[ Upstream commit 55e8ff8420 ]
By default, HPD was disabled on SN65DSI86 bridge. When the driver was
added (commit "a095f15c00e27"), the HPD_DISABLE bit was set in pre-enable
call which was moved to other function calls subsequently.
Later on, commit "c312b0df3b" added detect utility for DP mode. But with
HPD_DISABLE bit set, all the HPD events are disabled[0] and the debounced
state always return 1 (always connected state).
Set HPD_DISABLE bit conditionally based on display sink's connector type.
Since the HPD_STATE is reflected correctly only after waiting for debounce
time (~100-400ms) and adding this delay in detect() is not feasible
owing to the performace impact (glitches and frame drop), remove runtime
calls in detect() and add hpd_enable()/disable() bridge hooks with runtime
calls, to detect hpd properly without any delay.
[0]: <https://www.ti.com/lit/gpn/SN65DSI86> (Pg. 32)
Fixes: c312b0df3b ("drm/bridge: ti-sn65dsi86: Implement bridge connector operations for DP")
Cc: Max Krummenacher <max.krummenacher@toradex.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Tested-by: Ernest Van Hoecke <ernest.vanhoecke@toradex.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250624044835.165708-1-j-choudhary@ti.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1d1f7b15cb ]
Do not create a custom directory in debugfs-root, but use the
debugfs_init callback to create a custom directory at the given place
for the bridge. The new directory layout looks like this on a Renesas
GrayHawk-Single with a R-Car V4M SoC:
/sys/kernel/debug/dri/feb00000.display/DP-1/1-002c
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20250315201651.7339-2-wsa+renesas@sang-engineering.com
Stable-dep-of: 55e8ff8420 ("drm/bridge: ti-sn65dsi86: Add HPD for DisplayPort connector type")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d02b2103a0 ]
An earlier patch fixed a build failure with clang, but I still see the
same problem with some configurations using gcc:
drivers/gpu/drm/i915/i915_pmu.c: In function 'config_mask':
include/linux/compiler_types.h:568:38: error: call to '__compiletime_assert_462' declared with attribute error: BUILD_BUG_ON failed: bit > BITS_PER_TYPE(typeof_member(struct i915_pmu, enable)) - 1
drivers/gpu/drm/i915/i915_pmu.c:116:3: note: in expansion of macro 'BUILD_BUG_ON'
116 | BUILD_BUG_ON(bit >
As I understand it, the problem is that the function is not always fully
inlined, but the __builtin_constant_p() can still evaluate the argument
as being constant.
Marking it as __always_inline so far works for me in all configurations.
Fixes: a7137b1825 ("drm/i915/pmu: Fix build error with GCOV and AutoFDO enabled")
Fixes: a644fde77f ("drm/i915/pmu: Change bitmask of enabled events to u32")
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250620111824.3395007-1-arnd@kernel.org
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit ef69f9dd1c)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73eab78721 ]
commit 017fbb6690 ("drm/amdgpu/discovery: check ip_discovery fw file
available") added support for reading an amdgpu IP discovery bin file
for some specific products. If it's not found then it will fallback to
hardcoded values. However if it's not found there is also a lot of noise
about missing files and errors.
Adjust the error handling to decrease most messages to DEBUG and to show
users less about missing files.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Reported-by: Marcus Seyfarth <m.seyfarth@gmail.com>
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4312
Tested-by: Marcus Seyfarth <m.seyfarth@gmail.com>
Fixes: 017fbb6690 ("drm/amdgpu/discovery: check ip_discovery fw file available")
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250617183052.1692059-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 49f1f9f6c3)
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80a0e82829 ]
On chips without native IP discovery support, use the fw binary
if available, otherwise we can continue without it.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Flora Cui <flora.cui@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 73eab78721 ("drm/amd: Adjust output for discovery error handling")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6220729347 upstream.
Add check for the return value of alloc_ordered_workqueue()
in xe_display_create() to catch potential exception.
Fixes: 44e694958b ("drm/xe/display: Implement display support")
Cc: stable@vger.kernel.org
Signed-off-by: Haoxiang Li <haoxiang_li2024@163.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://lore.kernel.org/r/4ee1b0e5d1626ce1dde2e82af05c2edaed50c3aa.1747397638.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 5b62d63395)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ed5915cfce ]
This reverts commit d6e0208196.
