Acer Iconia Talk S A1-724 uses KTD2026 LED driver. However, there is
no blue LED on it. Add it to the device tree.
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231017125848.84311-1-raymondhackley@protonmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
IPQ6018 comes in multiple SKU-s and some of them dont support all of the
OPP-s that are current set, so lets utilize CPUFreq NVMEM to allow only
supported OPP-s based on the SoC dynamically.
As an example, IPQ6018 is generaly rated at 1.8GHz but some silicon only
goes up to 1.5GHz and is marked as such via an eFuse.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231021120048.231239-1-robimarko@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This dts adds support for Huawei Honor 5X / GR5 (2016) smartphone
released in 2015.
Add device tree with initial support for:
- GPIO keys
- Hall sensor
- SDHCI (internal and external storage)
- WCNSS (BT/WIFI)
- Sensors (accelerometer and proximity)
- Vibrator
- Touchscreen
Signed-off-by: Raymond Hackley <raymondhackley@protonmail.com>
Signed-off-by: Lukas Walter <lukas.walter@aceart.de>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231021143025.77088-2-lukas.walter@aceart.de
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Use the qcom,domain property instead of the deprecated qcom,apr-domain,
which in turn also fixes a bunch of dtbs_checks warnings.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20231125-msm8953-misc-fixes-v2-2-df86655841d9@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The RB1 platform doesn't have board-specific board-id programmed, it uses
generic 0xff. Thus add the property with the 'variant' of the
calibration data.
Note: the driver will check for the calibration data for the following
IDs, so existing board-2.bin files will continue to work.
- 'bus=snoc,qmi-board-id=ff,qmi-chip-id=120,variant=Thundercomm_RB1'
- 'bus=snoc,qmi-board-id=ff,qmi-chip-id=120'
- 'bus=snoc,qmi-board-id=ff'
For the reference, the board is identified by the driver in the
following way:
ath10k_snoc c800000.wifi: qmi chip_id 0x120 chip_family 0x4007 board_id 0xff soc_id 0x40670000
ath10k_snoc c800000.wifi: qmi fw_version 0x337302d3 fw_build_timestamp 2023-01-06 01:50 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.3.3.7.c2-00723-QCAHLSWMTPLZ-1
ath10k_snoc c800000.wifi: wcn3990 hw1.0 target 0x00000008 chip_id 0x00000000 sub 0000:0000
ath10k_snoc c800000.wifi: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
ath10k_snoc c800000.wifi: firmware ver api 5 features wowlan,mgmt-tx-by-reference,non-bmi crc32 b3d4b790
ath10k_snoc c800000.wifi: htt-ver 3.114 wmi-op 4 htt-op 3 cal file max-sta 32 raw 0 hwcrypto 1
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231125-topic-rb1_feat-v3-12-4cbb567743bb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the required nodes to support display output via the HDMI port.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231125-topic-rb1_feat-v3-10-4cbb567743bb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
MDSS, aside from the MDP-MEM path, also requires the CPU-DISP_CFG one.
Failing to provide it may result in register accesses failing and that's
never good.
Add the missing path.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231125-topic-rb1_feat-v3-7-4cbb567743bb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
MDSS, aside from the MDP-MEM path, also requires the CPU-DISP_CFG one.
Failing to provide it may result in register accesses failing and that's
never good.
Add the missing path.
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231125-topic-rb1_feat-v3-6-4cbb567743bb@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add type-c node to feature otg function and set usb-role-switch property
for usb_1_dwc3 to enable usb otg.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20231126022849.14273-2-lujianhua000@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
There are two typos in this dtsi, so fix it.
classis -> chassis.
