https://bugzilla.kernel.org/show_bug.cgi?id=200951
These is a NULL pointer dereference issue reported in bugzilla:
Hi,
in the setup there is a SATA SSD connected to a SATA-to-USB bridge.
The disc is "Samsung SSD 850 PRO 256G" which supports TRIM.
There are four partitions:
sda1: FAT /boot
sda2: F2FS /
sda3: F2FS /home
sda4: F2FS
The bridge is ASMT1153e which uses the "uas" driver.
There is no TRIM pass-through, so, when mounting it reports:
mounting with "discard" option, but the device does not support discard
The USB host is USB3.0 and UASP capable. It is the one on RK3399.
Given this everything works fine, except there is no TRIM support.
In order to enable TRIM a new UDEV rule is added [1]:
/etc/udev/rules.d/10-sata-bridge-trim.rules:
ACTION=="add|change", ATTRS{idVendor}=="174c", ATTRS{idProduct}=="55aa", SUBSYSTEM=="scsi_disk", ATTR{provisioning_mode}="unmap"
After reboot any F2FS write hangs forever and dmesg reports:
Unable to handle kernel NULL pointer dereference
Also tested on a x86_64 system: works fine even with TRIM enabled.
same disc
same bridge
different usb host controller
different cpu architecture
not root filesystem
Regards,
Vicenç.
[1] Post #5 in https://bbs.archlinux.org/viewtopic.php?id=236280
Unable to handle kernel NULL pointer dereference at virtual address 000000000000003e
Mem abort info:
ESR = 0x96000004
Exception class = DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
Data abort info:
ISV = 0, ISS = 0x00000004
CM = 0, WnR = 0
user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000626e3122
[000000000000003e] pgd=0000000000000000
Internal error: Oops: 96000004 [#1] SMP
Modules linked in: overlay snd_soc_hdmi_codec rc_cec dw_hdmi_i2s_audio dw_hdmi_cec snd_soc_simple_card snd_soc_simple_card_utils snd_soc_rockchip_i2s rockchip_rga snd_soc_rockchip_pcm rockchipdrm videobuf2_dma_sg v4l2_mem2mem rtc_rk808 videobuf2_memops analogix_dp videobuf2_v4l2 videobuf2_common dw_hdmi dw_wdt cec rc_core videodev drm_kms_helper media drm rockchip_thermal rockchip_saradc realtek drm_panel_orientation_quirks syscopyarea sysfillrect sysimgblt fb_sys_fops dwmac_rk stmmac_platform stmmac pwm_bl squashfs loop crypto_user gpio_keys hid_kensington
CPU: 5 PID: 957 Comm: nvim Not tainted 4.19.0-rc1-1-ARCH #1
Hardware name: Sapphire-RK3399 Board (DT)
pstate: 00000005 (nzcv daif -PAN -UAO)
pc : update_sit_entry+0x304/0x4b0
lr : update_sit_entry+0x108/0x4b0
sp : ffff00000ca13bd0
x29: ffff00000ca13bd0 x28: 000000000000003e
x27: 0000000000000020 x26: 0000000000080000
x25: 0000000000000048 x24: ffff8000ebb85cf8
x23: 0000000000000253 x22: 00000000ffffffff
x21: 00000000000535f2 x20: 00000000ffffffdf
x19: ffff8000eb9e6800 x18: ffff8000eb9e6be8
x17: 0000000007ce6926 x16: 000000001c83ffa8
x15: 0000000000000000 x14: ffff8000f602df90
x13: 0000000000000006 x12: 0000000000000040
x11: 0000000000000228 x10: 0000000000000000
x9 : 0000000000000000 x8 : 0000000000000000
x7 : 00000000000535f2 x6 : ffff8000ebff3440
x5 : ffff8000ebff3440 x4 : ffff8000ebe3a6c8
x3 : 00000000ffffffff x2 : 0000000000000020
x1 : 0000000000000000 x0 : ffff8000eb9e5800
Process nvim (pid: 957, stack limit = 0x0000000063a78320)
Call trace:
update_sit_entry+0x304/0x4b0
f2fs_invalidate_blocks+0x98/0x140
truncate_node+0x90/0x400
f2fs_remove_inode_page+0xe8/0x340
f2fs_evict_inode+0x2b0/0x408
evict+0xe0/0x1e0
iput+0x160/0x260
do_unlinkat+0x214/0x298
__arm64_sys_unlinkat+0x3c/0x68
el0_svc_handler+0x94/0x118
el0_svc+0x8/0xc
Code: f9400800 b9488400 36080140 f9400f01 (387c4820)
---[ end trace a0f21a307118c477 ]---
The reason is it is possible to enable discard flag on block queue via
UDEV, but during mount, f2fs will initialize se->discard_map only if
this flag is set, once the flag is set after mount, f2fs may dereference
NULL pointer on se->discard_map.
