Adds lwmi_is_attr_01_supported, and only creates the attribute subfolder
if the attribute is supported by the hardware. Due to some poorly
implemented BIOS this is a multi-step sequence of events. This is
because:
- Some BIOS support getting the capability data from custom mode (0xff),
while others only support it in no-mode (0x00).
- Some BIOS support get/set for the current value from custom mode (0xff),
while others only support it in no-mode (0x00).
- Some BIOS report capability data for a method that is not fully
implemented.
- Some BIOS have methods fully implemented, but no complimentary
capability data.
To ensure we only expose fully implemented methods with corresponding
capability data, we check each outcome before reporting that an
attribute can be supported.
Checking for lwmi_is_attr_01_supported during remove is not done to
ensure that we don't attempt to call cd01 or send WMI events if one of
the interfaces being removed was the cause of the driver unloading.
Fixes: edc4b183b7 ("platform/x86: Add Lenovo Other Mode WMI Driver")
Reported-by: Kurt Borja <kuurtb@gmail.com>
Closes: https://lore.kernel.org/platform-driver-x86/DG60P3SHXR8H.3NSEHMZ6J7XRC@gmail.com/
Cc: stable@vger.kernel.org
Reviewed-by: Rong Zhang <i@rong.moe>
Tested-by: Rong Zhang <i@rong.moe>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-10-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Adds lwmi_attr_id() function. In the same vein as LWMI_ATTR_ID_FAN_RPM(),
but as a generic, to de-duplicate attribute_id assignment boilerplate.
Adds tunable_attr_01_id() function that breaks out the members of a
tunable_attr_01 struct and passes them to lwmi_attr_id().
No functional change intended.
Cc: stable@vger.kernel.org
Reviewed-by: Rong Zhang <i@rong.moe>
Tested-by: Rong Zhang <i@rong.moe>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-9-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In a later patch in the series the thermal mode enum will be accessed
across three separate drivers (wmi-capdata, wmi-gamezonem and wmi-other).
An additional patch in the series will also add a function prototype that
needs to reference this enum in wmi-helpers.h. To avoid having all these
drivers begin to import each others headers, and to avoid declaring an
opaque enum to hande the second case, move the thermal mode enum to
helpers where it can be safely accessed by everything that needs it from
a single import.
While at it, since the gamezone_events_type enum is the only remaining
item in the header, move that as well and remove the gamezone header
entirely.
Cc: stable@vger.kernel.org
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Rong Zhang <i@rong.moe>
Tested-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-8-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently, lenovo-wmi-gamezone depends on lenovo-wmi-other as the former
imports symbols from the latter. The imported symbols are just used to
register a notifier block. However, there is no runtime dependency
between both drivers, and either of them can run without the other,
which is the major purpose of using the notifier framework.
Such a link-time dependency is non-optimal. A previous attempt to "fix"
it made LENOVO_WMI_GAMEZONE select LENOVO_WMI_TUNING, which was
fundamentally broken and resulted in undefined Kconfig behavior, as
`select' cannot be used on a symbol with potentially unmet dependencies.
Decouple both drivers by moving the thermal mode notifier chain to
lenovo-wmi-helpers. Methods for notifier block (un)registration are
exported for lenovo-wmi-gamezone, while a method for querying the
current thermal mode are exported for lenovo-wmi-other.
This turns the dependency graph from
+------------ lenovo-wmi-gamezone
| |
v |
lenovo-wmi-helpers |
^ |
| V
+------------ lenovo-wmi-other
into
+------------ lenovo-wmi-gamezone
|
v
lenovo-wmi-helpers
^
|
+------------ lenovo-wmi-other
To make it clear, the name of the notifier chain is also renamed from
`om_chain_head' to `tm_chain_head', indicating that it's used to query
the current thermal mode.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Fixes: 6e38b9fcbf ("platform/x86: lenovo: gamezone needs "other mode"")
Cc: stable@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202603252259.gHvJDyh3-lkp@intel.com/
Closes: https://lore.kernel.org/oe-kbuild-all/202603260302.X0NjQOda-lkp@intel.com/
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-7-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
In struct tunable_attr_01 the capdata pointer is unused and the size of
the id members is u32 when it should be u8. Fix these prior to adding
additional members.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Cc: stable@vger.kernel.org
Reviewed-by: Rong Zhang <i@rong.moe>
Tested-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-6-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Adds explicit initialization of wmi_method_args_32 declarations with
zero values to prevent uninitialized data from being sent to the device
BIOS when passed.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Fixes: 22024ac536 ("platform/x86: Add Lenovo Gamezone WMI Driver")
Fixes: edc4b183b7 ("platform/x86: Add Lenovo Other Mode WMI Driver")
Reported-by: Rong Zhang <i@rong.moe>
Closes: https://lore.kernel.org/platform-driver-x86/95c7e7b539dd0af41189c754fcd35cec5b6fe182.camel@rong.moe/
Cc: stable@vger.kernel.org
Reviewed-by: Rong Zhang <i@rong.moe>
Tested-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-5-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
When lwmi_om_master_bind() fails, the master device's components are
left bound, with the aggregate device destroyed due to the failure
(found by sashiko.dev [1]).
