* uninline simple_strntoull(),
gcc overinlines and this function is not performance critical
* reorder arguments, so that appending INT_MAX as 4th argument
generates very efficient tail call
Space savings:
add/remove: 1/0 grow/shrink: 0/3 up/down: 27/-179 (-152)
Function old new delta
simple_strntoll - 27 +27
simple_strtoull 15 10 -5
simple_strtoll 41 7 -34
vsscanf 1930 1790 -140
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/all/82a2af6e-9b6c-4a09-89d7-ca90cc1cdad1@p183/
In the following two functions, len has already been assigned a value of
0 when defining the variable, so remove 'len=0;'.
Signed-off-by: Li kunyu <kunyu@nfschina.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20231023062359.130633-1-kunyu@nfschina.com
pr_flush() does not guarantee that all messages would really get flushed
to the console. The best it could do is to wait with a given timeout.[*]
The current interval 100ms for checking the progress might seem too
long in some situations. For example, such delays are not appreciated
during suspend and resume especially when the consoles have been flushed
"long" time before the check.
On the other hand, the sleeping wait might be useful in other situations.
Especially, it would allow flushing the messages using printk kthreads
on the same CPU[*].
Use msleep(1) as a compromise.
Also measure the time using jiffies. msleep() does not guarantee
precise wakeup after the given delay. It might be much longer,
especially for times < 20s. See Documentation/timers/timers-howto.rst
for more details.
Note that msecs_to_jiffies() already translates a negative value into
an infinite timeout.
[*] console_unlock() does not guarantee flushing the consoles since
the commit dbdda842fe ("printk: Add console owner and waiter
logic to load balance console writes").
It would be possible to guarantee it another way. For example,
the spinning might be enabled only when the console_lock has been
taken via console_trylock().
But the load balancing is helpful. And more importantly, the flush
with a timeout has been added as a preparation step for introducing
printk kthreads.
Signed-off-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20231006082151.6969-3-pmladek@suse.com
Commit 9e70a5e109 ("printk: Add per-console suspended state")
removed console lock usage during resume and replaced it with
the clearly defined console_list_lock and srcu mechanisms.
However, the console lock usage had an important side-effect
of flushing the consoles. After its removal, consoles were no
longer flushed before checking their progress.
Add the console_lock/console_unlock dance to the beginning
of __pr_flush() to actually flush the consoles before checking
their progress. Also add comments to clarify this additional
usage of the console lock.
Note that console_unlock() does not guarantee flushing all messages
since the commit dbdda842fe ("printk: Add console owner and waiter
logic to load balance console writes").
Reported-by: Todd Brandt <todd.e.brandt@intel.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217955
Fixes: 9e70a5e109 ("printk: Add per-console suspended state")
Co-developed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20231006082151.6969-2-pmladek@suse.com
When CONFIG_PRINTK is not set, PRINTK_MESSAGE_MAX is 0. This
leads to a zero-sized array @outbuf in @printk_shared_pbufs. In
console_flush_all() a pointer to the first element of the array
is assigned with:
char *outbuf = &printk_shared_pbufs.outbuf[0];
For !CONFIG_PRINTK this leads to a compiler warning:
warning: array subscript 0 is outside array bounds of
'char[0]' [-Warray-bounds]
This is not really dangerous because printk_get_next_message()
always returns false for !CONFIG_PRINTK, which leads to @outbuf
never being used. However, it makes no sense to even compile
these functions for !CONFIG_PRINTK.
Extend the existing '#ifdef CONFIG_PRINTK' block to contain
the formatting and emitting functions since these have no
purpose in !CONFIG_PRINTK. This also allows removing several
more !CONFIG_PRINTK dummies as well as moving
@suppress_panic_printk into a CONFIG_PRINTK block.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202309201724.M9BMAQIh-lkp@intel.com/
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230920155238.670439-1-john.ogness@linutronix.de
For the write_atomic callback, the console driver may have unsafe
regions that need to be appropriately marked. Provide functions
that accept the nbcon_write_context struct to allow for the driver
to enter and exit unsafe regions.
Also provide a function for drivers to check if they are still the
owner of the console.
Co-developed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Thomas Gleixner (Intel) <tglx@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230916192007.608398-9-john.ogness@linutronix.de
Implement an emit function for nbcon consoles to output printk
messages. It utilizes the lockless printk_get_next_message() and
console_prepend_dropped() functions to retrieve/build the output
message. The emit function includes the required safety points to
check for handover/takeover and calls a new write_atomic callback
of the console driver to output the message. It also includes
proper handling for updating the nbcon console sequence number.
A new nbcon_write_context struct is introduced. This is provided
to the write_atomic callback and includes only the information
necessary for performing atomic writes.
Co-developed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Thomas Gleixner (Intel) <tglx@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230916192007.608398-8-john.ogness@linutronix.de
Add an atomic_long_t field @nbcon_seq to the console struct to
store the sequence number for nbcon consoles. For nbcon consoles
this will be used instead of the non-atomic @seq field. The new
field allows for safe atomic sequence number updates without
requiring any locking.
On 64bit systems the new field stores the full sequence number.
On 32bit systems the new field stores the lower 32 bits of the
sequence number, which are expanded to 64bit as needed by
folding the values based on the sequence numbers available in
the ringbuffer.
For 32bit systems, having a 32bit representation in the console
is sufficient. If a console ever gets more than 2^31 records
behind the ringbuffer then this is the least of the problems.
Co-developed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Thomas Gleixner (Intel) <tglx@linutronix.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230916192007.608398-7-john.ogness@linutronix.de
Provide functions that are related to the safe handover mechanism
and allow console drivers to dynamically specify unsafe regions:
- nbcon_context_can_proceed()
Invoked by a console owner to check whether a handover request
is pending or whether the console has been taken over by another
context. If a handover request is pending, this function will
also perform the handover, thus cancelling its own ownership.
- nbcon_context_enter_unsafe()/nbcon_context_exit_unsafe()
Invoked by a console owner to denote that the driver is about
to enter or leave a critical region where a take over is unsafe.
