Documenting existing bindings for this device.
The Linux driver in theory 'works' without the two supplies that I have
listed as required, but without a valid scale. As such I've
documented it as required.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michael Hennerich <michael.hennerich@analog.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210627163244.1090296-14-jic23@kernel.org
This binding covers the ad5744, ad5744r, ad5764 and ad5764r DACs.
Note that the driver currently assumes the internal reference is used for
the r parts. The binding as defined relaxes this constraint.
There is no support in the binding or driver for the two digital IO
signals. I do not propose to add that until we have a means to
test any such binding.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210627163244.1090296-13-jic23@kernel.org
Straight forward binding with vref optional for those part with internal
regulators, but required for those without.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Ricardo Ribalda <ribalda@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210627163244.1090296-12-jic23@kernel.org
The use of vcc-supply for the reference voltage is unusual and should
probably be deprecated as there is an explicit VREF pin on at least
some of these parts.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210627163244.1090296-11-jic23@kernel.org
Simple binding, with optional vref.
Note that the Linux driver does support vcc-supply for historical
reasons, but lets not let that get into any bindings that are checked
going forwards. Hence I have deliberately not documented it.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210627163244.1090296-10-jic23@kernel.org
The naming of the regulator is problematic. VCC is usually a supply
voltage whereas these devices have a separate VREF pin.
Secondly, the regulator core might have provided a stub regulator if
a real regulator wasn't provided. That would in turn have failed to
provide a voltage when queried. So reality was that there was no way
to use the internal reference.
In order to avoid breaking any dts out in the wild, make sure to fallback
to the original vcc naming if vref is not available.
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20210627163244.1090296-9-jic23@kernel.org
The "max-clock" and "min-vrefresh" properties fail to validate with
commit cfe34bb7a7 ("dt-bindings: drm: bridge: adi,adv7511.txt:
convert to yaml"). Drop them, as they are parts of an out-of-tree
workaround that is not needed upstream.
Fixes: bcf3003438 ("arm64: dts: renesas: r8a77995: draak: Enable HDMI display output")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ulrich Hecht <uli+renesas@fpond.eu>
Link: https://lore.kernel.org/r/975b6686bc423421b147d367fe7fb9a0db99c5af.1625134398.git.geert+renesas@glider.be
The IN3R is connected to an analog microphone, and it needs the
micbias enabled in order to power the analog microphone.
Signed-off-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20210630175935.189454-1-aford173@gmail.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
According to the Hardware User's Manual, automatic transmission for PMIC
control (DVFS) is not available" on the R-Car E3 SoC. Experiments
showed this really means that support for automatic DVFS is not present,
while the IIC automatic transmission feature itself is still available,
albeit not super useful.
Hence there is no longer a reason not to declare compatibility with the
R-Car Gen3-specific and generic versions. Accordingly, extend the reg
property to cover the automatic transmission registers.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/7b68629350213ca8d37286a6ae6e1966f9958bb8.1624013699.git.geert+renesas@glider.be
According to the Hardware User's Manual, automatic transmission for PMIC
control (DVFS) is not available" on the RZ/G2E SoC. This really means
that support for automatic DVFS is not present, while the IIC automatic
transmission feature itself is still available, albeit not super useful.
Hence there is no longer a reason not to declare compatibility with the
R-Car Gen3-specific and generic versions. Accordingly, extend the reg
property to cover the automatic transmission registers.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/d222c2faa63f95d672efa07e55e8d01bddd17e65.1624013699.git.geert+renesas@glider.be
According to the Hardware User's Manual, automatic transmission for PMIC
control (DVFS) is not available" on RZ/G1 SoCs. This really means that
support for automatic DVFS is not present, while the IIC automatic
transmission feature itself is still available, albeit not super useful.
Hence there is no longer a reason not to declare compatibility with the
R-Car Gen2-specific and generic versions.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/573c8ca99f3924a96000fb328a84f1f6d421c6af.1624013699.git.geert+renesas@glider.be
Move the parts related to the fourth USB2 interface on Salvator-XS
boards to salvator-xs.dtsi, to avoid future duplication of board
descriptions.
