[ Upstream commit 594163ea88 ]
In ixp4xx_get_ts_info() ixp46x_ptp_find() is called
unconditionally despite this feature only existing on
ixp46x, leading to the following splat from tcpdump:
root@OpenWrt:~# tcpdump -vv -X -i eth0
(...)
Unable to handle kernel NULL pointer dereference at virtual address
00000238 when read
(...)
Call trace:
ptp_clock_index from ixp46x_ptp_find+0x1c/0x38
ixp46x_ptp_find from ixp4xx_get_ts_info+0x4c/0x64
ixp4xx_get_ts_info from __ethtool_get_ts_info+0x90/0x108
__ethtool_get_ts_info from __dev_ethtool+0xa00/0x2648
__dev_ethtool from dev_ethtool+0x160/0x234
dev_ethtool from dev_ioctl+0x2cc/0x460
dev_ioctl from sock_ioctl+0x1ec/0x524
sock_ioctl from sys_ioctl+0x51c/0xa94
sys_ioctl from ret_fast_syscall+0x0/0x44
(...)
Segmentation fault
Check for ixp46x in ixp46x_ptp_find() before trying to set up
PTP to avoid this.
To avoid altering the returned error code from ixp4xx_hwtstamp_set()
which before this patch was -EOPNOTSUPP, we return -EOPNOTSUPP
from ixp4xx_hwtstamp_set() if ixp46x_ptp_find() fails no matter
the error code. The helper function ixp46x_ptp_find() helper
returns -ENODEV.
Fixes: 9055a2f591 ("ixp4xx_eth: make ptp support a platform driver")
Signed-off-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/20260219-ixp4xx-fix-ethernet-v3-1-f235ccc3cd46@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2bb995e615 ]
The GPIO get callback is expected to return 0 or 1 (or a negative error
code). Ensure that the value returned by qca807x_gpio_get() is
normalized to the [0, 1] range.
Fixes: 86ef402d80 ("gpiolib: sanitize the return value of gpio_chip::get()")
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Link: https://patch.msgid.link/aZZeyr2ysqqk2GqA@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f1e2f0ce70 ]
The LAN7801 is designed exclusively for external PHYs (unlike the
LAN7800/LAN7850 which have internal PHYs), but lan78xx_mdio_init()
restricts PHY scanning to MDIO addresses 0-7 by setting phy_mask to
~(0xFF). This prevents discovery of external PHYs wired to addresses
outside that range.
One such case is the DP83TC814 100BASE-T1 PHY, which is typically
configured at MDIO address 10 via PHYAD bootstrap pins and goes
undetected with the current mask.
Remove the restrictive phy_mask assignment for the LAN7801 so that the
default mask of 0 applies, allowing all 32 MDIO addresses to be
scanned during bus registration.
Fixes: 02dc1f3d61 ("lan78xx: add LAN7801 MAC only support")
Signed-off-by: Martin Pålsson <martin@poleshift.se>
Link: https://patch.msgid.link/0110019c6f388aff-98d99cf0-4425-4fff-b16b-dea5ad8fafe0-000000@eu-north-1.amazonses.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64868f5eca ]
kaweth_set_rx_mode(), the ndo_set_rx_mode callback, calls
netif_stop_queue() and netif_wake_queue(). These are TX queue flow
control functions unrelated to RX multicast configuration.
The premature netif_wake_queue() can re-enable TX while tx_urb is still
in-flight, leading to a double usb_submit_urb() on the same URB:
kaweth_start_xmit() {
netif_stop_queue();
usb_submit_urb(kaweth->tx_urb);
}
kaweth_set_rx_mode() {
netif_stop_queue();
netif_wake_queue(); // wakes TX queue before URB is done
}
kaweth_start_xmit() {
netif_stop_queue();
usb_submit_urb(kaweth->tx_urb); // URB submitted while active
}
This triggers the WARN in usb_submit_urb():
"URB submitted while active"
This is a similar class of bug fixed in rtl8150 by
- commit 958baf5eae ("net: usb: Remove disruptive netif_wake_queue in rtl8150_set_multicast").
Also kaweth_set_rx_mode() is already functionally broken, the
real set_rx_mode action is performed by kaweth_async_set_rx_mode(),
which in turn is not a no-op only at ndo_open() time.