The exit variant is the point where the current owner releases
the lock for a higher priority context which asked for the
friendly handover.
The unsafe state is stored in the console state and allows a
new context to make informed decisions whether to attempt a
takeover of such a console. The unsafe state is also available
to the driver so that it can make informed decisions about the
required actions and possibly take a special emergency path.
Co-developed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Thomas Gleixner (Intel) <tglx@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230916192007.608398-6-john.ogness@linutronix.de
In case of hostile takeovers it must be ensured that the previous
owner cannot scribble over the output buffer of the emergency/panic
context. This is achieved by:
- Adding a global output buffer instance for the panic context.
This is the only situation where hostile takeovers can occur and
there is always at most 1 panic context.
- Allocating an output buffer per non-boot console upon console
registration. This buffer is used by the console owner when not
in panic context. (For boot consoles, the existing shared global
legacy output buffer is used instead. Boot console printing will
be synchronized with legacy console printing.)
- Choosing the appropriate buffer is handled in the acquire/release
functions.
Co-developed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Thomas Gleixner (Intel) <tglx@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230916192007.608398-5-john.ogness@linutronix.de
The nbcon boot consoles also need printk buffers that are available
very early. Since the nbcon boot consoles will also be serialized
by the console_lock, they can use the same static printk buffers
that the legacy consoles are using.
Make the legacy static printk buffers available outside of printk.c
so they can be used by nbcon.c.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230916192007.608398-4-john.ogness@linutronix.de
Add per console acquire/release functionality.
The state of the console is maintained in the "nbcon_state" atomic
variable.
The console is locked when:
- The 'prio' field contains the priority of the context that owns the
console. Only higher priority contexts are allowed to take over the
lock. A value of 0 (NBCON_PRIO_NONE) means the console is not locked.
- The 'cpu' field denotes on which CPU the console is locked. It is used
to prevent busy waiting on the same CPU. Also it informs the lock owner
that it has lost the lock in a more complex scenario when the lock was
taken over by a higher priority context, released, and taken on another
CPU with the same priority as the interrupted owner.
The acquire mechanism uses a few more fields:
- The 'req_prio' field is used by the handover approach to make the
current owner aware that there is a context with a higher priority
waiting for the friendly handover.
- The 'unsafe' field allows to take over the console in a safe way in the
middle of emitting a message. The field is set only when accessing some
shared resources or when the console device is manipulated. It can be
cleared, for example, after emitting one character when the console
device is in a consistent state.
- The 'unsafe_takeover' field is set when a hostile takeover took the
console in an unsafe state. The console will stay in the unsafe state
until re-initialized.
The acquire mechanism uses three approaches:
1) Direct acquire when the console is not owned or is owned by a lower
priority context and is in a safe state.
2) Friendly handover mechanism uses a request/grant handshake. It is used
when the current owner has lower priority and the console is in an
unsafe state.
The requesting context:
a) Sets its priority into the 'req_prio' field.
b) Waits (with a timeout) for the owning context to unlock the
console.
c) Takes the lock and clears the 'req_prio' field.
The owning context:
a) Observes the 'req_prio' field set on exit from the unsafe
console state.
b) Gives up console ownership by clearing the 'prio' field.
3) Unsafe hostile takeover allows to take over the lock even when the
console is an unsafe state. It is used only in panic() by the final
attempt to flush consoles in a try and hope mode.
Note that separate record buffers are used in panic(). As a result,
the messages can be read and formatted without any risk even after
using the hostile takeover in unsafe state.
The release function simply clears the 'prio' field.
All operations on @console::nbcon_state are atomic cmpxchg based to
handle concurrency.
The acquire/release functions implement only minimal policies:
- Preference for higher priority contexts.
- Protection of the panic CPU.
All other policy decisions must be made at the call sites:
- What is marked as an unsafe section.
- Whether to spin-wait if there is already an owner and the console is
in an unsafe state.
- Whether to attempt an unsafe hostile takeover.
The design allows to implement the well known:
acquire()
output_one_printk_record()
release()
The output of one printk record might be interrupted with a higher priority
context. The new owner is supposed to reprint the entire interrupted record
from scratch.
Co-developed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Thomas Gleixner (Intel) <tglx@linutronix.de>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230916192007.608398-3-john.ogness@linutronix.de
The current console/printk subsystem is protected by a Big Kernel Lock,
(aka console_lock) which has ill defined semantics and is more or less
stateless. This puts severe limitations on the console subsystem and
makes forced takeover and output in emergency and panic situations a
fragile endeavour that is based on try and pray.
The goal of non-BKL (nbcon) consoles is to break out of the console lock
jail and to provide a new infrastructure that avoids the pitfalls and
also allows console drivers to be gradually converted over.
The proposed infrastructure aims for the following properties:
- Per console locking instead of global locking
- Per console state that allows to make informed decisions
- Stateful handover and takeover
As a first step, state is added to struct console. The per console state
is an atomic_t using a 32bit bit field.
Reserve state bits, which will be populated later in the series. Wire
it up into the console register/unregister functionality.
It was decided to use a bitfield because using a plain u32 with
mask/shift operations resulted in uncomprehensible code.
Co-developed-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Signed-off-by: Thomas Gleixner (Intel) <tglx@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230916192007.608398-2-john.ogness@linutronix.de
-----BEGIN PGP SIGNATURE-----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=bhor
-----END PGP SIGNATURE-----
Merge tag 'printk-for-6.6-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk fix from Petr Mladek:
- Revert exporting symbols needed for dumping the raw printk buffer in
panic().
I pushed the export prematurely before the user was ready for merging
into the mainline.
