phylink_stop() will cause phylink to call the mac_link_down() operation
before phylink_stop() returns. As mac_link_down() will call
stmmac_eee_init(false), this will set both priv->eee_active and
priv->eee_enabled to be false, deleting the eee_ctrl_timer if
priv->eee_enabled was previously set.
As stmmac_release() calls phylink_stop() before checking whether
priv->eee_enabled is true, this is a condition that can never be
satisfied, and thus the code within this if() block will never be
executed. Remove it.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZEg-0002LE-HH@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the initialisation of the EEE software timer to the probe function
as it is unnecessary to do this each time we enable software LPI.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZEb-0002L8-DJ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
priv->eee_enabled and priv->eee_active are both assigned using boolean
values. Type them as bool rather than int.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZEW-0002L2-9w@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since all call sites of stmmac_eee_init() assign priv->eee_active
immediately before, pass this state into stmmac_eee_init() and
assign priv->eee_active within this function.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZER-0002Kv-5O@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All call sites for stmmac_eee_init() assign the return code to
priv->eee_enabled. Rather than having this coded at each call site,
move the assignment inside stmmac_eee_init().
Since stmmac_init_eee() takes priv->lock before checking the state of
priv->eee_enabled, move the assignment within the locked region. Also,
stmmac_suspend() checks the state of this member under the lock. While
two concurrent calls to stmmac_init_eee() aren't possible, there is
a possibility that stmmac_suspend() may run concurrently with a change
of priv->eee_enabled unless we modify it under the lock.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZEM-0002Kq-2Z@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
priv->eee_tw_timer is only assigned during initialisation to a
constant value (STMMAC_DEFAULT_TWT_LS) and then never changed.
Remove priv->eee_tw_timer, and instead use STMMAC_DEFAULT_TWT_LS
for both uses in stmmac_eee_init().
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZEG-0002Kk-VH@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert stmmac to use phy_eee_rx_clock_stop() to set the PHY receive
clock stop in LPI setting, rather than calling the legacy
phy_init_eee() function.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZEB-0002Ke-RZ@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Report the number of EEE error statistics in the xstats even when EEE
is not enabled in hardware, but is supported. The PHY maintains this
counter even when EEE is not enabled.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZE6-0002KY-Nx@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Through using phylib's EEE state, priv->tx_lpi_enabled has become a
write-only variable. Remove it.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZE1-0002KS-K1@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
stmmac_disable_eee_mode() is now only called from stmmac_xmit() when
both priv->tx_path_in_lpi_mode and priv->eee_sw_timer_en are true.
Therefore:
if (!priv->eee_sw_timer_en)
in stmmac_disable_eee_mode() will never be true, so this is dead code.
Remove it, and rename the function to indicate that it now only deals
with software based EEE mode.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZDw-0002KL-Gg@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Setting edata->tx_lpi_enabled in stmmac_ethtool_op_get_eee() gets
overwritten by phylib, so there's no point setting this.
In stmmac_ethtool_op_set_eee(), now that stmmac is using the result of
phylib's evaluation of EEE, there is no need to handle anything in the
ethtool EEE ops other than calling through to the appropriate phylink
function, which will pass on to phylib the users request.
As stmmac_disable_eee_mode() is now no longer called from outside
stmmac_main.c, make it static.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZDr-0002KF-Cv@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make stmmac EEE depend on phylib's evaluation of user settings and PHY
negotiation, as indicated by phy->enable_tx_lpi. This will ensure when
phylib has evaluated that the user has disabled LPI, phy_init_eee()
will not be called, and priv->eee_active will be false, causing LPI/EEE
to be disabled.
This is an interim measure - phy_init_eee() will be removed in a later
patch.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZDm-0002K9-9w@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since eee_timer is used to initialise priv->tx_lpi_timer, this also
should be unsigned to avoid a negative number being interpreted as a
very large positive number. Note that this makes the check for negative
numbers passed in as a module parameter redundant, and passing a
negative number will now produce a large delay rather than the
default. Since the default is used without an argument, passing a
negative number would be quite obscure. However, if users do, then
this will need to be revisited.