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Link: https://patch.msgid.link/20260217175012.1234494-1-n7l8m4@u.northwestern.edu
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1512c1db9 ]
This issue was discovered during a code audit.
After cancel_work_sync() is called from espintcp_close(),
espintcp_tx_work() can still be scheduled from paths such as
the Delayed ACK handler or ksoftirqd.
As a result, the espintcp_tx_work() worker may dereference a
freed espintcp ctx or sk.
The following is a simple race scenario:
cpu0 cpu1
espintcp_close()
cancel_work_sync(&ctx->work);
espintcp_write_space()
schedule_work(&ctx->work);
To prevent this race condition, cancel_work_sync() is
replaced with disable_work_sync().
Fixes: e27cca96cd ("xfrm: add espintcp (RFC 8229)")
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/aZSie7rEdh9Nu0eM@v4bel
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f891007ab1 ]
udp_flow_src_port() is indirectly using sk->sk_txhash as a base,
because __tcp_transmit_skb() uses skb_set_hash_from_sk().
This is problematic because this field can change over the
lifetime of a TCP flow, thanks to calls to sk_rethink_txhash().
Problem is that some NIC might (ab)use the PSP UDP source port in their
RSS computation, and PSP packets for a given flow could jump
from one queue to another.
In order to avoid surprises, it is safer to let Protective Load
Balancing (PLB) get its entropy from the IPv6 flowlabel,
and change psp_write_headers() to use sk->sk_hash which
does not change for the duration of the flow.
We might add a sysctl to select the behavior, if there
is a need for it.
Fixes: fc72451574 ("psp: provide encapsulation helper for drivers")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-By: Daniel Zahka <daniel.zahka@gmail.com>
Link: https://patch.msgid.link/20260218141337.999945-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 858d2a4f67 ]
Code in tcp_v6_syn_recv_sock() after the call to tcp_v4_syn_recv_sock()
is done too late.
After tcp_v4_syn_recv_sock(), the child socket is already visible
from TCP ehash table and other cpus might use it.
Since newinet->pinet6 is still pointing to the listener ipv6_pinfo
bad things can happen as syzbot found.
Move the problematic code in tcp_v6_mapped_child_init()
and call this new helper from tcp_v4_syn_recv_sock() before
the ehash insertion.
This allows the removal of one tcp_sync_mss(), since
tcp_v4_syn_recv_sock() will call it with the correct
context.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: syzbot+937b5bbb6a815b3e5d0b@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/69949275.050a0220.2eeac1.0145.GAE@google.com/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20260217161205.2079883-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1c17f4373d ]
In {tcp6,udp6,raw6}_sock, struct ipv6_pinfo is always placed at
the beginning of a new cache line because
1. __alignof__(struct tcp_sock) is 64 due to ____cacheline_aligned
of __cacheline_group_begin(tcp_sock_write_tx)
2. __alignof__(struct udp_sock) is 64 due to ____cacheline_aligned
of struct numa_drop_counters
3. in raw6_sock, struct numa_drop_counters is placed before
struct ipv6_pinfo
. struct ipv6_pinfo is 136 bytes, but the last cache line is
only used by ipv6_fl_list:
$ pahole -C ipv6_pinfo vmlinux
struct ipv6_pinfo {
...
/* --- cacheline 2 boundary (128 bytes) --- */
struct ipv6_fl_socklist * ipv6_fl_list; /* 128 8 */
/* size: 136, cachelines: 3, members: 23 */
Let's move ipv6_fl_list from struct ipv6_pinfo to struct inet_sock
to save a full cache line for {tcp6,udp6,raw6}_sock.
Now, struct ipv6_pinfo is 128 bytes, and {tcp6,udp6,raw6}_sock have
64 bytes less, while {tcp,udp,raw}_sock retain the same size.
Before:
# grep -E "^(RAW|UDP[^L\-]|TCP)" /proc/slabinfo | awk '{print $1, "\t", $4}'
RAWv6 1408
UDPv6 1472
TCPv6 2560
RAW 1152
UDP 1280
TCP 2368
After:
# grep -E "^(RAW|UDP[^L\-]|TCP)" /proc/slabinfo | awk '{print $1, "\t", $4}'
RAWv6 1344
UDPv6 1408
TCPv6 2496
RAW 1152
UDP 1280
TCP 2368
Also, ipv6_fl_list and inet_flags (SNDFLOW bit) are placed in the
same cache line.
