[ Upstream commit 50bd33f6b3 ]
After applying the workaround for err050089, the LS1028A platform
experiences RCU stalls on RT kernel. This issue is caused by the
recursive acquisition of the read lock enetc_mdio_lock. Here list some
of the call stacks identified under the enetc_poll path that may lead to
a deadlock:
enetc_poll
-> enetc_lock_mdio
-> enetc_clean_rx_ring OR napi_complete_done
-> napi_gro_receive
-> enetc_start_xmit
-> enetc_lock_mdio
-> enetc_map_tx_buffs
-> enetc_unlock_mdio
-> enetc_unlock_mdio
After enetc_poll acquires the read lock, a higher-priority writer attempts
to acquire the lock, causing preemption. The writer detects that a
read lock is already held and is scheduled out. However, readers under
enetc_poll cannot acquire the read lock again because a writer is already
waiting, leading to a thread hang.
Currently, the deadlock is avoided by adjusting enetc_lock_mdio to prevent
recursive lock acquisition.
Fixes: 6d36ecdbc4 ("net: enetc: take the MDIO lock only once per NAPI poll cycle")
Signed-off-by: Jianpeng Chang <jianpeng.chang.cn@windriver.com>
Acked-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20251015021427.180757-1-jianpeng.chang.cn@windriver.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a429b76114 ]
Robert recently reported two corrupted images that can cause system
crashes, which are related to the new encoded extents introduced
in Linux 6.15:
- The first one [1] has plen != 0 (e.g. plen == 0x2000000) but
(plen & Z_EROFS_EXTENT_PLEN_MASK) == 0. It is used to represent
special extents such as sparse extents (!EROFS_MAP_MAPPED), but
previously only plen == 0 was handled;
- The second one [2] has pa 0xffffffffffdcffed and plen 0xb4000,
then "cur [0xfffffffffffff000] += bvec.bv_len [0x1000]" in
"} while ((cur += bvec.bv_len) < end);" wraps around, causing an
out-of-bound access of pcl->compressed_bvecs[] in
z_erofs_submit_queue(). EROFS only supports 48-bit physical block
addresses (up to 1EiB for 4k blocks), so add a sanity check to
enforce this.
Fixes: 1d191b4ca5 ("erofs: implement encoded extent metadata")
Reported-by: Robert Morris <rtm@csail.mit.edu>
Closes: https://lore.kernel.org/r/75022.1759355830@localhost [1]
Closes: https://lore.kernel.org/r/80524.1760131149@localhost [2]
Reviewed-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf29555f5b ]
Creating FDB entries is possible from a non-initial user namespace when
having CAP_NET_ADMIN, yet, when deleting FDB entries, processes receive
an EPERM because the capability is always checked against the initial
user namespace. This restricts the FDB management from unprivileged
containers.
Drop the netlink_capable check in rtnl_fdb_del as it was originally
dropped in c5c351088a and reintroduced in 1690be63a2 without
intention.
This patch was tested using a container on GyroidOS, where it was
possible to delete FDB entries from an unprivileged user namespace and
private network namespace.
Fixes: 1690be63a2 ("bridge: Add vlan support to static neighbors")
Reviewed-by: Michael Weiß <michael.weiss@aisec.fraunhofer.de>
Tested-by: Harshal Gohel <hg@simonwunderlich.de>
Signed-off-by: Johannes Wiesböck <johannes.wiesboeck@aisec.fraunhofer.de>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20251015201548.319871-1-johannes.wiesboeck@aisec.fraunhofer.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aaf043a568 ]
When building with Clang 20 or newer, there are some objtool warnings
from unexpected fallthroughs to other functions:
vmlinux.o: warning: objtool: mlx5e_mpwrq_mtts_per_wqe() falls through to next function mlx5e_mpwrq_max_num_entries()
vmlinux.o: warning: objtool: mlx5e_mpwrq_max_log_rq_size() falls through to next function mlx5e_get_linear_rq_headroom()
LLVM 20 contains an (admittedly problematic [1]) optimization [2] to
convert divide by zero into the equivalent of __builtin_unreachable(),
which invokes undefined behavior and destroys code generation when it is
encountered in a control flow graph.
mlx5e_mpwrq_umr_entry_size() returns 0 in the default case of an
unrecognized mlx5e_mpwrq_umr_mode value. mlx5e_mpwrq_mtts_per_wqe(),
which is inlined into mlx5e_mpwrq_max_log_rq_size(), uses the result of
mlx5e_mpwrq_umr_entry_size() in a divide operation without checking for
zero, so LLVM is able to infer there will be a divide by zero in this
case and invokes undefined behavior. While there is some proposed work
to isolate this undefined behavior and avoid the destructive code
generation that results in these objtool warnings, code should still be
defensive against divide by zero.
As the WARN_ONCE() implies that an invalid value should be handled
gracefully, return 1 instead of 0 in the default case so that the
results of this division operation is always valid.
