The chips ops related to RF calibration include init, init_late, channel,
band_change, scan, and track. The init_late is similar to init, but HCI
is ready, so receiving C2H event is possible. The ops channel is the main
function that do all RF calibration on operating channel.
The ops band_change and scan are to reset RF calibration because channel is
switching at these moment, we need to reset RF state. The ops track is to
monitor temperature to check if re-calibrate RF again.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260330065847.48946-4-pkshih@realtek.com
The main set channel function calls MAC/BB/RF ones, and pre-/post- helpers
are called before/after the main function to backup/restore and
stop/restart circuits, including TX scheduler, PPDU status, DACK and TSSI.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260330065847.48946-3-pkshih@realtek.com
The chip_info field rx_freq_frome_ie (RX frequency from Information
Element) has a typo. The function that uses it is already spelled
correctly: rtw89_core_update_rx_freq_from_ie. Rename the field to
match.
Signed-off-by: Christos Longros <chris.longros@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260329074550.114787-1-chris.longros@gmail.com
Let userspace tools like lshw show the firmware version by filling the
fw_version member of struct wiphy.
Before:
configuration: broadcast=yes driver=rtw89_8852au
driverversion=6.19.6-arch1-1 firmware=N/A link=no multicast=yes
wireless=IEEE 802.11
After:
configuration: broadcast=yes driver=rtw89_8852au
driverversion=6.19.6-arch1-1 firmware=0.13.36.2 link=no multicast=yes
wireless=IEEE 802.11
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/a46ed12c-387c-4063-849c-c6457bf97810@gmail.com
Let userspace tools like lshw show the firmware version by filling the
fw_version member of struct wiphy.
Before:
configuration: broadcast=yes driver=rtw88_8814au
driverversion=6.19.6-arch1-1 firmware=N/A link=no multicast=yes
wireless=IEEE 802.11
After:
configuration: broadcast=yes driver=rtw88_8814au
driverversion=6.19.6-arch1-1 firmware=33.6.0 link=no multicast=yes
wireless=IEEE 802.11
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/3701cce1-42c4-4382-9120-cd21012c1b21@gmail.com
Sometimes while watching a Youtube video with Bluetooth headphones the
audio has a lot of interruptions, because the 5th byte of the BT info
sent by RTL8821AU has strange values, which result in
coex_stat->bt_hid_pair_num being 2 or 3. When this happens
rtw_coex_freerun_check() returns true, which causes
rtw_coex_action_wl_connected() to call rtw_coex_action_freerun() instead
of rtw_coex_action_bt_a2dp().
The RTL8821AU vendor driver doesn't do anything with the 5th byte of the
BT info, so ignore it here as well.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/bbf06c83-d2ee-4205-8fbb-829e2347586f@gmail.com
For different A-die, there will be different TX power parameters.
In FW element header, the corresponding A-die ID will be described.
So, compare runtime AID with that to load the target TX power
parameters.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260325072130.41751-9-pkshih@realtek.com
RF parameters are conditional formats with RFE type and CV as arguments,
but RTL8922D has many variants and use ACV as argument instead of CV.
Add to select proper register values.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260325072130.41751-8-pkshih@realtek.com
PHY page range is to define offset from PHY0 to PHY1, and RTL8922D
needs to expand page to 0x2E0.
Signed-off-by: Eric Huang <echuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260325072130.41751-7-pkshih@realtek.com
The pre-load function is a MAC function to pre-load TX packets into
WiFi device's memory, so it can enhance performance. However, RTL8922DE
has not fully verified and fine tune this function, temporarily disable
this function.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260325072130.41751-6-pkshih@realtek.com
The RTL8922D can reuse most mac memory addresses, but only
RTW89_MAC_MEM_SECURITY_CAM is different from existing one. Add a function
to return the specific memory address for RTL8922D.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260325072130.41751-5-pkshih@realtek.com
The PCIE SER is to diagnose PCIE becomes abnormal, relying on IMR settings
to trigger interrupt when status is weird. Update settings to disable
PHY error flag 9, and clear ISR when initial and leaving WoWLAN.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260325072130.41751-4-pkshih@realtek.com
Under MLO connections, the original Magic Packet configuration
only supported Link Addresses for wakeup. Update the setting
to support both MLD Address and Link Addresses for wakeup process.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260325072130.41751-3-pkshih@realtek.com
The WOW wakeup control command is used to tell firmware the content
of wakeup feature. Use struct instead of macros to fill the data.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260325072130.41751-2-pkshih@realtek.com
The set channel of RF part is to configure channel and bandwidth on a
register. The function to encode channel and bandwidth into register
value will be implemented by coming patch.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260324062049.52266-8-pkshih@realtek.com
The set channel of BB part is the main part, which according to channel
and bandwidth to configure CCK SCO, RX gain of LNA and TIA programmed
in efuse for CCK and OFDM rate, and spur elimination of CSI and NBI tones.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260324062049.52266-7-pkshih@realtek.com
The set channel is a key function to switch to specific operating channel.