So this patch does below changes to fix this issue:
- initialize and update se->discard_map all the time.
- don't clear DISCARD option if device has no QUEUE_FLAG_DISCARD flag
during mount.
- don't issue small discard on zoned block device.
- introduce some functions to enhance the readability.
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Tested-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Add additinal sanity check for irregular case(e.g. corruption).
If size of extended attribution is smaller than size of acl header,
then return -EINVAL.
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Introduce a complementary function to i915_driver_create() to undo all
that is created.
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180905140921.17467-2-chris@chris-wilson.co.uk
The newly added internal rgb encoder for Rockchip vops is missing
stubs for the case that the rgb output part is not enabled in the
kernel config. So add these.
Fixes: 1f0f015151 (drm/rockchip: Add support for Rockchip Soc RGB output interface)
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[seanpaul fixed up checkpatch nits]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180905191302.26023-1-heiko@sntech.de
Since the LAN7515 on Raspberry Pi 3B+ doesn't have an EEPROM and the OTP
is empty, we need to enable the Ethernet LEDs via Device Tree.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Currently we always repost the recv buffer before we send a response
capsule back to the host. Since ordering is not guaranteed for send
and recv completions, it is posible that we will receive a new request
from the host before we got a send completion for the response capsule.
Today, we pre-allocate 2x rsps the length of the queue, but in reality,
under heavy load there is nothing that is really preventing the gap to
expand until we exhaust all our rsps.
To fix this, if we don't have any pre-allocated rsps left, we dynamically
allocate a rsp and make sure to free it when we are done. If under memory
pressure we fail to allocate a rsp, we silently drop the command and
wait for the host to retry.
Reported-by: Steve Wise <swise@opengridcomputing.com>
Tested-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
[hch: dropped a superflous assignment]
Signed-off-by: Christoph Hellwig <hch@lst.de>
The raspberrypi-hwmon driver doesn't automatically load, although it does work
when loaded, by adding the alias it auto loads as expected when built as a
module. Tested on RPi2/RPi3 on 32 bit kernel and RPi3B+ on aarch64 with
Fedora 28 and a patched 4.18 RC kernel.
Fixes: 3c493c885cf ("hwmon: Add support for RPi voltage sensor")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
CC: Stefan Wahren <stefan.wahren@i2se.com>
CC: Eric Anholt <eric@anholt.net>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
add CONFIG_MEMORY_HOTREMOVE=y in config
without this config, /sys/devices/system/memory/memory*/removable
always return 0, I endup getting an early skip during test
Signed-off-by: Lei Yang <Lei.Yang@windriver.com>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
- Atomic contexts, cansleep* calls and such fastpath/slopwpath
things.
- Defer ACPI event handler registration to late_initcall()
so IRQs do not fire in our face before other drivers have
a chance to register handlers.
- Race condition if a consumer requests a GPIO after
gpiochip_add_data_with_key() but before of_gpiochip_add()
- Probe errorpath in the dwapb driver.
-----BEGIN PGP SIGNATURE-----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=fXnt
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Some GPIO fixes. The ACPI stuff is probably the most annoying for
users that get fixed this time.
- Atomic contexts, cansleep* calls and such fastpath/slopwpath
things.
- Defer ACPI event handler registration to late_initcall() so IRQs do
not fire in our face before other drivers have a chance to register
handlers.