80700000 -> 80600000
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Jianhua Lu <lujianhua000@gmail.com>
Link: https://lore.kernel.org/r/20231126022849.14273-1-lujianhua000@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Consider an object near to the sensor when their distance is about 4 cm
or below.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: André Apitzsch <git@apitzsch.eu>
Link: https://lore.kernel.org/r/20231126-bqm5_prox-v2-1-b7defc3979ac@apitzsch.eu
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable the QCA bluetooth on RB2. It identifies like the following:
Bluetooth: hci0: QCA Product ID :0x0000000a
Bluetooth: hci0: QCA SOC Version :0x40020150
Bluetooth: hci0: QCA ROM Version :0x00000201
Bluetooth: hci0: QCA Patch Version:0x00000001
Bluetooth: hci0: QCA controller version 0x01500201
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231120-topic-rb2_bt-v2-2-4bbf266258ef@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This link got broken by commit e790a4ce52 ("arm: docs: Move Arm
documentation to Documentation/arch/") when the doc moved from arm/ to
arch/arm/. Fix the link so that it can continue to be followed.
Fixes: e790a4ce52 ("arm: docs: Move Arm documentation to Documentation/arch/")
Cc: Alexandre TORGUE <alexandre.torgue@foss.st.com>
Cc: Yanteng Si <siyanteng@loongson.cn>
Cc: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/20231129030443.2753833-1-swboyd@chromium.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add DTS for Qualcomm qcs6490-rb3gen2 board which uses
QCS6490 SoC. This adds debug uart and usb support along
with regulators found on this board.
Co-developed-by: Naina Mehta <quic_nainmeht@quicinc.com>
Signed-off-by: Naina Mehta <quic_nainmeht@quicinc.com>
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20231129065816.26409-4-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add DTS for Qualcomm IDP platform using QCM6490 SoC.
This adds debug uart, eMMC and usb support along with
regulators found on this board.
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20231129065816.26409-3-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Document the qcom,qcm6490-idp and qcs6490-rb3gen2 boards.
qcm6490-idp based off qcm6490 SoC derived from sc7280 meant for
various form factor including IoT and qcs6490-rb3gen2 based off
qcs6490 SoC derivative of qcm6490 without internal modem.
Co-developed by: Naina Mehta <quic_nainmeht@quicinc.com>
Signed-off by: Naina Mehta <quic_nainmeht@quicinc.com>
Signed-off-by: Komal Bajaj <quic_kbajaj@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231129065816.26409-2-quic_kbajaj@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Some gpios are reserved for other subsystems, so mark these reserved
gpios.
Suggested-by: Can Guo <quic_cang@quicinc.com>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20231129103325.24854-6-quic_tengfan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add uart support for QRD4450 for enable uart console.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Link: https://lore.kernel.org/r/20231129103325.24854-5-quic_tengfan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add base description of UART and TLMM nodes which helps SM4450
boot to shell with console on boards with this SoC.
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Link: https://lore.kernel.org/r/20231129103325.24854-4-quic_tengfan@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Pass QMP PCI PHY PIPE clocks to the GCC controller so it does not have to
find them by matching globaly by name.
If not passed directly, driver maintains backwards compatibility by then
falling back to global lookup.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20231013164025.3541606-2-robimarko@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
QMP PCI PHY PIPE clocks are inputs for the GCC clock controller.
In order to describe this in DTS, allow passing them as the inputs to GCC.
This has a benefit that it avoids doing a global matching by name.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20231013164025.3541606-1-robimarko@gmail.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Configure the thermals for the QUIET_THERM, CAM_FLASH_THERM, MSM_THERM
and RFC_CAM_THERM thermistors connected to PM7325.
With this PMIC the software communication to the ADC is going through
PMK7325 (= PMK8350).
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Link: https://lore.kernel.org/r/20231013-fp5-thermals-v1-4-f14df01922e6@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the defines for the ADC channels found on the PM7325. The list is
taken from downstream msm-5.4 and adjusted for mainline.