$ pahole -C inet_sock vmlinux
...
/* --- cacheline 11 boundary (704 bytes) was 56 bytes ago --- */
struct ipv6_pinfo * pinet6; /* 760 8 */
/* --- cacheline 12 boundary (768 bytes) --- */
struct ipv6_fl_socklist * ipv6_fl_list; /* 768 8 */
unsigned long inet_flags; /* 776 8 */
Doc churn is due to the insufficient Type column (only 1 space short).
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20251014224210.2964778-1-kuniyu@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 858d2a4f67 ("tcp: fix potential race in tcp_v6_syn_recv_sock()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4efa91a285 ]
syzbot is reporting that "struct xfrm_state" refcount is leaking.
unregister_netdevice: waiting for netdevsim0 to become free. Usage count = 2
ref_tracker: netdev@ffff888052f24618 has 1/1 users at
__netdev_tracker_alloc include/linux/netdevice.h:4400 [inline]
netdev_tracker_alloc include/linux/netdevice.h:4412 [inline]
xfrm_dev_state_add+0x3a5/0x1080 net/xfrm/xfrm_device.c:316
xfrm_state_construct net/xfrm/xfrm_user.c:986 [inline]
xfrm_add_sa+0x34ff/0x5fa0 net/xfrm/xfrm_user.c:1022
xfrm_user_rcv_msg+0x58e/0xc00 net/xfrm/xfrm_user.c:3507
netlink_rcv_skb+0x158/0x420 net/netlink/af_netlink.c:2550
xfrm_netlink_rcv+0x71/0x90 net/xfrm/xfrm_user.c:3529
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x5aa/0x870 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x8c8/0xdd0 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg net/socket.c:742 [inline]
____sys_sendmsg+0xa5d/0xc30 net/socket.c:2592
___sys_sendmsg+0x134/0x1d0 net/socket.c:2646
__sys_sendmsg+0x16d/0x220 net/socket.c:2678
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
This is because commit d77e38e612 ("xfrm: Add an IPsec hardware
offloading API") implemented xfrm_dev_unregister() as no-op despite
xfrm_dev_state_add() from xfrm_state_construct() acquires a reference
to "struct net_device".
I guess that that commit expected that NETDEV_DOWN event is fired before
NETDEV_UNREGISTER event fires, and also assumed that xfrm_dev_state_add()
is called only if (dev->features & NETIF_F_HW_ESP) != 0.
Sabrina Dubroca identified steps to reproduce the same symptoms as below.
echo 0 > /sys/bus/netdevsim/new_device
dev=$(ls -1 /sys/bus/netdevsim/devices/netdevsim0/net/)
ip xfrm state add src 192.168.13.1 dst 192.168.13.2 proto esp \
spi 0x1000 mode tunnel aead 'rfc4106(gcm(aes))' $key 128 \
offload crypto dev $dev dir out
ethtool -K $dev esp-hw-offload off
echo 0 > /sys/bus/netdevsim/del_device
Like these steps indicate, the NETIF_F_HW_ESP bit can be cleared after
xfrm_dev_state_add() acquired a reference to "struct net_device".
Also, xfrm_dev_state_add() does not check for the NETIF_F_HW_ESP bit
when acquiring a reference to "struct net_device".
Commit 03891f820c ("xfrm: handle NETDEV_UNREGISTER for xfrm device")
re-introduced the NETDEV_UNREGISTER event to xfrm_dev_event(), but that
commit for unknown reason chose to share xfrm_dev_down() between the
NETDEV_DOWN event and the NETDEV_UNREGISTER event.
I guess that that commit missed the behavior in the previous paragraph.
Therefore, we need to re-introduce xfrm_dev_unregister() in order to
release the reference to "struct net_device" by unconditionally flushing
state and policy.
