Commit graph

798,688 commits

Author SHA1 Message Date
Jeykumar Sankaran
25fdd5933e drm/msm: Add SDM845 DPU support
SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a
top level wrapper consisting of Display Processing Unit (DPU) and
display peripheral modules such as Display Serial Interface (DSI)
and DisplayPort (DP).

MDSS functions essentially as a back-end composition engine. It blends
video and graphic images stored in the frame buffers and scans out the
composed image to a display sink (over DSI/DP).

The following diagram represents hardware blocks for a simple pipeline
(two planes are present on a given crtc which is connected to a DSI
connector):

       MDSS
      +---------------------------------+
      | +-----------------------------+ |
      | | DPU                         | |
      | |  +--------+  +--------+     | |
      | |  |  SSPP  |  |  SSPP  |     | |
      | |  +----+---+  +----+---+     | |
      | |       |           |         | |
      | |  +----v-----------v---+     | |
      | |  |  Layer Mixer (LM)  |     | |
      | |  +--------------------+     | |
      | |  +--------------------+     | |
      | |  |    PingPong (PP)   |     | |
      | |  +--------------------+     | |
      | |  +--------------------+     | |
      | |  |  INTERFACE (VIDEO) |     | |
      | |  +---+----------------+     | |
      | +------|----------------------+ |
      |        |                        |
      | +------|---------------------+  |
      | |      | DISPLAY PERIPHERALS |  |
      | |  +---v-+      +-----+      |  |
      | |  | DSI |      |  DP |      |  |
      | |  +-----+      +-----+      |  |
      | +----------------------------+  |
      +---------------------------------+

The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs)
depends on SoC capabilities.

Overview of DPU sub-blocks:
---------------------------
* Source Surface Processor (SSPP):
 Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are
 capable of performing format conversion, scaling and quality improvement
 for source surfaces.

* Layer Mixer (LM):
 Blend source surfaces together (in requested zorder)

* PingPong (PP):
 This block controls frame done interrupt output, EOL and EOF generation,
 overflow/underflow control.

* Display interface (INTF):
 Timing generator and interface connecting the display peripherals.

DRM components mapping to DPU architecture:
------------------------------------------
PLANEs maps to SSPPs
CRTC maps to LMs
Encoder maps to PPs, INTFs

Data flow setup:
---------------
MDSS hardware can support various data flows (e.g.):
  - Dual pipe: Output from two LMs combined to single display.
  - Split display: Output from two LMs connected to two separate
                   interfaces.

The hardware capabilities determine the number of concurrent data paths
possible. Any control path (i.e. pipeline w/i DPU) can be routed to any
of the hardware data paths. A given control path can be triggered,
flushed and controlled independently.

Changes in v3:
- Move msm_media_info.h from uapi to dpu/ subdir
- Remove preclose callback dpu (it's handled in core)
- Fix kbuild warnings with parent_ops
- Remove unused functions from dpu_core_irq
- Rename mdss_phys to mdss
- Rename mdp_phys address space to mdp
- Drop _phys from vbif and regdma binding names

Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
[robclark minor rebase]
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:45:04 -04:00
Tiago Brusamarello
516ddd7906
spi: spi-fsl-espi: Log fifo counters on error
Log RX and TX fifo counters when a transfer is done and these are not
zero.

Signed-off-by: Tiago Brusamarello <tiago.brusamarello@datacom.ind.br>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-26 15:43:09 +01:00
Jeykumar Sankaran
036bfeb33b drm/msm: Add pm_suspend/resume callbacks to msm_kms
Used by the dpu driver for custom suspend/resume.

Changes in v3:
- None

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
[seanpaul split this out of the megapatch]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:40:16 -04:00
Jeykumar Sankaran
2b7ac1a898 drm/msm: Add .commit() callback to msm_kms functions
Called right before wait_for_commit_done() to perform kickoff for
active crtcs.

Changes in v3:
- None

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
[seanpaul split this out of the megapatch]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:40:16 -04:00
Jeykumar Sankaran
7305a0ceec drm/msm: #define MAX_<OBJECT> in msm_drv.h
dpu uses these elsewhere in the driver (in addition to increasing
MAX_PLANES, that'll come later), so pull them out into #define.