Balance calls to component_bind_all() and component_unbind_all() when an
error is propagated to the component framework.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fixes: edc4b183b7 ("platform/x86: Add Lenovo Other Mode WMI Driver")
Cc: stable@vger.kernel.org
Link: https://sashiko.dev/#/patchset/20260331181208.421552-1-derekjohn.clark%40gmail.com [1]
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-4-derekjohn.clark@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Currently, the IDA id is only freed on wmi-other device removal or
failure to create firmware-attributes device, kset, or attributes. It
leaks IDA ids if the wmi-other device is bound multiple times, as the
unbind callback never frees the previously allocated IDA id.
Additionally, if the wmi-other device has failed to create a
firmware-attributes device before it gets removed, the wmi-device
removal callback double frees the same IDA id.
These bugs were found by sashiko.dev [1].
Fix them by moving ida_free() into lwmi_om_fw_attr_remove() so it is
balanced with ida_alloc() in lwmi_om_fw_attr_add(). With them fixed,
properly set and utilize the validity of priv->ida_id to balance
firmware-attributes registration and removal, without relying on
propagating the registration error to the component framework, which is
more reliable and aligns with the hwmon device registration and removal
sequences.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Fixes: edc4b183b7 ("platform/x86: Add Lenovo Other Mode WMI Driver")
Cc: stable@vger.kernel.org
Link: https://sashiko.dev/#/patchset/20260331181208.421552-1-derekjohn.clark%40gmail.com [1]
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-3-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
lwmi_dev_evaluate_int() leaks output.pointer when retval == NULL (found
by sashiko.dev [1]).
Fix it by moving `ret_obj = output.pointer' outside of the `if (retval)'
block so that it is always freed by the __free cleanup callback.
No functional change intended.
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Fixes: e521d16e76 ("platform/x86: Add lenovo-wmi-helpers")
Cc: stable@vger.kernel.org
Link: https://sashiko.dev/#/patchset/20260331181208.421552-1-derekjohn.clark%40gmail.com [1]
Signed-off-by: Rong Zhang <i@rong.moe>
Signed-off-by: Derek J. Clark <derekjohn.clark@gmail.com>
Link: https://patch.msgid.link/20260510042546.436874-2-derekjohn.clark@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Fix spelling mistake in comment:
- occured -> occurred
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Md Shofiqul Islam <shofiqtest@gmail.com>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
The xfs logging macros include a newline, remove the \n, which adds an
extra one.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Andrey Albershteyn <aalbersh@kernel.org>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Commit 4346ba1604 ("fprobe: Rewrite fprobe on function-graph tracer")
changed fprobe to register struct fprobe to an rcu-hlist, but it forgot
to wait for RCU GP. Thus there can be use-after-free if the fprobe is
released right after unregistering. This can be happened on fprobe
event and sample module code.
To fix this issue, add synchronize_rcu() in unregister_fprobe().
Note that BPF is OK because fprobe is used as a part of
bpf_kprobe_multi_link. This unregisters its fprobe in
bpf_kprobe_multi_link_release() and it is deallocated via
bpf_kprobe_multi_link_dealloc(), which is invoked from
bpf_link_defer_dealloc_rcu_gp() RCU callback.
For BPF, this also introduced unregister_fprobe_async() which does
NOT wait for RCU grace priod.
Link: https://lore.kernel.org/all/177813998919.256460.2809243930741138224.stgit@mhiramat.tok.corp.google.com/
Fixes: 4346ba1604 ("fprobe: Rewrite fprobe on function-graph tracer")
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
scx_alloc_and_add_sched() can fail after @sch has been assigned to
ops->priv. In those cases @sch is torn down (either via kfree() through
the err_free_* chain or via kobject_put() -> scx_kobj_release() -> RCU
work), but @ops->priv is left pointing at the about-to-be-freed pointer.
With the recent -EBUSY gate in scx_root_enable_workfn() and
scx_sub_enable_workfn() that rejects an attach when @ops->priv is still
non-NULL, see commit bbf30b383c ("sched_ext: Fix ops->priv clobber on
concurrent attach/detach"), a dangling @ops->priv permanently locks the
kdata out: every future attach attempt sees a stale binding and returns
-EBUSY even though no scheduler is actually attached.