* tag 'printk-for-6.6-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
Revert "printk: export symbols for debug modules"
-----BEGIN PGP SIGNATURE-----
iIYEABYIAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCZPi3lxAcbWljQGRpZ2lr
b2QubmV0AAoJEOXj0OiMgvbSW+4A/3VcBRAB8/1HTTUulwUMYhF2msyAN6p5TtKl
WGVASdC1AP9NbR2Dh9HwHZmVrlwRbVlqSh9Avi+d0VNQjJKPwvtHBw==
=nU3g
-----END PGP SIGNATURE-----
Merge tag 'landlock-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux
Pull landlock updates from Mickaël Salaün:
"One test fix and a __counted_by annotation"
* tag 'landlock-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
selftests/landlock: Fix a resource leak
landlock: Annotate struct landlock_rule with __counted_by
Current release - regressions:
- eth: stmmac: fix failure to probe without MAC interface specified
Current release - new code bugs:
- docs: netlink: fix missing classic_netlink doc reference
Previous releases - regressions:
- deal with integer overflows in kmalloc_reserve()
- use sk_forward_alloc_get() in sk_get_meminfo()
- bpf_sk_storage: fix the missing uncharge in sk_omem_alloc
- fib: avoid warn splat in flow dissector after packet mangling
- skb_segment: call zero copy functions before using skbuff frags
- eth: sfc: check for zero length in EF10 RX prefix
Previous releases - always broken:
- af_unix: fix msg_controllen test in scm_pidfd_recv() for
MSG_CMSG_COMPAT
- xsk: fix xsk_build_skb() dereferencing possible ERR_PTR()
- netfilter:
- nft_exthdr: fix non-linear header modification
- xt_u32, xt_sctp: validate user space input
- nftables: exthdr: fix 4-byte stack OOB write
- nfnetlink_osf: avoid OOB read
- one more fix for the garbage collection work from last release
- igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU
- bpf, sockmap: fix preempt_rt splat when using raw_spin_lock_t
- handshake: fix null-deref in handshake_nl_done_doit()
- ip: ignore dst hint for multipath routes to ensure packets
are hashed across the nexthops
- phy: micrel:
- correct bit assignments for cable test errata
- disable EEE according to the KSZ9477 errata
Misc:
- docs/bpf: document compile-once-run-everywhere (CO-RE) relocations
- Revert "net: macsec: preserve ingress frame ordering", it appears
to have been developed against an older kernel, problem doesn't
exist upstream
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=YpmE
-----END PGP SIGNATURE-----
Merge tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking updates from Jakub Kicinski:
"Including fixes from netfilter and bpf.
Current release - regressions:
- eth: stmmac: fix failure to probe without MAC interface specified
Current release - new code bugs:
- docs: netlink: fix missing classic_netlink doc reference
Previous releases - regressions:
- deal with integer overflows in kmalloc_reserve()
- use sk_forward_alloc_get() in sk_get_meminfo()
- bpf_sk_storage: fix the missing uncharge in sk_omem_alloc
- fib: avoid warn splat in flow dissector after packet mangling
- skb_segment: call zero copy functions before using skbuff frags
- eth: sfc: check for zero length in EF10 RX prefix
Previous releases - always broken:
- af_unix: fix msg_controllen test in scm_pidfd_recv() for
MSG_CMSG_COMPAT
- xsk: fix xsk_build_skb() dereferencing possible ERR_PTR()
- netfilter:
- nft_exthdr: fix non-linear header modification
- xt_u32, xt_sctp: validate user space input
- nftables: exthdr: fix 4-byte stack OOB write
- nfnetlink_osf: avoid OOB read
- one more fix for the garbage collection work from last release
- igmp: limit igmpv3_newpack() packet size to IP_MAX_MTU
- bpf, sockmap: fix preempt_rt splat when using raw_spin_lock_t
- handshake: fix null-deref in handshake_nl_done_doit()
- ip: ignore dst hint for multipath routes to ensure packets are
hashed across the nexthops
- phy: micrel:
- correct bit assignments for cable test errata
- disable EEE according to the KSZ9477 errata
Misc:
- docs/bpf: document compile-once-run-everywhere (CO-RE) relocations
- Revert "net: macsec: preserve ingress frame ordering", it appears
to have been developed against an older kernel, problem doesn't
exist upstream"
* tag 'net-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (95 commits)
net: enetc: distinguish error from valid pointers in enetc_fixup_clear_rss_rfs()
Revert "net: team: do not use dynamic lockdep key"
net: hns3: remove GSO partial feature bit
net: hns3: fix the port information display when sfp is absent
net: hns3: fix invalid mutex between tc qdisc and dcb ets command issue
net: hns3: fix debugfs concurrency issue between kfree buffer and read
net: hns3: fix byte order conversion issue in hclge_dbg_fd_tcam_read()
net: hns3: Support query tx timeout threshold by debugfs
net: hns3: fix tx timeout issue
net: phy: Provide Module 4 KSZ9477 errata (DS80000754C)
netfilter: nf_tables: Unbreak audit log reset
netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c
netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction
netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID
netfilter: nfnetlink_osf: avoid OOB read
netfilter: nftables: exthdr: fix 4-byte stack OOB write
selftests/bpf: Check bpf_sk_storage has uncharged sk_omem_alloc
bpf: bpf_sk_storage: Fix the missing uncharge in sk_omem_alloc
bpf: bpf_sk_storage: Fix invalid wait context lockdep report
s390/bpf: Pass through tail call counter in trampolines
...
- Convert st,stih407-irq-syscfg and Omnivision OV7251 bindings to DT
schema
- Merge Omnivision OV5695 into OV5693 binding
- Fix of_overlay_fdt_apply prototype when !CONFIG_OF_OVERLAY
-----BEGIN PGP SIGNATURE-----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=n+1p
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull more devicetree updates from Rob Herring:
"A couple of conversions which didn't get picked up by the subsystems
and one fix:
- Convert st,stih407-irq-syscfg and Omnivision OV7251 bindings to DT
schema
- Merge Omnivision OV5695 into OV5693 binding
- Fix of_overlay_fdt_apply prototype when !CONFIG_OF_OVERLAY"
* tag 'devicetree-fixes-for-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: irqchip: convert st,stih407-irq-syscfg to DT schema
media: dt-bindings: Convert Omnivision OV7251 to DT schema
media: dt-bindings: Merge OV5695 into OV5693 binding
of: overlay: Fix of_overlay_fdt_apply prototype when !CONFIG_OF_OVERLAY
This contains various cleanups and fixes across the board.