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZDh-0002K3-6y@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ethtool interface uses u32 for tx_lpi_timer, and so does phylib.
Use u32 to store this internally within stmmac rather than "int"
which could misinterpret large values.
Correct "value" in dwmac4_set_eee_lpi_entry_timer() to use u32
rather than int, which is derived from tx_lpi_timer. Even though this
path won't be used with values larger than STMMAC_ET_MAX, this brings
consistency of type usage to the stmmac code for this variable.
We leave eee_timer unchanged for now, with the assumption that values
up to INT_MAX will safely fit in a u32.
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZDc-0002Jx-3b@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When stmmac_ethtool_op_get_eee() is called, stmmac sets the tx_lpi_timer
and tx_lpi_enabled members, and then calls into phylink and thus phylib.
phylib overwrites these members.
phylib will also cause a link down/link up transition when settings
that impact the MAC have been changed.
Convert stmmac to use the tx_lpi_timer setting in struct phy_device,
updating priv->tx_lpi_timer each time when the link comes up, rather
than trying to maintain this user setting itself. We initialise the
phylib tx_lpi_timer setting by doing a get_ee-modify-set_eee sequence
with the last known priv->tx_lpi_timer value. In order for this to work
correctly, we also need this member to be initialised earlier.
As stmmac_eee_init() is no longer called outside of stmmac_main.c, make
it static.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZDW-0002Jr-W3@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a function to allow configuration of the PCS's clock stop enable
bit, used to configure whether the xMII receive clock can be stopped
during LPI mode.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1tVZDR-0002Jl-Ry@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=U79q
-----END PGP SIGNATURE-----
Merge tag 'ipsec-next-2025-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
ipsec-next-2025-01-09
1) Implement the AGGFRAG protocol and basic IP-TFS (RFC9347) functionality.
From Christian Hopps.
2) Support ESN context update to hardware for TX.
From Jianbo Liu.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The use of of_property_read_bool() for non-boolean properties is
deprecated in favor of of_property_present() when testing for property
presence.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a new selftest for netconsole that tests the userdata entry limit
functionality. The test performs two key verifications:
1. Create MAX_USERDATA_ITEMS (16) userdata entries successfully
2. Confirm that attempting to create an additional userdata entry fails
The selftest script uses the netcons library and checks the behavior
by attempting to create entries beyond the maximum allowed limit.
Signed-off-by: Breno Leitao <leitao@debian.org>
Tested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250108-netcons_overflow_test-v3-4-3d85eb091bec@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Modify the cleanup function to remove all userdata keys created during the
test, instead of just deleting a single predefined key. This ensures a
more thorough cleanup of temporary resources.
Move the KEY_PATH variable definition inside the set_user_data function
to reduce global variables and improve encapsulation. The KEY_PATH
variable is now dynamically created when setting user data.
This change has no effect on the current test, while improving an
upcoming test that would create several userdata entries.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250108-netcons_overflow_test-v3-3-3d85eb091bec@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Split helper functions from the netconsole basic test into a separate
library file to enable reuse across different netconsole tests. This
change only moves the existing helper functions to lib/sh/lib_netcons.sh
while preserving the same test functionality.
The helpers provide common functions for:
- Setting up network namespaces and interfaces
- Managing netconsole dynamic targets
- Setting user data
- Handling test dependencies
- Cleanup operations
Do not make any change in the code, other than the mechanical
separation.
Signed-off-by: Breno Leitao <leitao@debian.org>
Tested-by: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250108-netcons_overflow_test-v3-2-3d85eb091bec@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netconsole configfs helpers doesn't allow the creation of more than
MAX_USERDATA_ITEMS items.
Add a warning when netconsole userdata update function attempts sees
more than MAX_USERDATA_ITEMS entries.
Replace silent ignore mechanism with WARN_ON_ONCE() to highlight
potential misuse during development and debugging.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250108-netcons_overflow_test-v3-1-3d85eb091bec@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jan Stancek says:
====================
tools: ynl: add install target
This series adds an install target for ynl. The python code
is moved to a subdirectory, so it can be used as a package
with flat layout, as well as directly from the tree.
