commit ca81109d4a upstream.
In ext4_ext_shift_extents(), if the extent is NULL in the while loop, the
function returns immediately without releasing the path obtained via
ext4_find_extent(), leading to a memory leak.
Fix this by jumping to the out label to ensure the path is properly
released.
Fixes: a18ed359bd ("ext4: always check ext4_ext_find_extent result")
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Link: https://patch.msgid.link/20251225084800.905701-1-zilin@seu.edu.cn
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Cc: stable@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 79b592e8f1 upstream.
When the split extent fails, we might leave some extents still being
processed and return an error directly, which will result in stale
extent entries remaining in the extent status tree. So drop all of the
remaining potentially stale extents if the splitting fails.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Cc: stable@kernel.org
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251129103247.686136-8-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d882ea3b0 upstream.
When splitting an unwritten extent in the middle and converting it to
initialized in ext4_split_extent() with the EXT4_EXT_MAY_ZEROOUT and
EXT4_EXT_DATA_VALID2 flags set, it could leave a stale unwritten extent.
Assume we have an unwritten file and buffered write in the middle of it
without dioread_nolock enabled, it will allocate blocks as written
extent.
0 A B N
[UUUUUUUUUUUU] on-disk extent U: unwritten extent
[UUUUUUUUUUUU] extent status tree
[--DDDDDDDD--] D: valid data
|<- ->| ----> this range needs to be initialized
ext4_split_extent() first try to split this extent at B with
EXT4_EXT_DATA_PARTIAL_VALID1 and EXT4_EXT_MAY_ZEROOUT flag set, but
ext4_split_extent_at() failed to split this extent due to temporary lack
of space. It zeroout B to N and leave the entire extent as unwritten.
0 A B N
[UUUUUUUUUUUU] on-disk extent
[UUUUUUUUUUUU] extent status tree
[--DDDDDDDDZZ] Z: zeroed data
ext4_split_extent() then try to split this extent at A with
EXT4_EXT_DATA_VALID2 flag set. This time, it split successfully and
leave an written extent from A to N.
0 A B N
[UUWWWWWWWWWW] on-disk extent W: written extent
[UUUUUUUUUUUU] extent status tree
[--DDDDDDDDZZ]
Finally ext4_map_create_blocks() only insert extent A to B to the extent
status tree, and leave an stale unwritten extent in the status tree.
0 A B N
[UUWWWWWWWWWW] on-disk extent W: written extent
[UUWWWWWWWWUU] extent status tree
[--DDDDDDDDZZ]
Fix this issue by always cached extent status entry after zeroing out
the second part.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Cc: stable@kernel.org
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Message-ID: <20251129103247.686136-7-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8b4b19a2f9 upstream.
Caching extents during the splitting process is risky, as it may result
in stale extents remaining in the status tree. Moreover, in most cases,
the corresponding extent block entries are likely already cached before
the split happens, making caching here not particularly useful.
Assume we have an unwritten extent, and then DIO writes the first half.
[UUUUUUUUUUUUUUUU] on-disk extent U: unwritten extent
[UUUUUUUUUUUUUUUU] extent status tree
|<- ->| ----> dio write this range
First, when ext4_split_extent_at() splits this extent, it truncates the
existing extent and then inserts a new one. During this process, this
extent status entry may be shrunk, and calls to ext4_find_extent() and
ext4_cache_extents() may occur, which could potentially insert the
truncated range as a hole into the extent status tree. After the split
is completed, this hole is not replaced with the correct status.
[UUUUUUU|UUUUUUUU] on-disk extent U: unwritten extent
[UUUUUUU|HHHHHHHH] extent status tree H: hole
Then, the outer calling functions will not correct this remaining hole
extent either. Finally, if we perform a delayed buffer write on this
latter part, it will re-insert the delayed extent and cause an error in
space accounting.
In adition, if the unwritten extent cache is not shrunk during the
splitting, ext4_cache_extents() also conflicts with existing extents
when caching extents. In the future, we will add checks when caching
extents, which will trigger a warning. Therefore, Do not cache extents
that are being split.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Cc: stable@kernel.org
Message-ID: <20251129103247.686136-6-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1bf6974822 upstream.
When allocating initialized blocks from a large unwritten extent, or
when splitting an unwritten extent during end I/O and converting it to
initialized, there is currently a potential issue of stale data if the
extent needs to be split in the middle.
0 A B N
[UUUUUUUUUUUU] U: unwritten extent
[--DDDDDDDD--] D: valid data
|<- ->| ----> this range needs to be initialized
ext4_split_extent() first try to split this extent at B with
EXT4_EXT_DATA_ENTIRE_VALID1 and EXT4_EXT_MAY_ZEROOUT flag set, but
ext4_split_extent_at() failed to split this extent due to temporary lack
of space. It zeroout B to N and mark the entire extent from 0 to N
as written.
