Add enumeration of the zicfilp and zicfiss extensions in the hwprobe syscall.
Reviewed-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Tested-by: Andreas Korb <andreas.korb@aisec.fraunhofer.de> # QEMU, custom CVA6
Tested-by: Valentin Haudiquet <valentin.haudiquet@canonical.com>
Link: https://patch.msgid.link/20251112-v5_user_cfi_series-v23-20-b55691eacf4f@rivosinc.com
[pjw@kernel.org: updated to apply; extend into RISCV_HWPROBE_KEY_IMA_EXT_1; clean patch description]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
We've run out of bits to describe RISC-V ISA extensions in our initial
hwprobe key, RISCV_HWPROBE_KEY_IMA_EXT_0. So, let's add
RISCV_HWPROBE_KEY_IMA_EXT_1, along with the framework to set the
appropriate hwprobe tuple, and add testing for it.
Based on a suggestion from Andrew Jones <andrew.jones@oss.qualcomm.com>,
also fix the documentation for RISCV_HWPROBE_KEY_IMA_EXT_0.
Reviewed-by: Andrew Jones <andrew.jones@oss.qualcomm.com>
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Expose a new register type NT_RISCV_USER_CFI for risc-v CFI status and
state. Intentionally, both landing pad and shadow stack status and
state are rolled into the CFI state. Creating two different
NT_RISCV_USER_XXX would not be useful and would waste a note
type. Enabling, disabling and locking the CFI feature is not allowed
via ptrace set interface. However, setting 'elp' state or setting
shadow stack pointer are allowed via the ptrace set interface. It is
expected that 'gdb' might need to fixup 'elp' state or 'shadow stack'
pointer.
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Tested-by: Andreas Korb <andreas.korb@aisec.fraunhofer.de> # QEMU, custom CVA6
Tested-by: Valentin Haudiquet <valentin.haudiquet@canonical.com>
Link: https://patch.msgid.link/20251112-v5_user_cfi_series-v23-19-b55691eacf4f@rivosinc.com
[pjw@kernel.org: updated to apply; cleaned patch description and comments; addressed checkpatch issues]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Save the shadow stack pointer in the sigcontext structure when
delivering a signal. Restore the shadow stack pointer from sigcontext
on sigreturn.
As part of the save operation, the kernel uses the 'ssamoswap'
instruction to save a snapshot of the current shadow stack on the
shadow stack itself (this can be called a "save token"). During
restore on sigreturn, the kernel retrieves the save token from the top
of the shadow stack and validates it. This ensures that user mode
can't arbitrarily pivot to any shadow stack address without having a
token and thus provides a strong security assurance during the window
between signal delivery and sigreturn.
Use an ABI-compatible way of saving/restoring the shadow stack pointer
into the signal stack. This follows the vector extension, where extra
registers are placed in a form of extension header + extension body in
the stack. The extension header indicates the size of the extra
architectural states plus the size of header itself, and a magic
identifier for the extension. Then, the extension body contains the
new architectural states in the form defined by uapi.
Signed-off-by: Andy Chiu <andy.chiu@sifive.com>
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Tested-by: Andreas Korb <andreas.korb@aisec.fraunhofer.de>
Tested-by: Valentin Haudiquet <valentin.haudiquet@canonical.com>
Link: https://patch.msgid.link/20251112-v5_user_cfi_series-v23-17-b55691eacf4f@rivosinc.com
[pjw@kernel.org: cleaned patch description, code comments; resolved checkpatch warning]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The Zicfiss and Zicfilp extensions introduce a new exception, the
'software check exception', in the privileged ISA, with cause code =
18. This patch implements support for software check exceptions.
Additionally, the patch implements a CFI violation handler which
checks the code in the xtval register. If xtval=2, the software check
exception happened because of an indirect branch that didn't land on a
4 byte aligned PC or on a 'lpad' instruction, or the label value
embedded in 'lpad' didn't match the label value set in the x7
register. If xtval=3, the software check exception happened due to a
mismatch between the link register (x1 or x5) and the top of shadow
stack (on execution of `sspopchk`).
In case of a CFI violation, SIGSEGV is raised with code=SEGV_CPERR.
SEGV_CPERR was introduced by the x86 shadow stack patches.
To keep uprobes working, handle the uprobe event first before
reporting the CFI violation in the software check exception
handler. This is because, when the landing pad is activated, if the
uprobe point is set at the lpad instruction at the beginning of a
function, the system triggers a software check exception instead of an
ebreak exception due to the exception priority. This would prevent
uprobe from working.
