The commit 26f55386f9 ("arm64/mm: Fix __enable_mmu() for new TGRAN range
values") had already switched into testing ID_AA64MMFR0_TGRAN range values.
This just changes system_supports_[4|16|64]kb_granule() helpers to perform
similar range tests as well. While here, it standardizes page size specific
supported min and max TGRAN values.
Cc: Will Deacon <will@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/1626237975-1909-1-git-send-email-anshuman.khandual@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
The imx_pinctrl_soc_info structure content is never changed, so it can be
declared as 'const', like it is done on all other i.MX pinctrl drivers.
Make it 'const' in this driver too.
Reported-by: Dong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20210716131341.3370620-1-festevam@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The imx_pinctrl_soc_info structure content is never changed, so it can be
declared as 'const', like it is done on all other i.MX pinctrl drivers.
Make it 'const' in this driver too.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Link: https://lore.kernel.org/r/20210713122513.3112941-2-festevam@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The imx_pinctrl_soc_info structure content is never changed, so it can be
declared as 'const', like it is done on all other i.MX pinctrl drivers.
Make it 'const' in this driver too.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com>
Link: https://lore.kernel.org/r/20210713122513.3112941-1-festevam@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The kerneldoc in drm_lease.c is unused because none of the functions
are driver interfaces as the symbols are not exported.
Since they aren't used and much of the existing comments don't provide
any insights (e.g. they just repeat the function name or list out the
function parameters), they should be removed to make them easier to
maintain and to make useful info more obvious.
As a note, many of the comments mention whether idr_mutex should be
held, but these are mostly redundant in cases where the function
contains lockdep assertions or grabs the mutex.
To simplify review, here's the reasoning behind each update.
drm_lease_owner:
function name is self-descriptive
_drm_find_lessee:
function name is self-descriptive
_drm_lease_held_master:
function name and signature are self-descriptive
_drm_has_leased:
kerneldoc is summarized into a comment because the function name could
be interpreted ambiguously (check if the object has been leased VS
check if the master has a lease on the object)
_drm_lease_held:
Retain the idr_mutex comment because the function does not directly
grab the mutex or use a lockdep assertion.
Otherwise, the function name is self-descriptive.
drm_lease_held:
function name is self-descriptive
drm_lease_filter_crtcs:
Kerneldoc is summarized into a comment because the function name could
be interpreted ambiguously (filter leases based on crtcs mask VS
filter crtcs mask based on leases)
drm_lease_create:
Kerneldoc removed.
Useful function details such as atomic leasing are retained.
Errno interpretations are useful and retained.
drm_lease_destroy:
function name is self-descriptive. Additional information is also
removed as they're already present as comments inside the function.
_drm_lease_revoke:
function name is self-descriptive
drm_lease_revoke:
function name is self-descriptive
drm_mode_create_lease_ioctl:
Kerneldoc removed, but useful function details retained.
drm_mode_list_lessees_ioctl:
function name is self-descriptive. Additional details restate what the
code does.
drm_mode_get_lease_ioctl:
Function summary retained to clarify that it's the leased objects that
are returned, not the lease structure.
drm_mode_revoke_lease_ioctl:
Kerneldoc removed, but useful function details retained.
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210730051759.1570630-1-desmondcheongzx@gmail.com
This adds a basic device tree for the Samsung SGH-I407
mobile phone also known as Kyle.
Cc: newbyte@disroot.org
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This adds a devicetree for Samsung GT-I8160 also known as Codina.
Cc: newbyte@disroot.org
Cc: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
No need to hand roll the set_placements stuff, now that we have a helper
for this.
v2: add back the -ENODEV checking since it's possible for stolen to be
probed, and yet still be non-functional
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210729094731.1953091-1-matthew.auld@intel.com
At the moment the AB8500 USB PHY driver still uses the old USB PHY
subsystem instead of the generic PHY subsystem. This means that there
is no explicit link between the USB controller and the USB PHY.
In U-Boot the PHY driver is integrated in the generic PHY subsystem,
so we need to use the typical PHY device tree bindings to specify
which PHY belongs to the USB controller.
