Commit graph

1,044,825 commits

Author SHA1 Message Date
Olof Johansson
796f0ae8e7 mt8173:
- split hardware encoder block into two devices.
 
 mt8167:
 - add pm domains, multi-media system (mmsys), SMI, local arbiter
   (larb) and IOMMU nodes.
 
 mt8183:
 - Add new chromebooks: HP Chromebook 11a, Acer Chromebook 311, HP
   Chromebook x360 11MK G3 EE, Lenovo IdeaPad Flex 3.
 - add power domain to SMI common node.
 - add power supplies for EEPROM node.
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCAA1FiEEUdvKHhzqrUYPB/u8L21+TfbCqH4FAmDDOIkXHG1hdHRoaWFz
 LmJnZ0BnbWFpbC5jb20ACgkQL21+TfbCqH4Xkw//WEDslcQS4mBD0JgQHehezPCu
 xvxAFatvkTHo4DLEqR3xyD2S8KfDzBSgkDuGW1D5BIgftGaLONtPSmTT9/qZsP1M
 YSaz5ijPYJTuX4XIDeKWbPe48TPIvwo1qEqJKFpjHSm5ED8OcntGhSRPO1v3QYVe
 /u/zHvbElQt7xpk15nU6hu9TaMkNWh475/YaoxuAi8GCDM8RuO9TSkeT7yz3eTO+
 e0bZDPVtlSSaSOZcFFtbQcWq3OGoKevz+eDxACjUwvf4eUZCvXalW+IGCe4tHa/l
 sFMuX5bzdwoTUaxwSboiX3AK7X2AqBsQXZUoYnZODVjehqkNfNLZ7W6uFmTAwE69
 lDjdQ71BNqKvAeg25Ml4odKtUzQBNEkYtwDo/+ISo4rS17gVmIS62PToa9FhyvN+
 hRnSbF4MsgI4wSgwyJu7gh3jtzxafC0i98ZZSkHLKlsvtjkPMzQce4dASyQ/ZSYN
 hz3m4l7y0vKfVCSfTPckAldytPhxIjDR9X/+hMIyeaGaADn5kyAc3HCVYWTHgwBI
 xVXXv4uQRhtUVahTN49+RC07aE7n404mylPK3MpX4HXN99Aepivg1u+FLPBMt/oq
 HAkUTkz1ZppSrhDO6FGZdfT/8aOEP3uwVC9R4gN/0I1sb8Z7bDYYEuqsBc+B/odv
 6HVM1wu8KUVNy9NKpnk=
 =dnHf
 -----END PGP SIGNATURE-----

Merge tag 'v5.13-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/dt

mt8173:
- split hardware encoder block into two devices.

mt8167:
- add pm domains, multi-media system (mmsys), SMI, local arbiter
  (larb) and IOMMU nodes.

mt8183:
- Add new chromebooks: HP Chromebook 11a, Acer Chromebook 311, HP
  Chromebook x360 11MK G3 EE, Lenovo IdeaPad Flex 3.
- add power domain to SMI common node.
- add power supplies for EEPROM node.

* tag 'v5.13-next-dts64' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: (21 commits)
  arm64: dts: mt8183: Add node for the Mali GPU
  arm64: dts: mt8183-kukui: Add tboard thermal zones
  arm64: dts: mt8183: add cbas node under cros_ec
  arm64: dts: mt8183: add supply name for eeprom
  arm64: dts: mt8183: remove syscon from smi_common node
  arm64: dts: mt8183: Add kukui-jacuzzi-fennel board
  arm64: dts: mt8183: Add kukui-jacuzzi-kenzo board
  arm64: dts: mt8183: Add kukui-jacuzzi-burnet board
  arm64: dts: mt8183: Add kukui-jacuzzi-willow board
  arm64: dts: mt8183: Add kukui-jacuzzi-kappa board
  dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-fennel
  dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-kenzo
  dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-burnet
  dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-willow
  dt-bindings: arm64: dts: mediatek: Add mt8183-kukui-jacuzzi-kappa
  arm64: dts: mediatek: mt8167: add iommu node
  arm64: dts: mediatek: mt8167: add larb nodes
  arm64: dts: mediatek: mt8167: add smi_common node
  arm64: dts: mediatek: mt8167: add mmsys node
  arm64: dts: mediatek: mt8167: add power domains
  ...

Link: https://lore.kernel.org/r/117d5eb5-bc99-70bb-a1a9-d7141fe96527@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:47:56 -07:00
Olof Johansson
97a5666768 devapc:
- add missing MODULE_DEVICE_TABLE to fix modalias
 
 mkt-pm-domains:
 - register smi node as regmap and not as syscon
 - prepare-enable and unprepare-disable dependent clocks
 
 pwrap:
 - add support for MT8195
 -----BEGIN PGP SIGNATURE-----
 
 iQJLBAABCAA1FiEEUdvKHhzqrUYPB/u8L21+TfbCqH4FAmDDQO0XHG1hdHRoaWFz
 LmJnZ0BnbWFpbC5jb20ACgkQL21+TfbCqH6zqg//XIB9++ubi4du81+DeGuenl4R
 OeD3YsDlrGAGtKzqOgdsmmRXJSj+6wiQAVb9RaGyOr1T62Te5xK8l6OfFAmpUr8J
 9bnLiuSMdl9MQm29Q/yTWTYuYXblM3dIXHvYLWF7pNy2eM8rJn9My/qCd5OxrjA2
 xKD7SvvnFNi8LAB83J8s2kqF02TdbNN1qzxQUlfYXwpT6yfbssNM6PenXHcv0BcI
 P+wX6TXhcFITCugs0E/tGHJ4ArlMOgJLcdOGOVtD4zfFwCBgV0skVTnrv0jZOAQP
 92XWCKL60yqH4B/pIB9iSe+FYH319gCV7dPSuSyO2Gl5Bby/GuGtmuFroYyD77VB
 zpVcybUH6WEKnL4TYwPFkJHVYXFmjQacR4sc0BLywH/y/93atpCKb7lmkgxxbrRp
 OkNIqRLRqdgz31cHxd3sbvWgI7trQLDzXjU1RZQk+dzvAjH1GG2c+e1Xz7Fm26Fy
 Rmhh2up4YQnkgnewwcnBYgWCIOdQS99IHRLpHqj5qK1Pivorb3O2ZmCXdKef61yD
 EZiWugyzSU3Fqhpc9yDngqe7iX3be0xIrEWomqmJhO/p5GtyttzoVI9WnfgjnlPW
 do/eZICM8kRHBnp1wVF8nAj5QJGX08Yi40EVDLlG5TgnpC9Yp1oFEAsWE7l3xzVf
 SYtnmqKCdEGH78AIhLs=
 =ydya
 -----END PGP SIGNATURE-----

Merge tag 'v5.13-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/drivers

devapc:
- add missing MODULE_DEVICE_TABLE to fix modalias

mkt-pm-domains:
- register smi node as regmap and not as syscon
- prepare-enable and unprepare-disable dependent clocks

pwrap:
- add support for MT8195

* tag 'v5.13-next-soc' of https://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux:
  soc: mediatek: pwrap: add pwrap driver for MT8195 SoC
  dt-bindings: mediatek: add compatible for MT8195 pwrap
  soc: mtk-pm-domains: Fix the clock prepared issue
  soc: mtk-pm-domains: do not register smi node as syscon
  soc: mediatek: add missing MODULE_DEVICE_TABLE

Link: https://lore.kernel.org/r/479ec9ad-95d3-ce91-8243-63596c4c6676@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:47:19 -07:00
Olof Johansson
a3c52f08ab Renesas DT binding updates for v5.14
- Document support for the new RZ/G2L, RZ/G2LC, and RZ/G2UL SoCs,
   - Document support for the new RZ/G2L SMARC EVK board.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYMMo+AAKCRCKwlD9ZEnx
 cEbVAP9U5LZ0bf+eETTIrpwkGNc8O2iJ4NRmFkdhpPa60S2MPwEA14Vjx36RrIxb
 1pDLka0B3WK5u/b31N4ut88v7658iw0=
 =tqZR
 -----END PGP SIGNATURE-----

Merge tag 'renesas-dt-bindings-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas DT binding updates for v5.14

  - Document support for the new RZ/G2L, RZ/G2LC, and RZ/G2UL SoCs,
  - Document support for the new RZ/G2L SMARC EVK board.

* tag 'renesas-dt-bindings-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  dt-bindings: power: renesas,rzg2l-sysc: Add DT binding documentation for SYSC controller
  dt-bindings: arm: renesas: Document SMARC EVK
  dt-bindings: arm: renesas: Document Renesas RZ/G2{L,LC} SoC variants
  dt-bindings: arm: renesas: Document Renesas RZ/G2UL SoC

Link: https://lore.kernel.org/r/cover.1623403802.git.geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:46:28 -07:00
Olof Johansson
ec7f5cff6e Renesas driver updates for v5.14
- Initial support for the new RZ/G2L SoC variants.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYMMn3gAKCRCKwlD9ZEnx
 cBUTAP9rhZwEVXsYWcaJrPOFntSFpQMnVmG5u38DtUaY3oW+dgD/YY3pxO9QR7Ce
 ovQblKGAMR0RDf0sOa4z5FPCSNCLcwU=
 =sQ07
 -----END PGP SIGNATURE-----

Merge tag 'renesas-drivers-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/drivers

Renesas driver updates for v5.14

  - Initial support for the new RZ/G2L SoC variants.

* tag 'renesas-drivers-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  soc: renesas: Add support to read LSI DEVID register of RZ/G2{L,LC} SoC's
  soc: renesas: Add ARCH_R9A07G044 for the new RZ/G2L SoC's

Link: https://lore.kernel.org/r/cover.1623403800.git.geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:45:59 -07:00
Olof Johansson
d4dd469936 Renesas ARM DT updates for v5.14 (take two)
- External interrupt (INTC-EX) support for the R-Car M3-W+ SoC,
   - Initial support for the new RZ/G2L SoC on the RZ/G2L SMARC EVK
     board,
   - Miscellaneous fixes and improvements.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYMMoCAAKCRCKwlD9ZEnx
 cJyjAQDGvq/Y47d2ViaC4/1oii+iLuK54C0p4MLdAlS+3BRnEgEAnW5fYMJu9mHe
 uJ4iKUbgXQpXkxz6F8N3w9RsKx1cNQI=
 =kK+H
 -----END PGP SIGNATURE-----

Merge tag 'renesas-arm-dt-for-v5.14-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas ARM DT updates for v5.14 (take two)

  - External interrupt (INTC-EX) support for the R-Car M3-W+ SoC,
  - Initial support for the new RZ/G2L SoC on the RZ/G2L SMARC EVK
    board,
  - Miscellaneous fixes and improvements.

