[ Upstream commit 5bc3e720e7 ]
This was apparently accounted for in dt-bindings, but never made its
way into the driver.
Fix it for SC8280XP and its VDD_GFX-less cousin, SA8540P.
Fixes: f68f1cb343 ("soc: qcom: rpmhpd: add sc8280xp & sa8540p rpmh power-domains")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20251202-topic-8280_mxc-v2-2-46cdf47a829e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45e1be5dde ]
Not sure how useful it's gonna be in practice, but the definition is
missing (unlike the previously-unused SC8280XP_MXC-non-_AO), so add it
to allow the driver to create the corresponding pmdomain.
Fixes: dbfb5f94e0 ("dt-bindings: power: rpmpd: Add sc8280xp RPMh power-domains")
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20251202-topic-8280_mxc-v2-1-46cdf47a829e@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Stable-dep-of: 5bc3e720e7 ("pmdomain: qcom: rpmhpd: Add MXC to SC8280XP")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcb8d01b65 ]
Historically both RPM and RPMh domain definitions were a part of the
same, qcom-rpmpd.h header. Now as we have a separate header for RPMh
definitions, qcom,rpmhpd.h, move all RPMh power domain definitions to
that header.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20250718-rework-rpmhpd-rpmpd-v1-1-eedca108e540@oss.qualcomm.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Stable-dep-of: 5bc3e720e7 ("pmdomain: qcom: rpmhpd: Add MXC to SC8280XP")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76868642e4 ]
PTP Hardware Clocks no longer require WRITE permission to perform
readonly operations, such as listing device capabilities or listening to
EXTTS events once they have been enabled by a process with WRITE
permissions.
Add '-r' option to testptp to open the PHC in readonly mode instead of
the default read-write mode. Skip enabling EXTTS if readonly mode is
requested.
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Wojtek Wasko <wwasko@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d07b691ee ]
With the inclusion of commit c259acab83 ("ptp/ioctl: support
MONOTONIC{,_RAW} timestamps for PTP_SYS_OFFSET_EXTENDED") clock_gettime()
now allows retrieval of pre/post timestamps for CLOCK_MONOTONIC and
CLOCK_MONOTONIC_RAW timebases along with the previously supported
CLOCK_REALTIME.
This patch adds a command line option 'y' to the testptp program to
choose one of the allowed timebases [realtime aka system, monotonic,
and monotonic-raw).
Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Link: https://patch.msgid.link/20241003101506.769418-1-maheshb@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 76868642e4 ("testptp: Add option to open PHC in readonly mode")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4e53b15c0 ]
Many devices implement highly accurate clocks, which the kernel manages
as PTP Hardware Clocks (PHCs). Userspace applications rely on these
clocks to timestamp events, trace workload execution, correlate
timescales across devices, and keep various clocks in sync.
The kernel’s current implementation of PTP clocks does not enforce file
permissions checks for most device operations except for POSIX clock
operations, where file mode is verified in the POSIX layer before
forwarding the call to the PTP subsystem. Consequently, it is common
practice to not give unprivileged userspace applications any access to
PTP clocks whatsoever by giving the PTP chardevs 600 permissions. An
example of users running into this limitation is documented in [1].
Additionally, POSIX layer requires WRITE permission even for readonly
adjtime() calls which are used in PTP layer to return current frequency
offset applied to the PHC.
Add permission checks for functions that modify the state of a PTP
device. Continue enforcing permission checks for POSIX clock operations
(settime, adjtime) in the POSIX layer. Only require WRITE access for
dynamic clocks adjtime() if any flags are set in the modes field.
[1] https://lists.nwtime.org/sympa/arc/linuxptp-users/2024-01/msg00036.html
Changes in v4:
- Require FMODE_WRITE in ajtime() only for calls modifying the clock in
any way.
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Wojtek Wasko <wwasko@nvidia.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e859d375d1 ]
File descriptor based pc_clock_*() operations of dynamic posix clocks
have access to the file pointer and implement permission checks in the
generic code before invoking the relevant dynamic clock callback.
Character device operations (open, read, poll, ioctl) do not implement a
generic permission control and the dynamic clock callbacks have no
access to the file pointer to implement them.
Extend struct posix_clock_context with a struct file pointer and
initialize it in posix_clock_open(), so that all dynamic clock callbacks
can access it.
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Wojtek Wasko <wwasko@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4c80187001 upstream.
Handle more gracefully cases where no SRAT information is available, like
in VMs with no Numa support, and allow fake-numa configuration to complete
successfully in these cases
Link: https://lkml.kernel.org/r/20250127171623.1523171-1-bfaccini@nvidia.com
Fixes: 63db8170bf (“mm/fake-numa: allow later numa node hotplug”)
Signed-off-by: Bruno Faccini <bfaccini@nvidia.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hyeonggon Yoo <hyeonggon.yoo@sk.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Len Brown <lenb@kernel.org>
Cc: "Mike Rapoport (IBM)" <rppt@kernel.org>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 038a102535 ]
The kernel test robot has reported:
BUG: spinlock trylock failure on UP on CPU#0, kcompactd0/28
lock: 0xffff888807e35ef0, .magic: dead4ead, .owner: kcompactd0/28, .owner_cpu: 0
CPU: 0 UID: 0 PID: 28 Comm: kcompactd0 Not tainted 6.18.0-rc5-00127-ga06157804399 #1 PREEMPT 8cc09ef94dcec767faa911515ce9e609c45db470
Call Trace:
<IRQ>
__dump_stack (lib/dump_stack.c:95)
dump_stack_lvl (lib/dump_stack.c:123)
dump_stack (lib/dump_stack.c:130)
spin_dump (kernel/locking/spinlock_debug.c:71)
do_raw_spin_trylock (kernel/locking/spinlock_debug.c:?)
