[ Upstream commit 2e4c4717b3 ]
If the slot duration is 0, the firmware timer will trigger timer hang at
the timer initializing state in a low rate due to hardware algorithm.
Signed-off-by: Ching-Te Ku <ku920601@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250205013233.10945-2-pkshih@realtek.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8425f5c8f0 ]
Don't call ltecoex_read_reg() and ltecoex_reg_write() when the
ltecoex_addr member of struct rtw_chip_info is NULL. The RTL8814AU
doesn't have this feature.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/55b5641f-094e-4f94-9f79-ac053733f2cf@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e8243025c ]
After the firmware is uploaded, download_firmware_validate() checks some
bits in REG_MCUFW_CTRL to see if everything went okay. The
RTL8814AU power on sequence sets bits 13 and 12 to 2, which this
function does not expect, so it thinks the firmware upload failed.
Make download_firmware_validate() ignore bits 13 and 12.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/049d2887-22fc-47b7-9e59-62627cb525f8@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17207d0bb2 ]
When zeroing a range of folios on the filesystem which block size is
less than the page size, the file's mapped blocks within one page will
be marked as unwritten, we should remove writable userspace mappings to
ensure that ext4_page_mkwrite() can be called during subsequent write
access to these partial folios. Otherwise, data written by subsequent
mmap writes may not be saved to disk.
$mkfs.ext4 -b 1024 /dev/vdb
$mount /dev/vdb /mnt
$xfs_io -t -f -c "pwrite -S 0x58 0 4096" -c "mmap -rw 0 4096" \
-c "mwrite -S 0x5a 2048 2048" -c "fzero 2048 2048" \
-c "mwrite -S 0x59 2048 2048" -c "close" /mnt/foo
$od -Ax -t x1z /mnt/foo
000000 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58
*
000800 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59 59
*
001000
$umount /mnt && mount /dev/vdb /mnt
$od -Ax -t x1z /mnt/foo
000000 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58 58
*
000800 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
001000
Fix this by introducing ext4_truncate_page_cache_block_range() to remove
writable userspace mappings when truncating a partial folio range.
Additionally, move the journal data mode-specific handlers and
truncate_pagecache_range() into this function, allowing it to serve as a
common helper that correctly manages the page cache in preparation for
block range manipulations.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20241220011637.1157197-2-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 43d0105e2c ]
There is no need to write back all data before punching a hole in
non-journaled mode since it will be dropped soon after removing space.
Therefore, the call to filemap_write_and_wait_range() can be eliminated.
Besides, similar to ext4_zero_range(), we must address the case of
partially punched folios when block size < page size. It is essential to
remove writable userspace mappings to ensure that the folio can be
faulted again during subsequent mmap write access.
In journaled mode, we need to write dirty pages out before discarding
page cache in case of crash before committing the freeing data
transaction, which could expose old, stale data, even if synchronization
has been performed.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Link: https://patch.msgid.link/20241220011637.1157197-4-yi.zhang@huaweicloud.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c629c972b3 ]
In case a PHY LED implements .blink_set callback to set LED blink
interval, call it even if .hw_control is already set, as that LED
blink interval likely controls the blink rate of that HW offloaded
LED. For PHY LEDs, that can be their activity blinking interval.
The software blinking is not affected by this change.
With this change, the LED interval setting looks something like this:
$ echo netdev > /sys/class/leds/led:green:lan/trigger
$ echo 1 > /sys/class/leds/led:green:lan/brightness
$ echo 250 > /sys/class/leds/led:green:lan/interval
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20250120113740.91807-1-marex@denx.de
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5674609535 ]
The types around kmsg_bytes were inconsistent. The global was unsigned
long, the argument to pstore_set_kmsg_bytes() was int, and the filesystem
option was u32. Given other internal limits, there's not much sense
in making a single pstore record larger than INT_MAX and it can't be
negative, so use u32 everywhere. Additionally, use READ/WRITE_ONCE and a
local variable in pstore_dump() to avoid kmsg_bytes changing during a
dump.
