[ Upstream commit b174084b3f ]
[Why]
If amdgpu_dm failed to initalize before amdgpu_dm_initialize_drm_device()
completed then freeing atomic_obj will lead to list corruption.
[How]
Check if atomic_obj state is initialized before trying to free.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Ivan Lipski <ivan.lipski@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b4ba1207d4 ]
This patch fails vhost_add_used_n() early when __vhost_add_used()
fails to make sure used idx is not updated with stale used ring
information.
Reported-by: Eugenio Pérez <eperezma@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Message-Id: <20250714084755.11921-2-jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Lei Yang <leiyang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03a92f036a ]
When allocating receive buffers for the vsock virtio RX virtqueue, an
SKB is allocated with a 4140 data payload (the 44-byte packet header +
VIRTIO_VSOCK_DEFAULT_RX_BUF_SIZE). Even when factoring in the SKB
overhead, the resulting 8KiB allocation thanks to the rounding in
kmalloc_reserve() is wasteful (~3700 unusable bytes) and results in a
higher-order page allocation on systems with 4KiB pages just for the
sake of a few hundred bytes of packet data.
Limit the vsock virtio RX buffers to 4KiB per SKB, resulting in much
better memory utilisation and removing the need to allocate higher-order
pages entirely.
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Will Deacon <will@kernel.org>
Message-Id: <20250717090116.11987-5-will@kernel.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eac21f8ebe ]
Currently the TTM shrinker aborts shrinking as soon as it frees pages from
any of the page order pools and by doing so it can fail to respect the
freeing target which was configured by the shrinker core.
We use the wording "can fail" because the number of freed pages will
depend on the presence of pages in the pools and the order of the pools on
the LRU list. For example if there are no free pages in the high order
pools the shrinker core may require multiple passes over the TTM shrinker
before it will free the default target of 128 pages (assuming there are
free pages in the low order pools). This inefficiency can be compounded by
the pool LRU where multiple further calls into the TTM shrinker are
required to end up looking at the pool with pages.
Improve this by never freeing less than the shrinker core has requested.
At the same time we start reporting the number of scanned pages (freed in
this case), which prevents the core shrinker from giving up on the TTM
shrinker too soon and moving on.
v2:
* Simplify loop logic. (Christian)
* Improve commit message.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20250603112750.34997-2-tvrtko.ursulin@igalia.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bbc7bd658d ]
The ringbuf max_entries must be PAGE_ALIGNED. See kernel function
ringbuf_map_alloc(). So for arm64 64KB page size, adjust max_entries
properly.
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/r/20250607013626.1553001-1-yonghong.song@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 31557b3487 ]
A decade ago commit 6d08acd2d3 ("in6: fix conflict with glibc")
hid the definitions of IPV6 options, because GCC was complaining
about duplicates. The commit did not list the warnings seen, but
trying to recreate them now I think they are (building iproute2):
In file included from ./include/uapi/rdma/rdma_user_cm.h:39,
from rdma.h:16,
from res.h:9,
from res-ctx.c:7:
../include/uapi/linux/in6.h:171:9: warning: ‘IPV6_ADD_MEMBERSHIP’ redefined
171 | #define IPV6_ADD_MEMBERSHIP 20
| ^~~~~~~~~~~~~~~~~~~
In file included from /usr/include/netinet/in.h:37,
from rdma.h:13:
/usr/include/bits/in.h:233:10: note: this is the location of the previous definition
233 | # define IPV6_ADD_MEMBERSHIP IPV6_JOIN_GROUP
| ^~~~~~~~~~~~~~~~~~~
../include/uapi/linux/in6.h:172:9: warning: ‘IPV6_DROP_MEMBERSHIP’ redefined
172 | #define IPV6_DROP_MEMBERSHIP 21
| ^~~~~~~~~~~~~~~~~~~~
/usr/include/bits/in.h:234:10: note: this is the location of the previous definition
234 | # define IPV6_DROP_MEMBERSHIP IPV6_LEAVE_GROUP
| ^~~~~~~~~~~~~~~~~~~~
Compilers don't complain about redefinition if the defines
are identical, but here we have the kernel using the literal
value, and glibc using an indirection (defining to a name
of another define, with the same numerical value).