0 A B N
[WWWWWWWWWWWW] W: written extent
[SSDDDDDDDDZZ] Z: zeroed, S: stale data
ext4_split_extent() then try to split this extent at A with
EXT4_EXT_DATA_VALID2 flag set. This time, it split successfully and left
a stale written extent from 0 to A.
0 A B N
[WW|WWWWWWWWWW]
[SS|DDDDDDDDZZ]
Fix this by pass EXT4_EXT_DATA_PARTIAL_VALID1 to ext4_split_extent_at()
when splitting at B, don't convert the entire extent to written and left
it as unwritten after zeroing out B to N. The remaining work is just
like the standard two-part split. ext4_split_extent() will pass the
EXT4_EXT_DATA_VALID2 flag when it calls ext4_split_extent_at() for the
second time, allowing it to properly handle the split. If the split is
successful, it will keep extent from 0 to A as unwritten.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Cc: stable@kernel.org
Message-ID: <20251129103247.686136-3-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 22784ca541 upstream.
When splitting an extent, if the EXT4_GET_BLOCKS_CONVERT flag is set and
it is necessary to split the target extent in the middle,
ext4_split_extent() first handles splitting the latter half of the
extent and passes the EXT4_EXT_DATA_VALID1 flag. This flag implies that
all blocks before the split point contain valid data; however, this
assumption is incorrect.
Therefore, subdivid EXT4_EXT_DATA_VALID1 into
EXT4_EXT_DATA_ENTIRE_VALID1 and EXT4_EXT_DATA_PARTIAL_VALID1, which
indicate that the first half of the extent is either entirely valid or
only partially valid, respectively. These two flags cannot be set
simultaneously.
This patch does not use EXT4_EXT_DATA_PARTIAL_VALID1, it only replaces
EXT4_EXT_DATA_VALID1 with EXT4_EXT_DATA_ENTIRE_VALID1 at the location
where it is set, no logical changes.
Signed-off-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Cc: stable@kernel.org
Message-ID: <20251129103247.686136-2-yi.zhang@huaweicloud.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 30bfc2d6a1 upstream.
On MIPS, __current_thread_info is defined as global register variable
locating in $gp, and is simply assigned with new address during kernel
relocation.
This however is broken with LLVM, which always restores $gp if it finds
$gp is clobbered in any form, including when intentionally through a
global register variable. This is against GCC's documentation[1], which
requires a callee-saved register used as global register variable not to
be restored if it's clobbered.
As a result, $gp will continue to point to the unrelocated kernel after
the epilog of relocate_kernel(), leading to an early crash in init_idle,
[ 0.000000] CPU 0 Unable to handle kernel paging request at virtual address 0000000000000000, epc == ffffffff81afada8, ra == ffffffff81afad90
[ 0.000000] Oops[#1]:
[ 0.000000] CPU: 0 UID: 0 PID: 0 Comm: swapper Tainted: G W 6.19.0-rc5-00262-gd3eeb99bbc99-dirty #188 VOLUNTARY
[ 0.000000] Tainted: [W]=WARN
[ 0.000000] Hardware name: loongson,loongson64v-4core-virtio
[ 0.000000] $ 0 : 0000000000000000 0000000000000000 0000000000000001 0000000000000000
[ 0.000000] $ 4 : ffffffff80b80ec0 ffffffff80b53d48 0000000000000000 00000000000f4240
[ 0.000000] $ 8 : 0000000000000100 ffffffff81d82f80 ffffffff81d82f80 0000000000000001
[ 0.000000] $12 : 0000000000000000 ffffffff81776f58 00000000000005da 0000000000000002
[ 0.000000] $16 : ffffffff80b80e40 0000000000000000 ffffffff80b81614 9800000005dfbe80
[ 0.000000] $20 : 00000000540000e0 ffffffff81980000 0000000000000000 ffffffff80f81c80
[ 0.000000] $24 : 0000000000000a26 ffffffff8114fb90
[ 0.000000] $28 : ffffffff80b50000 ffffffff80b53d40 0000000000000000 ffffffff81afad90
[ 0.000000] Hi : 0000000000000000
[ 0.000000] Lo : 0000000000000000
[ 0.000000] epc : ffffffff81afada8 init_idle+0x130/0x270
[ 0.000000] ra : ffffffff81afad90 init_idle+0x118/0x270
[ 0.000000] Status: 540000e2 KX SX UX KERNEL EXL
[ 0.000000] Cause : 00000008 (ExcCode 02)
[ 0.000000] BadVA : 0000000000000000
[ 0.000000] PrId : 00006305 (ICT Loongson-3)
[ 0.000000] Process swapper (pid: 0, threadinfo=(____ptrval____), task=(____ptrval____), tls=0000000000000000)
[ 0.000000] Stack : 9800000005dfbf00 ffffffff8178e950 0000000000000000 0000000000000000
[ 0.000000] 0000000000000000 ffffffff81970000 000000000000003f ffffffff810a6528
[ 0.000000] 0000000000000001 9800000005dfbe80 9800000005dfbf00 ffffffff81980000
[ 0.000000] ffffffff810a6450 ffffffff81afb6c0 0000000000000000 ffffffff810a2258
[ 0.000000] ffffffff81d82ec8 ffffffff8198d010 ffffffff81b67e80 ffffffff8197dd98
[ 0.000000] ffffffff81d81c80 ffffffff81930000 0000000000000040 0000000000000000
[ 0.000000] 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 0.000000] 0000000000000000 000000000000009e ffffffff9fc01000 0000000000000000
[ 0.000000] 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 0.000000] 0000000000000000 ffffffff81ae86dc ffffffff81b3c741 0000000000000002
[ 0.000000] ...
