VMware mks-guest-stats mechanism allows the collection of performance stats from
guest userland GL contexts, as well as from vmwgfx kernelspace, via a set of sw-
defined performance counters. The userspace performance counters are (de)registerd
with vmware-vmx-stats hypervisor via new iocts. The vmwgfx kernelspace counters
are controlled at build-time via a new config DRM_VMWGFX_MKSSTATS.
* Add vmw_mksstat_{add|remove|reset}_ioctl controlling the tracking of
mks-guest-stats in guest winsys contexts
* Add DRM_VMWGFX_MKSSTATS config to drivers/gpu/drm/vmwgfx/Kconfig controlling
the instrumentation of vmwgfx for kernelspace mks-guest-stats counters
* Instrument vmwgfx vmw_execbuf_ioctl to collect mks-guest-stats according to
DRM_VMWGFX_MKSSTATS
Signed-off-by: Martin Krastev <krastevm@vmware.com>
Reviewed-by: Zack Rusin <zackr@vmware.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609172307.131929-3-zackr@vmware.com
Make devcaps code self-contained so that it's easier to cache
and operate on them.
As the number of devcaps got bigger the code dealing with them
got more and more tricky. Lets create a central place to deal
with all the complexity. This lets us remove the lock we used
to require to deal with register write races because we only
read the devcaps at initialization.
Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609172307.131929-2-zackr@vmware.com
Dropping the machine_init specific of_platform_default_populate() can be
done safely due to the following two facts:
1)
Since commit 44a7185c2a ("of/platform: Add common method to populate
default bus") we have a common method to populate the devices.
2)
The machine_init code don't need bounded devices<>drivers since the code
uses syscon_regmap_lookup_by_compatible() which register a syscon
device on demand.
Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
This adds support for the power domains founds on i.MX8MN. The Nano
has fewer domains than the Mini, and the access to some of these domains
is different than that of the Mini, the Mini power domains cannot be
reused.
Signed-off-by: Adam Ford <aford173@gmail.com>
Acked-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i.MX8M Nano has a similar power domain controller to that of the
mini, but it isn't fully compatible, so it needs a separate binding
and power domain tables.
Add the bindings and tables.
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- Fix the length check in the temp buffer filter
- Fix build failure in bootconfig tools for "fallthrough" macro
- Fix error return of bootconfig apply_xbc() routine
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYMPDdBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qsBsAQDYTMYxQ4nonoxoyRv5+Zbt203IJAlJ
EDciljCGGzwY4QD/emiR5q3UMMJSzUC8jtuGWfwLPlZTIGq5vnvEPsqtXA0=
=t5W+
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.13-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix the length check in the temp buffer filter
- Fix build failure in bootconfig tools for "fallthrough" macro
- Fix error return of bootconfig apply_xbc() routine
* tag 'trace-v5.13-rc5-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Correct the length check which causes memory corruption
ftrace: Do not blindly read the ip address in ftrace_bug()
tools/bootconfig: Fix a build error accroding to undefined fallthrough
tools/bootconfig: Fix error return code in apply_xbc()
- Add bias support for the R-Car H2, V2H, E2, V3M, and V3H, and
RZ/G1C, RZ/G1H, and RZ/G1E SoCs.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYMMrdQAKCRCKwlD9ZEnx
cMWUAP9UDHAY7mHXlSKZ5FWbQk6fWvxD/EhZolDxr23z/FBHHwEAuEGKxrkSAKOm
h/W0HrGhQ/AmHPHLdj2lFWIQEZijXgE=
=wcIi
-----END PGP SIGNATURE-----
Merge tag 'renesas-pinctrl-for-v5.14-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel
pinctrl: renesas: Updates for v5.14 (take two)
- Add bias support for the R-Car H2, V2H, E2, V3M, and V3H, and
RZ/G1C, RZ/G1H, and RZ/G1E SoCs.