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20231013-fp5-thermals-v1-1-f14df01922e6@fairphone.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
UFS host controller, when scaling gears, should choose appropriate
performance state of RPMh power domain controller along with clock
frequency. So let's add the OPP table support to specify both clock
frequency and RPMh performance states replacing the old "freq-table-hz"
property.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231012172129.65172-6-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
UFS host controller, when scaling gears, should choose appropriate
performance state of RPMh power domain controller along with clock
frequency. So let's add the OPP table support to specify both clock
frequency and RPMh performance states replacing the old "freq-table-hz"
property.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[mani: Splitted pd change and used rpmhpd_opp_low_svs]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20231012172129.65172-5-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
IPQ bootloaders do not need these information to select the
the DTB blob. So dropping the board names from board section.
Signed-off-by: Sridharan S N <quic_sridsn@quicinc.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230927093130.4098385-1-quic_sridsn@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Add the APCS, A53 PLL, cpu-opp-table nodes to set
the CPU frequency at 800MHz (idle) or 1.008GHz.
Co-developed-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
Signed-off-by: Gokul Sriram Palanisamy <quic_gokulsri@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230925102826.405446-4-quic_gokulsri@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
This describes the USB components on IPQ5018, and one of the SPI
controllers. The IPQ9574 RDP descriptions are refactored to keep common
dtsi, and the WPS button is described.
GPLL0 is described as a source clock for the mailbox (APCS clock)
across IPQ5332, IPQ6018, IPQ8074, and IPQ9574.
On MSM8916, the asynchronous packet router (APR) is described on the
DSP remoteproc, and audio services are described. Audio and modem are
then enabled on a range of MSM8916- and MSM8939-based devices.
GPU support is enabled on the Samsung Galaxy Tab devices, and RGB LED is
added to BQ Aquaris X5 and BQ Aquaris M5.
The QRB4210 RB2 is no longer hard coded to be in peripheral mode, and
RPMh sleep stats are added to the SA8775P platform.
Camera Control Interface (CCI) controllers are introduced on SC7280.
One of the DP PHY compatibles on X13s is updated, to reflect that the it
should operate in eDP mode. And missing camera LED pin configuration is
added.
Flash LED is described fo the SDM845-based OnePlus and Xiaomi devices.
Missing description of USB PHY regulators are added to Sony Xperia 10
IV, and modem and ath10k-based WiFi are enabled.
The uart for the Bluetooth controller on the SM6375 is added as well.
The true rng block is added for SA8775P, SC7280, SM8450, an SM8550.
-----BEGIN PGP SIGNATURE-----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=FSDh
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.7-2' into arm64-for-6.8
This merges leftover patches originally targetted for 6.7, but wasn't
propagated in time.
This describes the USB components on IPQ5018, and one of the SPI
controllers. The IPQ9574 RDP descriptions are refactored to keep common
dtsi, and the WPS button is described.
GPLL0 is described as a source clock for the mailbox (APCS clock)
across IPQ5332, IPQ6018, IPQ8074, and IPQ9574.
On MSM8916, the asynchronous packet router (APR) is described on the
DSP remoteproc, and audio services are described. Audio and modem are
then enabled on a range of MSM8916- and MSM8939-based devices.
GPU support is enabled on the Samsung Galaxy Tab devices, and RGB LED is
added to BQ Aquaris X5 and BQ Aquaris M5.
The QRB4210 RB2 is no longer hard coded to be in peripheral mode, and
RPMh sleep stats are added to the SA8775P platform.
Camera Control Interface (CCI) controllers are introduced on SC7280.
One of the DP PHY compatibles on X13s is updated, to reflect that the it
should operate in eDP mode. And missing camera LED pin configuration is
added.
Flash LED is described fo the SDM845-based OnePlus and Xiaomi devices.
Missing description of USB PHY regulators are added to Sony Xperia 10
IV, and modem and ath10k-based WiFi are enabled.
The uart for the Bluetooth controller on the SM6375 is added as well.
The true rng block is added for SA8775P, SC7280, SM8450, an SM8550.
