_rtw_free_sta_priv() always returns _SUCCESS and it's return value
isn't checked either.
So it makes sense to mark it as void instead of u32.
Signed-off-by: Vihas Makwana <makvihas@gmail.com>
Link: https://lore.kernel.org/r/20220213173424.39935-1-makvihas@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
GB-PC1 uses some of the rgmii2 pins (22 - 33) as GPIO. Therefore, the
rgmii2 bus cannot be used on this device.
Overwrite pinctrl-0 property under the ethernet node without rgmii2_pins on
the GB-PC1 devicetree.
Tested-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20220215081725.3463-2-arinc.unal@arinc9.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix pinctrl-0 items under the ethernet node to be size-1 items.
Current notation would be used on specifications with non-zero cells.
Fixes: 0a93c0d758 ("staging: mt7621-dts: fix pinctrl properties for ethernet")
Reported-by: Sander Vanheule <sander@svanheule.net>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20220215081725.3463-1-arinc.unal@arinc9.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The r8188eu driver does no longer access rf path b registers via
PHYRegDef.
Change the PHYRegDef array in struct hal_data_8188e to a single
variable that holds the register addresses for rf path a. Remove
the initialisation of path b register addresses.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220212161737.381841-11-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All callers of phy_RFSerialRead set the eRFPath parameter to
RF_PATH_A. Remove the parameter and use RF_PATH_A directly.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220212161737.381841-10-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All callers of rtl8188e_PHY_QueryRFReg set the eRFPath parameter
to RF_PATH_A. Remove the parameter and use RF_PATH_A directly.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220212161737.381841-9-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rf registers can be read by rtw_wx_read_rf or via the private ioctl 0x0B.
The latter calls rtw_dbg_port. Limit rf register reads to path a in
rtw_debug_port.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220212161737.381841-8-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 3b011b097c ("staging: r8188eu: limit rf register writes to
path a") limits rf register writes by private ioctls to RF_PATH_A.
Apart from private ioctls, the rest of the driver uses only path a.
This patch limits rf register reads by the private ioctl 0x0D, which
calls rtw_wx_read_rf, to path a.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220212161737.381841-7-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The path variable is always 0 in bb_reg_dump. Remove the path variable
and replace the constant 0 with RF_PATH_A to make it clearer that path
a is used.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220212161737.381841-6-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The only caller of phy_RFSerialWrite sets the eRFPath parameter
to RF_PATH_A. Remove the parameter and use RF_PATH_A directly.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220212161737.381841-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All callers of rtl8188e_PHY_SetRFReg set the eRFPath parameter
to RF_PATH_A. Remove the parameter and use RF_PATH_A directly.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220212161737.381841-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 3b011b097c ("staging: r8188eu: limit rf register writes to
path a") limited the rtw_wx_write_rf function to write only rf registers
for path a.
The private ioctl 0x0B invokes the rtw_dbg_port function. This ioctl
can also be used for writing rf registers. We should limit these register
writes to rf path a as well.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220212161737.381841-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
We've already limited the rtw_wx_write_rf function to RF_PATH_A in commit
3b011b097c ("staging: r8188eu: limit rf register writes to path a").
Set RF_PATH_A explicitly when we call rtl8188e_PHY_SetRFReg. This will
make it easier later to verify that all callers of rtl8188e_PHY_SetRFReg
use path a.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220212161737.381841-2-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's no need to store the usb device speed in struct dvobj_priv.
We can read the speed from struct usb_device. dvobj_priv has a pointer
to the usb_device.
Reorder one if-statement to make the code clearer.
Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20220209192842.99399-1-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
checkpatch.pl emits the following warning:
CHECK: Prefer kzalloc(sizeof(*pcmd)...) over kzalloc(sizeof(struct cmd_obj)...)
+ pcmd = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL);
CHECK: Prefer kzalloc(sizeof(*psetkeyparm)...) over kzalloc(sizeof(struct setkey_parm)...)
+ psetkeyparm = kzalloc(sizeof(struct setkey_parm), GFP_KERNEL).
According to the above "CHECK[S]", use the preferred style in the two kzalloc()
of rtw_set_key().
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Link: https://lore.kernel.org/r/20220208180426.27455-2-fmdefrancesco@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Keep the success path and error path separate in rtw_usb_if1_init() and
drop the "status" variable.
Also, remove do-nothing gotos.