* tag 'renesas-arm-dt-for-v5.14-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  arm64: dts: renesas: r9a07g044: Add SYSC node
  arm64: dts: renesas: Add initial device tree for RZ/G2L SMARC EVK
  arm64: dts: renesas: Add initial DTSI for RZ/G2{L,LC} SoC's
  dt-bindings: clock: Add r9a07g044 CPG Clock Definitions
  arm64: dts: renesas: r8a779a0: Drop power-domains property from GIC node
  arm64: dts: renesas: r8a77961: Add INTC-EX device node
  ARM: dts: silk: Configure pull-up for SOFT_SW GPIO keys
  ARM: dts: gose: Configure pull-up for SOFT_SW GPIO keys
  ARM: dts: blanche: Configure pull-up for SOFT_SW and SW25 GPIO keys
  ARM: dts: lager: Configure pull-up for SOFT_SW GPIO keys
  arm64: dts: renesas: r8a7796[01]: Fix OPP table entry voltages
  arm64: dts: renesas: Add missing opp-suspend properties

Link: https://lore.kernel.org/r/cover.1623403796.git.geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:45:38 -07:00
Olof Johansson
f1b1d76afd Renesas ARM defconfig updates for v5.14 (take two)
- Enable support for the new RZ/G2L SoC variants in the arm64
     defconfig.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYMMlhwAKCRCKwlD9ZEnx
 cKvlAQDHZ4Us8NCpurU4LnFb01IjM5wnHhRZV67K1bS57ydX9AD/acKtF+lRgjz4
 je+6YID3qhtsu0XXpRGA7GuiciTwdQw=
 =ZT5k
 -----END PGP SIGNATURE-----

Merge tag 'renesas-arm-defconfig-for-v5.14-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig

Renesas ARM defconfig updates for v5.14 (take two)

  - Enable support for the new RZ/G2L SoC variants in the arm64
    defconfig.

* tag 'renesas-arm-defconfig-for-v5.14-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  arm64: defconfig: Enable ARCH_R9A07G044

Link: https://lore.kernel.org/r/cover.1623403795.git.geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:43:38 -07:00
Olof Johansson
9bfa382935 ARMv8 Juno fix for v5.14
Just a single fix to use standard and generic nodes names for SCMI
 power domain controller and clock controller devicetree nodes.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEunHlEgbzHrJD3ZPhAEG6vDF+4pgFAmDDE7YACgkQAEG6vDF+
 4pg9mw/9EBMGCtYLRwJtc/0IvRrFEVmtqRcmwEKBrXagFnk62NmY5y5OemfToqse
 T2UQdDfoj0Jr+1LVY5ScMAkugIbcadWVMQoLhTF82xTTTWsG5Q2rcRFb1gQeFSwG
 gzes4PrQYkbPcdCphoAEr6veRhOJW5fwKU0txHs2grjILOKZczSfFcYdM2eki4Wf
 84FwgitESBRpz4g3YKf0cKIeN+Q4kYJu3o40Z6V1fRPXuWycLW+0xSxG6u778Q7V
 a2KK03dbNj1WYYGOhCS2lz3aN8vZXJPaTkUgnskam7hK9IlwwWy3CccK63QgfBmQ
 OlKKA+3rVe8PUIHLCej3HT9PxY/3LCLG3NChqZ7vy5Btd6QJKaSI9Pc9sy2eUaPc
 JNIblu+qu5bOO6/adsKBhX/dyiCqN8/KFDOLv9N+oBvJrRjGEWjd2nE44W2hhWEv
 fdzrSgSkgvb5WGhDnCivS0ZkFim91D3Ayjq1FlkYRIXoo4h9LyO1ruDLK/pF9yOc
 29X7gEryM8n9q9Kq7ypGF4sKd9JrBbk2XCFxp7rXq+uueSHUXqvtey06BnrvV7Tl
 NTEon08E6Wo4KzUk6ZkunaufhAJx6cgMCn+dCCY+IrMWDitMn4I86h1uJDNnuWwS
 1OrFZpXiq9jw5iBF158LcWzAwTIUxxFwNPaOJycbjgCGQiELw2Q=
 =36FY
 -----END PGP SIGNATURE-----

Merge tag 'juno-fix-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/dt

ARMv8 Juno fix for v5.14

Just a single fix to use standard and generic nodes names for SCMI
power domain controller and clock controller devicetree nodes.

* tag 'juno-fix-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  arm64: dts: juno: Update SCPI nodes as per the YAML schema

Link: https://lore.kernel.org/r/20210611075805.2813712-1-sudeep.holla@arm.com
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:42:55 -07:00
Olof Johansson
959cd8f125 ARM SCMI updates for v5.14
- Support for SCMI clocks from the SCMI power domains
 - Addition of checks for correct compatibles for shmem devicetree nodes
   that were found missing in the process of YAML schema conversion
 - Kconfig and associated build fix found when optee transport are being
   worked on
 - Couple of fixes and cleanups found as with work-in-progress virtio
   transport support
 
 The new transports(optee and virtio) themselves are still being worked on
 with ongoing reviews, they are not part of this yet
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEunHlEgbzHrJD3ZPhAEG6vDF+4pgFAmDDFrUACgkQAEG6vDF+
 4pj3fQ//U6nmdP6paXL4B6jg3OlJcvd15E1vJjxSHdQ6pTE+pWN0JYGDgLOU5/hp
 RTWGLHX1L2IV53Jl7UUM0fSLhqNQG94seVUYFH/fY1YKYDHbFEv/L6t2ivlyEYdf
 Op7W1ti/EQf9SydCprOeY37C725I0CloNMqYh7DHTzQ/eioQq505HYSGaVhH+4ec
 bkZgUPundLnoT4mWrMEXpwT9L+NjcDcyeW1O8ldWXeLgV+maS7a4ScWkz7802PYW
 UGiYQWLSyaZjwL2r4hAVxBUSRH/8suKWXk0K42d1546QduuzC5rUqs2Di/MCxW8z
 2q6LR8OkxSy1waT/MxCY7d9tspiFgJb87153SB+ChXKpVs/RutJyfHaXNueB8amt
 6rqwq2l2/k4yTnOG3U36NuBWfDsiCzJ2L3WzPGSikUz2vM6QCtUgCgKiEphKwytO
 AYtE4m7PikVOZaK1b/8RGBOIWjAB239ZexbnZtxXChLSTisa/K7aQevG99/s0hzk
 ucP85gSzYfazIQEbBeRLieksiCnvL609wW0c7ngIWye++fsmcz7ptNIjxrosgjXG
 pq+FMiSUrBn8QJ1nuwiUJt6U0pkgg1N51TyZ+6uHHSy8n5sB8PN6y2l99UHI6YPD
 EbehYioujCepG82CNK3DbSP2yeMt6unlZXWtazZC8vm0uKeeuuA=
 =0YWr
 -----END PGP SIGNATURE-----

Merge tag 'scmi-updates-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/drivers

ARM SCMI updates for v5.14

- Support for SCMI clocks from the SCMI power domains
- Addition of checks for correct compatibles for shmem devicetree nodes
  that were found missing in the process of YAML schema conversion
- Kconfig and associated build fix found when optee transport are being
  worked on
- Couple of fixes and cleanups found as with work-in-progress virtio
  transport support

The new transports(optee and virtio) themselves are still being worked on
with ongoing reviews, they are not part of this yet

* tag 'scmi-updates-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
  firmware: arm_scmi: Avoid multiple initialisations of hdr->protocol_id
  firmware: arm_scmi: Move reinit_completion from scmi_xfer_get to do_xfer
  firmware: arm_scmi: Add delayed response status check
  firmware: arm_scmi: Add compatibility checks for shmem node
  firmware: arm_scpi: Add compatibility checks for shmem node
  firmware: arm_scmi: Fix the build when CONFIG_MAILBOX is not selected
  firmware: arm_scmi: Reset Rx buffer to max size during async commands
  firmware: arm_scmi: Add SMCCC discovery dependency in Kconfig
  firmware: arm_scmi: Add clock management to the SCMI power domain

Link: https://lore.kernel.org/r/20210611075722.2813550-1-sudeep.holla@arm.com
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:42:29 -07:00
Olof Johansson
fb755b075d Some Ux500 DTS updates for v5.14:
- Fix interrupt cells, GPIO controller node names in accordance
   with new YAML schemas.
 - Add proper compatible strings for Broadcomm Wifi and BT.
 - Fix upp and add some mount matrices for accelerometers so
   e.g. UI:s work as they should.
 - Drop the DRDY pin assignment for a non-existing pin on a
   magnetometer.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmDCjsUACgkQQRCzN7AZ
 XXNE3g/9F9aab/2+U139Vm2D+4q/bV95WpwL/bKcl/a6w10aNCutfsG80SH5XDeE
 TvsPSCJ8pvsTaC95hJc7I1tmb5O9rv9DUtyQ7F1cw4OgLSZhdbtNxF63Y2lAmVdv
 mXFUr5lg7yL98eym8veyQPlaxiOxPv78AwcR/sVuhgHW3iUsfg0OGWPKo/yjDbCG
 HF7GdJFMkPVDgISaFKQXTU1dJFhhIwQBLRR8fMZhUN2WY+lEPKChAM4IEqQvOOxY
 rXehzGiwSYwHfhU+HCOJTD46a6mEzdt+F3IdhO5BhaaqJWQDMlu4N0d20Uquyl2s
 xRt8Iwd/oofrn2+2gicjRfj/hHKMkJVuzNQ+uM91V6Pqd8paWo/KX0pLMwELJU7t
 KDprMHmO5qnCLjTK+KkaSxRUiPHkCGzaZGbnh6BBLs2X47fddLyh30hGWTz8KRYU
 QAoAV7u8e5dJucx8L8S0H3iRYHwjl8+1sLDENqKHdNZ49b89r2nmiQ1Lj6bNQD7R
 ZX3Kl0DgnHQR59vuGXQkLqRl0svq1EmWdvWNEX4K5E2LLuTd27ckNApGxKH4hwfO
 urzvmApVuZUZLA48SYeoTp39O3Nfs0qUqbk+c1Gm56BI6ehHeTlFPeQio4uI5PtF
 lDJqNtmNACjKF3w7TXC8Dwf7eZcMpq2FMbgRo2nYJJJgdx+mrc0=
 =Yyrj
 -----END PGP SIGNATURE-----

Merge tag 'ux500-dts-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt

Some Ux500 DTS updates for v5.14:
- Fix interrupt cells, GPIO controller node names in accordance
  with new YAML schemas.
- Add proper compatible strings for Broadcomm Wifi and BT.
- Fix upp and add some mount matrices for accelerometers so
  e.g. UI:s work as they should.
- Drop the DRDY pin assignment for a non-existing pin on a
  magnetometer.