Fixes: 168723c1f8 ("net/mlx5e: xsk: Use umr_mode to calculate striding RQ parameters")
Link: https://lore.kernel.org/CAGG=3QUk8-Ak7YKnRziO4=0z=1C_7+4jF+6ZeDQ9yF+kuTOHOQ@mail.gmail.com/ [1]
Link: 37932643ab [2]
Closes: https://github.com/ClangBuiltLinux/linux/issues/2131
Closes: https://github.com/ClangBuiltLinux/linux/issues/2132
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20251014-mlx5e-avoid-zero-div-from-mlx5e_mpwrq_umr_entry_size-v1-1-dc186b8819ef@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85d7dda5a9 ]
After resuming from S4, all CPUs except the boot CPU have the wrong EPP
hint programmed. This is because when the CPUs were offlined the EPP value
was reset to 0.
This is a similar problem as fixed by
commit ba3319e590 ("cpufreq/amd-pstate: Fix a regression leading to EPP
0 after resume") and the solution is also similar. When offlining rather
than reset the values to zero, reset them to match those chosen by the
policy. When the CPUs are onlined again these values will be restored.
Closes: https://community.frame.work/t/increased-power-usage-after-resuming-from-suspend-on-ryzen-7040-kernel-6-15-regression/74531/20?u=mario_limonciello
Fixes: 608a76b652 ("cpufreq/amd-pstate: Add support for the "Requested CPU Min frequency" BIOS option")
Reviewed-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7b4747d8e ]
The lock-related debug logic (CONFIG_LOCK_STAT) in the kernel is noting
the following warning when the BlueField-3 SOC is booted:
BUG: key ffff00008a3402a8 has not been registered!
------------[ cut here ]------------
DEBUG_LOCKS_WARN_ON(1)
WARNING: CPU: 4 PID: 592 at kernel/locking/lockdep.c:4801 lockdep_init_map_type+0x1d4/0x2a0
<snip>
Call trace:
lockdep_init_map_type+0x1d4/0x2a0
__kernfs_create_file+0x84/0x140
sysfs_add_file_mode_ns+0xcc/0x1cc
internal_create_group+0x110/0x3d4
internal_create_groups.part.0+0x54/0xcc
sysfs_create_groups+0x24/0x40
device_add+0x6e8/0x93c
device_register+0x28/0x40
__hwmon_device_register+0x4b0/0x8a0
devm_hwmon_device_register_with_groups+0x7c/0xe0
mlxbf_pmc_probe+0x1e8/0x3e0 [mlxbf_pmc]
platform_probe+0x70/0x110
The mlxbf_pmc driver must call sysfs_attr_init() during the
initialization of the "count_clock" data structure to avoid
this warning.
Fixes: 5efc800975 ("platform/mellanox: mlxbf-pmc: Add support for monitoring cycle count")
Reviewed-by: Shravan Kumar Ramani <shravankr@nvidia.com>
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://patch.msgid.link/20251013155605.3589770-1-davthompson@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee916dccd4 ]
This pattern isn't very documented, and apparently not used much outside
of 'make tools/help', but it has existed for over a decade (since commit
ea01fa9f63: "tools: Connect to the kernel build system").
However, it doesn't work very well for most cases, particularly the
useful "tools/all" target, because it overrides the LDFLAGS value with
an empty one.
And once overridden, 'make' will then not honor the tooling makefiles
trying to change it - which then makes any LDFLAGS use in the tooling
directory break, typically causing odd link errors.
Remove that LDFLAGS override, since it seems to be entirely historical.
The core kernel makefiles no longer modify LDFLAGS as part of the build,
and use kernel-specific link flags instead (eg 'KBUILD_LDFLAGS' and
friends).
This allows more of the 'make tools/*' cases to work. I say 'more',
because some of the tooling build rules make various other assumptions
or have other issues, so it's still a bit hit-or-miss. But those issues
tend to show up with the 'make -C tools xyz' pattern too, so now it's no
longer an issue of this particular 'tools/*' build rule being special.
Acked-by: Nathan Chancellor <nathan@kernel.org>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Borislav Petkov <bp@alien8.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1b53426334 ]
If we want to invalidate a remote key we should do that as soon as
possible, so do it in the first send work request.
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8e970358b ]
There's no need to get log message for every IB_WC_WR_FLUSH_ERR
completion, but any other error should be logged at level ERR.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9219f8cac2 ]
This simplifies further changes...
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 02548c477a ]
This is already handled in the server, but currently it done
in a very complex way there. So we do it much simpler.
Note that put_receive_buffer() will take care of it
in case data_length is 0.
Cc: Steve French <smfrench@gmail.com>
Cc: Tom Talpey <tom@talpey.com>
Cc: Long Li <longli@microsoft.com>
Cc: linux-cifs@vger.kernel.org
Cc: samba-technical@lists.samba.org
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43de0ac332 ]
Event ID is only using the attr::config bit [7, 0] but we check the
event range using the whole 64bit field. It blocks the usage of the
rest field of attr::config. Relax the check by only using the
bit [7, 0].
Acked-by: Jonathan Cameron <jonathan.cameron@huawei.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Yushan Wang <wangyushan12@huawei.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e2cf5581f ]
These extensions depends on the F one. Add a validation callback
checking for the F extension to be present. Now that extensions are
correctly reported using the F/D presence, we can remove the
has_fpu() check in hwprobe_isa_ext0().