Problem is, the commit in question hid all the IPV6 socket
options, and glibc has a pretty sparse list. For instance
it lacks Flow Label related options. Willem called this out
in commit 3fb321fde2 ("selftests/net: ipv6 flowlabel"):
/* uapi/glibc weirdness may leave this undefined */
#ifndef IPV6_FLOWINFO
#define IPV6_FLOWINFO 11
#endif
More interestingly some applications (socat) use
a #ifdef IPV6_FLOWINFO to gate compilation of thier
rudimentary flow label support. (For added confusion
socat misspells it as IPV4_FLOWINFO in some places.)
Hide only the two defines we know glibc has a problem
with. If we discover more warnings we can hide more
but we should avoid covering the entire block of
defines for "IPV6 socket options".
Link: https://patch.msgid.link/20250609143933.1654417-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4e16a9a002 ]
For the evict fail case, the evict error should be returned.
v2: Consider ENOENT case.
v3: Abort directly when the eviction failed for some reason (except for -ENOENT)
and not wait for the move to finish
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://lore.kernel.org/r/20250603091154.3472646-1-Emily.Deng@amd.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e16170ae9 ]
In NC-SI spec v1.2 section 8.4.44.2, the firmware name doesn't
need to be null terminated while its size occupies the full size
of the field. Fix the buffer overflow issue by adding one
additional byte for null terminator.
Signed-off-by: Hari Kalavakunta <kalavakunta.hari.prasad@gmail.com>
Reviewed-by: Paul Fertser <fercerpav@gmail.com>
Link: https://patch.msgid.link/20250610193338.1368-1-kalavakunta.hari.prasad@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9080abea1 ]
Since the kern_dbpage gets set up in ionic_lif_init() and that
function's error path will clean it if needed, the kern_dbpage
on teardown should be cleaned in ionic_lif_deinit(), not in
ionic_lif_free(). As it is currently we get a double call
to iounmap() on kern_dbpage if the PCI ionic fails setting up
the lif. One example of this is when firmware isn't responding
to AdminQ requests and ionic's first AdminQ call fails to
setup the NotifyQ.
Signed-off-by: Shannon Nelson <shannon.nelson@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Joe Damato <joe@dama.to>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76b3e5078d ]
When `dma_mapping_error()` is true, if a new `skb` has been allocated,
then it must be de-allocated.
Compile tested only
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250613074014.69856-2-fourier.thomas@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e9a7795e75 ]
Replace pr_err() with pr_err_ratelimited() in ptp_clock_settime() to
prevent log flooding when the physical clock is free running, which
happens on some of my hosts. This ensures error messages are
rate-limited and improves kernel log readability.
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250613-ptp-v1-1-ee44260ce9e2@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37883bbc45 ]
BCM5325 doesn't implement GMII_PORT_OVERRIDE_CTRL register so we should
avoid reading or writing it.
PORT_OVERRIDE_RX_FLOW and PORT_OVERRIDE_TX_FLOW aren't defined on BCM5325
and we should use PORT_OVERRIDE_LP_FLOW_25 instead.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-12-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c00df10187 ]
CPU port should be B53_CPU_PORT instead of B53_CPU_PORT_25 for
B53_PVLAN_PORT_MASK register.
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Link: https://patch.msgid.link/20250614080000.1884236-14-noltari@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b11344f63f ]
In gve_adminq_issue_cmd(), return -EINVAL instead of 0 when an unknown
admin queue command opcode is encountered.
This prevents the function from silently succeeding on invalid input
and prevents undefined behavior by ensuring the function fails gracefully
when an unrecognized opcode is provided.
These changes improve error handling.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://patch.msgid.link/20250616054504.1644770-2-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60a8b1a5d0 ]
When CONFIG_VLAN_8021Q=n, a set of stub helpers are used, three of these
helpers use BUG() unconditionally.
This code should not be reached, as callers of these functions should
always check for is_vlan_dev() first, but the usage of BUG() is not
recommended, replace it with WARN_ON() instead.