Changes in v3:
- None

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
[seanpaul pulled this out of the dpu megapatch]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:40:16 -04:00
Jeykumar Sankaran
77050c3feb drm/msm: Use labels for unwinding in the error path
This simplifies cleanup, to make sure nothing drops out in case of
error.

Changes in v3:
- None

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
[seanpaul split out of dpu megapatch and renamed labels]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:40:16 -04:00
Jeykumar Sankaran
aaded2e3a1 drm/msm: #define MDP version numbers
Useful for incoming DPU support

Changes in v3:
- None

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
[seanpaul split this from the dpu megapatch]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:40:16 -04:00
Sean Paul
74312fc734 drm/msm: Clean up dangling atomic_wq
I missed this during the atomic conversion

Changes in v3:
- None

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:40:15 -04:00
Abhinav Kumar
2d0b10fc51 drm/msm: higher values of pclk can exceed 32 bits when multiplied by a factor
Make the pclk_rate u64 to accommodate higher pixel clock
rates.

Changes in v3:
- Converted pclk_rate to u32 (Archit)
- Rebase on dsi cleanup set in msm-next

Cc: Sibi Sankar <sibis@codeaurora.org>
Cc: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:40:15 -04:00
Jeykumar Sankaran
bb676df12b drm/msm: enable zpos normalization
Enable drm core zpos normalization for planes.

Changes in v3:
- None

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:40:15 -04:00
Rajesh Yadav
bc3220be22 drm/msm/mdp5: subclass msm_mdss for mdp5
SoCs having mdp5 or dpu have identical tree like
device hierarchy where MDSS top level wrapper manages
common power resources for all child devices.

Subclass msm_mdss so that msm_mdss includes common defines
and mdp5/dpu mdss derivations to include any extensions.

Add mdss helper interface (msm_mdss_funcs) to msm_mdss
base for mdp5/dpu mdss specific implementation calls.

This change subclasses msm_mdss for mdp5, dpu specific
changes will be done separately.

Changes in v3:
- Added Archit's R-b

Reviewed-by: Archit Taneja <architt@codeaurora.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
[seanpaul rebased on msm-next and resolved conflicts]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:40:15 -04:00
Sean Paul
a5c6b59904 drm/msm: Move wait_for_vblanks into mdp complete_commit() hooks
DPU doesn't use this, so push it into the mdp drivers.

Changes in v3:
- None

Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:40:15 -04:00
Abhinav Kumar
425a2d24d5 drm/msm/dsi: set encoder mode for DRM bridge explicitly
Currently, DRM bridge for DPU relies on the default video
mode setting to set the encoder mode.

Add an explicit call to set the encoder mode for bridges.

Changes in v3:
- None

Reviewed-by: Archit Taneja <architt@codeauorora.org>
Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:40:14 -04:00
Rajesh Yadav
7a296796fd drm/msm/dsi: initialize postdiv_lock before use for 10nm pll
postdiv_lock spinlock was used before initialization
for 10nm pll. It causes following spin_bug:
	"BUG: spinlock bad magic on CPU#0".
Initialize spinlock before its usage.

Changes in v3:
- Added Archit's R-b

Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:40:14 -04:00
Chandan Uddaraju
8b03ad30e3 drm/msm/dsi: Use one connector for dual DSI mode
Current DSI driver uses two connectors for dual DSI case even
though we only have one panel. Fix this by implementing one
connector/bridge for dual DSI use case. Use master DSI
controllers to register one connector/bridge.

Changes in v3:
- None

Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
[seanpaul removed unused local var causing a build warning]
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:40:14 -04:00
Chandan Uddaraju
ed9976a09b drm/msm/dsi: adjust dsi timing for dual dsi mode
For dual dsi mode, the horizontal timing needs
to be divided by half since both the dsi controllers
will be driving this panel. Adjust the pixel clock and
DSI timing accordingly.

Changes in v3:
- Added Archit's R-b
- Rebase on dsi cleanup set in msm-next

Cc: Sibi Sankar <sibis@codeaurora.org>
Reviewed-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:40:14 -04:00
Jeykumar Sankaran
2a8536f6e8 drm: add msm compressed format modifiers
Qualcomm Snapdragon chipsets uses compressed format
to optimize BW across multiple IP's. This change adds
needed modifier support in drm for a simple 4x4 tile
based compressed variants of base formats.