Clear @ops->priv on the post-assign failure paths so that the kdata
returns to its pre-attach state when the function returns ERR_PTR().
Fixes: bbf30b383c ("sched_ext: Fix ops->priv clobber on concurrent attach/detach")
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
The batch holds references to the folios (see `filemap_get_folios`,
`folio_batch_release`), so we need to `folio_put` the folios we remove.
Tested on v6.18.
Cc: stable@vger.kernel.org
Link: https://tracker.ceph.com/issues/74156
Signed-off-by: Hristo Venev <hristo@venev.name>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When MDS rejects a session, remove_session_caps() ->
__ceph_remove_cap() -> ceph_change_snap_realm() clears
i_snap_realm for every inode that loses its last cap.
The realm is restored once caps are re-granted after
reconnect. It is not a real error and this patch changes
pr_err_ratelimited_client() on doutc().
Every quota methods ceph_quota_is_max_files_exceeded(),
ceph_quota_is_max_bytes_exceeded(),
ceph_quota_is_max_bytes_approaching() calls
ceph_has_realms_with_quotas() check. This patch adds
the missing ceph_has_realms_with_quotas() call into
ceph_quota_update_statfs().
[ idryomov: add braces around both arms of multiline ifs ]
Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In __ceph_x_decrypt(), a part of the buffer p is interpreted as a
ceph_x_encrypt_header, and the magic field of this struct is accessed.
This happens without any guarantee that the buffer is large enough to
hold this struct. The function parameter ciphertext_len represents the
length of the ciphertext to decrypt and is guaranteed to be at most the
remaining size of the allocated buffer p. However, this value is not
necessarily greater than sizeof(ceph_x_encrypt_header). E.g., a message
frame of type FRAME_TAG_AUTH_REPLY_MORE, that is just as long to hold
the ciphertext at its end with a ciphertext_len of 8 or less, can
trigger an out-of-bounds memory access when accessing hdr->magic.
This patch fixes the issue by adding a check to ensure that the
decrypted plaintext in the buffer is large enough to represent at least
the ceph_x_encrypt_header.
Cc: stable@vger.kernel.org
Signed-off-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The old_blob in __ceph_setxattr() can store
ci->i_xattrs.prealloc_blob value during the retry.
However, it is never called the ceph_buffer_put()
for the old_blob object. This patch fixes the issue of
the buffer leak.
Cc: stable@vger.kernel.org
Signed-off-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
In crush_decode_uniform_bucket(), the item_weight field of the bucket
is set. This is a single field of type u32 since the uniform bucket uses
the same weight for all items. The value in ceph_decode_need() is set to
(1+b->h.size) * sizeof(u32), which is higher than actually needed.
This patch removes the call to ceph_decode_need() with the unnecessarily
high value and switches the subsequent operation from ceph_decode_32()
to ceph_decode_32_safe(), which already includes the correct bounds
check.
Signed-off-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
A message of type CEPH_MSG_OSD_MAP containing a crush map with at least
one bucket has two fields holding the bucket algorithm. If the values
in these two fields differ, an out-of-bounds access can occur. This is
the case because the first algorithm field (alg) is used to allocate
the correct amount of memory for a bucket of this type, while the second
algorithm field inside the bucket (b->alg) is used in the subsequent
processing.
This patch fixes the issue by adding a check that compares alg and
b->alg and aborts the processing in case they differ. Furthermore,
b->alg is set to 0 in this case, because the destruction of the crush
map also uses this field to determine the bucket type, which can again
result in an out-of-bounds access when trying to free the memory pointed
to by the fields of the bucket. To correctly free the memory allocated
for the bucket in such a case, the corresponding call to kfree is moved
from the algorithm-specific crush_destroy_bucket functions to the
generic crush_destroy_bucket().
Cc: stable@vger.kernel.org
Signed-off-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Commit 60f030f741 ("iommu/vt-d: Avoid use of NULL after WARN_ON_ONCE")
fixed a NULL pointer dereference in an unlikely situation partly.
If dev_pasid is not found in the dev_pasids list, it remains NULL.
However, the teardown operations are executed unconditionally, this lead
to a NULL pointer dereference or refcount corruption.
If the domain was never attached to this IOMMU, info will be NULL, which
would cause an immediate dereference when checking --info->refcnt.
Even if info is not NULL, decrementing the refcount without having removed
a valid PASID might unbalance the count. This could lead to premature
dropping of the refcount to 0, potentially causing a use-after-free for the
remaining active devices sharing the domain.
Fix it by returning early if dev_pasid is NULL, before executing the
teardown operations.
