[ Upstream commit bdeac78156 ]
Avoid leaking them or keeping the wcid on the tx list
Fixes: 0b3be9d1d3 ("wifi: mt76: add separate tx scheduling queue for off-channel tx")
Link: https://patch.msgid.link/20250827085352.51636-5-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4c2334587b ]
Only put probe request packets in the offchannel queue if
IEEE80211_TX_CTRL_DONT_USE_RATE_MASK is set and IEEE80211_TX_CTL_TX_OFFCHAN
is unset.
Fixes: 0b3be9d1d3 ("wifi: mt76: add separate tx scheduling queue for off-channel tx")
Reported-by: Chad Monroe <chad.monroe@adtran.com>
Link: https://patch.msgid.link/20250813121106.81559-2-nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f15701370 ]
&dev->mt76.mutex lock is taken using mt792x_mutex_acquire(dev) but not
released in one of the error paths, add the unlock to fix it.
Fixes: 5cd0bd815c ("wifi: mt76: mt7925: fix NULL deref check in mt7925_change_vif_links")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202503031055.3ZRqxhAl-lkp@intel.com/
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Link: https://patch.msgid.link/20250727140416.1153406-1-harshit.m.mogalapalli@oracle.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9cb83d4be0 ]
The brcmf_btcoex_detach() only shuts down the btcoex timer, if the
flag timer_on is false. However, the brcmf_btcoex_timerfunc(), which
runs as timer handler, sets timer_on to false. This creates critical
race conditions:
1.If brcmf_btcoex_detach() is called while brcmf_btcoex_timerfunc()
is executing, it may observe timer_on as false and skip the call to
timer_shutdown_sync().
2.The brcmf_btcoex_timerfunc() may then reschedule the brcmf_btcoex_info
worker after the cancel_work_sync() has been executed, resulting in
use-after-free bugs.
The use-after-free bugs occur in two distinct scenarios, depending on
the timing of when the brcmf_btcoex_info struct is freed relative to
the execution of its worker thread.
Scenario 1: Freed before the worker is scheduled
The brcmf_btcoex_info is deallocated before the worker is scheduled.
A race condition can occur when schedule_work(&bt_local->work) is
called after the target memory has been freed. The sequence of events
is detailed below:
CPU0 | CPU1
brcmf_btcoex_detach | brcmf_btcoex_timerfunc
| bt_local->timer_on = false;
if (cfg->btcoex->timer_on) |
... |
cancel_work_sync(); |
... |
kfree(cfg->btcoex); // FREE |
| schedule_work(&bt_local->work); // USE
Scenario 2: Freed after the worker is scheduled
The brcmf_btcoex_info is freed after the worker has been scheduled
but before or during its execution. In this case, statements within
the brcmf_btcoex_handler() — such as the container_of macro and
subsequent dereferences of the brcmf_btcoex_info object will cause
a use-after-free access. The following timeline illustrates this
scenario:
CPU0 | CPU1
brcmf_btcoex_detach | brcmf_btcoex_timerfunc
| bt_local->timer_on = false;
if (cfg->btcoex->timer_on) |
... |
cancel_work_sync(); |
... | schedule_work(); // Reschedule
|
kfree(cfg->btcoex); // FREE | brcmf_btcoex_handler() // Worker
/* | btci = container_of(....); // USE
The kfree() above could | ...
also occur at any point | btci-> // USE
during the worker's execution|
*/ |
To resolve the race conditions, drop the conditional check and call
timer_shutdown_sync() directly. It can deactivate the timer reliably,
regardless of its current state. Once stopped, the timer_on state is
then set to false.
Fixes: 61730d4dff ("brcmfmac: support critical protocol API for DHCP")
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Link: https://patch.msgid.link/20250822050839.4413-1-duoming@zju.edu.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e251709aad ]
During SD suspend/resume without a full card rescan (when using
non-removable SD cards for rootfs), the SD card initialization may fail
after resume. This occurs because, after a host controller reset, the
card detect logic may take time to stabilize due to debounce logic.
Without waiting for stabilization, the host may attempt powering up the
card prematurely, leading to command timeouts during resume flow.