Reviewed-by: Zong Li <zong.li@sifive.com>
Co-developed-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Tested-by: Andreas Korb <andreas.korb@aisec.fraunhofer.de> # QEMU, custom CVA6
Tested-by: Valentin Haudiquet <valentin.haudiquet@canonical.com>
Link: https://patch.msgid.link/20251112-v5_user_cfi_series-v23-15-b55691eacf4f@rivosinc.com
[pjw@kernel.org: cleaned up the patch description]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
This patch adds a RISC-V implementation of the following prctls:
PR_SET_INDIR_BR_LP_STATUS, PR_GET_INDIR_BR_LP_STATUS and
PR_LOCK_INDIR_BR_LP_STATUS.
Reviewed-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Tested-by: Andreas Korb <andreas.korb@aisec.fraunhofer.de>
Tested-by: Valentin Haudiquet <valentin.haudiquet@canonical.com>
Link: https://patch.msgid.link/20251112-v5_user_cfi_series-v23-14-b55691eacf4f@rivosinc.com
[pjw@kernel.org: clean up patch description]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Three architectures (x86, aarch64, riscv) have support for indirect
branch tracking feature in a very similar fashion. On a very high
level, indirect branch tracking is a CPU feature where CPU tracks
branches which use a memory operand to transfer control. As part of
this tracking, during an indirect branch, the CPU expects a landing
pad instruction on the target PC, and if not found, the CPU raises
some fault (architecture-dependent).
x86 landing pad instr - 'ENDBRANCH'
arch64 landing pad instr - 'BTI'
riscv landing instr - 'lpad'
Given that three major architectures have support for indirect branch
tracking, this patch creates architecture-agnostic 'prctls' to allow
userspace to control this feature. They are:
- PR_GET_INDIR_BR_LP_STATUS: Get the current configured status for indirect
branch tracking.
- PR_SET_INDIR_BR_LP_STATUS: Set the configuration for indirect branch
tracking.
The following status options are allowed:
- PR_INDIR_BR_LP_ENABLE: Enables indirect branch tracking on user
thread.
- PR_INDIR_BR_LP_DISABLE: Disables indirect branch tracking on user
thread.
- PR_LOCK_INDIR_BR_LP_STATUS: Locks configured status for indirect branch
tracking for user thread.
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Tested-by: Andreas Korb <andreas.korb@aisec.fraunhofer.de> # QEMU, custom CVA6
Tested-by: Valentin Haudiquet <valentin.haudiquet@canonical.com>
Link: https://patch.msgid.link/20251112-v5_user_cfi_series-v23-13-b55691eacf4f@rivosinc.com
[pjw@kernel.org: cleaned up patch description, code comments]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Implement an architecture-agnostic prctl() interface for setting and
getting shadow stack status. The prctls implemented are
PR_GET_SHADOW_STACK_STATUS, PR_SET_SHADOW_STACK_STATUS and
PR_LOCK_SHADOW_STACK_STATUS.
As part of PR_SET_SHADOW_STACK_STATUS/PR_GET_SHADOW_STACK_STATUS, only
PR_SHADOW_STACK_ENABLE is implemented because RISCV allows each mode to
write to their own shadow stack using 'sspush' or 'ssamoswap'.
PR_LOCK_SHADOW_STACK_STATUS locks the current shadow stack enablement
configuration.
Reviewed-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Tested-by: Andreas Korb <andreas.korb@aisec.fraunhofer.de> # QEMU, custom CVA6
Tested-by: Valentin Haudiquet <valentin.haudiquet@canonical.com>
Link: https://patch.msgid.link/20251112-v5_user_cfi_series-v23-12-b55691eacf4f@rivosinc.com
[pjw@kernel.org: cleaned up patch description]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Userspace specifies CLONE_VM to share address space and spawn new
thread. 'clone' allows userspace to specify a new stack for a new
thread. However there is no way to specify a new shadow stack base
address without changing the API. This patch allocates a new shadow
stack whenever CLONE_VM is given.
In case of CLONE_VFORK, the parent is suspended until the child
finishes; thus the child can use the parent's shadow stack. In case of
!CLONE_VM, COW kicks in because entire address space is copied from
parent to child.
'clone3' is extensible and can provide mechanisms for specifying the
shadow stack as an input parameter. This is not settled yet and is
being extensively discussed on the mailing list. Once that's settled,
this code should be adapted.