Issue found by AI review and suggested by Kevin Tian.
https://sashiko.dev/#/patchset/20260421031347.1408890-1-zhenzhong.duan%40intel.com
Fixes: 60f030f741 ("iommu/vt-d: Avoid use of NULL after WARN_ON_ONCE")
Cc: stable@vger.kernel.org
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20260422033538.95000-1-zhenzhong.duan@intel.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Intel Q35 integrated graphics (8086:29b2) exhibits broken DMAR
behaviour similar to other G4x/GM45 devices for which DMAR is
already disabled via quirks.
When DMAR is enabled, the system may hard lock up during boot or
early device initialization, requiring a reset.
Add the missing PCI ID to the existing quirk list to disable
DMAR for this device.
Fixes: 1f76249cc3 ("iommu/vt-d: Declare Broadwell igfx dmar support snafu")
Cc: stable@vger.kernel.org
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=201185
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=216064
Signed-off-by: Naval Alcalá <ari@naval.cat>
Link: https://lore.kernel.org/r/20260410161622.13549-1-ari@naval.cat
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
cpuset_can_attach() accumulates temporary SCHED_DEADLINE migration
state in the destination cpuset while walking the taskset.
If a later task_can_attach() or security_task_setscheduler() check
fails, cgroup_migrate_execute() treats cpuset as the failing subsystem
and does not call cpuset_cancel_attach() for it. The partially
accumulated state is then left behind and can be consumed by a later
attach, corrupting cpuset DL task accounting and pending DL bandwidth
accounting.
Reset the pending DL migration state from the common error exit when
ret is non-zero. Successful can_attach() keeps the state for
cpuset_attach() or cpuset_cancel_attach().
Fixes: 2ef269ef1a ("cgroup/cpuset: Free DL BW in case can_attach() fails")
Cc: stable@vger.kernel.org # v6.10+
Signed-off-by: Guopeng Zhang <zhangguopeng@kylinos.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Chen Ridong <chenridong@huaweicloud.com>
Reviewed-by: Waiman Long <longman@redhat.com>
When two aliased siblings are in the same iommu_group, they might share the
same RID. The reset functions don't support this case, though it is unclear
whether there is a real case of having an ATS capable device on a PCI/PCI-X
bus.
Theoretically, however, if two aliased devices are resetting concurrently,
one might be unblocked prematurely in the middle of the reset by the other
sibling who completes the reset first.
This isn't a regression from this series but it's better to spit a warning,
so we can know if such use case is common enough for us to make subsequent
patches for its coverage.
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
In __iommu_group_set_domain_internal(), concurrent domain attachments are
rejected when any device in the group is recovering. This is necessary to
fence concurrent attachments to a multi-device group where devices might
share the same RID due to PCI DMA alias quirks, but triggers the WARN_ON in
__iommu_group_set_domain_nofail().
Other IOMMU_SET_DOMAIN_MUST_SUCCEED callers in detach/teardown paths, such
as __iommu_group_set_core_domain and __iommu_release_dma_ownership, should
not be rejected, as the domain would be freed anyway in these nofail paths
while group->domain is still pointing to it. So pci_dev_reset_iommu_done()
could trigger a UAF when re-attaching group->domain.
Honor the IOMMU_SET_DOMAIN_MUST_SUCCEED flag, allowing the callers through
the group->recovery_cnt fence, so as to update the group->domain pointer.
Instead add a gdev->blocked check in the device iteration loop, to prevent
any concurrent per-device detachment.
Fixes: c279e83953 ("iommu: Introduce pci_dev_reset_iommu_prepare/done()")
Cc: stable@vger.kernel.org
Closes: https://sashiko.dev/#/patchset/20260407194644.171304-1-nicolinc%40nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
If a device is blocked, its PASID domains are already detached. Repeating
iommu_remove_dev_pasid() is unnecessary and might trigger ATS invalidation
timeouts.
Skip the iommu_remove_dev_pasid() call upon gdev->blocked.
Fixes: c279e83953 ("iommu: Introduce pci_dev_reset_iommu_prepare/done()")
Cc: stable@vger.kernel.org
Closes: https://sashiko.dev/#/patchset/20260407194644.171304-1-nicolinc%40nvidia.com
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Shuai found that cxl_reset_bus_function() calls pci_reset_bus_function()
internally while both are calling pci_dev_reset_iommu_prepare/done().
As pci_dev_reset_iommu_prepare() doesn't support re-entry, the inner call
will trigger a WARN_ON and return -EBUSY, resulting in failing the entire
device reset.
On the other hand, removing the outer calls in the PCI callers is unsafe.