Add the link between USB controller and PHY to both ste-ab8500.dtsi
and ste-ab8505.dtsi. This is mainly for U-Boot for now and will just
be ignored in Linux. However, if the AB8500 USB PHY driver in Linux
is moved to the generic PHY subsystem at some point these device tree
changes can be used as well.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
We use the no-sdio and no-sd flags to indicate that these eMMCs
are neither, so that the operating system can skip trying to
identify them as SDIO or SD during boot, which just takes time.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Most architectures do not need a custom implementation, and in most
cases the generic implementation is preferred, so change the polariy
on these Kconfig symbols to require architectures to select them when
they provide their own version.
The new name is CONFIG_ARCH_HAS_{STRNCPY_FROM,STRNLEN}_USER.
The remaining architectures at the moment are: ia64, mips, parisc,
um and xtensa. We should probably convert these as well, but
I was not sure how far to take this series. Thomas Bogendoerfer
had some concerns about converting mips but may still do some
more detailed measurements to see which version is better.
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: linux-ia64@vger.kernel.org
Cc: linux-mips@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Cc: linux-s390@vger.kernel.org
Cc: linux-um@lists.infradead.org
Cc: linux-xtensa@linux-xtensa.org
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Helge Deller <deller@gmx.de> # parisc
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Compiler gcc11, and possibly others, emit a warning when a fall-through
case is found in a switch statement. Add a "fallthrough" statement to
eliminate this warning.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20210729170930.23171-7-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This file contains only the definition of the driver version. This statement
is moved into a header called by all the affected source files, and the now
empty header is deleted.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20210729170930.23171-6-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This header only includes one prototype and one define statement. The
new definition is used once, thus it can be removed. The prototype is
moved to a header that is already called by the supplier and the user
of that routine, thus the small header is removed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20210729170930.23171-5-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This header file merely defines a single struct. Move that definition
to the header file that uses it, and delete rtw_qos.h.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20210729170930.23171-4-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In the GitHub repository from which this driver was derived, old kernels
had to be supported. Now that the driver is included in the kernel,
this code can be removed as well as all mention of version.h.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20210729170930.23171-3-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before this driver can be incorporated in the drivers/net/wireless tree,
the copyright info in all files must be converted to SPDX notation.
This patch converts the C source files in hal/.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20210729164814.32097-7-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before this driver can be incorporated in the drivers/net/wireless tree,
the copyright info in all files must be converted to SPDX notation.
This patch converts the 9 C source files in os_dep/.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20210729164814.32097-6-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before this driver can be incorporated in the drivers/net/wireless tree,
the copyright info in all files must be converted to SPDX notation.
This patch converts the 23 C source files in core/.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20210729164814.32097-5-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before this driver can be incorporated in the drivers/net/wireless tree,
the copyright info in all files must be converted to SPDX notation.
This patch converts the next 49 files.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20210729164814.32097-4-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before this driver can be incorporated in the drivers/net/wireless tree,
the copyright info in all files must be converted to SPDX notation.
This patch converts the next 23 files.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20210729164814.32097-3-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Before this driver can be incorporated in the drivers/net/wireless tree,
the copyright info in all files must be converted to SPDX notation.
This patch converts the first 20 files.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Link: https://lore.kernel.org/r/20210729164814.32097-2-Larry.Finger@lwfinger.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The vt6655 and vt6656 drivers have an unused CONFIG_PATH define floating
around in the code, but it is never used. Remove it as drivers should
never be reading from config files anyway, even if these were valid
files.
Reported-by: Joe Perches <joe@perches.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20210729095812.1693061-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The commit 55d6af1d66 ("lib/nmi_backtrace: explicitly serialize
banner and regs") serialized backtraces from more CPUs using the re-entrant
printk_printk_cpu lock. It was a preparation step for removing the obsolete
nmi_safe buffers.
The single-line messages about idle CPUs were not serialized against other
CPUs and might appear in the middle of backtrace from another CPU,
for example:
[56394.590068] NMI backtrace for cpu 2
[56394.590069] CPU: 2 PID: 444 Comm: systemd-journal Not tainted 5.14.0-rc1-default+ #268
[56394.590071] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014
[56394.590072] RIP: 0010:lock_is_held_type+0x0/0x120
[56394.590071] NMI backtrace for cpu 0 skipped: idling at native_safe_halt+0xb/0x10
[56394.590076] Code: a2 38 ff 0f 0b 8b 44 24 04 eb bd 48 8d ...