Reviewed-by: Pavel Skripkin <paskripkin@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Vihas Makwana <makvihas@gmail.com>
Link: https://lore.kernel.org/r/20220209190752.7232-1-makvihas@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
MT7621 system controller node is already providing the clocks for the whole
system but must also serve as a reset provider. Hence, add reset controller
related code to the clock driver itself. To get resets properly ready for
the rest of the world we need to move platform driver initialization process
to 'arch_initcall'.
CC: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20220210094859.927868-3-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make system controller a reset provider for all the peripherals in the
MT7621 SoC adding '#reset-cells' property.
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20220210094859.927868-2-sergio.paracuellos@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'destroy_workqueue()' already drains the queue before destroying it,
so there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220210060205.1607792-1-chi.minghao@zte.com.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
'destroy_workqueue()' already drains the queue before destroying it,
so there is no need to flush it explicitly.
Remove the redundant 'flush_workqueue()' calls.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi (CGEL ZTE) <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20220210060411.1607928-1-chi.minghao@zte.com.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace "struct list_head head = LIST_HEAD_INIT(head)" with
"LIST_HEAD(head)" to simplify the code.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Link: https://lore.kernel.org/r/20220209032645.38305-1-cai.huoqing@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace "struct list_head head = LIST_HEAD_INIT(head)" with
"LIST_HEAD(head)" to simplify the code.
Signed-off-by: Cai Huoqing <cai.huoqing@linux.dev>
Link: https://lore.kernel.org/r/20220209032715.38437-1-cai.huoqing@linux.dev
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The device needs data about the antenna configuration. This information
in provided by PDS (Platform Data Set, this is the wording used in WF200
documentation) files.
Until now, the driver had to parse the PDS file before to send it. This
solution was not acceptable for the vanilla kernel. We have slightly
changed the PDS format so it is now an array of Type-Length-Value.
This patch allows to support new format and keep compatibility with
legacy format.
Signed-off-by: Jérôme Pouiller <jerome.pouiller@silabs.com>
probe: allow new PDS format
Link: https://lore.kernel.org/r/20220211162659.528333-2-Jerome.Pouiller@silabs.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmIJZmoeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGZdoH/04d8zUhM3Fd3ACB
V/ONtOXmkfP2mEJSjb7cXTN1EM2SlOBdSnSsEw09FtGhjHABjOnLho4J5ixk9TH8
zNMNI3EMksM2T9KadHwxv8Vvp1LTrWRzMbws8tOCPA0RkOpikJfClC8CzRAyidJ3
cAbbDH/Jl1GnVZ8bpKmv2auYt+kNVGb0cwJ2W8phCwwkL7sLky5tgYeaGiJEXbJf
Tfi/3qtFdmYjD8wtYnCfzjnB7suG5nF7rGEnxCIxNi+IA4DieUv2c1KchuoaBfT9
df364VjKaGT3j+GB07ksQ/8mkwWiRXsCzOXAyMZSZaWjdMD4aAhCTJak5j7/TvGC
wtgHPww=
=/CMW
-----END PGP SIGNATURE-----
Merge 5.17-rc4 into staging-testing
We need the staging driver fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Move -Wunsligned-access to W=1 builds to avoid sprinkling warnings for
the latest Clang
- Fix missing fclose() in Kconfig
- Fix Kconfig to touch dep headers correctly when KCONFIG_AUTOCONFIG is
overridden.
-----BEGIN PGP SIGNATURE-----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=AOMt
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix the truncated path issue for HAVE_GCC_PLUGINS test in Kconfig
- Move -Wunsligned-access to W=1 builds to avoid sprinkling warnings
for the latest Clang
- Fix missing fclose() in Kconfig
- Fix Kconfig to touch dep headers correctly when KCONFIG_AUTOCONFIG is
overridden.
* tag 'kbuild-fixes-v5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: fix failing to generate auto.conf
kconfig: fix missing fclose() on error paths
Makefile.extrawarn: Move -Wunaligned-access to W=1
kconfig: let 'shell' return enough output for deep path names
- Don't install an hotplug notifier for GICV3-ITS on systems which do not
need it to prevent a warning in the notifier about inconsistent state
- Add the missing device tree matching for the T-HEAD PLIC variant so the
related SoC is properly supported.