As pointed out by Kevin, device-specific quirks like reset_hinic_vf_dev()
execute custom firmware waits after their inner pcie_flr() completes. If
the IOMMU protection relies solely on the inner reset, the IOMMU will be
unblocked prematurely while the device is still resetting.
Instead, fix this by making pci_dev_reset_iommu_prepare/done() reentrant.
Introduce gdev->reset_depth to handle the re-entries on the same device.
Fixes: c279e83953 ("iommu: Introduce pci_dev_reset_iommu_prepare/done()")
Cc: stable@vger.kernel.org
Reported-by: Shuai Xue <xueshuai@linux.alibaba.com>
Closes: https://lore.kernel.org/all/absKsk7qQOwzhpzv@Asurada-Nvidia/
Suggested-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
The core tracks device resetting states with a per-group resetting_domain,
while a reset is actually per group-device. Such a mismatch might lead to
confusion and even difficulty to untangle per-gdev handling requirement.
Shuai found that cxl_reset_bus_function() calls pci_reset_bus_function()
internally while both are calling pci_dev_reset_iommu_prepare/done(). And
the solution requires the core to track at the group_device level as well.
Introduce a 'blocked' flag to struct group_device, to allow a multi-device
group to isolate concurrent device resets independently.
As the reset routine is per gdev, it cannot clear group->resetting_domain
without iterating over the device list to ensure no other device is being
reset. Simplify it by replacing the resetting_domain with a 'recovery_cnt'
in the struct iommu_group.
No functional change. But this is essential to apply following bug fixes.
Fixes: c279e83953 ("iommu: Introduce pci_dev_reset_iommu_prepare/done()")
Cc: stable@vger.kernel.org
Reported-by: Shuai Xue <xueshuai@linux.alibaba.com>
Closes: https://lore.kernel.org/all/absKsk7qQOwzhpzv@Asurada-Nvidia/
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Local sashiko review pointed it out that group->domain could be NULL when
a default domain fails to allocate during the first probe, which can crash
at domain->ops->attach_dev dereference in __iommu_attach_device() invoked
by pci_dev_reset_iommu_done().
pci_dev_reset_iommu_prepare() is fine as an old_domain pointer can be NULL.
Skip the re-attach in pci_dev_reset_iommu_done() to fix the bug.
Fixes: c279e83953 ("iommu: Introduce pci_dev_reset_iommu_prepare/done()")
Cc: stable@vger.kernel.org
Signed-off-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
iommu_device_register() walks every device on the PCI bus via
bus_for_each_dev() and calls amd_iommu_probe_device() for each. The
inlined check_device() path computes the device's sbdf, calls
rlookup_amd_iommu() to find the owning IOMMU, and only afterwards
verifies devid <= pci_seg->last_bdf. __rlookup_amd_iommu() indexes
rlookup_table[devid] with no bounds check of its own, so for a PCI
device whose BDF is not described by the IVRS, the lookup reads past
the end of the allocation before the caller's bounds check can run.
This was harmless before commit e874c666b1 ("iommu/amd: Change
rlookup, irq_lookup, and alias to use kvalloc()"): the table was a
zeroed page-order allocation, so the over-read returned NULL and the
caller's NULL check skipped the device. After that commit the table is
a tight kvcalloc() and the over-read returns adjacent slab contents,
which check_device() then dereferences as a struct amd_iommu *,
causing a boot-time GPF.
Seen on Google Compute Engine ct6e VMs, where the virtualized IVRS
describes only the four TPU endpoints 00:04.0-07.0; the gVNIC at
00:08.0 (devid 0x40) indexes 56 bytes past the 456-byte allocation,
into the adjacent kmalloc-512 slab object:
pci 0000:00:04.0: Adding to iommu group 0
pci 0000:00:05.0: Adding to iommu group 1
pci 0000:00:06.0: Adding to iommu group 2
pci 0000:00:07.0: Adding to iommu group 3
Oops: general protection fault, probably for non-canonical address 0x3a64695f78746382: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.18.22 #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 12/06/2025
RIP: 0010:amd_iommu_probe_device+0x54/0x3a0
Call Trace:
__iommu_probe_device+0x107/0x520
probe_iommu_group+0x29/0x50
bus_for_each_dev+0x7e/0xe0
iommu_device_register+0xc9/0x240
iommu_go_to_state+0x9c0/0x1c60
amd_iommu_init+0x14/0x40
pci_iommu_init+0x16/0x60
do_one_initcall+0x47/0x2f0
Guard the array access in __rlookup_amd_iommu(). With the fix applied
on 6.18.22, the gVNIC at 00:08.0 is skipped cleanly and the VM boots.