Add sdhci_arasan_set_power_and_bus_voltage() to wait for the card detect
stable bit before power up the card. Since the stabilization time
is not fixed, a maximum timeout of one second is used to ensure
sufficient wait time for the card detect signal to stabilize.
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250730060543.1735971-1-sai.krishna.potthuri@amd.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11c7d66518 ]
Add hw_reset callback to support emmc hardware reset, this callback get
called from the mmc core only when "cap-mmc-hw-reset" property is
defined in the DT.
Signed-off-by: Paul Alvin <alvin.paulp@amd.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20241007095445.19340-1-alvin.paulp@amd.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Stable-dep-of: e251709aad ("mmc: sdhci-of-arasan: Ensure CD logic stabilization before power-up")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d35ec48fa6 ]
Since $(LD) is directly used, hence -nostdlib is unneeded, MIPS has
removed this, we should remove it too.
bdbf2038fb ("MIPS: VDSO: remove -nostdlib compiler flag").
In fact, other architectures also use $(LD) now.
fe00e50b2d ("ARM: 8858/1: vdso: use $(LD) instead of $(CC) to link VDSO")
691efbedc6 ("arm64: vdso: use $(LD) instead of $(CC) to link VDSO")
2ff906994b ("MIPS: VDSO: Use $(LD) instead of $(CC) to link VDSO")
2b2a25845d ("s390/vdso: Use $(LD) instead of $(CC) to link vDSO")
Cc: stable@vger.kernel.org
Reviewed-by: Yanteng Si <siyanteng@cqsoftware.com.cn>
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c271c86a4c ]
Glibc added support for .gnu.hash in 2006 and .hash has been obsoleted
far before the first LoongArch CPU was taped. Using --hash-style=sysv
might imply unaddressed issues and confuse readers.
Some architectures use an explicit --hash-style=both for vDSO here, but
DT_GNU_HASH has already been supported by Glibc and Musl and become the
de-facto standard of the distros when the first LoongArch CPU was taped.
So DT_HASH seems just wasting storage space for LoongArch.
Just drop the option and rely on the linker default, which is likely
"gnu" (Arch, Debian, Gentoo, LFS) on all LoongArch distros (confirmed on
Arch, Debian, Gentoo, and LFS; AOSC now defaults to "both" but it seems
just an oversight).
Following the logic of commit 48f6430505 ("arm64/vdso: Remove
--hash-style=sysv").
Link: https://github.com/AOSC-Dev/aosc-os-abbs/pull/9796
Signed-off-by: Xi Ruoyao <xry111@xry111.site>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Stable-dep-of: d35ec48fa6 ("LoongArch: vDSO: Remove -nostdlib complier flag")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5728b289ab ]
The correct name for FE990 is FE990A so use it in order to avoid
confusion with FE990B.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Link: https://patch.msgid.link/20250227112441.3653819-3-fabio.porcedda@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 61aaca8b89 ("net: usb: qmi_wwan: add Telit Cinterion FN990A w/audio composition")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad1664fb69 ]
The correct name for FN990 is FN990A so use it in order to avoid
confusion with FN990B.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Link: https://patch.msgid.link/20250205171649.618162-5-fabio.porcedda@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 61aaca8b89 ("net: usb: qmi_wwan: add Telit Cinterion FN990A w/audio composition")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c653ffc283 ]
The only user of hid_snto32() is Logitech HID++ driver, which always
calls hid_snto32() with valid size (constant, either 12 or 8) and
therefore can simply use sign_extend32().
Make the switch and remove hid_snto32(). Move snto32() and s32ton() to
avoid introducing forward declaration.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/20241003144656.3786064-2-dmitry.torokhov@gmail.com
[bentiss: fix checkpatch warning]
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Stable-dep-of: a6b87bfc2a ("HID: core: Harden s32ton() against conversion to 0 bits")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ae9b956cb2 ]
snto32() does exactly what sign_extend32() does, but handles
potentially malformed data coming from the device. Keep the checks,
but then call sign_extend32() to perform the actual conversion.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Link: https://patch.msgid.link/20241003144656.3786064-1-dmitry.torokhov@gmail.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Stable-dep-of: a6b87bfc2a ("HID: core: Harden s32ton() against conversion to 0 bits")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8073330629 ]
Add missing microSD slot vqmmc-supply property, otherwise the kernel
might shut down LDO5 regulator and that would power off the microSD
card slot, possibly while it is in use. Add the property to make sure
the kernel is aware of the LDO5 regulator which supplies the microSD
slot and keeps the LDO5 enabled.