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff81afada8>] init_idle+0x130/0x270
[ 0.000000] [<ffffffff81afb6c0>] sched_init+0x5c8/0x6c0
[ 0.000000] [<ffffffff81ae86dc>] start_kernel+0x27c/0x7a8
This bug has been reported to LLVM[2] and affects version from (at
least) 18 to 21. Let's work around this by using inline assembly to
assign $gp before a fix is widely available.
Cc: stable@vger.kernel.org
Link: https://gcc.gnu.org/onlinedocs/gcc-15.2.0/gcc/Global-Register-Variables.html # [1]
Link: https://github.com/llvm/llvm-project/issues/176546 # [2]
Signed-off-by: Yao Zi <me@ziyao.cc>
Acked-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f0157ce46c ]
The plane scaling hw seems to have the same min/max plane scaling limits
for all 16 bpc / 64 bpp interleaved pixel color formats.
Therefore add cases to amdgpu_dm_plane_get_min_max_dc_plane_scaling() for
all the 16 bpc fixed-point / unorm formats to use the same .fp16
up/downscaling factor limits as used by the fp16 floating point formats.
So far, 16 bpc unorm formats were not handled, and the default: path
returned max/min factors for 32 bpp argb8888 formats, which were wrong
and bigger than what many DCE / DCN hw generations could handle.
The result sometimes was misscaling of framebuffers with
DRM_FORMAT_XRGB16161616, DRM_FORMAT_ARGB16161616, DRM_FORMAT_XBGR16161616,
DRM_FORMAT_ABGR16161616, leading to very wrong looking display, as tested
on Polaris11 / DCE-11.2.
So far this went unnoticed, because only few userspace clients used such
16 bpc unorm framebuffers, and those didn't use hw plane scaling, so they
did not experience this issue.
With upcoming Mesa 26 exposing 16 bpc unorm formats under both OpenGL
and Vulkan under Wayland, and the upcoming GNOME 50 Mutter Wayland
compositor allowing for direct scanout of these formats, the scaling
hw will be used on these formats if possible for HiDPI display scaling,
so it is important to use the correct hw scaling limits to avoid wrong
display.
Tested on AMD Polaris 11 / DCE 11.2 with upcoming Mesa 26 and GNOME 50
on HiDPI displays with scaling enabled. The mutter Wayland compositor now
correctly falls back to scaling via desktop compositing instead of direct
scanout, thereby avoiding wrong image display. For unscaled mode, it
correctly uses direct scanout.
Fixes: 580204038f ("drm/amd/display: Enable support for 16 bpc fixed-point framebuffers.")
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Tested-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0783052534 ]
Drivers will not always call set_sysclk() for all clocks, especially when
default mclk-fs can be used.
When that is the case, use the clock rate set in the params multiplied by the
default mclk-fs.
Fixes: 5323186e2e ("ASoC: rockchip: i2s_tdm: Re-add the set_sysclk callback")
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Reported-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Link: https://patch.msgid.link/20260218201834.924358-1-detlev.casanova@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 705d01c8d7 ]
The function idle_thread_get() can return an error pointer and is not
checked for it. Add check for error pointer.
Detected by Smatch:
arch/x86/hyperv/hv_vtl.c:126 hv_vtl_bringup_vcpu() error:
'idle' dereferencing possible ERR_PTR()
Fixes: 2b4b90e053 ("x86/hyperv: Use per cpu initial stack for vtl context")
Signed-off-by: Ethan Tidmore <ethantidmore06@gmail.com>
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ecb7c2484c ]
If btrfs_search_slot_for_read() returns 1, it means we did not find any
key greater than or equals to the key we asked for, meaning we have
reached the end of the tree and therefore the path is not valid. If
this happens we need to break out of the loop and stop, instead of
continuing and accessing an invalid path.