Link: https://lore.kernel.org/r/20250206191655.work.798-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 503d20ed8c ]
Replace use of storagebits with realbits for determining the number of
bytes needed for SPI transfers.
When adding SPI offload support, storagebits will always be 32 rather
than 16 for 16-bit 16-bit chips so we can no longer rely on storagebits
being the correct size expected by the SPI framework (it always uses
4 bytes for > 16-bit xfers and 2 bytes for > 8-bit xfers). Instead,
derive the correct size from realbits since it will always be correct
even when SPI offloading is used.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-vy: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250207-dlech-mainline-spi-engine-offload-2-v8-10-e48a489be48c@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 848b09d53d ]
The Dell AW1022z is an RTL8156B based 2.5G Ethernet controller.
Add the vendor and product ID values to the driver. This makes Ethernet
work with the adapter.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Link: https://patch.msgid.link/20250206224033.980115-1-olek2@wp.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a1ccffd30 ]
The following patch will not set skb->sk from VRF path.
Let's fetch net from fib_rule->fr_net instead of sock_net(skb->sk)
in fib[46]_rule_configure().
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://patch.msgid.link/20250207072502.87775-5-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2ffb26afa6 ]
perf mem report aborts as below sometimes (during some corner
case) in powerpc:
# ./perf mem report 1>out
*** stack smashing detected ***: terminated
Aborted (core dumped)
The backtrace is as below:
__pthread_kill_implementation ()
raise ()
abort ()
__libc_message
__fortify_fail
__stack_chk_fail
hist_entry.lvl_snprintf
__sort__hpp_entry
__hist_entry__snprintf
hists.fprintf
cmd_report
cmd_mem
Snippet of code which triggers the issue
from tools/perf/util/sort.c
static int hist_entry__lvl_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
char out[64];
perf_mem__lvl_scnprintf(out, sizeof(out), he->mem_info);
return repsep_snprintf(bf, size, "%-*s", width, out);
}
The value of "out" is filled from perf_mem_data_src value.
Debugging this further showed that for some corner cases, the
value of "data_src" was pointing to wrong value. This resulted
in bigger size of string and causing stack check fail.
The perf mem data source values are captured in the sample via
isa207_get_mem_data_src function. The initial check is to fetch
the type of sampled instruction. If the type of instruction is
not valid (not a load/store instruction), the function returns.
Since 'commit e16fd7f2cb ("perf: Use sample_flags for data_src")',
data_src field is not initialized by the perf_sample_data_init()
function. If the PMU driver doesn't set the data_src value to zero if
type is not valid, this will result in uninitailised value for data_src.
The uninitailised value of data_src resulted in stack check fail
followed by abort for "perf mem report".
When requesting for data source information in the sample, the
instruction type is expected to be load or store instruction.
In ISA v3.0, due to hardware limitation, there are corner cases
where the instruction type other than load or store is observed.
In ISA v3.0 and before values "0" and "7" are considered reserved.
In ISA v3.1, value "7" has been used to indicate "larx/stcx".
Drop the sample if instruction type has reserved values for this
field with a ISA version check. Initialize data_src to zero in
isa207_get_mem_data_src if the instruction type is not load/store.
Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com>
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250121131621.39054-1-atrajeev@linux.vnet.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67dfc11982 ]
Starting with PAPR level 2.13, platform supports placing PHB in limited
address mode. Devices that support DMA masks less that 64-bit but greater
than 32-bits are placed in limited address mode. In this mode, the
starting DMA address returned by the DDW is 4GB.
When the device driver calls dma_supported, with mask less then 64-bit, the
PowerPC IOMMU driver places PHB in the Limited Addressing Mode before
creating DDW.
Signed-off-by: Gaurav Batra <gbatra@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250108164814.73250-1-gbatra@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6aa989ab2b ]
iommu_mem_notifier() is invoked when RAM is dynamically added/removed. This
notifier call is responsible to add/remove TCEs from the Dynamic DMA Window
(DDW) when TCEs are pre-mapped. TCEs are pre-mapped only for RAM and not
for persistent memory (pmemory). For DMA buffers in pmemory, TCEs are
dynamically mapped when the device driver instructs to do so.