- Race condition if a consumer requests a GPIO after
gpiochip_add_data_with_key() but before of_gpiochip_add()
- Probe errorpath in the dwapb driver"
* tag 'gpio-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: Fix crash due to registration race
gpio: dwapb: Fix error handling in dwapb_gpio_probe()
gpiolib-acpi: Register GpioInt ACPI event handlers from a late_initcall
gpiolib: acpi: Switch to cansleep version of GPIO library call
gpio: adp5588: Fix sleep-in-atomic-context bug
A set of very minor fixes and a couple of reverts to fix a major
problem (the attempt to change the busy count causes a hang when
attempting to change the drive cache type).
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCW4+QYSYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbWyAP9VjOlI
8VOvkoWvHxGzN9m3DXnv6CVbNcqXC+7g8BYQmgD9HhFKrhfQXtwL+VT4k4G2K6l0
cVDMH3cUMMFhRxKR5DM=
=DYnk
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"A set of very minor fixes and a couple of reverts to fix a major
problem (the attempt to change the busy count causes a hang when
attempting to change the drive cache type)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: aacraid: fix a signedness bug
Revert "scsi: core: avoid host-wide host_busy counter for scsi_mq"
Revert "scsi: core: fix scsi_host_queue_ready"
scsi: libata: Add missing newline at end of file
scsi: target: iscsi: cxgbit: use pr_debug() instead of pr_info()
scsi: hpsa: limit transfer length to 1MB, not 512kB
scsi: lpfc: Correct MDS diag and nvmet configuration
scsi: lpfc: Default fdmi_on to on
scsi: csiostor: fix incorrect port capabilities
scsi: csiostor: add a check for NULL pointer after kmalloc()
scsi: documentation: add scsi_mod.use_blk_mq to scsi-parameters
scsi: core: Update SCSI_MQ_DEFAULT help text to match default
Here is the nds32 patch set based on 4.19-rc2.
Contained in here are the bug fixes, building error fixes and ftrace support
for nds32.
These are the LTP20170427 testing results.
Total Tests: 1902
Total Skipped Tests: 592
Total Failures: 420
Kernel Version: 4.19.0-rc2-00018-g2c9d30cc16f0-dirty
Machine Architecture: nds32
Signed-off-by: Greentime Hu <greentime@andestech.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.17 (GNU/Linux)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=DJCS
-----END PGP SIGNATURE-----
Merge tag 'nds32-for-linus-4.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux
Pull nds32 updates from Greentime Hu:
"Contained in here are the bug fixes, building error fixes and ftrace
support for nds32"
* tag 'nds32-for-linus-4.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux:
nds32: linker script: GCOV kernel may refers data in __exit
nds32: fix build error because of wrong semicolon
nds32: Fix a kernel panic issue because of wrong frame pointer access.
nds32: Only print one page of stack when die to prevent printing too much information.
nds32: Add macro definition for offset of lp register on stack
nds32: Remove the deprecated ABI implementation
nds32/stack: Get real return address by using ftrace_graph_ret_addr
nds32/ftrace: Support dynamic function graph tracer
nds32/ftrace: Support dynamic function tracer
nds32/ftrace: Add RECORD_MCOUNT support
nds32/ftrace: Support static function graph tracer
nds32/ftrace: Support static function tracer
nds32: Extract the checking and getting pointer to a macro
nds32: Clean up the coding style
nds32: Fix get_user/put_user macro expand pointer problem
nds32: Fix empty call trace
nds32: add NULL entry to the end of_device_id array
nds32: fix logic for module
Larger CODECs may contain many several hundred widgets and which set of
parameters is selected only needs to be recorded on a per DAI basis. As
such move the selected CODEC to CODEC link params to be stored in the
runtime rather than the DAPM widget, to save some memory.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently multi-CODEC is not supported on CODEC to CODEC links.
There are common applications where this would be useful, such
as connecting two mono amplifiers to an audio CODEC. Adding
support simply requires an update of snd_soc_dai_link_event
to loop over the attached CODEC DAIs.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, snd_soc_dapm_connect_dai_link_widgets connects up the routes
representing normal DAIs, however CODEC to CODEC links are hooked up
through separate infrastructure in soc_link_dai_widgets. Improve the
consistency of the code by using snd_soc_dapm_connect_dai_link for both
types of DAIs.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the function snd_soc_dapm_new_control to be next to
snd_soc_dapm_new_controls and add some kernel doc for it.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently DAPM has a lot of similar code to handle errors from
snd_soc_dapm_new_control_unlocked, and much of this code does
not really accurately reflect what the function returns.