Fixes: 5223cc60b4 ("btrfs: drop the path before adding qgroup items when enabling qgroups")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2155d0c0a7 ]
When initializing the delayed refs block reserve for a transaction handle
we are passing a type of BTRFS_BLOCK_RSV_DELOPS, which is meant for
delayed items and not for delayed refs. The correct type for delayed refs
is BTRFS_BLOCK_RSV_DELREFS.
On release of any excess space reserved in a local delayed refs reserve,
we also should transfer that excess space to the global block reserve
(it it's full, we return to the space info for general availability).
By initializing a transaction's local delayed refs block reserve with a
type of BTRFS_BLOCK_RSV_DELOPS, we were also causing any excess space
released from the delayed block reserve (fs_info->delayed_block_rsv, used
for delayed inodes and items) to be transferred to the global block
reserve instead of the global delayed refs block reserve. This was an
unintentional change in commit 28270e25c6 ("btrfs: always reserve space
for delayed refs when starting transaction"), but it's not particularly
serious as things tend to cancel out each other most of the time and it's
relatively rare to be anywhere near exhaustion of the global reserve.
Fix this by initializing a transaction's local delayed refs reserve with
a type of BTRFS_BLOCK_RSV_DELREFS and making btrfs_block_rsv_release()
attempt to transfer unused space from such a reserve into the global block
reserve, just as we did before that commit for when the block reserve is
a delayed refs rsv.
Reported-by: Alex Lyakas <alex.lyakas@zadara.com>
Link: https://lore.kernel.org/linux-btrfs/CAOcd+r0FHG5LWzTSu=LknwSoqxfw+C00gFAW7fuX71+Z5AfEew@mail.gmail.com/
Fixes: 28270e25c6 ("btrfs: always reserve space for delayed refs when starting transaction")
Reviewed-by: Alex Lyakas <alex.lyakas@zadara.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0862438c90 ]
The reserve_unaccepted() function incorrectly calculates the size of the
memblock reservation for the unaccepted memory table. It aligns the
size of the table, but fails to account for cases where the table's
starting physical address (efi.unaccepted) is not page-aligned.
If the table starts at an offset within a page and its end crosses into
a subsequent page that the aligned size does not cover, the end of the
table will not be reserved. This can lead to the table being overwritten
or inaccessible, causing a kernel panic in accept_memory().
This issue was observed when starting Intel TDX VMs with specific memory
sizes (e.g., > 64GB).
Fix this by calculating the end address first (including the unaligned
start) and then aligning it up, ensuring the entire range is covered
by the reservation.
Fixes: 8dbe33956d ("efi/unaccepted: Make sure unaccepted table is mapped")
Reported-by: Moritz Sanft <ms@edgeless.systems>
Signed-off-by: Kiryl Shutsemau (Meta) <kas@kernel.org>
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc6387a2e0 ]
The PSS_CHICKEN register has been part of the RCS engine's LRC since it
was first introduced in Xe_LP. That means that any workarounds that
adjust its value (such as Wa_14019988906 and Wa_14019877138) need to be
implemented in the lrc_was[] table so that they become part of the
default LRC from which all subsequent LRCs are copied. Although these
workarounds were implemented correctly on most platforms, they were
incorrectly placed on the engine_was[] table for Xe2_HPG.
Move the workarounds to the proper lrc_was[] table and switch the
'xe_rtp_match_first_render_or_compute' rule to specifically match the
RCS since that's the engine whose LRC manages the register.
Bspec: 65182
Fixes: 7f3ee7d880 ("drm/xe/xe2hpg: Add initial GT workarounds")
Reviewed-by: Shekhar Chauhan <shekhar.chauhan@intel.com>
Link: https://patch.msgid.link/20260205220508.51905-2-matthew.d.roper@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit e04c609eed)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a9b4e1fa5 ]
xe_mmio_read64_2x32() was adjusting register addresses and then
calling xe_mmio_read32(), which applies the adjustment again.
This may shift accesses twice if adj_offset < adj_limit. There is
no issue currently, as for media gt, adj_offset > adj_limit, so
the 2nd adjust will be a no-op. But it may not work in future.
To fix it, replace the adjusted-address comparison with a direct
sanity check that ensures the MMIO address adjustment cutoff never
falls within the 8-byte range of a 64-bit register. And let
xe_mmio_read32() handle address translation.
v2: rewrite the sanity check in a more natural way. (Matt)
v3: Add Fixes tag. (Jani)
Fixes: 07431945d8 ("drm/xe: Avoid 64-bit register reads")
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Link: https://patch.msgid.link/20260130165621.471408-2-shuicheng.lin@intel.com
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
(cherry picked from commit a30f999681)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a84590c5ce ]
Since much of the MMIO register access done by the driver is to non-GT
registers, use of 'xe_gt' in these interfaces has been a long-standing
design flaw that's been hard to disentangle.