The reset-gpios property is added to the optional dt-bindings and
also an example for it's usage.
Signed-off-by: Andreas Kaessens <akaessens@gmail.com>
Signed-off-by: Darian Biastoch <d.biastoch@gmail.com>
Link: https://lore.kernel.org/r/20210610132438.3085841-2-akaessens@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The MCP23x port expander RESET# line can be connected to a host GPIO.
The optional reset-gpio must be set to LOW if the reset is asserted
at probing time.
On page 5 in the datasheet [0] the "Device Active After Reset high"
time is specified at 0 µs. Therefore no waiting is needed after the
reset transition.
[0] https://ww1.microchip.com/downloads/en/DeviceDoc/20001952C.pdf
Signed-off-by: Andreas Kaessens <akaessens@gmail.com>
Signed-off-by: Darian Biastoch <d.biastoch@gmail.com>
Link: https://lore.kernel.org/r/20210610132438.3085841-1-akaessens@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
- Handle changes to needed LTO flags in Clang 13 (Tor Vic)
-----BEGIN PGP SIGNATURE-----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=3Bs0
-----END PGP SIGNATURE-----
Merge tag 'clang-features-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull clang LTO fix from Kees Cook:
"Clang 13 fixed some IR behavior for LTO, but this broke work-arounds
used in the kernel.
Handle changes to needed LTO flags in Clang 13 (Tor Vic)"
* tag 'clang-features-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
x86, lto: Pass -stack-alignment only on LLD < 13.0.0
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: 668da745af ("tools: bpftool: add support for quotations ...")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20210609115916.2186872-1-chengzhihao1@huawei.com
There is no need for special treatment of the 'ret == 0' case.
This patch simplifies the return expression.
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210609115651.3392580-1-wanghai38@huawei.com
Add basic support to run QEMU via kunit_tool. Add support for i386,
x86_64, arm, arm64, and a bunch more.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Tested-by: David Gow <davidgow@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Document QEMU support, what it does, and how to use it in kunit_tool.
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Add a new kernel command-line option, 'kunit_shutdown', which allows the
user to specify that the kernel poweroff, halt, or reboot after
completing all KUnit tests; this is very handy for running KUnit tests
on UML or a VM so that the UML/VM process exits cleanly immediately
after running all tests without needing a special initramfs.
Signed-off-by: David Gow <davidgow@google.com>
Signed-off-by: Brendan Higgins <brendanhiggins@google.com>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Tested-By: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Daniel Latypov <dlatypov@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When one parameter of a parameterised test failed, its failure would be
propagated to the overall test, but not to the suite result (unless it
was the last parameter).
This is because test_case->success was being reset to the test->success
result after each parameter was used, so a failing test's result would
be overwritten by a non-failing result. The overall test result was
handled in a third variable, test_result, but this was discarded after
the status line was printed.
Instead, just propagate the result after each parameter run.
Signed-off-by: David Gow <davidgow@google.com>
Fixes: fadb08e7c7 ("kunit: Support for Parameterized Testing")
Reviewed-by: Marco Elver <elver@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The PCIe host bridge on RK3399 advertises a single 64-bit memory
address range even though it lies entirely below 4GB.
Previously the OF PCI range parser treated 64-bit ranges more
leniently (i.e., as 32-bit), but since commit 9d57e61bf7 ("of/pci:
Add IORESOURCE_MEM_64 to resource flags for 64-bit memory addresses")
the code takes a stricter view and treats the ranges as advertised in
the device tree (i.e, as 64-bit).
The change in behaviour causes failure when allocating bus addresses
to devices connected behind a PCI-to-PCI bridge that require
non-prefetchable memory ranges. The allocation failure was observed
for certain Samsung NVMe drives connected to RockPro64 boards.
Update the host bridge window attributes to treat it as 32-bit address
memory. This fixes the allocation failure observed since commit
9d57e61bf7.