Fixes: e874c666b1 ("iommu/amd: Change rlookup, irq_lookup, and alias to use kvalloc()")
Cc: stable@vger.kernel.org
Reported-by: Ziyuan Chen <zc@anthropic.com>
Tested-by: Ziyuan Chen <zc@anthropic.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Assisted-by: Claude:unspecified
Signed-off-by: Jose Fernandez (Anthropic) <jose.fernandez@linux.dev>
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
In iommu_mmio_write() and iommu_capability_write(), the variables
dbg_mmio_offset and dbg_cap_offset are declared as int. However, they
are populated using kstrtou32_from_user(). If a user provides a
sufficiently large value, it can become a negative integer.
Prior to this patch, the AMD IOMMU debugfs implementation was already
protected by different mechanisms.
1. #define OFS_IN_SZ 8 ensures the user string <= 8 bytes, so
e.g. 0xffffffff isn't a valid input.
if (cnt > OFS_IN_SZ)
return -EINVAL;
2. Implicit type promotion in iommu_mmio_write(), dbg_mmio_offset is int
and iommu->mmio_phys_end is u64
if (dbg_mmio_offset > iommu->mmio_phys_end - sizeof(u64))
return -EINVAL;
3. The show handlers would currently catch the negative number and
refuse to perform the read.
Replace kstrtou32_from_user() with kstrtos32_from_user() to parse the
input, and check for negative values to explicitly prevent out-of-bounds
memory accesses directly in iommu_mmio_write() and
iommu_capability_write().
Signed-off-by: Eder Zulian <ezulian@redhat.com>
Fixes: 7a4ee419e8 ("iommu/amd: Add debugfs support to dump IOMMU MMIO registers")
Cc: stable@vger.kernel.org
Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Under heavy concurrent attach/detach operations, scx_claim_exit() can
trigger a NULL pointer dereference. This can be reproduced running the
reload_loop kselftests inside a virtme-ng session:
$ vng -v -- ./tools/testing/selftests/sched_ext/runner -t reload_loop
...
BUG: kernel NULL pointer dereference, address: 0000000000000400
RIP: 0010:scx_claim_exit+0x3b/0x120
Call Trace:
<TASK>
bpf_scx_unreg+0x45/0xb0
bpf_struct_ops_map_link_dealloc+0x39/0x50
bpf_link_release+0x18/0x20
__fput+0x10b/0x2e0
__x64_sys_close+0x47/0xa0
The underlying race (diagnosed by Tejun Heo) is a stomp of @ops->priv,
not a missing NULL check:
T2 unreg(K) T1 reg(K)
----------- ---------
sch = ops->priv = sch_b800
scx_disable; flush_disable_work
[scx_root_disable: scx_root=NULL,
mutex_unlock, state=DISABLED]
mutex_lock; state ok
scx_alloc_and_add_sched:
ops->priv = sch_a800
scx_root = sch_a800; init=0
state=ENABLED; mutex_unlock
[flush returns]
RCU_INIT_POINTER(ops->priv, NULL) <-- clobbers sch_a800
kobject_put(sch_b800)
T1 acquires scx_enable_mutex inside scx_root_disable()'s mutex_unlock
window and starts a fresh attach on the same kdata, assigning sch_a800
to @ops->priv. T2 then continues out of scx_disable()/flush_disable_work
and clobbers @ops->priv to NULL, leaking sch_a800; the bpf_link is gone
but state stays SCX_ENABLED, so all future attaches fail with -EBUSY
permanently. The next bpf_scx_unreg() on that kdata then reads NULL
@ops->priv and dereferences it in scx_claim_exit().
Make @ops->priv the lifecycle binding: in scx_root_enable_workfn() and
scx_sub_enable_workfn(), after the existing state check and still under
scx_enable_mutex, refuse with -EBUSY if @ops->priv is non-NULL. This
rejects an attempt to reuse a kdata that is still bound to a previous
scheduler instance, closing the race without changing the unreg side.
Fixes: 105dcd005b ("sched_ext: Introduce scx_prog_sched()")
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Building the dequeue selftest with newer compilers (e.g., gcc 16)
triggers the following error:
dequeue.c:28:22: error: variable 'sum' set but not used
The 'volatile' qualifier prevents the writes from being optimized away,
but does not silence the unused variable 'sum' is indeed only written
and never read.
Consume 'sum' via an empty asm() with a register input constraint. This
forces the compiler to keep the accumulated value (preserving the CPU
stress loop) and avoiding the build error.
Fixes: 658ad2259b ("selftests/sched_ext: Add test to validate ops.dequeue() semantics")
Signed-off-by: Andrea Righi <arighi@nvidia.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
cg_read_strcmp() allocated a buffer sized to strlen(expected) + 1,
then passed it to read_text() which calls read(fd, buf, size-1).