As this interface is not present on all SoCs that can be found on
Salvator-X(S), but only on R-Car H3 ES2.0+, its descriptions are
protected by the preprocessor symbol SOC_HAS_USB2_CH3, defined in
r8a77951.dtsi, and undefined in r8a77950.dtsi.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/411df1adfd64ee82e5a0d1603df85d657fd4f8c0.1623087028.git.geert+renesas@glider.be
Move the common parts related to the third USB2 interface on
Salvator-X(S) boards to salvator-common.dtsi, to reduce current and
avoid future duplication of board descriptions.
As this interface is not present on all SoCs that can be found on
Salvator-X(S), but only on R-Car H3, its descriptions are protected by
the preprocessor symbol SOC_HAS_USB2_CH2, defined in r8a77951.dtsi.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/ebc434502fc899b1f9d9640f560c3eaab6bb0927.1623087028.git.geert+renesas@glider.be
Move the common parts related to the SATA interface on Salvator-X(S)
boards to salvator-common.dtsi and salvator-xs.dtsi, to reduce current
and avoid future duplication of board descriptions.
As this interface is not present on all SoCs that can be found on
Salvator-X(S), but only on R-Car H3 and M3-N, its descriptions are
protected by the preprocessor symbol SOC_HAS_SATA, defined in
r8a77951.dtsi and r8a77965.dtsi.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/87f91290ec7b523aa508e920a169ecaddccc9144.1623087028.git.geert+renesas@glider.be
Move the common parts related to the second HDMI interface on
Salvator-X(S) boards to salvator-common.dtsi, to reduce current and
avoid future duplication of board descriptions.
As this interface is not present on all SoCs that can be found on
Salvator-X(S), but only on R-Car H3, its description are protected by
the preprocessor symbol SOC_HAS_HDMI1, defined in r8a77951.dtsi.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/a1d9dcd481d36e5b6e78934e587f6391022030b5.1623087028.git.geert+renesas@glider.be
Move credit charge verification over smb2 request size verification
to avoid being skipped.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
MS-SMB2 specification describe :
If the calculated credit number is greater than the CreditCharge,
the server MUST fail the request with the error code
STATUS_INVALID_PARAMETER.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When user insert wrong password, ksmbd return STATUS_INVALID_PARAMETER
error status to client. It will make user confusing whether it is not
password problem. This patch change error status to
STATUS_LOGON_FAILURE. and return STATUS_INSUFFICIENT_RESOURCES if memory
allocation failed on session setup.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use smb2_compression_ctx instead of smb2_encryption_neg_context.
Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
This is a Lenovo ThinkStation machine which uses the codec alc623.
There are 2 issues on this machine, the 1st one is the pop noise in
the lineout, the 2nd one is there are 2 Front Mics and pulseaudio
can't handle them, After applying the fixup of
ALC623_FIXUP_LENOVO_THINKSTATION_P340 to this machine, the 2 issues
are fixed.
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Link: https://lore.kernel.org/r/20210719030231.6870-1-hui.wang@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
TTMs buffer objects are based on GEM objects for quite a while
and rely on initializing those fields before initializing the TTM BO.
Nouveau now doesn't init the GEM object for internally allocated BOs,
so make sure that we at least initialize some necessary fields.
Signed-off-by: Christian König <christian.koenig@amd.com>
Tested-by: Mikko Perttunen <mperttunen@nvidia.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609172902.1937-1-christian.koenig@amd.com
Update copyrights for files modified by the 12.8.0.11 patch set.
Link: https://lore.kernel.org/r/20210707184351.67872-21-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update lpfc version to 12.8.0.11.
Link: https://lore.kernel.org/r/20210707184351.67872-20-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When a node moves to NPR state due to a device recovery event, the
nlp_fc4_types in the node are cleared. An ADISC received for a node in the
NPR state triggers an ADISC. Without fc4 types being known, the calls to
register with the transport are no-op'd, thus no additional references are
placed on the node by transport re-registrations. A subsequent RSCN could
trigger another unregister request, which will decrement the reference
counts, leading to the ref count hitting zero and the node being freed
while futher discovery on the node is being attempted by the RSCN event
handling.