The issue is 'daxctl' command is capable of adding pmemory as "System RAM"
after LPAR boot. The command to do so is -
daxctl reconfigure-device --mode=system-ram dax0.0 --force
This will dynamically add pmemory range to LPAR RAM eventually invoking
iommu_mem_notifier(). The address range of pmemory is way beyond the Max
RAM that the LPAR can have. Which means, this range is beyond the DDW
created for the device, at device initialization time.
As a result when TCEs are pre-mapped for the pmemory range, by
iommu_mem_notifier(), PHYP HCALL returns H_PARAMETER. This failed the
command, daxctl, to add pmemory as RAM.
The solution is to not pre-map TCEs for pmemory.
Signed-off-by: Gaurav Batra <gbatra@linux.ibm.com>
Tested-by: Donet Tom <donettom@linux.ibm.com>
Reviewed-by: Donet Tom <donettom@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250130183854.92258-1-gbatra@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67800d2961 ]
The core is reset both in `fec_restart()` (called on link-up) and
`fec_stop()` (going to sleep, driver remove etc.). These two functions
had their separate implementations, which was at first only a register
write and a `udelay()` (and the accompanying block comment). However,
since then we got soft-reset (MAC disable) and Wake-on-LAN support, which
meant that these implementations diverged, often causing bugs.
For instance, as of now, `fec_stop()` does not check for
`FEC_QUIRK_NO_HARD_RESET`, meaning the MII/RMII mode is cleared on eg.
a PM power-down event; and `fec_restart()` missed the refactor renaming
the "magic" constant `1` to `FEC_ECR_RESET`.
To harmonize current implementations, and eliminate this source of
potential future bugs, refactor implementation to a common function.
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Link: https://patch.msgid.link/20250207121255.161146-2-csokas.bence@prolan.hu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c60179b64 ]
This will be used by the low level driver.
Note that link_id will be 0 in case of a non-MLO authentication.
Also fix a call-site of mgd_prepare_tx() where the link_id was not
populated.
Update the documentation to reflect the current state
ieee80211_prep_tx_info::link_id is also available in mgd_complete_tx().
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.6a590f189ce5.I1fc5c0da26b143f5b07191eb592f01f7083d55ae@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4995cdc4d ]
In the original commit 15fae3410f ("mac80211: notify driver on
mgd TX completion") I evidently made a mistake and placed the
call in the "associated" if, rather than the "assoc_data". Later
I noticed the missing call and placed it in commit c042600c17
("wifi: mac80211: adding missing drv_mgd_complete_tx() call"),
but didn't remove the wrong one. Remove it now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.6ed954179bbf.Id8ef8835b7e6da3bf913c76f77d201017dc8a3c9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1798271b36 ]
We might not have called drv_mgd_prepare_tx(), so only call
drv_mgd_complete_tx() under the same conditions.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205110958.e091fc39a351.Ie6a3cdca070612a0aa4b3c6914ab9ed602d1f456@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 696cca6430 ]
During reprobe, the sw state is being destroyd, and so is the
connection. When the peer STA is being removed, the opmode sends a
command to flush the TXQs of the STA and uses iwl_trans_wait_txq_empty.
This one warns if the FW is not alive, but it really shouldn't if
there is a FW error - and return silently instead, just like we do when
sending a hcmd.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250205145347.76425b10e5a0.I3bf0de2eb090a8b94c4e36d93dd91df61fadb808@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21e4d29ac0 ]
We shouldn't dump the reg_data here which dumps the last
entry again, it should use the imr_reg_data.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250205145347.3313b18667d1.Iaa9ab66b1d397912a573525e060d39ea01b29d19@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 58b21309f9 ]
Since its introduction in commit 892f396c8e ("mptcp: netlink: issue
MP_PRIO signals from userspace PMs"), it was mandatory to specify the
remote address, because of the 'if (rem->addr.family == AF_UNSPEC)'
check done later one.