-----BEGIN PGP SIGNATURE-----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=kax5
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"Various cleanups and fixes across the board"
* tag 'pwm/for-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm: (31 commits)
pwm: lpc32xx: Remove handling of PWM channels
pwm: atmel: Simplify using devm functions
dt-bindings: pwm: brcm,kona-pwm: convert to YAML
pwm: stmpe: Handle errors when disabling the signal
pwm: stm32: Simplify using devm_pwmchip_add()
pwm: stm32: Don't modify HW state in .remove() callback
pwm: Fix order of freeing resources in pwmchip_remove()
pwm: ntxec: Use device_set_of_node_from_dev()
pwm: ntxec: Drop a write-only variable from driver data
pwm: pxa: Don't reimplement of_device_get_match_data()
pwm: lpc18xx-sct: Simplify using devm_clk_get_enabled()
pwm: atmel-tcb: Don't track polarity in driver data
pwm: atmel-tcb: Unroll atmel_tcb_pwm_set_polarity() into only caller
pwm: atmel-tcb: Put per-channel data into driver data
pwm: atmel-tcb: Fix resource freeing in error path and remove
pwm: atmel-tcb: Harmonize resource allocation order
pwm: Drop unused #include <linux/radix-tree.h>
pwm: rz-mtu3: Fix build warning 'num_channel_ios' not described
pwm: Remove outdated documentation for pwmchip_remove()
pwm: atmel: Enable clk when pwm already enabled in bootloader
...
Subsystem:
- Add a way for drivers to tell the core the supported alarm range is smaller
than the date range. This is not used yet but will be useful for the
alarmtimers in the next release.
- fix Wvoid-pointer-to-enum-cast warnings
- remove redundant of_match_ptr()
- stop warning for invalid alarms when the alarm is disabled
Drivers:
- isl12022: allow setting the trip level for battery level detection
- pcf2127: add support for PCF2131 and multiple timestamps
- stm32: time precision improvement, many fixes
- twl: NVRAM support
-----BEGIN PGP SIGNATURE-----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=4kkJ
-----END PGP SIGNATURE-----
Merge tag 'rtc-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- Add a way for drivers to tell the core the supported alarm range is
smaller than the date range. This is not used yet but will be
useful for the alarmtimers in the next release.
- fix Wvoid-pointer-to-enum-cast warnings
- remove redundant of_match_ptr()
- stop warning for invalid alarms when the alarm is disabled
Drivers:
- isl12022: allow setting the trip level for battery level detection
- pcf2127: add support for PCF2131 and multiple timestamps
- stm32: time precision improvement, many fixes
- twl: NVRAM support"
* tag 'rtc-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (73 commits)
dt-bindings: rtc: ds3231: Remove text binding
rtc: wm8350: remove unnecessary messages
rtc: twl: remove unnecessary messages
rtc: sun6i: remove unnecessary message
rtc: stop warning for invalid alarms when the alarm is disabled
rtc: twl: add NVRAM support
rtc: pcf85363: Allow to wake up system without IRQ
rtc: m48t86: add DT support for m48t86
dt-bindings: rtc: Add ST M48T86
rtc: pcf2127: remove useless check
rtc: rzn1: Report maximum alarm limit to rtc core
rtc: ds1305: Report maximum alarm limit to rtc core
rtc: tps6586x: Report maximum alarm limit to rtc core
rtc: cmos: Report supported alarm limit to rtc infrastructure
rtc: cros-ec: Detect and report supported alarm window size
rtc: Add support for limited alarm timer offsets
rtc: isl1208: Fix incorrect logic in isl1208_set_xtoscb()
MAINTAINERS: remove obsolete pattern in RTC SUBSYSTEM section
rtc: tps65910: Remove redundant dev_warn() and do not check for 0 return after calling platform_get_irq()
rtc: omap: Do not check for 0 return after calling platform_get_irq()
...
Core:
- Fix SETDASA when static and dynamic adress are equal
- Fix cmd_v1 DAA exit criteria
Drivers:
- svc: allow probing without any device
-----BEGIN PGP SIGNATURE-----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=av5t
-----END PGP SIGNATURE-----
Merge tag 'i3c/for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"Core:
- Fix SETDASA when static and dynamic adress are equal
- Fix cmd_v1 DAA exit criteria
Drivers:
- svc: allow probing without any device"
* tag 'i3c/for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: svc: fix probe failure when no i3c device exist
i3c: master: Fix SETDASA process
dt-bindings: i3c: Fix description for assigned-address
i3c: master: svc: Describe member 'saved_regs'
i3c: master: svc: Do not check for 0 return after calling platform_get_irq()
i3c/master: cmd_v1: Fix the exit criteria for the daa procedure
i3c: Explicitly include correct DT includes
A couple of fixes that came in during the merge window, both driver
specific - one for a bug that came up in testing, one for a bug due to a
misreading of the datasheet.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmT5wtcACgkQJNaLcl1U
h9D42Qf+LB9UYFJKAXPyLkpQYGHKbSaqz6hIMFWjmpsVjvuahI63wVRv/GoPZDIU
B1Zy8mrC4t37BK/CmjlwvxVFPuY+DaYTTBjjnSEnfrDsQZ+PgfIRmfqzxp/q6TYr
cpDOg/HrLkvfzNoTVtnUDz4Kn1l66OAMWXlwZ/AZEW8uD/JY172H7tBfjqDdzDvc
NCxKW0FO/pX07kc1IFaPl6UvZRqJLQUkYl7dKFl7PrG6Lzh1+FKQSUmtZY33Ndgd
LqFux/mc3jsV5E6Y0F899Lf1890VxzYHpbwT1QrHdaXhbqoACrQoaFfLfvd5YQLY
K9ncwzj8hNM87t0LYLH09lSsH5L2Xw==
=UyE6
-----END PGP SIGNATURE-----
Merge tag 'regulator-fix-v6.6-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fixes from Mark Brown:
"A couple of fixes that came in during the merge window, both driver
specific - one for a bug that came up in testing, one for a bug due
to a misreading of the datasheet"