Reviewed-by: Alex Lazar <alazar@nvidia.com>
Reviewed-by: Dragos Tatulea <dtatulea@nvidia.com>
Signed-off-by: Gal Pressman <gal@nvidia.com>
Link: https://patch.msgid.link/20250616132626.1749331-3-gal@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d1ec1e955 ]
Several other ASICs allow printing OD SCLK levels without setting DPM
control to manual. When OD is disabled it will show the range the
hardware supports. When OD is enabled it will show what values have
been programmed. Adjust VanGogh to work the same.
Cc: Pierre-Loup A. Griffais <pgriffais@valvesoftware.com>
Reported-by: Vicki Pfau <vi@endrift.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://lore.kernel.org/r/20250609031227.479079-1-superm1@kernel.org
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8155c1df5 ]
This effectively reverts 6e8b0ff1ba ("dpaa_eth: Add change_carrier()
for Fixed PHYs"). Usage of fixed_phy_change_carrier() requires that
fixed_phy_register() has been called before, directly or indirectly.
And that's not the case in this driver.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/7eb189b3-d5fd-4be6-8517-a66671a4e4e3@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7d78566bb ]
As discussesd before in [0] proxy entries (which are more configuration
than runtime data) should stay when the link (carrier) goes does down.
This is what happens for regular neighbour entries.
So lets fix this by:
- storing in proxy entries the fact that it was added as NUD_PERMANENT
- not removing NUD_PERMANENT proxy entries when the carrier goes down
(same as how it's done in neigh_flush_dev() for regular neigh entries)
[0]: https://lore.kernel.org/netdev/c584ef7e-6897-01f3-5b80-12b53f7b4bf4@kernel.org/
Signed-off-by: Nicolas Escande <nico.escande@gmail.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com>
Link: https://patch.msgid.link/20250617141334.3724863-1-nico.escande@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0de19d5ae0 ]
Limit rate_idx to IL_LAST_OFDM_RATE for 5GHz band for thinkable case
the index is incorrect.
Reported-by: Fedor Pchelkin <pchelkin@ispras.ru>
Reported-by: Alexei Safin <a.safin@rosa.ru>
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl>
Reviewed-by: Fedor Pchelkin <pchelkin@ispras.ru>
Link: https://patch.msgid.link/20250525144524.GA172583@wp.pl
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4672aec56d ]
skb_frag_address_safe() needs a check that the
skb_frag_page exists check similar to skb_frag_address().
Cc: ap420073@gmail.com
Signed-off-by: Mina Almasry <almasrymina@google.com>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250619175239.3039329-1-almasrymina@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf183c1730 ]
The DMA map functions can fail and should be tested for errors.
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250620075602.12575-1-fourier.thomas@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44c0e19100 ]
The function `_rtl_pci_init_one_rxdesc()` can fail even when the new
`skb` is passed because of a DMA mapping error. If it fails, the `skb`
is not saved in the rx ringbuffer and thus lost.
Compile tested only
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20250616105631.444309-4-fourier.thomas@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 140c6a61d8 ]
Currently, when a non-DFS channel is brought up and the bandwidth is
expanded from 80 MHz to 160 MHz, where the primary 80 MHz is non-DFS
and the secondary 80 MHz consists of DFS channels, radar detection
fails if radar occurs in the secondary 80 MHz.
When the channel is switched from 80 MHz to 160 MHz, with the primary
80 MHz being non-DFS and the secondary 80 MHz consisting of DFS
channels, the radar required flag in the channel switch parameters
is set to true. However, when using a reserved channel context,
it is not updated in sdata, which disables radar detection in the
secondary 80 MHz DFS channels.
Update the radar required flag in sdata to fix this issue when using
a reserved channel context.
Signed-off-by: Ramya Gnanasekar <ramya.gnanasekar@oss.qualcomm.com>
Signed-off-by: Ramasamy Kaliappan <ramasamy.kaliappan@oss.qualcomm.com>
Link: https://patch.msgid.link/20250608140324.1687117-1-ramasamy.kaliappan@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01f60348d8 ]
[why]
DCN35 is having “DC: failed to blank crtc!” when running HPO
test cases. It's caused by not having sufficient udelay time.