The IS_DGFX check was put in place because error capture of buffer
objects is expected to be broken on devices with VRAM.
Userspace fix[1] to the impacted media driver has been submitted, merged
and a new driver release is out as 25.2.3 where the capture flag is
dropped on DG1 thus unblocking the usage of media driver on DG1.
[1] 93c07d9b4b
Cc: stable@vger.kernel.org # v6.0+
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Cc: Tvrtko Ursulin <tursulin@ursulin.net>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20250522064127.24293-1-joonas.lahtinen@linux.intel.com
[Joonas: Update message to point out the merged userspace fix]
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit d2dc30e0aa)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 25eeba495b ]
The intel-media-driver is currently broken on DG1 because
it uses EXEC_CAPTURE with recovarable contexts. Relax the
check to allow that.
I've also submitted a fix for the intel-media-driver:
https://github.com/intel/media-driver/pull/1920
Cc: stable@vger.kernel.org # v6.0+
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Testcase: igt/gem_exec_capture/capture-invisible
Fixes: 71b1669ea9 ("drm/i915/uapi: tweak error capture on recoverable contexts")
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Link: https://lore.kernel.org/r/20250411144313.11660-2-ville.syrjala@linux.intel.com
(cherry picked from commit d6e0208196)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Stable-dep-of: ed5915cfce ("Revert "drm/i915/gem: Allow EXEC_CAPTURE on recoverable contexts on DG1"")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 471db2c2d4 ]
When an entity from application B is killed, drm_sched_entity_kill()
removes all jobs belonging to that entity through
drm_sched_entity_kill_jobs_work(). If application A's job depends on a
scheduled fence from application B's job, and that fence is not properly
signaled during the killing process, application A's dependency cannot be
cleared.
This leads to application A hanging indefinitely while waiting for a
dependency that will never be resolved. Fix this issue by ensuring that
scheduled fences are properly signaled when an entity is killed, allowing
dependent applications to continue execution.
Signed-off-by: Lin.Cao <lincao12@amd.com>
Reviewed-by: Philipp Stanner <phasta@kernel.org>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250515020713.1110476-1-lincao12@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a359288ccb ]
To unmap and free seq64 memory when drm node close to free vm, if there
is signal accepted, then taking vm lock failed and leaking seq64 va
mapping, and then dmesg has error log "still active bo inside vm".
Change to use uninterruptible lock fix the mapping leaking and no dmesg
error log.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90237b16ec ]
This patch is to fix a kfd_prcess ref leak.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 30d105577a ]
xe_force_wake_get() now returns the reference count-incremented domain
mask. If it fails for individual domains, the return value will always
be 0. However, for XE_FORCEWAKE_ALL, it may return a non-zero value even
in the event of failure. Use helper xe_force_wake_ref_has_domain to verify
all domains are initialized or not. Update the return handling of
xe_force_wake_get() to reflect this behavior, and ensure that the return
value is passed as input to xe_force_wake_put().
v3
- return xe_wakeref_t instead of int in xe_force_wake_get()
- xe_force_wake_put() error doesn't need to be checked. It internally
WARNS on domain ack failure.
v4
- Rebase fix
v5
- return unsigned int for xe_force_wake_get()
- remove redundant XE_WARN_ON()
v6
- use helper for checking all initialized domains are awake or not.
v7
- Fix commit message
v9
- Remove redundant WARN_ON (Badal)
Cc: Badal Nilawar <badal.nilawar@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241014075601.2324382-10-himal.prasad.ghimiray@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Stable-dep-of: 16c1241b08 ("drm/xe/bmg: Update Wa_16023588340")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 501d799a47 ]
The system is turning off, and we should probably put the device
in a safe power state. We don't need to evict VRAM or suspend running
jobs to a safe state, as the device is rebooted anyway.
This does not imply the system is necessarily reset, as we can
kexec into a new kernel. Without shutting down, things like
USB Type-C may mysteriously start failing.
