Some driver use fence->ops to test if a fence was initialized or not.
The problem is that this utilizes internal behavior of the dma_fence
implementation.
So better abstract that into a function.
v2: use a flag instead of testing fence->ops, rename the function, move
to the beginning of the patch set.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://lore.kernel.org/r/20260120105655.7134-2-christian.koenig@amd.com
T-Head TH1520 SoC contains a Synopsys DesignWare HDMI controller (paired
with DesignWare HDMI TX PHY Gen2) that takes the "DP" output from the
display controller.
Add a driver for this controller utilizing the common DesignWare HDMI
code in the kernel.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Tested-by: Han Gao <gaohan@iscas.ac.cn>
Tested-by: Michal Wilczynski <m.wilczynski@samsung.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260129023922.1527729-6-zhengxingda@iscas.ac.cn
T-Head TH1520 SoC contains a Synopsys DesignWare HDMI controller paired
with DesignWare HDMI PHY, with an extra clock gate for HDMI pixel clock
and two reset controls.
Add a device tree binding to it.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260129023922.1527729-5-zhengxingda@iscas.ac.cn
This is a from-scratch driver targeting Verisilicon DC-series display
controllers, which feature self-identification functionality like their
GC-series GPUs.
Only DC8200 is being supported now, and only the main framebuffer is set
up (as the DRM primary plane). Support for more DC models and more
features is my further targets.
As the display controller is delivered to SoC vendors as a whole part,
this driver does not use component framework and extra bridges inside a
SoC is expected to be implemented as dedicated bridges (this driver
properly supports bridge chaining).
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Tested-by: Han Gao <gaohan@iscas.ac.cn>
Tested-by: Michal Wilczynski <m.wilczynski@samsung.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260129023922.1527729-4-zhengxingda@iscas.ac.cn
Verisilicon has a series of display controllers prefixed with DC and
with self-identification facility like their GC series GPUs.
Add a device tree binding for it.
Depends on the specific DC model, it can have either one or two display
outputs, and each display output could be set to DPI signal or "DP"
signal (which seems to be some plain parallel bus to HDMI controllers).
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260129023922.1527729-3-zhengxingda@iscas.ac.cn
VeriSilicon is a Silicon IP vendor, which is the current owner of
Vivante series video-related IPs and Hantro series video codec IPs.
Add a vendor prefix for this company.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
Signed-off-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260129023922.1527729-2-zhengxingda@iscas.ac.cn
According to the include/drm/drm_bridge.h, the callback
&drm_bridge_funcs.mode_set is deprecated and it should be better to
include the mode setting in the &drm_bridge_funcs.atomic_enable instead.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> (on rk3588)
Link: https://patch.msgid.link/20251217093321.3108939-4-damon.ding@rock-chips.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Use the tap instead of the space for &analogix_dp_device.aux and
&analogix_dp_device.force_hpd.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> (on rk3588)
Link: https://patch.msgid.link/20251217093321.3108939-3-damon.ding@rock-chips.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
When multiple bridges are present, EDID detection capability
(DRM_BRIDGE_OP_EDID) takes precedence over modes detection
(DRM_BRIDGE_OP_MODES). To ensure the above two capabilities are
determined by the last bridge in the chain, we handle three cases:
Case 1: The later bridge declares only DRM_BRIDGE_OP_MODES
- If the previous bridge declares DRM_BRIDGE_OP_EDID, set
&drm_bridge_connector.bridge_edid to NULL and set
&drm_bridge_connector.bridge_modes to the later bridge.
- Ensure modes detection capability of the later bridge will not
be ignored.
Case 2: The later bridge declares only DRM_BRIDGE_OP_EDID
- If the previous bridge declares DRM_BRIDGE_OP_MODES, set
&drm_bridge_connector.bridge_modes to NULL and set
&drm_bridge_connector.bridge_edid to the later bridge.
- Although EDID detection capability has higher priority, this
operation is for balance and makes sense.