Fixes: 562d222f23 ("arm64: dts: imx8mp: Add support for Data Modul i.MX8M Plus eDM SBC")
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c53cf8ce3b ]
Add missing microSD slot vqmmc-supply property, otherwise the kernel
might shut down LDO5 regulator and that would power off the microSD
card slot, possibly while it is in use. Add the property to make sure
the kernel is aware of the LDO5 regulator which supplies the microSD
slot and keeps the LDO5 enabled.
Fixes: 8d6712695b ("arm64: dts: imx8mp: Add support for DH electronics i.MX8M Plus DHCOM and PDK2")
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5245dc5ff9 ]
Fix SD card removal caused by automatic LDO5 power off after boot:
LDO5: disabling
mmc1: card 59b4 removed
EXT4-fs (mmcblk1p2): shut down requested (2)
Aborting journal on device mmcblk1p2-8.
JBD2: I/O error when updating journal superblock for mmcblk1p2-8.
To prevent this, add vqmmc regulator for USDHC, using a GPIO-controlled
regulator that is supplied by LDO5. Since this is implemented on SoM but
used on baseboards with SD-card interface, implement the functionality
on SoM part and optionally enable it on baseboards if needed.
Fixes: 418d1d840e ("arm64: dts: freescale: add initial device tree for TQMa8MPQL with i.MX8MP")
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1f9c49761 ]
As described in the pinebookpro_v2.1_mainboard_schematic.pdf page 10,
he SPI Flash's VCC connector is connected to VCC_3V0 power source.
This fixes the following warning:
spi-nor spi1.0: supply vcc not found, using dummy regulator
Fixes: 5a65505a69 ("arm64: dts: rockchip: Add initial support for Pinebook Pro")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20250730102129.224468-1-pbrobinson@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0ba0e7172 ]
Don't call ZONE FINISH for conventional zones as this will result in I/O
errors. Instead check if the zone that needs finishing is a conventional
zone and if yes skip it.
Also factor out the actual handling of finishing a single zone into a
helper function, as do_zone_finish() is growing ever bigger and the
indentations levels are getting higher.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3eaf14f4c ]
The set subcommand's -t option is documented as being available for boost
configuration, but it was not actually functioning due to a bug
in the option handling.
Link: https://lore.kernel.org/r/20250522061122.2149188-2-fj5851bi@fujitsu.com
Signed-off-by: Shinji Nomoto <fj5851bi@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8246147f1f ]
On some GPUs the VBIOS just doesn't have encoder caps,
or maybe not for every encoder.
This isn't really a problem and it's handled well,
so let's not litter the logs with it.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 33e0227ee9)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a73a36cb7 ]
This lets NetworkManager/ModemManager know that this is a modem and
needs to be connected first.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Link: https://patch.msgid.link/20250814154214.250103-1-lkundrak@v3.sk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 112ca94f6c ]
Now if preemption happens between protected_save_fpu_context() and
protected_save_lbt_context(), FTOP context is lost. Because FTOP is
saved by protected_save_lbt_context() but protected_save_fpu_context()
disables TM before that. So save LBT before FPU in setup_sigcontext()
to avoid this potential risk.
Signed-off-by: Hanlu Li <lihanlu@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 986bf6ed44 ]
At inode_logged() we do a couple lockless checks for ->logged_trans, and
these are generally safe except the second one in case we get a load or
store tearing due to a concurrent call updating ->logged_trans (either at
btrfs_log_inode() or later at inode_logged()).
In the first case it's safe to compare to the current transaction ID since
once ->logged_trans is set the current transaction, we never set it to a
lower value.