_raw_spin_trylock (include/linux/spinlock_api_smp.h:89 kernel/locking/spinlock.c:138)
__free_frozen_pages (mm/page_alloc.c:2973)
___free_pages (mm/page_alloc.c:5295)
__free_pages (mm/page_alloc.c:5334)
tlb_remove_table_rcu (include/linux/mm.h:? include/linux/mm.h:3122 include/asm-generic/tlb.h:220 mm/mmu_gather.c:227 mm/mmu_gather.c:290)
? __cfi_tlb_remove_table_rcu (mm/mmu_gather.c:289)
? rcu_core (kernel/rcu/tree.c:?)
rcu_core (include/linux/rcupdate.h:341 kernel/rcu/tree.c:2607 kernel/rcu/tree.c:2861)
rcu_core_si (kernel/rcu/tree.c:2879)
handle_softirqs (arch/x86/include/asm/jump_label.h:36 include/trace/events/irq.h:142 kernel/softirq.c:623)
__irq_exit_rcu (arch/x86/include/asm/jump_label.h:36 kernel/softirq.c:725)
irq_exit_rcu (kernel/softirq.c:741)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1052)
</IRQ>
<TASK>
RIP: 0010:_raw_spin_unlock_irqrestore (arch/x86/include/asm/preempt.h:95 include/linux/spinlock_api_smp.h:152 kernel/locking/spinlock.c:194)
free_pcppages_bulk (mm/page_alloc.c:1494)
drain_pages_zone (include/linux/spinlock.h:391 mm/page_alloc.c:2632)
__drain_all_pages (mm/page_alloc.c:2731)
drain_all_pages (mm/page_alloc.c:2747)
kcompactd (mm/compaction.c:3115)
kthread (kernel/kthread.c:465)
? __cfi_kcompactd (mm/compaction.c:3166)
? __cfi_kthread (kernel/kthread.c:412)
ret_from_fork (arch/x86/kernel/process.c:164)
? __cfi_kthread (kernel/kthread.c:412)
ret_from_fork_asm (arch/x86/entry/entry_64.S:255)
</TASK>
Matthew has analyzed the report and identified that in drain_page_zone()
we are in a section protected by spin_lock(&pcp->lock) and then get an
interrupt that attempts spin_trylock() on the same lock. The code is
designed to work this way without disabling IRQs and occasionally fail the
trylock with a fallback. However, the SMP=n spinlock implementation
assumes spin_trylock() will always succeed, and thus it's normally a
no-op. Here the enabled lock debugging catches the problem, but otherwise
it could cause a corruption of the pcp structure.
The problem has been introduced by commit 5749077415 ("mm/page_alloc:
leave IRQs enabled for per-cpu page allocations"). The pcp locking scheme
recognizes the need for disabling IRQs to prevent nesting spin_trylock()
sections on SMP=n, but the need to prevent the nesting in spin_lock() has
not been recognized. Fix it by introducing local wrappers that change the
spin_lock() to spin_lock_iqsave() with SMP=n and use them in all places
that do spin_lock(&pcp->lock).
[vbabka@suse.cz: add pcp_ prefix to the spin_lock_irqsave wrappers, per Steven]
Link: https://lkml.kernel.org/r/20260105-fix-pcp-up-v1-1-5579662d2071@suse.cz
Fixes: 5749077415 ("mm/page_alloc: leave IRQs enabled for per-cpu page allocations")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202512101320.e2f2dd6f-lkp@intel.com
Analyzed-by: Matthew Wilcox <willy@infradead.org>
Link: https://lore.kernel.org/all/aUW05pyc9nZkvY-1@casper.infradead.org/
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit fc4b909c36 ]
It is possible for pcp->count - pcp->high to exceed pcp->batch by a lot.
When this happens, we should perform batching to ensure that
free_pcppages_bulk isn't called with too many pages to free at once and
starve out other threads that need the pcp or zone lock.
Since we are still only freeing the difference between the initial
pcp->count and pcp->high values, there should be no change to how many
pages are freed.
Link: https://lkml.kernel.org/r/20251014145011.3427205-3-joshua.hahnjy@gmail.com
Signed-off-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Suggested-by: Chris Mason <clm@fb.com>
Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Co-developed-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@suse.com>
Cc: SeongJae Park <sj@kernel.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 038a102535 ("mm/page_alloc: prevent pcp corruption with SMP=n")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0acc67c403 ]
Patch series "mm/page_alloc: Batch callers of free_pcppages_bulk", v5.
