If kmemleak built in to the kernel, but is disabled by default, the
debugfs file is never registered. Because of this, it is not possible
to find out if the kernel is built with kmemleak support by checking for
the presence of this file. To allow this, always register the file.
After this patch, if the file doesn't exist, kmemleak is not available
in the kernel. If writing "scan" or any other value than "clear" to
this file results in EBUSY, then kmemleak is available but is disabled
by default and can be activated via the kernel command line.
Catalin: "that's also consistent with a late disabling of kmemleak when
the debugfs entry sticks around."
Link: http://lkml.kernel.org/r/20180824131220.19176-1-vincent.whitchurch@axis.com
Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit d70f2a14b7 ("include/linux/sched/mm.h: uninline mmdrop_async(),
etc") ignored the return value of arch_dup_mmap(). As a result, on x86,
a failure to duplicate the LDT (e.g. due to memory allocation error)
would leave the duplicated memory mapping in an inconsistent state.
Fix by using the return value, as it was before the change.
Link: http://lkml.kernel.org/r/20180823051229.211856-1-namit@vmware.com
Fixes: d70f2a14b7 ("include/linux/sched/mm.h: uninline mmdrop_async(), etc")
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 93065ac753 ("mm, oom: distinguish blockable mode for mmu
notifiers") has added an ability to skip over vmas with blockable mmu
notifiers. This however didn't call tlb_finish_mmu as it should.
As a result inc_tlb_flush_pending has been called without its pairing
dec_tlb_flush_pending and all callers mm_tlb_flush_pending would flush
even though this is not really needed. This alone is not harmful and it
seems there shouldn't be any such callers for oom victims at all but
there is no real reason to skip tlb_finish_mmu on early skip either so
call it.
[mhocko@suse.com: new changelog]
Link: http://lkml.kernel.org/r/b752d1d5-81ad-7a35-2394-7870641be51c@i-love.sakura.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When the memcg OOM killer runs out of killable tasks, it currently
prints a WARN with no further OOM context. This has caused some user
confusion.
Warnings indicate a kernel problem. In a reported case, however, the
situation was triggered by a nonsensical memcg configuration (hard limit
set to 0). But without any VM context this wasn't obvious from the
report, and it took some back and forth on the mailing list to identify
what is actually a trivial issue.
Handle this OOM condition like we handle it in the global OOM killer:
dump the full OOM context and tell the user we ran out of tasks.
This way the user can identify misconfigurations easily by themselves
and rectify the problem - without having to go through the hassle of
running into an obscure but unsettling warning, finding the appropriate
kernel mailing list and waiting for a kernel developer to remote-analyze
that the memcg configuration caused this.
If users cannot make sense of why the OOM killer was triggered or why it
failed, they will still report it to the mailing list, we know that from
experience. So in case there is an actual kernel bug causing this,
kernel developers will very likely hear about it.
Link: http://lkml.kernel.org/r/20180821160406.22578-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the current code, the TX affinity is per RoCE device, which can cause
unfairness between different contexts. e.g. if we open two contexts, and
each open 10 QPs concurrently, all of the QPs of the first context might
end up on the first port instead of distributed on the two ports as
expected
To overcome this unfairness between processes, we maintain per device TX
affinity, and per process TX affinity.
The allocation algorithm is as follow:
1. Hold two tx_port_affinity atomic variables, one per RoCE device and one
per ucontext. Both initialized to 0.
2. In mlx5_ib_alloc_ucontext do:
2.1. ucontext.tx_port_affinity = device.tx_port_affinity
2.2. device.tx_port_affinity += 1
3. In modify QP INIT2RST:
3.1. qp.tx_port_affinity = ucontext.tx_port_affinity % MLX5_PORT_NUM
3.2. ucontext.tx_port_affinity += 1
Signed-off-by: Majd Dibbiny <majd@mellanox.com>
Reviewed-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
commit 901ef845fa ("selinux: allow per-file labeling for cgroupfs")
broke mounting of cgroup2 under older SELinux policies which lacked
a genfscon rule for cgroup2. This prevents mounting of cgroup2 even
when SELinux is permissive.
Change the handling when there is no genfscon rule in policy to
just mark the inode unlabeled and not return an error to the caller.
This permits mounting and access if allowed by policy, e.g. to
unconfined domains.
I also considered changing the behavior of security_genfs_sid() to
never return -ENOENT, but the current behavior is relied upon by
other callers to perform caller-specific handling.
