Change menuconfig to config to keep the Kconfig entries unified. Part of
reorganising wireless drivers directory and Kconfig.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Rename WL_TI to WLAN_VENDOR_TI to match with other vendor configs and make sure
that it's enabled by default in new configs. Convert menuconfigs to regular
configs to unify the wireless drivers menuconfig. Part of reorganising wireless
drivers directory and Kconfig.
Also remove WLCORE dependency to WL_TI. It should not be needed as WLCORE is
already under if WLAN_VENDOR_TI.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Add new a Kconfig file and a vendor config for realtek. Also update MAINTAINERS
which we missed to do when earlier moving rtlwifi.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The permissions in mark_rodata_ro trigger a build error
with STRICT_MM_TYPECHECKS. Fix this by introducing
PAGE_KERNEL_ROX for the same reasons as PAGE_KERNEL_RO.
From Ard:
"PAGE_KERNEL_EXEC has PTE_WRITE set as well, making the range
writeable under the ARMv8.1 DBM feature, that manages the
dirty bit in hardware (writing to a page with the PTE_RDONLY
and PTE_WRITE bits both set will clear the PTE_RDONLY bit in that case)"
Signed-off-by: Laura Abbott <labbott@fedoraproject.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The asynchronous, merged implementations of AES in CBC, CTR and XTS
modes are preferred when available (i.e., when instantiating ablkciphers
explicitly). However, the synchronous core AES cipher combined with the
generic CBC mode implementation will produce a 'cbc(aes)' blkcipher that
is callable asynchronously as well. To prevent this implementation from
being used when the accelerated asynchronous implemenation is also
available, lower its priority to 250 (i.e., below the asynchronous
module's priority of 300).
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Before this patch, we incorrectly enter the guest without requesting an
interrupt window if the IRQ chip is split between user space and the
kernel.
Because lapic_in_kernel no longer implies the PIC is in the kernel, this
patch tests pic_in_kernel to determining whether an interrupt window
should be requested when entering the guest.
If the APIC is in the kernel and we request an interrupt window the
guest will return immediately. If the APIC is masked the guest will not
not make forward progress and unmask it, leading to a loop when KVM
reenters and requests again. This patch adds a check to ensure the APIC
is ready to accept an interrupt before requesting a window.
Reviewed-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Matt Gingell <gingell@google.com>
[Use the other newly introduced functions. - Paolo]
Fixes: 1c1a9ce973
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Set KVM_REQ_EVENT when a PIC in user space injects a local interrupt.
Currently a request is only made when neither the PIC nor the APIC is in
the kernel, which is not sufficient in the split IRQ chip case.
This addresses a problem in QEMU where interrupts are delayed until
another path invokes the event loop.
Reviewed-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Matt Gingell <gingell@google.com>
Fixes: 1c1a9ce973
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch breaks out a new function kvm_vcpu_ready_for_interrupt_injection.
This routine encapsulates the logic required to determine whether a vcpu
is ready to accept an interrupt injection, which is now required on
multiple paths.
Reviewed-by: Steve Rutherford <srutherford@google.com>
Signed-off-by: Matt Gingell <gingell@google.com>
Fixes: 1c1a9ce973
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch ensures that dm_request_for_irq_injection and
post_kvm_run_save are in sync, avoiding that an endless ping-pong
between userspace (who correctly notices that IF=0) and
the kernel (who insists that userspace handles its request
for the interrupt window).
To synchronize them, it also adds checks for kvm_arch_interrupt_allowed
and !kvm_event_needs_reinjection. These are always needed, not
just for in-kernel LAPIC.
Signed-off-by: Matt Gingell <gingell@google.com>
[A collage of two patches from Matt. - Paolo]
Fixes: 1c1a9ce973
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If either of the memory allocations in kvm_arch_vcpu_create() fail, the
vcpu which has been allocated and kvm_vcpu_init'd doesn't get uninit'd
in the error handling path. Add a call to kvm_vcpu_uninit() to fix this.