Motivation & Approach
=====================
While testing workloads with high sustained memory pressure on large
machines in the Meta fleet (1Tb memory, 316 CPUs), we saw an unexpectedly
high number of softlockups. Further investigation showed that the zone
lock in free_pcppages_bulk was being held for a long time, and was called
to free 2k+ pages over 100 times just during boot.
This causes starvation in other processes for the zone lock, which can
lead to the system stalling as multiple threads cannot make progress
without the locks. We can see these issues manifesting as warnings:
[ 4512.591979] rcu: INFO: rcu_sched self-detected stall on CPU
[ 4512.604370] rcu: 20-....: (9312 ticks this GP) idle=a654/1/0x4000000000000000 softirq=309340/309344 fqs=5426
[ 4512.626401] rcu: hardirqs softirqs csw/system
[ 4512.638793] rcu: number: 0 145 0
[ 4512.651177] rcu: cputime: 30 10410 174 ==> 10558(ms)
[ 4512.666657] rcu: (t=21077 jiffies g=783665 q=1242213 ncpus=316)
While these warnings don't indicate a crash or a kernel panic, they do
point to the underlying issue of lock contention. To prevent starvation
in both locks, batch the freeing of pages using pcp->batch.
Because free_pcppages_bulk is called with the pcp lock and acquires the
zone lock, relinquishing and reacquiring the locks are only effective when
both of them are broken together (unless the system was built with queued
spinlocks). Thus, instead of modifying free_pcppages_bulk to break both
locks, batch the freeing from its callers instead.
A similar fix has been implemented in the Meta fleet, and we have seen
significantly less softlockups.
Testing
=======
The following are a few synthetic benchmarks, made on three machines. The
first is a large machine with 754GiB memory and 316 processors.
The second is a relatively smaller machine with 251GiB memory and 176
processors. The third and final is the smallest of the three, which has 62GiB
memory and 36 processors.
On all machines, I kick off a kernel build with -j$(nproc).
Negative delta is better (faster compilation).
Large machine (754GiB memory, 316 processors)
make -j$(nproc)
+------------+---------------+-----------+
| Metric (s) | Variation (%) | Delta(%) |
+------------+---------------+-----------+
| real | 0.8070 | - 1.4865 |
| user | 0.2823 | + 0.4081 |
| sys | 5.0267 | -11.8737 |
+------------+---------------+-----------+
Medium machine (251GiB memory, 176 processors)
make -j$(nproc)
+------------+---------------+----------+
| Metric (s) | Variation (%) | Delta(%) |
+------------+---------------+----------+
| real | 0.2806 | +0.0351 |
| user | 0.0994 | +0.3170 |
| sys | 0.6229 | -0.6277 |
+------------+---------------+----------+
Small machine (62GiB memory, 36 processors)
make -j$(nproc)
+------------+---------------+----------+
| Metric (s) | Variation (%) | Delta(%) |
+------------+---------------+----------+
| real | 0.1503 | -2.6585 |
| user | 0.0431 | -2.2984 |
| sys | 0.1870 | -3.2013 |
+------------+---------------+----------+
Here, variation is the coefficient of variation, i.e. standard deviation
/ mean.
Based on these results, it seems like there are varying degrees to how
much lock contention this reduces. For the largest and smallest machines
that I ran the tests on, it seems like there is quite some significant
reduction. There is also some performance increases visible from
userspace.
Interestingly, the performance gains don't scale with the size of the
machine, but rather there seems to be a dip in the gain there is for the
medium-sized machine. One possible theory is that because the high
watermark depends on both memory and the number of local CPUs, what
impacts zone contention the most is not these individual values, but
rather the ratio of mem:processors.
This patch (of 5):
Currently, refresh_cpu_vm_stats returns an int, indicating how many
changes were made during its updates. Using this information, callers
like vmstat_update can heuristically determine if more work will be done
in the future.
However, all of refresh_cpu_vm_stats's callers either (a) ignore the
result, only caring about performing the updates, or (b) only care about
whether changes were made, but not *how many* changes were made.
Simplify the code by returning a bool instead to indicate if updates
were made.
In addition, simplify fold_diff and decay_pcp_high to return a bool
for the same reason.
Link: https://lkml.kernel.org/r/20251014145011.3427205-1-joshua.hahnjy@gmail.com
Link: https://lkml.kernel.org/r/20251014145011.3427205-2-joshua.hahnjy@gmail.com
Signed-off-by: Joshua Hahn <joshua.hahnjy@gmail.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: SeongJae Park <sj@kernel.org>
Cc: Brendan Jackman <jackmanb@google.com>
Cc: Chris Mason <clm@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stable-dep-of: 038a102535 ("mm/page_alloc: prevent pcp corruption with SMP=n")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b18cd8b210 ]
When fsl_edma_alloc_chan_resources() fails after clk_prepare_enable(),
the error paths only free IRQs and destroy the TCD pool, but forget to
call clk_disable_unprepare(). This causes the channel clock to remain
enabled, leaking power and resources.
Fix it by disabling the channel clock in the error unwind path.