When comparing against an empty string (""), strlen("") = 0 gives a
1-byte buffer, and read() is asked to read 0 bytes. The file content
is never actually read, so strcmp("", buf) always returns 0 regardless
of the real content. This caused cg_test_proc_killed() to always
report the cgroup as empty immediately, making OOM tests pass without
verifying that processes were killed.
Signed-off-by: Hongfu Li <lihongfu@kylinos.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
get_cg_pool_unlocked() handles allocation failures under dmemcg_lock by
dropping the lock, preallocating a pool with GFP_KERNEL, and retrying the
locked lookup and creation path.
If the fallback allocation fails too, pool remains NULL. Since the loop
condition is while (!pool), the function can keep retrying instead of
propagating the allocation failure to the caller.
Set pool to ERR_PTR(-ENOMEM) when the fallback allocation fails so the
loop exits through the existing common return path. The callers already
handle ERR_PTR() from get_cg_pool_unlocked(), so this restores the
expected error path.
Fixes: b168ed458d ("kernel/cgroup: Add "dmem" memory accounting cgroup")
Cc: stable@vger.kernel.org # v6.14+
Signed-off-by: Guopeng Zhang <zhangguopeng@kylinos.cn>
Signed-off-by: Tejun Heo <tj@kernel.org>
scx_fail_parent() leaves cgroup tasks at (state=NONE, sched=parent,
sched_class=ext) until the parent itself is torn down by the scx_error() it
raised. When the later root_disable iterates them, two paths trip on NONE.
scx_disable_and_exit_task() re-enters the wrapper at NONE: the inner switch
returns early but the trailing scx_set_task_sched(p, NULL) clobbers the
parent sched left by scx_fail_parent(), and scx_set_task_state(p, NONE)
wastes a write on an already-NONE task. switched_from_scx() then calls
scx_disable_task(), which WARNs on non-ENABLED state and writes state=READY,
producing a NONE -> READY transition the validation matrix rejects.
Treat NONE as "nothing to do" in both paths. Add a NONE early-return at the
top of scx_disable_and_exit_task() and a parallel NONE check in
switched_from_scx() next to task_dead_and_done().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
scx_sub_enable_workfn()'s init pass and scx_sub_disable() migration both
drop the rq lock to call __scx_init_task() against the other sched. A
TASK_DEAD @p can fall through sched_ext_dead() in that window.
sched_ext_dead() runs ops.exit_task() on the sched @p was attached to, not
on the sched whose init just completed, so the new allocation leaks.
Reuse the DEAD signal set by sched_ext_dead(). After __scx_init_task()
returns, take task_rq_lock(p) and check for DEAD; on hit, call
scx_sub_init_cancel_task() against the sub sched the init ran for and drop
@p; on miss, proceed as before.
Reported-by: zhidao su <suzhidao@xiaomi.com>
Link: https://lore.kernel.org/all/20260429133155.3825247-1-suzhidao@xiaomi.com/
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
scx_root_enable_workfn() drops the iter rq lock for ops.init_task() and a
TASK_DEAD @p can fall through sched_ext_dead() in that window. The race hits
when sched_ext_dead() observes SCX_TASK_INIT (the intermediate state before
@p->scx.sched is published) and dereferences NULL via SCX_HAS_OP(NULL,
exit_task), or observes SCX_TASK_NONE during the unlocked init window and
skips cleanup so exit_task() never runs.
Add SCX_TASK_INIT_BEGIN. The enable path writes NONE -> INIT_BEGIN under the
iter rq lock, then takes the rq lock again after init to walk INIT_BEGIN ->
INIT -> READY. sched_ext_dead() that wins the rq-lock race observes
INIT_BEGIN and sets DEAD without calling into ops; the post-init recheck
unwinds via scx_sub_init_cancel_task().
scx_fork() runs single-threaded against sched_ext_dead() (the task is not on
scx_tasks until scx_post_fork() adds it) so its INIT_BEGIN -> INIT walk
needs no rq-lock pairing; it rolls back to NONE on ops.init_task() failure.
The validation matrix grows the INIT_BEGIN row and the INIT_BEGIN -> DEAD
edge; INIT now requires INIT_BEGIN as the predecessor. scx_sub_disable()'s
migration writes INIT_BEGIN as a synthetic predecessor to satisfy the
tightened verification.
The sub-sched paths still race with sched_ext_dead() during the unlocked
init window. This will be fixed by the next patch.