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250527100001.33284-1-cleger@rivosinc.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17e9521044 ]
Some RISC-V implementations may hang when attempting to write an
unsupported SATP mode, even though the latest RISC-V specification
states such writes should have no effect. To avoid this issue, the
logic for selecting SATP mode has been refined:
The kernel now determines the SATP mode limit by taking the minimum of
the value specified by the kernel command line (noXlvl) and the
"mmu-type" property in the device tree (FDT). If only one is specified,
use that.
- If the resulting limit is sv48 or higher, the kernel will probe SATP
modes from this limit downward until a supported mode is found.
- If the limit is sv39, the kernel will directly use sv39 without
probing.
This ensures SATP mode selection is safe and compatible with both
hardware and user configuration, minimizing the risk of hangs.
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com>
Link: https://lore.kernel.org/r/20250722-satp-from-fdt-v1-2-5ba22218fa5f@pigmoral.tech
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3243bed39 ]
Change the return value of match_noXlvl() to return the SATP mode that
will be used, rather than the mode being disabled. This enables unified
logic for return value judgement with the function that obtains mmu-type
from the fdt, avoiding extra conversion. This only changes the naming,
with no functional impact.
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Nutty Liu <liujingqi@lanxincomputing.com>
Link: https://lore.kernel.org/r/20250722-satp-from-fdt-v1-1-5ba22218fa5f@pigmoral.tech
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9316512b71 ]
PAGE_KERNEL_TEXT is an old macro that is used to tell kernel whether
kernel text has to be mapped read-only or read-write based on build
time options.
But nowadays, with functionnalities like jump_labels, static links,
etc ... more only less all kernels need to be read-write at some
point, and some combinations of configs failed to work due to
innacurate setting of PAGE_KERNEL_TEXT. On the other hand, today
we have CONFIG_STRICT_KERNEL_RWX which implements a more controlled
access to kernel modifications.
Instead of trying to keep PAGE_KERNEL_TEXT accurate with all
possible options that may imply kernel text modification, always
set kernel text read-write at startup and rely on
CONFIG_STRICT_KERNEL_RWX to provide accurate protection.
Do this by passing PAGE_KERNEL_X to map_kernel_page() in
__maping_ram_chunk() instead of passing PAGE_KERNEL_TEXT. Once
this is done, the only remaining user of PAGE_KERNEL_TEXT is
mmu_mark_initmem_nx() which uses it in a call to setibat().
As setibat() ignores the RW/RO, we can seamlessly replace
PAGE_KERNEL_TEXT by PAGE_KERNEL_X here as well and get rid of
PAGE_KERNEL_TEXT completely.
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Closes: https://lore.kernel.org/all/342b4120-911c-4723-82ec-d8c9b03a8aef@mailbox.org/
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Andrew Donnellan <ajd@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/8e2d793abf87ae3efb8f6dce10f974ac0eda61b8.1757412205.git.christophe.leroy@csgroup.eu
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28c4d9bc07 ]
In gdlm_put_lock(), there is a small window of time in which the
DFL_UNMOUNT flag has been set but the lockspace hasn't been released,
yet. In that window, dlm may still call gdlm_ast() and gdlm_bast().
To prevent it from dereferencing freed glock objects, only free the
glock if the lockspace has actually been released.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Andrew Price <anprice@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4d4ebc849 ]
The `ID_AA64MMFR4_EL1.EIESB` field, is an unsigned enumeration, but was
incorrectly defined as a `SignedEnum` when introduced in commit
cfc680bb04 ("arm64: sysreg: Add layout for ID_AA64MMFR4_EL1"). This is
corrected to `UnsignedEnum`.
Conversely, the `ID_AA64DFR0_EL1.DoubleLock` field, is a signed
enumeration, but was incorrectly defined as an `UnsignedEnum`. This is
corrected to `SignedEnum`, which wasn't correctly set when annotated as
such in commit ad16d4cf0b ("arm64/sysreg: Initial unsigned annotations
for ID registers").
Signed-off-by: Fuad Tabba <tabba@google.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00e58ff924 ]
In preparation for the future commit ("bitops: Add __attribute_const__ to generic
ffs()-family implementations"), which allows GCC's value range tracker
to see past ffs(), GCC 8 on ARM thinks that it might be possible that
"ffs(rq) - 8" used here:
v = FIELD_PREP(PCI_EXP_DEVCTL_READRQ, ffs(rq) - 8);
could wrap below 0, leading to a very large value, which would be out of
range for the FIELD_PREP() usage:
drivers/pci/pci.c: In function 'pcie_set_readrq':
include/linux/compiler_types.h:572:38: error: call to '__compiletime_assert_471' declared with attribute error: FIELD_PREP: value too large for the field
...
drivers/pci/pci.c:5896:6: note: in expansion of macro 'FIELD_PREP'
v = FIELD_PREP(PCI_EXP_DEVCTL_READRQ, ffs(rq) - 8);
^~~~~~~~~~
If the result of the ffs() is bounds checked before being used in
FIELD_PREP(), the value tracker seems happy again. :)
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Closes: https://lore.kernel.org/linux-pci/CA+G9fYuysVr6qT8bjF6f08WLyCJRG7aXAeSd2F7=zTaHHd7L+Q@mail.gmail.com/
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20250905052836.work.425-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9282bc905f ]
If Catalog File contains corrupted record for the case of
hidden directory's type, regard it as I/O error instead of
Invalid argument.