Reviewed-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Tested-by: Andreas Korb <andreas.korb@aisec.fraunhofer.de> # QEMU, custom CVA6
Tested-by: Valentin Haudiquet <valentin.haudiquet@canonical.com>
Link: https://patch.msgid.link/20251112-v5_user_cfi_series-v23-11-b55691eacf4f@rivosinc.com
[pjw@kernel.org: cleaned up patch description]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
As discussed extensively in the changelog for the addition of this
syscall on x86 ("x86/shstk: Introduce map_shadow_stack syscall") the
existing mmap() and madvise() syscalls do not map entirely well onto the
security requirements for shadow stack memory since they lead to windows
where memory is allocated but not yet protected or stacks which are not
properly and safely initialised. Instead a new syscall map_shadow_stack()
has been defined which allocates and initialises a shadow stack page.
This patch implements this syscall for riscv. riscv doesn't require
tokens to be setup by kernel because user mode can do that by
itself. However to provide compatibility and portability with other
architectues, user mode can specify token set flag.
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Link: https://patch.msgid.link/20251112-v5_user_cfi_series-v23-10-b55691eacf4f@rivosinc.com
Link: https://lore.kernel.org/linux-riscv/aXfRPJvoSsOW8AwM@debug.ba.rivosinc.com/
[pjw@kernel.org: added allocate_shadow_stack() fix per Deepak; fixed bug found by sparse]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
'fork' implements copy-on-write (COW) by making pages readonly in both
child and parent.
ptep_set_wrprotect() and pte_wrprotect() clear _PAGE_WRITE in PTE.
The assumption is that the page is readable and, on a fault,
copy-on-write happens.
To implement COW on shadow stack pages, clearing the W bit makes them
XWR = 000. This will result in the wrong PTE setting, which allows no
permissions, but with V=1 and the PFN field pointing to the final
page. Instead, the desired behavior is to turn it into a readable
page, take an access (load/store) fault on sspush/sspop (shadow stack)
and then perform COW on such pages. This way regular reads would still
be allowed and not lead to COW maintaining current behavior of COW on
non-shadow stack but writeable memory.
On the other hand, this doesn't interfere with existing COW for
read-write memory. The assumption is always that _PAGE_READ must have
been set, and thus, setting _PAGE_READ is harmless.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Tested-by: Andreas Korb <andreas.korb@aisec.fraunhofer.de> # QEMU, custom CVA6
Tested-by: Valentin Haudiquet <valentin.haudiquet@canonical.com>
Link: https://patch.msgid.link/20251112-v5_user_cfi_series-v23-9-b55691eacf4f@rivosinc.com
[pjw@kernel.org: clarify patch description]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
pte_mkwrite() creates PTEs with WRITE encodings for the underlying
architecture. The underlying architecture can have two types of
writeable mappings: one that can be written using regular store
instructions, and another one that can only be written using
specialized store instructions (like shadow stack stores).
pte_mkwrite can select write PTE encoding based on VMA range (i.e.
VM_SHADOW_STACK)
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Tested-by: Andreas Korb <andreas.korb@aisec.fraunhofer.de> # QEMU, custom CVA6
Tested-by: Valentin Haudiquet <valentin.haudiquet@canonical.com>
Link: https://patch.msgid.link/20251112-v5_user_cfi_series-v23-8-b55691eacf4f@rivosinc.com
[pjw@kernel.org: cleaned up patch description]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
This patch implements the creation of a shadow stack pte on
riscv. Creating shadow stack PTE on riscv means clearing RWX and then
setting W=1.
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Tested-by: Andreas Korb <andreas.korb@aisec.fraunhofer.de> # QEMU, custom CVA6
Tested-by: Valentin Haudiquet <valentin.haudiquet@canonical.com>
Link: https://patch.msgid.link/20251112-v5_user_cfi_series-v23-7-b55691eacf4f@rivosinc.com
[pjw@kernel.org: cleaned up patch description]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
'arch_calc_vm_prot_bits' is implemented on risc-v to return VM_READ |
VM_WRITE if PROT_WRITE is specified. Similarly 'riscv_sys_mmap' is
updated to convert all incoming PROT_WRITE to (PROT_WRITE | PROT_READ).
This is to make sure that any existing apps using PROT_WRITE still work.
Earlier 'protection_map[VM_WRITE]' used to pick read-write PTE encodings.
Now 'protection_map[VM_WRITE]' will always pick PAGE_SHADOWSTACK PTE
encodings for shadow stack. The above changes ensure that existing apps
continue to work because underneath, the kernel will be picking
'protection_map[VM_WRITE|VM_READ]' PTE encodings.