Fixes: 669e846e6c ("KVM/MIPS32: MIPS arch specific APIs for KVM")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Cc: <stable@vger.kernel.org> # 3.10.x-
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The immediate field of the CACHE instruction is signed, so ensure that
it gets sign extended by casting it to an int16_t rather than just
masking the low 16 bits.
Fixes: e685c689f3 ("KVM/MIPS32: Privileged instruction/target branch emulation.")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Cc: <stable@vger.kernel.org> # 3.10.x-
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
ASID restoration on guest resume should determine the guest execution
mode based on the guest Status register rather than bit 30 of the guest
PC.
Fix the two places in locore.S that do this, loading the guest status
from the cop0 area. Note, this assembly is specific to the trap &
emulate implementation of KVM, so it doesn't need to check the
supervisor bit as that mode is not implemented in the guest.
Fixes: b680f70fc1 ("KVM/MIPS32: Entry point for trampolining to...")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Cc: <stable@vger.kernel.org> # 3.10.x-
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It was created at 'commit aabc95dcf2 (drm/i915: Dont -ETIMEDOUT
on identical new and previous (count, crc).")' becase the counter
wasn't reliable.
Now that we properly wait for the counter to be reset we can rely
a bit more in the counter.
Also that patch stopped to return -ETIMEDOUT so the test case is
unable to skip when it is unreliable and end up in many fails
that should be skip instead.
So, with the counter more reliable we can remove
this hack that just makes things more confusing when test cases
are really expecting the same CRC and let test case skip if that's
not the case.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
According to VESA DP spec TEST_CRC_COUNT (Bits 3:0) at
TEST_SINK_MISC (00246h) is "Reset to 0 when TEST_SINK bit 0 = 0;
So let's give few vblanks so we are really sure that this counter
is really zeroed on the next sink_crc read.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
According to VESA DP Spec, setting TEST_SINK_START (bit 0)
of TEST_SINK (00270h) "Stop/Start calculating CRC on the next frame"
So let's wait at least 1 vblank to really say the calculation
stopped or started.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
As pointed out by Russell King in response to the proposed ARM version
of this code, the sequence to switch between the UEFI runtime mapping
and current's actual userland mapping (and vice versa) is potentially
unsafe, since it leaves a time window between the switch to the new
page tables and the TLB flush where speculative accesses may hit on
stale global TLB entries.
So instead, use non-global mappings, and perform the switch via the
ordinary ASID-aware context switch routines.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Will Deacon <will.deacon@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Part of reorganising wireless drivers directory and Kconfig. Note that I had to
edit Makefiles from subdirectories to use the new location.
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
With gen < 9 we have had always 50Mhz units as our hw
ratio. With gen >= 9 the hw ratio changed to 16.667Mhz (50/3).
The result was that our gpu frequency tracing started to output
values 3 times larger than expected due to hardcoded scaling
value. Fix this by using Use intel_gpu_freq() when generating Mhz
value from ratio for 'intel_gpu_freq_change' trace event.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=92591
Cc: stable@vger.kernel.org # v4.3+
Reported-by: Eero Tamminen <eero.t.tamminen@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1447776866-29384-1-git-send-email-mika.kuoppala@intel.com
of_match_device could return NULL, and so cause a NULL pointer
dereference later.
Reported-by: coverity (CID 1324138)
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
of_match_device could return NULL, and so cause a NULL pointer
dereference later. Renaming tmp_dev to of_id (like all others do) in the
process.
Reported-by: coverity (CID 1324135)
Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
This patch is to support load and unload gadget driver in full OTG mode.
Signed-off-by: Li Jun <jun.li@freescale.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Tested-by: Jiada Wang <jiada_wang@mentor.com>
Cc: <stable@vger.kernel.org> #v4.0+
Since the ci->role will be set after the host role start is complete, there
will be nobody cared irq during start host if usb irq enabled. This error
can be reproduced on i.mx6 sololite EVK board by:
1. disable otg id irq(IDIE) and disable all real otg properties of usbotg1
in dts.
2. boot up the board with ID cable and usb device connected.
3. echo gadget > /sys/kernel/debug/ci_hdrc.0/role
4. echo host > /sys/kernel/debug/ci_hdrc.0/role
5. irq 212: nobody cared.