Changes in v3:
- Removed duplicate entry for DRM_FORMAT_MOD_QCOM_COMPRESSED (Rob Clark)
Changes in v4:
- Remove all modifiers aside from COMPRESSED, this includes tiled and
  10-bit

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
2018-07-26 10:39:21 -04:00
Andrey Ryabinin
9635453572 fuse: reduce allocation size for splice_write
The 'bufs' array contains 'pipe->buffers' elements, but the
fuse_dev_splice_write() uses only 'pipe->nrbufs' elements.

So reduce the allocation size to 'pipe->nrbufs' elements.

Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-26 16:13:12 +02:00
Andrey Ryabinin
d6d931adce fuse: use kvmalloc to allocate array of pipe_buffer structs.
The amount of pipe->buffers is basically controlled by userspace by
fcntl(... F_SETPIPE_SZ ...) so it could be large. High order allocations
could be slow (if memory is heavily fragmented) or may fail if the order
is larger than PAGE_ALLOC_COSTLY_ORDER.

Since the 'bufs' doesn't need to be physically contiguous, use
the kvmalloc_array() to allocate memory. If high order
page isn't available, the kvamalloc*() will fallback to 0-order.

Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-26 16:13:12 +02:00
Arnd Bergmann
a64ba10f65 fuse: convert last timespec use to timespec64
All of fuse uses 64-bit timestamps with the exception of the
fuse_change_attributes(), so let's convert this one as well.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-26 16:13:12 +02:00
Souptick Joarder
46fb504a71 fs: fuse: Adding new return type vm_fault_t
Use new return type vm_fault_t for fault handler in struct
vm_operations_struct.  For now, this is just documenting that the function
returns a VM_FAULT value rather than an errno.  Once all instances are
converted, vm_fault_t will become a distinct type.

commit 1c8f422059 ("mm: change return type to vm_fault_t")

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-26 16:13:12 +02:00
Miklos Szeredi
75f3ee4c28 fuse: simplify fuse_abort_conn()
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-26 16:13:12 +02:00
Kirill Tkhai
109728ccc5 fuse: Add missed unlock_page() to fuse_readpages_fill()
The above error path returns with page unlocked, so this place seems also
to behave the same.

Fixes: f8dbdf8182 ("fuse: rework fuse_readpages()")
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-26 16:13:12 +02:00
Andrey Ryabinin
a2477b0e67 fuse: Don't access pipe->buffers without pipe_lock()
fuse_dev_splice_write() reads pipe->buffers to determine the size of
'bufs' array before taking the pipe_lock(). This is not safe as
another thread might change the 'pipe->buffers' between the allocation
and taking the pipe_lock(). So we end up with too small 'bufs' array.

Move the bufs allocations inside pipe_lock()/pipe_unlock() to fix this.

Fixes: dd3bb14f44 ("fuse: support splice() writing to fuse device")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: <stable@vger.kernel.org> # v2.6.35
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-26 16:13:11 +02:00
Miklos Szeredi
63576c13bd fuse: fix initial parallel dirops
If parallel dirops are enabled in FUSE_INIT reply, then first operation may
leave fi->mutex held.

Reported-by: syzbot <syzbot+3f7b29af1baa9d0a55be@syzkaller.appspotmail.com>
Fixes: 5c672ab3f0 ("fuse: serialize dirops by default")
Cc: <stable@vger.kernel.org> # v4.7
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-26 16:13:11 +02:00
Miklos Szeredi
e8f3bd773d fuse: Fix oops at process_init_reply()
syzbot is hitting NULL pointer dereference at process_init_reply().
This is because deactivate_locked_super() is called before response for
initial request is processed.

Fix this by aborting and waiting for all requests (including FUSE_INIT)
before resetting fc->sb.

Original patch by Tetsuo Handa <penguin-kernel@I-love.SKAURA.ne.jp>.