Reported-by: zhidao su <suzhidao@xiaomi.com>
Link: https://lore.kernel.org/all/20260429133155.3825247-1-suzhidao@xiaomi.com/
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
SCX_TASK_OFF_TASKS marked tasks already through sched_ext_dead() so cgroup
task iteration would skip them. This can be expressed better with a task
state. Replace the flag with SCX_TASK_DEAD.
scx_disable_and_exit_task() resets state to NONE on its way out, so
sched_ext_dead() now sets DEAD after the wrapper returns. The validation
matrix grows NONE -> DEAD, warns on DEAD -> NONE, and tightens READY's
predecessor to INIT or ENABLED so the new DEAD value cannot silently
transition to READY.
Prepares for the following enable vs dead race fix.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Prepare for the SCX_TASK_INIT_BEGIN/DEAD work that follows by collapsing the
scx_init_task() helper. Move the SCX_TASK_RESET_RUNNABLE_AT setting into
scx_set_task_state() on the INIT transition (it was set unconditionally at
every INIT site through the scx_init_task() helper), inline scx_init_task()
into scx_fork() and scx_root_enable_workfn(), and drop the helper.
As a side effect, scx_sub_disable() migration sequence now also sets
RESET_RUNNABLE_AT (it previously wrote INIT directly without going through
scx_init_task()). The flag triggers a runnable_at reset on the next
set_task_runnable(), which is harmless on a task that has just been moved
between scheds.
On root-enable, p->scx.flags is written without the task's rq lock. The task
isn't visible to scx yet, and a follow-up patch restores the lock-held
write.
v2: Note p->scx.flags rq-lock relaxation on root-enable path. (Andrea)
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Cleanups in preparation for the state-machine work that follows:
- Convert three sub-sched call sites that open-code
rcu_assign_pointer(p->scx.sched, ...) to scx_set_task_sched().
- Move scx_get_task_state()/scx_set_task_state() above the SCX task iter
section so scx_task_iter_next_locked() can use them without a forward
declaration.
No functional change.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
The for_each_child_of_node() loop captures mdio_np via break,
holding the refcount. of_mdiobus_register() does not consume the
reference, so it leaks on success.
Put it after registration.
Fixes: e6ad767305 ("drivers: net: Add APM X-Gene SoC ethernet driver support.")
Signed-off-by: Shitalkumar Gandhi <shitalkumar.gandhi@cambiumnetworks.com>
Link: https://patch.msgid.link/20260507142024.811543-1-shitalkumar.gandhi@cambiumnetworks.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- fix integer overflow on buff_pos, by Lyes Bourennani
- fix invalid tp_meter access during teardown, by Jiexun Wang (2 patches)
- stop caching unowned originator pointers in BAT IV, by Jiexun Wang
- tp_meter: fix tp_num leak on kmalloc failure, by Sven Eckelmann
- fix BLA refcounting issues, by Sven Eckelmann (3 patches)
-----BEGIN PGP SIGNATURE-----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=JP6m
-----END PGP SIGNATURE-----
Merge tag 'batadv-net-pullrequest-20260508' of https://git.open-mesh.org/batadv
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- fix integer overflow on buff_pos, by Lyes Bourennani
- fix invalid tp_meter access during teardown, by Jiexun Wang (2 patches)
- stop caching unowned originator pointers in BAT IV, by Jiexun Wang
- tp_meter: fix tp_num leak on kmalloc failure, by Sven Eckelmann
- fix BLA refcounting issues, by Sven Eckelmann (3 patches)
* tag 'batadv-net-pullrequest-20260508' of https://git.open-mesh.org/batadv:
batman-adv: bla: put backbone reference on failed claim hash insert
batman-adv: bla: only purge non-released claims
batman-adv: bla: prevent use-after-free when deleting claims
batman-adv: tp_meter: fix tp_num leak on kmalloc failure
batman-adv: stop caching unowned originator pointers in BAT IV
batman-adv: stop tp_meter sessions during mesh teardown
batman-adv: reject new tp_meter sessions during teardown
batman-adv: fix integer overflow on buff_pos
====================
Link: https://patch.msgid.link/20260508154314.12817-1-sw@simonwunderlich.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move the phc->active check and resp pointer assignment to after
acquiring the spinlock. Previously, phc->active was checked without
holding the lock, and resp was cached from ena_dev->phc.virt_addr
before the lock was acquired.
If ena_com_phc_destroy() runs between the lockless active check and
the lock acquisition, it sets active=false, releases the lock, frees
the DMA memory, and sets virt_addr=NULL. The get_timestamp path would
then read a NULL virt_addr and dereference it.
With both the active check and the pointer read under the lock,
destroy cannot free the memory while get_timestamp is using it.
Fixes: e0ea34158e ("net: ena: Add PHC support in the ENA driver")
Cc: stable@vger.kernel.org
Signed-off-by: Arthur Kiyanovski <akiyano@amazon.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260508062126.7273-1-akiyano@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>