Fixes: d8d4355861 ("dmaengine: fsl-edma: add i.MX8ULP edma support")
Cc: stable@vger.kernel.org
Suggested-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Zhen Ni <zhen.ni@easystack.cn>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/20251014090522.827726-1-zhen.ni@easystack.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
[ Different error handling scheme ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e07dea3de5 ]
The for_each_available_child_of_node() calls of_node_put() to
release child_np in each success loop. After breaking from the
loop with the child_np has been released, the code will jump to
the put_child label and will call the of_node_put() again if the
devm_request_threaded_irq() fails. These cause a double free bug.
Fix by returning directly to avoid the duplicate of_node_put().
Fixes: ed2b5a8e6b ("phy: phy-rockchip-inno-usb2: support muxed interrupts")
Cc: stable@vger.kernel.org
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260109154626.2452034-1-vulab@iscas.ac.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f46c26f1bc ]
The 'numa_nodes_parsed' is defined in <asm/numa.h> but this file
is not included in mm/numa_memblks.c (build x86_64) so add this
to the incldues to fix the following sparse warning:
mm/numa_memblks.c:13:12: warning: symbol 'numa_nodes_parsed' was not declared. Should it be static?
Link: https://lkml.kernel.org/r/20260108101539.229192-1-ben.dooks@codethink.co.uk
Fixes: 8748270821 ("mm: introduce numa_memblks")
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4795d205d7 ]
kmsan_free_page() is called by the page allocator's free_pages_prepare()
during page freeing. Its job is to poison all the memory covered by the
page. It can be called with an order-0 page, a compound high-order page
or a non-compound high-order page. But page_size() only works for order-0
and compound pages. For a non-compound high-order page it will
incorrectly return PAGE_SIZE.
The implication is that the tail pages of a high-order non-compound page
do not get poisoned at free, so any invalid access while they are free
could go unnoticed. It looks like the pages will be poisoned again at
allocation time, so that would bookend the window.
Fix this by using the order parameter to calculate the size.
Link: https://lkml.kernel.org/r/20260104134348.3544298-1-ryan.roberts@arm.com
Fixes: b073d7f8ae ("mm: kmsan: maintain KMSAN metadata for page operations")
Signed-off-by: Ryan Roberts <ryan.roberts@arm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Tested-by: Alexander Potapenko <glider@google.com>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[ Adjust context ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ba578b87fe upstream.
This patch adds selftests to cover invalid narrower loads on the
context. These used to cause kernel warnings before the previous patch.
To trigger the warning, the load had to be aligned, to read an affected
context field (ex., skb->sk), and not starting at the beginning of the
field.
The nine new cases all fail without the previous patch.
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/44cd83ea9c6868079943f0a436c6efa850528cc1.1753194596.git.paul.chaignon@gmail.com
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e09299225d upstream.
The following BPF program, simplified from a syzkaller repro, causes a
kernel warning:
r0 = *(u8 *)(r1 + 169);
exit;
With pointer field sk being at offset 168 in __sk_buff. This access is
detected as a narrower read in bpf_skb_is_valid_access because it
doesn't match offsetof(struct __sk_buff, sk). It is therefore allowed
and later proceeds to bpf_convert_ctx_access. Note that for the
"is_narrower_load" case in the convert_ctx_accesses(), the insn->off
is aligned, so the cnt may not be 0 because it matches the
offsetof(struct __sk_buff, sk) in the bpf_convert_ctx_access. However,
the target_size stays 0 and the verifier errors with a kernel warning:
verifier bug: error during ctx access conversion(1)
This patch fixes that to return a proper "invalid bpf_context access
off=X size=Y" error on the load instruction.
The same issue affects multiple other fields in context structures that
allow narrow access. Some other non-affected fields (for sk_msg,
sk_lookup, and sockopt) were also changed to use bpf_ctx_range_ptr for
consistency.
Note this syzkaller crash was reported in the "Closes" link below, which
used to be about a different bug, fixed in
commit fce7bd8e38 ("bpf/verifier: Handle BPF_LOAD_ACQ instructions
in insn_def_regno()"). Because syzbot somehow confused the two bugs,
the new crash and repro didn't get reported to the mailing list.
Fixes: f96da09473 ("bpf: simplify narrower ctx access")
Fixes: 0df1a55afa ("bpf: Warn on internal verifier errors")
Reported-by: syzbot+0ef84a7bdf5301d4cbec@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=0ef84a7bdf5301d4cbec
Signed-off-by: Paul Chaignon <paul.chaignon@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://patch.msgid.link/3b8dcee67ff4296903351a974ddd9c4dca768b64.1753194596.git.paul.chaignon@gmail.com
Signed-off-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 392b3d9d59 upstream.
When a DAMOS-scheme DAMON sysfs directory setup fails after setup of
access_pattern/ directory, subdirectories of access_pattern/ directory are
not cleaned up. As a result, DAMON sysfs interface is nearly broken until
the system reboots, and the memory for the unremoved directory is leaked.
Cleanup the directories under such failures.
Link: https://lkml.kernel.org/r/20251225023043.18579-5-sj@kernel.org
Fixes: 9bbb820a5b ("mm/damon/sysfs: support DAMOS quotas")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: chongjiapeng <jiapeng.chong@linux.alibaba.com>
Cc: <stable@vger.kernel.org> # 5.18.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc7e1d75fd upstream.