Case 3: the later bridge declares both of them
- Assign later bridge as &drm_bridge_connector.bridge_edid and
and &drm_bridge_connector.bridge_modes to this bridge.
- Just leave transfer of these two capabilities as before.
Signed-off-by: Damon Ding <damon.ding@rock-chips.com>
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Heiko Stuebner <heiko@sntech.de> (on rk3588)
Link: https://patch.msgid.link/20251217093321.3108939-2-damon.ding@rock-chips.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
FriendlyELEC's HD702E module is an eDP panel (in as much as it's some
LVDS LCD behind a Chrontel CH7511B eDP bridge), so move its data over
to the eDP driver, also resolving the warning about the missing bpc
value in the process.
The unfortunate combination of HPD not being wired up and the RK3399 eDP
controller's behaviour seems to result in the EDID not being readable
over DP-AUX without probing the panel first, thus the hard-coded mode is
still needed to get things going.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/a00a59dcef3693efb02a8ee942848fbeaeaf05ba.1769191673.git.robin.murphy@arm.com
Replace calls to deprecated mipi_dsi_dcs_nop() with
mipi_dsi_dcs_nop_multi(). No intended functional changes.
Signed-off-by: Caio Ishikawa <caio.ishikawa@proton.me>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://patch.msgid.link/20260124124959.196051-3-caio.ishikawa@proton.me
The IDR interface is deprecated and the XArray API is the recommended
replacement. Replace the per-file IDR used to track perfmons with an
XArray. This allows us to remove the external mutex that protects the
IDR.
While at it, introduce the vc4_perfmon_delete() helper to consolidate
the perfmon cleanup logic used by both vc4_perfmon_close_file() and
vc4_perfmon_destroy_ioctl(). Also, remove the redundant assignment of
vc4file->dev to itself in vc4_perfmon_open_file().
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patch.msgid.link/20260127115822.64401-2-mcanal@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
The IDR interface is deprecated and the XArray API is the recommended
replacement. Replace the per-file IDR used to track perfmons with an
XArray. This allows us to remove the external mutex that protects the
IDR.
While here, introduce the v3d_perfmon_delete() helper to consolidate
the perfmon cleanup logic used by both v3d_perfmon_close_file() and
v3d_perfmon_destroy_ioctl().
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Link: https://patch.msgid.link/20260127115822.64401-1-mcanal@igalia.com
Signed-off-by: Maíra Canal <mcanal@igalia.com>
. Fix a regression where vidi_connection_ioctl() used the wrong device
to look up the vidi context. It stores the vidi device in exynos_drm_private
and uses it in ioctl(), preventing invalid pointer access and related bugs.
. Fix a security regression where vidi_connection_ioctl() directly dereferenced
a user pointer for EDID data. It copies EDID from user space
with copy_from_user() into kernel memory before use, preventing arbitrary
kernel memory access.
. Fix a concurrency regression where vidi_context members related
to EDID memory were accessed without locking. It protects alloc/free and
state updates with ctx->lock, preventing race conditions and use-after-free bugs.
-----BEGIN PGP SIGNATURE-----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=xWsw
-----END PGP SIGNATURE-----
Merge tag 'exynos-drm-next-for-v6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next
Fix three regressions
. Fix a regression where vidi_connection_ioctl() used the wrong device
to look up the vidi context. It stores the vidi device in exynos_drm_private
and uses it in ioctl(), preventing invalid pointer access and related bugs.
. Fix a security regression where vidi_connection_ioctl() directly dereferenced
a user pointer for EDID data. It copies EDID from user space
with copy_from_user() into kernel memory before use, preventing arbitrary
kernel memory access.
. Fix a concurrency regression where vidi_context members related
to EDID memory were accessed without locking. It protects alloc/free and
state updates with ctx->lock, preventing race conditions and use-after-free bugs.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Inki Dae <inki.dae@samsung.com>
Link: https://patch.msgid.link/20260201143939.27074-1-inki.dae@samsung.com
Exynos Virtual Display driver performs memory alloc/free operations
without lock protection, which easily causes concurrency problem.