Fixes: 901ef845fa ("selinux: allow per-file labeling for cgroupfs")
CC: <stable@vger.kernel.org>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: Waiman Long <longman@redhat.com>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Tested-by: Waiman Long <longman@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
void *entry[];
};
instance = devm_kzalloc(dev, sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = devm_kzalloc(dev, struct_size(instance, entry, count), GFP_KERNEL);
This issue was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
One of the more common cases of allocation size calculations is finding
the size of a structure that has a zero-sized array at the end, along
with memory for some number of elements for that array. For example:
struct foo {
int stuff;
void *entry[];
};
instance = devm_kzalloc(dev, sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL);
Instead of leaving these open-coded and prone to type mistakes, we can
now use the new struct_size() helper:
instance = devm_kzalloc(dev, struct_size(instance, entry, count), GFP_KERNEL);
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
In preparation to remove the node name pointer from struct device_node,
convert printf users to use the %pOFn format specifier.
Cc: Boris Brezillon <boris.brezillon@bootlin.com>
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Brian Norris <computersforpeace@gmail.com>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: linux-mtd@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
A recent commit removed the incorrect use of phys_to_dma from this
driver, but failed to remove the dma-direct.h include, so do that
now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Use SPDX-License-Identifier instead of the license boilerplates.
This conversion makes it easier for us to scan the license, then
I notice license mismatch problems.
The license blocks in denali* indicate GPL-2.0 "only", while the
MODULE_LICENSE in denali.c and denali_dt.c is GPL-2.0 "or later"
as explained in include/linux/module.h as follows:
"GPL" [GNU Public License v2 or later]
"GPL v2" [GNU Public License v2]
I fixed the MODULE_LICENSE tags, assuming the license blocks are
the authors' intention.
Also, add missing MODULE_DESCRIPTION/AUTHOR to denali.c
While I am touching the license things, I added my credit to denali.c
because this driver was largely re-written by me in 2017.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Newer versions of the IFC controller use a different method of initializing the
internal SRAM: Instead of reading from flash, a bit in the NAND configuration
register has to be set in order to trigger the self-initializing process.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The SRAM initialization might fail. If that happens further NAND operations
won't be successful. Therefore, the chip init routine should fail if the SRAM
initialization didn't work.
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
It is preferred to have the documentation about the drivers directly
embedded in the driver itself. Remove this file now that the most
important information from this file have been re-written in
marvell_nand.c.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Acked-by: Boris Brezillon <boris.brezillon@bootlin.com>
Acked-by: Ezequiel Garcia <ezequiel@collabora.com>
A stale document about the old pxa3cc_nand.c driver is available in
Documentation/mtd/nand/. Rewrite the parts that explain the IP itself
and some non-trivial choices made in the driver directly in
marvell_nand.c to then be able to remove this file.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
This patch is a patch to support TOSHIBA MEMORY CORPORATION BENAND
memory devices. Check the status of the built-in ECC with the Read
Status command without using the vendor specific command. The Read
Status command only knows whether there was bitflips above the
threshold and can not get accurate bitflips. For now, I set
max_bitflips mtd->bitflip_threshold.
Signed-off-by: KOBAYASHI Yoshitake <yoshitake.kobayashi@toshiba.co.jp>
Reviewed-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
The marvell_nfc_init() function fiddles with some bits of a system
controller on Armada 7K/8K. However, it does a read/modify/write
sequence on GENCONF_CLK_GATING_CTRL and GENCONF_ND_CLK_CTRL, which
isn't safe from a concurrency point of view, as the regmap lock isn't
taken accross the read/modify/write sequence. To solve this issue, use
regmap_update_bits().
While at it, since the "reg" variable is no longer needed for the
read/modify/write sequences, get rid of it for the regmap_write() to
GENCONF_SOC_DEVICE_MUX, and directly pass the value to be written as
argument.
Fixes: 02f26ecf8c ("mtd: nand: add reworked Marvell NAND controller driver")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Once the qp has been flushed, it cannot be flushed again. The user qp
flush logic wasn't enforcing it however. The bug can cause
touch-after-free crashes like:
Unable to handle kernel paging request for data at address 0x000001ec
Faulting instruction address: 0xc008000016069100
Oops: Kernel access of bad area, sig: 11 [#1]
...