[how]
Replace the old wait_for_blank_complete function with fsleep function to
sleep just until the next frame should come up. This way it doesn't poll
in case the pixel clock or other clock was bugged or until vactive and
the vblank are hit again.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Wen Chen <Wen.Chen3@amd.com>
Signed-off-by: Fangzhi Zuo <jerry.zuo@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3ad987e9d ]
The 'index' variable in the rs_fill_link_cmd() function can reach
LINK_QUAL_MAX_RETRY_NUM during the execution of the inner loop. This
variable is used as an index for the lq_cmd->rs_table array, which has a
size of LINK_QUAL_MAX_RETRY_NUM, without proper validation.
Modify the condition of the inner loop to ensure that the 'index' variable
does not exceed LINK_QUAL_MAX_RETRY_NUM - 1, thereby preventing any
potential overflow issues.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Rand Deeb <rand.sec96@gmail.com>
Link: https://patch.msgid.link/20240313101755.269209-1-rand.sec96@gmail.com
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 660a467a5e ]
[Why/How]
Separate the checks for set_gsl and set_gsl_source_select, since
source_select may not be implemented/necessary.
Reviewed-by: Nevenko Stupar <nevenko.stupar@amd.com>
Signed-off-by: Ilya Bakoulin <Ilya.Bakoulin@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7ad21258f ]
In the current implementation, IP coalescing is always enabled and
cannot be disabled.
As setting maximum frames to 0 or 1, or setting delay to zero implies
immediate delivery of single packets/IRQs, disable coalescing in
hardware in these cases.
This also guarantees that coalescing is never enabled with ICFT or ICTT
set to zero, a configuration that could lead to unpredictable behaviour
according to i.MX8MP reference manual.
Signed-off-by: Jonas Rebmann <jre@pengutronix.de>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20250626-fec_deactivate_coalescing-v2-1-0b217f2e80da@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fad9cf2165 ]
Aquantia AQC113(C) using ATL2FW doesn't properly prepare the NIC for
enabling wake-on-lan. The FW operation `set_power` was only implemented
for `hw_atl` and not `hw_atl2`. Implement the `set_power` functionality
for `hw_atl2`.
Tested with both AQC113 and AQC113C devices. Confirmed you can shutdown
the system and wake from S5 using magic packets. NIC was previously
powered off when entering S5. If the NIC was configured for WOL by the
Windows driver, loading the atlantic driver would disable WOL.
Partially cherry-picks changes from commit,
37bd5cc
Attributing original authors from Marvell for the referenced commit.
Closes: https://github.com/Aquantia/AQtion/issues/70
Co-developed-by: Igor Russkikh <irusskikh@marvell.com>
Co-developed-by: Mark Starovoitov <mstarovoitov@marvell.com>
Co-developed-by: Dmitry Bogdanov <dbogdanov@marvell.com>
Co-developed-by: Pavel Belous <pbelous@marvell.com>
Co-developed-by: Nikita Danilov <ndanilov@marvell.com>
Signed-off-by: Eric Work <work.eric@gmail.com>
Reviewed-by: Igor Russkikh <irusskikh@marvell.com>
Link: https://patch.msgid.link/20250629051535.5172-1-work.eric@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ec31cb17c ]
According to the description of tb_xdomain_enable_paths(), the third
parameter represents the transmit ring and the fifth parameter represents
the receive ring. tb_xdomain_disable_paths() is the same case.
[Jakub] Mika says: it works now because both rings ->hop is the same
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/20250625051149.GD2824380@black.fi.intel.com
Signed-off-by: zhangjianrong <zhangjianrong5@huawei.com>
Link: https://patch.msgid.link/20250628094920.656658-1-zhangjianrong5@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8065af334 ]
According to USB4 specification, if E2E flow control is disabled for
the Transmit Descriptor Ring, the Host Interface Adapter Layer shall
not require any credits to be available before transmitting a Tunneled
Packet from this Transmit Descriptor Ring, so e2e flow control should
be enabled in both directions.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Link: https://lore.kernel.org/20250624153805.GC2824380@black.fi.intel.com
Signed-off-by: zhangjianrong <zhangjianrong5@huawei.com>
Link: https://patch.msgid.link/20250628093813.647005-1-zhangjianrong5@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e8ebfe677 ]
Since f916dd32a9 ("arm64/fpsimd: ptrace: Mandate SVE payload for
streaming-mode state") we reject attempts to write to the streaming mode
regset even if there is no register data supplied, causing the tests for
setting vector lengths and setting SVE_VL_INHERIT in sve-ptrace to
spuriously fail. Set the flag to avoid the issue, we still support not
supplying register data.