References: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/3500
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
[mlankhorst: Add !xe_driver_flr_disabled assert]
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240905150052.174895-4-maarten.lankhorst@linux.intel.com
Stable-dep-of: 16c1241b08 ("drm/xe/bmg: Update Wa_16023588340")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7137b1825 ]
i915_pmu.c may fail to build with GCOV and AutoFDO enabled.
../drivers/gpu/drm/i915/i915_pmu.c:116:3: error: call to '__compiletime_assert_487' declared with 'error' attribute: BUILD_BUG_ON failed: bit > BITS_PER_TYPE(typeof_member(struct i915_pmu, enable)) - 1
116 | BUILD_BUG_ON(bit >
| ^
Here is a way to reproduce the issue:
$ git checkout v6.15
$ mkdir build
$ ./scripts/kconfig/merge_config.sh -O build -n -m <(cat <<EOF
CONFIG_DRM=y
CONFIG_PCI=y
CONFIG_DRM_I915=y
CONFIG_PERF_EVENTS=y
CONFIG_DEBUG_FS=y
CONFIG_GCOV_KERNEL=y
CONFIG_GCOV_PROFILE_ALL=y
CONFIG_AUTOFDO_CLANG=y
EOF
)
$ PATH=${PATH}:${HOME}/llvm-20.1.5-x86_64/bin make LLVM=1 O=build \
olddefconfig
$ PATH=${PATH}:${HOME}/llvm-20.1.5-x86_64/bin make LLVM=1 O=build \
CLANG_AUTOFDO_PROFILE=...PATH_TO_SOME_AFDO_PROFILE... \
drivers/gpu/drm/i915/i915_pmu.o
Although not super sure what happened, by reviewing the code, it should
depend on `__builtin_constant_p(bit)` directly instead of assuming
`__builtin_constant_p(config)` makes `bit` a builtin constant.
Also fix a nit, to reuse the `bit` local variable.
Fixes: a644fde77f ("drm/i915/pmu: Change bitmask of enabled events to u32")
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20250612083023.562585-1-tzungbi@kernel.org
(cherry picked from commit 686d773186)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61b2b37374 ]
The nouveau_get_backlight_name() function generates a unique name for the
backlight interface, appending an id from 1 to 99 for all backlight devices
after the first.
GCC 15 (and likely other compilers) produce the following
-Wformat-truncation warning:
nouveau_backlight.c: In function ‘nouveau_backlight_init’:
nouveau_backlight.c:56:69: error: ‘%d’ directive output may be truncated writing between 1 and 10 bytes into a region of size 3 [-Werror=format-truncation=]
56 | snprintf(backlight_name, BL_NAME_SIZE, "nv_backlight%d", nb);
| ^~
In function ‘nouveau_get_backlight_name’,
inlined from ‘nouveau_backlight_init’ at nouveau_backlight.c:351:7:
nouveau_backlight.c:56:56: note: directive argument in the range [1, 2147483647]
56 | snprintf(backlight_name, BL_NAME_SIZE, "nv_backlight%d", nb);
| ^~~~~~~~~~~~~~~~
nouveau_backlight.c:56:17: note: ‘snprintf’ output between 14 and 23 bytes into a destination of size 15
56 | snprintf(backlight_name, BL_NAME_SIZE, "nv_backlight%d", nb);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The warning started appearing after commit ab244be47a ("drm/nouveau:
Fix a potential theorical leak in nouveau_get_backlight_name()") This fix
for the ida usage removed the explicit value check for ids larger than 99.
The compiler is unable to intuit that the ida_alloc_max() limits the
returned value range between 0 and 99.
Because the compiler can no longer infer that the number ranges from 0 to
99, it thinks that it could use as many as 11 digits (10 + the potential -
sign for negative numbers).
The warning has gone unfixed for some time, with at least one kernel test
robot report. The code breaks W=1 builds, which is especially frustrating
with the introduction of CONFIG_WERROR.
The string is stored temporarily on the stack and then copied into the
device name. Its not a big deal to use 11 more bytes of stack rounding out
to an even 24 bytes. Increase BL_NAME_SIZE to 24 to avoid the truncation
warning. This fixes the W=1 builds that include this driver.
Compile tested only.