[56394.590077] RSP: 0018:ffffab02c07c7e68 EFLAGS: 00000246
[56394.590079] RAX: 0000000000000000 RBX: ffff9a7bc0ec8a40 RCX: ffffffffaab8eb40
It might cause confusion what CPU the following lines belongs to and
whether the backtraces are really serialized.
Prevent the confusion and serialize also the single line message against
other CPUs.
Fixes: 55d6af1d66 ("lib/nmi_backtrace: explicitly serialize banner and regs")
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20210727080939.27193-1-pmladek@suse.com
In esd_usb2_setup_rx_urbs() MAX_RX_URBS coherent buffers are allocated
and there is nothing, that frees them:
1) In callback function the urb is resubmitted and that's all
2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER
is not set (see esd_usb2_setup_rx_urbs) and this flag cannot be used
with coherent buffers.
So, all allocated buffers should be freed with usb_free_coherent()
explicitly.
Side note: This code looks like a copy-paste of other can drivers. The
same patch was applied to mcba_usb driver and it works nice with real
hardware. There is no change in functionality, only clean-up code for
coherent buffers.
Fixes: 96d8e90382 ("can: Add driver for esd CAN-USB/2 device")
Link: https://lore.kernel.org/r/b31b096926dcb35998ad0271aac4b51770ca7cc8.1627404470.git.paskripkin@gmail.com
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In ems_usb_start() MAX_RX_URBS coherent buffers are allocated and
there is nothing, that frees them:
1) In callback function the urb is resubmitted and that's all
2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER
is not set (see ems_usb_start) and this flag cannot be used with
coherent buffers.
So, all allocated buffers should be freed with usb_free_coherent()
explicitly.
Side note: This code looks like a copy-paste of other can drivers. The
same patch was applied to mcba_usb driver and it works nice with real
hardware. There is no change in functionality, only clean-up code for
coherent buffers.
Fixes: 702171adee ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface")
Link: https://lore.kernel.org/r/59aa9fbc9a8cbf9af2bbd2f61a659c480b415800.1627404470.git.paskripkin@gmail.com
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In usb_8dev_start() MAX_RX_URBS coherent buffers are allocated and
there is nothing, that frees them:
1) In callback function the urb is resubmitted and that's all
2) In disconnect function urbs are simply killed, but URB_FREE_BUFFER
is not set (see usb_8dev_start) and this flag cannot be used with
coherent buffers.
So, all allocated buffers should be freed with usb_free_coherent()
explicitly.
Side note: This code looks like a copy-paste of other can drivers. The
same patch was applied to mcba_usb driver and it works nice with real
hardware. There is no change in functionality, only clean-up code for
coherent buffers.
Fixes: 0024d8ad16 ("can: usb_8dev: Add support for USB2CAN interface from 8 devices")
Link: https://lore.kernel.org/r/d39b458cd425a1cf7f512f340224e6e9563b07bd.1627404470.git.paskripkin@gmail.com
Cc: linux-stable <stable@vger.kernel.org>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The recent fix for the resume on Lenovo machines seems causing a
regression on others. It's because the change always triggers the
connector selection no matter which widget node type is.
This patch addresses the regression by setting the resume callback
selectively only for the connector widget.
Fixes: 44609fc01f ("ALSA: usb-audio: Check connector value on resume")
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213897
Link: https://lore.kernel.org/r/20210729185126.24432-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Yasushi reported, that his Microchip CAN Analyzer stopped working
since commit 91c0255717 ("can: mcba_usb: fix memory leak in
mcba_usb"). The problem was in missing urb->transfer_dma
initialization.
In my previous patch to this driver I refactored mcba_usb_start() code
to avoid leaking usb coherent buffers. To archive it, I passed local
stack variable to usb_alloc_coherent() and then saved it to private
array to correctly free all coherent buffers on ->close() call. But I
forgot to initialize urb->transfer_dma with variable passed to
usb_alloc_coherent().