For example, use-after-free can occur in race scenario like this:
```
CPU0 CPU1 CPU2
---- ---- ----
vidi_connection_ioctl()
if (vidi->connection) // true
drm_edid = drm_edid_alloc(); // alloc drm_edid
...
ctx->raw_edid = drm_edid;
...
drm_mode_getconnector()
drm_helper_probe_single_connector_modes()
vidi_get_modes()
if (ctx->raw_edid) // true
drm_edid_dup(ctx->raw_edid);
if (!drm_edid) // false
...
vidi_connection_ioctl()
if (vidi->connection) // false
drm_edid_free(ctx->raw_edid); // free drm_edid
...
drm_edid_alloc(drm_edid->edid)
kmemdup(edid); // UAF!!
...
```
To prevent these vulns, at least in vidi_context, member variables related
to memory alloc/free should be protected with ctx->lock.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
In vidi_connection_ioctl(), vidi->edid(user pointer) is directly
dereferenced in the kernel.
This allows arbitrary kernel memory access from the user space, so instead
of directly accessing the user pointer in the kernel, we should modify it
to copy edid to kernel memory using copy_from_user() and use it.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
vidi_connection_ioctl() retrieves the driver_data from drm_dev->dev to
obtain a struct vidi_context pointer. However, drm_dev->dev is the
exynos-drm master device, and the driver_data contained therein is not
the vidi component device, but a completely different device.
This can lead to various bugs, ranging from null pointer dereferences and
garbage value accesses to, in unlucky cases, out-of-bounds errors,
use-after-free errors, and more.
To resolve this issue, we need to store/delete the vidi device pointer in
exynos_drm_private->vidi_dev during bind/unbind, and then read this
exynos_drm_private->vidi_dev within ioctl() to obtain the correct
struct vidi_context pointer.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Make use of the recently introduced dw_hdmi_qp_write_infoframe() helper
to simplify the writing of the Audio InfoFrame packet header and body
registers.
Additionally, discard the redundant static values identifying the frame
version and length.
Moreover, since now having dedicated callbacks per InfoFrame type, move
the implementation to dw_hdmi_qp_bridge_write_audio_infoframe() and
drop dw_hdmi_qp_config_audio_infoframe().
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Link: https://patch.msgid.link/20260129-dw-hdmi-qp-iframe-v2-5-0157ad05232c@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
Make use of the recently introduced dw_hdmi_qp_write_infoframe() helper
to simplify the writing of the Dynamic Range and Mastering (DRM)
InfoFrame packet header and body registers.
Moreover, since now having dedicated callbacks per InfoFrame type, move
the implementation to dw_hdmi_qp_bridge_write_hdr_drm_infoframe() and
drop dw_hdmi_qp_config_drm_infoframe().
While at it, also discard the unnecessary infoframe size verification,
as well as the redundant disabling of the packet transmission (already
done by the explicit call to the clear callback).
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Link: https://patch.msgid.link/20260129-dw-hdmi-qp-iframe-v2-4-0157ad05232c@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
Make use of the recently introduced dw_hdmi_qp_write_infoframe() helper
to simplify the writing of the Auxiliary Video InfoFrame (AVI) packet
header and body registers.
Moreover, since now having dedicated callbacks per InfoFrame type, move
the implementation to dw_hdmi_qp_bridge_write_avi_infoframe() and drop
dw_hdmi_qp_config_avi_infoframe().
While at it, also discard the superfluous infoframe size verification.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Link: https://patch.msgid.link/20260129-dw-hdmi-qp-iframe-v2-3-0157ad05232c@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
The hardware is capable of sending Source Product Description (SPD)
InfoFrames, hence enable the missing support.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Link: https://patch.msgid.link/20260129-dw-hdmi-qp-iframe-v2-2-0157ad05232c@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
Since commit b626b1a1c9 ("drm/bridge: refactor HDMI InfoFrame
callbacks"), the following warning is generated:
[ 13.654149] rockchip-drm display-subsystem: [drm] HDMI VSI not supported
Add the missing support for sending HDMI Vendor-Specific Infoframes.