For MAC part, configure hardware according to channel bandwidth, and
enable CCK rate for 2GHz band only.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260324062049.52266-6-pkshih@realtek.com
The calibration data is from physical map, including 1) thermal trim to
align output thermal value across chips, and 2) PA bias to transmit
expected power by controller.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260324062049.52266-5-pkshih@realtek.com
Define specific efuse map for RTL8922D, including TSSI, RX gain, MAC
address, RFE type and etc. The additional fields comparing to existing
chips are BT setting (define BT switch GPIO, antenna number and etc) and
gain offset2 (define more fields like existing RX gain offset).
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260324062049.52266-4-pkshih@realtek.com
The power on function is the first entry to power on hardware including
all MAC/BB/RF circuits, and then it becomes possible to do high level
operations, such as WiFi scan, connection.
If connection becomes unavailable, device stays into idle mode, calling
power off function to cut power.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260324062049.52266-3-pkshih@realtek.com
The quota is used to configure memory size for TX/RX, and the definition
of registers includes H2C command, C2H event, WoWLAN reason, IMR of CMAC
and DMAC, ACK rate selector, RF kill GPIO, and BB functions of dynamic
initial gain and EDCCA. The layout of efuse block is to define logic
map of efuse, such as MAC address and RF calibration values.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260324062049.52266-2-pkshih@realtek.com
The reported RX rate might be unexpected, causing kernel warns:
Rate marked as a VHT rate but data is invalid: MCS: 0, NSS: 0
WARNING: net/mac80211/rx.c:5491 at ieee80211_rx_list+0x183/0x1020 [mac80211]
As the RX rate can be index of an array under certain conditions, validate
it to prevent accessing array out-of-bound potentially.
Tested on HP Notebook P3S95EA#ACB (kernel 6.19.9-1-cachyos):
- No WARNING: net/mac80211/rx.c:5491 observed after the v2 patch.
The unexpected `NSS: 0, MCS: 0` VHT rate warnings are successfully
mitigated.
- The system remains fully stable through prolonged idle periods,
high network load, active Bluetooth A2DP usage, and multiple deep
suspend/resume cycles.
- Zero h2c timeouts or firmware lps state errors observed in dmesg.
Reported-by: Oleksandr Havrylov <goainwo@gmail.com>
Closes: https://lore.kernel.org/linux-wireless/CALdGYqSMUPnPfW-_q1RgYr0_SjoXUejAaJJr-o+jpwCk1S7ndQ@mail.gmail.com/
Tested-by: Oleksandr Havrylov <goainwo@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260324011001.5742-1-pkshih@realtek.com
In the rtw89_phy_cfo_set_crystal_cap() function, for chips other than
RTL8852A/RTL8851B, the values read by rtw89_mac_read_xtal_si() are
stored into the local variables sc_xi_val and sc_xo_val. If either
read fails, these variables remain uninitialized, they are later
used to update cfo->crystal_cap and in debug print statements. This
can lead to undefined behavior.
Fix the issue by initializing sc_xi_val and sc_xo_val to zero,
like is implemented in vendor driver.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 8379fa6115 ("rtw89: 8852c: add write/read crystal function in CFO tracking")
Signed-off-by: Alexey Velichayshiy <a.velichayshiy@ispras.ru>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260323140613.1615574-1-a.velichayshiy@ispras.ru
On Radxa Rock 5B with a RTL8852BE combo WiFi/BT card, the efuse
physical map dump intermittently fails with -EBUSY during probe.
The failure occurs in rtw89_dump_physical_efuse_map_ddv() where
read_poll_timeout_atomic() times out waiting for the B_AX_EF_RDY
bit after 1 second.
The root cause is a timing race during boot: the WiFi driver's
chip initialization (firmware download via PCIe) overlaps with
Bluetooth firmware download to the same combo chip via USB. This
can leave the efuse controller temporarily unavailable when the
WiFi driver attempts to read the efuse map.