Firstly, most places will check for a return value of
-EPROBE_DEFER and silence any error messages in that case. The
one notable exception here being dapm_kcontrol_data_alloc
which does currently print any error messages in the case
of snd_soc_dapm_new_control_unlocked returning NULL or an
error. Additionally the error prints being silenced in these
case are redundant as snd_soc_dapm_new_control_unlocked can
only return -EPROBE_DEFER or NULL when failing.
Secondly, most places will treat a return value of NULL as
an -ENOMEM. This is not correct either since any error except
EPROBE_DEFER will cause a return value of NULL from
snd_soc_dapm_new_control_unlocked.
Centralise this handling and the error messages within
snd_soc_dapm_new_control_unlocked and update the callers
to simply check IS_ERR and return. Note that this update is
slightly simpler in the case of dapm_kcontrol_data_alloc where
that is fairly close to the handling that was already in place.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Borislav reported the following splat:
=============================
WARNING: suspicious RCU usage
4.19.0-rc1+ #1 Not tainted
-----------------------------
./include/linux/rcupdate.h:631 rcu_read_lock() used illegally while idle!
other info that might help us debug this:
RCU used illegally from idle CPU!
rcu_scheduler_active = 2, debug_locks = 1
RCU used illegally from extended quiescent state!
1 lock held by swapper/0/0:
#0: 000000004557ee0e (rcu_read_lock){....}, at: perf_event_output_forward+0x0/0x130
stack backtrace:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.19.0-rc1+ #1
Hardware name: LENOVO 2320CTO/2320CTO, BIOS G2ET86WW (2.06 ) 11/13/2012
Call Trace:
dump_stack+0x85/0xcb
perf_event_output_forward+0xf6/0x130
__perf_event_overflow+0x52/0xe0
perf_swevent_overflow+0x91/0xb0
perf_tp_event+0x11a/0x350
? find_held_lock+0x2d/0x90
? __lock_acquire+0x2ce/0x1350
? __lock_acquire+0x2ce/0x1350
? retint_kernel+0x2d/0x2d
? find_held_lock+0x2d/0x90
? tick_nohz_get_sleep_length+0x83/0xb0
? perf_trace_cpu+0xbb/0xd0
? perf_trace_buf_alloc+0x5a/0xa0
perf_trace_cpu+0xbb/0xd0
cpuidle_enter_state+0x185/0x340
do_idle+0x1eb/0x260
cpu_startup_entry+0x5f/0x70
start_kernel+0x49b/0x4a6
secondary_startup_64+0xa4/0xb0
This is due to the tracepoints moving to SRCU usage which does not require
RCU to be "watching". But perf uses these tracepoints with RCU and expects
it to be. Hence, we still need to add in the rcu_irq_enter/exit_irqson()
calls for "rcuidle" tracepoints. This is a temporary fix until we have SRCU
working in NMI context, and then perf can be converted to use that instead
of normal RCU.
Link: http://lkml.kernel.org/r/20180904162611.6a120068@gandalf.local.home
Cc: x86-ml <x86@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Reported-by: Borislav Petkov <bp@alien8.de>
Tested-by: Borislav Petkov <bp@alien8.de>
Reviewed-by: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Fixes: e6753f23d9 ("tracepoint: Make rcuidle tracepoint callers use SRCU")
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
With performance optimization the spi transfer and messages of basic
register operations like qcaspi_read_register moved into the private
driver structure. But they weren't protected against mutual access
(e.g. between driver kthread and ethtool). So dumping the QCA7000
registers via ethtool during network traffic could make spi_sync
hang forever, because the completion in spi_message is overwritten.
So revert the optimization completely.
Fixes: 291ab06ecf ("net: qualcomm: new Ethernet over SPI driver for QCA700")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
DMA allocated memory is lost in be_cmd_get_profile_config() when we
call it with non-NULL port_res parameter.