When a DAMOS-scheme DAMON sysfs directory setup fails after setup of
quotas/ directory, subdirectories of quotas/ directory are not cleaned up.
As a result, DAMON sysfs interface is nearly broken until the system
reboots, and the memory for the unremoved directory is leaked.
Cleanup the directories under such failures.
Link: https://lkml.kernel.org/r/20251225023043.18579-4-sj@kernel.org
Fixes: 1b32234ab0 ("mm/damon/sysfs: support DAMOS watermarks")
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: chongjiapeng <jiapeng.chong@linux.alibaba.com>
Cc: <stable@vger.kernel.org> # 5.18.x
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c360004c01 upstream.
Sparse inode cluster allocation sets min/max agbno values to avoid
allocating an inode cluster that might map to an invalid inode
chunk. For example, we can't have an inode record mapped to agbno 0
or that extends past the end of a runt AG of misaligned size.
The initial calculation of max_agbno is unnecessarily conservative,
however. This has triggered a corner case allocation failure where a
small runt AG (i.e. 2063 blocks) is mostly full save for an extent
to the EOFS boundary: [2050,13]. max_agbno is set to 2048 in this
case, which happens to be the offset of the last possible valid
inode chunk in the AG. In practice, we should be able to allocate
the 4-block cluster at agbno 2052 to map to the parent inode record
at agbno 2048, but the max_agbno value precludes it.
Note that this can result in filesystem shutdown via dirty trans
cancel on stable kernels prior to commit 9eb775968b ("xfs: walk
all AGs if TRYLOCK passed to xfs_alloc_vextent_iterate_ags") because
the tail AG selection by the allocator sets t_highest_agno on the
transaction. If the inode allocator spins around and finds an inode
chunk with free inodes in an earlier AG, the subsequent dir name
creation path may still fail to allocate due to the AG restriction
and cancel.
To avoid this problem, update the max_agbno calculation to the agbno
prior to the last chunk aligned agbno in the AG. This is not
necessarily the last valid allocation target for a sparse chunk, but
since inode chunks (i.e. records) are chunk aligned and sparse
allocs are cluster sized/aligned, this allows the sb_spino_align
alignment restriction to take over and round down the max effective
agbno to within the last valid inode chunk in the AG.
Note that even though the allocator improvements in the
aforementioned commit seem to avoid this particular dirty trans
cancel situation, the max_agbno logic improvement still applies as
we should be able to allocate from an AG that has been appropriately
selected. The more important target for this patch however are
older/stable kernels prior to this allocator rework/improvement.
Cc: stable@vger.kernel.org # v4.2
Fixes: 56d1115c9b ("xfs: allocate sparse inode chunks on full chunk allocation failure")
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5037b34282 upstream.
When wait_current_trans() is called during start_transaction(), it
currently waits for a blocked transaction without considering whether
the given transaction type actually needs to wait for that particular
transaction state. The btrfs_blocked_trans_types[] array already defines
which transaction types should wait for which transaction states, but
this check was missing in wait_current_trans().
This can lead to a deadlock scenario involving two transactions and
pending ordered extents:
1. Transaction A is in TRANS_STATE_COMMIT_DOING state
2. A worker processing an ordered extent calls start_transaction()
with TRANS_JOIN
3. join_transaction() returns -EBUSY because Transaction A is in
TRANS_STATE_COMMIT_DOING
4. Transaction A moves to TRANS_STATE_UNBLOCKED and completes
5. A new Transaction B is created (TRANS_STATE_RUNNING)
6. The ordered extent from step 2 is added to Transaction B's
pending ordered extents
7. Transaction B immediately starts commit by another task and
enters TRANS_STATE_COMMIT_START
8. The worker finally reaches wait_current_trans(), sees Transaction B
in TRANS_STATE_COMMIT_START (a blocked state), and waits
unconditionally
9. However, TRANS_JOIN should NOT wait for TRANS_STATE_COMMIT_START
according to btrfs_blocked_trans_types[]
10. Transaction B is waiting for pending ordered extents to complete
11. Deadlock: Transaction B waits for ordered extent, ordered extent
waits for Transaction B
This can be illustrated by the following call stacks:
CPU0 CPU1
btrfs_finish_ordered_io()
start_transaction(TRANS_JOIN)
join_transaction()
# -EBUSY (Transaction A is
# TRANS_STATE_COMMIT_DOING)
# Transaction A completes
# Transaction B created
# ordered extent added to
# Transaction B's pending list
btrfs_commit_transaction()
# Transaction B enters
# TRANS_STATE_COMMIT_START
# waiting for pending ordered
# extents
wait_current_trans()