NIP [c008000016069100] flush_qp+0x80/0x480 [iw_cxgb4]
LR [c00800001606cd6c] c4iw_modify_qp+0x71c/0x11d0 [iw_cxgb4]
Call Trace:
[c00800001606cd6c] c4iw_modify_qp+0x71c/0x11d0 [iw_cxgb4]
[c00800001606e868] c4iw_ib_modify_qp+0x118/0x200 [iw_cxgb4]
[c0080000119eae80] ib_security_modify_qp+0xd0/0x3d0 [ib_core]
[c0080000119c4e24] ib_modify_qp+0xc4/0x2c0 [ib_core]
[c008000011df0284] iwcm_modify_qp_err+0x44/0x70 [iw_cm]
[c008000011df0fec] destroy_cm_id+0xcc/0x370 [iw_cm]
[c008000011ed4358] rdma_destroy_id+0x3c8/0x520 [rdma_cm]
[c0080000134b0540] ucma_close+0x90/0x1b0 [rdma_ucm]
[c000000000444da4] __fput+0xe4/0x2f0
So fix flush_qp() to only flush the wq once.
Cc: stable@vger.kernel.org
Signed-off-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The object lock was supposed to always be released during destroy, but
when the destruction retry series was integrated with the destroy series
it created a failure path that missed the unlock.
Keep with convention, if destroy fails the caller must undo all locking.
Fixes: 87ad80abc7 ("IB/uverbs: Consolidate uobject destruction")
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The current code grabs the private_data of whatever file descriptor
userspace has supplied and implicitly casts it to a `struct ucma_file *`,
potentially causing a type confusion.
This is probably fine in practice because the pointer is only used for
comparisons, it is never actually dereferenced; and even in the
comparisons, it is unlikely that a file from another filesystem would have
a ->private_data pointer that happens to also be valid in this context.
But ->private_data is not always guaranteed to be a valid pointer to an
object owned by the file's filesystem; for example, some filesystems just
cram numbers in there.
Check the type of the supplied file descriptor to be safe, analogous to how
other places in the kernel do it.
Fixes: 88314e4dda ("RDMA/cma: add support for rdma_migrate_id()")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The clock controller registers are not 0x460 wide because the reset
controller starts at CBUS 0x4404. This currently overlaps with the
clock controller (which is at CBUS 0x4000).
There is no public documentation available on the actual size of the
clock controller's register area (also called "HHI"). However, in
Amlogic's GPL kernel sources the last "HHI" register is
HHI_HDMI_PHY_CNTL2 at CBUS + 0x43a8. 0x400 was chosen because that size
doesn't seem unlikely.
Fixes: 4a69fcd3a1 ("ARM: meson: Add DTS for Odroid-C1 and Tronfy MXQ boards")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The clock controller registers are not 0x460 wide because the reset
controller starts at CBUS 0x4404. This currently overlaps with the
clock controller (which is at CBUS 0x4000).
There is no public documentation available on the actual size of the
clock controller's register area (also called "HHI"). However, in
Amlogic's GPL kernel sources the last "HHI" register is
HHI_HDMI_PHY_CNTL2 at CBUS + 0x43a8. 0x400 was chosen because that size
doesn't seem unlikely.
Fixes: 2c323c43a3 ("ARM: dts: meson8: add and use the real clock controller")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Commit c120e75e0e ("mtd: nand: use read_oob() instead of cmdfunc()
for bad block check") removed this only user of the ->read_word()
method but kept the hook in place. Remove it now.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
In order to make sure we use ->exec_op() to wait for chip readiness
when it's available we provide an helper that does the selection
between ->exec_op(), udelay(chip->chip_delay) and nand_wait_ready()
based on what's implemented by the controller driver.
We then use it in nand_wait_readrdy().
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Now that the application is simply stored in struct hid_input, we can
overwrite it in mt_input_mapping() for the faulty egalax and have a
simpler suffix processing in mt_input_configured()
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The logic to wait for chip readiness after a page read has been
duplicated in nand_do_read_ops() and nand_do_read_oob(). Provide an
helper that does the right thing and call it where appropriate.
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
If the previous modeset commit has completed and is no longer part of
the crtc state, skip waiting for it.
Ville pointed out that, in fact, the commit is never removed after a
modeset so the only way we could see a NULL here should be if there was
never a commit attached. Nevertheless, we have the evidence it can be
NULL and it has been defended against elsewhere, for example commit
93313538c1 ("drm/i915: Pass idle crtc_state to intel_dp_sink_crc").
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107792
Fixes: c44301fce6 ("drm/i915: Allow control of PSR at runtime through debugfs, v6")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180904162902.2578-1-chris@chris-wilson.co.uk
__GFP_HIGHMEM flag is cleared by upper layer functions
(in include/linux/dma-mapping.h) so we'll never get a
__GFP_HIGHMEM flag in arch_dma_alloc gfp argument.
That's why alloc_pages will never return highmem page
here.