In the second case, where we check if it's greater than zero, we are prone
to load/store tearing races, since we can have a concurrent task updating
to the current transaction ID with store tearing for example, instead of
updating with a single 64 bits write, to update with two 32 bits writes or
four 16 bits writes. In that case the reading side at inode_logged() could
see a positive value that does not match the current transaction and then
return a false negative.
Fix this by doing the second check while holding the inode's spinlock, add
some comments about it too. Also add the data_race() annotation to the
first check to avoid any reports from KCSAN (or similar tools) and comment
about it.
Fixes: 0f8ce49821 ("btrfs: avoid inode logging during rename and link when possible")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59a0dd4ab9 ]
At inode_logged() if we find that the inode was not logged before we
update its ->last_dir_index_offset to (u64)-1 with the goal that the
next directory log operation will see the (u64)-1 and then figure out
it must check what was the index of the last logged dir index key and
update ->last_dir_index_offset to that key's offset (this is done in
update_last_dir_index_offset()).
This however has a possibility for a time window where a race can happen
and lead to directory logging skipping dir index keys that should be
logged. The race happens like this:
1) Task A calls inode_logged(), sees ->logged_trans as 0 and then checks
that the inode item was logged before, but before it sets the inode's
->last_dir_index_offset to (u64)-1...
2) Task B is at btrfs_log_inode() which calls inode_logged() early, and
that has set ->last_dir_index_offset to (u64)-1;
3) Task B then enters log_directory_changes() which calls
update_last_dir_index_offset(). There it sees ->last_dir_index_offset
is (u64)-1 and that the inode was logged before (ctx->logged_before is
true), and so it searches for the last logged dir index key in the log
tree and it finds that it has an offset (index) value of N, so it sets
->last_dir_index_offset to N, so that we can skip index keys that are
less than or equal to N (later at process_dir_items_leaf());
4) Task A now sets ->last_dir_index_offset to (u64)-1, undoing the update
that task B just did;
5) Task B will now skip every index key when it enters
process_dir_items_leaf(), since ->last_dir_index_offset is (u64)-1.
Fix this by making inode_logged() not touch ->last_dir_index_offset and
initializing it to 0 when an inode is loaded (at btrfs_alloc_inode()) and
then having update_last_dir_index_offset() treat a value of 0 as meaning
we must check the log tree and update with the index of the last logged
index key. This is fine since the minimum possible value for
->last_dir_index_offset is 1 (BTRFS_DIR_START_INDEX - 1 = 2 - 1 = 1).
This also simplifies the management of ->last_dir_index_offset and now
all accesses to it are done under the inode's log_mutex.
Fixes: 0f8ce49821 ("btrfs: avoid inode logging during rename and link when possible")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef07b74e1b ]
There's a race between checking if an inode was logged before and logging
an inode that can cause us to mark an inode as not logged just after it
was logged by a concurrent task:
1) We have inode X which was not logged before neither in the current
transaction not in past transaction since the inode was loaded into
memory, so it's ->logged_trans value is 0;
2) We are at transaction N;
3) Task A calls inode_logged() against inode X, sees that ->logged_trans
is 0 and there is a log tree and so it proceeds to search in the log
tree for an inode item for inode X. It doesn't see any, but before
it sets ->logged_trans to N - 1...
3) Task B calls btrfs_log_inode() against inode X, logs the inode and
sets ->logged_trans to N;
4) Task A now sets ->logged_trans to N - 1;
5) At this point anyone calling inode_logged() gets 0 (inode not logged)
since ->logged_trans is greater than 0 and less than N, but our inode
was really logged. As a consequence operations like rename, unlink and
link that happen afterwards in the current transaction end up not
updating the log when they should.
Fix this by ensuring inode_logged() only updates ->logged_trans in case
the inode item is not found in the log tree if after tacking the inode's
lock (spinlock struct btrfs_inode::lock) the ->logged_trans value is still
zero, since the inode lock is what protects setting ->logged_trans at
btrfs_log_inode().