To avoid a flag day across the whole driver, munge the function names
and add temporary compatibility macros with the original function names
that can accept either the new xe_mmio or the old xe_gt structure as a
parameter. This will allow us to slowly convert parts of the driver
over to the new interface independently.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240910234719.3335472-54-matthew.d.roper@intel.com
Stable-dep-of: 4a9b4e1fa5 ("drm/xe/mmio: Avoid double-adjust in 64-bit reads")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fb5d1a1d3 ]
Although we want to break the GT-centric nature of the MMIO code in the
general driver, the SRIOV handling still relies on data in a VF
substructure of the GT. So add a GT backpointer, but name it
sriov_vf_gt to make it clear that it's only for this one specific
special case and will not be set or usable for anything else.
v2:
- Store backpointer to the GT itself rather than the SRIOV-specific
substructure. (Michal)
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> # v1
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240910234719.3335472-53-matthew.d.roper@intel.com
Stable-dep-of: 4a9b4e1fa5 ("drm/xe/mmio: Avoid double-adjust in 64-bit reads")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1877c88fa9 ]
Once MMIO operations stop being (incorrectly) tied to a GT, we'll still
need a backpointer for feature checks, message logging, and tracepoints.
Use a tile backpointer since that may allow the most useful debugging
output, while also providing access to the xe_device.
v2:
- Make backpointer an xe_tile instead of xe_device. (Michal)
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> # v1
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240910234719.3335472-52-matthew.d.roper@intel.com
Stable-dep-of: 4a9b4e1fa5 ("drm/xe/mmio: Avoid double-adjust in 64-bit reads")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 960a83799f ]
The mmio_ext stuff is completely unused right now, but it isn't
providing any functionality that couldn't be treated as a regular mmio
space.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240910234719.3335472-51-matthew.d.roper@intel.com
Stable-dep-of: 4a9b4e1fa5 ("drm/xe/mmio: Avoid double-adjust in 64-bit reads")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa599b8c95 ]
Each GT should share the same register iomap as its parent tile. Future
patches will switch to access the iomap through the GT's mmio substruct
rather than through the tile.
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240910234719.3335472-50-matthew.d.roper@intel.com
Stable-dep-of: 4a9b4e1fa5 ("drm/xe/mmio: Avoid double-adjust in 64-bit reads")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d383916a5 ]
By moving the GSI adjustment fields into 'struct xe_mmio' we can replace
the GT's MMIO substructure with another instance of xe_mmio. At the
moment this means MMIO operations wind up pulling information from two
different places (the tile's xe_mmio for the iomap and the GT's xe_mmio
for the adjustment), but we'll address that in future patches.
The type headers change a bit with this change, meaning that various
files should be including xe_device_types.h instead of (or in addition
to) xe_gt_types.h.
v2:
- Fix pre-existing kerneldoc typo while moving the fields (Lucas)
v3:
- Add missing '@' in kerneldoc. (Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240910234719.3335472-49-matthew.d.roper@intel.com
Stable-dep-of: 4a9b4e1fa5 ("drm/xe/mmio: Avoid double-adjust in 64-bit reads")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4aff99aef ]
xe_mmio currently has a size parameter that is assigned but never used
anywhere. The current values assigned appear to be the size of the BAR
region assigned for the tile (both for registers and other purposes such
as the GGTT). Since the current field isn't being used for anything,
change the assignments to 4MB (the size of the register region on all
current platform) and rename the field to 'regs_size' to more clearly
describe what it represents. We can use this value in later patches to
help ensure no register accesses accidentally go past the end of the
desired register space (which might not be caught easily if they still
fall within the iomap).
v2:
- s/regs_length/regs_size/ (Lucas)
- Clarify kerneldoc description (Lucas)
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240910234719.3335472-48-matthew.d.roper@intel.com
Stable-dep-of: 4a9b4e1fa5 ("drm/xe/mmio: Avoid double-adjust in 64-bit reads")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34953ee349 ]
Pull the 'mmio' substructure from xe_tile out into a dedicated type.
Future patches will expand this structure and then eventually move MMIO
read/write operations over to using this type.
v2:
- Fix kerneldoc of 'size' field. The rename/refocusing of this field
got moved to the next patch of the series. (Lucas)
- Correct commit message; it's the tile, not the device, mmio that's
been pulled out to a separate type. (Michal)
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240910234719.3335472-47-matthew.d.roper@intel.com
Stable-dep-of: 4a9b4e1fa5 ("drm/xe/mmio: Avoid double-adjust in 64-bit reads")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 998fde0647 ]
Forcewake is a general GT power management concept that isn't specific
to MMIO register access. Move the forcewake information for a GT out of
the 'mmio' substruct and into a 'pm' substruct. Also use the gt_to_fw()
helper in a few more places where it was being open-coded.
v2:
- Kerneldoc tweaks. (Lucas)
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240910234719.3335472-46-matthew.d.roper@intel.com
Stable-dep-of: 4a9b4e1fa5 ("drm/xe/mmio: Avoid double-adjust in 64-bit reads")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dd3411959b ]
The commit c8424e776b ("MODSIGN: Export module signature definitions")
replaced the dependency of KEXEC_SIG on SYSTEM_DATA_VERIFICATION with the
dependency on MODULE_SIG_FORMAT. This change disables KEXEC_SIG in s390
kernels built with MODULES=n if nothing else selects MODULE_SIG_FORMAT.