Reported-by: syzbot+881d65229ca4f9ae8c84@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=881d65229ca4f9ae8c84
Fixes: d77e38e612 ("xfrm: Add an IPsec hardware offloading API")
Cc: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f235ccecd ]
IPMB doesn't use i2c reads, but the handler needs to set a value.
Otherwise an i2c read will return an uninitialised value from the bus
driver.
Fixes: 63c4eb3471 ("ipmi:ipmb: Add initial support for IPMI over IPMB")
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Message-ID: <20260113-ipmb-read-init-v1-1-a9cbce7b94e3@codeconstruct.com.au>
Signed-off-by: Corey Minyard <corey@minyard.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a4524bc69 ]
In packet offload, hardware is responsible to check templates. The
result of its operation is forwarded through secpath by relevant
drivers. That secpath is actually removed in __xfrm_policy_check2().
In case packet is forwarded, this secpath is reset in RX, but pushed
again to TX where policy is rechecked again against dummy secpath
in xfrm_policy_ok().
Such situation causes to unexpected XfrmInTmplMismatch increase.
As a solution, simply skip template mismatch check.
Fixes: 600258d555 ("xfrm: delete intermediate secpath entry in packet offload mode")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Jianbo Liu <jianbol@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1799d8abea ]
xfrm6_get_saddr() does not check the return value of
ipv6_dev_get_saddr(). When ipv6_dev_get_saddr() fails to find a suitable
source address (returns -EADDRNOTAVAIL), saddr->in6 is left
uninitialized, but xfrm6_get_saddr() still returns 0 (success).
This causes the caller xfrm_tmpl_resolve_one() to use the uninitialized
address in xfrm_state_find(), triggering KMSAN warning:
=====================================================
BUG: KMSAN: uninit-value in xfrm_state_find+0x2424/0xa940
xfrm_state_find+0x2424/0xa940
xfrm_resolve_and_create_bundle+0x906/0x5a20
xfrm_lookup_with_ifid+0xcc0/0x3770
xfrm_lookup_route+0x63/0x2b0
ip_route_output_flow+0x1ce/0x270
udp_sendmsg+0x2ce1/0x3400
inet_sendmsg+0x1ef/0x2a0
__sock_sendmsg+0x278/0x3d0
__sys_sendto+0x593/0x720
__x64_sys_sendto+0x130/0x200
x64_sys_call+0x332b/0x3e70
do_syscall_64+0xd3/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Local variable tmp.i.i created at:
xfrm_resolve_and_create_bundle+0x3e3/0x5a20
xfrm_lookup_with_ifid+0xcc0/0x3770
=====================================================
Fix by checking the return value of ipv6_dev_get_saddr() and propagating
the error.
Fixes: a1e59abf82 ("[XFRM]: Fix wildcard as tunnel source")
Reported-by: syzbot+e136d86d34b42399a8b1@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/68bf1024.a70a0220.7a912.02c2.GAE@google.com/T/
Signed-off-by: Jiayuan Chen <jiayuan.chen@shopee.com>
Signed-off-by: Jiayuan Chen <jiayuan.chen@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e249c4841 ]
With concurrent TLB invalidations, completion wait randomly gets timed out
because cmd_sem_val was incremented outside the IOMMU spinlock, allowing
CMD_COMPL_WAIT commands to be queued out of sequence and breaking the
ordering assumption in wait_on_sem().
Move the cmd_sem_val increment under iommu->lock so completion sequence
allocation is serialized with command queuing.
And remove the unnecessary return.
Fixes: d2a0cac105 ("iommu/amd: move wait_on_sem() out of spinlock")
Tested-by: Srikanth Aithal <sraithal@amd.com>
Reported-by: Srikanth Aithal <sraithal@amd.com>
Signed-off-by: Ankit Soni <Ankit.Soni@amd.com>
Reviewed-by: Vasant Hegde <vasant.hegde@amd.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 186615f885 ]
Number of MW LUTs depends on NTB configuration and can be set to zero,
in such scenario rounddown_pow_of_two will cause undefined behaviour and
should not be performed.
This patch ensures that rounddown_pow_of_two is called on valid value.
Signed-off-by: Maciej Grochowski <Maciej.Grochowski@sony.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8ba7ad2cc ]
Number of MW LUTs depends on NTB configuration and can be set to MAX_MWS,
This patch protects against invalid index out of bounds access to mw_sizes
When invalid access print message to user that configuration is not valid.