Reported-by: syzbot <syzbot+b62f08f4d5857755e3bc@syzkaller.appspotmail.com>
Fixes: e27c9d3877 ("fuse: fuse: add time_gran to INIT_OUT")
Cc: <stable@vger.kernel.org> # v3.19
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-26 16:13:11 +02:00
Miklos Szeredi
b8f95e5d13 fuse: umount should wait for all requests
fuse_abort_conn() does not guarantee that all async requests have actually
finished aborting (i.e. their ->end() function is called).  This could
actually result in still used inodes after umount.

Add a helper to wait until all requests are fully done.  This is done by
looking at the "num_waiting" counter.  When this counter drops to zero, we
can be sure that no more requests are outstanding.

Fixes: 0d8e84b043 ("fuse: simplify request abort")
Cc: <stable@vger.kernel.org> # v4.2
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-26 16:13:11 +02:00
Miklos Szeredi
45ff350bbd fuse: fix unlocked access to processing queue
fuse_dev_release() assumes that it's the only one referencing the
fpq->processing list, but that's not true, since fuse_abort_conn() can be
doing the same without any serialization between the two.

Fixes: c3696046be ("fuse: separate pqueue for clones")
Cc: <stable@vger.kernel.org> # v4.2
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-26 16:13:11 +02:00
Miklos Szeredi
87114373ea fuse: fix double request_end()
Refcounting of request is broken when fuse_abort_conn() is called and
request is on the fpq->io list:

 - ref is taken too late
 - then it is not dropped

Fixes: 0d8e84b043 ("fuse: simplify request abort")
Cc: <stable@vger.kernel.org> # v4.2
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-07-26 16:13:11 +02:00
Snild Dolkow
3e536e222f kthread, tracing: Don't expose half-written comm when creating kthreads
There is a window for racing when printing directly to task->comm,
allowing other threads to see a non-terminated string. The vsnprintf
function fills the buffer, counts the truncated chars, then finally
writes the \0 at the end.

	creator                     other
	vsnprintf:
	  fill (not terminated)
	  count the rest            trace_sched_waking(p):
	  ...                         memcpy(comm, p->comm, TASK_COMM_LEN)
	  write \0

The consequences depend on how 'other' uses the string. In our case,
it was copied into the tracing system's saved cmdlines, a buffer of
adjacent TASK_COMM_LEN-byte buffers (note the 'n' where 0 should be):

	crash-arm64> x/1024s savedcmd->saved_cmdlines | grep 'evenk'
	0xffffffd5b3818640:     "irq/497-pwr_evenkworker/u16:12"

...and a strcpy out of there would cause stack corruption:

	[224761.522292] Kernel panic - not syncing: stack-protector:
	    Kernel stack is corrupted in: ffffff9bf9783c78

	crash-arm64> kbt | grep 'comm\|trace_print_context'
	#6  0xffffff9bf9783c78 in trace_print_context+0x18c(+396)
	      comm (char [16]) =  "irq/497-pwr_even"

	crash-arm64> rd 0xffffffd4d0e17d14 8
	ffffffd4d0e17d14:  2f71726900000000 5f7277702d373934   ....irq/497-pwr_
	ffffffd4d0e17d24:  726f776b6e657665 3a3631752f72656b   evenkworker/u16:
	ffffffd4d0e17d34:  f9780248ff003231 cede60e0ffffff9b   12..H.x......`..
	ffffffd4d0e17d44:  cede60c8ffffffd4 00000fffffffffd4   .....`..........

The workaround in e09e28671 (use strlcpy in __trace_find_cmdline) was
likely needed because of this same bug.

Solved by vsnprintf:ing to a local buffer, then using set_task_comm().
This way, there won't be a window where comm is not terminated.