Furthermore, the signature verification in s390 kexec does not require
MODULE_SIG_FORMAT because it requires only the struct module_signature and,
therefore, does not depend on code in kernel/module_signature.c.
But making ARCH_SUPPORTS_KEXEC_SIG depend on SYSTEM_DATA_VERIFICATION is
also incorrect because it makes KEXEC_SIG available on s390 only if some
other arbitrary option (for instance a file system or device driver)
selects it directly or indirectly.
To properly make KEXEC_SIG available for s390 kernels built with MODULES=y
as well as MODULES=n _and_ also not depend on arbitrary options selecting
SYSTEM_DATA_VERIFICATION, set ARCH_SUPPORTS_KEXEC_SIG=y for s390 and select
SYSTEM_DATA_VERIFICATION when KEXEC_SIG=y.
Fixes: c8424e776b ("MODSIGN: Export module signature definitions")
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 888a0a802c ]
platform_get_resource_byname() can return NULL, which would cause a crash
when passed the pointer to resource_size().
Move the fiu->memory_size assignment after the error check for
devm_ioremap_resource() to prevent the potential NULL pointer dereference.
Fixes: 9838c18247 ("spi: wpcm-fiu: Add direct map support")
Signed-off-by: Felix Gu <ustc.gu@gmail.com>
Reviewed-by: J. Neuschäfer <j.ne@posteo.net>
Link: https://patch.msgid.link/20260212-wpcm-v1-1-5b7c4f526aac@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abde491143 ]
eng_id can be negative and that stream_enc_regs[]
can be indexed out of bounds.
eng_id is used directly as an index into stream_enc_regs[], which has
only 5 entries. When eng_id is 5 (ENGINE_ID_DIGF) or negative, this can
access memory past the end of the array.
Add a bounds check using ARRAY_SIZE() before using eng_id as an index.
The unsigned cast also rejects negative values.
This avoids out-of-bounds access.
Fixes the below smatch error:
dcn*_resource.c: stream_encoder_create() may index
stream_enc_regs[eng_id] out of bounds (size 5).
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn351/dcn351_resource.c
1246 static struct stream_encoder *dcn35_stream_encoder_create(
1247 enum engine_id eng_id,
1248 struct dc_context *ctx)
1249 {
...
1255
1256 /* Mapping of VPG, AFMT, DME register blocks to DIO block instance */
1257 if (eng_id <= ENGINE_ID_DIGF) {
ENGINE_ID_DIGF is 5. should <= be <?
Unrelated but, ugh, why is Smatch saying that "eng_id" can be negative?
end_id is type signed long, but there are checks in the caller which prevent it from being negative.
1258 vpg_inst = eng_id;
1259 afmt_inst = eng_id;
1260 } else
1261 return NULL;
1262
...
1281
1282 dcn35_dio_stream_encoder_construct(enc1, ctx, ctx->dc_bios,
1283 eng_id, vpg, afmt,
--> 1284 &stream_enc_regs[eng_id],
^^^^^^^^^^^^^^^^^^^^^^^ This stream_enc_regs[] array has 5 elements so we are one element beyond the end of the array.
...
1287 return &enc1->base;
1288 }
v2: use explicit bounds check as suggested by Roman/Dan; avoid unsigned int cast
v3: The compiler already knows how to compare the two values, so the
cast (int) is not needed. (Roman)
Fixes: 2728e9c7c8 ("drm/amd/display: add DC changes for DCN351")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Mario Limonciello <superm1@kernel.org>
Cc: Alex Hung <alex.hung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Cc: ChiaHsuan Chung <chiahsuan.chung@amd.com>
Cc: Roman Li <roman.li@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Roman Li <roman.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41af6215cd ]
Currently DCE doesn't support the overlay cursor, so the
dm_crtc_get_cursor_mode() function returns DM_CURSOR_NATIVE_MODE
unconditionally. The outcome is that it doesn't check for the
conditions that would necessitate the overlay cursor, meaning
that it doesn't reject cases where the native cursor mode isn't
supported on DCE.
Remove the early return from dm_crtc_get_cursor_mode() for
DCE and instead let it perform the necessary checks and
return DM_CURSOR_OVERLAY_MODE. Add a later check that rejects
when DM_CURSOR_OVERLAY_MODE would be used with DCE.