* tag 'ux500-dts-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: dts: ux500: Fix orientation of Janice accelerometer
  ARM: dts: href: Mount matrices for TVK R2
  ARM: dts: ux500: Fix some compatible strings
  ARM: dts: ux500: Drop drdy pin assignment from magnetometer
  ARM: dts: ux500: Fix orientation of accelerometer
  ARM: dts: ux500: Rename gpio-controller node
  ARM: dts: ux500: Fix interrupt cells

Link: https://lore.kernel.org/r/CACRpkdYh9kZJU6PAxghPRGBco_61wRZgUnTZr_3qvySPCo5rBw@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:41:06 -07:00
Olof Johansson
adbb411b97 This pull request contains Broadcom SoCs drivers changes for 5.14,
please pull the following:
 
 - Jiapeng removes an unused variable in the Broadcom STB BIU driver
   causing an unused warning.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmDCbC0ACgkQh9CWnEQH
 BwRCNw//f0lHXZhyZnX0dj5CcJ71JozWb6X34/V0QVGTLKLynEtoEW6QjfImq80V
 Jce85n9rfodFO5X2VyBMNfYzEFy0I90jeJVroJoVsP6jfbmS4pA51UjTj/QlTYMI
 ZZEwFsoZqtRM6VPaEgAw+SfJIkaTTgUGeuFak2A06lELteu5B5K4pkBkDxHE3CHD
 O9bbFekrCTs2N728ougk75v8QSpq6rK7fA/PrRcFE4tq1gDeMFMB7eDI64NiAgxw
 UOgikbIWypN1D3vIcen2nx4zMxcLE9kQ6XJnNL5zL+TvAoxYcMAfEoAM6kV18C7i
 Ov9VjY3/dGnVb5Tizo1MGni2VfzBxEi6N5cBCS+16H5NntPmAg0UikiYJ1Uv7PEL
 xP+1e3IJ3zD9EfOm1eu49Vet9yEURzA0JLnzgPLw2CRBWdP98vdhurVdeSGw9tiw
 wRwOpzaOTqmYnx+/NgLqT9McuLcmM/MSUndsEeSc9aDoMwi3ffdqCcc4EAdkevaB
 m174LFKtoFV+UkKdRkrjUCJu0d5W8uC2UWhytaEVd1HJVeABc9olD9bc5ZOeFC7X
 XaxXOLAqO+uo+u2U92itrquKFkQW7gPAyWuNvp+5htPqnbp4lhyEmOfi0akIoCxG
 kBJ+yBLsZkP5iNRk378Q+fMnTBsHW1qg/WrdeNLQ9e9VUf0dEkc=
 =DjTA
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-5.14/drivers' of https://github.com/Broadcom/stblinux into arm/drivers

This pull request contains Broadcom SoCs drivers changes for 5.14,
please pull the following:

- Jiapeng removes an unused variable in the Broadcom STB BIU driver
  causing an unused warning.

* tag 'arm-soc/for-5.14/drivers' of https://github.com/Broadcom/stblinux:
  soc: bcm: brcmstb: remove unused variable 'brcmstb_machine_match'

Link: https://lore.kernel.org/r/20210610194836.309869-3-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:40:46 -07:00
Olof Johansson
93d84763c1 This pull request contains Broadcom ARM64-based SoCs changes for 5.14,
please pull the following:
 
 - Zhen fixes the Broadcom stingray serial node unit names to fix a DT
   binding warning
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmDCa9EACgkQh9CWnEQH
 BwSGaRAAtLAJ1kD/AlcXGgnjW/l7PLYh6ni7oJbHwGtdisAABF8lYeYTG1d4AY8B
 Dq9n3T1qi3+ZYEpiRx//43A3457ez089/l3Qn5Eu5NWAQ/Fp1BN0hw50/np3dIac
 sxckbQGDamb0m+/nqR7v6pG58MTA+uf0PhW6zkRnhKdY4SujSVzcufwceNJNTA0d
 3i5TlZaGRzgTCjmpASFQHRAgm/vc8fmYls8uSdyCyg1glkc/GyhdVwGpUl4jzw6f
 wg8+0xpft41/gzTu7u/NXBk1TbAVJi2ez4LHaviSgHF47a/y6J/F1N7pzUSGlbFF
 43ZVWXO5G3Wkl32lwiUEEWrA2EWu9rdlofv71RLWBI1s7B4bMGH5bcgw7OsyukV0
 beQro/vPyF1R3wuEiAByQdFa3c104l3Jg1VOTBMKnoQuLE1Di9iSQfbIOnXlr4us
 6WKPGmkgbtBLqkpSjs0rbGWk4w+sAmyIHGPx5bAGcb367yqmpNTNJDLlR93iozPU
 q4zyb08aexxB7CNuSuxwtCb6t75UgmLBX0ow6D985wLlP3VQzm189IIdA8kvpf5l
 NH39QdoFlzHv8ioqsPwhNselxJQUIM0brWm+vxXcTzTR1V8umtJI3ar09de3bLuH
 /2KmgiSjDSodLSSuWDMXg6EQh4MftieRooF0uHJ8f7spvXrYkXI=
 =6wtT
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-5.14/devicetree-arm64' of https://github.com/Broadcom/stblinux into arm/dt

This pull request contains Broadcom ARM64-based SoCs changes for 5.14,
please pull the following:

- Zhen fixes the Broadcom stingray serial node unit names to fix a DT
  binding warning

* tag 'arm-soc/for-5.14/devicetree-arm64' of https://github.com/Broadcom/stblinux:
  arm64: dts: broadcom: normalize the node name of the UART devices

Link: https://lore.kernel.org/r/20210610194836.309869-2-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:40:29 -07:00
Olof Johansson
010bf7346f This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.14, please pull the following:
 
 - Rafal updates the BCM5301x, HR2, BCM63xx, BCM5301x, NSP and Cygnus DTS
   files to resolve a number of DT binding check warnings pertaining to
   NAND, pinmux, clocks, SPI
 
 - Stefan provides a fix for an increase in the DWC2 controller's RX FIFO
   causing regressions on the Raspberry Pi 4B
 
 - Mateusz adds a BCM2711 specific VEC compatible string to allow keying
   off that variant properly
 
 - Stefan adds support for the Raspberry Pi 400 by doing some DTS/DTSI
   re-organization work and finally adding the DTS file proper
 -----BEGIN PGP SIGNATURE-----
 
 iQIyBAABCgAdFiEEm+Rq3+YGJdiR9yuFh9CWnEQHBwQFAmDCa4cACgkQh9CWnEQH
 BwRszA/1Fed5AmheLNW0wEWfEvZ+uACS+jTINXV09rGuU1HZj0qeTv/bO1PJfl4m
 tdSfUWdBTRa0IHeQ9o00GC2Rm/6UJoStAU2rOABw+sKJpH9y+El20xNBnqx5iXzO
 GUlIGbm27S3XWZR5EF6f1ZCej4cJZbpv/Ms9sEHa3b1aT3fJfackiBEk3uyhYX8Q
 fdxG9VNMyZIDOkocWQDeBCD82/IsizN3anFx88FP3vUtTYn/CldCc4H7JDmMzXid
 o3uRTAYta/Ls4z3IsI5hSWZ5+Psv7rbO+Qa/crPZm0SKzPIxQ7drglRJkbMtRSJu
 E27+9bzdLq4ruvUdJF/Wa1B2FKvk4kPtdMRwvStV7hoMrR9+DJ9S2trUUS4aehbx
 /keSHahZSbwWuWtHlmkmsqjTSAxFHsFVfCE3tM9qUo8uWjtxYA+6JyWW4SRw9/nw
 IOcRdxCeLYI29rWeACRjJ2XXXlwHLZWvZr1OrJVwJM2lMxKgLVqiQ38+O8uHDIEx
 CVZE0IM5CqAy5nusOs4jibfBJrbnhhst77j3pDeqkjo/Nv2f2GcxEciw8D+uH+tU
 4mj7sT4nQGSj3+lGtFml+s4MwBcbClcoep3VfIm+30JF41Xwa6Knv3+okJKM0DJK
 VX/pCBkov6QuOwS2P3KIFxHGtamlzJnz4hu6zpOiuJVZoxqdGQ==
 =ZmMv
 -----END PGP SIGNATURE-----

Merge tag 'arm-soc/for-5.14/devicetree' of https://github.com/Broadcom/stblinux into arm/dt

This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.14, please pull the following:

- Rafal updates the BCM5301x, HR2, BCM63xx, BCM5301x, NSP and Cygnus DTS
  files to resolve a number of DT binding check warnings pertaining to
  NAND, pinmux, clocks, SPI

- Stefan provides a fix for an increase in the DWC2 controller's RX FIFO
  causing regressions on the Raspberry Pi 4B

- Mateusz adds a BCM2711 specific VEC compatible string to allow keying
  off that variant properly

- Stefan adds support for the Raspberry Pi 400 by doing some DTS/DTSI
  re-organization work and finally adding the DTS file proper

* tag 'arm-soc/for-5.14/devicetree' of https://github.com/Broadcom/stblinux:
  arm64: dts: broadcom: Add reference to RPi 400
  ARM: dts: Add Raspberry Pi 400 support
  ARM: dts: bcm283x: Fix up GPIO LED node names
  dt-bindings: arm: bcm2835: Add Raspberry Pi 400 to DT schema
  ARM: dts: Move BCM2711 RPi specific into separate dtsi
  ARM: dts: bcm283x: Fix up MMC node names
  ARM: boot: dts: bcm2711: Add BCM2711 VEC compatible
  Revert "ARM: dts: bcm283x: increase dwc2's RX FIFO size"
  ARM: dts: BCM5301X: Fixup SPI binding
  dt-bindings: clock: brcm, iproc-clocks: convert to the json-schema
  ARM: dts: BCM5301X: Fix pinmux subnodes names
  ARM: dts: Hurricane 2: Fix NAND nodes names
  ARM: dts: BCM63xx: Fix NAND nodes names
  ARM: NSP: dts: fix NAND nodes names
  ARM: Cygnus: dts: fix NAND nodes names
  ARM: brcmstb: dts: fix NAND nodes names
  ARM: dts: BCM5301X: Fix NAND nodes names

Link: https://lore.kernel.org/r/20210610194836.309869-1-f.fainelli@gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:40:09 -07:00
Olof Johansson
52b54b06a4 STM32 DT updates for v5.14, round 1
Highlights:
 -----------
 
 MCU part:
  - Fixes for Yaml verifications
 
 MPU part:
  - Configure qspi's mdma transfer to block for stm32mp151
 
  - ST boards:
   - Fixes for yaml verifications
 
  - DH boards:
   - Fixes for yaml verifications
   - Rework of LAN8710i on DHCOM SoM to fit with requested reset sequence.
 