Link: http://lkml.kernel.org/r/20180726071539.188015-1-snild@sony.com

Cc: stable@vger.kernel.org
Fixes: bc0c38d139 ("ftrace: latency tracer infrastructure")
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Snild Dolkow <snild@sony.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2018-07-26 09:59:33 -04:00
Alexandre Belloni
c842697c74 rtc: unexport rtc_irq_set_*
Make the rtc_irq_set interface internale to the RTC subsystem.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-07-26 15:08:53 +02:00
Alexandre Belloni
8719d3c918 rtc: simplify rtc_irq_set_state/rtc_irq_set_freq
The PIE doesn't handle tasks anymore, remove the pointer from the
interface.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-07-26 15:08:53 +02:00
Alexandre Belloni
acecb3ad8b rtc: remove irq_task and irq_task_lock
There is no way to set a periodic task anymore, remove task pointer and
lock.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-07-26 15:08:53 +02:00
Alexandre Belloni
1560d0848a rtc: remove rtc_irq_register/rtc_irq_unregister
The rtc_irq_* interface is not used from outside the RTC subsytem since
2016.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-07-26 15:08:50 +02:00
Alexandre Belloni
ec623ff014 rtc: sh: remove dead code
Since commit 80d4bb515b ("RTC: Cleanup rtc_class_ops->irq_set_state") and
commit 696160fec1 ("RTC: Cleanup rtc_class_ops->irq_set_freq()"),
sh_rtc_irq_set_state and sh_rtc_irq_set_freq are never called. Remove them
along with task handling.

Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2018-07-26 15:08:39 +02:00
Akshu Agrawal
7699676081
ASoC: AMD: Fix build warning
Fixes
sound/soc/amd/acp-da7219-max98357a.c: In function 'cz_probe':
sound/soc/amd/acp-da7219-max98357a.c:367:3: warning: 'ret' may
be used uninitialized in this function [-Wmaybe-uninitialized]
   dev_err(&pdev->dev, "Failed to register regulator: %d\n",
ret);

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-26 14:07:55 +01:00
Akshu Agrawal
c183fec10a
ASoC: AMD: Add a fix voltage regulator for DA7219 and ADAU7002
DA7219 for our platform need to be configured for 1.8V.
Hence, we add a volatge regulator with supplies
of 1.8V in the machine driver.

Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-26 14:07:47 +01:00
Takashi Iwai
d6b340d7cb ALSA: trident: Suppress gcc string warning
The meddlesome gcc warns about the possible shortname string in
trident driver code:
  sound/pci/trident/trident.c: In function ‘snd_trident_probe’:
  sound/pci/trident/trident.c:126:2: warning: ‘strcat’ accessing 17 or more bytes at offsets 36 and 20 may overlap 1 byte at offset 36 [-Wrestrict]
  strcat(card->shortname, card->driver);

It happens since gcc calculates the possible string size from
card->driver, but this can't be true since we did set the string just
before that, and they are much shorter.

For shutting it up, use the exactly same string set to card->driver
for strcat() to card->shortname, too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-26 15:01:37 +02:00
Sean Young
92cab799bb media: bpf: ensure bpf program is freed on detach
Currently we are leaking bpf programs when they are detached from the
lirc device; the refcount never reaches zero.

Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2018-07-26 08:39:18 -04:00
Sudeep Holla
809092dc3e drivers/perf: arm-ccn: Use devm_ioremap_resource() to map memory
Instead of checking the return value of platform_get_resource(), we can
use devm_ioremap_resource() which has the NULL pointer check and the
memory region requesting. devm_ioremap_resource is designed to replace
calls to devm_request_mem_region followed by devm_ioremap, so let's use
the same.

Cc: Will Deacon <will.deacon@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2018-07-26 13:33:49 +01:00
Chris Wilson
6dc17d69f8 drm/i915/selftests: Exercise resetting in the middle of a wait-on-fence
On older HW, gen2/3, fence registers are used for detiling GPU commands
and as such changing those registers requires serialisation with the
requests on the GPU. Anything running on the GPU is subject to a hang,
and so we must be able to recover cleanly in the middle of a stuck wait
on a fence register.