Reviewed-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Tested-by: Andreas Korb <andreas.korb@aisec.fraunhofer.de> # QEMU, custom CVA6
Tested-by: Valentin Haudiquet <valentin.haudiquet@canonical.com>
Link: https://patch.msgid.link/20251112-v5_user_cfi_series-v23-6-b55691eacf4f@rivosinc.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Carve out space in the RISC-V architecture-specific thread struct for
cfi status and shadow stack in usermode.
This patch:
- defines a new structure cfi_status with status bit for cfi feature
- defines shadow stack pointer, base and size in cfi_status structure
- defines offsets to new member fields in thread in asm-offsets.c
- saves and restores shadow stack pointer on trap entry (U --> S) and exit
(S --> U)
Shadow stack save/restore is gated on feature availability and is
implemented using alternatives. CSR_SSP can be context-switched in
'switch_to' as well, but as soon as kernel shadow stack support gets
rolled in, the shadow stack pointer will need to be switched at trap
entry/exit point (much like 'sp'). It can be argued that a kernel
using a shadow stack deployment scenario may not be as prevalent as
user mode using this feature. But even if there is some minimal
deployment of kernel shadow stack, that means that it needs to be
supported. Thus save/restore of shadow stack pointer is implemented
in entry.S instead of in 'switch_to.h'.
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Tested-by: Andreas Korb <andreas.korb@aisec.fraunhofer.de> # QEMU, custom CVA6
Tested-by: Valentin Haudiquet <valentin.haudiquet@canonical.com>
Link: https://patch.msgid.link/20251112-v5_user_cfi_series-v23-5-b55691eacf4f@rivosinc.com
[pjw@kernel.org: cleaned up patch description]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
The Zicfiss and Zicfilp extensions are enabled via b3 and b2 in
*envcfg CSRs. menvcfg controls enabling for S/HS mode. henvcfg
controls enabling for VS. senvcfg controls enabling for U/VU mode.
The Zicfilp extension extends *status CSRs to hold an 'expected
landing pad' bit. A trap or interrupt can occur between an indirect
jmp/call and target instruction. The 'expected landing pad' bit from
the CPU is recorded into the xstatus CSR so that when the supervisor
performs xret, the 'expected landing pad' state of the CPU can be
restored.
Zicfiss adds one new CSR, CSR_SSP, which contains the current shadow
stack pointer.
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Andreas Korb <andreas.korb@aisec.fraunhofer.de> # QEMU, custom CVA6
Tested-by: Valentin Haudiquet <valentin.haudiquet@canonical.com>
Link: https://patch.msgid.link/20251112-v5_user_cfi_series-v23-4-b55691eacf4f@rivosinc.com
[pjw@kernel.org: grouped CSR_SSP macro with the other CSR macros; clarified patch description]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
This patch adds support for detecting the RISC-V ISA extensions
Zicfiss and Zicfilp. Zicfiss and Zicfilp stand for the unprivileged
integer spec extensions for shadow stack and indirect branch tracking,
respectively.
This patch looks for Zicfiss and Zicfilp in the device tree and
accordingly lights up the corresponding bits in the cpu feature
bitmap. Furthermore this patch adds detection utility functions to
return whether shadow stack or landing pads are supported by the cpu.
Reviewed-by: Zong Li <zong.li@sifive.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Tested-by: Andreas Korb <andreas.korb@aisec.fraunhofer.de> # QEMU, custom CVA6
Tested-by: Valentin Haudiquet <valentin.haudiquet@canonical.com>
Link: https://patch.msgid.link/20251112-v5_user_cfi_series-v23-3-b55691eacf4f@rivosinc.com
[pjw@kernel.org: updated to apply; cleaned up patch description]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Reduce nested max() calls by a single max3() call in this
function implementation.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Link: https://patch.msgid.link/d1a384c9-f154-4537-94d6-c3613f4167bc@web.de
Signed-off-by: Paul Walmsley <pjw@kernel.org>
NLS_ISO8859_1 was enabled as a module with commit efe1e08bca ("riscv:
defconfig: enable NLS_CODEPAGE_437, NLS_ISO8859_1"), but the
NLS_CODEPAGE_437 counterpart is selected as built-in. The commit does
not explain the reason behind, and it is not consistent with the
defconfig for ARM64 that also enables these modules to mount EFI system
partitions.
Select NLS_ISO8859_1 as built-in to provide both requirements within the
kernel image.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://patch.msgid.link/20260111-nls_iso8859_1_y_riscv-v1-1-2c992bb2c00d@gmail.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Currently, the implementation of copy_user_page() is identical to
copy_page().