  - Odyssey boards:
   - fix Sd card detectection (gpio line updated)
   - fix eMMC VQMMC suuply (use vdd instead of v3v3)
 -----BEGIN PGP SIGNATURE-----
 
 iQJRBAABCgA7FiEEctl9+nxzUSUqdELdf5rJavIecIUFAmDCMKAdHGFsZXhhbmRy
 ZS50b3JndWVAZm9zcy5zdC5jb20ACgkQf5rJavIecIUdZA//XsO0pAZ3njAtMmUG
 +nFc6a84dS1GJVpaaMVUlvlEe2AEeeqNbrUJem5b2AaxOPH8nS1/9iIvr55mJS38
 kp6YP2oRAShwbtjcBZUVDKli9yYWVptvwgySPyYDA55TnbgTwVd8uTtJ2B4UqSME
 2AWaUjsUWsooJN/+p558w+FNBbSNTcDJg3CdKYNUt07wFRSPARI4Kx7EDzqsbGSS
 452RSTN5lUVJslpJUzu7FEEzUGIX4TmYz2aXwlx2BKPUWfAk5iCZGTb6hk7yNZDK
 fJHFxTyz+7LJ+L1jKxYLEyrYIx7UpXQIqePKRGSUOC5W7DRc7zBr+aMtpEVkIAlN
 dIWbGZaaAJMysCHz/7IQO6SO3P61OPSjAPLkXNp4xN7YJ/t39i3h67GRAy1CdWz/
 qJ7lhlfWJAKsXEwI0jIxIy/w7EV0WgqGD+BGGN7UcxwfBDF/mDPuWvv5WgKO9cQW
 mCbXn0Ifs0tI0pyWX60o1B/GigXaR/aYBdFvuel4T69NgIZZwlKQiAzvBPv5KE43
 vRh2ZoShILPyezpuvkyqtfEYzdv5iPoEyH4YcpqmK7NcCchqBUSfTGTBT/8BFG6d
 zzm5mBDOQiNnayFClAZ+pf1z1IVpfV9q5FAKLicWL6mEjWX9Wm3NnexDloJgZTb3
 y+q2pEKpBnzc2kXwTc2jIyZdcO0=
 =RUQs
 -----END PGP SIGNATURE-----

Merge tag 'stm32-dt-for-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt

STM32 DT updates for v5.14, round 1

Highlights:
-----------

MCU part:
 - Fixes for Yaml verifications

MPU part:
 - Configure qspi's mdma transfer to block for stm32mp151

 - ST boards:
  - Fixes for yaml verifications

 - DH boards:
  - Fixes for yaml verifications
  - Rework of LAN8710i on DHCOM SoM to fit with requested reset sequence.

 - Odyssey boards:
  - fix Sd card detectection (gpio line updated)
  - fix eMMC VQMMC suuply (use vdd instead of v3v3)

* tag 'stm32-dt-for-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
  ARM: dts: stm32: fix stpmic node for stm32mp1 boards
  ARM: dts: stm32: Rename spi-flash/mx66l51235l@N to flash@N on DHCOM SoM
  ARM: dts: stm32: Rename eth@N to ethernet@N on DHCOM SoM
  ARM: dts: stm32: Drop unused linux,wakeup from touchscreen node on DHCOM SoM
  ARM: dts: stm32: fix the Odyssey SoM eMMC VQMMC supply
  ARM: dts: stm32: add a new DCMI pins group on stm32mp15
  ARM: dts: stm32: fix ltdc pinctrl on microdev2.0-of7
  dt-bindings: net: document ptp_ref clk in dwmac
  ARM: dts: stm32: move stmmac axi config in ethernet node on stm32mp15
  ARM: dts: stm32: fix i2c node name on stm32f746 to prevent warnings
  ARM: dts: stm32: update pinctrl node name on STM32 MCU to prevent warnings
  ARM: dts: stm32: fix timer nodes on STM32 MCU to prevent warnings
  ARM: dts: stm32: fix RCC node name on stm32f429 MCU
  ARM: dts: stm32: fix gpio-keys node on STM32 MCU boards
  ARM: dts: stm32: fix stm32mp157c-odyssey card detect pin
  ARM: dts: stm32: Configure qspi's mdma transfer to block for stm32mp151
  ARM: dts: stm32: Fix touchscreen node on dhcom-pdk2
  ARM: dts: stm32: Remove extra size-cells on dhcom-pdk2
  ARM: dts: stm32: Rework LAN8710Ai PHY reset on DHCOM SoM

Link: https://lore.kernel.org/r/e4bfb255-63fb-74a8-d591-eb09821c93ee@foss.st.com
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:39:42 -07:00
Olof Johansson
05a3a76766 Samsung mach/soc changes for v5.14
1. Fix: add missing of_node_put.
 2. Extend Samsung maintainers entry to cover Samsung PWM driver files,
    because they do not have a dedicated entry.
 3. Minor cleanups.
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmDBwOMQHGtyemtAa2Vy
 bmVsLm9yZwAKCRDBN2bmhouD15tMD/4hWWbo1e7CR2efMP+211Br4AOxUmmFIxsu
 JuKScQgV/U0OCHf9Djo+fyKp6gWhhuQcg8HHlTV8XWsq6a+JnTdnw1y/glPhBMY4
 qApL5o/k4VqPl71QJnwyD4bbPyiMB/2xMr9StFFYsrYBHwp0htRawRUxJsTBffuM
 FRZYuHHNlVU1Ukv8ejjKLgLG7zuohzhj6bO6c8ZxbRbgRHTwy3t7wQVhl/4OBfKH
 qrR1V8EBUlgpebaTRmZNVImBKNhhKCf4t/fkb3iNxO5xVKRkgwSUHxdVBA1Y1kAo
 tzp02wCc+y5fVG/dSE+81iO3//Ylgn79tYeLzzpBxU6EYsK8ELN60jiIj/ADsX2K
 3CZb2wUubBqVCxYcal1l1tnFZe3re/fhFdXvrVY6qatp04TbzBT7f8zu+DoVqZuJ
 kQ6VoaAtnGB7qL8TiCPwf1hv6nGjllv184NGDdnoy+QP9ZvruT++xcS0hMZJOYnl
 pphwlYjLwrfhETZYiVylaT4GlLWk05Qzsp1bkpMs9z3g+0MBZ5GiNF3BQQ7UNSba
 Op5XZge0Ix+gSUGtecfrmNWhsqxRLDk4jWcc9cVKImDKJinhDFaTmpSDcCJ/60eF
 Gs0I1Q4Gbunydd+R5SjMw5Ci52pXj73Rn+KFr3BsEV8t7lQvFADbrngP3I0OTUeI
 vFUW5m6USA==
 =PXfC
 -----END PGP SIGNATURE-----

Merge tag 'samsung-soc-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/soc

Samsung mach/soc changes for v5.14

1. Fix: add missing of_node_put.
2. Extend Samsung maintainers entry to cover Samsung PWM driver files,
   because they do not have a dedicated entry.
3. Minor cleanups.

* tag 'samsung-soc-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  MAINTAINERS: Include Samsung PWM in Samsung SoC entry
  soc: samsung: pmu: drop EXYNOS_CENTRAL_SEQ_OPTION defines
  ARM: exynos: add missing of_node_put for loop iteration
  ARM: s3c: Remove unnecessary break in RX1950

Link: https://lore.kernel.org/r/20210610074055.12474-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:39:08 -07:00
Olof Johansson
523ad4e349 Samsung DTS ARM changes for v5.14
1. Several cleanups and alignment with dtschema.  This includes removal
    of unused properties and fixing LED brightness property.
 2. Enable PMIC RTC interrupt as a wakeup source (intended to wakeup for
    example from Suspend to RAM where the PMIC RTC's power is still
    supplied).
 3. Disable unused/not implemented camera on GT-I9100.
 -----BEGIN PGP SIGNATURE-----
 
 iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmDBwF4QHGtyemtAa2Vy
 bmVsLm9yZwAKCRDBN2bmhouD12lfD/sFwwIIAupFxyliXJuHuwluPZTvZ1bKlBjv
 AeIOFedlYQTNNo6cR9+LtMEA0on9E/HWPA3qarSgbfpOCQ1VX6lUOOdeaLnYLeay
 haciQaz7y/fS+tlRvap9HSCCNQ+HQSIynexotY/T0aqIa/XKGTiHgafqI/uGW15W
 7I2dUm0ecE0l8BRtZ8we6LMHHiltQF5XhiDM/5TI8rZofxa9maEAl6tYRfcbvkyZ
 BccZ4DalLHNhhHWOsfc5Jk/g9WxVt645xG2uebycAtuwq3m+ruzUjMzCWzQtSmIo
 wydGmOPALagONfykQWQgxlDuSKSJcn4sC2Kjna6qPvDHnhmoIU1gZmj07e+s5LdJ
 oEziCsYzLy3jdrZCNqLHkNSFxjkn5UH3O5R4fC8Y1e2zEGX2sA8T5Kz5IwLRssnZ
 ndTgdULjqVMm06mNnr7YhFeaWlLdphbW1DSP10MkyNEdhQ+9rCdZK76VA4m+1AkV
 ATDUNOsqq1mqvDh485i9057ohPSaA2T20NjB6h41a298Z/EELgxywQBpsW6a2rGT
 rOjZQOJxduViu3dn06faNDoEF6wYUWcnKAlwdyBNySOCHeEKUfvvF8cCzDtzwyFr
 qMZs2B9dnFw17w4wPcePpPu0E/9skjc5PEGg0MudTKhDsKsK7rSRSe1QVoC2FtDs
 /ELVDeUslg==
 =8yS0
 -----END PGP SIGNATURE-----

Merge tag 'samsung-dt-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt

Samsung DTS ARM changes for v5.14

1. Several cleanups and alignment with dtschema.  This includes removal
   of unused properties and fixing LED brightness property.
2. Enable PMIC RTC interrupt as a wakeup source (intended to wakeup for
   example from Suspend to RAM where the PMIC RTC's power is still
   supplied).
3. Disable unused/not implemented camera on GT-I9100.