Cc: <stable@vger.kernel.org> # v3.10+
Signed-off-by: Li Jun <jun.li@freescale.com>
Signed-off-by: Peter Chen <peter.chen@freescale.com>
For imx27, it needs three clocks to let the controller work,
the old code is wrong, and usbmisc has not included clock handling
code any more. Without this patch, it will cause below data
abort when accessing usbmisc registers.
usbcore: registered new interface driver usb-storage
Unhandled fault: external abort on non-linefetch (0x008) at 0xf4424600
pgd = c0004000
[f4424600] *pgd=10000452(bad)
Internal error: : 8 [#1] PREEMPT ARM
Modules linked in:
CPU: 0 PID: 1 Comm: swapper Not tainted 4.1.0-next-20150701-dirty #3089
Hardware name: Freescale i.MX27 (Device Tree Support)
task: c7832b60 ti: c783e000 task.ti: c783e000
PC is at usbmisc_imx27_init+0x4c/0xbc
LR is at usbmisc_imx27_init+0x40/0xbc
pc : [<c03cb5c0>] lr : [<c03cb5b4>] psr: 60000093
sp : c783fe08 ip : 00000000 fp : 00000000
r10: c0576434 r9 : 0000009c r8 : c7a773a0
r7 : 01000000 r6 : 60000013 r5 : c7a776f0 r4 : c7a773f0
r3 : f4424600 r2 : 00000000 r1 : 00000001 r0 : 00000001
Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
Control: 0005317f Table: a0004000 DAC: 00000017
Process swapper (pid: 1, stack limit = 0xc783e190)
Stack: (0xc783fe08 to 0xc7840000)
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Reported-by: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Cc: <stable@vger.kernel.org> #v4.1+
Acked-by: Shawn Guo <shawnguo@kernel.org>
Some i.mx platforms need three clocks to let controller work, but
others only need one, refine clock operation to adapt for all
platforms, it fixes a regression found at i.mx27.
Signed-off-by: Peter Chen <peter.chen@freescale.com>
Tested-by: Fabio Estevam <fabio.estevam@freescale.com>
Cc: <stable@vger.kernel.org> #v4.1+
- Do not change the key of an object in a rbtree, this time it was
the one for DSOs lookup by its long_name, and the noticed symptom was
with 'perf buildid-list --with-hits' (Adrian Hunter)
- 'perf inject' is a pipe, events it doesn't touch should be passed
on, PERF_RECORD_LOST wasn't, fix it (Adrian Hunter)
- Make 'perf buildid-list' request event ordering, as it needs to
first get the mmap events to be able to mark wich DSOs had hits
(Adrian Hunter)
- Fix memory leaks on failure in 'perf probe' (Masami Hiramatsu, Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=wIL5
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
- Do not change the key of an object in a rbtree, this time it was
the one for DSOs lookup by its long_name, and the noticed symptom was
with 'perf buildid-list --with-hits' (Adrian Hunter)
- 'perf inject' is a pipe, events it doesn't touch should be passed
on, PERF_RECORD_LOST wasn't, fix it (Adrian Hunter)
- Make 'perf buildid-list' request event ordering, as it needs to
first get the mmap events to be able to mark wich DSOs had hits
(Adrian Hunter)
- Fix memory leaks on failure in 'perf probe' (Masami Hiramatsu, Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Function nxp_nci_i2c_write currently assumes in case of
I2C bus NACK that the NFC device is in stand-by mode and
will retry the I2C transaction after a pause. This assumes
that the first failed I2C transaction will wake-up the device.
This is done by checking on EREMOTEIO, which is wrong. According
to Documentation/i2c/fault-codes ENXIO shall be used. Unfortunately
the NOACK return code is currently inconsistent across various I2C
host controller drivers. So only check for the generic error case
instead.
This is a temporary fix. As soon as all I2C bus master drivers are
fixed to consistently return 'ENXIO', then we can do the specific
error check again.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This patch correct some representation errors, add a little
clarification in some places, and fix indentation problems
for pseudo code.
It also delete one more white space for one place.
Signed-off-by: Wang YanQing <udknight@gmail.com>
[Brian: a few tweaks]
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