Signed-off-by: Maciej Grochowski <Maciej.Grochowski@sony.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2724fb4d42 ]
Fix calibration value in case a clock reference is provided.
The actual calibration value written into register is
frequency - 1.
Reviewed-by: Harini T <harini.t@amd.com>
Tested-by: Harini T <harini.t@amd.com>
Signed-off-by: Tomas Melin <tomas.melin@vaisala.com>
Acked-by: Michal Simek <michal.simek@amd.com>
Link: https://patch.msgid.link/20260122-zynqmp-rtc-updates-v4-1-d4edb966b499@vaisala.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5cc7bbd9f1 ]
sdma ring reset is not supported in SRIOV. kfd driver does not check
reset mask, and could queue sdma ring reset during unmap_queues_cpsch.
Avoid the ring reset for sriov.
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b38a87b8f ]
[Why]
Shaper programming has high chance to fail on first time after
power-on or reboot. This can be verified by running IGT's kms_colorop.
[How]
Always power on the shaper and 3DLUT before programming by
removing the debug flag of low power mode.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 729a2e8e9a ]
gcc-16 warns about an instance that older compilers did not:
arch/arm64/mm/hugetlbpage.c: In function 'huge_pte_clear':
arch/arm64/mm/hugetlbpage.c:369:57: error: parameter 'addr' set but not used [-Werror=unused-but-set-parameter=]
The issue here is that __pte_clear() does not actually use its second
argument, but when CONFIG_ARM64_CONTPTE is enabled it still gets
updated.
Replace the macro with an inline function to let the compiler see
the argument getting passed down.
Suggested-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dev Jain <dev.jain@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d649c58bca ]
Depending on the timing during boot, the BIOS might report wrong pin
capabilities, which can lead to HDMI audio being disabled. Therefore,
force HDMI audio connection on TUXEDO InfinityBook S 14 Gen6.
Signed-off-by: Aaron Erhardt <aer@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Link: https://patch.msgid.link/20260218213234.429686-1-wse@tuxedocomputers.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3acf517e1a ]
This patch adds a quirk to include the codec amplifier function for Lenovo
models listed in the quirk table.
Note: In these models, the RT722 codec amplifier is excluded, and an
external amplifier is used instead.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://patch.msgid.link/20260218104734.3641481-3-Vijendar.Mukunda@amd.com
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be6324a809 ]
We search with offset (u64)-1 which should never match exactly.
Previously this was handled with BUG(). Now logs an error
and return -EUCLEAN.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Adarsh Das <adarshdas950@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fba2105a15 ]
At silencing the playback URB packets in the implicit fb mode before
the actual playback, we blindly assume that the received packets fit
with the buffer size. But when the setup in the capture stream
differs from the playback stream (e.g. due to the USB core limitation
of max packet size), such an inconsistency may lead to OOB writes to
the buffer, resulting in a crash.
For addressing it, add a sanity check of the transfer buffer size at
prepare_silent_urb(), and stop the data copy if the received data
overflows. Also, report back the transfer error properly from there,
too.
Note that this doesn't fix the root cause of the playback error
itself, but this merely covers the kernel Oops.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=221076
Link: https://patch.msgid.link/20260216141209.1849200-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 908d318f23 ]
This patch limits the clock speeds of the AMD Radeon R5 M420 GPU from
850/1000MHz (core/memory) to 800/950 MHz, making it work stably. This
patch is for radeon.
Signed-off-by: decce6 <decce6@proton.me>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 40534d19ed ]
The spidev driver previously used two mutexes, spi_lock and buf_lock,
but acquired them in different orders depending on the code path:
write()/read(): buf_lock -> spi_lock
ioctl(): spi_lock -> buf_lock
This AB-BA locking pattern triggers lockdep warnings and can
cause real deadlocks:
WARNING: possible circular locking dependency detected
spidev_ioctl() -> mutex_lock(&spidev->buf_lock)
spidev_sync_write() -> mutex_lock(&spidev->spi_lock)
*** DEADLOCK ***
The issue is reproducible with a simple userspace program that
performs write() and SPI_IOC_WR_MAX_SPEED_HZ ioctl() calls from
separate threads on the same spidev file descriptor.