Signed-off-by: Petr Oros <poros@redhat.com>
Reviewed-by: Ivan Vecera <ivecera@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following sparse warning:
drivers/net/ethernet/microchip/lan743x_ptp.c:980:6: warning:
symbol 'lan743x_ptp_set_sync_ts_insert' was not declared. Should it be static?
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes the following sparse warning:
drivers/net/ethernet/mellanox/mlx5/core/ipoib/ipoib.c:119:6: warning:
symbol 'mlx5i_grp_sw_update_stats' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some system may want to know if a detected digitizer device is either an
integrated or an external device. In order to distinguish such condition,
setting either INPUT_PROP_DIRECT or INPUT_PROP_POINTER is required,
checking the member, "application", in "hid_field" structure.
Signed-off-by: Tatsunosuke Tobita <tobita.tatsunosuke@wacom.co.jp>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
MC-aware mode was recently enabled by mlxsw on Spectrum switches in
commit 7b81953066 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw
ports"). Unfortunately, testing has shown that the fix is incomplete and
in the presented form actually makes the problem even worse, because any
amount of MC traffic causes UC disruption.
The reason for this is that currently, mlxsw configures the MC-specific
TCs (8..15) to map to pool 0. It also configures a maximum buffer size
of 0, but for MC traffic that maximum is disregarded and not part of the
quota. Therefore MC traffic is always admitted to the egress buffer.
Fix the configuration by directing the MC TCs into pool 15, which is
dedicated to MC traffic and recognized as such by the silicon.
Fixes: 7b81953066 ("mlxsw: spectrum: Configure MC-aware mode on mlxsw ports")
Signed-off-by: Petr Machata <petrm@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
the changes:
* changes to make PTK rekeying work better, or actually
better/safely if drivers get updated
* VHT extended NSS support - some APs had capabilities
that didn't fit into the VHT (11ac) spec, so the spec
was updated and we follow that now
* some TXQ and A-MSDU building work - will allow iwlwifi
to use this soon
* more HE work, including aligning to 802.11ax Draft 3.0
* L-SIG and 0-length-PSDU support in radiotap
-----BEGIN PGP SIGNATURE-----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=HYA6
-----END PGP SIGNATURE-----
Merge tag 'mac80211-next-for-davem-2018-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next
Johannes Berg says:
====================
This time, we have some pretty impactful work. Among
the changes:
* changes to make PTK rekeying work better, or actually
better/safely if drivers get updated
* VHT extended NSS support - some APs had capabilities
that didn't fit into the VHT (11ac) spec, so the spec
was updated and we follow that now
* some TXQ and A-MSDU building work - will allow iwlwifi
to use this soon
* more HE work, including aligning to 802.11ax Draft 3.0
* L-SIG and 0-length-PSDU support in radiotap
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Here are two fixes for array-underflow bugs in completion handlers due
to insufficient sanity checks.
All have been in linux-next with no reported issues.
Signed-off-by: Johan Hovold <johan@kernel.org>
-----BEGIN PGP SIGNATURE-----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=XYLd
-----END PGP SIGNATURE-----
Merge tag 'usb-serial-4.19-rc3' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus
Johan writes:
USB-serial fixes for v4.19-rc3
Here are two fixes for array-underflow bugs in completion handlers due
to insufficient sanity checks.
All have been in linux-next with no reported issues.
Signed-off-by: Johan Hovold <johan@kernel.org>
If the kernel headers aren't installed we can't build all the tests.
Add a new make target rule 'khdr' in the file lib.mk to generate the
kernel headers and that gets include for every test-dir Makefile that
includes lib.mk If the testdir in turn have its own sub-dirs the
top_srcdir needs to be set to the linux-rootdir to be able to generate
the kernel headers.
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Fathi Boudra <fathi.boudra@linaro.org>
Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
crtc_state is accessed by both vblank_handle() and the ordered
work_struct handle vkms_crc_work_handle() to retrieve and or update
the frame number for computed CRC.
Since work_struct can fail, add frame_end to account for missing frame
numbers.
Use (frame_[start/end]) for synchronization between hrtimer callback
and ordered work_struct handle.
This patch passes the following subtests from igt kms_pipe_crc_basic test:
bad-source, read-crc-pipe-A, read-crc-pipe-A-frame-sequence,
nonblocking-crc-pipe-A, nonblocking-crc-pipe-A-frame-sequence
Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180903211743.GA2773@haneenDRM
Add the core display subsystem and vop nodes to rk3188.