Reported-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/7a1e2ebc-f7d8-8431-d844-41a9c36a8911@arm.com
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Punit Agrawal <punitagrawal@gmail.com>
Tested-by: Alexandru Elisei <alexandru.elisei@arm.com>
Link: https://lore.kernel.org/r/20210607112856.3499682-5-punitagrawal@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
To simplify the kernel address conversion code, make the same definition of
kernel_mapping_pa_to_va and kernel_mapping_va_to_pa compatible for both xip
and !xip kernel by defining XIP_OFFSET to 0 in !xip kernel.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Make the physical RAM base address available for all kernels, not only
XIP kernels as it will allow to simplify address conversions macros.
Signed-off-by: Alexandre Ghiti <alex@ghiti.fr>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Alex Elder says:
====================
net: ipa: introduce ipa_syfs.c
This series (its last patch, actually) creates a new source file,
"ipa_syfs.c", to contain functions and data that expose to user
space information known by the IPA driver via device attributes.
The directory containing these files on supported systems is:
/sys/devices/platform/soc@0/1e40000.ipa
And within that direcftory, the following files and directories
are added:
.
|-- feature
| |-- rx_offload Type of checksum offload supported
| `-- tx_offload
| . . .
|-- modem
| |-- rx_endpoint_id IPA endpoint IDs for the embedded modem
| `-- tx_endpoint_id
| . . .
|-- version IPA hardware version (informational)
. . .
The first patch just makes endpoint validation unconditional, as
suggested by Leon Romanovsky. The second just ensures the version
defined in configuration data is valid, so the version attribute
doesn't have to handle unrecognized version numbers.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add IPA device attributes to expose information known by the IPA
driver about the hardware and its configuration.
All pointers used to display these attribute values (i.e., IPA
pointer and endpoint pointers) will have been initialized by the
time IPA probe has completed, so they may be safely dereferenced.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Define and use a new function that just validates the version
defined in configuration data.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The cost of validating the endpoint configuration data is not all
that high, so just do it unconditionally, rather than doing so only
when IPA_VALIDATAION is defined.
Suggested-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/ethernet/ibm/ibmvnic.c: In function ‘handle_vpd_rsp’:
drivers/net/ethernet/ibm/ibmvnic.c:4393:3: warning: ‘strncpy’ output truncated before terminating nul copying 3 bytes from a string of the same length [-Wstringop-truncation]
4393 | strncpy((char *)adapter->fw_version, "N/A", 3 * sizeof(char));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean says:
====================
Port the SJA1105 DSA driver to XPCS
As requested when adding support for the NXP SJA1110, the SJA1105 driver
could make use of the common XPCS driver, to eliminate some hardware
specific code duplication.
This series modifies the XPCS driver so that it can accommodate the XPCS
instantiation from NXP switches, and the SJA1105 driver so it can expose
what the XPCS driver expects.
Tested on NXP SJA1105S and SJA1110A.
Changes in v3:
None. This is a resend of v2 which had "changes requested" even though
there was no direct feedback.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The MAC treats 2500base-x same as SGMII (yay for that) except that it
must be set to a different speed.
Extend all places that check for SGMII to also check for 2500base-x.
Also add the missing 2500base-x compatibility matrix entry for SJA1110D.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For the xMII Mode Parameters Table to be properly configured for SGMII
mode on SJA1110, we need to set the "special" bit, since SGMII is
officially bitwise coded as 0b0011 in SJA1105 (decimal 3, equal to
XMII_MODE_SGMII), and as 0b1011 in SJA1110 (decimal 11).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On the SJA1110, the PCS of each SERDES-capable port is accessed through
a different memory window which is 0x100 bytes in size, denoted by
"pcs_base".
In each PCS register access window, the XPCS MMDs are accessed in an
indirect way: in pages/banks of up to 0x100 addresses each. Changing the
page/bank is done by writing to a special register at the end of the
access window.