Fix this by simplifying the locking model and removing the lock
inversion entirely. spidev_sync() no longer performs any locking,
and all callers serialize access using spi_lock.
buf_lock is removed since its functionality is fully covered by
spi_lock, eliminating the possibility of lock ordering issues.
This removes the lock inversion and prevents deadlocks without
changing userspace ABI or behaviour.
Signed-off-by: Fabian Godehardt <fg@emlix.com>
Link: https://patch.msgid.link/20260211072616.489522-1-fg@emlix.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d9ec9dc20 ]
[Why]
For RGB BT2020 full and limited color spaces, overlay adjustments were
applied twice (once by MM and once by DAL). This results in incorrect
colours and a noticeable difference between mpo and non-mpo cases.
[How]
Add RGB BT2020 full and limited color spaces to list that bypasses post
csc adjustment.
Reviewed-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Clay King <clayking@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 49fe2c57bd ]
This patch limits the clock speeds of the AMD Radeon R5 M420 GPU from
850/1000MHz (core/memory) to 800/950 MHz, making it work stably. This
patch is for amdgpu.
Signed-off-by: decce6 <decce6@proton.me>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf044e4419 ]
At receiving the packets from the implicit feedback source, we didn't
update ctx->packets field but only the ctx->packet_size[] data.
In exceptional cases, this might lead to unexpectedly superfluous data
transfer (although this won't happen usually due to the nature of USB
isochronous transfer). Fix it to update the field properly.
Link: https://patch.msgid.link/20260216141209.1849200-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91062e119b ]
The ASUS Zenbook 14 UX3405MA uses an ALC294 codec with CS35L41
amplifiers over SPI. The existing quirk for this model only configured
the amplifiers, leaving the headset microphone on the combo jack
non-functional.
Introduce a new fixup that configures pin 0x19 as headset mic input
and chains to ALC245_FIXUP_CS35L41_SPI_2 to preserve speaker
functionality.
Similar to the fix done for the UM3406HA in commit 018f659753
("ALSA: hda/realtek: Fix headset mic on ASUS Zenbook 14").
Signed-off-by: Erik Sanjaya <sirreidlos@gmail.com>
Link: https://patch.msgid.link/20260217102112.20651-1-sirreidlos@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ee1c72606 ]
Tune the sleep interval in the PSP fence wait loop from 10-100us to
60-100us.This adjustment results in an overall wait window of 1.2s
(60us * 20000 iterations) to 2 seconds (100us * 20000 iterations),
which guarantees that we can retrieve the correct fence value
Signed-off-by: Ce Sun <cesun102@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 044f8d3b1f ]
end the function flow when ras table checksum is error
Signed-off-by: Gangliang Xie <ganglxie@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Reviewed-by: Kent Russell <kent.russell@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a38ded4bc ]
[Why & How]
Although it's dummy updates of surface update for committing stream
updates, we should not have dummy_updates[j].surface all indicating
to the same surface under multiple surfaces case. Otherwise,
copy_surface_update_to_plane() in update_planes_and_stream_state()
will update to the same surface only.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Wayne Lin <Wayne.Lin@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64c94cd9be ]
[Why]
System will try to apply idle power optimizations setting during
system resume. But system power state is still in D3 state, and
it will cause the idle power optimizations command not actually
to be sent to DMUB and cause some platforms to go into IPS.
[How]
Set power state to D0 first before calling the
dc_dmub_srv_apply_idle_power_optimizations(dm->dc, false)
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 908ef80e31 ]
In the SPI driver probe, the device should be in the default state, so the
device status check is not necessary. It should be forced to do the
firmware download as I2C device.
Signed-off-by: Baojun Xu <baojun.xu@ti.com>
Link: https://patch.msgid.link/20260211030946.2330-1-baojun.xu@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e243cdd87b ]
When creating the regulator object, associated with a consumer device,
the supply_name is string formatted into a statically sized buffer on
the stack, then strdup()'ed onto the heap.
Not only is the dance on the stack unnecessary, but when the device's
name is long we might not fit the constructed supply_name in the fixed
64 byte buffer on the stack.