-----BEGIN PGP SIGNATURE-----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=QWzW
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2022-02-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"Interrupt chip driver fixes:
- Don't install an hotplug notifier for GICV3-ITS on systems which do
not need it to prevent a warning in the notifier about inconsistent
state
- Add the missing device tree matching for the T-HEAD PLIC variant so
the related SoC is properly supported"
* tag 'irq-urgent-2022-02-13' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/sifive-plic: Add missing thead,c900-plic match string
dt-bindings: update riscv plic compatible string
irqchip/gic-v3-its: Skip HP notifier when no ITS is registered
-----BEGIN PGP SIGNATURE-----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=+cTD
-----END PGP SIGNATURE-----
Merge tag 'objtool_urgent_for_v5.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Borislav Petkov:
"Fix a case where objtool would mistakenly warn about instructions
being unreachable"
* tag 'objtool_urgent_for_v5.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/bug: Merge annotate_reachable() into _BUG_FLAGS() asm
-----BEGIN PGP SIGNATURE-----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=yZ3t
-----END PGP SIGNATURE-----
Merge tag 'x86_urgent_for_v5.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Borislav Petkov:
"Prevent softlockups when tearing down large SGX enclaves"
* tag 'x86_urgent_for_v5.17_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Silence softlockup detection when releasing large enclaves
-----BEGIN PGP SIGNATURE-----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=mhs3
-----END PGP SIGNATURE-----
Merge tag '5.17-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fixes from Steve French:
"Three small smb3 reconnect fixes and an error log clarification"
* tag '5.17-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: mark sessions for reconnection in helper function
cifs: call helper functions for marking channels for reconnect
cifs: call cifs_reconnect when a connection is marked
[smb3] improve error message when mount options conflict with posix
- Don't register a hotplug notifier on GICv3 systems that advertise
LPI support, but have no ITS to make use of it
- Add missing DT matching for the thead,c900-plic variant of the
SiFive PLIC
-----BEGIN PGP SIGNATURE-----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=LhM1
-----END PGP SIGNATURE-----
Merge tag 'irqchip-fixes-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
- Don't register a hotplug notifier on GICv3 systems that advertise
LPI support, but have no ITS to make use of it
- Add missing DT matching for the thead,c900-plic variant of the
SiFive PLIC
Link: https://lore.kernel.org/r/20220211110038.1179155-1-maz@kernel.org
Two minor fixes in the lpfc driver. One changing the classification
of trace messages and the other fixing a build issue when NVME_FC is
disabled.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYgfi2CYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishcVSAP9QG9X5
41l/2UW16Vs/i3CuV1aYMh4s2RO8w0pe3GFJxgD/XHLDQbSdogzk1e92W6NqRxnZ
b5zoxlpCfUSjcXdSvTY=
=QTpY
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two minor fixes in the lpfc driver. One changing the classification of
trace messages and the other fixing a build issue when NVME_FC is
disabled"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: lpfc: Reduce log messages seen after firmware download
scsi: lpfc: Remove NVMe support if kernel has NVME_FC disabled
Here are a small number of char/misc driver fixes for 5.17-rc4 for
reported issues. They contain:
- phy driver fixes
- iio driver fix
- eeprom driver fix
- speakup regression fix
- fastrpc fix
All of these have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYgeJoA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yngawCfRWNh5Z6SkxTywmnqQfCjRXYu0M4AoKGGADze
XGOFQL9ZIy1HAGNHZ16e
=yzGK
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are a small number of char/misc driver fixes for 5.17-rc4 for
reported issues. They contain:
- phy driver fixes
- iio driver fix
- eeprom driver fix
- speakup regression fix
- fastrpc fix
All of these have been in linux-next with no reported issues"
* tag 'char-misc-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
iio: buffer: Fix file related error handling in IIO_BUFFER_GET_FD_IOCTL
speakup-dectlk: Restore pitch setting
bus: mhi: pci_generic: Add mru_default for Cinterion MV31-W
bus: mhi: pci_generic: Add mru_default for Foxconn SDX55
eeprom: ee1004: limit i2c reads to I2C_SMBUS_BLOCK_MAX
misc: fastrpc: avoid double fput() on failed usercopy
phy: dphy: Correct clk_pre parameter