# waits for Transaction B
# (should not wait!)
Task bstore_kv_sync in btrfs_commit_transaction waiting for ordered
extents:
__schedule+0x2e7/0x8a0
schedule+0x64/0xe0
btrfs_commit_transaction+0xbf7/0xda0 [btrfs]
btrfs_sync_file+0x342/0x4d0 [btrfs]
__x64_sys_fdatasync+0x4b/0x80
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Task kworker in wait_current_trans waiting for transaction commit:
Workqueue: btrfs-syno_nocow btrfs_work_helper [btrfs]
__schedule+0x2e7/0x8a0
schedule+0x64/0xe0
wait_current_trans+0xb0/0x110 [btrfs]
start_transaction+0x346/0x5b0 [btrfs]
btrfs_finish_ordered_io.isra.0+0x49b/0x9c0 [btrfs]
btrfs_work_helper+0xe8/0x350 [btrfs]
process_one_work+0x1d3/0x3c0
worker_thread+0x4d/0x3e0
kthread+0x12d/0x150
ret_from_fork+0x1f/0x30
Fix this by passing the transaction type to wait_current_trans() and
checking btrfs_blocked_trans_types[cur_trans->state] against the given
type before deciding to wait. This ensures that transaction types which
are allowed to join during certain blocked states will not unnecessarily
wait and cause deadlocks.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Robbie Ko <robbieko@synology.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Cc: Motiejus Jakštys <motiejus@jakstys.lt>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3644f44117 upstream.
Clang warns (or errors with CONFIG_WERROR=y / W=e):
drivers/hid/intel-ish-hid/ipc/ipc.c:935:36: error: cast from 'void (*)(struct workqueue_struct *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
935 | if (devm_add_action_or_reset(dev, (void (*)(void *))destroy_workqueue,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/linux/device/devres.h:168:34: note: expanded from macro 'devm_add_action_or_reset'
168 | __devm_add_action_or_ireset(dev, action, data, #action)
| ^~~~~~
This warning is pointing out a kernel control flow integrity (kCFI /
CONFIG_CFI=y) violation will occur due to this function cast when the
destroy_workqueue() is indirectly called via devm_action_release()
because the prototype of destroy_workqueue() does not match the
prototype of (*action)().
Use a local function with the correct prototype to wrap
destroy_workqueue() to resolve the warning and CFI violation.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202510190103.qTZvfdjj-lkp@intel.com/
Closes: https://github.com/ClangBuiltLinux/linux/issues/2139
Fixes: 0d30dae38f ("HID: intel-ish-hid: Use dedicated unbound workqueues to prevent resume blocking")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Zhang Lixu <lixu.zhang@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0d30dae38f upstream.
During suspend/resume tests with S2IDLE, some ISH functional failures were
observed because of delay in executing ISH resume handler. Here
schedule_work() is used from resume handler to do actual work.
schedule_work() uses system_wq, which is a per CPU work queue. Although
the queuing is not bound to a CPU, but it prefers local CPU of the caller,
unless prohibited.
Users of this work queue are not supposed to queue long running work.
But in practice, there are scenarios where long running work items are
queued on other unbound workqueues, occupying the CPU. As a result, the
ISH resume handler may not get a chance to execute in a timely manner.
In one scenario, one of the ish_resume_handler() executions was delayed
nearly 1 second because another work item on an unbound workqueue occupied
the same CPU. This delay causes ISH functionality failures.
A similar issue was previously observed where the ISH HID driver timed out
while getting the HID descriptor during S4 resume in the recovery kernel,
likely caused by the same workqueue contention problem.
Create dedicated unbound workqueues for all ISH operations to allow work
items to execute on any available CPU, eliminating CPU-specific bottlenecks
and improving resume reliability under varying system loads. Also ISH has
three different components, a bus driver which implements ISH protocols, a
PCI interface layer and HID interface. Use one dedicated work queue for all
of them.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 430f7803b6 upstream.
Make sure to drop the reference taken when looking up the UDMA platform
device.
Note that holding a reference to a platform device does not prevent its
driver data from going away so there is no point in keeping the
reference after the lookup helper returns.
Fixes: d702419134 ("dmaengine: ti: k3-udma: Add glue layer for non DMAengine users")
Fixes: 1438cde8fe ("dmaengine: ti: k3-udma: add missing put_device() call in of_xudma_dev_get()")
Cc: stable@vger.kernel.org # 5.6: 1438cde8fe
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251117161258.10679-17-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4fc17b1c6d upstream.
Make sure to drop the reference taken when looking up the crossbar
platform device during am335x route allocation.
Fixes: 42dbdcc6bf ("dmaengine: ti-dma-crossbar: Add support for crossbar on AM33xx/AM43xx")
Cc: stable@vger.kernel.org # 4.4
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251117161258.10679-15-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc7e44db01 upstream.
Make sure to drop the reference taken when looking up the crossbar
platform device during dra7x route allocation.
Note that commit 615a4bfc42 ("dmaengine: ti: Add missing put_device in
ti_dra7_xbar_route_allocate") fixed the leak in the error paths but the
reference is still leaking on successful allocation.
Fixes: a074ae38f8 ("dmaengine: Add driver for TI DMA crossbar on DRA7x")
Fixes: 615a4bfc42 ("dmaengine: ti: Add missing put_device in ti_dra7_xbar_route_allocate")
Cc: stable@vger.kernel.org # 4.2: 615a4bfc42
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Cc: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251117161258.10679-14-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b1b590a590 upstream.
Make sure to drop the reference taken to the DMA master OF node also on
late route allocation failures.
Fixes: df7e762db5 ("dmaengine: Add STM32 DMAMUX driver")
Cc: stable@vger.kernel.org # 4.15
Cc: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://patch.msgid.link/20251117161258.10679-12-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd6e494388 upstream.