One such case can be seen on the Qualcomm Rb3Gen2 board, where we find a
PCIe controller, with a PCIe switch, with a USB controller, with a USB
hub, consuming a regulator. In this example the dev->kobj.name itself is
62 characters long.
Drop the temporary buffer on the stack and kasprintf() the string
directly on the heap, both to simplify the code, and to remove the
length limitation.
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Link: https://patch.msgid.link/20260211-regulator-supply-name-length-v1-1-3875541c1576@oss.qualcomm.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5578da7d95 ]
Add related HP-JD settings to fix issue of fail to detect
OMTP jack type.
Signed-off-by: Jack Yu <jack.yu@realtek.com>
Link: https://patch.msgid.link/20260210074335.2337830-1-jack.yu@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2b4246153e ]
While unhooking from the irqfd waitqueue, clear the internal eventfd
counter by using eventfd_ctx_remove_wait_queue() instead of
remove_wait_queue(), preventing potential spurious interrupts. This
removes the need to store a pointer into the workqueue, as the eventfd
already keeps track of it.
This mimicks what other similar subsystems do on their equivalent paths
with their irqfds (KVM, Xen, ACRN support, etc).
Signed-off-by: Carlos López <clopez@suse.de>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ef84a3075 ]
[WHAT]
1. Set no scaling for writeback as they are hardcoded in DCN3.2+.
2. Set no fast plane update for writeback commits.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 012ea376a5 ]
Restricted pointers ("%pK") were never meant to be used
through printk(). They can acquire sleeping locks in atomic contexts.
Switch to %px over the more secure %p as this usage is a debugging aid,
gated behind CONFIG_DEBUG_VIRTUAL and used by WARN().
Link: https://lore.kernel.org/lkml/20250113171731-dc10e3c1-da64-4af0-b767-7c7070468023@linutronix.de/
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4edd4ba71c ]
Musl defines its own struct ethhdr and thus defines __UAPI_DEF_ETHHDR to
zero. To avoid struct redefinition errors, user space is therefore
supposed to include netinet/if_ether.h before (or instead of)
linux/if_ether.h. To relieve them from this burden, include the libc
header here if not building for kernel space.
Reported-by: Alyssa Ross <hi@alyssa.is>
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8c9753028 ]
The PWM2 on YB1-X90 tablets is used for keyboard backlight control but
it is disabled in the ACPI DSDT table. Add it to the override_status_ids
list to allow keyboard function control driver
(drivers/platform/x86/lenovo/yogabook.c) to use it.
Signed-off-by: Yauhen Kharuzhy <jekhor@gmail.com>
Link: https://patch.msgid.link/20260211222242.4101162-1-jekhor@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15176b818e ]
When DLVR sysfs group creation fails in proc_thermal_rfim_add(),
the function returns immediately without cleaning up the FIVR group
that may have been created earlier.
Add proper error unwinding to remove the FIVR group before returning
failure.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/LV3PR11MB876881B77D32A2854AD2908EF563A@LV3PR11MB8768.namprd11.prod.outlook.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac431d597a ]
When decoding the key, verify that the key material would fit into
a fixed-size buffer in process_auth_done() and generally has a sane
length.
The new CEPH_MAX_KEY_LEN check replaces the existing check for a key
with no key material which is a) not universal since CEPH_CRYPTO_NONE
has to be excluded and b) doesn't provide much value since a smaller
than needed key is just as invalid as no key -- this has to be handled
elsewhere anyway.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 305ff6b3a0 ]
The ceph_uninline_data function was missing proper snapshot context
handling for its OSD write operations. Both CEPH_OSD_OP_CREATE and
CEPH_OSD_OP_WRITE requests were passing NULL instead of the appropriate
snapshot context, which could lead to unnecessary object clone.