Fixes: 1b04dcca4f ("drm/amd/display: Introduce overlay cursor mode")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4600
Suggested-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a19302cab ]
The address watch clear code receives watch_id as an unsigned value
(u32), but some helper functions were using a signed int and checked
bits by shifting with watch_id.
If a very large watch_id is passed from userspace, it can be converted
to a negative value. This can cause invalid shifts and may access
memory outside the watch_points array.
drm/amdkfd: Fix watch_id bounds checking in debug address watch v2
Fix this by checking that watch_id is within MAX_WATCH_ADDRESSES before
using it. Also use BIT(watch_id) to test and clear bits safely.
This keeps the behavior unchanged for valid watch IDs and avoids
undefined behavior for invalid ones.
Fixes the below:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c:448
kfd_dbg_trap_clear_dev_address_watch() error: buffer overflow
'pdd->watch_points' 4 <= u32max user_rl='0-3,2147483648-u32max' uncapped
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c
433 int kfd_dbg_trap_clear_dev_address_watch(struct kfd_process_device *pdd,
434 uint32_t watch_id)
435 {
436 int r;
437
438 if (!kfd_dbg_owns_dev_watch_id(pdd, watch_id))
kfd_dbg_owns_dev_watch_id() doesn't check for negative values so if
watch_id is larger than INT_MAX it leads to a buffer overflow.
(Negative shifts are undefined).
439 return -EINVAL;
440
441 if (!pdd->dev->kfd->shared_resources.enable_mes) {
442 r = debug_lock_and_unmap(pdd->dev->dqm);
443 if (r)
444 return r;
445 }
446
447 amdgpu_gfx_off_ctrl(pdd->dev->adev, false);
--> 448 pdd->watch_points[watch_id] = pdd->dev->kfd2kgd->clear_address_watch(
449 pdd->dev->adev,
450 watch_id);
v2: (as per, Jonathan Kim)
- Add early watch_id >= MAX_WATCH_ADDRESSES validation in the set path to
match the clear path.
- Drop the redundant bounds check in kfd_dbg_owns_dev_watch_id().
Fixes: e0f85f4690 ("drm/amdkfd: add debug set and clear address watch points operation")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: Jonathan Kim <jonathan.kim@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Jonathan Kim <jonathan.kim@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b82fa9b0c2 ]
The aw88261_dev_reg_update() function sets the Awinic registers in a
rather nonuniform way:
- most registers get directly overwritten from the firmware blob
- but a handful of them need more delicate logic to preserve
some bits from their current value, according to a register-
specific mask
For the latter, the logic is basically
NEW = (OLD & MASK) | (VAL & ~MASK)
However, the ~MASK value is hand-computed, and in the specific case
of the SYSCTRL register, in a buggy way.
This patch restores the proper ~MASK value.
Fixes: 028a2ae256 ("ASoC: codecs: Add aw88261 amplifier driver")
Signed-off-by: Alexandre Ferrieux <alexandre.ferrieux@orange.com>
Link: https://patch.msgid.link/20260211-aw88261-fwname-v1-1-e24e833a019d@fairphone.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f16d96e12 ]
This reverts commit f514248727 ("ASoC: fsl_xcvr: fix missing lock in fsl_xcvr_mode_put()").
The original patch attempted to acquire the card->controls_rwsem lock in
fsl_xcvr_mode_put(). However, this function is called from the upper ALSA
core function snd_ctl_elem_write(), which already holds the write lock on
controls_rwsem for the whole put operation. So there is no need to simply
hold the lock for fsl_xcvr_activate_ctl() again.
Acquiring the read lock while holding the write lock in the same thread
results in a deadlock and a hung task, as reported by Alexander Stein.
Fixes: f514248727 ("ASoC: fsl_xcvr: fix missing lock in fsl_xcvr_mode_put()")
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Closes: https://lore.kernel.org/linux-sound/5056506.GXAFRqVoOG@steina-w/
Signed-off-by: Ziyi Guo <n7l8m4@u.northwestern.edu>
Link: https://patch.msgid.link/20260210185714.556385-1-n7l8m4@u.northwestern.edu
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee41e5b63c ]
When amdgpu_nbio_ras_sw_init() fails in amdgpu_ras_init(), the function
returns directly without freeing the allocated con structure, leading
to a memory leak.
Fix this by jumping to the release_con label to properly clean up the
allocated memory before returning the error code.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: fdc94d3a8c ("drm/amdgpu: Rework pcie_bif ras sw_init")
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c44d61945 ]
amdgpu_discovery_get_nps_info() internally allocates memory for ranges
using kvcalloc(), which may use vmalloc() for large allocation. Using
kfree() to release vmalloc memory will lead to a memory corruption.
