protocol_deliver_rcu+0xd8/0x230
[<00000000ef4980bb>] ip_local_deliver_finish+0x7a/0xa0
[<00000000d7533c8c>] __netif_receive_skb_one_core+0x89/0xa0
[<00000000a879497d>] process_backlog+0x93/0x190
[<00000000e41ade9f>] __napi_poll+0x28/0x170
[<00000000b4c0906b>] net_rx_action+0x14f/0x2a0
[<00000000b20dd5d4>] __do_softirq+0xf4/0x305
[<000000003a7d7e15>] __irq_exit_rcu+0xc3/0x140
[<00000000968d39a2>] sysvec_apic_timer_interrupt+0x9e/0xc0
[<000000009e920794>] asm_sysvec_apic_timer_interrupt+0x16/0x20
[<000000008942add0>] native_safe_halt+0x13/0x20
Florian Westphal says: "Original code was likely fine because nothing
ever did set a skb->dst entry earlier than bridge in those days."
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Harsh Modi <harshmodi@google.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d074b750d ]
VDD_OTHER is not connected to any on board consumer thus it is not
needed to keep it enabled all the time.
Fixes: 68a95ef72c ("ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICP")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220826083927.3107272-9-claudiu.beznea@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 617a0d9fe6 ]
ldo2 is not used by any consumer on sama5d27_wlsom1 board, thus
don't keep it enabled all the time.
Fixes: 5d4c3cfb63 ("ARM: dts: at91: sama5d27_wlsom1: add SAMA5D27 wlsom1 and wlsom1-ek")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220826083927.3107272-8-claudiu.beznea@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f41d52ced ]
Min and max output ranges of regulators need to satisfy board
requirements not PMIC requirements. Thus adjust device tree to
cope with this.
Fixes: 7540629e2f ("ARM: dts: at91: add sama7g5 SoC DT and sama7g5-ek")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220826083927.3107272-7-claudiu.beznea@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7737d93666 ]
Min and max output ranges of regulators need to satisfy board
requirements not PMIC requirements. Thus adjust device tree to
cope with this.
Fixes: 68a95ef72c ("ARM: dts: at91: sama5d2-icp: add SAMA5D2-ICP")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220826083927.3107272-6-claudiu.beznea@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit addf7efec2 ]
Min and max output ranges of regulators need to satisfy board
requirements not PMIC requirements. Thus adjust device tree to
cope with this.
Fixes: 5d4c3cfb63 ("ARM: dts: at91: sama5d27_wlsom1: add SAMA5D27 wlsom1 and wlsom1-ek")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220826083927.3107272-5-claudiu.beznea@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a94b83a7d ]
On SAMA7G5, when resuming from backup and self-refresh, the bootloader
performs DDR PHY recalibration by restoring the value of ZQ0SR0 (stored
in RAM by Linux before going to backup and self-refresh). It has been
discovered that the current procedure doesn't work for all possible values
that might go to ZQ0SR0 due to hardware bug. The workaround to this is to
avoid storing some values in ZQ0SR0. Thus Linux will read the ZQ0SR0
register and cache its value in RAM after processing it (using
modified_gray_code array). The bootloader will restore the processed value.
Fixes: d2d4716d83 ("ARM: at91: pm: save ddr phy calibration data to securam")
Suggested-by: Frederic Schumacher <frederic.schumacher@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220826083927.3107272-4-claudiu.beznea@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a02875c4cb ]
It has been discovered that on some parts, from time to time, self-refresh
procedure doesn't work as expected. Debugging and investigating it proved
that disabling AC DLL introduce glitches in RAM controllers which
leads to unexpected behavior. This is confirmed as a hardware bug. DLL
bypass disables 3 DLLs: 2 DX DLLs and AC DLL. Thus, keep only DX DLLs
disabled. This introduce 6mA extra current consumption on VDDCORE when
switching to any ULP mode or standby mode but the self-refresh procedure
still works.
Fixes: f0bbf17958 ("ARM: at91: pm: add self-refresh support for sama7g5")
Suggested-by: Frederic Schumacher <frederic.schumacher@microchip.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Tested-by: Cristian Birsan <cristian.birsan@microchip.com>
Link: https://lore.kernel.org/r/20220826083927.3107272-3-claudiu.beznea@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40b717bfce ]
Sometimes 'wilc_sdio_cmd53' is called with addresses pointing to an
object on the stack. Use dynamically allocated memory for cmd53 instead
of stack address which is not DMA'able.
Fixes: 5625f965d7 ("wilc1000: move wilc driver out of staging")
Reported-by: Michael Walle <mwalle@kernel.org>
Suggested-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Ajay Singh <ajay.kathat@microchip.com>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Tested-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220809075749.62752-1-ajay.kathat@microchip.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45baad7dd9 ]
The bt number of qpc_timer of HIP09 increases compared with that of HIP08.
Therefore, qpc_timer_bt_num and num_qpc_timer do not match. As a result,
the driver may fail to allocate qpc_timer. So the driver needs to uniquely
uses qpc_timer_bt_num to represent the bt number of qpc_timer.
Fixes: 0e40dc2f70 ("RDMA/hns: Add timer allocation support for hip08")
Link: https://lore.kernel.org/r/20220829105021.1427804-4-liangwenpeng@huawei.com
Signed-off-by: Yixing Liu <liuyixing1@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