Signed-off-by: Yangtao Li <frank.li@vivo.com>
Reviewed-by: Viacheslav Dubeyko <slava@dubeyko.com>
Link: https://lore.kernel.org/r/20250805165905.3390154-1-frank.li@vivo.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2048ec5b98 ]
The syzbot reported issue in hfs_find_set_zero_bits():
=====================================================
BUG: KMSAN: uninit-value in hfs_find_set_zero_bits+0x74d/0xb60 fs/hfs/bitmap.c:45
hfs_find_set_zero_bits+0x74d/0xb60 fs/hfs/bitmap.c:45
hfs_vbm_search_free+0x13c/0x5b0 fs/hfs/bitmap.c:151
hfs_extend_file+0x6a5/0x1b00 fs/hfs/extent.c:408
hfs_get_block+0x435/0x1150 fs/hfs/extent.c:353
__block_write_begin_int+0xa76/0x3030 fs/buffer.c:2151
block_write_begin fs/buffer.c:2262 [inline]
cont_write_begin+0x10e1/0x1bc0 fs/buffer.c:2601
hfs_write_begin+0x85/0x130 fs/hfs/inode.c:52
cont_expand_zero fs/buffer.c:2528 [inline]
cont_write_begin+0x35a/0x1bc0 fs/buffer.c:2591
hfs_write_begin+0x85/0x130 fs/hfs/inode.c:52
hfs_file_truncate+0x1d6/0xe60 fs/hfs/extent.c:494
hfs_inode_setattr+0x964/0xaa0 fs/hfs/inode.c:654
notify_change+0x1993/0x1aa0 fs/attr.c:552
do_truncate+0x28f/0x310 fs/open.c:68
do_ftruncate+0x698/0x730 fs/open.c:195
do_sys_ftruncate fs/open.c:210 [inline]
__do_sys_ftruncate fs/open.c:215 [inline]
__se_sys_ftruncate fs/open.c:213 [inline]
__x64_sys_ftruncate+0x11b/0x250 fs/open.c:213
x64_sys_call+0xfe3/0x3db0 arch/x86/include/generated/asm/syscalls_64.h:78
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Uninit was created at:
slab_post_alloc_hook mm/slub.c:4154 [inline]
slab_alloc_node mm/slub.c:4197 [inline]
__kmalloc_cache_noprof+0x7f7/0xed0 mm/slub.c:4354
kmalloc_noprof include/linux/slab.h:905 [inline]
hfs_mdb_get+0x1cc8/0x2a90 fs/hfs/mdb.c:175
hfs_fill_super+0x3d0/0xb80 fs/hfs/super.c:337
get_tree_bdev_flags+0x6e3/0x920 fs/super.c:1681
get_tree_bdev+0x38/0x50 fs/super.c:1704
hfs_get_tree+0x35/0x40 fs/hfs/super.c:388
vfs_get_tree+0xb0/0x5c0 fs/super.c:1804
do_new_mount+0x738/0x1610 fs/namespace.c:3902
path_mount+0x6db/0x1e90 fs/namespace.c:4226
do_mount fs/namespace.c:4239 [inline]
__do_sys_mount fs/namespace.c:4450 [inline]
__se_sys_mount+0x6eb/0x7d0 fs/namespace.c:4427
__x64_sys_mount+0xe4/0x150 fs/namespace.c:4427
x64_sys_call+0xfa7/0x3db0 arch/x86/include/generated/asm/syscalls_64.h:166
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd9/0x210 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
CPU: 1 UID: 0 PID: 12609 Comm: syz.1.2692 Not tainted 6.16.0-syzkaller #0 PREEMPT(none)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 07/12/2025
=====================================================
The HFS_SB(sb)->bitmap buffer is allocated in hfs_mdb_get():
HFS_SB(sb)->bitmap = kmalloc(8192, GFP_KERNEL);
Finally, it can trigger the reported issue because kmalloc()
doesn't clear the allocated memory. If allocated memory contains
only zeros, then everything will work pretty fine.
But if the allocated memory contains the "garbage", then
it can affect the bitmap operations and it triggers
the reported issue.
This patch simply exchanges the kmalloc() on kzalloc()
with the goal to guarantee the correctness of bitmap operations.
Because, newly created allocation bitmap should have all
available blocks free. Potentially, initialization bitmap's read
operation could not fill the whole allocated memory and
"garbage" in the not initialized memory will be the reason of
volume coruptions and file system driver bugs.