Fix by skipping the trigger of an ADISC when in NPR state. The normal ADISC
process will kick off in the regular discovery path after receiving a
response from name server.
Link: https://lore.kernel.org/r/20210707184351.67872-19-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
During RSCN storms, some instances of LIP on SLI-3 adapters lead to a
situation where FLOGIs keep failing with firmware indicating an illegal
command error code. This situation was preceded by an ADISC completion
that was processed while the link was down. This path on SLI-3 performs a
CLEAR_LA and attempts to activate a VPI with REG_VPI. Later, as the FLOGI
completes, it's no longer in sync with the VPI state. In SLI-3 it is
illegal to have an active VPI during FLOGI.
Resolve by circumventing the SLI-3 path that performs the CLEAR_LA and
REG_VPI. The path will be taken after the FLOGI after the next Link Up.
Link: https://lore.kernel.org/r/20210707184351.67872-18-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In the PLOGI and ADISC completion handling, the device removal event could
be skipped during some link errors. This could leave a stale node in UNUSED
state. Driver unload would hang for a long time waiting for this node to
be freed.
Resolve by taking the following steps:
- Always post ADISC completion events to discovery state machine upon
ADISC completion.
- In case of a completion error for PLOGI/ADISC, ensure that init refcount
is dropped if not registered with transport.
Link: https://lore.kernel.org/r/20210707184351.67872-17-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On an RSCN event, the nodes specified in RSCN payload and in MAPPED state
are moved to NPR state in order to revalidate the login. This triggers an
immediate unregister from SCSI/NVMe backend. The assumption is that the
node may be missing. The re-registration with the backend happens after
either relogin (PLOGI/PRLI; if ADISC is disabled or login truly lost) or
when ADISC completes successfully (rediscover with ADISC enabled).
However, the NVMe-FC standard provides for an RSCN to be triggered when
the remote port supports a discovery controller and there was a change
of discovery log content. As the remote port typically also supports
storage subsystems, this unregister causes all storage controller
connections to fail and require reconnect.
Correct by reworking the code to ensure that the unregistration only occurs
when a login state is truly terminated, thereby leaving the NVMe storage
controllers in place.
The changes made are:
- Retain node state in ADISC_ISSUE when scheduling ADISC ELS retry.
- Do not clear wwpn/wwnn values upon ADISC failure.
- Move MAPPED nodes to NPR during RSCN processing, but do not unregister
with transport. On GIDFT completion, identify missing nodes (not marked
NLP_NPR_2B_DISC) and unregister them.
- Perform unregistration for nodes that will go through ADISC processing
if ADISC completion fails.
- Successful ADISC completion will move node back to MAPPED state.
Link: https://lore.kernel.org/r/20210707184351.67872-16-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Assign a default value of 1 to driver module parameter lpfc_use_adisc.
Link: https://lore.kernel.org/r/20210707184351.67872-15-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The SLI4 interface changed the manner used to indicate PBDE support.
Rework the driver to check for PBDE support via the PBDE feature bit in
COMMON_GET_SLI4_PARAMETERS.
Link: https://lore.kernel.org/r/20210707184351.67872-14-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Mailbox commands sent via ioctl/bsg from user applications may be
interrupted from processing by a concurrently triggered PCI function
reset. The command will not generate a completion due to the reset. This
results in a user application hang waiting for the mailbox command to
complete.
Resolve by changing the function reset handler to detect that there was an
outstanding mailbox command and simulate a mailbox completion. Add some
additional debug when a mailbox command times out.
Link: https://lore.kernel.org/r/20210707184351.67872-13-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In lpfc_offline_prep() an RPI is freed and nlp_rpi set to 0xFFFF before
calling lpfc_unreg_rpi(). Unfortunately, lpfc_unreg_rpi() uses nlp_rpi to
index the sli4_hba.rpi_ids[] array.
In lpfc_offline_prep(), unreg rpi before freeing the rpi.
Link: https://lore.kernel.org/r/20210707184351.67872-12-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Since the REG_LOGIN to the fabric controller happens in parallel with SCR,
it may or may not be completed by the time RDF is sent. RDF and SCR are
sent to the fabric in parallel, so checking for a completed REG_LOGIN in
the RDF submit path is not needed.