Fixes: ab244be47a ("drm/nouveau: Fix a potential theorical leak in nouveau_get_backlight_name()")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202312050324.0kv4PnfZ-lkp@intel.com/
Suggested-by: Timur Tabi <ttabi@nvidia.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20250610-jk-nouveua-drm-bl-snprintf-fix-v2-1-7fdd4b84b48e@intel.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e479da4054 ]
The number of columns relates to the width, not the height. Use the
correct variable.
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Fixes: fdd591e00a ("drm/ssd130x: Add support for the SSD132x OLED controller family")
Link: https://lore.kernel.org/r/20250611111307.1814876-1-jkeeping@inmusicbrands.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b520c6104 ]
Calling this packet is necessary when we switch contexts because there
are various pieces of state used by userspace to synchronize between BR
and BV that are persistent across submits and we need to make sure that
they are in a "safe" state when switching contexts. Otherwise a
userspace submission in one context could cause another context to
function incorrectly and hang, effectively a denial of service (although
without leaking data). This was missed during initial a7xx bringup.
Fixes: af66706acc ("drm/msm/a6xx: Add skeleton A7xx support")
Signed-off-by: Connor Abbott <cwabbott0@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/654924/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a48e35bec ]
Driver unconditionally saves current state on first init in
dsi_pll_10nm_init(), but does not save the VCO rate, only some of the
divider registers. The state is then restored during probe/enable via
msm_dsi_phy_enable() -> msm_dsi_phy_pll_restore_state() ->
dsi_10nm_pll_restore_state().
Restoring calls dsi_pll_10nm_vco_set_rate() with
pll_10nm->vco_current_rate=0, which basically overwrites existing rate of
VCO and messes with clock hierarchy, by setting frequency to 0 to clock
tree. This makes anyway little sense - VCO rate was not saved, so
should not be restored.
If PLL was not configured configure it to minimum rate to avoid glitches
and configuring entire in clock hierarchy to 0 Hz.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Link: https://lore.kernel.org/r/sz4kbwy5nwsebgf64ia7uq4ee7wbsa5uy3xmlqwcstsbntzcov@ew3dcyjdzmi2/
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Fixes: a4ccc37693 ("drm/msm/dsi_pll_10nm: restore VCO rate during
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/654796/
Link: https://lore.kernel.org/r/20250520111325.92352-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ee7360fc27 upstream.
On VCN v4.0.5 there is a race condition where the WPTR is not
updated after starting from idle when doorbell is used. Adding
register read-back after written at function end is to ensure
all register writes are done before they can be used.
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/12528
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Tested-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Ruijing Dong <ruijing.dong@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 07c9db090b)
Cc: stable@vger.kernel.org
(cherry picked from commit ee7360fc27)
Hand modified for contextual changes where there is a for loop
in 6.12 that was dropped later on.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eb0851e144 upstream.
Coverity scan reported the usage of "mode->clock * 1000" may lead to
integer overflow. Use "1000ULL" instead of "1000"
when utilizing it to avoid potential integer overflow issue.
Link: https://scan5.scan.coverity.com/#/project-view/10074/10063?selectedIssue=1646759
Signed-off-by: I Hsin Cheng <richard120310@gmail.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Fixes: 1017560164 ("drm/meson: use unsigned long long / Hz for frequency types")
Link: https://lore.kernel.org/r/20250505184338.678540-1-richard120310@gmail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0cee6c4d35 ]
Commit 1017560164 ("drm/meson: use unsigned long long / Hz for
frequency types") attempts to resolve video playback using 59.94Hz.
using YUV420 by changing the clock calculation to use
Hz instead of kHz (thus yielding more precision).
The basic calculation itself is correct, however the comparisions in
meson_vclk_vic_supported_freq() and meson_vclk_setup() don't work
anymore for 59.94Hz modes (using the freq * 1000 / 1001 logic). For
example, drm/edid specifies a 593407kHz clock for 3840x2160@59.94Hz.
With the mentioend commit we convert this to Hz. Then meson_vclk
tries to find a matchig "params" entry (as the clock setup code
currently only supports specific frequencies) by taking the venc_freq
from the params and calculating the "alt frequency" (used for the
59.94Hz modes) from it, which is:
(594000000Hz * 1000) / 1001 = 593406593Hz
Similar calculation is applied to the phy_freq (TMDS clock), which is 10
times the pixel clock.