In theory, this attribute can be optional, but it sounds better to be
precise to avoid sending the MP_PRIO on the wrong subflow, e.g. if there
are multiple subflows attached to the same local ID. This can be relaxed
later on if there is a need to act on multiple subflows with one
command.
For the moment, the check to see if attr_rem is NULL can be removed,
because mptcp_pm_parse_entry() will do this check as well, no need to do
that differently here.
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dff4f278ee ]
Currently, ampdu id is update with peer id mask which is incorrect.
Therefore, update the ampdu id with PPDU id mask value. Also move
the ampdu_id field inside the user stats since it is a user id based
statistics.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.3.1-00173-QCAHKSWPL_SILICONZ-1
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Reviewed-by: Vasanthakumar Thiagarajan <vasanthakumar.thiagarajan@oss.qualcomm.com>
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Link: https://patch.msgid.link/20250206013854.174765-7-quic_periyasa@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3aa43a50a ]
In non-ESN mode, the SEQ numbers are limited to 32 bits and seq_hi/oseq_hi
are not used. So make sure that user gets proper error message, in case
such assignment occurred.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4dd40b5f9c ]
Since the initial commit 57692c94dc ("drm/v3d: Introduce a new DRM driver
for Broadcom V3D V3.x+") the struct v3d_dev reserved a pointer for
an optional V3D clock. But there wasn't any code, which fetched it.
So add the missing clock handling before accessing any V3D registers.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Reviewed-by: Maíra Canal <mcanal@igalia.com>
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20250201125046.33030-1-wahrenst@gmx.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e1d68ea58c ]
For the ECPF and representors, reduce the max MPWRQ size from 256KB (18)
to 128KB (17). This prepares the later patch for saving representor
memory.
With Striding RQ, there is a minimum of 4 MPWQEs. So with 128KB of max
MPWRQ size, the minimal memory is 4 * 128KB = 512KB. When creating page
pool, consider 1500 mtu, the minimal page pool size will be 512KB/4KB =
128 pages = 256 rx ring entries (2 entries per page).
Before this patch, setting RX ringsize (ethtool -G rx) to 256 causes
driver to allocate page pool size more than it needs due to max MPWRQ
is 256KB (18). Ex: 4 * 256KB = 1MB, 1MB/4KB = 256 pages, but actually
128 pages is good enough. Reducing the max MPWRQ to 128KB fixes the
limitation.
Signed-off-by: William Tu <witu@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250209101716.112774-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9cc8f9d70 ]
By experiments, a single queue representor netdev consumes kernel
memory around 2.8MB, and 1.8MB out of the 2.8MB is due to page
pool for the RXQ. Scaling to a thousand representors consumes 2.8GB,
which becomes a memory pressure issue for embedded devices such as
BlueField-2 16GB / BlueField-3 32GB memory.
Since representor netdevs mostly handles miss traffic, and ideally,
most of the traffic will be offloaded, reduce the default non-uplink
rep netdev's RXQ default depth from 1024 to 256 if mdev is ecpf eswitch
manager. This saves around 1MB of memory per regular RQ,
(1024 - 256) * 2KB, allocated from page pool.
With rxq depth of 256, the netlink page pool tool reports
$./tools/net/ynl/cli.py --spec Documentation/netlink/specs/netdev.yaml \
--dump page-pool-get
{'id': 277,
'ifindex': 9,
'inflight': 128,
'inflight-mem': 786432,
'napi-id': 775}]
This is due to mtu 1500 + headroom consumes half pages, so 256 rxq
entries consumes around 128 pages (thus create a page pool with
size 128), shown above at inflight.
Note that each netdev has multiple types of RQs, including
Regular RQ, XSK, PTP, Drop, Trap RQ. Since non-uplink representor
only supports regular rq, this patch only changes the regular RQ's
default depth.
Signed-off-by: William Tu <witu@nvidia.com>
Reviewed-by: Bodong Wang <bodong@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250209101716.112774-8-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a38cc5706f ]
By default, the mq netdev creates a pfifo_fast qdisc. On a
system with 16 core, the pfifo_fast with 3 bands consumes
16 * 3 * 8 (size of pointer) * 1024 (default tx queue len)
= 393KB. The patch sets the tx qlen to representor default
value, 128 (1<<MLX5E_REP_PARAMS_DEF_LOG_SQ_SIZE), which
consumes 16 * 3 * 8 * 128 = 49KB, saving 344KB for each
representor at ECPF.