Remove the REG_LOGI check from the RDF submission path.
Link: https://lore.kernel.org/r/20210707184351.67872-11-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The ELS job request structure, that is allocated while issuing ELS RDF/SCR
request path, is not being released in an error path causing a memory leak
message on driver unload.
Free the ELS job structure in the error paths.
Link: https://lore.kernel.org/r/20210707184351.67872-10-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
RDF ELS handling for NPIV ports may result in an incorrect NDLP reference
count. In the event of a persistent link down, this may lead to premature
release of an NDLP structure and subsequent NULL ptr dereference panic.
Remove extraneous lpfc_nlp_put() call in NPIV port RDF processing.
Link: https://lore.kernel.org/r/20210707184351.67872-9-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In the routine that generically cleans up an ELS after completion, the NDLP
put is done prior to the freeing of the IOCB. The IOCB may reference the
NDLP.
Move the lpfc_nlp_put() after freeing the IOCB.
Link: https://lore.kernel.org/r/20210707184351.67872-8-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Previous logic accidentally overrides the status variable to FAILURE when
target reset status is SUCCESS.
Refactor the non-SUCCESS logic of lpfc_vmid_vport_cleanup(), which resolves
the false override.
Link: https://lore.kernel.org/r/20210707184351.67872-7-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
If a LOGO is received for a node that is in the NPR state, post a DEVICE_RM
event to allow clean up of the logged out node.
Clearing the NLP_NPR_2B_DISC flag upon receipt of a LOGO ACC may cause
skipping of processing outstanding PLOGIs triggered by parallel RSCN
events. If an outstanding PLOGI is being retried and receipt of a LOGO ACC
occurs, then allow the discovery state machine's PLOGI completion to clean
up the node.
Link: https://lore.kernel.org/r/20210707184351.67872-6-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update comment headers for functions lpfc_vmid_cmd and lpfc_vmid_poll.
Link: https://lore.kernel.org/r/20210707184351.67872-5-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Define additional status fields in mailbox commands to help provide
additional information when downloading new firmware.
Link: https://lore.kernel.org/r/20210707184351.67872-4-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
There are instances when trace event logs are triggered from an interrupt
context. The trace event log may attempt to alloc memory causing scheduling
while atomic bug call traces.
Remove the need for the kmalloc'ed vport array when checking the
log_verbose flag, which eliminates the need for any allocation.
Link: https://lore.kernel.org/r/20210707184351.67872-3-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The NVMe support indicator in log message 6422 is displaying a field that
was initialized but never set to indicate NVMe support. Remove obsolete
nvme_support element from the lpfc_hba structure and change log message to
display NVMe support status as reported in SLI4 Config Parameters mailbox
command.
Link: https://lore.kernel.org/r/20210707184351.67872-2-jsmart2021@gmail.com
Co-developed-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: Justin Tee <justin.tee@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmDY+dceHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGx1YH/idbXKwfQkBpBCud
BvUo2RaRetACEXo38ydiHNxSyAkde79AVMNDXWCBgnWFwpUG51TtFIAn2VhVIv7d
WlBJPWhbmHwddQB+HACYXsRcBRCc2md7RufOqR/yulx+T8QxQy7yHEd7wOlSdYWC
/BUb/94qREK60FwdWjATSdqO5ditOd5XxvBnfGh04iUmiMRwubOtYPfaomo9MIK6
Qs/Yt6SkIROi9cMQf2NakE2UFeVnQ+/TrDTRsTqokUtLSzpjxDjX39JoRNjLVgS1
XOhrOlUQ+sJ1O1Hq4vSfy8maWivzF9XCCsApd6+Ks1yMB6yw15kU7cQ2yF++UPvC
ktrHsiM=
=I8Bu
-----END PGP SIGNATURE-----
Merge tag 'v5.13' into next
Sync up with the mainline to get the latest parport API.
flush_kernel_dcache_page() is not used by aacraid, and this header already
comes in through the scatterlist/block headers anyway.
Link: https://lore.kernel.org/r/20210712060928.4161649-6-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>