phy: phy-mtk-tphy: Fix duplicated argument in phy-mtk-tphy
phy: stm32: fix a refcount leak in stm32_usbphyc_pll_enable()
phy: xilinx: zynqmp: Fix bus width setting for SGMII
phy: cadence: Sierra: fix error handling bugs in probe()
phy: ti: Fix missing sentinel for clk_div_table
phy: broadcom: Kconfig: Fix PHY_BRCM_USB config option
phy: usb: Leave some clocks running during suspend
Here are 2 staging driver fixes for 5.17-rc4. These are:
- fbtft error path fix
- vc04_services rcu dereference fix
Both of these have been in linux-next for a while with no reported
issues
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYgeKDg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynaBQCgrJLuinqny9Gfub/ZllXmn3zDLB4Ani5v+Cg+
Muq0L6io5S8TB9uk24Q0
=+fd7
-----END PGP SIGNATURE-----
Merge tag 'staging-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pullstaging driver fixes from Greg KH:
"Here are two staging driver fixes for 5.17-rc4. These are:
- fbtft error path fix
- vc04_services rcu dereference fix
Both of these have been in linux-next for a while with no reported
issues"
* tag 'staging-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: fbtft: Fix error path in fbtft_driver_module_init()
staging: vc04_services: Fix RCU dereference check
Here are 4 small tty/serial fixes for 5.17-rc4. They are:
- 8250_pericom change revert to fix a reported regression
- 2 speculation fixes for vt_ioctl
- n_tty regression fix for polling
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYgeKng8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymATwCfRHoXJb38W5cXnHvOZgXpj71e0v0AoLeSOmYf
OvSNZAhNF/kOHMbczUs9
=4Rr0
-----END PGP SIGNATURE-----
Merge tag 'tty-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are four small tty/serial fixes for 5.17-rc4. They are:
- 8250_pericom change revert to fix a reported regression
- two speculation fixes for vt_ioctl
- n_tty regression fix for polling
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
vt_ioctl: add array_index_nospec to VT_ACTIVATE
vt_ioctl: fix array_index_nospec in vt_setactivate
serial: 8250_pericom: Revert "Re-enable higher baud rates"
n_tty: wake up poll(POLLRDNORM) on receiving data
Here are some small USB driver fixes for 5.17-rc4 that resolve some
reported issues and add new device ids:
- usb-serial new device ids
- ulpi cleanup fixes
- f_fs use-after-free fix
- dwc3 driver fixes
- ax88179_178a usb network driver fix
- usb gadget fixes
There is a revert at the end of this series to resolve a build problem
that 0-day found yesterday. Most of these have been in linux-next,
except for the last few, and all have now passed 0-day tests.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYgeLiw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylpQACaAnwfFoAxK5yr2IEu5WmxPmY0pSkAnROqF4JO
CQhohQ61DjpdK0ikJWsZ
=n8Yn
-----END PGP SIGNATURE-----
Merge tag 'usb-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes for 5.17-rc4 that resolve some
reported issues and add new device ids:
- usb-serial new device ids
- ulpi cleanup fixes
- f_fs use-after-free fix
- dwc3 driver fixes
- ax88179_178a usb network driver fix
- usb gadget fixes
There is a revert at the end of this series to resolve a build problem
that 0-day found yesterday. Most of these have been in linux-next,
except for the last few, and all have now passed 0-day tests"
* tag 'usb-5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
Revert "usb: dwc2: drd: fix soft connect when gadget is unconfigured"
usb: dwc2: drd: fix soft connect when gadget is unconfigured
usb: gadget: rndis: check size of RNDIS_MSG_SET command
USB: gadget: validate interface OS descriptor requests
usb: core: Unregister device on component_add() failure
net: usb: ax88179_178a: Fix out-of-bounds accesses in RX fixup
usb: dwc3: gadget: Prevent core from processing stale TRBs
USB: serial: cp210x: add CPI Bulk Coin Recycler id
USB: serial: cp210x: add NCR Retail IO box id
USB: serial: ftdi_sio: add support for Brainboxes US-159/235/320
usb: gadget: f_uac2: Define specific wTerminalType
usb: gadget: udc: renesas_usb3: Fix host to USB_ROLE_NONE transition
usb: raw-gadget: fix handling of dual-direction-capable endpoints
usb: usb251xb: add boost-up property support
usb: ulpi: Call of_node_put correctly
usb: ulpi: Move of_node_put to ulpi_dev_release
USB: serial: option: add ZTE MF286D modem
USB: serial: ch341: add support for GW Instek USB2.0-Serial devices
usb: f_fs: Fix use-after-free for epfile
usb: dwc3: xilinx: fix uninitialized return value
- Maintainers and reviewers changes:
- Add Alexander Gordeev as maintainer for s390.
- Christian Borntraeger will focus on s390 KVM maintainership and
stays as s390 reviewer.