* tag 'regulator-fix-v6.6-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: tps6594-regulator: Fix random kernel crash
regulator: tps6287x: Fix n_voltages
A couple of fixes for the sun6i driver, the patch to reduce DMA RX to
single byte width all the time is *hopefully* excessively cautious but
it's unclear which SoCs are affected so the fix just covers everything
for safety.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmT5wQ0ACgkQJNaLcl1U
h9Bltgf/T7tViGF1+g0fUx7Nlju+h8Hg3qBhlE+VKwRO6/qjBczT4ny4nkiej+CK
IapuEDul+F56Cy4/dgyFQkICTCm7qGev+r7Oya0OCWqAiXif5fz/zfxc4rHUzRA9
lZrdWrYNxhlAqcDu80G00nh5Gx5UCpTHEriWJQUQ0oxXGQoPRPW2WczMsksF6QLs
gnqr7hhIWzSvj0OOHVWi6a1iOMVgw0ICEgUF6TSoDsMOzvi6c1WVnCLZaE6udWhv
0wwOBzH1YBbwhfK/RdjUcSfHIy/jI2Gs7BnrUWviIfQSCb90V9YvAGlgusJAR4Ks
Y5UM3d8pVxQg5tW75IFjMt/fic6Rfg==
=HZqv
-----END PGP SIGNATURE-----
Merge tag 'spi-fix-v6.6-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of fixes for the sun6i driver. The patch to reduce DMA RX to
single byte width all the time is *hopefully* excessively cautious but
it's unclear which SoCs are affected so the fix just covers everything
for safety"
* tag 'spi-fix-v6.6-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: sun6i: fix race between DMA RX transfer completion and RX FIFO drain
spi: sun6i: reduce DMA RX transfer width to single byte
* Clean up vCPU targets, always returning generic v8 as the preferred target
* Trap forwarding infrastructure for nested virtualization (used for traps
that are taken from an L2 guest and are needed by the L1 hypervisor)
* FEAT_TLBIRANGE support to only invalidate specific ranges of addresses
when collapsing a table PTE to a block PTE. This avoids that the guest
refills the TLBs again for addresses that aren't covered by the table PTE.
* Fix vPMU issues related to handling of PMUver.
* Don't unnecessary align non-stack allocations in the EL2 VA space
* Drop HCR_VIRT_EXCP_MASK, which was never used...
* Don't use smp_processor_id() in kvm_arch_vcpu_load(),
but the cpu parameter instead
* Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
* Remove prototypes without implementations
RISC-V:
* Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest
* Added ONE_REG interface for SATP mode
* Added ONE_REG interface to enable/disable multiple ISA extensions
* Improved error codes returned by ONE_REG interfaces
* Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V
* Added get-reg-list selftest for KVM RISC-V
s390:
* PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
* Guest debug fixes (Ilya)
x86:
* Clean up KVM's handling of Intel architectural events
* Intel bugfixes
* Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use debug
registers and generate/handle #DBs
* Clean up LBR virtualization code
* Fix a bug where KVM fails to set the target pCPU during an IRTE update
* Fix fatal bugs in SEV-ES intrahost migration
* Fix a bug where the recent (architecturally correct) change to reinject
#BP and skip INT3 broke SEV guests (can't decode INT3 to skip it)
* Retry APIC map recalculation if a vCPU is added/enabled
* Overhaul emergency reboot code to bring SVM up to par with VMX, tie the
"emergency disabling" behavior to KVM actually being loaded, and move all of
the logic within KVM
* Fix user triggerable WARNs in SVM where KVM incorrectly assumes the TSC
ratio MSR cannot diverge from the default when TSC scaling is disabled
up related code
* Add a framework to allow "caching" feature flags so that KVM can check if
the guest can use a feature without needing to search guest CPUID
* Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU
* Fix KVM's handling of !visible guest roots to avoid premature triple fault
injection
* Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the API surface
that is needed by external users (currently only KVMGT), and fix a variety
of issues in the process
This last item had a silly one-character bug in the topic branch that
was sent to me. Because it caused pretty bad selftest failures in
some configurations, I decided to squash in the fix. So, while the
exact commit ids haven't been in linux-next, the code has (from the
kvm-x86 tree).
Generic:
* Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier events to pass
action specific data without needing to constantly update the main handlers.
* Drop unused function declarations
Selftests:
* Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
* Add support for printf() in guest code and covert all guest asserts to use
printf-based reporting
* Clean up the PMU event filter test and add new testcases
* Include x86 selftests in the KVM x86 MAINTAINERS entry
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmT1m0kUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroMNgggAiN7nz6UC423FznuI+yO3TLm8tkx1
CpKh5onqQogVtchH+vrngi97cfOzZb1/AtifY90OWQi31KEWhehkeofcx7G6ERhj
5a9NFADY1xGBsX4exca/VHDxhnzsbDWaWYPXw5vWFWI6erft9Mvy3tp1LwTvOzqM
v8X4aWz+g5bmo/DWJf4Wu32tEU6mnxzkrjKU14JmyqQTBawVmJ3RYvHVJ/Agpw+n
hRtPAy7FU6XTdkmq/uCT+KUHuJEIK0E/l1js47HFAqSzwdW70UDg14GGo1o4ETxu
RjZQmVNvL57yVgi6QU38/A0FWIsWQm5IlaX1Ug6x8pjZPnUKNbo9BY4T1g==
=W+4p
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"ARM:
- Clean up vCPU targets, always returning generic v8 as the preferred
target
- Trap forwarding infrastructure for nested virtualization (used for
traps that are taken from an L2 guest and are needed by the L1
hypervisor)
- FEAT_TLBIRANGE support to only invalidate specific ranges of
addresses when collapsing a table PTE to a block PTE. This avoids
that the guest refills the TLBs again for addresses that aren't
covered by the table PTE.
