Commit graph

277,199 commits

Author SHA1 Message Date
Senthil Balasubramanian
d1c038d620 ath9k_hw: Fix incorrect baseband PLL phase shift for AR9485
we should program the AR9485 baseband PLL phase shift to 6 and
a redundant setting overwrites the correct value. Remove the
incorrect and unwnated register setting.

Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:17 -04:00
Senthil Balasubramanian
353e5019e0 ath9k: Fix LED gpio for AR93xx chipsets.
The LED gpio is incorrectly programmed for AR9300 and so the led
is not working propelry. AR93xx uses gpio 10 for LED and not the
default.

Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:17 -04:00
Amitkumar Karwar
40db6c77ab cfg80211: module_param to disable HT40 in 2.4GHz band
Currently mac80211 uses ieee80211_disable_40mhz_24ghz module
parameter to allow disabling 40MHz operation in the 2.4GHz band.
Move this handling from mac80211 to cfg80211 so that the feature
will be more generic.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:17 -04:00
Vasanthakumar Thiagarajan
0a6c9b1b66 ath9k: Fix warning: symbol 'ath9k_platform_id_table' was not declared. Should it be static?
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:17 -04:00
Vasanthakumar Thiagarajan
788f6875fc ath9k: Fix bug in configuring hw timer
Hw next tigger time is configured as current_tsf + (timer_period * 10) which
is wrong, it should be current_tsf + timer_period. The wrong hw timer configuration
would cause btcoex related issues.

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:16 -04:00
Johannes Berg
ca45de77ad mac80211: tear down BA sessions properly on suspend
Currently, the code to tear down BA sessions will
execute after queues are stopped, but attempt to
send frames, so those frames will just get queued,
which isn't intended. Move this code to before to
tear down the sessions properly.

Additionally, after stopping queues, flush the TX
queues in the driver driver to make sure all the
frames went out.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:16 -04:00
Nishant Sarmukadam
31d291a769 mwl8k: Enable life time expiry for tx packets in the hardware
Tell the firmware to enable the life time expiry of tx packets
in the hardware. The hardware will now refer to the timestamp
in every tx packet and decide whether the packet needs to be
dropped or transmitted.

Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: Pradeep Nemavat <pnemavat@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:16 -04:00
Nishant Sarmukadam
3a76988879 mwl8k: Reserve buffers for tx management frames
Since queues are not stopped anymore, management frames would be
dropped if the corresponding tx queue is full.
This can cause issues say when we want to setup an ampdu stream and
action frames i.e addba requests keep getting dropped frequently.
Fix this by reserving some buffers to allow management frames to
go through in queue full conditions.

Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: Pradeep Nemavat <pnemavat@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:16 -04:00
Pradeep Nemavat
566875db50 mwl8k: Add timestamp information for tx packets
Timestamp tx packets using a HW micro-second timer.
This timestamp will be compared to the current timestamp
in the hardware and if the difference is greater than 500ms,
the packet will be dropped.

Signed-off-by: Pradeep Nemavat <pnemavat@marvell.com>
Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:16 -04:00
Pradeep Nemavat
3a7dbc3b2a mwl8k: Do not stop tx queues
This is in preparation to support life time expiry of packets in the
hardware to avoid head-of-line blocking where a slow client can
hog a tx queue and affect the traffic to a faster client from the same
queue. Time stamp the packets in driver to allow dropping them in the
hardware if they are queued for more than 500ms.

If queues are stopped, packets will be queued up outside the driver.
Since we will be able to timestamp the packets only after they hit the
driver, the timestamp will be less accurate since we cannot consider
the time the packets spent in queues outside the driver. With this commit,
to achieve accurate timestamping, the tx queues will not be stopped in
normal conditions. The only scenarios where the queues will be stopped are
when firmware commands are executing or if the interface is brought down.
Now, we need to be prepared for a situation where packets hit the driver
even after the tx queues are full. Drop all such packets in the driver itself.

Signed-off-by: Pradeep Nemavat <pnemavat@marvell.com>
Signed-off-by: Nishant Sarmukadam <nishants@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:15 -04:00
Stanislaw Gruszka
2624e96ce1 iwlwifi: fix possible data overwrite in hcmd callback
My commit 3598e1774c
"iwlwifi: fix enqueue hcmd race conditions" move hcmd callback after
command queue reclaim, to avoid call it with hcmd_lock. But since
queue read index was updated, cmd data can be overwritten. Fix problem
by calling callback before taking hcmd_lock and queue reclaim.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:15 -04:00
Rafał Miłecki
9f2e731d1d ssb: cc: add & fix defines
We probably got false positive results for checking PLL being down.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:15 -04:00
Sujith Manoharan
767ad6a0a2 ath9k_htc: Remove unused macros and structures
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:15 -04:00
Sujith Manoharan
c58ca5b508 ath9k_htc: Use power save wrappers when accessing HW
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:14 -04:00
Sujith Manoharan
f0dd49803b ath9k_htc: Fix max A-MPDU size handling
Set the maximum ampdu size of a station correctly
in the target by using the ampdu_factor.

Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:14 -04:00
Sujith Manoharan
3a0593efd1 ath9k_htc: Fix AMPDU subframe handling
* Register the driver's maximum ampdu subframe limit to mac80211.
* Cleanup the target capabilities structure and fix an endian issue.
* Fix BTCOEX by sending a command to the target when the BT priority
  changes.
* Bump the required firmware version to 1.1

Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:14 -04:00
Sujith Manoharan
0ff2b5c05d ath9k: Fix warnings from -Wunused-but-set-variable
Signed-off-by: Sujith Manoharan <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:14 -04:00
Rafał Miłecki
3c35c84a70 ssb: cc: use correct min_msk for 0x4312
Default min_msk on my 0x4312 is 0x80000CBB, not 0xCBB. Now we follow
specs and wl (noticed in MMIO dumps).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:13 -04:00
Rafał Miłecki
9be1cb39c6 ssb: pci: trivial: correct amount of maximum retries
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:13 -04:00
Vasanthakumar Thiagarajan
bca04689a2 ath9k_hw: Enable AR9340 support
AR9340 is a AR9003 family built-in 2x2 wmac of ar934x SOCs. It is single band
in ar9341 SOC and dual band in ar9344/ar9342 SOCs.

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:13 -04:00
Vasanthakumar Thiagarajan
79d1d2b8a3 ath9k_hw: Disable INTR_HOST1_FATAL to avoid interrupt strom with ar9430
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:13 -04:00
Vasanthakumar Thiagarajan
ecb1d385ad ath9k_hw: Assign macversion based on devid for built-in wmac
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:12 -04:00
Vasanthakumar Thiagarajan
247eee0e4e ath9k: Add AR9340 platform id to id table
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:12 -04:00
Vasanthakumar Thiagarajan
5d48ae78cf ath9k_hw: Read iq calibration data only for active chains
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:12 -04:00
Vasanthakumar Thiagarajan
2976bc5ebf ath9k_hw: Configure chain switch table and attenuation control only for active chains
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:12 -04:00
Vasanthakumar Thiagarajan
2be7bfe0b4 ath9k_hw: Enable byte Tx/Rx data swap for AR9340
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:11 -04:00
Vasanthakumar Thiagarajan
a969c09184 ath9k_hw: Configure tuning capacitance value for AR9340 as well
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:11 -04:00
Vasanthakumar Thiagarajan
3594beae70 ath9k_hw: Skip internal regulator configuration for AR9340
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:11 -04:00
Vasanthakumar Thiagarajan
160b7fb4a0 ath9k_hw: Don't configure AR_CH0_THERM for AR9340
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:11 -04:00
Vasanthakumar Thiagarajan
66953d4385 ath9k_hw: Fix register offset AR_PHY_65NM_CH0_THERM for AR9340
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:10 -04:00
Vasanthakumar Thiagarajan
e758ff8f7f ath9k_hw: Clean up rx/tx chain configuration before AGC/IQ cal
Use hw supported chains instead of hard coded values.

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:10 -04:00
Vasanthakumar Thiagarajan
17869f4fe9 ath9k_hw: Configure RF channel freqency for AR9340
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:10 -04:00
Vasanthakumar Thiagarajan
d1395d85fa ath9k_hw: Read spur frequency information from eeprom for AR9340
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:09 -04:00
Vasanthakumar Thiagarajan
d7fd52a80f ath9k_hw: Initialize tx and rx gain table from initvals.h for ar9340
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:09 -04:00
Vasanthakumar Thiagarajan
070c4d509b ath9k_hw: Don't do ani initialization for AR9340
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:09 -04:00
Vasanthakumar Thiagarajan
d89baac8b4 ath9k_hw: Initialize mode registers from initvals.h for AR9340
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:09 -04:00
Vasanthakumar Thiagarajan
9aa5a8d5fd ath9k_hw: Add initvals.h for ar9340
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:09 -04:00
Vasanthakumar Thiagarajan
0b488ac6ec ath9k_hw: Configure pll control register accordingly for AR9340
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:08 -04:00
Vasanthakumar Thiagarajan
f2f5f2a1ce ath9k_hw: Get AHB clock information from ath9k_platform_data
Add a bool in ath9k_platform_data to pass AHB clock speed information.
Driver needs this to configure PLL on some SOCs.

Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:08 -04:00
Vasanthakumar Thiagarajan
35d5f56125 ath9k_hw: Take care of few host interface register changes for AR9340
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:08 -04:00
Vasanthakumar Thiagarajan
b99a7be47d ath9k_hw: Define devid and mac version for AR9340
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-04-25 14:50:07 -04:00
John W. Linville
534f0e2928 Merge branch 'wireless-next-2.6' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-2.6 2011-04-25 14:42:51 -04:00
John W. Linville
e55034e978 Merge branch 'for-linville' of git://git.kernel.org/pub/scm/linux/kernel/git/luca/wl12xx 2011-04-25 14:36:35 -04:00
John W. Linville
cfef6047c4 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
Conflicts:
	drivers/net/wireless/iwlwifi/iwl-core.c
	drivers/net/wireless/rt2x00/rt2x00queue.c
	drivers/net/wireless/rt2x00/rt2x00queue.h
2011-04-25 14:34:25 -04:00
Frederic Weisbecker
e0ac8457d0 sh, hw_breakpoints: Fix racy access to ptrace breakpoints
While the tracer accesses ptrace breakpoints, the child task may
concurrently exit due to a SIGKILL and thus release its breakpoints
at the same time. We can then dereference some freed pointers.

To fix this, hold a reference on the child breakpoints before
manipulating them.

Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1302284067-7860-6-git-send-email-fweisbec@gmail.com
2011-04-25 17:36:12 +02:00
Frederic Weisbecker
bf0b8f4b55 arm, hw_breakpoints: Fix racy access to ptrace breakpoints
While the tracer accesses ptrace breakpoints, the child task may
concurrently exit due to a SIGKILL and thus release its breakpoints
at the same time. We can then dereference some freed pointers.

To fix this, hold a reference on the child breakpoints before
manipulating them.

Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Link: http://lkml.kernel.org/r/1302284067-7860-5-git-send-email-fweisbec@gmail.com
2011-04-25 17:35:18 +02:00
Frederic Weisbecker
07fa7a0a8a powerpc, hw_breakpoints: Fix racy access to ptrace breakpoints
While the tracer accesses ptrace breakpoints, the child task may
concurrently exit due to a SIGKILL and thus release its breakpoints
at the same time. We can then dereference some freed pointers.

To fix this, hold a reference on the child breakpoints before
manipulating them.

Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Acked-by: Prasad <prasad@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: v2.6.33.. <stable@kernel.org>
Link: http://lkml.kernel.org/r/1302284067-7860-4-git-send-email-fweisbec@gmail.com
2011-04-25 17:33:54 +02:00
Frederic Weisbecker
87dc669ba2 x86, hw_breakpoints: Fix racy access to ptrace breakpoints
While the tracer accesses ptrace breakpoints, the child task may
concurrently exit due to a SIGKILL and thus release its breakpoints
at the same time. We can then dereference some freed pointers.

To fix this, hold a reference on the child breakpoints before
manipulating them.

Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: v2.6.33.. <stable@kernel.org>
Link: http://lkml.kernel.org/r/1302284067-7860-3-git-send-email-fweisbec@gmail.com
2011-04-25 17:32:40 +02:00
Frederic Weisbecker
bf26c01849 ptrace: Prepare to fix racy accesses on task breakpoints
When a task is traced and is in a stopped state, the tracer
may execute a ptrace request to examine the tracee state and
get its task struct. Right after, the tracee can be killed
and thus its breakpoints released.
This can happen concurrently when the tracer is in the middle
of reading or modifying these breakpoints, leading to dereferencing
a freed pointer.

Hence, to prepare the fix, create a generic breakpoint reference
holding API. When a reference on the breakpoints of a task is
held, the breakpoints won't be released until the last reference
is dropped. After that, no more ptrace request on the task's
breakpoints can be serviced for the tracer.

Reported-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Prasad <prasad@linux.vnet.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: v2.6.33.. <stable@kernel.org>
Link: http://lkml.kernel.org/r/1302284067-7860-2-git-send-email-fweisbec@gmail.com
2011-04-25 17:28:24 +02:00
Andi Kleen
1c99042974 SECURITY: Move exec_permission RCU checks into security modules
Right now all RCU walks fall back to reference walk when CONFIG_SECURITY
is enabled, even though just the standard capability module is active.
This is because security_inode_exec_permission unconditionally fails
RCU walks.

Move this decision to the low level security module. This requires
passing the RCU flags down the security hook. This way at least
the capability module and a few easy cases in selinux/smack work
with RCU walks with CONFIG_SECURITY=y

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
2011-04-25 10:20:32 -04:00