The firmware download path retries up to 5 times, but the efuse
read that follows has no similar logic. Address this by adding
retry loop logic (also up to 5 attempts) around physical efuse
map dump.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260317112155.1939569-1-christianshewitt@gmail.com
When filling out the TX descriptor, Null data frames are treated like
management frames, but QOS Null data frames are treated like normal
data frames. Somehow this causes a problem for the firmware.
When connected to a network in the 2.4 GHz band, wpa_supplicant (or
NetworkManager?) triggers a scan every five minutes. During these scans
mac80211 transmits many QOS Null frames in quick succession. Because
these frames are marked with IEEE80211_TX_CTL_REQ_TX_STATUS, rtw88
asks the firmware to report the TX ACK status for each of these frames.
Sometimes the firmware can't process the TX status requests quickly
enough, they add up, it only processes some of them, and then marks
every subsequent TX status report with the wrong number.
The symptom is that after a while the warning "failed to get tx report
from firmware" appears every five minutes.
This problem apparently happens only with the older RTL8723D, RTL8821A,
RTL8812A, and probably RTL8703B chips.
Treat QOS Null data frames the same way as Null data frames. This seems
to avoid the problem.
Tested with RTL8821AU, RTL8723DU, RTL8811CU, and RTL8812BU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/2b53fb0d-b1ed-47b6-8caa-2bb9ae2acb80@gmail.com
On an HP laptop (P3S95EA#ACB) equipped with a Realtek RTL8821CE 802.11ac
PCIe adapter (PCI ID: 10ec:c821), the system experiences a hard lockup
(complete freeze of the UI and kernel, sysrq doesn't work, requires
holding the power button) when the WiFi adapter enters the power
saving state. Disable PCI ASPM to avoid system freeze.
In addition, driver throws messages periodically. Though this doesn't
always cause unstable connection, missing H2C commands might cause
unpredictable results. Disable deep LPS to avoid this as well.
rtw88_8821ce 0000:13:00.0: firmware failed to leave lps state
rtw88_8821ce 0000:13:00.0: failed to send h2c command
rtw88_8821ce 0000:13:00.0: failed to send h2c command
Tested on HP Notebook P3S95EA#ACB (kernel 6.19.7-1-cachyos):
- No hard freeze observed during idle or active usage.
- Zero h2c or lps errors in dmesg across idle (10 min),
load stress (100MB download), and suspend/resume cycle.
- Both quirk flags confirmed active via sysfs without any
manual modprobe parameters.
Reported-by: Oleksandr Havrylov <goainwo@gmail.com>
Closes: https://lore.kernel.org/linux-wireless/CALdGYqSQ1Ko2TTBhUizMu_FvLMUAuQfFrVwS10n_C-LSQJQQkQ@mail.gmail.com/
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Tested-by: Oleksandr Havrylov <goainwo@gmail.com>
Link: https://patch.msgid.link/20260316035635.16550-1-pkshih@realtek.com
USB RX Aggregation is a performance optimization technique used
in USB network devices to increase throughput.
Instead of sending every received network packet to the host computer
individually, the device hardware groups multiple smaller packets
into a single, large USB Bulk Transfer.
* toAP/toNB use iperf3 respectively.
With Cisco BE6000 - iperf3 tcp 10 pair (to another NB)
[6G 160Mhz]:
RTL8832CU-USB3.0
before after
TX 941 941
RX 847 919
RTL8832CU-USB2.0
before after
TX 293 286
RX 342 356
[5G 80Mhz]:
RTL8832CU-USB3.0
before after
TX 864 877
RX 864 902
RTL8832CU-USB2.0
before after
TX 279 271
RX 327 349
RTL8851BU
before after
TX 115 114
RX 295 306
Signed-off-by: Shin-Yi Lin <isaiah@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260312055724.12177-1-pkshih@realtek.com
Current triggers of Wi-Fi 7 SER (system error recovery) L0/L1 simulation
don't yet guarantee working with PS mode. So, leave PS mode first before
triggering them for now.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260310080146.31113-14-pkshih@realtek.com
Currently, AMSDU length is updated per-link for MLO but not propagated
to the station aggregates, causing suboptimal TX throughput. This change
ensures station aggregates are recalculated when any link's AMSDU length
changes.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260310080146.31113-13-pkshih@realtek.com
Fix connection issue caused by AMPDU frames with abnormal PN patterns
(out-of-order packets with correct MPDU sequence numbers but paired
with abnormal PN values, which is next PN of previous in-order packet).