- Fix vPMU issues related to handling of PMUver.
- Don't unnecessary align non-stack allocations in the EL2 VA space
- Drop HCR_VIRT_EXCP_MASK, which was never used...
- Don't use smp_processor_id() in kvm_arch_vcpu_load(), but the cpu
parameter instead
- Drop redundant call to kvm_set_pfn_accessed() in user_mem_abort()
- Remove prototypes without implementations
RISC-V:
- Zba, Zbs, Zicntr, Zicsr, Zifencei, and Zihpm support for guest
- Added ONE_REG interface for SATP mode
- Added ONE_REG interface to enable/disable multiple ISA extensions
- Improved error codes returned by ONE_REG interfaces
- Added KVM_GET_REG_LIST ioctl() implementation for KVM RISC-V
- Added get-reg-list selftest for KVM RISC-V
s390:
- PV crypto passthrough enablement (Tony, Steffen, Viktor, Janosch)
Allows a PV guest to use crypto cards. Card access is governed by
the firmware and once a crypto queue is "bound" to a PV VM every
other entity (PV or not) looses access until it is not bound
anymore. Enablement is done via flags when creating the PV VM.
- Guest debug fixes (Ilya)
x86:
- Clean up KVM's handling of Intel architectural events
- Intel bugfixes
- Add support for SEV-ES DebugSwap, allowing SEV-ES guests to use
debug registers and generate/handle #DBs
- Clean up LBR virtualization code
- Fix a bug where KVM fails to set the target pCPU during an IRTE
update
- Fix fatal bugs in SEV-ES intrahost migration
- Fix a bug where the recent (architecturally correct) change to
reinject #BP and skip INT3 broke SEV guests (can't decode INT3 to
skip it)
- Retry APIC map recalculation if a vCPU is added/enabled
- Overhaul emergency reboot code to bring SVM up to par with VMX, tie
the "emergency disabling" behavior to KVM actually being loaded,
and move all of the logic within KVM
- Fix user triggerable WARNs in SVM where KVM incorrectly assumes the
TSC ratio MSR cannot diverge from the default when TSC scaling is
disabled up related code
- Add a framework to allow "caching" feature flags so that KVM can
check if the guest can use a feature without needing to search
guest CPUID
- Rip out the ancient MMU_DEBUG crud and replace the useful bits with
CONFIG_KVM_PROVE_MMU
- Fix KVM's handling of !visible guest roots to avoid premature
triple fault injection
- Overhaul KVM's page-track APIs, and KVMGT's usage, to reduce the
API surface that is needed by external users (currently only
KVMGT), and fix a variety of issues in the process
Generic:
- Wrap kvm_{gfn,hva}_range.pte in a union to allow mmu_notifier
events to pass action specific data without needing to constantly
update the main handlers.
- Drop unused function declarations
Selftests:
- Add testcases to x86's sync_regs_test for detecting KVM TOCTOU bugs
- Add support for printf() in guest code and covert all guest asserts
to use printf-based reporting
- Clean up the PMU event filter test and add new testcases
- Include x86 selftests in the KVM x86 MAINTAINERS entry"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (279 commits)
KVM: x86/mmu: Include mmu.h in spte.h
KVM: x86/mmu: Use dummy root, backed by zero page, for !visible guest roots
KVM: x86/mmu: Disallow guest from using !visible slots for page tables
KVM: x86/mmu: Harden TDP MMU iteration against root w/o shadow page
KVM: x86/mmu: Harden new PGD against roots without shadow pages
KVM: x86/mmu: Add helper to convert root hpa to shadow page
drm/i915/gvt: Drop final dependencies on KVM internal details
KVM: x86/mmu: Handle KVM bookkeeping in page-track APIs, not callers
KVM: x86/mmu: Drop @slot param from exported/external page-track APIs
KVM: x86/mmu: Bug the VM if write-tracking is used but not enabled
KVM: x86/mmu: Assert that correct locks are held for page write-tracking
KVM: x86/mmu: Rename page-track APIs to reflect the new reality
KVM: x86/mmu: Drop infrastructure for multiple page-track modes
KVM: x86/mmu: Use page-track notifiers iff there are external users
KVM: x86/mmu: Move KVM-only page-track declarations to internal header
KVM: x86: Remove the unused page-track hook track_flush_slot()
drm/i915/gvt: switch from ->track_flush_slot() to ->track_remove_region()
KVM: x86: Add a new page-track hook to handle memslot deletion
drm/i915/gvt: Don't bother removing write-protection on to-be-deleted slot
KVM: x86: Reject memslot MOVE operations if KVMGT is attached
...
enetc_psi_create() returns an ERR_PTR() or a valid station interface
pointer, but checking for the non-NULL quality of the return code blurs
that difference away. So if enetc_psi_create() fails, we call
enetc_psi_destroy() when we shouldn't. This will likely result in
crashes, since enetc_psi_create() cleans up everything after itself when
it returns an ERR_PTR().
Fixes: f0168042a2 ("net: enetc: reimplement RFS/RSS memory clearing as PCI quirk")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/netdev/582183ef-e03b-402b-8e2d-6d9bb3c83bd9@moroto.mountain/
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230906141609.247579-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Couple of virtual vs physical address confusion fixes
- Rework locking in dcssblk driver to address a lockdep warning
- Remove support for "noexec" kernel command line option since there
is no use case where it would make sense
- Simplify kernel mapping setup and get rid of quite a bit of code
- Add architecture specific __set_memory_yy() functions which allow to
modify kernel mappings. Unlike the set_memory_xx() variants they
take void pointer start and end parameters, which allows to use them
without the usual casts, and also to use them on areas larger than
8TB.
Note that the set_memory_xx() family comes with an int num_pages
parameter which overflows with 8TB. This could be addressed by
changing the num_pages parameter to unsigned long, however requires
to change all architectures, since the module code expects an int
parameter (see module_set_memory()).