Implement a new meson_vclk_freqs_are_matching_param() function whose
purpose is to compare if the requested and calculated frequencies. They
may not match exactly (for the reasons mentioned above). Allow the
clocks to deviate slightly to make the 59.94Hz modes again.
Fixes: 1017560164 ("drm/meson: use unsigned long long / Hz for frequency types")
Reported-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250609202751.962208-1-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit faf2f83820 ]
meson_vclk_vic_supported_freq() has a debug print which includes the
pixel freq. However, within the whole function the pixel freq is
irrelevant, other than checking the end of the params array. Switch to
printing the vclk_freq which is being compared / matched against the
inputs to the function to avoid confusion when analyzing error reports
from users.
Fixes: e5fab2ec9c ("drm/meson: vclk: add support for YUV420 setup")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250606221031.3419353-1-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d17e61ab63 ]
The "phy" and "vclk" frequency labels were swapped, making it more
difficult to debug driver errors. Swap the label order to make them
match with the actual frequencies printed to correct this.
Fixes: e5fab2ec9c ("drm/meson: vclk: add support for YUV420 setup")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250606203729.3311592-1-martin.blumenstingl@googlemail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1017560164 ]
Christian reports that 4K output using YUV420 encoding fails with the
following error:
Fatal Error, invalid HDMI vclk freq 593406
Modetest shows the following:
3840x2160 59.94 3840 4016 4104 4400 2160 2168 2178 2250 593407 flags: xxxx, xxxx,
drm calculated value -------------------------------------^
This indicates that there's a (1kHz) mismatch between the clock
calculated by the drm framework and the meson driver.
Relevant function call stack:
(drm framework)
-> meson_encoder_hdmi_atomic_enable()
-> meson_encoder_hdmi_set_vclk()
-> meson_vclk_setup()
The video clock requested by the drm framework is 593407kHz. This is
passed by meson_encoder_hdmi_atomic_enable() to
meson_encoder_hdmi_set_vclk() and the following formula is applied:
- the frequency is halved (which would be 296703.5kHz) and rounded down
to the next full integer, which is 296703kHz
- TMDS clock is calculated (296703kHz * 10)
- video encoder clock is calculated - this needs to match a table from
meson_vclk.c and so it doubles the previously halved value again
(resulting in 593406kHz)
- meson_vclk_setup() can't find (either directly, or by deriving it from
594000kHz * 1000 / 1001 and rounding to the closest integer value -
which is 593407kHz as originally requested by the drm framework) a
matching clock in it's internal table and errors out with "invalid
HDMI vclk freq"
Fix the division precision by switching the whole meson driver to use
unsigned long long (64-bit) Hz values for clock frequencies instead of
unsigned int (32-bit) kHz to fix the rouding error.
Fixes: e5fab2ec9c ("drm/meson: vclk: add support for YUV420 setup")
Reported-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250421201300.778955-3-martin.blumenstingl@googlemail.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250421201300.778955-3-martin.blumenstingl@googlemail.com
Stable-dep-of: d17e61ab63 ("drm/meson: fix debug log statement when setting the HDMI clocks")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5dc1ea9035 ]
The panel lacked the connector type which causes a warning. Adding the
connector type reveals wrong bus_flags and bits per pixel. Fix all of
it.
Fixes: 1319f2178b ("drm/panel-simple: add Evervision VGG644804 panel entry")
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250520074110.655114-1-mwalle@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0323a5127e ]
There is a rare race condition when preparing for a reset where
guc_lrc_desc_unpin() could be in the process of deregistering a context
while a different thread is scrubbing outstanding contexts and it alters
the context state and does a wakeref put. Then, if there is a failure
with deregister_context(), a second wakeref put could occur. As a result
the wakeref count could drop below 0 and fail an INTEL_WAKEREF_BUG_ON()
check.