Reported-by: syzbot <syzbot+773fa9d79b29bd8b6831@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=773fa9d79b29bd8b6831
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20250820230636.179085-1-slava@dubeyko.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6af515c9f3 ]
Force values over 3 are undefined, so don't treat them as 3.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c62663a986 ]
Potenatially, __hfs_ext_read_extent() could operate by
not initialized values of fd->key after hfs_brec_find() call:
static inline int __hfs_ext_read_extent(struct hfs_find_data *fd, struct hfs_extent *extent,
u32 cnid, u32 block, u8 type)
{
int res;
hfs_ext_build_key(fd->search_key, cnid, block, type);
fd->key->ext.FNum = 0;
res = hfs_brec_find(fd);
if (res && res != -ENOENT)
return res;
if (fd->key->ext.FNum != fd->search_key->ext.FNum ||
fd->key->ext.FkType != fd->search_key->ext.FkType)
return -ENOENT;
if (fd->entrylength != sizeof(hfs_extent_rec))
return -EIO;
hfs_bnode_read(fd->bnode, extent, fd->entryoffset, sizeof(hfs_extent_rec));
return 0;
}
This patch changes kmalloc() on kzalloc() in hfs_find_init()
and intializes fd->record, fd->keyoffset, fd->keylength,
fd->entryoffset, fd->entrylength for the case if hfs_brec_find()
has been found nothing in the b-tree node.
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20250818225252.126427-1-slava@dubeyko.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18b07c44f2 ]
Currently, hfs_brec_remove() executes moving records
towards the location of deleted record and it updates
offsets of moved records. However, the hfs_brec_remove()
logic ignores the "mess" of b-tree node's free space and
it doesn't touch the offsets out of records number.
Potentially, it could confuse fsck or driver logic or
to be a reason of potential corruption cases.
This patch reworks the logic of hfs_brec_remove()
by means of clearing freed space of b-tree node
after the records moving. And it clear the last
offset that keeping old location of free space
because now the offset before this one is keeping
the actual offset to the free space after the record
deletion.
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20250815194918.38165-1-slava@dubeyko.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 11aa54ba4c ]
The pkey ioctl PKEY_CLR2SECK2 describes in the pkey.h header file
the parameter 'keygenflags' which is forwarded to the handler
functions which actually deal with the clear key to secure key
operation. The ep11 handler module function ep11_clr2keyblob()
function receives this parameter but does not forward it to the
underlying function ep11_unwrapkey() on invocation. So in the end
the user of this ioctl could not forward additional key generation
flags to the ep11 implementation and thus was unable to modify the
key generation process in any way. So now call ep11_unwrapkey()
with the real keygenflags instead of 0 and thus the user of this
ioctl can for example via keygenflags provide valid combinations
of XCP_BLOB_* flags.
Suggested-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a20b83cf45 ]
On nios2, with CONFIG_FLATMEM set, the kernel relies on
memblock_get_current_limit() to determine the limits of mem_map, in
particular for max_low_pfn.
Unfortunately, memblock.current_limit is only default initialized to
MEMBLOCK_ALLOC_ANYWHERE at this point of the bootup, potentially leading
to situations where max_low_pfn can erroneously exceed the value of
max_pfn and, thus, the valid range of available DRAM.
This can in turn cause kernel-level paging failures, e.g.:
[ 76.900000] Unable to handle kernel paging request at virtual address 20303000
[ 76.900000] ea = c0080890, ra = c000462c, cause = 14
[ 76.900000] Kernel panic - not syncing: Oops
[ 76.900000] ---[ end Kernel panic - not syncing: Oops ]---
This patch fixes this by pre-calculating memblock.current_limit
based on the upper limits of the available memory ranges via
adjust_lowmem_bounds, a simplified version of the equivalent
implementation within the arm architecture.
Signed-off-by: Simon Schuster <schuster.simon@siemens-energy.com>
Signed-off-by: Andreas Oetken <andreas.oetken@siemens-energy.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5e08824837 ]
In the setup_arg_pages(), ret is declared as an unsigned long.
The ret might take a negative value. Therefore, its type should
be changed to int.
Signed-off-by: Xichao Zhao <zhao.xichao@vivo.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20250825073609.219855-1-zhao.xichao@vivo.com
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8abcff174 ]
Since commit f74dacb4c8 ("dlm: fix recovery of middle conversions")
we introduced additional debugging information if we hit the middle
conversion by using log_limit(). The DLM log_limit() functionality
requires a DLM debug option being enabled. As this case is so rarely and
excempt any potential introduced new issue with recovery we switching it
to log_rinfo() ad this is ratelimited under normal DLM loglevel.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0fbbcab7f9 ]
Format the kernel-doc for SCALE_HW_CALIB_INVALID correctly to
avoid a kernel-doc warning:
Warning: include/linux/misc_cgroup.h:26 Enum value
'MISC_CG_RES_TDX' not described in enum 'misc_res_type'
Fixes: 7c035bea94 ("KVM: TDX: Register TDX host key IDs to cgroup misc controller")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 48b77733d0 ]
After commit 5402c4d4d2 ("exportfs: require ->fh_to_parent() to encode
connectable file handles") we will fail to create non-decodable file
handles for filesystems without export operations. Fix it.