This was indeed an issue since for debug_pagealloc() we call
set_memory_4k() on the whole identity mapping. Therefore address
this for now with the __set_memory_yy() variant, and address common
code later
- Use dev_set_name() and also fix memory leak in zcrypt driver error
handling
- Remove unused lsi_mask from airq_struct
- Add warning for invalid kernel mapping requests
-----BEGIN PGP SIGNATURE-----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=+iSZ
-----END PGP SIGNATURE-----
Merge tag 's390-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Heiko Carstens:
- A couple of virtual vs physical address confusion fixes
- Rework locking in dcssblk driver to address a lockdep warning
- Remove support for "noexec" kernel command line option since there is
no use case where it would make sense
- Simplify kernel mapping setup and get rid of quite a bit of code
- Add architecture specific __set_memory_yy() functions which allow us
to modify kernel mappings. Unlike the set_memory_xx() variants they
take void pointer start and end parameters, which allows using them
without the usual casts, and also to use them on areas larger than
8TB.
Note that the set_memory_xx() family comes with an int num_pages
parameter which overflows with 8TB. This could be addressed by
changing the num_pages parameter to unsigned long, however requires
to change all architectures, since the module code expects an int
parameter (see module_set_memory()).
This was indeed an issue since for debug_pagealloc() we call
set_memory_4k() on the whole identity mapping. Therefore address this
for now with the __set_memory_yy() variant, and address common code
later
- Use dev_set_name() and also fix memory leak in zcrypt driver error
handling
- Remove unused lsi_mask from airq_struct
- Add warning for invalid kernel mapping requests
* tag 's390-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/vmem: do not silently ignore mapping limit
s390/zcrypt: utilize dev_set_name() ability to use a formatted string
s390/zcrypt: don't leak memory if dev_set_name() fails
s390/mm: fix MAX_DMA_ADDRESS physical vs virtual confusion
s390/airq: remove lsi_mask from airq_struct
s390/mm: use __set_memory() variants where useful
s390/set_memory: add __set_memory() variant
s390/set_memory: generate all set_memory() functions
s390/mm: improve description of mapping permissions of prefix pages
s390/amode31: change type of __samode31, __eamode31, etc
s390/mm: simplify kernel mapping setup
s390: remove "noexec" option
s390/vmem: fix virtual vs physical address confusion
s390/dcssblk: fix lockdep warning
s390/monreader: fix virtual vs physical address confusion
- enable MTD XIP support
- fix base address of the xtensa perf module in newer hardware
-----BEGIN PGP SIGNATURE-----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=GV6O
-----END PGP SIGNATURE-----
Merge tag 'xtensa-20230905' of https://github.com/jcmvbkbc/linux-xtensa
Pull xtensa updates from Max Filippov:
- enable MTD XIP support
- fix base address of the xtensa perf module in newer hardware
* tag 'xtensa-20230905' of https://github.com/jcmvbkbc/linux-xtensa:
xtensa: add XIP-aware MTD support
xtensa: PMU: fix base address for the newer hardware
Recently we moved most cleanup from ntfs_put_super() into
ntfs3_kill_sb() as part of a bigger cleanup. This accidently also moved
dropping inode references stashed in ntfs3's sb->s_fs_info from
@sb->put_super() to @sb->kill_sb(). But generic_shutdown_super()
verifies that there are no busy inodes past sb->put_super(). Fix this
and disentangle dropping inode references from freeing @sb->s_fs_info.
Fixes: a4f64a300a ("ntfs3: free the sbi in ->kill_sb") # mainline only
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mateusz reports that glibc turns 'fstat()' calls into 'fstatat()', and
that seems to have been going on for quite a long time due to glibc
having tried to simplify its stat logic into just one point.
This turns out to cause completely unnecessary overhead, where we then
go off and allocate the kernel side pathname, and actually look up the
empty path. Sure, our path lookup is quite optimized, but it still
causes a fair bit of allocation overhead and a couple of completely
unnecessary rounds of lockref accesses etc.
This is all hopefully getting fixed in user space, and there is a patch
floating around for just having glibc use the native fstat() system
call. But even with the current situation we can at least improve on
things by catching the situation and short-circuiting it.
Note that this is still measurably slower than just a plain 'fstat()',
since just checking that the filename is actually empty is somewhat
expensive due to inevitable user space access overhead from the kernel
(ie verifying pointers, and SMAP on x86). But it's still quite a bit
faster than actually looking up the path for real.
To quote numers from Mateusz:
"Sapphire Rapids, will-it-scale, ops/s
stock fstat 5088199
patched fstat 7625244 (+49%)
real fstat 8540383 (+67% / +12%)"
where that 'stock fstat' is the glibc translation of fstat into
fstatat() with an empty path, the 'patched fstat' is with this short
circuiting of the path lookup, and the 'real fstat' is the actual native
fstat() system call with none of this overhead.
Link: https://lore.kernel.org/lkml/20230903204858.lv7i3kqvw6eamhgz@f/
Reported-by: Mateusz Guzik <mjguzik@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 3e00123a13.