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250609-kselftest-arm64-ssve-fixups-v2-3-998fcfa6f240@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a3b871a0f7 ]
Disable deep power saving for USB and SDIO because rtw89_mac_send_rpwm()
is called in atomic context and accessing hardware registers results in
"scheduling while atomic" errors.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/0f49eceb-0de0-47e2-ba36-3c6a0dddd17d@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e2b7160333 ]
Clear some bits in some registers in order to allow RTL8851BU to power
on. This is done both when powering on and when powering off because
that's what the vendor driver does.
Also tested with RTL8832BU and RTL8832CU.
Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com>
Acked-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/a39da939-d640-4486-ad38-f658f220afc8@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0a1ff88ec5 ]
This resolves a potential deadlock vs msm_gem_vm_close(). Otherwise for
_NO_SHARE buffers msm_gem_describe() could be trying to acquire the
shared vm resv, while already holding priv->obj_lock. But _vm_close()
might drop the last reference to a GEM obj while already holding the vm
resv, and msm_gem_free_object() needs to grab priv->obj_lock, a locking
inversion.
OTOH this is only for debugfs and it isn't critical if we undercount by
skipping a locked obj. So just use trylock() and move along if we can't
get the lock.
Signed-off-by: Rob Clark <robdclark@chromium.org>
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
Tested-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Antonino Maniscalco <antomani103@gmail.com>
Patchwork: https://patchwork.freedesktop.org/patch/661525/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dbd40f318c ]
Since commit 63ed8de4be ("mld: add mc_lock for protecting
per-interface mld data"), every multicast resource is protected
by inet6_dev->mc_lock.
RTNL is unnecessary in terms of protection but still needed for
synchronisation between addrconf_ifdown() and __ipv6_dev_mc_inc().
Once we removed RTNL, there would be a race below, where we could
add a multicast address to a dead inet6_dev.
CPU1 CPU2
==== ====
addrconf_ifdown() __ipv6_dev_mc_inc()
if (idev->dead) <-- false
dead = true return -ENODEV;
ipv6_mc_destroy_dev() / ipv6_mc_down()
mutex_lock(&idev->mc_lock)
...
mutex_unlock(&idev->mc_lock)
mutex_lock(&idev->mc_lock)
...
mutex_unlock(&idev->mc_lock)
The race window can be easily closed by checking inet6_dev->dead
under inet6_dev->mc_lock in __ipv6_dev_mc_inc() as addrconf_ifdown()
will acquire it after marking inet6_dev dead.
Let's check inet6_dev->dead under mc_lock in __ipv6_dev_mc_inc().
Note that now __ipv6_dev_mc_inc() no longer depends on RTNL and
we can remove ASSERT_RTNL() there and the RTNL comment above
addrconf_join_solict().
Signed-off-by: Kuniyuki Iwashima <kuniyu@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20250702230210.3115355-4-kuni1840@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 760b9b4f6d ]
If the device configuration fails (if `dma_dev->device_config()`),
`sg_dma_address(&sg)` is not initialized and the jump to `err_dma_prep`
leads to calling `dma_unmap_single()` on `sg_dma_address(&sg)`.
Signed-off-by: Thomas Fourier <fourier.thomas@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20250610142918.169540-2-fourier.thomas@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6b04716cdc ]
When SAE commit is sent and received in response, there's no
ordering for the SAE confirm messages. As such, don't call
drivers to stop listening on the channel when the confirm
message is still expected.
This fixes an issue if the local confirm is transmitted later
than the AP's confirm, for iwlwifi (and possibly mt76) the
AP's confirm would then get lost since the device isn't on
the channel at the time the AP transmit the confirm.
For iwlwifi at least, this also improves the overall timing
of the authentication handshake (by about 15ms according to
the report), likely since the session protection won't be
aborted and rescheduled.