* tag 'samsung-dt-5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: dts: exynos: Disable unused camera input for I9100
  ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid XU3/XU4 family
  ARM: dts: exynos: enable PMIC wakeup from suspend on SMDK5420
  ARM: dts: exynos: enable PMIC wakeup from suspend on Arndale Octa
  ARM: dts: exynos: enable PMIC wakeup from suspend on P4 Note
  ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid X/U3
  ARM: dts: exynos: enable PMIC wakeup from suspend on Midas
  ARM: dts: exynos: enable PMIC wakeup from suspend on Odroid XU
  ARM: dts: exynos: enable PMIC wakeup from suspend on Arndale
  ARM: dts: exynos: enable PMIC wakeup from suspend on Origen4412
  ARM: dts: exynos: enable PMIC wakeup from suspend on Itop Core
  ARM: dts: s5pv210: remove unused Atmel touchscreen properties in Goni
  ARM: dts: exynos: fix PWM LED max brightness on Odroid XU4
  ARM: dts: exynos: fix PWM LED max brightness on Odroid HC1
  ARM: dts: exynos: fix PWM LED max brightness on Odroid XU/XU3
  ARM: dts: exynos: replace legacy MMS114 touchscreen x/y properties in GT-N7100
  ARM: dts: exynos: align Broadcom WiFi with dtschema

Link: https://lore.kernel.org/r/20210610074055.12474-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:38:12 -07:00
Joel Stanley
c5f05415b9 ARM: config: aspeed: Add DEBUG_FS and EXT4
DEBUG_FS was lost way back in v5.5, and EXT4 is used by ast2600 systems
that have MMC.

Link: https://lore.kernel.org/r/20210610045338.99847-1-joel@jms.id.au
Fixes: 0e4a459f56 ("tracing: Remove unnecessary DEBUG_FS dependency")
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210603040906.125109-1-joel@jms.id.au
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:36:39 -07:00
Olof Johansson
131dc51df2 ASPEED device tree updates for 5.14
- IBM Rainier and Everest LED descriptions. These systems have a large
    number of LEDs attached via expanders.
 
  - Ampere Mt Jade updates, as OpenBMC bringup continues for this
    machine.
 
  - Updated 64MB flash layout for systems using OpenBMC on NOR root file
    systems.
 
  - Support for HS200 MMC on AST2600 EVB. This is only supported from A2,
    so a new device tree is added to support A0 and A1.
 
  - Update all command lines for early serial output.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE+nHMAt9PCBDH63wBa3ZZB4FHcJ4FAmC+yGwACgkQa3ZZB4FH
 cJ6ZrRAAgal3QKAy7GM4WVvfrWGrl4ecOSRPtGpb3v9g++iWEgtp9QOWTDjK+oNc
 3xYBHDtUZgc4ay0cfH2A+PvRFIaHNpq9833dMrlLLJNd3pc4FUxWq8hfRLj84LCg
 lhUkTAoBgAfxhr7hV/q2WpegFjYiCpofodPFlL1LWP8fqjcRmp5QGX0w/nqlpKNO
 6LAGmEgxlut3H8ZWSs1eom36jR8XfOpi9O0+qWljuGOVIXyzQr7j3H05ulGEaSFZ
 AIJ4e4r5+sGWlslu+lDYC6yeEvhvV1KO8QHcFTwGtjam6Ov3TZgHHwmCWCGIbmjI
 9UV8/bpbtbBsxCX7B1/sfkPt3hiIbAY8clBVJeMah0npmrdVX/KmaT5x5o8rSqdC
 9jb37OSiJicOwV57HkbZcOrShHBlfDvatgxyvlJu2P/omAqNH1jhZSTV75QFEQIG
 sqRCSY/axtQs9B9zN08RCMSASoSge3f/gNdXxdJkEJsb5IlWDCFsYwVL4VqbB9Nm
 zr/qZsVQGRCQYoG9e/FiDbYIKWwKzZfQdZs0ogjSj28KBEmxUROdNXh44HEBn8s/
 U3lmX76v8kX/Mez4GlCCrxwr+oTJzVhlO9md17TFQ9tEid1q7d9+ar+ZSDb/1ZwL
 pds1j8lUZBgqG+dMWhysd/s9Ppc3rptwS8xORQKbm1uiOLvo7Fg=
 =UxVn
 -----END PGP SIGNATURE-----

Merge tag 'aspeed-5.14-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc into arm/dt

ASPEED device tree updates for 5.14

 - IBM Rainier and Everest LED descriptions. These systems have a large
   number of LEDs attached via expanders.

 - Ampere Mt Jade updates, as OpenBMC bringup continues for this
   machine.

 - Updated 64MB flash layout for systems using OpenBMC on NOR root file
   systems.

 - Support for HS200 MMC on AST2600 EVB. This is only supported from A2,
   so a new device tree is added to support A0 and A1.

 - Update all command lines for early serial output.

* tag 'aspeed-5.14-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
  ARM: dts: aspeed: everest: Add pcie cable card indicator leds
  ARM: dts: aspeed: everest: Add vrm and other indicator leds
  ARM: dts: aspeed: everest: Add dimm indicator leds
  ARM: dts: aspeed: everest: Add pcie slot indicator leds
  ARM: dts: aspeed: everest: Add nvme and fan indicator leds
  ARM: dts: aspeed: everest: Add system level indicator leds
  ARM: dts: aspeed-g5: Add SCU phandle to GFX node
  ARM: dts: aspeed: Everest: Add directly controlled LEDs
  ARM: dts: aspeed: Rainier 4U: Remove fan updates
  ARM: dts: aspeed: Everest: Fix cable card PCA chips
  ARM: dts: aspeed: Grow u-boot partition 64MiB OpenBMC flash layout
  ARM: dts: aspeed: mtjade: switch to 64MB flash layout
  ARM: dts: aspeed: mtjade: Add PSU support
  ARM: dts: aspeed: mtjade: Enable OCP card support via NC-SI
  ARM: dts: aspeed: Set earlycon boot argument
  ARM: dts: aspeed-g6: Add pinctrl settings
  ARM: dts: aspeed: ast2600evb: Add dts file for A1 and A0
  ARM: dts: aspeed: ast2600evb: Add phase correction for emmc controller.
  ARM: dts: aspeed: ast2600evb: Add sdhci node and gpio regulator for A2 evb.

Link: https://lore.kernel.org/r/CACPK8XduV9F=piu1qh56g+YNOZOBYTW7b2Y=XVYafpYDwWmDYA@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:35:47 -07:00
Linus Walleij
e6f600e72e ARM: dts: ixp4xx: Add crypto engine
Add the crypto engine as a child of the NPE.

Link: https://lore.kernel.org/r/20210605161007.3397216-1-linus.walleij@linaro.org
Cc: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:34:36 -07:00
Olof Johansson
c7259477fe Amlogic ARM64 DT changed for v5.14:
- set 128bytes FIFO size on uart A
 - add Banana PI BPI-M5 board dts & bindings
 - meson-sm1: add toacodec node to use internal audio DAC
 - enable hdmi audio loopback on VIM3 board
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmC3ROkACgkQd9zb2sjI
 SdEoLA//QynD87m8KxB3gOhPj2vkhOVxBFtvFEWSBcNGsnmPgSooyyyv7GCJWafd
 VGuspMttT9juAIbRWdrH4LbjRVR3FkqS9HhVhYTKFHERPB6n333tJf2idBCD2yMC
 x9xFw6F+9+KGstof3wbLhxu4slSR3GtT79kEt+k6GclRe/019IIBr2IGgQtP9Tiw
 CPToDliay/cdPpsxI4+2hnVmLbdY8HNneOvAgzwiyaQBWAtBIkObwT+aH2V8676m
 3exhOQyHXjAwi6Y2We74XZ+RLNc9g7eGpa1WvsvwEpS4+i6SCuBnBMOKwt5prKaM
 V7D3ppJ5tSvaxkD2MO1bOQ0nmIfOHH4wcjvYlKH5djGZrEF/lGS9qzwes2W8kcCz
 t/NtX/n/nEKdHbni3zkd9MjPradmZRUa1x6aJ7BH5N1JDVC2qwUmDR0mZAJx3CiG
 TXDLMNi0USJUBz1Xuih2zCPCoPSJbjVwE3TwywiLLQssV0WjTCPyBsPm715vC9b7
 YJDf9TlbtsPI0MVDWMf0RAE6zyQCd6Gc0E52ZImY8zasBa51haFkPbD+6hXk5nWL
 MnhnLXlEgkBtPPaVKaIfQdnUdpoEHmhjzPDWpGOmI1Q2XEUx3xCg1giKWM/NkC00
 DB2PufIF9MLmPg2RSTzq7GgicFxUVJpUkck3w4c0zclBZOEJWMc=
 =KYEO
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-arm64-dt-for-v5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/dt

Amlogic ARM64 DT changed for v5.14:
- set 128bytes FIFO size on uart A
- add Banana PI BPI-M5 board dts & bindings
- meson-sm1: add toacodec node to use internal audio DAC
- enable hdmi audio loopback on VIM3 board

* tag 'amlogic-arm64-dt-for-v5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
  arm64: dts: meson: set 128bytes FIFO size on uart A
  arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts
  dt-bindings: arm: amlogic: add Banana PI M5 bindings
  arm64: dts: meson-sm1: add toacodec node
  arm64: dts: meson: vim3: enable hdmi audio loopback

Link: https://lore.kernel.org/r/bb207cf8-fc7a-3121-eea8-56618b5952aa@baylibre.com
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:34:14 -07:00
Olof Johansson
bcac3fb57a Amlogic Drivers updates for v5.14:
- soc: amlogic: meson-ee-pwrc: Rename "get_power" to "is_powered_off"
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEPVPGJshWBf4d9CyLd9zb2sjISdEFAmC3Q28ACgkQd9zb2sjI
 SdH4IxAAvvXynQ8TeC2jUItrGM+2+OOvKmUmMX2vWqi1XhILLRXO9BMGORiLc38q
 BbSIcV0PxPlp3oDNriX9Y1yZbOKji5yYO2g9xsK8EVSLmf56IcY988Sg5v09fahV
 rTe+bTcrKJ5ZFi1a36m5HmLHsrxsdzIFnPu9CTGg2fURre/pX/WmHmLu1yNcelkJ
 Ij5xy6mJrM1IainbdyvylULAozjcSFaYI/Vmz+WkqfUDvB2dpYwjioJju0T/sf9h
 ZgGh7WVj+CSSGpquTRT4k2t9eycpmSk/OmRBIavqI2p+ZULHGzHUJEFRw9tShLUA
 ZXu94pQy3pWx6At3IjQztAOPD+Wt38Sf8haT/04GggitVqeOKHHifD8PXNORa1nc
 /eS/URC+6OTo4a5cMUibgj3R9QSs9cEOp3tYL27vY812yVlhHHXAyWhyz9RT4t2T
 EB25xBnnqBJ4jvzNW+q6oWpGcMJSRcpUVzyu6i3bTUS+IoshjOUdifrmgUfFC1yK
 j69+/2fwDDxqYTsQJYRy2vpDFx97/nxkX2IJQZZc7PDy2xcOZtyyQ8ah8f17Q9eh
 GN2PKGj7DJcT6HH5IW3X16+anLGUcP+BS1soJZE1aEwlGDi2TPwAJzUQkv38eDj+
 Uc3b2cmzzIKpDJxU7o7dD35ur7l+HfhtGThVyEzptsGcxs1bKWA=
 =MXNF
 -----END PGP SIGNATURE-----