To try the install as a non-root user you can run:
$ mkdir /tmp/myroot
$ make DESTDIR=/tmp/myroot install
$ PATH="/tmp/myroot/usr/bin:$PATH" PYTHONPATH="$(ls -1d /tmp/myroot/usr/lib/python*/site-packages)" ynl --help
Proposed install layout is described in last patch.
====================
Link: https://patch.msgid.link/cover.1736343575.git.jstancek@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Generate docs using ynl_gen_rst and add install target for
headers, specs and generates rst files.
Factor out SPECS_DIR since it's repeated many times.
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/645c68e3d201f1ef4276e3daddfe06262a0c2804.1736343575.git.jstancek@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move python code to a separate directory so it can be
packaged as a python module. Updates existing references
in selftests and docs.
Also rename ynl-gen-[c|rst] to ynl_gen_[c|rst], avoid
dashes as these prevent easy imports for entrypoints.
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/a4151bad0e6984e7164d395125ce87fd2e048bf1.1736343575.git.jstancek@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Empty nests are the same size as a flag at the netlink level
(just a 4 byte nlattr without a payload). They are sometimes
useful in case we want to only communicate a presence of
something but may want to add more details later.
This may be the case in the upcoming io_uring ZC patches,
for example.
Improve handling of nested empty structs. We already support
empty structs since a lot of netlink replies are empty, but
for nested ones we need minor tweaks to avoid pointless empty
lines and unused variables.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://patch.msgid.link/20250108200758.2693155-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
No outstanding fixes / investigations at this time.
Current release - new code bugs:
- eth: fbnic: revert HWMON support, it doesn't work at all
and revert is similar size as the fixes
Previous releases - regressions:
- tcp: allow a connection when sk_max_ack_backlog is zero
- tls: fix tls_sw_sendmsg error handling
Previous releases - always broken:
- netdev netlink family:
- prevent accessing NAPI instances from another namespace
- don't dump Tx and uninitialized NAPIs
- net: sysctl: avoid using current->nsproxy, fix null-deref if task
is exiting and stick to opener's netns
- sched: sch_cake: add bounds checks to host bulk flow fairness counts
Misc:
- annual cleanup of inactive maintainers
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ABI6
-----END PGP SIGNATURE-----
Merge tag 'net-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, Bluetooth and WPAN.
No outstanding fixes / investigations at this time.
Current release - new code bugs:
- eth: fbnic: revert HWMON support, it doesn't work at all and revert
is similar size as the fixes
Previous releases - regressions:
- tcp: allow a connection when sk_max_ack_backlog is zero
- tls: fix tls_sw_sendmsg error handling
Previous releases - always broken:
- netdev netlink family:
- prevent accessing NAPI instances from another namespace
- don't dump Tx and uninitialized NAPIs
- net: sysctl: avoid using current->nsproxy, fix null-deref if task
is exiting and stick to opener's netns
- sched: sch_cake: add bounds checks to host bulk flow fairness
counts
Misc:
- annual cleanup of inactive maintainers"
* tag 'net-6.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (57 commits)
rds: sysctl: rds_tcp_{rcv,snd}buf: avoid using current->nsproxy
sctp: sysctl: plpmtud_probe_interval: avoid using current->nsproxy
sctp: sysctl: udp_port: avoid using current->nsproxy
sctp: sysctl: auth_enable: avoid using current->nsproxy
sctp: sysctl: rto_min/max: avoid using current->nsproxy
sctp: sysctl: cookie_hmac_alg: avoid using current->nsproxy
mptcp: sysctl: blackhole timeout: avoid using current->nsproxy
mptcp: sysctl: sched: avoid using current->nsproxy
mptcp: sysctl: avail sched: remove write access
MAINTAINERS: remove Lars Povlsen from Microchip Sparx5 SoC
MAINTAINERS: remove Noam Dagan from AMAZON ETHERNET
MAINTAINERS: remove Ying Xue from TIPC
MAINTAINERS: remove Mark Lee from MediaTek Ethernet
MAINTAINERS: mark stmmac ethernet as an Orphan
MAINTAINERS: remove Andy Gospodarek from bonding
MAINTAINERS: update maintainers for Microchip LAN78xx
MAINTAINERS: mark Synopsys DW XPCS as Orphan
net/mlx5: Fix variable not being completed when function returns
rtase: Fix a check for error in rtase_alloc_msix()
net: stmmac: dwmac-tegra: Read iommu stream id from device tree
...