The MDIO register map accessed indirectly through the indirect banked
method described above is similar to what SJA1105 has: upper 5 bits are
the MMD, lower 16 bits are the MDIO address within that MMD.
Since the PHY ID reported by the XPCS inside SJA1110 is also all zeroes
(like SJA1105), we need to trap those reads and return a fake PHY ID so
that the xpcs driver can apply some specific fixups for our integration.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is a desire to use the generic driver for the Synopsys XPCS
located in drivers/net/pcs, and to achieve that, the sja1105 driver must
expose an MDIO bus for the SGMII PCS, because the XPCS probes as an
mdio_device.
In preparation of the SJA1110 which in fact has a different access
procedure for the SJA1105, we register this PCS MDIO bus once in the
common code, but we implement function pointers for the read and write
methods. In this patch there is a single implementation for them.
There is exactly one MDIO bus for the PCS, this will contain all PCSes
at MDIO addresses equal to the port number.
We delete a bunch of hardware support code because the xpcs driver
already does what we need.
We need to hack up the MDIO reads for the PHY ID, since our XPCS
instantiation returns zeroes and there are some specific fixups which
need to be applied by the xpcs driver.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The sja1105 hardware has a quirk in that some changes require a switch
reset, which loses all configuration. When the reset is initiated,
everything needs to be reprogrammed, including the MACs and the PCS.
This is currently done in sja1105_static_config_reload() - we manually
call sja1105_adjust_port_config(), sja1105_sgmii_pcs_config() and
sja1105_sgmii_pcs_force_speed() which are all internal functions.
There is a desire for sja1105 to use the common xpcs driver, and that
means that the equivalents of those functions, xpcs_do_config() and
xpcs_link_up() respectively, will no longer be local functions.
Forcing phylink to retrigger a resolve somehow, say by doing dev_close()
followed by dev_open() is not really an option, because the CPU port
might have a PCS as well, and there is no net device which we can close
and reopen for that. Additionally, the dev_close/dev_open sequence might
force a renegotiation of the copper-side link for SGMII ports connected
to a PHY, and this is undesirable as well, because the switch reset is
much quicker than a PHY autoneg, so we would have a lot more downtime.
The only solution I see is for the sja1105 driver to keep doing what
it's doing, and that means we need to export the equivalents from xpcs
for sja1105_sgmii_pcs_config and sja1105_sgmii_pcs_force_speed, and call
them directly in sja1105_static_config_reload(). This will be done
during the conversion patch.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The NXP SJA1110 switch integrates its own, non-Synopsys PMA, but it
manages it through the register space of the XPCS itself, in a small
register window inside MDIO_MMD_VEND2 from address 0x8030 to 0x806e.
This coincides with where the registers for the default Synopsys PMA
are, but the register definitions are of course not the same.
This situation is an odd hardware quirk, but the simplest way to manage
it is to drive the SJA1110's PMA from within the XPCS driver.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The NXP SJA1105 DSA switch integrates a Synopsys SGMII XPCS on port 4.
The generic code works fine, except there is an integration issue which
needs to be dealt with: in this switch, the XPCS is integrated with a
PMA that has the TX lane polarity inverted by default (PLUS is MINUS,
MINUS is PLUS).
To obtain normal non-inverted behavior, the TX lane polarity must be
inverted in the PCS, via the DIGITAL_CONTROL_2 register.
We introduce a pma_config() method in xpcs_compat which is called by the
phylink_pcs_config() implementation.
Also, the NXP SJA1105 returns all zeroes in the PHY ID registers 2 and 3.
We need to hack up an ad-hoc PHY ID (OUI is zero, device ID is 1) in
order for the XPCS driver to recognize it. This PHY ID is added to the
public include/linux/pcs/pcs-xpcs.h for that reason (for the sja1105
driver to be able to use it in a later patch).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
xpcs_get_id() searches multiple MMDs for a known PHY ID, starting with
MDIO_MMD_PCS (3). However not all integrators might have implemented
that MMD on their MDIO bus. For example, the NXP SJA1105 and SJA1110
switches only implement vendor-specific MMD 1 and 2.