Additionally, introduce dw_hdmi_qp_write_{pkt|infoframe}() helpers, as a
prerequisite to rework all dw_hdmi_qp_bridge_write_*_infoframe()
callbacks and get rid of some boilerplate code.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Link: https://patch.msgid.link/20260129-dw-hdmi-qp-iframe-v2-1-0157ad05232c@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
refcounting conversions, and one for the bridge connector following the
HDMI audio reworks.
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCaXshIgAKCRAnX84Zoj2+
diDDAXwJM6Hh0WJL3timIT9gfktjx+lAYPK2hOFhxAvw0rjg2LeDnS40U5X5222j
8fP781YBf0jpvWD2K8QXRIZTCG5JSUYiYnz9aM61x7wJ9k3zpMqLCjPsy8jsm+iS
/O2caHj0bw==
=z19u
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-next-fixes-2026-01-29' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
Two fixes for NULL pointer dereference in imx8 following the bridge
refcounting conversions, and one for the bridge connector following the
HDMI audio reworks.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20260129-efficient-jerboa-of-ecstasy-822832@houat
In preparation for using bridge->next_bridge, we need to ensure that it
will never contain anything but NULL or a valid bridge pointer. Current
code stores an ERR_PTR when imx8qxp_pixel_link_find_next_bridge() errors
out. Instead of fixing that after the facts in the caller, change the
function to internally set pl->next_bridge and just return an int error
value.
No functional changes.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Liu Ying <victor.liu@nxp.com>
Link: https://patch.msgid.link/20260107-drm-bridge-alloc-getput-drm_of_find_bridge-v4-3-a62b4399a6bf@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
The main loop in imx8qxp_pixel_link_find_next_bridge() requires calling
of_node_put() in multiple places, complicating code flow. Simplify it by
using a cleanup action and making the 'remote' variable scope local to the
loop.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Link: https://patch.msgid.link/20260107-drm-bridge-alloc-getput-drm_of_find_bridge-v4-2-a62b4399a6bf@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
imx8qxp_pixel_link_find_next_bridge() uses a sophisticated logic to find
the preferred next bridge, using an array with two supporting index
variables. This is more sophisticated than required because we only ever
need a pointer to the "current" bridge and to the "best so far" bridge.
Additionally this logic is going to make the addition of proper refcounting
quite complex.
Rewrite the logic using two drm_bridge pointers, which is by itself
slightly simpler and is a preparation step for introducing bridge
refcounting in a later commit.
Also reword a comment to make it clearer.
Reviewed-by: Liu Ying <victor.liu@nxp.com>
Link: https://patch.msgid.link/20260107-drm-bridge-alloc-getput-drm_of_find_bridge-v4-1-a62b4399a6bf@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Kernel gfx queues do not need to be reinitialized or
remapped after a reset. Align with gfx11.
v2: preserve init and remap for MMIO case.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Kernel gfx queues do not need to be reinitialized or
remapped after a reset. This fixes queue reset failures
on APUs.
v2: preserve init and remap for MMIO case.
Fixes: b3e9bfd866 ("drm/amdgpu/gfx11: add ring reset callbacks")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4789
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
wptr is a 64 bit value and we need to update the
full value, not just 32 bits. Align with what we
already do for KCQs.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
wptr is a 64 bit value and we need to update the
full value, not just 32 bits. Align with what we
already do for KCQs.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
wptr is a 64 bit value and we need to update the
full value, not just 32 bits. Align with what we
already do for KCQs.
Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MES is enabled by default from gfx11+, use AMDGPU_MQD_SIZE_ALIGN
unconditionally for gfx11+.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Make allocate_mqd consistent with other callbacks.
Prepare for next patch to use mqd_manager->mqd_size.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use AMDGPU_MQD_SIZE_ALIGN for both kernel and user queue.