The RX adaptive interrupt moderation table is indexed by link speed
range, where the last row of the table is the catch-all for all link
speeds greater than 10Gbps. The comment said 10 - 40Gbps, but since
there are now adapters with link speeds than 40Gbps, the comment is now
wrong and should indicate it applies to all speeds greater than 10Gbps.
Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250107214159.18807-4-johndale@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The link speed is obtained in the RX adaptive coalescing function. It
was being called at probe time when the link may not be up. Change the
call to run after the Link comes up.
The impact of not getting the correct link speed was that the low end of
the adaptive interrupt range was always being set to 0 which could have
caused a slight increase in the number of RX interrupts.
Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://patch.msgid.link/20250107214159.18807-3-johndale@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the function used for setting the RX coalescing range to before
the function that checks the link status. It needs to be called from
there instead of from the probe function.
There is no functional change.
Co-developed-by: Nelson Escobar <neescoba@cisco.com>
Signed-off-by: Nelson Escobar <neescoba@cisco.com>
Co-developed-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: Satish Kharat <satishkh@cisco.com>
Signed-off-by: John Daley <johndale@cisco.com>
Link: https://patch.msgid.link/20250107214159.18807-2-johndale@cisco.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All Qualcomm firmwares uploaded to linux-firmware are in MBN format,
instead of split MDT. No functional changes, just correct the DTS
example so people will not rely on unaccepted files.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alex Elder <elder@kernel.org>
Link: https://patch.msgid.link/20250108120242.156201-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=QYC1
-----END PGP SIGNATURE-----
Merge tag 'for-6.13-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes.
Besides the one-liners in Btrfs there's fix to the io_uring and
encoded read integration (added in this development cycle). The update
to io_uring provides more space for the ongoing command that is then
used in Btrfs to handle some cases.
- io_uring and encoded read:
- provide stable storage for io_uring command data
- make a copy of encoded read ioctl call, reuse that in case the
call would block and will be called again
- properly initialize zlib context for hardware compression on s390
- fix max extent size calculation on filesystems with non-zoned
devices
- fix crash in scrub on crafted image due to invalid extent tree"
* tag 'for-6.13-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: zlib: fix avail_in bytes for s390 zlib HW compression path
btrfs: zoned: calculate max_extent_size properly on non-zoned setup
btrfs: avoid NULL pointer dereference if no valid extent tree
btrfs: don't read from userspace twice in btrfs_uring_encoded_read()
io_uring: add io_uring_cmd_get_async_data helper
io_uring/cmd: add per-op data to struct io_uring_cmd_data
io_uring/cmd: rename struct uring_cache to io_uring_cmd_data
-----BEGIN PGP SIGNATURE-----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=PG5v
-----END PGP SIGNATURE-----
Merge tag 'nf-25-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix imbalance between flowtable BIND and UNBIND calls to configure
hardware offload, this fixes a possible kmemleak.
2) Clamp maximum conntrack hashtable size to INT_MAX to fix a possible
WARN_ON_ONCE splat coming from kvmalloc_array(), only possible from
init_netns.
* tag 'nf-25-01-09' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: conntrack: clamp maximum hashtable size to INT_MAX
netfilter: nf_tables: imbalance in flowtable binding
====================
Link: https://patch.msgid.link/20250109123532.41768-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
net: sysctl: avoid using current->nsproxy
As pointed out by Al Viro and Eric Dumazet in [1], using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns as it is usually done. This could cause
unexpected issues when other operations are done on the wrong netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'net' or 'pernet' structure can be obtained from the table->data
using container_of().
Note that table->data could also be used directly in more places, but
that would increase the size of this fix to replace all accesses via
'net'. Probably best to avoid that for fixes.
Patches 2-9 remove access of net via current->nsproxy in sysfs handlers
in MPTCP, SCTP and RDS. There are multiple patches doing almost the same
thing, but the reason is to ease the backports.
