No reason to make the callers of intel_crtc_get_pipe_config()
populate hw.active. Let's do it in intel_crtc_get_pipe_config()
itself. hw.enable we leave up to the callers since it's slightly
different for readout vs. state check.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201112191718.16683-4-ville.syrjala@linux.intel.com
Create a new function intel_crtc_get_pipe_config()
that calls platform specific hooks for get_pipe_config()
No functional change here.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
[vsyrjala: Conform to modern i915 coding style, fix patch subject]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201112191718.16683-3-ville.syrjala@linux.intel.com
No functional changes, create a separate intel_encoder_get_config()
function that calls encoder->get_config hook.
This is needed so that later we can add beigjoienr related
readout here.
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
[vsyrjala: Move the code around for the future]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201112191718.16683-2-ville.syrjala@linux.intel.com
No functional changes. This patch just moves some mode checks
around to prepare for adding bigjoiner related mode validation
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201112023954.12301-1-manasi.d.navare@intel.com
Just following what we do in many other places, DG1 is a exception so
move it to the top instead of add it inside of INTEL_GEN(dev_priv) >= 12.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201111162408.98002-2-jose.souza@intel.com
DC9 has a separate HW flow from the rest of the DC states and it is
available in GEN9 LP platforms and on GEN11 and newer, so here
moving the assignment of the mask to a single conditional block to
simplifly code.
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201111162408.98002-1-jose.souza@intel.com
Now that hpd/display related calls are split from the rest in
intel_irq_init(), skip all of that in case we don't have display.
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106225531.920641-8-lucas.demarchi@intel.com
!HAS_DISPLAY() implies !HAS_OVERLAY(), skipping overlay setup anyway, so
return earlier from intel_modeset_init() for clarity.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106225531.920641-4-lucas.demarchi@intel.com
Display is always disabled and enabled when resetting any engine, but if
there is no display it should not do anything with display and only
reset the needed engines.
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106225531.920641-3-lucas.demarchi@intel.com
Reduce this maintenance nightmare a bit by converting the plane
min/max width/height stuff into vfuncs.
Now, if I could just think of a nice way to also use this for
intel_mode_valid_max_plane_size()...
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200924185113.30849-1-ville.syrjala@linux.intel.com
Reviewed-by: Aditya Swarup <aditya.swarup@intel.com>
JSL has update in vswing table for eDP.
BSpec: 21257
Changes since V1:
- Fixed few checkpatch errors
Cc: Souza Jose <jose.souza@intel.com>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201020053657.99890-1-tejaskumarx.surendrakumar.upadhyay@intel.com
DG1 uses 2 registers for the ddi clock mapping, with PHY A and B using
DPCLKA_CFGCR0 and PHY C and D using DPCLKA1_CFGCR0. Hide this behind a
single macro that chooses the correct register according to the phy
being accessed, use the correct bitfields for each pll/phy and implement
separate functions for DG1 since it doesn't share much with ICL/TGL
anymore.
The previous values were correct for PHY A and B since they were using
the same register as before and the bitfields were matching.
v2: Add comment and try to simplify DG1_DPCLKA* macros by reusing
previous ones
v3:
- Fix DG1_DPCLKA_CFGCR0_DDI_CLK_SEL_MASK() after wrong macro reuse
- Move phy -> id map to a separate macro (Aditya)
- Remove DG1_DPCLKA_CFGCR0_DDI_CLK_SEL_MASK where not required
(Aditya)
- Use drm_WARN_ON
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Clinton Taylor <Clinton.A.Taylor@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Aditya Swarup <aditya.swarup@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Aditya Swarup <aditya.swarup@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106210006.837953-1-lucas.demarchi@intel.com
As per W/A implemented for TGL to program half of the nominal
DCO divider fraction value which is also applicable on EHL.
Changes since V2:
- Apply stepping B0 till FOREVER
- B0 - revid update as per Bspec 29153
Changes since V1:
- ehl_ used as to keep earliest platform prefix
- WA required B0 stepping onwards
Cc: Deak Imre <imre.deak@intel.com>
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201104050655.171185-1-tejaskumarx.surendrakumar.upadhyay@intel.com
Replace the previous approach to force compute the initial PSR state
after i915 take over from firmware by the better and recently added
initial_fastset_check() hook.
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201102221048.104294-1-jose.souza@intel.com
Fix a typo that led to some MST short pulse event handling issue (the
short pulse event was handled for both encoder instances, each having
its own state).
Fixes: 1d8ca00245 ("drm/i915: Add PORT_TCn aliases to enum port")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201104010000.4165574-1-imre.deak@intel.com
If the VBT assigned tc->legacy_port mismatches the live_status indicator
for the connector, we ignore the VBT directive and switch over to the HW
setting. This is not a driver error, unless we happen to misparse the
VBT or the live_status registers. However, for the system in CI where
the error is only reported on 1 port out of 4, the evidence indicates
the VBT is wrong. Stop flaging this as an error since the cause is
beyond our control, fixup the mistake and continue on.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Reviewed-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201030153209.14808-1-chris@chris-wilson.co.uk
ibx_irq_pre_postinstall() looks totally pointless. We can just
init both SDEIMR and SDEIER at the same time before enabling the
master interrupt. It's equally racy as the other order due
to doing all of this from the postinstall stage with the interrupt
handler already in place. That is, safe with MSI but racy with
shared legacy interrupts. Fortunately we should have MSI on all ilk+.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-20-ville.syrjala@linux.intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Let's enable the hardware hpd logic only for the ports we
can actually use.