All of this was causing device to not work, since dma addr 0 is not
valid and following log can be found on bug report page, which points
exactly to problem described above.
| DMAR: [DMA Write] Request device [00:14.0] PASID ffffffff fault addr 0 [fault reason 05] PTE Write access is not set
Fixes: 91c0255717 ("can: mcba_usb: fix memory leak in mcba_usb")
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=990850
Link: https://lore.kernel.org/r/20210725103630.23864-1-paskripkin@gmail.com
Cc: linux-stable <stable@vger.kernel.org>
Reported-by: Yasushi SHOJI <yasushi.shoji@gmail.com>
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Tested-by: Yasushi SHOJI <yashi@spacecubics.com>
[mkl: fixed typos in commit message - thanks Yasushi SHOJI]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The hi3110_cmd() is supposed to return zero on success and negative
error codes on failure, but it was accidentally declared as a u8 when
it needs to be an int type.
Fixes: 57e83fb9b7 ("can: hi311x: Add Holt HI-311x CAN driver")
Link: https://lore.kernel.org/r/20210729141246.GA1267@kili
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
An early pull for v5.15 (there'll be more coming in a week or two),
consisting of the drm/scheduler conversion and a couple other small
series that one was based one. Mostly sending this now because IIUC
danvet wanted it in drm-next so he could rebase on it. (Daniel, if
you disagree then speak up, and I'll instead include this in the main
pull request once that is ready.)
This also has a core patch to drop drm_gem_object_put_locked() now
that the last use of it is removed.
[airlied: add NULL to drm_sched_init]
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGumRk7H88bqV=H9Fb1SM0zPBo5B7NsCU3jFFKBYxf5k+Q@mail.gmail.com
amdgpu:
- Fix resource leak in an error path
- Avoid stack contents exposure in error path
- pmops check fix for S0ix vs S3
- DCN 2.1 display fixes
- DCN 2.0 display fix
- Backlight control fix for laptops with HDR panels
- Maintainers updates
i915:
- Fix vbt port mask
- Fix around reading the right DSC disable fuse in display_ver 10
- Split display version 9 and 10 in intel_setup_outputs
msm:
- iommu fault display fix
- misc dp compliance fixes
- dpu reg sizing fix
panel:
- Fix bpc for ytc700tlag_05_201c
ttm:
- debugfs init fixes
-----BEGIN PGP SIGNATURE-----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=Dn5J
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2021-07-30' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Regular drm fixes pull, seems about the right size, lots of small
fixes across the board, mostly amdgpu, but msm and i915 are in there
along with panel and ttm.
amdgpu:
- Fix resource leak in an error path
- Avoid stack contents exposure in error path
- pmops check fix for S0ix vs S3
- DCN 2.1 display fixes
- DCN 2.0 display fix
- Backlight control fix for laptops with HDR panels
- Maintainers updates
i915:
- Fix vbt port mask
- Fix around reading the right DSC disable fuse in display_ver 10
- Split display version 9 and 10 in intel_setup_outputs
msm:
- iommu fault display fix
- misc dp compliance fixes
- dpu reg sizing fix
panel:
- Fix bpc for ytc700tlag_05_201c
ttm:
- debugfs init fixes"
* tag 'drm-fixes-2021-07-30' of git://anongit.freedesktop.org/drm/drm:
maintainers: add bugs and chat URLs for amdgpu
drm/amdgpu/display: only enable aux backlight control for OLED panels
drm/amd/display: ensure dentist display clock update finished in DCN20
drm/amd/display: Add missing DCN21 IP parameter
drm/amd/display: Guard DST_Y_PREFETCH register overflow in DCN21
drm/amdgpu: Check pmops for desired suspend state
drm/msm/dp: Initialize dp->aux->drm_dev before registration
drm/msm/dp: signal audio plugged change at dp_pm_resume
drm/msm/dp: Initialize the INTF_CONFIG register
drm/msm/dp: use dp_ctrl_off_link_stream during PHY compliance test run
drm/msm: Fix display fault handling
drm/msm/dpu: Fix sm8250_mdp register length
drm/amdgpu: Avoid printing of stack contents on firmware load error
drm/amdgpu: Fix resource leak on probe error path
drm/i915/display: split DISPLAY_VER 9 and 10 in intel_setup_outputs()
drm/i915: fix not reading DSC disable fuse in GLK
drm/i915/bios: Fix ports mask
drm/panel: panel-simple: Fix proper bpc for ytc700tlag_05_201c
drm/ttm: Initialize debugfs from ttm_global_init()
UAPI Changes:
- Add modifiers for arm fixed rate compression.