Therefore if there is a failure with deregister_context(), undo the
context state changes and do a wakeref put only if the context was set
to be destroyed earlier.
v2: Expand comment to better explain change. (Daniele)
v3: Removed addition to the original comment. (Daniele)
Fixes: 2f2cc53b5f ("drm/i915/guc: Close deregister-context race against CT-loss")
Signed-off-by: Jesus Narvaez <jesus.narvaez@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Mousumi Jana <mousumi.jana@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250528230551.1855177-1-jesus.narvaez@intel.com
(cherry picked from commit f36a75aba1)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c557fd1050 ]
When sending a H2G message where a reply is expected in
guc_submission_send_busy_loop(), outstanding_submission_g2h is
incremented before the send. However, if there is an error sending the
message, outstanding_submission_g2h is decremented without checking if a
reply is expected.
Therefore, check if reply is expected when there is a failure before
decrementing outstanding_submission_g2h.
Fixes: 2f2cc53b5f ("drm/i915/guc: Close deregister-context race against CT-loss")
Signed-off-by: Jesus Narvaez <jesus.narvaez@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Mousumi Jana <mousumi.jana@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://lore.kernel.org/r/20250514225224.4142684-1-jesus.narvaez@intel.com
(cherry picked from commit a6a26786f2)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55f8aa0836 ]
The documentation was created with the creation of the component,
however it has never been actually shown in the actual Documentation.
While doing this, fixes the identation style, to avoid new warnings
while building htmldocs.
Fixes: bef52b5c7a ("drm/xe: Create a xe_gt_freq component for raw management and sysfs")
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250521165146.39616-3-rodrigo.vivi@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit af53f0fd99)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 94c9337165 ]
When calling component_bind_all(), if a component that is included
in the list fails, all of those that have been successfully bound
will be unbound, but this driver has two components lists for two
actual devices, as in, each mmsys instance has its own components
list.
In case mmsys0 (or actually vdosys0) is able to bind all of its
components, but the secondary one fails, all of the components of
the first are kept bound, while the ones of mmsys1/vdosys1 are
correctly cleaned up.
This is not right because, in case of a failure, the components
are re-bound for all of the mmsys/vdosys instances without caring
about the ones that were previously left in a bound state.
Fix that by calling component_unbind_all() on all of the previous
component masters that succeeded binding all subdevices when any
of the other masters errors out.
Fixes: 1ef7ed4835 ("drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support")
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250403104741.71045-4-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80805b62ea ]
In function mtk_drm_get_all_drm_priv(), this driver is incrementing
the refcount for the sub-drivers of mediatek-drm with a call to
device_find_child() when taking a reference to all of those child
devices.
When the component bind fails multiple times this results in a
refcount_t overflow, as the reference count is never decremented:
fix that by adding a call to put_device() for all of the mmsys
devices in a loop, in error cases of mtk_drm_bind() and in the
mtk_drm_unbind() callback.
Fixes: 1ef7ed4835 ("drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support")
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250403104741.71045-3-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22918591fb ]
This driver is taking a kobject for mtk_mutex only once per mmsys
device for each drm-mediatek driver instance, differently from the
behavior with other components, but it is decrementing the kobj's
refcount in a loop and once per mmsys: this is not right and will
result in a refcount_t underflow warning when mediatek-drm returns
multiple probe deferrals in one boot (or when manually bound and
unbound).
Besides that, the refcount for mutex_dev was not decremented for
error cases in mtk_drm_bind(), causing another refcount_t warning
but this time for overflow, when the failure happens not during
driver bind but during component bind.
In order to fix one of the reasons why this is happening, remove
the put_device(xx->mutex_dev) loop from the mtk_drm_kms_init()'s
put_mutex_dev label (and drop the label) and add a single call to
correctly free the single incremented refcount of mutex_dev to
the mtk_drm_unbind() function to fix the refcount_t underflow.
Moreover, add the same call to the error cases in mtk_drm_bind()
to fix the refcount_t overflow.
Fixes: 1ef7ed4835 ("drm/mediatek: Modify mediatek-drm for mt8195 multi mmsys support")
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20250403104741.71045-2-angelogioacchino.delregno@collabora.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a9c1bea01 ]
This feature is supposed to be enabled with UBWC v4 or later.
Implementations of this SKU feature an effective UBWC version of 3, so
disable it, in line with the BSP kernel.