Get rid of highmem pages handling and cleanup arch_dma_alloc
and arch_dma_free functions.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
So far the IOC treatment was global on ARC, being turned on (or off)
for all devices in the system. With this patch, this can now be done
per device using the "dma-coherent" DT property; IOW with this patch
we can use both HW-coherent and regular DMA peripherals simultaneously.
The changes involved are too many so enlisting the summary below:
1. common code calls ARC arch_setup_dma_ops() per device.
2. For coherent dma (IOC) it plugs in generic @dma_direct_ops which
doesn't need any arch specific backend: No need for any explicit
cache flushes or MMU mappings to provide for uncached access
- dma_(map|sync)_single* return early as corresponding dma ops callbacks
are NULL in generic code.
So arch_sync_dma_*() -> dma_cache_*() need not handle the coherent
dma case, hence drop ARC __dma_cache_*_ioc() which were no-op anyways
3. For noncoherent dma (non IOC) generic @dma_noncoherent_ops is used
which in turns calls ARC specific routines
- arch_dma_alloc() no longer checks for @ioc_enable since this is
called only for !IOC case.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[vgupta: rewrote changelog]
Annoying when using it with --stdio/--stdio2, so just turn them debug,
we can get those using -v.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-t3684lkugnf1w4lwcmpj9ivm@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Without using something to augment the raw_syscalls:sys_enter tracepoint
payload with the pointer contents, this will work just like before, i.e.
the augmented_args arg will be NULL and the augmented_args_size will be
0.
This just paves the way for the next cset where we will associate the
trace__sys_enter tracepoint handler with the augmented "bpf-output"
event named "__augmented_args__".
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-p8uvt2a6ug3uwlhja3cno4la@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull networking fixes from David Miller:
1) Must perform TXQ teardown before unregistering interfaces in
mac80211, from Toke Høiland-Jørgensen.
2) Don't allow creating mac80211_hwsim with less than one channel, from
Johannes Berg.
3) Division by zero in cfg80211, fix from Johannes Berg.
4) Fix endian issue in tipc, from Haiqing Bai.
5) BPF sockmap use-after-free fixes from Daniel Borkmann.
6) Spectre-v1 in mac80211_hwsim, from Jinbum Park.
7) Missing rhashtable_walk_exit() in tipc, from Cong Wang.
8) Revert kvzalloc() conversion of AF_PACKET, it breaks mmap() when
kvzalloc() tries to use kmalloc() pages. From Eric Dumazet.
9) Fix deadlock in hv_netvsc, from Dexuan Cui.
10) Do not restart timewait timer on RST, from Florian Westphal.
11) Fix double lwstate refcount grab in ipv6, from Alexey Kodanev.
12) Unsolicit report count handling is off-by-one, fix from Hangbin Liu.
13) Sleep-in-atomic in cadence driver, from Jia-Ju Bai.
14) Respect ttl-inherit in ip6 tunnel driver, from Hangbin Liu.
15) Use-after-free in act_ife, fix from Cong Wang.
16) Missing hold to meta module in act_ife, from Vlad Buslov.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (91 commits)
net: phy: sfp: Handle unimplemented hwmon limits and alarms
net: sched: action_ife: take reference to meta module
act_ife: fix a potential use-after-free
net/mlx5: Fix SQ offset in QPs with small RQ
tipc: correct spelling errors for tipc_topsrv_queue_evt() comments
tipc: correct spelling errors for struct tipc_bc_base's comment
bnxt_en: Do not adjust max_cp_rings by the ones used by RDMA.
bnxt_en: Clean up unused functions.
bnxt_en: Fix firmware signaled resource change logic in open.
sctp: not traverse asoc trans list if non-ipv6 trans exists for ipv6_flowlabel
sctp: fix invalid reference to the index variable of the iterator
net/ibm/emac: wrong emac_calc_base call was used by typo
net: sched: null actions array pointer before releasing action
vhost: fix VHOST_GET_BACKEND_FEATURES ioctl request definition
r8169: add support for NCube 8168 network card
ip6_tunnel: respect ttl inherit for ip6tnl
mac80211: shorten the IBSS debug messages
mac80211: don't Tx a deauth frame if the AP forbade Tx
mac80211: Fix station bandwidth setting after channel switch
mac80211: fix a race between restart and CSA flows
...