Make sure to drop the reference taken when looking up the DMA mux
platform device during route allocation.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Fixes: df7e762db5 ("dmaengine: Add STM32 DMAMUX driver")
Cc: stable@vger.kernel.org # 4.15
Cc: Pierre-Yves MORDRET <pierre-yves.mordret@foss.st.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Amelie Delaunay <amelie.delaunay@foss.st.com>
Link: https://patch.msgid.link/20251117161258.10679-11-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 747213b08a upstream.
After audio full duplex testing, playing the recorded file contains a few
playback frames from the previous time. The rz_dmac_terminate_all() does
not reset all the hardware descriptors queued previously, leading to the
wrong descriptor being picked up during the next DMA transfer. Fix the
above issue by resetting all the descriptor headers for a channel in
rz_dmac_terminate_all() as rz_dmac_lmdesc_recycle() points to the proper
descriptor header filled by the rz_dmac_prepare_descs_for_slave_sg().
Cc: stable@kernel.org
Fixes: 5000d37042 ("dmaengine: sh: Add DMAC driver for RZ/G2L SoC")
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20251113195052.564338-1-biju.das.jz@bp.renesas.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3f747004bb upstream.
Fix a memory leak in gpi_peripheral_config() where the original memory
pointed to by gchan->config could be lost if krealloc() fails.
The issue occurs when:
1. gchan->config points to previously allocated memory
2. krealloc() fails and returns NULL
3. The function directly assigns NULL to gchan->config, losing the
reference to the original memory
4. The original memory becomes unreachable and cannot be freed
Fix this by using a temporary variable to hold the krealloc() result
and only updating gchan->config when the allocation succeeds.
Found via static analysis and code review.
Fixes: 5d0c3533a1 ("dmaengine: qcom: Add GPI dma driver")
Cc: stable@vger.kernel.org
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Link: https://patch.msgid.link/20251029123421.91973-1-linmq006@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d9847e6d1d upstream.
Make sure to drop the reference taken when looking up the DMA mux
platform device during route allocation.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Fixes: 5d318b5959 ("dmaengine: Add dma router for pl08x in LPC32XX SoC")
Cc: stable@vger.kernel.org # 6.12
Cc: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251117161258.10679-9-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d4d63059de upstream.
Make sure to drop the reference taken when looking up the DMA mux
platform device during route allocation.
Note that holding a reference to a device does not prevent its driver
data from going away so there is no point in keeping the reference.
Fixes: e5f4ae84be ("dmaengine: add driver for lpc18xx dmamux")
Cc: stable@vger.kernel.org # 4.3
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://patch.msgid.link/20251117161258.10679-8-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 799900f017 upstream.
Make sure to drop the reference taken when looking up the idxd device as
part of the compat bind and unbind sysfs interface.
Fixes: 6e7f3ee97b ("dmaengine: idxd: move dsa_drv support to compatible mode")
Cc: stable@vger.kernel.org # 5.15
Cc: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251117161258.10679-7-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ec25e60f9f upstream.
Make sure to drop the reference taken to the DMA master OF node also on
late route allocation failures.
Fixes: 134d9c52fc ("dmaengine: dw: dmamux: Introduce RZN1 DMA router support")
Cc: stable@vger.kernel.org # 5.19
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://patch.msgid.link/20251117161258.10679-6-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c3a46ebf1 upstream.
Make sure to drop the reference taken when looking up the mailbox device
during probe on probe failures and on driver unbind.
Fixes: 743e1c8ffe ("dmaengine: Add Broadcom SBA RAID driver")
Cc: stable@vger.kernel.org # 4.13
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251117161258.10679-4-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9074b2d7a upstream.
Make sure to drop the reference taken when looking up the DMA platform
device during of_dma_xlate() when releasing channel resources.
Note that commit 3832b78b3e ("dmaengine: at_hdmac: add missing
put_device() call in at_dma_xlate()") fixed the leak in a couple of
error paths but the reference is still leaking on successful allocation.
Fixes: bbe89c8e3d ("at_hdmac: move to generic DMA binding")
Fixes: 3832b78b3e ("dmaengine: at_hdmac: add missing put_device() call in at_dma_xlate()")
Cc: stable@vger.kernel.org # 3.10: 3832b78b3e
Cc: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Link: https://patch.msgid.link/20251117161258.10679-2-johan@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e65df3f77e upstream.
Add missing address-cells 0 to the Local I/O, Extend I/O and PCH-PIC
Interrupt Controller node to silence W=1 warning:
loongson-2k2000.dtsi:364.5-49: Warning (interrupt_map): /bus@10000000/pcie@1a000000/pcie@9,0:interrupt-map:
Missing property '#address-cells' in node /bus@10000000/interrupt-controller@10000000, using 0 as fallback
Value '0' is correct because:
1. The LIO/EIO/PCH interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Cc: stable@vger.kernel.org
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 14ea5a3625 upstream.
The binding wants the node to be named "i2c-number", but those are named
"i2c-gpio-number" instead.
Thus rename those to i2c-0, i2c-1 to adhere to the binding and suppress
dtbs_check warnings.