- Fix clang build of modules loader KUnit test.
- Fix kernel panic in CIO code on FCES path-event when no driver is
attached to a device or the driver does not provide the path_event
function.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmIHm8UACgkQjYWKoQLX
FBh6Ewf+MoZL00Em5DMTEPzttNm9z33fhau490ELfmlub9o83mTiBlK/mlLIrvg+
H6C1mVqp+Ko9r7teHF4f3l78oxl+Ev85VOGL52UtfIG6jbxy3p8p7+5Rj9TYuvel
kmQltCIqYhTwEt1DUA2SqDqyvxFagwk6TEuOvV1lUi2BK7HsRuGMAJ0usX3LMJrm
V61rIZwgHu3rsisp3HxyDU3bMz9tHoSPYMbIDIjs88twHr1QkIbfR2dPPbBEAaQz
1b2c/apLlwY8veKHlYACj4cdSSd8wdVQo9YEAZv/pPHaYArzl2pli78/AcMl5lh4
0i2MsoYig51di5sXf1NAeatB8DpFgQ==
=pB3f
-----END PGP SIGNATURE-----
Merge tag 's390-5.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Vasily Gorbik:
"Maintainers and reviewers changes:
- Add Alexander Gordeev as maintainer for s390.
- Christian Borntraeger will focus on s390 KVM maintainership and
stays as s390 reviewer.
Fixes:
- Fix clang build of modules loader KUnit test.
- Fix kernel panic in CIO code on FCES path-event when no driver is
attached to a device or the driver does not provide the path_event
function"
* tag 's390-5.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cio: verify the driver availability for path_event call
s390/module: fix building test_modules_helpers.o with clang
MAINTAINERS: downgrade myself to Reviewer for s390
MAINTAINERS: add Alexander Gordeev as maintainer for s390
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYgd+vgAKCRCAXGG7T9hj
vrMKAQCGIOlp3iLisC9ZbzZF2SkeEPW602QF0LC3hexPKgtD/wD/dPeU33MtzkIC
d53GcdcDUBv4ByYKz6/tGPiZhzQSEwI=
=nm20
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.17a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
- Two small cleanups
- Another fix for addressing the EFI framebuffer above 4GB when running
as Xen dom0
- A patch to let Xen guests use reserved bits in MSI- and IO-APIC-
registers for extended APIC-IDs the same way KVM guests are doing it
already
* tag 'for-linus-5.17a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/pci: Make use of the helper macro LIST_HEAD()
xen/x2apic: Fix inconsistent indenting
xen/x86: detect support for extended destination ID
xen/x86: obtain full video frame buffer address for Dom0 also under EFI
- Force HANDLER_EXIT even for SIGNAL_UNKILLABLE.
- Make seccomp self-destruct after fatal filter results.
- Update seccomp samples for easier behavioral demonstration.
-----BEGIN PGP SIGNATURE-----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=zpOl
-----END PGP SIGNATURE-----
Merge tag 'seccomp-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp fixes from Kees Cook:
"This fixes a corner case of fatal SIGSYS being ignored since v5.15.
Along with the signal fix is a change to seccomp so that seeing
another syscall after a fatal filter result will cause seccomp to kill
the process harder.
Summary:
- Force HANDLER_EXIT even for SIGNAL_UNKILLABLE
- Make seccomp self-destruct after fatal filter results
- Update seccomp samples for easier behavioral demonstration"
* tag 'seccomp-v5.17-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
samples/seccomp: Adjust sample to also provide kill option
seccomp: Invalidate seccomp mode to catch death failures
signal: HANDLER_EXIT should clear SIGNAL_UNKILLABLE
Merge misc fixes from Andrew Morton:
"5 patches.
Subsystems affected by this patch series: binfmt, procfs, and mm
(vmscan, memcg, and kfence)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kfence: make test case compatible with run time set sample interval
mm: memcg: synchronize objcg lists with a dedicated spinlock
mm: vmscan: remove deadlock due to throttling failing to make progress
fs/proc: task_mmu.c: don't read mapcount for migration entry
fs/binfmt_elf: fix PT_LOAD p_align values for loaders
When the KCONFIG_AUTOCONFIG is specified (e.g. export \
KCONFIG_AUTOCONFIG=output/config/auto.conf), the directory of
include/config/ will not be created, so kconfig can't create deps
files in it and auto.conf can't be generated.
Signed-off-by: Jing Leng <jleng@ambarella.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