Fixes: 0f8ce49821 ("btrfs: avoid inode logging during rename and link when possible")
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abad3d0bad ]
Lonial reported that an out-of-bounds access in cgroup local storage
can be crafted via tail calls. Given two programs each utilizing a
cgroup local storage with a different value size, and one program
doing a tail call into the other. The verifier will validate each of
the indivial programs just fine. However, in the runtime context
the bpf_cg_run_ctx holds an bpf_prog_array_item which contains the
BPF program as well as any cgroup local storage flavor the program
uses. Helpers such as bpf_get_local_storage() pick this up from the
runtime context:
ctx = container_of(current->bpf_ctx, struct bpf_cg_run_ctx, run_ctx);
storage = ctx->prog_item->cgroup_storage[stype];
if (stype == BPF_CGROUP_STORAGE_SHARED)
ptr = &READ_ONCE(storage->buf)->data[0];
else
ptr = this_cpu_ptr(storage->percpu_buf);
For the second program which was called from the originally attached
one, this means bpf_get_local_storage() will pick up the former
program's map, not its own. With mismatching sizes, this can result
in an unintended out-of-bounds access.
To fix this issue, we need to extend bpf_map_owner with an array of
storage_cookie[] to match on i) the exact maps from the original
program if the second program was using bpf_get_local_storage(), or
ii) allow the tail call combination if the second program was not
using any of the cgroup local storage maps.
Fixes: 7d9c342789 ("bpf: Make cgroup storages shared between programs on the same cgroup")
Reported-by: Lonial Con <kongln9170@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20250730234733.530041-4-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9621e60f59 ]
Move them into bpf.h given we also need them in core code.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20250730234733.530041-3-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: abad3d0bad ("bpf: Fix oob access in cgroup local storage")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd1c98f0ef ]
Given this is only relevant for BPF tail call maps, it is adding up space
and penalizing other map types. We also need to extend this with further
objects to track / compare to. Therefore, lets move this out into a separate
structure and dynamically allocate it only for BPF tail call maps.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20250730234733.530041-2-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Stable-dep-of: abad3d0bad ("bpf: Fix oob access in cgroup local storage")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12df58ad29 ]
Add a cookie to BPF maps to uniquely identify BPF maps for the timespan
when the node is up. This is different to comparing a pointer or BPF map
id which could get rolled over and reused.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20250730234733.530041-1-daniel@iogearbox.net
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 685a755089 upstream.
These commands are necessary to avoid severely abnormal and inaccurate
temperature readings that are caused by using the default commands.
Signed-off-by: Mason Chang <mason-cw.chang@mediatek.com>
Link: https://lore.kernel.org/r/20250526102659.30225-4-mason-cw.chang@mediatek.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6203a5e6fd upstream.
Add LVTS commands and their sizes to driver data in preparation for
adding different commands.
Signed-off-by: Mason Chang <mason-cw.chang@mediatek.com>
Link: https://lore.kernel.org/r/20250526102659.30225-3-mason-cw.chang@mediatek.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c5d5a72c01 upstream.
Change the LVTS commands array to static const in preparation for
adding different commands.
Signed-off-by: Mason Chang <mason-cw.chang@mediatek.com>
Link: https://lore.kernel.org/r/20250526102659.30225-2-mason-cw.chang@mediatek.com
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit 3c778a98be which is
commit a40c5d727b upstream.
The upstream commit a40c5d727b ("drm/dp:
Change AUX DPCD probe address from DPCD_REV to LANE0_1_STATUS") the
reverted commit backported causes a regression, on one eDP panel at
least resulting in display flickering, described in detail at the Link:
below. The issue fixed by the upstream commit will need a different
solution, revert the backport for now.
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: Sasha Levin <sashal@kernel.org>
Link: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14558
Signed-off-by: Imre Deak <imre.deak@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 80dc18a0cb upstream.
As per PCIe r6.0, sec 6.6.1, a Downstream Port that supports Link speeds
greater than 5.0 GT/s, software must wait a minimum of 100 ms after Link
training completes before sending a Configuration Request.
Add this delay in dw_pcie_wait_for_link(), after the link is reported as
up. The delay will only be performed in the success case where the link
came up.