Merge tag 'amlogic-drivers-for-v5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into arm/drivers

Amlogic Drivers updates for v5.14:
- soc: amlogic: meson-ee-pwrc: Rename "get_power" to "is_powered_off"

* tag 'amlogic-drivers-for-v5.14' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
  soc: amlogic: meson-ee-pwrc: Rename "get_power" to "is_powered_off"

Link: https://lore.kernel.org/r/58283600-2d9a-c259-4d80-6915e6e6c79e@baylibre.com
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:33:47 -07:00
Olof Johansson
2d08a11e2d Devicetree changes for omaps for v5.14 merge window
Mostly just clean-up for device tree binding checks with
 few other clean-up patches:
 
 - Drop ov5640 sensor for dra76-evm, it's just one of the
   optional additional sensors and makes hard to use any of
   the other options, TI is using the devicetree overlay
   snippets for these
 
 - Group the phandles in osd3358-sm-red to make the files
   more readable
 
 - A series of gpio clean-up patches to follow the binding
   documentation
 
 - Move ti,no-reset related properties to the target module
   level, the ti-sysc driver handles them also in the child
   but they really belong to the target module
 
 - Drop the unnecessary uart compatible entries to make the
   binding check to work
 
 - Mailbox related updates to make the binding check to
   work
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAmC3L5MRHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXPhRA//cMe7qi3Tsfz7ASz9Gm3tAN1OgdmCjy35
 ucxmnTfUCEqCodY9K4iufRLJOtY61s/AlzO5KfZQqv17X/fnfSjccHnpZC7QNpnG
 SxPj6yl5i++1KCQNDUle03B2Yp1aTdDGXmcTsGh1quKWnLHdD3nzlMunMYDsp9Mv
 tBC/Euqo7hjMZLnB+7M5l2V1gx4kCPYlfZZCzkVAPJKWlsnlLrWvq9LugXb6YLae
 VgpTa+Hi5ODL1l4BmjmWoVXRer7giL/UPkFUgBh+6uLr0t7ouuh498kZK0kcWhBv
 Y43X8gAZhYIsVuQEgjy79B8MEFFJwOBmknngY/9rkPgqKWg3ee/qPbzyRNQ82cE6
 zoZBu5USvcmlSjUWS6NS1FY5M9+QwAtH6l0k6UNzZRYX/11+QhSxHeiuOzOl6h+8
 Rpu1NUMS4JA3jnlvCBoys6hTACRVq0ohYxeSQrcZoww60Ltvi99MPtswNTOaGGdK
 Cq6qL2PxYvlkmFcqGdxHnktGdx4HUybvkwYPCrs0avSfvvBq7fOfCIqT9ZULSxvj
 qCINTvVy0mDpggHImD8MyKxKYTWzXhgqIk6J0rI9h920l6Y6hFiwURJdYNZYEGsW
 nrvwa71Z6urDLr5s1JlgM06w0/hUXfwTt+4F6B9hRXT5ad2jz++8YMAr38f2dDOx
 xVfaAb3UNhM=
 =5lho
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v5.14/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/dt

Devicetree changes for omaps for v5.14 merge window

Mostly just clean-up for device tree binding checks with
few other clean-up patches:

- Drop ov5640 sensor for dra76-evm, it's just one of the
  optional additional sensors and makes hard to use any of
  the other options, TI is using the devicetree overlay
  snippets for these

- Group the phandles in osd3358-sm-red to make the files
  more readable

- A series of gpio clean-up patches to follow the binding
  documentation

- Move ti,no-reset related properties to the target module
  level, the ti-sysc driver handles them also in the child
  but they really belong to the target module

- Drop the unnecessary uart compatible entries to make the
  binding check to work

- Mailbox related updates to make the binding check to
  work

* tag 'omap-for-v5.14/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: OMAP2+: Replace underscores in sub-mailbox node names
  ARM: dts: AM33xx/AM43xx: Rename wkup_m3 sub-mailbox node
  ARM: dts: OMAP2/OMAP3: Rename processor sub-mailbox nodes
  ARM: dts: OMAP2420: Drop interrupt-names from mailbox node
  ARM: dts: am437x-l4: Drop ti,omap2-uart entry from UART nodes
  ARM: dts: dra7-l4: Drop ti,omap4-uart entry from UART nodes
  ARM: dts: am335x: fix ti,no-reset-on-init flag for gpios
  ARM: dts: am437x-gp-evm: fix ti,no-reset-on-init flag for gpios
  ARM: dts: am57xx-cl-som-am57x: fix ti,no-reset-on-init flag for gpios
  ARM: dts: dra7x-evm: Align GPIO hog names with dt-schema
  ARM: dts: omap5-board-common: align gpio hog names with dt-schema
  ARM: dts: omap3: align gpio hog names with dt-schema
  ARM: dts: am437x: align gpio hog names with dt-schema
  ARM: dts: am335x: align GPIO hog names with dt-schema
  ARM: dts: osd3358-sm-red: group in the same phandle all its properties
  ARM: dts: dra76-evm: remove ov5640

Link: https://lore.kernel.org/r/pull-1622618286-677305@atomide.com-3
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:33:23 -07:00
Olof Johansson
3082a78502 Defconfig changes for omaps for v5.14 merge window
Defconfig changes for omap2plus_defconfig to add WL1251
 and LP5523 as loadable modules for n900.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAmC3LSMRHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXP4IBAAlbyOGk0t2ImMRJQzOQP1AVXLUo7cxOyF
 SiFA9KmOZrx53syr2iAcFPQ/Eio4eK9AapYEBBxRBbjrrpPjgeFBcOn6vy5SzLRI
 ZM1rmhQIsRkYoNY1VICjRtvJYbnRV2cJevrim4BzL2umA259n2HvpHDoHb25HQtv
 nUnCviLgVr6mzgFg8okDBrWXcSpk+bU2WKgvHFOjy5l3sLH1nvmP9PigzCxlHDWI
 L52m0WBsBEGDuJWkIP2f1VW3+pS1TyewEAObpL8dyI1bLdizyvs9suPWW/OnkUoh
 eKF8qR6i5dXBCmGY3GHyhKTO3ZiGJYOknGDE6v4PVOxcNWhyuSFVU7Aox0hlYSrP
 McL87Z4QFQk4CQNnV1MgaEA9FdWQHrGqZOQiCy+AVZaHWinKhnAWO9Fz9if863rR
 6nnqLWuRFyXOf7Kz/gywC8jaI51HDI5D1cEXAbZumje1NMOSwj+owkHAxBmqytc7
 CvUpzIu/qRNpskDwEgBAqyH8Z465b+zs8aI9WUKQsdIOftaDHKElO9hHehCAbxP4
 O3auRl0+Lp4tAReHD4AivytY/a2fvbweJxnrs2ideb3kTgbM7erv5zbjWi+CcvCv
 GdFkyRbNQR4LN2dHLhlgGaay5mrMsPQ4UvYdzV3zsvjtu/OxGgECDHsENrFT2037
 HWq6MSqaZYE=
 =bKhk
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v5.14/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/defconfig

Defconfig changes for omaps for v5.14 merge window

Defconfig changes for omap2plus_defconfig to add WL1251
and LP5523 as loadable modules for n900.

* tag 'omap-for-v5.14/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: omap2plus_defconfig: Add LP5523 LED driver
  ARM: omap2plus_defconfig: Add WL1251 and WEXT modules

Link: https://lore.kernel.org/r/pull-1622618286-677305@atomide.com-2
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:32:57 -07:00
Olof Johansson
8639a12370 Clean up changes for omaps for v5.14 merge window
With the recent changes to drop legacy platform data for
 am3/4, omap4/5, and dra7, we can drop the related unused
 code. There is also a patch to remove leading spaces from
 the Kconfig file.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAmC3LIERHHRvbnlAYXRv
 bWlkZS5jb20ACgkQG9Q+yVyrpXNxnRAA2Sivq3pGG05XbTYSJ+Q5UD86l7bxrp7O
 6nsS0WHUr3TgvHOnxuIwBzGAFO7MRkv7gCRj3vBHspiDen38sjpwtk+t7RpnygPA
 1SccXMdau0a4zYu8s3GMGPEs+ojy0gpmXEXq16hxToKGwfyMMGZl0coMpru8yw6A
 AqukqpFBzFVNHFPZKBvEHiL+wZ+fz8u3parX2kfJzlBFYa8y5RduRobEgyON2w7o
 8S2B1LFrNkNGz+UzOiHVdfHzqHlXkrfpLvttxMNpSweiYgQwZf9do0Q70oz0TTOB
 1DJMYoQptkp0g0o2p2is+QRbj5yuTBEqXfCyoJeiWoXZF9MwDp5A82PseBn01arc
 eKw2uwM91Hw6mk3dWx5dl2dg9s8m8KSW68jpPgP73WJodl+sXTasfIeRBiTAIpFx
 lY+aG+TrM5ab3nV0pIEa6VaC0q6XpfJej4EY9LSgxQi8/+nTTpO8q2wfsoWrjTyf
 Ze5Wf7f0vZWO3AxzQOhIXUlDB0c+/CN4XXN8sVy/m8lRaSPe9CRt4z2m9njXXwC/
 jB2GpF82rT+VRdafmnxAgT1PznaP5LPTviuSj8dAPVXMZZKC49x89xHpa10kwQFd
 QOO7V7+2l8g0YNwb6ILHaL+sZIwxIAIcMnE3p55k3XkgbCeZEZvHyc3Hqrk+pgg4
 D8Z173aLVHI=
 =8/VK
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v5.14/cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/soc

Clean up changes for omaps for v5.14 merge window

With the recent changes to drop legacy platform data for
am3/4, omap4/5, and dra7, we can drop the related unused
code. There is also a patch to remove leading spaces from
the Kconfig file.