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: David Belanger <david.belanger@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of returning feature bit mask of allowed features, initialize
the allowed features in the callback implementation itself.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Remove commented and redundant logic in get_allowed_feature_mask
implementation.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of using bitmap operations, add wrapper interface functions to
operate on smu features.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a bitmap struct to represent smu feature bits and functions to set/clear features.
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MES FW uses address(mqd_addr + sizeof(struct mqd) + 3*sizeof(uint32_t))
as fence address and writes a 32 bit fence value to this address. Driver
needs to allocate some extra memory(at least 4 DWs) in addition to
sizeof(struct mqd) as mqd memory(limited to gfx/compute/sdma queue).
For gfx11/12, sizeof(struct mqd) < PAGE_SIZE, KGD allocates mqd memory with
PAGE_SIZE aligned works. For gfx12.1, sizeof(struct mqd) == PAGE_SIZE,
it doesn't work.
KFD mqd manager hardcodes mqd size to PAGE_SIZE/MQD_SIZE across different
IP versions to solve this issue.
To avoid hardcoding in differnet places and across different IP versions.
Let's use AMDGPU_MQD_SIZE_ALIGN instead. It is used in two places.
1. mqd memory alloction
2. mqd stride handling for multi xcc config
v2: Use AMDGPU_GPU_PAGE_ALIGN. (Mukul)
Signed-off-by: Lang Yu <lang.yu@amd.com>
Reviewed-by: David Belanger <david.belanger@amd.com> (v1)
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Mukul Joshi <mukul.joshi@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add validation to ensure user queue sizes meet hardware requirements:
- Size must be a power of two for efficient ring buffer wrapping
- Size must be at least AMDGPU_GPU_PAGE_SIZE to prevent undersized allocations
This prevents invalid configurations that could lead to GPU faults or
unexpected behavior.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jesse Zhang <jesse.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This modifier is primarily intended to be used by panvk to implement
sparse partially-resident images with better map and unmap
performance, and no worse access performance, compared to
implementing them in terms of U-interleaved.
With this modifier, the plane is divided into 64k byte 1:1 or 2:1
-sided tiles. The 64k tiles are laid out linearly. Each 64k tile
is divided into blocks of 16x16 texel blocks each, which themselves
are laid out linearly within a 64k tile. Then within each such
16x16 block, texel blocks are laid out according to U order,
similar to 16X16_BLOCK_U_INTERLEAVED.
Unlike 16X16_BLOCK_U_INTERLEAVED, the layout does not depend on
whether a format is compressed or not.
The hardware features corresponding to this modifier are available
starting with v10 (second gen Valhall.)
The corresponding panvk MR can be found at:
https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/38986
Previous version:
https://lists.freedesktop.org/archives/dri-devel/2026-January/547072.html
No changes since v2
Changes since v1:
* Rewrite the description of the modifier to be hopefully unambiguous.
Signed-off-by: Caterina Shablia <caterina.shablia@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://patch.msgid.link/20260128184058.807213-1-caterina.shablia@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
The EXEC_COUNT field must be > 0. In the gfx shadow
handling we always emit a cond_exec packet after the gfx_shadow
packet, but the EXEC_COUNT never gets patched. This leads
to a hang when we try and reset queues on gfx11 APUs.
Fixes: c68cbbfd54 ("drm/amdgpu: cleanup conditional execution")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4789
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The reference clock is supposed to be 100Mhz, but it
appears to actually be slightly lower (99.81Mhz).
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/14451
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
A trap may occur in the middle of VOP3PX instruction co-issue.
The PC would be restored incorrectly if left unmodified.
Identify this case by examining the instruction opcode and
rewind the PC 8 bytes if it occurs.
Signed-off-by: Jay Cornwall <jay.cornwall@amd.com>
Reviewed-by: Lancelot Six <lancelot.six@amd.com>
Reviewed-by: Vladimir Indic <vladimir.indic@amd.com>
Cc: Shweta Khatri <shweta.khatri@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>