DWC glue drivers that have a link up IRQ (drivers that set
use_linkup_irq = true) do not call dw_pcie_wait_for_link(), instead they
perform this delay in their threaded link up IRQ handler.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com>
Link: https://patch.msgid.link/20250625102347.1205584-14-cassel@kernel.org
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5dff50802b upstream.
the PPSMC_MSG_GetPptLimit msg is not valid for gfx 11.0.3 on vf mode,
so skiped to create power1_cap* hwmon sysfs node.
Signed-off-by: Yang Wang <kevinyang.wang@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit e82a8d4410)
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1f403699c4 upstream.
Using device_find_child() and of_find_device_by_node() to locate
devices could cause an imbalance in the device's reference count.
device_find_child() and of_find_device_by_node() both call
get_device() to increment the reference count of the found device
before returning the pointer. In mtk_drm_get_all_drm_priv(), these
references are never released through put_device(), resulting in
permanent reference count increments. Additionally, the
for_each_child_of_node() iterator fails to release node references in
all code paths. This leaks device node references when loop
termination occurs before reaching MAX_CRTC. These reference count
leaks may prevent device/node resources from being properly released
during driver unbind operations.
As comment of device_find_child() says, 'NOTE: you will need to drop
the reference with put_device() after use'.
Cc: stable@vger.kernel.org
Fixes: 1ef7ed4835 ("drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250812071932.471730-1-make24@iscas.ac.cn/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 66e82b6e0a upstream.
Function nvkm_gsp_fwsec_v2() sets 'ret' if the kmemdup() call fails, but
it never uses or returns 'ret' after that point. We always need to release
the firmware regardless, so do that and then check for error.
Fixes: 176fdcbddf ("drm/nouveau/gsp/r535: add support for booting GSP-RM")
Cc: stable@vger.kernel.org # v6.7+
Signed-off-by: Timur Tabi <ttabi@nvidia.com>
Link: https://lore.kernel.org/r/20250813001004.2986092-1-ttabi@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e2fe0c54fb upstream.
On some chipsets, which block-linear modifiers are
supported is format-specific. However, linear
modifiers are always be supported. The prior
modifier filtering logic was not accounting for
the linear case.
Cc: stable@vger.kernel.org
Fixes: c586f30bf7 ("drm/nouveau/kms: Add format mod prop to base/ovly/nvdisp")
Signed-off-by: James Jones <jajones@nvidia.com>
Link: https://lore.kernel.org/r/20250811220017.1337-3-jajones@nvidia.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b55ddf362 upstream.
Avoid triggering a dereference of an error pointer on cleanup in
xe_vm_free_scratch() by clearing any scratch_pt error pointer.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Fixes: 06951c2ee7 ("drm/xe: Use NULL PTEs as scratch PTEs")
Cc: Brian Welty <brian.welty@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250821143045.106005-4-thomas.hellstrom@linux.intel.com
(cherry picked from commit 358ee50ab5)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ae668cd567 upstream.
ENODATA (aka ENOATTR) has a very specific meaning in the xfs xattr code;
namely, that the requested attribute name could not be found.
However, a medium error from disk may also return ENODATA. At best,
this medium error may escape to userspace as "attribute not found"
when in fact it's an IO (disk) error.
At worst, we may oops in xfs_attr_leaf_get() when we do:
error = xfs_attr_leaf_hasname(args, &bp);
if (error == -ENOATTR) {
xfs_trans_brelse(args->trans, bp);
return error;
}
because an ENODATA/ENOATTR error from disk leaves us with a null bp,
and the xfs_trans_brelse will then null-deref it.
As discussed on the list, we really need to modify the lower level
IO functions to trap all disk errors and ensure that we don't let
unique errors like this leak up into higher xfs functions - many
like this should be remapped to EIO.
However, this patch directly addresses a reported bug in the xattr
code, and should be safe to backport to stable kernels. A larger-scope
patch to handle more unique errors at lower levels can follow later.
(Note, prior to 07120f1abd we did not oops, but we did return the
wrong error code to userspace.)
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Fixes: 07120f1abd ("xfs: Add xfs_has_attr and subroutines")
Cc: stable@vger.kernel.org # v5.9+
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