Fixes: 5402c4d4d2 ("exportfs: require ->fh_to_parent() to encode connectable file handles")
Reviewed-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Dequeuing a fair task on a throttled hierarchy returns early on
encountering a throttled cfs_rq since the throttle path has already
dequeued the hierarchy above and has adjusted the h_nr_* accounting till
the root cfs_rq.
dequeue_entities() crucially misses calling __block_task() for delayed
tasks being dequeued on the throttled hierarchies, but this was mostly
harmless until commit b7ca5743a2 ("sched/core: Tweak
wait_task_inactive() to force dequeue sched_delayed tasks") since all
existing cases would re-enqueue the task if task_on_rq_queued() returned
true and the task would eventually be blocked at pick after the
hierarchy was unthrottled.
wait_task_inactive() is special as it expects the delayed task on
throttled hierarchy to reach the blocked state on dequeue but since
__block_task() is never called, task_on_rq_queued() continues to return
true. Furthermore, since the task is now off the hierarchy, the pick
never reaches it to fully block the task even after unthrottle leading
to wait_task_inactive() looping endlessly.
Remedy this by calling __block_task() if a delayed task is being
dequeued on a throttled hierarchy.
This fix is only required for stabled kernels implementing delay dequeue
(>= v6.12) before v6.18 since upstream commit e1fad12dcb ("sched/fair:
Switch to task based throttle model") indirectly fixes this by removing
the early return conditions in dequeue_entities() as part of the per-task
throttle feature.
Cc: stable@vger.kernel.org
Reported-by: Matt Fleming <matt@readmodwrite.com>
Closes: https://lore.kernel.org/all/20250925133310.1843863-1-matt@readmodwrite.com/
Fixes: b7ca5743a2 ("sched/core: Tweak wait_task_inactive() to force dequeue sched_delayed tasks")
Tested-by: Matt Fleming <mfleming@cloudflare.com>
Signed-off-by: K Prateek Nayak <kprateek.nayak@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c9e64e83b upstream.
The xe_vram_region_alloc() function returns NULL on error. It never
returns error pointers. Update the error checking to match.
Fixes: 4b0a5f5ce7 ("drm/xe: Unify the initialization of VRAM regions")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/5449065e-9758-4711-b706-78771c0753c4@sabinyo.mountain
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bbfe987c5a upstream.
Commit 495c8d3503 ("PM: hibernate: Add pm_hibernation_mode_is_suspend()")
that introduced pm_hibernation_mode_is_suspend() did not define it in
the case when CONFIG_HIBERNATION is unset, but CONFIG_SUSPEND is set.
Subsequent commit 0a6e9e098f ("drm/amd: Fix hybrid sleep") made the
amdgpu driver use that function which led to kernel build breakage in
the case mentioned above [1].
Address this by using appropriate #ifdeffery around the definition of
pm_hibernation_mode_is_suspend().
Fixes: 0a6e9e098f ("drm/amd: Fix hybrid sleep")
Reported-by: KernelCI bot <bot@kernelci.org>
Closes: https://groups.io/g/kernelci-results/topic/regression_pm_testing/115439919 [1]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mario Limonciello (AMD) <superm1@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7ac74613e5 ]
An array of VM binds can potentially evict other buffer objects (BOs)
within the same VM under certain conditions, which may lead to NULL
pointer dereferences later in the bind pipeline. To prevent this, clear
the allow_res_evict flag in the xe_bo_validate call.
v2:
- Invert polarity of no_res_evict (Thomas)
- Add comment in code explaining issue (Thomas)
Cc: stable@vger.kernel.org
Reported-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/6268
Fixes: 774b5fa509 ("drm/xe: Avoid evicting object of the same vm in none fault mode")
Fixes: 77f2ef3f16 ("drm/xe: Lock all gpuva ops during VM bind IOCTL")
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Tested-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20251009110618.3481870-1-matthew.brost@intel.com
(cherry picked from commit 8b9ba8d6d9)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
[ removed exec parameter from xe_bo_validate() calls ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d30203739b ]
There may be cases in which the BAR0 also needs to move to accommodate
the bigger BAR2. However if it's not released, the BAR2 resize fails.
During the vram probe it can't be released as it's already in use by
xe_mmio for early register access.
Add a new function in xe_vram and let xe_pci call it directly before
even early device probe. This allows the BAR2 to resize in cases BAR0
also needs to move, assuming there aren't other reasons to hold that
move:
[] xe 0000:03:00.0: vgaarb: deactivate vga console
[] xe 0000:03:00.0: [drm] Attempting to resize bar from 8192MiB -> 16384MiB
[] xe 0000:03:00.0: BAR 0 [mem 0x83000000-0x83ffffff 64bit]: releasing
[] xe 0000:03:00.0: BAR 2 [mem 0x4000000000-0x41ffffffff 64bit pref]: releasing
[] pcieport 0000:02:01.0: bridge window [mem 0x4000000000-0x41ffffffff 64bit pref]: releasing
[] pcieport 0000:01:00.0: bridge window [mem 0x4000000000-0x41ffffffff 64bit pref]: releasing
[] pcieport 0000:01:00.0: bridge window [mem 0x4000000000-0x43ffffffff 64bit pref]: assigned
[] pcieport 0000:02:01.0: bridge window [mem 0x4000000000-0x43ffffffff 64bit pref]: assigned
[] xe 0000:03:00.0: BAR 2 [mem 0x4000000000-0x43ffffffff 64bit pref]: assigned
[] xe 0000:03:00.0: BAR 0 [mem 0x83000000-0x83ffffff 64bit]: assigned
[] pcieport 0000:00:01.0: PCI bridge to [bus 01-04]
[] pcieport 0000:00:01.0: bridge window [mem 0x83000000-0x840fffff]
[] pcieport 0000:00:01.0: bridge window [mem 0x4000000000-0x44007fffff 64bit pref]
[] pcieport 0000:01:00.0: PCI bridge to [bus 02-04]
[] pcieport 0000:01:00.0: bridge window [mem 0x83000000-0x840fffff]
[] pcieport 0000:01:00.0: bridge window [mem 0x4000000000-0x43ffffffff 64bit pref]
[] pcieport 0000:02:01.0: PCI bridge to [bus 03]
[] pcieport 0000:02:01.0: bridge window [mem 0x83000000-0x83ffffff]
[] pcieport 0000:02:01.0: bridge window [mem 0x4000000000-0x43ffffffff 64bit pref]
[] xe 0000:03:00.0: [drm] BAR2 resized to 16384M
[] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE e221:0000 dgfx:1 gfx:Xe2_HPG (20.02) ...