When there is nothing on an MDIO bus at a certain address, traditionally
the bus returns 0xffff, which means that the bus remained in its default
pull-up state for the duration of the MDIO transaction. The 0xffff value
is widely used in drivers/net/phy/phy_device.c (see get_phy_c22_id for
example) to denote a missing device.
So it makes sense for the xpcs to ignore this value as well, and
continue its search, eventually finding the proper PHY ID in the
vendor-specific MMDs.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In fixed-link use cases, the XPCS can disable the clause 37 in-band
autoneg process, disable the "Automatic Speed Mode Change after CL37 AN"
setting, and force operation in a speed dictated by management.
Add support for this operating mode.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vendors which integrate the Designware XPCS might modify a few things
here and there, and to support those, it's best to create separate C
files in order to not clutter up the main pcs-xpcs.c.
Because the vendor files might want to access the common xpcs registers
too, let's move them in a header file which is local to this driver and
can be included by vendor files as appropriate.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no reason to embed an if within an if, we can just logically
AND the two conditions.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reorder the variable declarations in descending line length order,
according to the networking coding style.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Wong Vee Khee <vee.khee.wong@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The struct mdio_xpcs_args is reminiscent of when a similarly named
struct mdio_xpcs_ops existed. Now that that is removed, we can shorten
the name to dw_xpcs (dw for DesignWare).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SWIOTLB buffer is not needed unless the physical address space
is beyond the limit of dma, only initialize swiotlb when swiotlb_force
is true or not all system memory is DMA-able.
Also move the swiotlb_init() into mem_init().
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Alex Elder says:
====================
net: qualcomm: rmnet: MAPv4 download checksum cleanup, part 1
I'm posting a large series an two smaller parts; this is part 1.
The RMNet driver handles MAP (or QMAP) protocol traffic. There are
several versions of this protocol. Version 1 supports multiplexing,
as well as aggregation of packets in a single buffer. Version 4
adds the ability to perform checksum offload. And version 5
implements checksum offload in a different way from version 4.
This series involves only MAPv4 protocol checksum offload, and only
in the download (RX) direction. It affects handling of checksums
computed by hardware for UDP datagrams and TCP segments, carried
over both IPv4 and IPv6.
MAP packets arriving on an RMNet port implementing MAPv4 checksum
offload are passed to rmnet_map_checksum_downlink_packet() for
handling.
The packet is then passed to rmnet_map_ipv4_dl_csum_trailer() or
rmnet_map_ipv6_dl_csum_trailer(), depending contents of the MAP
payload. These two functions interpret checksum metadata to
determine whether the checksum in the received packet matches that
calculated by the hardware.
It is these two functions that are the subject of this series (parts
1 and 2). The bulk of these functions are transformed--in a lot of
small steps--from an extremely difficult-to-follow block of checksum
processing code into a fairly simple, heavily commented equivalent.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In the previous patch IPv4 download checksum offload code was
updated to avoid unnecessary byte swapping, based on properties of
the Internet checksum algorithm. This patch makes comparable
changes to the IPv6 download checksum offload handling.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Internet checksums are used for IPv4 header checksum, as well as TCP
segment and UDP datagram checksums. Such a checksum represents the
negated sum of adjacent pairs of bytes, using ones' complement
arithmetic.
One property of the Internet checkum is byte order independence [1].
Specifically, the sum of byte-swapped pairs is equal to the result
of byte swapping the sum of those same pairs when not byte-swapped.
So for example if a, b, c, d, y, and z are hexadecimal digits, and
PLUS represents ones' complement addition:
If: ab PLUS cd = yz
Then: ba PLUS dc = zy
For this reason, there is no need to swap the order of bytes in the
checksum value held in a message header, nor the one in the QMAPv4
trailer, in order to operate on them.