No, we never export random symbols for out of tree modules.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230905081902.321778-1-hch@lst.de
-----BEGIN PGP SIGNATURE-----
iQJBBAABCAArFiEEgKkgxbID4Gn1hq6fcJGo2a1f9gAFAmT4pk0NHGZ3QHN0cmxl
bi5kZQAKCRBwkajZrV/2AFILEADUXdj4PWEZv0/1avh+cT14q4gM0KkNi0eWDePA
kRRTvuVZd6CkAxMNW9EAa6koJdK7k7dq2Jax9MYgzvvkFBO5PH5HHvwQRjs+Ch4W
WCckV83J0W2eTcPqSxTM6wbSL8p1a0rJSHVSG7N431dPQUJoMnmd4zW5q1P9qTkv
gqE4iQoK2jGL01GOyuQLnh6fEH2TUviguXZPKxVymoy/pbBiDA1mAMQplyAJisAz
c1lAb+/oW58xYpxTOCtlU3kqB4tPonUow8x8KkYrlZlrA8rxgr2WkVeg82eVXP9u
X8DM/nSzxCY7aN3TVrS2m8dS1cK1Gj841atuPA2N9ot/R954h7VjxhvhW1IEpmY9
P6EYvRrLtCZrif4cmbRY4n6UztFNo3FJeBgmM3pgiVQhCXm+1fpNnSTm3QvZY1YO
6o5rQn7F7IiIzkBeQ5sPihQPvLqn+J/61ZyQWAdP/TAG+roC0ARPeEFjyBoRHttI
uw4PcXuzrMjBzym816h8kAjJbVIygpZFIpA/QllN8d3rB96mWpFCILIBG9FnA91K
Ie6IyRGjDKfe5TuJplSIfCdBrvOPqUjc+l7XAPz9QXL8W3MQnYZshHRs5ViSOaca
iMhMScBYT31uBZ7KODYxgPcifr0EWSYIGceWnSCDOmRz+VJk1LSfvZTwvqOB+qZ3
x01bTw==
=Z3CA
-----END PGP SIGNATURE-----
Merge tag 'nf-23-09-06' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Florian Westphal says:
====================
netfilter updates for net
This PR contains nf_tables updates for your *net* tree.
This time almost all fixes are for old bugs:
First patch fixes a 4-byte stack OOB write, from myself.
This was broken ever since nftables was switches from 128 to 32bit
register addressing in v4.1.
2nd patch fixes an out-of-bounds read.
This has been broken ever since xt_osf got added in 2.6.31, the bug
was then just moved around during refactoring, from Wander Lairson Costa.
3rd patch adds a missing enum description, from Phil Sutter.
4th patch fixes a UaF inftables that occurs when userspace adds
elements with a timeout so small that expiration happens while the
transaction is still in progress. Fix from Pablo Neira Ayuso.
Patch 5 fixes a memory out of bounds access, this was
broken since v4.20. Patch from Kyle Zeng and Jozsef Kadlecsik.
Patch 6 fixes another bogus memory access when building audit
record. Bug added in the previous pull request, fix from Pablo.
netfilter pull request 2023-09-06
* tag 'nf-23-09-06' of https://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: Unbreak audit log reset
netfilter: ipset: add the missing IP_SET_HASH_WITH_NET0 macro for ip_set_hash_netportnet.c
netfilter: nft_set_rbtree: skip sync GC for new elements in this transaction
netfilter: nf_tables: uapi: Describe NFTA_RULE_CHAIN_ID
netfilter: nfnetlink_osf: avoid OOB read
netfilter: nftables: exthdr: fix 4-byte stack OOB write
====================
Link: https://lore.kernel.org/r/20230906162525.11079-1-fw@strlen.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
HNS3 NIC does not support GSO partial packets segmentation. Actually tunnel
packets for example NvGRE packets segment offload and checksum offload is
already supported. There is no need to keep gso partial feature bit. So
this patch removes it.
Fixes: 76ad4f0ee7 ("net: hns3: Add support of HNS3 Ethernet Driver for hip08 SoC")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When sfp is absent or unidentified, the port type should be
displayed as PORT_OTHERS, rather than PORT_FIBRE.
Fixes: 88d10bd6f7 ("net: hns3: add support for multiple media type")
Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
We hope that tc qdisc and dcb ets commands can not be used crosswise.
If we want to use any of the commands to configure tc,
We must use the other command to clear the existing configuration.
However, when we configure a single tc with tc qdisc,
we can still configure it with dcb ets.
Because we use mqprio_active as the tag of tc qdisc configuration,
but with dcb ets, we do not check mqprio_active.
This patch fix this issue by check mqprio_active before
executing the dcb ets command. and add dcb_ets_active to
replace HCLGE_FLAG_DCB_ENABLE and HCLGE_FLAG_MQPRIO_ENABLE
at the hclge layer,
Fixes: cacde272dd ("net: hns3: Add hclge_dcb module for the support of DCB feature")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Now in hns3_dbg_uninit(), there may be concurrency between
kfree buffer and read, it may result in memory error.
Moving debugfs_remove_recursive() in front of kfree buffer to ensure
they don't happen at the same time.
Fixes: 5e69ea7ee2 ("net: hns3: refactor the debugfs process")
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
req1->tcam_data is defined as "u8 tcam_data[8]", and we convert it as
(u32 *) without considerring byte order conversion,
it may result in printing wrong data for tcam_data.
Convert tcam_data to (__le32 *) first to fix it.
Fixes: b5a0b70d77 ("net: hns3: refactor dump fd tcam of debugfs")
Signed-off-by: Hao Chen <chenhao418@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, the driver knocks the ring doorbell before updating
the ring->last_to_use in tx flow. if the hardware transmiting
packet and napi poll scheduling are fast enough, it may get
the old ring->last_to_use in drivers' napi poll.
In this case, the driver will think the tx is not completed, and
return directly without clear the flag __QUEUE_STATE_STACK_XOFF,
which may cause tx timeout.
Fixes: 20d06ca267 ("net: hns3: optimize the tx clean process")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The KSZ9477 errata points out (in 'Module 4') the link up/down problems
when EEE (Energy Efficient Ethernet) is enabled in the device to which
the KSZ9477 tries to auto negotiate.
The suggested workaround is to clear advertisement of EEE for PHYs in
this chip driver.
To avoid regressions with other switch ICs the new MICREL_NO_EEE flag
has been introduced.
Moreover, the in-register disablement of MMD_DEVICE_ID_EEE_ADV.MMD_EEE_ADV
MMD register is removed, as this code is both; now executed too late
(after previous rework of the PHY and DSA for KSZ switches) and not
required as setting all members of eee_broken_modes bit field prevents
the KSZ9477 from advertising EEE.
Fixes: 69d3b36ca0 ("net: dsa: microchip: enable EEE support") # for KSZ9477
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # Confirmed disabled EEE with oscilloscope.
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20230905093315.784052-1-lukma@denx.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Restrict the wait for boot loader steady state only to SMUv13.0.6. For
older SOCs, ASIC init has a longer wait period and that takes care.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