We can simulate using the fence on the GPU simply by marking the fence
as active on the request for this vma, the interface being common to all
gen, thus broadening the test.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719194746.19111-2-chris@chris-wilson.co.uk
2018-07-26 13:32:08 +01:00
Chris Wilson
ab84a11049 drm/i915/selftests: Use a full emulation of a user ppgtt context
To test eviction from a ppgtt, we just want a ppgtt i.e. something other
than the Global GTT which is shared and used by the kernel for HW
features like fencing and scanout. However, we also need it to pass
!i915_is_ggtt() and the simplest way is to emulate a full user context
rather than the internal kernel context that is used for the GGTT.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180719194746.19111-1-chris@chris-wilson.co.uk
2018-07-26 13:32:07 +01:00
Chris Wilson
ec5b65a97c drm/i915: Don't disable the GPU for older gen on wedging
If we issue a device level GPU reset on the older gen, it will disable
key components of the GMCH and the display engine. The purpose of
wedging is to simply prevent further GEM usage without disabling KMS, so
we need to be careful when we do issue the reset on wedging.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180726085033.4044-3-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
2018-07-26 12:53:34 +01:00
Chris Wilson
7ed43df720 drm/i915: Restore sane defaults for KMS on GEM error load
If we fail during GEM initialisation, we scrub the HW state by
performing a device level GPU resuet. However, we want to leave the
system in a usable state (with functioning KMS but no GEM) so after
scrubbing the HW state, we need to restore some sane defaults and
re-enable the low-level common parts of the GPU (such as the GMCH).

v2: Restore GTT entries.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180726085033.4044-2-chris@chris-wilson.co.uk
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
2018-07-26 12:53:28 +01:00
Chris Wilson
52dda80d62 drm/i915: Protect guc_fini_wq() against module load abort
Prevent
[  397.873143] general protection fault: 0000 [#1] PREEMPT SMP PTI
[  397.873154] CPU: 4 PID: 4799 Comm: drv_module_relo Tainted: G     U            4.18.0-rc6-CI-CI_DRM_4534+ #1
[  397.873162] Hardware name: Micro-Star International Co., Ltd. MS-7B54/Z370M MORTAR (MS-7B54), BIOS 1.10 12/28/2017
[  397.873175] RIP: 0010:__lock_acquire+0xf6/0x1b50
[  397.873179] Code: 85 c0 4c 8b 9d 40 ff ff ff 8b 8d 38 ff ff ff 44 8b 8d 30 ff ff ff 4c 8b 85 28 ff ff ff 44 8b 95 24 ff ff ff 0f 84 54 03 00 00 <f0> ff 80 38 01 00 00 8b 15 45 8c 59 02 45 8b bc 24 70 08 00 00 85
[  397.873240] RSP: 0018:ffffc90000497b40 EFLAGS: 00010002
[  397.873246] RAX: 6b6b6b6b6b6b6b6b RBX: 0000000000000001 RCX: 0000000000000000
[  397.873252] RDX: 0000000000000046 RSI: 0000000000000000 RDI: 0000000000000000
[  397.873258] RBP: ffffc90000497c20 R08: ffffffff810a25e9 R09: 0000000000000000
[  397.873264] R10: 0000000000000000 R11: ffff880255c63c28 R12: ffff8801093b2840
[  397.873270] R13: 0000000000000001 R14: 0000000000000001 R15: 0000000000000246
[  397.873277] FS:  00007faf88d71980(0000) GS:ffff880266300000(0000) knlGS:0000000000000000
[  397.873284] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  397.873289] CR2: 000055d866c9ca10 CR3: 000000025472e006 CR4: 00000000003606e0
[  397.873295] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[  397.873301] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[  397.873308] Call Trace:
[  397.873318]  ? lock_acquire+0xa6/0x210
[  397.873323]  lock_acquire+0xa6/0x210
[  397.873331]  ? drain_workqueue+0x19/0x180
[  397.873339]  __mutex_lock+0x89/0x980
[  397.873346]  ? drain_workqueue+0x19/0x180
[  397.873352]  ? _raw_spin_unlock_irqrestore+0x4c/0x60
[  397.873359]  ? trace_hardirqs_on_caller+0xe0/0x1b0
[  397.873365]  ? drain_workqueue+0x19/0x180
[  397.873373]  ? debug_object_active_state+0x127/0x150
[  397.873381]  ? drain_workqueue+0x19/0x180
[  397.873387]  drain_workqueue+0x19/0x180
[  397.873395]  destroy_workqueue+0x12/0x1f0
[  397.873476]  intel_guc_fini_misc+0x36/0x90 [i915]
[  397.873540]  i915_gem_fini+0x91/0x100 [i915]
[  397.873588]  i915_driver_unload+0xd2/0x110 [i915]
[  397.873638]  i915_pci_remove+0x19/0x30 [i915]
[  397.873646]  pci_device_remove+0x36/0xb0
[  397.873653]  device_release_driver_internal+0x185/0x250
[  397.873660]  driver_detach+0x35/0x70
[  397.873668]  bus_remove_driver+0x53/0xd0
[  397.873675]  pci_unregister_driver+0x25/0xa0
[  397.873683]  __se_sys_delete_module+0x162/0x210
[  397.873691]  ? do_syscall_64+0xd/0x190
[  397.873697]  do_syscall_64+0x55/0x190
[  397.873704]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
[  397.873710] RIP: 0033:0x7faf884231b7
[  397.873714] Code: 73 01 c3 48 8b 0d d1 8c 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a1 8c 2c 00 f7 d8 64 89 01 48
[  397.873775] RSP: 002b:00007ffda4e98cf8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0
[  397.873784] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007faf884231b7
[  397.873790] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000055fbb18f1bd8
[  397.873796] RBP: 000055fbb18f1b70 R08: 000055fbb18f1bdc R09: 00007ffda4e98d38
[  397.873802] R10: 00007ffda4e97cf4 R11: 0000000000000206 R12: 000055fbb0d32470
[  397.873808] R13: 00007ffda4e992e0 R14: 0000000000000000 R15: 0000000000000000