Patch 1 is not directly linked to this, but it is a small fix for MPTCP
available_schedulers sysctl knob to explicitly mark it as read-only.
Please note that this series does not address Al's comment [2]. In SCTP,
some sysctl knobs set other sysfs-exposed variables for the min/max: two
processes could then write two linked values at the same time, resulting
in new values being outside the new boundaries. It would be great if
SCTP developers can look at this problem.
Link: https://lore.kernel.org/67769ecb.050a0220.3a8527.003f.GAE@google.com [1]
Link: https://lore.kernel.org/20250105211158.GL1977892@ZenIV [2]
====================
Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-0-5df34b2083e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The per-netns structure can be obtained from the table->data using
container_of(), then the 'net' one can be retrieved from the listen
socket (if available).
Fixes: c6a58ffed5 ("RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/67769ecb.050a0220.3a8527.003f.GAE@google.com [1]
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-9-5df34b2083e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'net' structure can be obtained from the table->data using
container_of().
Note that table->data could also be used directly, as this is the only
member needed from the 'net' structure, but that would increase the size
of this fix, to use '*data' everywhere 'net->sctp.probe_interval' is
used.
Fixes: d1e462a7a5 ("sctp: add probe_interval in sysctl and sock/asoc/transport")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/67769ecb.050a0220.3a8527.003f.GAE@google.com [1]
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-8-5df34b2083e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'net' structure can be obtained from the table->data using
container_of().
Note that table->data could also be used directly, but that would
increase the size of this fix, while 'sctp.ctl_sock' still needs to be
retrieved from 'net' structure.
Fixes: 046c052b47 ("sctp: enable udp tunneling socks")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/67769ecb.050a0220.3a8527.003f.GAE@google.com [1]
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-7-5df34b2083e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'net' structure can be obtained from the table->data using
container_of().
Note that table->data could also be used directly, but that would
increase the size of this fix, while 'sctp.ctl_sock' still needs to be
retrieved from 'net' structure.
Fixes: b14878ccb7 ("net: sctp: cache auth_enable per endpoint")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/67769ecb.050a0220.3a8527.003f.GAE@google.com [1]
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-6-5df34b2083e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'net' structure can be obtained from the table->data using
container_of().
Note that table->data could also be used directly, as this is the only
member needed from the 'net' structure, but that would increase the size
of this fix, to use '*data' everywhere 'net->sctp.rto_min/max' is used.
Fixes: 4f3fdf3bc5 ("sctp: add check rto_min and rto_max in sysctl")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/67769ecb.050a0220.3a8527.003f.GAE@google.com [1]
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-5-5df34b2083e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As mentioned in a previous commit of this series, using the 'net'
structure via 'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'net' structure can be obtained from the table->data using
container_of().
Note that table->data could also be used directly, as this is the only
member needed from the 'net' structure, but that would increase the size
of this fix, to use '*data' everywhere 'net->sctp.sctp_hmac_alg' is
used.
Fixes: 3c68198e75 ("sctp: Make hmac algorithm selection for cookie generation dynamic")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/67769ecb.050a0220.3a8527.003f.GAE@google.com [1]
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-4-5df34b2083e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As mentioned in the previous commit, using the 'net' structure via
'current' is not recommended for different reasons:
- Inconsistency: getting info from the reader's/writer's netns vs only
from the opener's netns.
- current->nsproxy can be NULL in some cases, resulting in an 'Oops'
(null-ptr-deref), e.g. when the current task is exiting, as spotted by
syzbot [1] using acct(2).
The 'pernet' structure can be obtained from the table->data using
container_of().
Fixes: 27069e7cb3 ("mptcp: disable active MPTCP in case of blackhole")
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/67769ecb.050a0220.3a8527.003f.GAE@google.com [1]
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-3-5df34b2083e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'net.mptcp.available_schedulers' sysctl knob is there to list available
schedulers, not to modify this list.
There are then no reasons to give write access to it.
Nothing would have been written anyway, but no errors would have been
returned, which is unexpected.
Fixes: 73c900aa36 ("mptcp: add net.mptcp.available_schedulers")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-1-5df34b2083e8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