This is causing packet drops, low throughput and disconnections. It is
observed in fields with some specific AP firmwares. Do this workaround for
better interoperability since some APs could never receive a proper FW
update.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260310080146.31113-12-pkshih@realtek.com
Now, stack has introduced wiphy lock. And, the normal paths calling
RF read/write should be under wiphy lock. So, replace RF mutex with
wiphy lock assertion. Besides, in dbgfs paths, add the corresponding
lock option.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260310080146.31113-11-pkshih@realtek.com
Before entering WoWLAN mode, the driver must ensure that
all received packets have been processed to prevent packet
loss. Consequently, a retry mechanism has been implemented
to guarantee completion.
Signed-off-by: Chin-Yen Lee <timlee@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260310080146.31113-10-pkshih@realtek.com
Since MLD vif can do MLSR switch, it may not always run on HW band 0.
But when preparing MCC for MLD + P2P, P2P vif needs to use HW band 0
to handle connection, i.e. uses of HW bands may be different by vif.
The current major role/vif can be indicated through entity mode. So,
based on it, recalculate MLO DBCC mode to change use of HW band.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260310080146.31113-9-pkshih@realtek.com
The original channel is swapped out for the target channel during ROC.
And, all vifs/links accessing the original channel will be marked with
off-channel. So, it doesn't seem necessary for chan.c to determine which
link instance it is.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260310080146.31113-8-pkshih@realtek.com
The support_mlo flag depends on FW features, so it's determined at runtime.
Since Wi-Fi 7 chip now needs to initialize second HW band, if support_mlo
is not allowed, second HW band might act without settings of TX power and
channel. So, set that for Wi-Fi 7 chip.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260310080146.31113-7-pkshih@realtek.com
Some dynamic mechanism (DM) may need to be disabled during some normal
processes rather than debugging. For example, should not do MLSR switch
during SCAN/ROC or even MCC. So, move the disabling DM functions to core
for impending uses.
No logic changes.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260310080146.31113-6-pkshih@realtek.com
When RA (Rate Adaptive) does try higher rate, a TRY bit is flagged, and
hardware will reference registers configured by this patch as maximum
number of AMPDU. To prevent aggregate too many MPDU over peer's capability
causing loss in peer side, set the minimum values across all stations and
TID since there is single one register per hardware band. Consider MLD
case, a BA session can run across two hardware bands, so set the same
value as well.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260310080146.31113-5-pkshih@realtek.com
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260309083336.16397-1-johan@kernel.org
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260306093206.21081-1-johan@kernel.org
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
This driver takes a reference to the USB device during probe but does
not to release it on all probe errors (e.g. when descriptor parsing
fails).
Drop the redundant device reference to fix the leak, reduce cargo
culting, make it easier to spot drivers where an extra reference is
needed, and reduce the risk of further memory leaks.
Fixes: a82dfd33d1 ("wifi: rtw88: Add common USB chip support")
Reported-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/netdev/2026022319-turbofan-darkened-206d@gregkh/
Cc: stable@vger.kernel.org # 6.2
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260306085144.12064-19-johan@kernel.org
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260306085144.12064-18-johan@kernel.org
Driver core holds a reference to the USB interface and its parent USB
device while the interface is bound to a driver and there is no need to
take additional references unless the structures are needed after
disconnect.
Drop the redundant device reference to reduce cargo culting, make it
easier to spot drivers where an extra reference is needed, and reduce
the risk of memory leaks when drivers fail to release it.
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260306085144.12064-17-johan@kernel.org
The local variables 'mcs' and 'nss' in rtl8xxxu_update_ra_report() are
passed to rtl8xxxu_desc_to_mcsrate() as output parameters. If the helper
function encounters an unhandled rate index, it may return without setting
these values, leading to the use of uninitialized stack data.
Remove the helper rtl8xxxu_desc_to_mcsrate() and inline the logic into
rtl8xxxu_update_ra_report(). This fixes the use of uninitialized 'mcs'
and 'nss' variables for legacy rates.
The new implementation explicitly handles:
- Legacy rates: Set bitrate only.
- HT rates (MCS0-15): Set MCS flags, index, and NSS (1 or 2) directly.
- Invalid rates: Return early.
Fixes: 7de16123d9 ("wifi: rtl8xxxu: Introduce rtl8xxxu_update_ra_report")
Cc: stable@vger.kernel.org
Suggested-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Yi Cong <yicong@kylinos.cn>
Link: https://lore.kernel.org/all/96e31963da0c42dcb52ce44f818963d7@realtek.com/
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20260306071627.56501-1-cong.yi@linux.dev