Vop0 has a fully dedicated set of pins and only vop1 needs to
do pinctrl to have display output, so also add the necessary
pinctrl entries for it.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by Sandy Huang <hjc@rock-chips.com>
When we don't have the iputils-debuginfo package installed, i.e. when we
don't have the DWARF information needed to resolve ping's samples, we
end up failing this 'perf test' entry:
# perf test ping
62: probe libc's inet_pton & backtrace it with ping : Ok
# rpm -e iputils-debuginfo
# perf test ping
62: probe libc's inet_pton & backtrace it with ping : FAILED!
#
Fix it to accept "[unknown]" where the symbol + offset, when resolved,
is expected.
I think this will fail in the other arches as well, but since I can't
test now, I'm leaving s390x and ppc cases as-is.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Sandipan Das <sandipan@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 7903a70867 ("perf script: Show symbol offsets by default")
Link: https://lkml.kernel.org/n/tip-hnizqwqrs03vcq1b74yao0f6@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
wdm_in_callback() is a completion handler function for the USB driver.
So it should not sleep. But it calls service_outstanding_interrupt(),
which calls usb_submit_urb() with GFP_KERNEL.
To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC.
This bug is found by my static analysis tool DSAC.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
async_complete() in uss720.c is a completion handler function for the
USB driver. So it should not sleep, but it is can sleep according to the
function call paths (from bottom to top) in Linux-4.16.
[FUNC] set_1284_register(GFP_KERNEL)
drivers/usb/misc/uss720.c, 372:
set_1284_register in parport_uss720_frob_control
drivers/parport/ieee1284.c, 560:
[FUNC_PTR]parport_uss720_frob_control in parport_ieee1284_ack_data_avail
drivers/parport/ieee1284.c, 577:
parport_ieee1284_ack_data_avail in parport_ieee1284_interrupt
./include/linux/parport.h, 474:
parport_ieee1284_interrupt in parport_generic_irq
drivers/usb/misc/uss720.c, 116:
parport_generic_irq in async_complete
[FUNC] get_1284_register(GFP_KERNEL)
drivers/usb/misc/uss720.c, 382:
get_1284_register in parport_uss720_read_status
drivers/parport/ieee1284.c, 555:
[FUNC_PTR]parport_uss720_read_status in parport_ieee1284_ack_data_avail
drivers/parport/ieee1284.c, 577:
parport_ieee1284_ack_data_avail in parport_ieee1284_interrupt
./include/linux/parport.h, 474:
parport_ieee1284_interrupt in parport_generic_irq
drivers/usb/misc/uss720.c, 116:
parport_generic_irq in async_complete
Note that [FUNC_PTR] means a function pointer call is used.
To fix these bugs, GFP_KERNEL is replaced with GFP_ATOMIC.
These bugs are found by my static analysis tool DSAC.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
i_usX2Y_subs_startup in usbusx2yaudio.c is a completion handler function
for the USB driver. So it should not sleep, but it is can sleep
according to the function call paths (from bottom to top) in Linux-4.16.
[FUNC] msleep
drivers/usb/host/u132-hcd.c, 2558:
msleep in u132_get_frame
drivers/usb/core/hcd.c, 2231:
[FUNC_PTR]u132_get_frame in usb_hcd_get_frame_number
drivers/usb/core/usb.c, 822:
usb_hcd_get_frame_number in usb_get_current_frame_number
sound/usb/usx2y/usbusx2yaudio.c, 303:
usb_get_current_frame_number in i_usX2Y_urb_complete
sound/usb/usx2y/usbusx2yaudio.c, 366:
i_usX2Y_urb_complete in i_usX2Y_subs_startup
Note that [FUNC_PTR] means a function pointer call is used.
To fix this bug, msleep() is replaced with mdelay().
This bug is found by my static analysis tool DSAC.
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The steps taken by usb core to set a new interface is very different from
what is done on the xHC host side.
xHC hardware will do everything in one go. One command is used to set up
new endpoints, free old endpoints, check bandwidth, and run the new
endpoints.