In other words, we can determine whether the hardware-computed
checksum matches the one in the message header without any byte
swaps.
(This patch leaves in place all existing type casts.)
[1] https://tools.ietf.org/html/rfc1071
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In rmnet_map_ipv6_dl_csum_trailer() there is an especially involved
line of code that determines the ones' complement sum of the IPv6
packet header (in host byte order). Simplify that by storing the
result of computing just the header checksum in a local variable,
then using that in the original assignment.
Use the size of the IPv6 header structure as the number of bytes to
checksum, rather than computing the offset to the transport header.
And use ip_fast_csum() rather than ipa_compute_csum(), knowing that
the size of an IPv6 header (40 bytes) is a multiple of 4 bytes
greater than 16.
Add some comments to match rmnet_map_ipv4_dl_csum_trailer().
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In rmnet_map_ipv4_dl_csum_trailer(), an illegal checksum subtraction
is done, subtracting hdr_csum (in host byte order) from csum_value (in
network byte order). Despite being illegal, it generally works,
because it turns out the value subtracted is (or should be) always 0,
which has the same representation in either byte order.
Doing illegal operations is not good form though, so fix this by
verifying the IP header checksum early in that function. If its
checksum is non-zero, the packet will be bad, so just return an
error. This will cause the packet to passed to the IP layer where
it can be dropped.
Thereafter, there is no need subtract the IP header checksum from
the checksum value in the trailer because we know it is zero.
Add a comment explaining this.
This type of packet error is different from other types, so add a
new statistics counter to track this condition.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The checksum fields of the TCP and UDP header structures already
have type __sum16. We don't support any other protocol headers, so
we can simplify rmnet_map_get_csum_field(), getting rid of the local
variable entirely and just returning the appropriate address.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The value passed as an argument to rmnet_map_ipv4_ul_csum_header()
is always an IPv4 header. Rather than using a local variable, just
have the type of the argument reflect the proper type.
In rmnet_map_ipv6_ul_csum_header() things are defined a little
differently, but make the same basic change there.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If IPV6 is not enabled in the kernel configuration, the RMNet
checksum code indicates a buffer containing an IPv6 packet is not
supported. The same thing happens if a buffer contains something
other than an IPv4 or IPv6 packet.
We can rearrange things a bit in two functions so that some #ifdef
calls can simply be eliminated.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In rmnet_map_ipv4_dl_csum_trailer() use ip_is_fragment() to
determine whether a socket buffer contains a packet fragment.
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tony Nguyen says:
====================
Jake Keller says:
====================
100GbE Intel Wired LAN Driver Updates 2021-06-11
Extend the ice driver to support basic PTP clock functionality for E810
devices.
This includes some tangential work required to setup the sideband queue and
driver shared parameters as well.
This series only supports E810-based devices. This is because other devices
based on the E822 MAC use a different and more complex PHY.
The low level device functionality is kept within ice_ptp_hw.c and is
designed to be extensible for supporting E822 devices in a future series.
This series also only supports very basic functionality including the
ptp_clock device and timestamping. Support for configuring periodic outputs
and external input timestamps will be implemented in a future series.
There are a couple of potential "what? why?" bits in this series I want to
point out:
1) the PTP hardware functionality is shared between multiple functions. This
means that the same clock registers are shared across multiple PFs. In order
to avoid contention or clashing between PFs, firmware assigns "ownership" to
one PF, while other PFs are merely "associated" with the timer. Because we
share the hardware resource, only the clock owner will allocate and register
a PTP clock device. Other PFs determine the appropriate PTP clock index to
report by using a firmware interface to read a shared parameter that is set
by the owning PF.
2) the ice driver uses its own kthread instead of using do_aux_work. This is
because the periodic and asynchronous tasks are necessary for all PFs, but
only one PF will allocate the clock.
The series is broken up into functional pieces to allow easy review.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>