For BMG there are additional fix needed in the PCI side, but this
helps getting it to a working resize.
All the rebar logic is more pci-specific than xe-specific and can be
done very early in the probe sequence. In future it would be good to
move it out of xe_vram.c, but this refactor is left for later.
Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: stable@vger.kernel.org # 6.12+
Link: https://lore.kernel.org/intel-xe/fafda2a3-fc63-ce97-d22b-803f771a4d19@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250918-xe-pci-rebar-2-v1-2-6c094702a074@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 45e33f220f)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 4b0a5f5ce7 ]
Currently in the drivers we have defined VRAM regions per device and per
tile. Initialization of these regions is done in two completely different
ways. To simplify the logic of the code and make it easier to add new
regions in the future, let's unify the way we initialize VRAM regions.
v2:
- fix doc comments in struct xe_vram_region
- remove unnecessary includes (Jani)
v3:
- move code from xe_vram_init_regions_managers to xe_tile_init_noalloc
(Matthew)
- replace ioremap_wc to devm_ioremap_wc for mapping VRAM BAR
(Matthew)
- Replace the tile id parameter with vram region in the xe_pf_begin
function.
v4:
- remove tile back pointer from struct xe_vram_region
- add new back pointers: xe and migarte to xe_vram_region
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com> # rev3
Acked-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250714184818.89201-6-piotr.piorkowski@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Stable-dep-of: d30203739b ("drm/xe: Move rebar to be done earlier")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7a20b4f558 ]
Let's move the xe_vram_region structure to a new header dedicated to VRAM
to improve modularity and avoid unnecessary dependencies when only
VRAM-related structures are needed.
v2: Fix build if CONFIG_DRM_XE_DEVMEM_MIRROR is enabled
v3: Fix build if CONFIG_DRM_XE_DISPLAY is enabled
v4: Move helper to get tile dpagemap to xe_svm.c
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com> # rev3
Acked-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250714184818.89201-4-piotr.piorkowski@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Stable-dep-of: d30203739b ("drm/xe: Move rebar to be done earlier")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f92cfd72d9 ]
In future platforms, we will need to represent the device and tile
VRAM regions in a more dynamic way, so let's abandon the static
allocation of these structures and start use a dynamic allocation.
v2:
- Add a helpers for accessing fields of the xe_vram_region structure
v3:
- Add missing EXPORT_SYMBOL_IF_KUNIT for
xe_vram_region_actual_physical_size
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Reviewed-by: Satyanarayana K V P <satyanarayana.k.v.p@intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250714184818.89201-3-piotr.piorkowski@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Stable-dep-of: d30203739b ("drm/xe: Move rebar to be done earlier")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 922ae87523 ]
Let's replace the manual call to ioremap_wc function with devm_ioremap_wc
function, ensuring that VRAM mappings are automatically released when
the driver is detached.
Since devm_ioremap_wc registers the mapping with the device's managed
resources, the explicit iounmap call in vram_fini is no longer needed,
so let's remove it.
Signed-off-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Suggested-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Acked-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250714184818.89201-2-piotr.piorkowski@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Stable-dep-of: d30203739b ("drm/xe: Move rebar to be done earlier")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2c27aaee93 ]
Do read-modify-write so that we re-use the characterized reset value as
specified in TRM [1] to program calibration wait time which defines number
of cycles to wait for after startup state machine is in bandgap enable
state.
This fixes PLL lock timeout error faced while using RPi DSI Panel on TI's
AM62L and J721E SoC since earlier calibration wait time was getting
overwritten to zero value thus failing the PLL to lockup and causing
timeout.
[1] AM62P TRM (Section 14.8.6.3.2.1.1 DPHY_TX_DPHYTX_CMN0_CMN_DIG_TBIT2):
Link: https://www.ti.com/lit/pdf/spruj83
Cc: stable@vger.kernel.org
Fixes: 7a343c8bf4 ("phy: Add Cadence D-PHY support")
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Tested-by: Harikrishna Shenoy <h-shenoy@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20250704125915.1224738-3-devarsht@ti.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f4d027921c ]
match_region_by_range() is not using the helper function that also takes
extended linear cache size into account when comparing regions. This
causes a x2 region to show up as 2 partial incomplete regions rather
than a single CXL region with extended linear cache support. Replace
the open coded compare logic with the proper helper function for
comparison. User visible impact is that when 'cxl list' is issued,
no activa CXL region(s) are shown. There may be multiple idle regions
present. No actual active CXL region is present in the kernel.