Cc: stable@vger.kernel.org
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 81e8cb7e50 upstream.
Add missing address-cells 0 to the Local I/O interrupt controller node
to silence W=1 warning:
loongson-2k1000.dtsi:498.5-55: Warning (interrupt_map): /bus@10000000/pcie@1a000000/pcie@9,0:interrupt-map:
Missing property '#address-cells' in node /bus@10000000/interrupt-controller@1fe01440, using 0 as fallback
Value '0' is correct because:
1. The Local I/O interrupt controller does not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Cc: stable@vger.kernel.org
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c4461754e6 upstream.
Add missing address-cells 0 to the Local I/O and Extend I/O interrupt
controller node to silence W=1 warning:
loongson-2k0500.dtsi:513.5-51: Warning (interrupt_map): /bus@10000000/pcie@1a000000/pcie@0,0:interrupt-map:
Missing property '#address-cells' in node /bus@10000000/interrupt-controller@1fe11600, using 0 as fallback
Value '0' is correct because:
1. The Local I/O & Extend I/O interrupt controller do not have children,
2. interrupt-map property (in PCI node) consists of five components and
the fourth component "parent unit address", which size is defined by
'#address-cells' of the node pointed to by the interrupt-parent
component, is not used (=0)
Cc: stable@vger.kernel.org
Signed-off-by: Binbin Zhou <zhoubinbin@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bf72b4b7bb upstream.
In vmw_compat_shader_add(), the return value check of vmw_shader_alloc()
is not proper. Modify the check for the return pointer 'res'.
Found by code review and compiled on ubuntu 20.04.
Fixes: 18e4a4669c ("drm/vmwgfx: Fix compat shader namespace")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Zack Rusin <zack.rusin@broadcom.com>
Link: https://patch.msgid.link/20251224091105.1569464-1-lihaoxiang@isrc.iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6ab3d4353b upstream.
The connector type for the DataImage SCF0700C48GGU18 panel is missing and
devm_drm_panel_bridge_add() requires connector type to be set. This leads
to a warning and a backtrace in the kernel log and panel does not work:
"
WARNING: CPU: 3 PID: 38 at drivers/gpu/drm/bridge/panel.c:379 devm_drm_of_get_bridge+0xac/0xb8
"
The warning is triggered by a check for valid connector type in
devm_drm_panel_bridge_add(). If there is no valid connector type
set for a panel, the warning is printed and panel is not added.
Fill in the missing connector type to fix the warning and make
the panel operational once again.
Cc: stable@vger.kernel.org
Fixes: 97ceb1fb08 ("drm/panel: simple: Add support for DataImage SCF0700C48GGU18")
Signed-off-by: Marek Vasut <marex@nabladev.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patch.msgid.link/20260110152750.73848-1-marex@nabladev.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9e9bc6be0f upstream.
For a while, I've been seeing a strange issue where some (usually not all)
of the display DMA channels will suddenly hang, particularly when there is
a visible cursor on the screen that is being frequently updated, and
especially when said cursor happens to go between two screens. While this
brings back lovely memories of fixing Intel Skylake bugs, I would quite
like to fix it :).
It turns out the problem that's happening here is that we're managing to
reach nv50_head_flush_set() in our atomic commit path without actually
holding nv50_disp->mutex. This means that cursor updates happening in
parallel (along with any other atomic updates that need to use the core
channel) will race with eachother, which eventually causes us to corrupt
the pushbuffer - leading to a plethora of various GSP errors, usually:
nouveau 0000:c1:00.0: gsp: Xid:56 CMDre 00000000 00000218 00102680 00000004 00800003
nouveau 0000:c1:00.0: gsp: Xid:56 CMDre 00000000 0000021c 00040509 00000004 00000001
nouveau 0000:c1:00.0: gsp: Xid:56 CMDre 00000000 00000000 00000000 00000001 00000001
The reason this is happening is because generally we check whether we need
to set nv50_atom->lock_core at the end of nv50_head_atomic_check().
However, curs507a_prepare is called from the fb_prepare callback, which
happens after the atomic check phase. As a result, this can lead to commits
that both touch the core channel but also don't grab nv50_disp->mutex.
So, fix this by making sure that we set nv50_atom->lock_core in
cus507a_prepare().
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 1590700d94 ("drm/nouveau/kms/nv50-: split each resource type into their own source files")
Cc: <stable@vger.kernel.org> # v4.18+
Link: https://patch.msgid.link/20251219215344.170852-2-lyude@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80614c5098 upstream.
If dqm->ops.initialize() fails, add deallocate_hiq_sdma_mqd()
to release the memory allocated by allocate_hiq_sdma_mqd().
Move deallocate_hiq_sdma_mqd() up to ensure proper function
visibility at the point of use.
Fixes: 11614c36bc ("drm/amdkfd: Allocate MQD trunk for HIQ and SDMA")
Signed-off-by: Haoxiang Li <lihaoxiang@isrc.iscas.ac.cn>
Signed-off-by: Felix Kuehling <felix.kuehling@amd.com>
Reviewed-by: Oak Zeng <Oak.Zeng@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit b7cccc8286)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