Note that even before this, mgd_complete_tx() wasn't always
called for each call to mgd_prepare_tx() (e.g. in the case
of WEP key shared authentication), and the current drivers
that have the complete callback don't seem to mind. Document
this as well though.
Reported-by: Jan Hendrik Farr <kernel@jfarr.cc>
Closes: https://lore.kernel.org/all/aB30Ea2kRG24LINR@archlinux/
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250609213232.12691580e140.I3f1d3127acabcd58348a110ab11044213cf147d3@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 155213a2ae ]
schbench (https://github.com/masoncl/schbench.git) is showing a
regression from previous production kernels that bisected down to:
sched/fair: Remove sysctl_sched_migration_cost condition (c5b0a7eefc)
The schbench command line was:
schbench -L -m 4 -M auto -t 256 -n 0 -r 0 -s 0
This creates 4 message threads pinned to CPUs 0-3, and 256x4 worker
threads spread across the rest of the CPUs. Neither the worker threads
or the message threads do any work, they just wake each other up and go
back to sleep as soon as possible.
The end result is the first 4 CPUs are pegged waking up those 1024
workers, and the rest of the CPUs are constantly banging in and out of
idle. If I take a v6.9 Linus kernel and revert that one commit,
performance goes from 3.4M RPS to 5.4M RPS.
schedstat shows there are ~100x more new idle balance operations, and
profiling shows the worker threads are spending ~20% of their CPU time
on new idle balance. schedstats also shows that almost all of these new
idle balance attemps are failing to find busy groups.
The fix used here is to crank up the cost of the newidle balance whenever it
fails. Since we don't want sd->max_newidle_lb_cost to grow out of
control, this also changes update_newidle_cost() to use
sysctl_sched_migration_cost as the upper limit on max_newidle_lb_cost.
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20250626144017.1510594-2-clm@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b367017cda ]
When an stp sync check is handled on a system with multiple
cpus each cpu gets a machine check but only the first one
actually handles the sync operation. All other CPUs spin
waiting for the first one to finish with a short udelay().
But udelay can't be used here as the first CPU modifies tod_clock_base
before performing the sync op. During this timeframe
get_tod_clock_monotonic() might return a non-monotonic time.
The time spent waiting should be very short and udelay is a busy loop
anyways, therefore simply remove the udelay.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9e2f2246e ]
The thread flags may change during their processing.
For example a task_work can queue a new signal to be sent.
This signal should be delivered before returning to usespace again.
Evaluate the flags repeatedly similar to other architectures.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Nam Cao <namcao@linutronix.de>
Link: https://patch.msgid.link/20250704-uml-thread_flags-v1-1-0e293fd8d627@linutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53d20606c4 ]
The buffer bgx_sel used in snprintf() was too small to safely hold
the formatted string "BGX%d" for all valid bgx_id values. This caused
a -Wformat-truncation warning with `Werror` enabled during build.
Increase the buffer size from 5 to 7 and use `sizeof(bgx_sel)` in
snprintf() to ensure safety and suppress the warning.
Build warning:
CC drivers/net/ethernet/cavium/thunder/thunder_bgx.o
drivers/net/ethernet/cavium/thunder/thunder_bgx.c: In function
‘bgx_acpi_match_id’:
drivers/net/ethernet/cavium/thunder/thunder_bgx.c:1434:27: error: ‘%d’
directive output may be truncated writing between 1 and 3 bytes into a
region of size 2 [-Werror=format-truncation=]
snprintf(bgx_sel, 5, "BGX%d", bgx->bgx_id);
^~
drivers/net/ethernet/cavium/thunder/thunder_bgx.c:1434:23: note:
directive argument in the range [0, 255]
snprintf(bgx_sel, 5, "BGX%d", bgx->bgx_id);
^~~~~~~
drivers/net/ethernet/cavium/thunder/thunder_bgx.c:1434:2: note:
‘snprintf’ output between 5 and 7 bytes into a destination of size 5
snprintf(bgx_sel, 5, "BGX%d", bgx->bgx_id);
compiler warning due to insufficient snprintf buffer size.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250711140532.2463602-1-alok.a.tiwari@oracle.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e30ecf23b ]
Currently, __mkroute_output overrules the MTU value configured for
broadcast routes.