Cross-subsystem Changes:
- Assorted dt binding fixes.
- Convert ssd1307fb to json-schema.
- Update a lot of irc channels to point to OFTC, as everyone moved there.
- Fix the same divide by zero for asilantfb, kyro, rivafb.
Core Changes:
- Document requirements for new atomic properties.
- Add drm_gem_fb_(begin/end)_cpu_access helpers, and use them in some drivers.
- Document drm_property_enum.value for bitfields.
- Add explicit _NO_ for MIPI_DSI flags that disable features.
- Assorted documentation fixes.
- Update fb_damage handling, and move drm_plane_enable_fb_damage_clips to core.
- Add logging and docs to RMFB ioctl.
- Assorted small fixes to dp_mst, master handling.
- Clarify drm lease usage.
Driver Changes:
- Assorted small fixes to panfrost, hibmc, bridge/nwl-dsi, rockchip, vc4.
- More drm -> linux irq conversions.
- Add support for some Logic Technologies and Multi-Inno panels.
- Expose phy-functionality for drm/rockchip, to allow controlling from the media subsystem.
- Add support for 2 AUO panels.
- Add damage handling to ssd1307fb.
- Improve FIFO handling on mxsfb.
- Assorted small fixes to vmwgfx, and bump version to 2.19 for the new ioctls.
- Improve sony acx424akp backlight handling.
-----BEGIN PGP SIGNATURE-----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=ZSMl
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-2021-07-29' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
drm-misc-next for v5.15:
UAPI Changes:
- Add modifiers for arm fixed rate compression.
Cross-subsystem Changes:
- Assorted dt binding fixes.
- Convert ssd1307fb to json-schema.
- Update a lot of irc channels to point to OFTC, as everyone moved there.
- Fix the same divide by zero for asilantfb, kyro, rivafb.
Core Changes:
- Document requirements for new atomic properties.
- Add drm_gem_fb_(begin/end)_cpu_access helpers, and use them in some drivers.
- Document drm_property_enum.value for bitfields.
- Add explicit _NO_ for MIPI_DSI flags that disable features.
- Assorted documentation fixes.
- Update fb_damage handling, and move drm_plane_enable_fb_damage_clips to core.
- Add logging and docs to RMFB ioctl.
- Assorted small fixes to dp_mst, master handling.
- Clarify drm lease usage.
Driver Changes:
- Assorted small fixes to panfrost, hibmc, bridge/nwl-dsi, rockchip, vc4.
- More drm -> linux irq conversions.
- Add support for some Logic Technologies and Multi-Inno panels.
- Expose phy-functionality for drm/rockchip, to allow controlling from the media subsystem.
- Add support for 2 AUO panels.
- Add damage handling to ssd1307fb.
- Improve FIFO handling on mxsfb.
- Assorted small fixes to vmwgfx, and bump version to 2.19 for the new ioctls.
- Improve sony acx424akp backlight handling.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a753221a-e23e-0dc4-7ca6-8c1b179738d0@linux.intel.com
Hi Linus,
Please, pull the following patches that fix some fall-through warnings
when building with Clang and -Wimplicit-fallthrough on ARM.