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Akhil P Oommen <quic_akhilpo@quicinc.com>
Fixes: 192f4ee3e4 ("drm/msm/a6xx: Add support for Adreno 7c Gen 3 gpu")
Signed-off-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/651759/
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c36423350 ]
The of_get_child_by_name() increments the refcount in tegra_dc_rgb_probe,
but the driver does not decrement the refcount during unbind. Fix the
unbound reference count using devm_add_action_or_reset() helper.
Fixes: d8f4a9eda0 ("drm: Add NVIDIA Tegra20 support")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20250205112137.36055-1-biju.das.jz@bp.renesas.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 258aebf100 ]
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct vkms_plane_state **", but the returned type
will be "struct drm_plane **". These are the same size (pointer size), but
the types don't match. Adjust the allocation type to match the assignment.
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: Louis Chauvet <louis.chauvet@bootlin.com>
Fixes: 8b18658736 ("drm/vkms: totally reworked crc data tracking")
Link: https://lore.kernel.org/r/20250426061431.work.304-kees@kernel.org
Signed-off-by: Louis Chauvet <contact@louischauvet.fr>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91e3bf09a9 ]
The rcar_du_vsps_init() doesn't free the np allocated by
of_parse_phandle_with_fixed_args() for the non-error case.
Fix memory leak for the non-error case.
While at it, replace the label 'error'->'done' as it applies to non-error
case as well and update the error check condition for rcar_du_vsp_init()
to avoid breakage in future, if it returns positive value.
Fixes: 3e81374e20 ("drm: rcar-du: Support multiple sources from the same VSP")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20231116122424.80136-1-biju.das.jz@bp.renesas.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b848cd418a ]
If lt9611uxc_audio_init() fails, some resources still need to be released
before returning the error code.
Use the existing error handling path.
Fixes: 0cbbd5b1a0 ("drm: bridge: add support for lontium LT9611UXC bridge")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/f167608e392c6b4d7d7f6e45e3c21878feb60cbd.1744958833.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1eb7293ab ]
We never properly supported this panel and always used the wrong init
sequence. Drop support so we can move it to it's own proper driver.
Fixes: 5933baa36e ("drm/panel/samsung-sofef00: Add panel for OnePlus 6/T devices")
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250419-drop-s6e3fc2x01-support-v1-1-05edfe0d27aa@ixit.cz
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ba64cf2f3 ]
When we clear the faulty bits in the AS mask, we also need to update
the panthor_mmu::irq::mask field otherwise our IRQ handler won't get
called again until the GPU is reset.
Changes in v2:
- Add Liviu's R-b
Changes in v3:
- Add Steve's R-b
Fixes: 647810ec24 ("drm/panthor: Add the MMU/VM logical block")
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250404080933.2912674-4-boris.brezillon@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 820116a39f ]
The function atomctrl_initialize_mc_reg_table() and
atomctrl_initialize_mc_reg_table_v2_2() does not check the return
value of smu_atom_get_data_table(). If smu_atom_get_data_table()
fails to retrieve vram_info, it returns NULL which is later
dereferenced.
Fixes: b3892e2bb5 ("drm/amd/pp: Use atombios api directly in powerplay (v2)")
Fixes: 5f92b48cf6 ("drm/amd/pm: add mc register table initialization")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e26a3740c ]
The vc4_mock_atomic_add_output() and vc4_mock_atomic_del_output() assert
that the functions they are calling didn't fail. Since some of them can
return EDEADLK, we can't properly deal with it.
Since both functions are expected to return an int, and all caller check
the return value, let's just properly propagate the errors when they
occur.
Fixes: f759f5b53f ("drm/vc4: tests: Introduce a mocking infrastructure")
Fixes: 76ec18dc5a ("drm/vc4: tests: Add unit test suite for the PV muxing")
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Link: https://lore.kernel.org/r/20250403-drm-vc4-kunit-failures-v2-1-e09195cc8840@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f945dd89fa ]
According to pci core guidelines, pci_save_config is recommended when the
driver explicitly needs to set the pci power state. As of now xe kmd is
only doing pci_save_config while entering to s2idle/s3 state, which makes
pci core think that device driver has already applied required pci power
state. This leads to GPU remain in D0 state. To fix the issue setting
the pci power state to D3Cold.
Fixes:dd08ebf6c352 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Badal Nilawar <badal.nilawar@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250327161914.432552-1-badal.nilawar@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