This buggy behaviour can be reproduced with:
ip link set dev eth1 mtu 9000
ip route del broadcast 192.168.0.255 dev eth1 proto kernel scope link src 192.168.0.2
ip route add broadcast 192.168.0.255 dev eth1 proto kernel scope link src 192.168.0.2 mtu 1500
The maximum packet size should be 1500, but it is actually 8000:
ping -b 192.168.0.255 -s 8000
Fix __mkroute_output to allow MTU values to be configured for
for broadcast routes (to support a mixed-MTU local-area-network).
Signed-off-by: Oscar Maes <oscmaes92@gmail.com>
Link: https://patch.msgid.link/20250710142714.12986-1-oscmaes92@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3954502377 ]
Disallow bind() calls that have the same arguments as existing bound
sockets. Previously multiple sockets could bind() to the same
type/local address, with an arbitrary socket receiving matched messages.
This is only a partial fix, a future commit will define precedence order
for MCTP_ADDR_ANY versus specific EID bind(), which are allowed to exist
together.
Signed-off-by: Matt Johnston <matt@codeconstruct.com.au>
Link: https://patch.msgid.link/20250710-mctp-bind-v4-2-8ec2f6460c56@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 90c09d57ca ]
On kernels built with CONFIG_IRQ_WORK=y, when rcu_read_unlock() is
invoked within an interrupts-disabled region of code [1], it will invoke
rcu_read_unlock_special(), which uses an irq-work handler to force the
system to notice when the RCU read-side critical section actually ends.
That end won't happen until interrupts are enabled at the soonest.
In some kernels, such as those booted with rcutree.use_softirq=y, the
irq-work handler is used unconditionally.
The per-CPU rcu_data structure's ->defer_qs_iw_pending field is
updated by the irq-work handler and is both read and updated by
rcu_read_unlock_special(). This resulted in the following KCSAN splat:
------------------------------------------------------------------------
BUG: KCSAN: data-race in rcu_preempt_deferred_qs_handler / rcu_read_unlock_special
read to 0xffff96b95f42d8d8 of 1 bytes by task 90 on cpu 8:
rcu_read_unlock_special+0x175/0x260
__rcu_read_unlock+0x92/0xa0
rt_spin_unlock+0x9b/0xc0
__local_bh_enable+0x10d/0x170
__local_bh_enable_ip+0xfb/0x150
rcu_do_batch+0x595/0xc40
rcu_cpu_kthread+0x4e9/0x830
smpboot_thread_fn+0x24d/0x3b0
kthread+0x3bd/0x410
ret_from_fork+0x35/0x40
ret_from_fork_asm+0x1a/0x30
write to 0xffff96b95f42d8d8 of 1 bytes by task 88 on cpu 8:
rcu_preempt_deferred_qs_handler+0x1e/0x30
irq_work_single+0xaf/0x160
run_irq_workd+0x91/0xc0
smpboot_thread_fn+0x24d/0x3b0
kthread+0x3bd/0x410
ret_from_fork+0x35/0x40
ret_from_fork_asm+0x1a/0x30
no locks held by irq_work/8/88.
irq event stamp: 200272
hardirqs last enabled at (200272): [<ffffffffb0f56121>] finish_task_switch+0x131/0x320
hardirqs last disabled at (200271): [<ffffffffb25c7859>] __schedule+0x129/0xd70
softirqs last enabled at (0): [<ffffffffb0ee093f>] copy_process+0x4df/0x1cc0
softirqs last disabled at (0): [<0000000000000000>] 0x0
------------------------------------------------------------------------
The problem is that irq-work handlers run with interrupts enabled, which
means that rcu_preempt_deferred_qs_handler() could be interrupted,
and that interrupt handler might contain an RCU read-side critical
section, which might invoke rcu_read_unlock_special(). In the strict
KCSAN mode of operation used by RCU, this constitutes a data race on
the ->defer_qs_iw_pending field.
This commit therefore disables interrupts across the portion of the
rcu_preempt_deferred_qs_handler() that updates the ->defer_qs_iw_pending
field. This suffices because this handler is not a fast path.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay (AMD) <neeraj.upadhyay@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