Use kvfree() to safely handle both kmalloc and vmalloc allocations.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: b194d21b9b ("drm/amdgpu: Use NPS ranges from discovery table")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9be63d565 ]
In amdgpu_acpi_enumerate_xcc(), if amdgpu_acpi_dev_init() returns -ENOMEM,
the function returns directly without releasing the allocated xcc_info,
resulting in a memory leak.
Fix this by ensuring that xcc_info is properly freed in the error paths.
Compile tested only. Issue found using a prototype static analysis tool
and code review.
Fixes: 4d5275ab0b ("drm/amdgpu: Add parsing of acpi xcc objects")
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Zilin Guan <zilin@seu.edu.cn>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9058798652 ]
aa-label_match is not correctly returning the state in all cases.
The only reason this didn't cause a error is that all callers currently
ignore the return value.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202602020631.wXgZosyU-lkp@intel.com/
Fixes: a4c9efa4db ("apparmor: make label_match return a consistent value")
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 640cf2f095 ]
When aa_get_buffer() pulls from the per-cpu list it unconditionally
decrements cache->hold. If hold reaches 0 while count is still non-zero,
the unsigned decrement wraps to UINT_MAX. This keeps hold non-zero for a
very long time, so aa_put_buffer() never returns buffers to the global
list, which can starve other CPUs and force repeated kmalloc(aa_g_path_max)
allocations.
Guard the decrement so hold never underflows.
Fixes: ea9bae12d0 ("apparmor: cache buffers on percpu list if there is lock contention")
Signed-off-by: Zhengmian Hu <huzhengmian@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4c9efa4db ]
compound match is inconsistent in returning a state or an integer error
this is problemati if the error is ever used as a state in the state
machine
Fixes: f1bd904175 ("apparmor: add the base fns() for domain labels")
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b2e27be294 ]
The modes shouldn't be applied at the point of label match, it just
results in them being applied multiple times. Instead they should be
applied after which is already being done by all callers so it can
just be dropped from label_match.
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Stable-dep-of: a4c9efa4db ("apparmor: make label_match return a consistent value")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ca56813f4 ]
Posix cpu timers requires an additional step beyond setting the rlimit.
Refactor the code so its clear when what code is setting the
limit and conditionally update the posix cpu timers when appropriate.
Fixes: baa73d9e47 ("posix-timers: Make them configurable")
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 74b7105e53 ]
In policy_unpack.c:unpack_perms_table, the perms struct is allocated via
kcalloc, with the position being reset if the allocation fails. However,
the error path results in -EPROTO being retured instead of -ENOMEM. Fix
this to return the correct error code.
Reported-by: Zygmunt Krynicki <zygmunt.krynicki@canonical.com>
Fixes: fd1b2b95a2 ("apparmor: add the ability for policy to specify a permission table")
Reviewed-by: Tyler Hicks <code@tyhicks.com>
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fc367bfd4 ]
Source blob may come from userspace and might be unaligned.
Try to optize the copying process by avoiding unaligned memory accesses.
- Added Fixes tag
- Added "Fix &" to description as this doesn't just optimize but fixes
a potential unaligned memory access
Fixes: e6e8bf4188 ("apparmor: fix restricted endian type warnings for dfa unpack")
Signed-off-by: Helge Deller <deller@gmx.de>
[jj: remove duplicate word "convert" in comment trigger checkpatch warning]
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 00b6765753 ]
Deal with the potential that sock and sock-sk can be NULL during
socket setup or teardown. This could lead to an oops. The fix for NULL
pointer dereference in __unix_needs_revalidation shows this is at
least possible for af_unix sockets. While the fix for af_unix sockets
applies for newer mediation this is still the fall back path for older
af_unix mediation and other sockets, so ensure it is covered.
Fixes: 56974a6fcf ("apparmor: add base infastructure for socket mediation")
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57a94d4b22 ]
The max number of channels is always an unsigned int, use the correct
type to fix compilation errors done with strict type checking, e.g.:
error: call to ‘__compiletime_assert_1110’ declared with attribute
error: min(mlx5e_get_devlink_param_num_doorbells(mdev),
mlx5e_get_max_num_channels(mdev)) signedness error
Fixes: 74a8dadac1 ("net/mlx5e: Preparations for supporting larger number of channels")
Signed-off-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <Jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260218072904.1764634-7-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47bf2e8138 ]
Driver is using num_vhca_ports capability to distinguish between
multiport master device and multiport slave device. num_vhca_ports is a
capability the driver sets according to the MAX num_vhca_ports
capability reported by FW. On the other hand, light SFs doesn't set the
above capbility.
This leads to wrong results whenever light SFs is checking whether he is
a multiport master or slave.
Therefore, use the MAX capability to distinguish between master and
slave devices.
Fixes: e71383fb9c ("net/mlx5: Light probe local SFs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Jacob Keller <Jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20260218072904.1764634-2-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