[dj: Fix stable address]
Fixes: 0ec9849b63 ("acpi/hmat / cxl: Add extended linear cache support for CXL")
Cc: stable@vger.kernel.org
Reviewed-by: Gregory Price <gourry@gourry.net>
Reviewed-by: Alison Schofield <alison.schofield@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
[ constify struct range ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 15292f1b4c ]
Users can create as many monitoring groups as the number of RMIDs supported
by the hardware. However, on AMD systems, only a limited number of RMIDs
are guaranteed to be actively tracked by the hardware. RMIDs that exceed
this limit are placed in an "Unavailable" state.
When a bandwidth counter is read for such an RMID, the hardware sets
MSR_IA32_QM_CTR.Unavailable (bit 62). When such an RMID starts being tracked
again the hardware counter is reset to zero. MSR_IA32_QM_CTR.Unavailable
remains set on first read after tracking re-starts and is clear on all
subsequent reads as long as the RMID is tracked.
resctrl miscounts the bandwidth events after an RMID transitions from the
"Unavailable" state back to being tracked. This happens because when the
hardware starts counting again after resetting the counter to zero, resctrl
in turn compares the new count against the counter value stored from the
previous time the RMID was tracked.
This results in resctrl computing an event value that is either undercounting
(when new counter is more than stored counter) or a mistaken overflow (when
new counter is less than stored counter).
Reset the stored value (arch_mbm_state::prev_msr) of MSR_IA32_QM_CTR to
zero whenever the RMID is in the "Unavailable" state to ensure accurate
counting after the RMID resets to zero when it starts to be tracked again.
Example scenario that results in mistaken overflow
==================================================
1. The resctrl filesystem is mounted, and a task is assigned to a
monitoring group.
$mount -t resctrl resctrl /sys/fs/resctrl
$mkdir /sys/fs/resctrl/mon_groups/test1/
$echo 1234 > /sys/fs/resctrl/mon_groups/test1/tasks
$cat /sys/fs/resctrl/mon_groups/test1/mon_data/mon_L3_*/mbm_total_bytes
21323 <- Total bytes on domain 0
"Unavailable" <- Total bytes on domain 1
Task is running on domain 0. Counter on domain 1 is "Unavailable".
2. The task runs on domain 0 for a while and then moves to domain 1. The
counter starts incrementing on domain 1.
$cat /sys/fs/resctrl/mon_groups/test1/mon_data/mon_L3_*/mbm_total_bytes
7345357 <- Total bytes on domain 0
4545 <- Total bytes on domain 1
3. At some point, the RMID in domain 0 transitions to the "Unavailable"
state because the task is no longer executing in that domain.
$cat /sys/fs/resctrl/mon_groups/test1/mon_data/mon_L3_*/mbm_total_bytes
"Unavailable" <- Total bytes on domain 0
434341 <- Total bytes on domain 1
4. Since the task continues to migrate between domains, it may eventually
return to domain 0.
$cat /sys/fs/resctrl/mon_groups/test1/mon_data/mon_L3_*/mbm_total_bytes
17592178699059 <- Overflow on domain 0
3232332 <- Total bytes on domain 1
In this case, the RMID on domain 0 transitions from "Unavailable" state to
active state. The hardware sets MSR_IA32_QM_CTR.Unavailable (bit 62) when
the counter is read and begins tracking the RMID counting from 0.
Subsequent reads succeed but return a value smaller than the previously
saved MSR value (7345357). Consequently, the resctrl's overflow logic is
triggered, it compares the previous value (7345357) with the new, smaller
value and incorrectly interprets this as a counter overflow, adding a large
delta.
In reality, this is a false positive: the counter did not overflow but was
simply reset when the RMID transitioned from "Unavailable" back to active
state.
Here is the text from APM [1] available from [2].
"In PQOS Version 2.0 or higher, the MBM hardware will set the U bit on the
first QM_CTR read when it begins tracking an RMID that it was not
previously tracking. The U bit will be zero for all subsequent reads from
that RMID while it is still tracked by the hardware. Therefore, a QM_CTR
read with the U bit set when that RMID is in use by a processor can be
considered 0 when calculating the difference with a subsequent read."
[1] AMD64 Architecture Programmer's Manual Volume 2: System Programming
Publication # 24593 Revision 3.41 section 19.3.3 Monitoring L3 Memory
Bandwidth (MBM).
[ bp: Split commit message into smaller paragraph chunks for better
consumption. ]
Fixes: 4d05bf71f1 ("x86/resctrl: Introduce AMD QOS feature")
Signed-off-by: Babu Moger <babu.moger@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Reinette Chatre <reinette.chatre@intel.com>
Cc: stable@vger.kernel.org # needs adjustments for <= v6.17
Link: https://bugzilla.kernel.org/show_bug.cgi?id=206537 # [2]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