Reproducer:
../src/vstart.sh --new -x --localhost --bluestore
// turn on cephfs inline data
./bin/ceph fs set a inline_data true --yes-i-really-really-mean-it
// allow fs_a client to take snapshot
./bin/ceph auth caps client.fs_a mds 'allow rwps fsname=a' mon 'allow r fsname=a' osd 'allow rw tag cephfs data=a'
// mount cephfs with fuse, since kernel cephfs doesn't support inline write
ceph-fuse --id fs_a -m 127.0.0.1:40318 --conf ceph.conf -d /mnt/mycephfs/
// bump snapshot seq
mkdir /mnt/mycephfs/.snap/snap1
echo "foo" > /mnt/mycephfs/test
// umount and mount it again using kernel cephfs client
umount /mnt/mycephfs
mount -t ceph fs_a@.a=/ /mnt/mycephfs/ -o conf=./ceph.conf
echo "bar" >> /mnt/mycephfs/test
./bin/rados listsnaps -p cephfs.a.data $(printf "%x\n" $(stat -c %i /mnt/mycephfs/test)).00000000
will see this object does unnecessary clone
1000000000a.00000000 (seq:2):
cloneid snaps size overlap
2 2 4 []
head - 8
but it's expected to see
10000000000.00000000 (seq:2):
cloneid snaps size overlap
head - 8
since there's no snapshot between these 2 writes
clone happened because the first osd request CEPH_OSD_OP_CREATE doesn't
pass snap context so object is created with snap seq 0, but later data
writeback is equipped with snapshot context.
snap.seq(1) > object snap seq(0), so osd does object clone.
This fix properly acquiring the snapshot context before performing
write operations.
Signed-off-by: ethanwu <ethanwu@synology.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Tested-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5226b96c0 ]
When ntfs_read_run_nb_ra() is invoked with run == NULL the code later
assumes run is valid and may call run_get_entry(NULL, ...), and also
uses clen/idx without initializing them. Smatch reported uninitialized
variable warnings and this can lead to undefined behaviour. This patch
fixes it.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202512230646.v5hrYXL0-lkp@intel.com/
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08ce2fee1b ]
Syzbot reported a circular locking dependency between wnd->rw_lock
(sbi->used.bitmap) and ni->file.run_lock.
The deadlock scenario:
1. ntfs_extend_mft() takes ni->file.run_lock then wnd->rw_lock.
2. run_unpack_ex() takes wnd->rw_lock then tries to acquire
ni->file.run_lock inside ntfs_refresh_zone().
This creates an AB-BA deadlock.
Fix this by using down_read_trylock() instead of down_read() when
acquiring run_lock in run_unpack_ex(). If the lock is contended,
skip ntfs_refresh_zone() - the MFT zone will be refreshed on the
next MFT operation. This breaks the circular dependency since we
never block waiting for run_lock while holding wnd->rw_lock.
Reported-by: syzbot+d27edf9f96ae85939222@syzkaller.appspotmail.com
Tested-by: syzbot+d27edf9f96ae85939222@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=d27edf9f96ae85939222
Signed-off-by: Szymon Wilczek <swilczek.lx@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a6aba7f3c ]
Do not keep preallocated clusters for sparsed and compressed files.
Preserving preallocation in these cases causes fsx failures when running
with sparse files and preallocation enabled.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06909b2549 ]
We found an infinite loop bug in the ntfs3 file system that can lead to a
Denial-of-Service (DoS) condition.
A malformed NTFS image can cause an infinite loop when an ATTR_LIST attribute
indicates a zero data size while the driver allocates memory for it.
When ntfs_load_attr_list() processes a resident ATTR_LIST with data_size set
to zero, it still allocates memory because of al_aligned(0). This creates an
inconsistent state where ni->attr_list.size is zero, but ni->attr_list.le is
non-null. This causes ni_enum_attr_ex to incorrectly assume that no attribute
list exists and enumerates only the primary MFT record. When it finds
ATTR_LIST, the code reloads it and restarts the enumeration, repeating
indefinitely. The mount operation never completes, hanging the kernel thread.
This patch adds validation to ensure that data_size is non-zero before memory
allocation. When a zero-sized ATTR_LIST is detected, the function returns
-EINVAL, preventing a DoS vulnerability.
Co-developed-by: Seunghun Han <kkamagui@gmail.com>
Signed-off-by: Seunghun Han <kkamagui@gmail.com>
Co-developed-by: Jihoon Kwon <kjh010315@gmail.com>
Signed-off-by: Jihoon Kwon <kjh010315@gmail.com>
Signed-off-by: Jaehun Gou <p22gone@gmail.com>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