v2: It's use-after-free; not a NULL pointer.

Testcase: igt/drv_module_reload/basic-reload-inject
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180726085033.4044-1-chris@chris-wilson.co.uk
2018-07-26 12:53:17 +01:00
Chris Wilson
d899aceb60 drm/i915: Mark up object tiling-and-stride getters as const
For that little bit of defense against a tired programmer.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180725155447.11909-1-chris@chris-wilson.co.uk
2018-07-26 12:31:02 +01:00
Chris Wilson
406bc5633c drm/i915: Avoid computing tile_row_size() for untiled objects
i915_gem_tile_height() asserts that the object is tiled, but inside the
error printer for the selftest we computed the row size regardless of
tiling, tripping over the assert.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180726104759.8684-1-chris@chris-wilson.co.uk
2018-07-26 12:30:24 +01:00
Erich E. Hoover
9a7faac365 usb: dwc3: change stream event enable bit back to 13
Commit ff3f0789b3 ("usb: dwc3: use BIT() macro where possible")
changed DWC3_DEPCFG_STREAM_EVENT_EN from bit 13 to bit 12.

Spotted this cleanup typo while looking at diffs between 4.9.35 and
4.14.16 for a separate issue.

Fixes: ff3f0789b3 ("usb: dwc3: use BIT() macro where possible")
Signed-off-by: Erich E. Hoover <ehoover@sweptlaser.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-26 14:04:28 +03:00
Enric Balletbo i Serra
76251db865 usb: dwc3: of-simple: reset host controller at suspend/resume
If we power off the SoC logic rail in S3, we can find that the Type-C
PHY can't initialize correctly after system resume. We need to toggle
the USB3-OTG reset before trying to initialize the PHY, or else it
times out.

    phy phy-ff800000.phy.9: phy poweron failed --> -110
    dwc3 fe900000.dwc3: failed to initialize core
    dwc3: probe of fe900000.dwc3 failed with error -110

Note that the RK3399 TRM suggests that we should keep the whole usb3
controller in reset for the duration of the Type-C PHY initialization.
However, it's hard to assert the reset in the current framework of
reset. We're still skeptical about that, and we haven't yet found a
case where this seems to have mattered. This approach is much easier, it
simply holds the USB3-OTG reset while device is supended.

The dwc3 core is going to reinitialize the controller at suspend/resume
anyway (including a "soft reset"), so it should be safe to do this.

Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-26 14:01:50 +03:00
Jaejoong Kim
1fcba97e35 usb: gadget: storage: Remove reference counting
The kref used to be needed because sharing of fsg_common among multiple USB
function instances was handled by fsg. Now this is managed by configfs, we
don't need it anymore. So let's eliminate kref from this driver.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Signed-off-by: Jaejoong Kim <climbbb.kim@gmail.com>
Signed-off-by: Felipe Balbi <felipe.balbi@linux.intel.com>
2018-07-26 13:55:39 +03:00