All this is done by xHC when usb core asks the hcd to check for
available bandwidth. At this point usb core has not yet flushed the old
endpoints, which will cause use-after-free issues in xhci driver as
queued URBs are cancelled on a re-allocated endpoint.
To resolve this add a call to usb_disable_interface() which will flush
the endpoints before calling usb_hcd_alloc_bandwidth()
Additional checks in xhci driver will also be implemented to gracefully
handle stale URB cancel on freed and re-allocated endpoints
Cc: <stable@vger.kernel.org>
Reported-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix kernel-doc warning for missing struct member description:
../include/linux/mod_devicetable.h:763: warning: Function parameter or member 'driver_data' not described in 'typec_device_id'
Fixes: 8a37d87d72 ("usb: typec: Bus type for alternate modes")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix kernel-doc warning for missing function parameter 'mode' description:
../drivers/usb/typec/bus.c:268: warning: Function parameter or member 'mode' not described in 'typec_match_altmode'
Also fix typos for same function documentation.
Fixes: 8a37d87d72 ("usb: typec: Bus type for alternate modes")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb_hc_died() should only be called once, and with the primary HCD
as parameter. It will mark both primary and secondary hcd's dead.
Remove the extra call to usb_cd_died with the shared hcd as parameter.
Fixes: ff9d78b36f ("USB: Set usb_hcd->state and flags for shared roothubs")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Since I'm leaving from Socionext, I'll unable to access specification
documents of this hardware (these are not public). So change the
state to orphan until someone will maintain this driver.
Signed-off-by: Katsuhiro Suzuki <suzuki.katsuhiro@socionext.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
When interrupted, wait_event_interruptible_timeout() returns
-ERESTARTSYS, and the SPI transfer in progress will fail, as expected:
m25p80 spi0.0: SPI transfer failed: -512
spi_master spi0: failed to transfer one message from queue
However, as the underlying DMA transfers may not have completed, all
subsequent SPI transfers may start to fail:
spi_master spi0: receive timeout
qspi_transfer_out_in() returned -110
m25p80 spi0.0: SPI transfer failed: -110
spi_master spi0: failed to transfer one message from queue
Fix this by calling dmaengine_terminate_all() not only for timeouts, but
also for errors.
This can be reproduced on r8a7991/koelsch, using "hd /dev/mtd0" followed
by CTRL-C.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
If the SPI queue is running during system suspend, the system may lock
up.
Fix this by stopping/restarting the queue during system suspend/resume,
by calling spi_master_suspend()/spi_master_resume() from the PM
callbacks. In-kernel users will receive an -ESHUTDOWN error while
system suspend/resume is in progress.
Based on a patch for sh-msiof by Gaku Inami.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
This patch changes writing to the SISTR register according to the H/W
user's manual.
The TDREQ bit and RDREQ bits of SISTR are read-only, and must be written
their initial values of zero.
Signed-off-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com>
[geert: reword]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
If the SPI queue is running during system suspend, the system may lock
up.
Fix this by stopping/restarting the queue during system suspend/resume
by calling spi_master_suspend()/spi_master_resume() from the PM
callbacks. In-kernel users will receive an -ESHUTDOWN error while
system suspend/resume is in progress.
Signed-off-by: Gaku Inami <gaku.inami.xw@bp.renesas.com>
Signed-off-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com>
[geert: Cleanup, reword]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
spi_controller_{suspend,resume}() already prints an error message on
failure, so there is no need to repeat this in individual drivers.
Note: spi_master_{suspend,resume}() is an alias for
spi_controller_{suspend,resume}().
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Reviewed-by: Daniel Mack <daniel@zonque.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
If dual role mode is enabled, when switch u3port0 to device mode,
it will affect port id calculation of host(xHCI), specially when
host supports multi U2 ports or U3 ports, so need enable its dual
role mode, and fix it here.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The hope that UAS devices would be less broken than old style storage
devices has turned out to be unfounded. Make UAS support more of the
quirk flags of the old driver.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This device does not correctly handle the LPM operations.
Also, the device cannot handle ATA pass-through commands
and locks up when attempted while running in super speed.
This patch adds the equivalent quirk logic as found in uas.
Signed-off-by: Tim Anderson <tsa@biglakesoftware.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