Signed-off-by: William Tu <witu@nvidia.com>
Reviewed-by: Daniel Jurgens <danielj@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Link: https://patch.msgid.link/20250209101716.112774-9-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95b9606b15 ]
Current loopback test validation ignores non-linear SKB case in
the SKB access, which can lead to failures in scenarios such as
when HW GRO is enabled.
Linearize the SKB so both cases will be handled.
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250209101716.112774-15-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a9304859b ]
In XDP scenarios, fragmented packets can occur if the MTU is larger
than the page size, even when the packet size fits within the linear
part.
If XDP multi-buffer support is disabled, the fragmented part won't be
handled in the TX flow, leading to packet drops.
Since XDP multi-buffer support is always available, this commit removes
the conditional check for enabling it.
This ensures that XDP multi-buffer support is always enabled,
regardless of the `is_xdp_mb` parameter, and guarantees the handling of
fragmented packets in such scenarios.
Signed-off-by: Alexei Lazar <alazar@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20250209101716.112774-16-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33da70bd1e ]
DC supports SW i2c as well. Drop the check.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 667b96134c ]
Some chips have a larger VBIOS file so raise the size limit to support
the flashing tool.
Signed-off-by: Shiwu Zhang <shiwu.zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f7a594e405 ]
There could be configs where some UMC instances are harvested. This
information is obtained through discovery data and populated in
umc.active_mask. Avoid reassigning this as AID mask, instead use the
mask directly while iterating through umc instances. This is to avoid
accesses to harvested UMC instances.
v2: fix warning (Alex)
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f0d1ef6f1 ]
[WHY&HOW]
Address was not previously populated which can result in incorrect
clock frequencies being read on boot.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41df56b1fc ]
[Why/How]
vBlank used to determine the max vStartup is based on the smallest between
the vblank provided by the timing and vblank in ip_caps.
Extra vblank time is not considered if the vblank provided by the timing ends
up being higher than what's defined by the ip_caps
Use 1 less than the vblank size in case the timing is interlaced
so vstartup will always be less than vblank_nom.
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a7810c212 ]
[Why]
It's possible to generate more than 50 steps in hwss_build_fast_sequence,
for example with a 6-pipe asic where all pipes are in one MPC chain. This
overflows the block_sequence buffer and corrupts block_sequence_steps,
causing a crash.
[How]
Expand block_sequence to 100 items. A naive upper bound on the possible
number of steps for a 6-pipe asic, ignoring the potential for steps to be
mutually exclusive, is 91 with current code, therefore 100 is sufficient.
Reviewed-by: Alvin Lee <alvin.lee2@amd.com>
Signed-off-by: Joshua Aberback <joshua.aberback@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8c782cac5 ]
[Why & How]
The initial setting for psr_version is not correct while
create a virtual link.
The default psr_version should be DC_PSR_VERSION_UNSUPPORTED.
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6a7fde4332 ]
[Why]
DP spec updated to have the CR AUX RD interval match the EQ AUX RD
interval interpretation of DPCD 0000Eh/0220Eh for 8b/10b non-LTTPR mode
and LTTPR transparent mode cases.
[How]
Update interpretation of DPCD 0000Eh/0220Eh for CR AUX RD interval
during 8b/10b link training.
Reviewed-by: Michael Strauss <michael.strauss@amd.com>
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: George Shen <george.shen@amd.com>
Signed-off-by: Zaeem Mohamed <zaeem.mohamed@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be704e5ef4 ]
This reverts commit de612738e9.
Reason to revert: screen flashes or gray screen appeared half of the
screen after resume from S4/S5.
Reviewed-by: Charlene Liu <charlene.liu@amd.com>
Signed-off-by: Brandon Syu <Brandon.Syu@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3a5fa55455 ]
[WHY]
Some panels may not handle idle pattern properly during PSR entry.