* tag 'omap-for-v5.14/cleanup-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: OMAP2+: remove omap2_set_globals_control()
  ARM: OMAP2+: CM: remove omap2_set_globals_cm()
  ARM: OMAP1: Remove leading spaces in Kconfig
  MAINTAINERS: remove obsolete OMAP HWMOD DATA FOR OMAP4-BASED DEVICES

Link: https://lore.kernel.org/r/pull-1622618286-677305@atomide.com
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:32:36 -07:00
Olof Johansson
09159b8025 Renesas ARM DT updates for v5.14
- GPIO extender support for the Falcon development board,
   - Switches support for the ALT development board,
   - Miscellaneous fixes and improvements.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYLCiTgAKCRCKwlD9ZEnx
 cNB6AP40CBtMLlW/h/DGCvm3iW8bRwHrBiuXeYrcHeJh1DoXFQEA3foLN4s5FZIQ
 ZXFFOAgGVMHQft1o0qL0nO0ytw7zhg8=
 =YIvB
 -----END PGP SIGNATURE-----

Merge tag 'renesas-arm-dt-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt

Renesas ARM DT updates for v5.14

  - GPIO extender support for the Falcon development board,
  - Switches support for the ALT development board,
  - Miscellaneous fixes and improvements.

* tag 'renesas-arm-dt-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  ARM: dts: alt: Add SW2 as GPIO keys
  ARM: dts: renesas: Move enable-method to CPU nodes
  arm64: dts: renesas: beacon: Fix USB ref clock references
  arm64: dts: renesas: beacon: Fix USB extal reference
  ARM: dts: rcar-gen1: Correct internal delay for i2c[123]
  arm64: dts: renesas: eagle: Add x1 clock
  ARM: dts: koelsch: Rename sw2 to keyboard
  ARM: dts: r8a7779, marzen: Fix DU clock names
  arm64: dts: renesas: v3msk: Fix memory size
  arm64: dts: renesas: condor: Switch eMMC bus to 1V8
  arm64: dts: renesas: falcon-csi-dsi: Add GPIO extenders
  arm64: dts: renesas: beacon kit: Setup AVB refclk
  arm64: dts: renesas: Add fck to etheravb-rcar-gen3 clock-names list
  ARM: dts: renesas: Add fck to etheravb-rcar-gen2 clock-names list

Link: https://lore.kernel.org/r/cover.1622188835.git.geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:26:57 -07:00
Olof Johansson
3f43257e3c Renesas ARM defconfig updates for v5.14
- Refresh shmobile_defconfig for v5.13-rc1
   - Enable R-Car USB2 clock selector support
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYLChcAAKCRCKwlD9ZEnx
 cH0xAQDKjUogB7W9c/K9I5+zNyqAtWvf3aqfrlBV0wnOvPk4jgD/Siph1MbVJacv
 VQFV8LS4Ip7+RKJ1cPexHvVIW5DAxwg=
 =+ks9
 -----END PGP SIGNATURE-----

Merge tag 'renesas-arm-defconfig-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/defconfig

Renesas ARM defconfig updates for v5.14

  - Refresh shmobile_defconfig for v5.13-rc1
  - Enable R-Car USB2 clock selector support

* tag 'renesas-arm-defconfig-for-v5.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
  arm64: defconfig: Enable usb2_clksel for R-Car Gen3 and RZ/G2
  ARM: shmobile: defconfig: Refresh for v5.13-rc1

Link: https://lore.kernel.org/r/cover.1622188834.git.geert+renesas@glider.be
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:25:59 -07:00
Olof Johansson
b7c8bde730 Gemini device tree updates for the v5.14 kernel:
- MAINTAINERS fix for the DTS files
 - Drop a duplicate ethernet node on the RUT1xx DTS
 - Add device_type to the PCI node
 - Fix up some DTS syntax so it agrees with the schemas merged
   for the v5.14 merge window
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmC1/9kACgkQQRCzN7AZ
 XXMSLBAAugeri80b/5oax7hracTYZrk3+H6t7dWOjkn1nq8xTgyg2hvykM12xOQU
 RQQC0WjD3zkX2LUY1CBWPiz1m5+9RUZKQUX+TKhkWHD9qyOAa3m/TPBS0dTTVocy
 OsEX/cxlbZu3up7y0KEUBdinuMY1BuhPCzsGS1bwB+COLYpxRkeNgjJMi9ntAsch
 XvvVhv83UytoCg7Eqg3Yz78DuQCOGAL27stRxxZ4KRKs5APH5YieiMLVtlkAtAtW
 BfaGQhkcx7kyZFE3EfHsWrEBHE9XRtkQ1DEFc88ZcNu51mBNHxGDUXmJEtVxdHli
 q2FUn7Ajy+YSFsHQcHCZytR/7tj4d6xjsi19RijMKCr4HZOkqbkruPAwv+vs6FWz
 Os68LWBLf3IljAlccdfuibQ6gHBgIUSL4uPROpp2hmJjP/sB9CJQWHaAqYuoxtEB
 inUcNNQcZMvP4oJLd2pO4dnV/Emvh3twlxi0+m/oKyt25ztBjZK0LIiYii6Ncx/J
 2ItkfhfbCzatr7h5YygHOHSDwolW3HYz0VuzFeo8bZuNnevTIPeh3FH2LMv70fmK
 SNssNYVVMhpD2k/xjmutrF3X3AE+Isvom7vCfTT1y4jMPFPc3E1qmKI9S415dTkh
 sWpVNNvre9g/8AuH0qFAEDXVpcmejvISUU1nlomj5SReAmS7ga0=
 =/Twf
 -----END PGP SIGNATURE-----

Merge tag 'gemini-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt

Gemini device tree updates for the v5.14 kernel:
- MAINTAINERS fix for the DTS files
- Drop a duplicate ethernet node on the RUT1xx DTS
- Add device_type to the PCI node
- Fix up some DTS syntax so it agrees with the schemas merged
  for the v5.14 merge window

* tag 'gemini-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: dts: gemini: remove xxx-cells from display
  ARM: dts: gemini-dlink-dir-685: Remove address from display port
  ARM: dts: gemini-dlink-dir-685: rename gpio-i2c to i2c
  ARM: dts: gemini-dlink-dns-313: rename gpio-i2c to i2c
  ARM: dts: gemini: convert obsolete SPI properties
  ARM: dts: gemini: use the right rtc compatible
  ARM: dts: gemini: add device_type on pci
  ARM: dts: gemini-rut1xx: remove duplicate ethernet node
  ARM: dts: gemini: rename mdio to the right name
  MAINTAINERS: gemini: add missing dts pattern

Link: https://lore.kernel.org/r/CACRpkdZWpLAcAStq8dEyGL_d9Bvp-WNPu-2EuJw1eTL4kyvgig@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:25:18 -07:00
Olof Johansson
3b0898f978 IXP4xx DTS updates for the v5.14 kernel:
- Add ethernet to the boards
 - Add PCI hosts to the boards
 - Create an expansion bus around the flash memory
 - Add the beeper to NSLU2 completing the NSLU2 DTS
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAmC2GpQACgkQQRCzN7AZ
 XXM+rBAAi4pY5gcmzy3tFdt0wNuJFs3Wn8zvaWRybFottIvfUw+lXOYiHBpa9O0m
 yToj+LwKbylgeAuG7rfjzVRq0snKKF5y00eq3MKPGxYTZYGQ71lw80v24k6hnxug
 yOKzabbViQihHPzddxZmPvjI8jFjZlx4ChHIe1rbzRxQgfR1uqaKICuaake7/jXr
 PEoP4uhfyIjBuOiCBBva3UPhSKuEZUJnzOGs0TbYoX8D3DryWQrCtWVg0ogWwdWM
 /SLjFpuHpsYt84d8wIkMPu8sVcrj0/jy796UISPhKYxMKMd8USzkAZcyxD3w/WNJ
 KjtQnp137smEoeqqLnHViEqMD7jv7GG0+ptfhMqRGKiV770yOKbXKvCj/EWQxIfX
 wjdLesSIa8douAk6jX09iSaVril+oxw9fNCsRJJX5k0382quGEvjZPfhs3qSuL8Q
 ltXB/y5hV9ropbvi2volRvx5PF54RNFCxJW68fAaV8FxNhOOUGDLWp3fQ7oDl2Iz
 EOEgqeu/Ue1wffrZ+tJWQDn6z04Yj7vs/76YzaRicc8JIr4o8rS+6f9feYLYSDgQ
 K8LZaKUhS7XHR4YMzWqNi0oIsT2T1JIWWtO16JYvk1pRIbIgVAaiztXPeZcGkHs4
 jIyIMIJ8FpnQYmMvbtT7jOVCVSdLenrHVKjfitgKI4uGqtRj2fg=
 =W/eR
 -----END PGP SIGNATURE-----

Merge tag 'ixp4xx-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/dt

IXP4xx DTS updates for the v5.14 kernel:
- Add ethernet to the boards
- Add PCI hosts to the boards
- Create an expansion bus around the flash memory
- Add the beeper to NSLU2 completing the NSLU2 DTS

* tag 'ixp4xx-dts-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
  ARM: dts: Fix up the IXP4xx ethernet nodes
  ARM: dts: ixp4xx: Add beeper to the NSLU2
  ARM: dts: ixp4xx: Create a proper expansion bus
  ARM: dts: ixp4xx: Add PCI hosts
  ARM: dts: ixp4xx: Add ethernet

Link: https://lore.kernel.org/r/CACRpkdbmRjGW7vpr7hG+jiRTqNMZAyKZNhtvzj=SqhZmb1+F6A@mail.gmail.com
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:24:51 -07:00
Olof Johansson
6d9b10fd95 Reset controller updates for v5.14
This tag adds support for the Microchip Sparx5 Switch Reset controller
 and contains some small fixes and cleanups in core and various drivers.
 -----BEGIN PGP SIGNATURE-----
 
 iI0EABYIADUWIQRRO6F6WdpH1R0vGibVhaclGDdiwAUCYJvZbRcccC56YWJlbEBw
 ZW5ndXRyb25peC5kZQAKCRDVhaclGDdiwLVVAP0Wr2d8eQ7BPHIau4ewshPnjqLC
 6hNy34HKbne5w6Ex9QEAnTmokTIibu++m8hs2BYMaouNcjck3CR8EuXKbyY8DQk=
 =5CsH
 -----END PGP SIGNATURE-----

Merge tag 'reset-for-v5.14' of git://git.pengutronix.de/pza/linux into arm/drivers

Reset controller updates for v5.14

This tag adds support for the Microchip Sparx5 Switch Reset controller
and contains some small fixes and cleanups in core and various drivers.