Thanks
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEkmRahXBSurMIg1YvRwW0y0cG2zEFAmEC7NQACgkQRwW0y0cG
2zF5kRAAoK+t196vpkSzP6d72l5Odg9QpA0fz1UTfhEj7sH0mojDb7NzWBx9e3Ly
yR6XINBPCtBSyaFWwPLLJ1yP1kQ3cmtnaT04CNe7G1d7v/HFHbZ7lKEW63o6EEkD
WpJGk4omAIubikXfVo0alLHA6SLeovvf1rcoQHcSUqdaRLZdyaXWTzByz4wLs+Mr
xBOVWlVZFU3VGjJ9fUMo9sAWgaMYg2B9gWWkGA8upkmlYy8aXfthFoF597hA21qb
EK3f8BsFBoHX253PYaFswKlPdy1WCDaGTzcoOsSQsb2FcVDUEOt7faQ8jSCicFzY
I32G+6vWuA3XKScgTALOGHnqbzA0Tho1EywleJ6gFwWqkh12ZzRvflaK3KHQGdNL
sJliAx0bdKvmJQ+ydxlxD2kHNE8md1WO2XzyKVsoy8hnXuhwfkAFjU/Y3V85tb89
f9AIZqzmOVlx+MCz105hG1YfZDWNJwnV3H5rmZaPqHX8q9b1OSxHuFumWcy+KjI7
XCW0vTbS+n7ZQ/kltE6iRG3uIKAeDSixkBmknS5SRmb8q2aD+F9cSvDcFpEevyvq
sCElgeKwtASGJekz63tQNN772vLIRdFtyyPFBEfLPHnHxtU3IJfOGM6zbIpZHytl
s06ZoJITAqcRp8X30y1y/6bUJzU7GvKtqLp0ZVQgijFVZPvS34c=
=LGid
-----END PGP SIGNATURE-----
Merge tag 'fallthrough-fixes-clang-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull fallthrough fixes from Gustavo Silva:
"Fix some fall-through warnings when building with Clang and
'-Wimplicit-fallthrough' on ARM"
* tag 'fallthrough-fixes-clang-5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
scsi: fas216: Fix fall-through warning for Clang
scsi: acornscsi: Fix fall-through warning for clang
ARM: riscpc: Fix fall-through warning for Clang
Pull alpha updates from Matt Turner:
"They're mostly small janitorial fixes but there's also more important
ones:
- drop the alpha-specific x86 binary loader (David Hildenbrand)
- regression fix for at least Marvel platforms (Mike Rapoport)
- fix for a scary-looking typo (Zheng Yongjun)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
alpha: register early reserved memory in memblock
alpha: fix spelling mistakes
alpha: Remove space between * and parameter name
alpha: fp_emul: avoid init/cleanup_module names
alpha: Add syscall_get_return_value()
binfmt: remove support for em86 (alpha only)
alpha: fix typos in a comment
alpha: defconfig: add necessary configs for boot testing
alpha: Send stop IPI to send to online CPUs
alpha: convert comma to semicolon
alpha: remove undef inline in compiler.h
alpha: Kconfig: Replace HTTP links with HTTPS ones
alpha: __udiv_qrnnd should be exported
Use swap() instead of implementing it in order to make code more clean.
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
ecdsa_set_pub_key() makes an u64 pointer at 1 byte offset of the key.
This results in an unaligned u64 pointer. This pointer is passed to
ecc_swap_digits() which assumes natural alignment.
This causes a kernel crash on an armv7 platform:
[ 0.409022] Unhandled fault: alignment exception (0x001) at 0xc2a0a6a9
...
[ 0.416982] PC is at ecdsa_set_pub_key+0xdc/0x120
...
[ 0.491492] Backtrace:
[ 0.492059] [<c07c266c>] (ecdsa_set_pub_key) from [<c07c75d4>] (test_akcipher_one+0xf4/0x6c0)
Handle unaligned input buffer in ecc_swap_digits() by replacing
be64_to_cpu() to get_unaligned_be64(). Change type of in pointer to
void to reflect it doesn’t necessarily need to be aligned.
Fixes: 4e6602916b ("crypto: ecdsa - Add support for ECDSA signature verification")
Reported-by: Guillaume Gardet <guillaume.gardet@arm.com>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
refcount_t type and corresponding API can protect refcounters from
accidental underflow and overflow and further use-after-free situations.
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Acked-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The kfree_sensitive is a kernel API to clear sensitive information
that should not be leaked to other future users of the same memory
objects and free the memory. Its function is the same as the
combination of memzero_explicit and kfree. Thus, we can replace the
combination APIs with the single kfree_sensitive API.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Allocate the atmel_aes_dev data at tfm init time, and not for
each crypt request.
There's a single AES IP per SoC, clarify that in the code.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>