[HOW]
Add a condition to allow multiple options on power down
sequence during PSR1 entry.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Signed-off-by: Martin Tsai <Martin.Tsai@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e92f3f94ca ]
Reset psp->cmd to NULL after releasing the buffer in function psp_sw_fini().
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Jiang Liu <gerry@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8bffa52e0 ]
[Why]
Setting link DPMS off in response to HPD disconnect creates AUX
transactions on a link that is supposed to be disconnected. This can
cause issues in some cases when the sink re-asserts HPD and expects
source to re-enable the link.
[How]
Avoid AUX transactions on disconnected link.
Reviewed-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b40d022ec0 ]
[why]
currently dml2 is using a hard coded 16 to convert memclk to dram_speed_mts.
for apu, this depends on wck_ratio.
change to pass the already calculated dram_speed_mts from fpu to dml2.
v2: use existing calculation of dram_speed_mts for now to avoid regression
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Roman Li <Roman.Li@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3394b1f76d ]
SDMA writes has to probe invalidate RW lines. Set snoop bit in mmhub for
this to happen.
v2: Missed a few mmhub_v9_4. Added now.
v3: Calculate hub offset once since it doesn't change inside the loop
Modified function names based on review comments.
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ffd56822a ]
In some ASICs L2 cache info may miss in kfd topology,
because the first bitmap may be empty, that means
the first cu may be inactive, so to find the first
active cu will solve the issue.
v2: Only find the first active cu in the first xcc
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1350dd3691 ]
It's GPU page size not CPU page size. In most cases they
are the same, but not always. This can lead to overallocation
on systems with larger pages.
Cc: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8dbf0c7556 ]
Now for dwmac-loongson {tx,rx}_fifo_size are uninitialised, which means
zero. This means dwmac-loongson doesn't support changing MTU because in
stmmac_change_mtu() it requires the fifo size be no less than MTU. Thus,
set the correct tx_fifo_size and rx_fifo_size for it (16KB multiplied by
queue counts).
Here {tx,rx}_fifo_size is initialised with the initial value (also the
maximum value) of {tx,rx}_queues_to_use. So it will keep as 16KB if we
don't change the queue count, and will be larger than 16KB if we change
(decrease) the queue count. However stmmac_change_mtu() still work well
with current logic (MTU cannot be larger than 16KB for stmmac).
Note: the Fixes tag picked here is the oldest commit and key commit of
the dwmac-loongson series "stmmac: Add Loongson platform support".
Acked-by: Yanteng Si <si.yanteng@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Chong Qiao <qiaochong@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Link: https://patch.msgid.link/20250210134328.2755328-1-chenhuacai@loongson.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e738d77f78 ]
Frame shape and curr_dr_freq could be updated by sdw_compute_bus_params().
Peripherals will set curr_dr_freq as their frequency. Managers
should do the same. Then update frame shape according to the actual
bus frequency.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.dev>
Link: https://lore.kernel.org/r/20250205074232.87537-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dcc48a73ea ]
During runtime suspend scenario, SoundWire wake should be enabled and
during system level suspend scenario SoundWire wake should be disabled.
Implement the SoundWire wake enable/disable sequence as per design flow
for SoundWire poweroff mode.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20250207065841.4718-2-Vijendar.Mukunda@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 21860f340b ]
This code's intention is to configure lane0 and lane2 tunings, but for
lane2 there is a typo and it ends up tuning something else.
Fix the typo, as it doesn't appear to make sense to apply different
tunings for lane0 vs lane2.
The same typo appears to exist in the bootloader, hence we restore the
original value in the typo'd registers as well. This can be removed
once / if the bootloader is updated.
Note that this is incorrect in the downstream driver as well - the
values had been copied from there.
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Tested-by: Peter Griffin <peter.griffin@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Tested-by: Will McVicker <willmcvicker@google.com>
Link: https://lore.kernel.org/r/20241206-gs101-phy-lanes-orientation-phy-v4-4-f5961268b149@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