* tag 'reset-for-v5.14' of git://git.pengutronix.de/pza/linux:
  reset: brcmstb: Add missing MODULE_DEVICE_TABLE
  reset: a10sr: add missing of_match_table reference
  reset: RESET_INTEL_GW should depend on X86
  reset: RESET_BRCMSTB_RESCAL should depend on ARCH_BRCMSTB
  reset: uniphier: enclose UNIPHIER_RESET_ID_END value in parentheses
  reset: sti/syscfg: replace comma with semicolon
  reset: ti-syscon: fix to_ti_syscon_reset_data macro
  reset: berlin: replace unsigned with unsigned int
  reset: whitespace fixes
  reset: mchp: sparx5: add switch reset driver
  dt-bindings: reset: microchip sparx5 reset driver bindings
  reset: oxnas: replace file name with short description
  reset: zynqmp: replace spaces with tabs
  reset: bcm6345: Make reset_control_ops const

Link: https://lore.kernel.org/r/418cf3a460cfe1d0f91f87e10baaf478bd41f1d5.camel@pengutronix.de
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:23:39 -07:00
Corentin Labbe
9321a97c8c ARM: dts: add intel-ixp42x-welltech-epbx100
This patch adds devicetree for intel-ixp42x-welltech-epbx100.

Link: https://lore.kernel.org/r/20210504193457.4008384-6-clabbe@baylibre.com
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:22:02 -07:00
Corentin Labbe
b0a2fbd2a6 dt-bindings: arm: intel-ixp4xx: add welltech,epbx100
Adds welltech,epbx100 as a valid intel-ixp4xx board.

Link: https://lore.kernel.org/r/20210504193457.4008384-5-clabbe@baylibre.com
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:21:55 -07:00
Corentin Labbe
388b7e2239 dt-bindings: add vendor prefix for welltech
Add vendor prefix for Welltech computer Co Ld.

Link: https://lore.kernel.org/r/20210504193457.4008384-4-clabbe@baylibre.com
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:21:40 -07:00
Corentin Labbe
39f9610cca ARM: ixp4xx_defconfig: add MTD_PHYSMAP
Without MTD_PHYSMAP/MTD_PHYSMAP_OF the flash partitions of my welltech,epbx100
are not detected.

Link: https://lore.kernel.org/r/20210504193457.4008384-3-clabbe@baylibre.com
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:21:30 -07:00
Corentin Labbe
224bdcbc04 ARM: ixp4xx_defconfig: add CONFIG_SERIAL_OF_PLATFORM
My ixp42x-welltech-epbx100 does not print anything on console without
CONFIG_SERIAL_OF_PLATFORM.

Link: https://lore.kernel.org/r/20210504193457.4008384-2-clabbe@baylibre.com
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
2021-06-12 08:21:22 -07:00
Phillip Potter
edc64e7a03 staging: rtl8188eu: remove ODM_RT_TRACE calls from hal/phy.c
Remove all ODM_RT_TRACE calls from hal/phy.c, as this debug code
is not optimal and doesn't follow best practices. This in concert
with other removals allows for the removal of include/odm_debug.h
in its entirety.

Tested-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Martin Kaiser <martin@kaiser.cx>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210611002504.166405-2-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-12 15:38:52 +02:00
Greg Kroah-Hartman
922a0524f7 staging: drop kpc2000 driver
It seems that the old developer is no longer with the company producing
this device, and the company has no plans on getting this out of the
staging directory at all, so let's drop the driver for now as it's
pretty much abandonded.

If someone want to support this and get it out of staging, we can easily
revert this change and bring it back.

Cc: Matt Sickler <matt.sickler@msk4.com>
Link: https://lore.kernel.org/r/20210610183153.2397760-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-12 15:38:35 +02:00
Philippe Dixon
c57f4f002b staging: rtl8723bs: core: add blank line after variable declaration
This patch fixes the following checkpatch.pl warning:

WARNING: Missing a blank line after declarations

Signed-off-by: Philippe Dixon <philippesdixon@gmail.com>
Link: https://lore.kernel.org/r/c5eedc7a5298b05beb576b7b9e108794ca7bb58c.1623339773.git.philippesdixon@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-12 15:38:08 +02:00
Fabio M. De Francesco
eff810f82e staging: rtl8712: Replace printk() with netdev_dbg()
Replaced printk() with netdev_dbg() because the latter is preferred in
network devices drivers.

Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210609135659.4054-1-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-12 15:37:57 +02:00
Fabio M. De Francesco
22a9f1c459 staging: rtl8723bs: os_dep: Remove conditions with no effects
Removed conditions with no effects. Detected by Coccinelle.
Deleted a variable that is no longer used because of the above-mentioned
removals.

Reviewed-by: Fabio Aiuto <fabioaiuto83@gmail.com>
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20210609132346.15403-1-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-12 15:37:46 +02:00
Jiri Prchal
eab61fb1cc nvmem: eeprom: at25: fram discovery simplification
Changed "is_fram" to bool and set it based on compatible string.

Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz>
Link: https://lore.kernel.org/r/20210611152416.68386-1-jiri.prchal@aksignal.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-12 15:34:17 +02:00
Yang Yingliang
e0a6120f68 ath10k: remove unused more_frags variable
Fix the following W=1 build warning:

  drivers/net/wireless/ath/ath10k/htt_rx.c:1790:7: warning: variable ‘more_frags’ set but not used [-Wunused-but-set-variable]
   1790 |  bool more_frags;
        |       ^~~~~~~~~~

Fixes: a1166b2653 ("ath10k: add CCMP PN replay protection for fragmented frames for PCIe")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210526142219.2542528-1-yangyingliang@huawei.com
2021-06-12 13:38:26 +03:00
Randy Dunlap
272fdc0c45 wireless: carl9170: fix LEDS build errors & warnings
kernel test robot reports over 200 build errors and warnings
that are due to this Kconfig problem when CARL9170=m,
MAC80211=y, and LEDS_CLASS=m.

WARNING: unmet direct dependencies detected for MAC80211_LEDS
  Depends on [n]: NET [=y] && WIRELESS [=y] && MAC80211 [=y] && (LEDS_CLASS [=m]=y || LEDS_CLASS [=m]=MAC80211 [=y])
  Selected by [m]:
  - CARL9170_LEDS [=y] && NETDEVICES [=y] && WLAN [=y] && WLAN_VENDOR_ATH [=y] && CARL9170 [=m]

CARL9170_LEDS selects MAC80211_LEDS even though its kconfig
dependencies are not met. This happens because 'select' does not follow
any Kconfig dependency chains.

Fix this by making CARL9170_LEDS depend on MAC80211_LEDS, where
the latter supplies any needed dependencies on LEDS_CLASS.

Fixes: 1d7e1e6b1b ("carl9170: Makefile, Kconfig files and MAINTAINERS")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Christian Lamparter <chunkeey@googlemail.com>
Cc: linux-wireless@vger.kernel.org
Cc: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Christian Lamparter <chunkeey@googlemail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210530031134.23274-1-rdunlap@infradead.org
2021-06-12 13:37:46 +03:00
Yang Yingliang
e2783e2f39 ath10k: add missing error return code in ath10k_pci_probe()
When chip_id is not supported, the resources will be freed
on path err_unsupported, these resources will also be freed
when calling ath10k_pci_remove(), it will cause double free,
so return -ENODEV when it doesn't support the device with wrong
chip_id.

Fixes: c0c378f990 ("ath10k: remove target soc ps code")
Fixes: 7505f7c3ec ("ath10k: create a chip revision whitelist")
Fixes: f8914a1462 ("ath10k: restore QCA9880-AR1A (v1) detection")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210522105822.1091848-3-yangyingliang@huawei.com
2021-06-12 13:34:31 +03:00
Yang Yingliang
9e88dd431d ath10k: go to path err_unsupported when chip id is not supported
When chip id is not supported, it go to path err_unsupported
to print the error message.

Fixes: f8914a1462 ("ath10k: restore QCA9880-AR1A (v1) detection")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210522105822.1091848-2-yangyingliang@huawei.com
2021-06-12 13:34:31 +03:00
Baochen Qiang
5088df0504 ath11k: don't call ath11k_pci_set_l1ss for WCN6855
For QCA6390, one PCI related clock drifts sometimes, and it makes
PCI link difficult to quit L1ss. Current implementation fixed this
by configuring some related regs using ath11k_pci_fix_l1ss.

WCN6855 does not have this clock drift problem, so no need to set
these regs.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

Signed-off-by: Baochen Qiang <bqiang@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210511162214.29475-8-jouni@codeaurora.org
2021-06-12 13:31:05 +03:00
Baochen Qiang
0fbf195700 ath11k: add support for WCN6855
This patch is to add support for WCN6855. For station mode,
WCN6855 is able to connect to an AP, and ping works well.
For AP mode, hostapd is able to bringup an SAP interface with
WCN6855, a normal station can connect to this AP and
ping works well.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

Signed-off-by: Baochen Qiang <bqiang@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210511162214.29475-7-jouni@codeaurora.org
2021-06-12 13:31:05 +03:00
Baochen Qiang
8845fed1ad ath11k: add support to get peer id for WCN6855
For WCN6855, the layout of hal rx mpdu info is different, so need to
handle this target differently when getting peer id.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

Signed-off-by: Baochen Qiang <bqiang@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210511162214.29475-6-jouni@codeaurora.org
2021-06-12 13:31:04 +03:00
Baochen Qiang
ed66849e15 ath11k: setup WBM_IDLE_LINK ring once again
For WCN6855, WBM idle link ring needs a reinit.
Without this reinit, firmware crash might happen occasionally.
This is requested by the hw team.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

Signed-off-by: Baochen Qiang <bqiang@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210511162214.29475-5-jouni@codeaurora.org
2021-06-12 13:31:03 +03:00
Baochen Qiang
0d55b76fd8 ath11k: setup REO for WCN6855
WCN6855 needs a different reo configuration, so add separate handling
for this target in ath11k_hw_ops.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1
Tested-on: QCA6390 hw2.0 PCI WLAN.HST.1.0.1-01740-QCAHSTSWPLZ_V2_TO_X86-1

Signed-off-by: Baochen Qiang <bqiang@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210511162214.29475-4-jouni@codeaurora.org
2021-06-12 13:31:02 +03:00
Baochen Qiang
e4073430ee ath11k: add dp support for WCN6855
hal rx descriptor is different for WCN6855 and there are such a lot
of handlers processing this descriptor in data path. So add separate
handling for this target.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1

Signed-off-by: Baochen Qiang <bqiang@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210511162214.29475-3-jouni@codeaurora.org
2021-06-12 13:31:02 +03:00
Baochen Qiang
755b1f7317 ath11k: add hw reg support for WCN6855
Reg address of WCN6855 is different from other devices,
so add separate reg definition for this target.

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1

Signed-off-by: Govind Singh <govinds@codeaurora.org>
Signed-off-by: Baochen Qiang <bqiang@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210511162214.29475-2-jouni@codeaurora.org
2021-06-12 13:31:01 +03:00