In theory this may save some miniscule amounts of power,
and more importantly it eliminates a lot if platform specific
codepaths since the generic thing can now deal with any
combination of ports being present on each SKU.
v2: Deal with DG1
v3: Deal with DG1 some more
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-18-ville.syrjala@linux.intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
We no longer unmask all HPD irqs, so we can drop the ugly per-platform
HPD IIR masking. IMR will prevent unsupported bits from appearing in
IIR.
v2: Deal with DG1
Include "HOTPLUG" in the mask names (Lucas)
v3: Fix typos in subject
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-17-ville.syrjala@linux.intel.com
No reason that I can see why we should enable the hpd detection logic
already during irq postinstall phase. We don't even do this on all
the platforms. We just need it before we actually enable the hotplug
interrupts in .hpd_irq_setup(), and in fact we already do it there as
well. Let's just eliminate the redundant early setup.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-15-ville.syrjala@linux.intel.com
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Use hpd_pin to parametrize BXT_DE_PORT_HP_DDI() to make it clear
these have nothing to do with DDI ports or PHYs as such. The only
thing that matters is the HPD pin assignment.
v2: Remember the gvt
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-8-ville.syrjala@linux.intel.com
Let's make the AUX CH names match the spec (AUX A-F for pre-tgl,
AUX A-C or AUX USBC1-6 for tgl+). And while at it let's include
the full encoder name in the AUX CH name as well (as opposed to
just using port_name() which wouldn't give us the right thing on
tgl+).
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-6-ville.syrjala@linux.intel.com
Let's pimp the DDI encoder->name to reflect what the spec calls them.
Ie. on pre-tgl DDI A-F, on tgl+ DDI A-C or DDI TC1-6.
Also since each encoder is really a combination of the DDI and the PHY
we include the PHY name as well.
ICL is a bit special since it already has the two different types
of DDIs (combo or TC) but it still calls them just DDI A-F regarless
of the type. For that let's add an extra "(TC)" note to remind
is which type of DDI it really is.
The code is darn ugly, but not sure there's much we can do about it.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028213323.5423-4-ville.syrjala@linux.intel.com
drm-misc-fixes next.
Some reset fixes for the mantix panel, some fixes for a scaler issue on
sun4i, many kernel-doc fixes and various fixes for vc4 (mostly HDMI audio
related)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCX5r8+gAKCRDj7w1vZxhR
xb0tAP92TkizJ/MBBnMTPRkVPnovK8TIy6m6LWmTrLllUSocWwEAqhWKFngB4Q2X
Fpnen5lcjuXstZJOC403SM/ZS1gCfgs=
=j6zS
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2020-10-29' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
First round of drm-misc-fixes with a couple of leftovers from
drm-misc-fixes next.
Some reset fixes for the mantix panel, some fixes for a scaler issue on
sun4i, many kernel-doc fixes and various fixes for vc4 (mostly HDMI audio
related)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201029173414.fxrl5jacsdwqheto@gilmour.lan
While I thought I had this correct (since it actually did reject modes
like I expected during testing), Ville Syrjala from Intel pointed out
that the logic here isn't correct. max_clock refers to the max data rate
supported by the DP encoder. So, limiting it to the output of ds_clock (which
refers to the maximum dotclock of the downstream DP device) doesn't make any
sense. Additionally, since we're using the connector's bpc as the canonical BPC
we should use this in mode_valid until we support dynamically setting the bpp
based on bandwidth constraints.
https://lists.freedesktop.org/archives/dri-devel/2020-September/280276.html
For more info.
So, let's rewrite this using Ville's advice.
v2:
* Ville pointed out I mixed up the dotclock and the link rate. So fix that...
* ...and also rename all the variables in this function to be more appropriately
labeled so I stop mixing them up.
* Reuse the bpp from the connector for now until we have dynamic bpp selection.
* Use use DIV_ROUND_UP for calculating the mode rate like i915 does, which we
should also have been doing from the start
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: 409d38139b ("drm/nouveau/kms/nv50-: Use downstream DP clock limits for mode validation")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lyude Paul <lyude@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ville also pointed out that I got a lot of the logic here wrong as well, whoops.
While I don't think anyone's likely using 3D output with nouveau, the next patch
will make nouveau_conn_mode_valid() make a lot less sense. So, let's just get
rid of it and open-code it like before, while taking care to move the 3D frame
packing calculations on the dot clock into the right place.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Fixes: d6a9efece7 ("drm/nouveau/kms/nv50-: Share DP SST mode_valid() handling with MST")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
With this we try to detect if the endianess switch works and assume LE if
not. Suggested by Ben.
Fixes: 51c05340e4 ("drm/nouveau/device: detect if changing endianness failed")
Signed-off-by: Karol Herbst <kherbst@redhat.com>
Cc: <stable@vger.kernel.org> # v5.8+
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>