Or it creates some weird input names like:
"MI Dongle MI Wireless Mouse Mouse"
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
When implementing commit 7f81c8db54 ("HID: multitouch: simplify
the settings of the various features"), I wrongly removed a test
that made sure we never try to set the second InputMode feature
to something else than 0.
This broke badly some recent Elan panels that now forget to send the
click button in some area of the touchpad.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=200899
Fixes: 7f81c8db54 ("HID: multitouch: simplify the settings of the various features")
Cc: stable@vger.kernel.org # v4.18+
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Not all SFPs implement the registers containing sensor limits and
alarms. Luckily, there is a bit indicating if they are implemented or
not. Add checking for this bit, when deciding if the hwmon attributes
should be visible.
Fixes: 1323061a01 ("net: phy: sfp: Add HWMON support for module sensors")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 1077614 ("Missing break in switch")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Immediately after module_put(), user could delete this
module, so e->ops could be already freed before we call
e->ops->release().
Fix this by moving module_put() after ops->release().
Fixes: ef6980b6be ("introduce IFE action")
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Correct the formula for calculating the RQ page remainder,
which should be in byte granularity. The result will be
non-zero only for RQs smaller than PAGE_SIZE, as an RQ size
is a power of 2.
Divide this by the SQ stride (MLX5_SEND_WQE_BB) to get the
SQ offset in strides granularity.
Fixes: d7037ad73d ("net/mlx5: Fix QP fragmented buffer allocation")
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Two small fixes for KVM on POWER machines; one fixes a bug where pages
might not get marked dirty, causing guest memory corruption on migration,
and the other fixes a bug causing reads from guest memory to use the
wrong guest real address for very large HPT guests (>256G of memory),
leading to failures in instruction emulation.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJbfVFcAAoJEJ2a6ncsY3GfwAcH/i4BDNm5bSXLbCZv1Zqc9iWM
ZqCNSlx9fuR5z+Bl3FWvm14CqfG7JFMd1pVXVD3AEGN6nv0mtLPotmoaw+BUWXIP
aD3BRIBSfOVHj90CiWJ1pqZGzE49vAKrjUGocuqHhBiqGjYmnnE7QKgD+lQ13SND
LWDV3XaQgoO9+NZdqtV6hsWMmKCmXWIHykkG9H+EVkD+341e2EBQf6r83qibAGz4
U5SHkr/3JqL8oC7RJixT8CS/dV5qCgmuL8Vs5NYDTUnc6DmKhdes2s7OiugK7nHg
twKe8K0aRVowmTA8yIwEN22OeH1FAUmYDClkgHozHFWyD2+u7O9kLrAYZxEN9Q4=
=61nR
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-fixes-4.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc
PPC KVM fixes for 4.19
Two small fixes for KVM on POWER machines; one fixes a bug where pages
might not get marked dirty, causing guest memory corruption on migration,
and the other fixes a bug causing reads from guest memory to use the
wrong guest real address for very large HPT guests (>256G of memory),
leading to failures in instruction emulation.
simple_strtoul is obsolete, and use kstrtouint instead
Signed-off-by: Ding Xiang <dingxiang@cmss.chinamobile.com>
Acked-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: James Morris <james.morris@microsoft.com>
Using a spinlock to serialize the destroy function, within the destroy
function itself does not prevent the buggy driver from shooting
themselves in the foot - either way they still have a use-after-free
issue.
Reported-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Liviu Dudau <Liviu.Dudau@arm.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180903093155.3825-1-chris@chris-wilson.co.uk
The ioctl arguments are under control of the user and as such we should
resist any temptation to flood the kernel logs with their errors.
Relegate the DRM_ERROR to a DRM_DEBUG so the user has to opt into
hearing of their own mistakes. (One day we will have a small ringbuffer
attached to the task, so that the concerned process can inspect its own
debug info for EINVAL without them being hitting syslog at all.)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20180904115719.24525-1-chris@chris-wilson.co.uk
syzbot reports a divide-by-zero off the NBD_SET_BLKSIZE ioctl.
We need proper validation of the input here. Not just if it's
zero, but also if the value is a power-of-2 and in a valid
range. Add that.
Cc: stable@vger.kernel.org
Reported-by: syzbot <syzbot+25dbecbec1e62c6b0dd4@syzkaller.appspotmail.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
VSC8584 supports 4 LEDs while VSC8531 only supports 2. Let's factorize
the documentation for LED mode properties and give the 4 default values
(the first two being shared between VSC8531 and VSC8584).
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Quentin Schulz <quentin.schulz@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