Align riscv with other architectures (alpha, arc, arm64, hexagon,
longarch, m68k, openrisc, s390, um, xtensa) and map copy_user_page()
to copy_page() given that their implementation is identical.
In addition to following a common pattern, this centralizes the
implementation. Any changes to the underlying page copy logic (e.g.,
for CHERI) will now automatically propagate to copy_user_page().
Signed-off-by: Florian Schmaus <florian.schmaus@codasip.com>
Link: https://patch.msgid.link/20260113134025.905627-1-florian.schmaus@codasip.com
Signed-off-by: Paul Walmsley <pjw@kernel.org>
When both the SiFive and MIPS errata are enabled then
sifive_errata_patch_func emits a wrong and misleading warning claiming
that the SiFive errata haven't been applied. This happens because
sifive_errata_patch_func is being called twice, once for the kernel image
and once for the vdso image. The vdso image has alternative entries
for the MIPS errata, but none for the SiFive errata.
Signed-off-by: Andreas Schwab <schwab@suse.de>
Link: https://patch.msgid.link/mvmv7i8q8gg.fsf@suse.de
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Some developers may be confused because RISC-V does not have
a register named r0. Also, orig_r0 is not available in pt_regs structure,
which is specific to riscv. So we had better fix this minor typo.
Signed-off-by: Austin Kim <austin.kim@lge.com>
Link: https://patch.msgid.link/aW3Z4zTBvGJpk7a7@adminpc-PowerEdge-R7525
Signed-off-by: Paul Walmsley <pjw@kernel.org>
Clean up a few warnings reported by sparse in
arch/riscv/kernel/signal.c. These come from code that was added
recently; they were missed when I initially reviewed the patch.
Fixes: 818d78ba1b ("riscv: signal: abstract header saving for setup_sigcontext")
Cc: Andy Chiu <andybnac@gmail.com>
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202601171848.ydLTJYrz-lkp@intel.com/
[pjw@kernel.org: updated to apply]
Signed-off-by: Paul Walmsley <pjw@kernel.org>
only one core change, the rest are drivers. The core change reorders
some state operations in the error handler to try to prevent missed
wake ups of the error handler (which can halt error processing and
effectively freeze the entire system).
Signed-off-by: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
-----BEGIN PGP SIGNATURE-----
iLgEABMIAGAWIQTnYEDbdso9F2cI+arnQslM7pishQUCaXZkyRsUgAAAAAAEAA5t
YW51MiwyLjUrMS4xMSwyLDImHGphbWVzLmJvdHRvbWxleUBoYW5zZW5wYXJ0bmVy
c2hpcC5jb20ACgkQ50LJTO6YrIWQoAD9GhKN9FMdjxlLtb7cuy3GJq41QnOaTJ7K
ze12EznP6RgA/RODy+aKgL9+NQXOLBycfDjUzzYDzA5BTUtR2dg4Zt5E
=eS8f
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Only one core change, the rest are drivers.
The core change reorders some state operations in the error handler to
try to prevent missed wake ups of the error handler (which can halt
error processing and effectively freeze the entire system)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qla2xxx: Sanitize payload size to prevent member overflow
scsi: target: iscsi: Fix use-after-free in iscsit_dec_session_usage_count()
scsi: target: iscsi: Fix use-after-free in iscsit_dec_conn_usage_count()
scsi: core: Wake up the error handler when final completions race against each other
scsi: storvsc: Process unsupported MODE_SENSE_10
scsi: xen: scsiback: Fix potential memory leak in scsiback_remove()
This a late fix for v6.19.
BR, Jarkko
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRE6pSOnaBC00OEHEIaerohdGur0gUCaXZO3gAKCRAaerohdGur
0lIAAQCZwC7ZDCJiygqv4RJkllD4p7D0TE5A+QThYZM4ICM1nQD/cTCpj+JpPkPo
+/ioRefxKl1TzXo6yarGgTUa2GhdvwM=
=9PUF
-----END PGP SIGNATURE-----
Merge tag 'keys-trusted-next-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull keys fix from Jarkko Sakkinen.
* tag 'keys-trusted-next-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
keys/trusted_keys: fix handle passed to tpm_buf_append_name during unseal
Here are some small char/misc/iio and some other minor driver subsystem
fixes for 6.19-rc7. Nothing huge here, just some fixes for reported
issues including:
- lots of little iio driver fixes
- comedi driver fixes
- mux driver fix
- w1 driver fixes
- uio driver fix
- slimbus driver fixes
- hwtracing bugfix
- other tiny bugfixes
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaXY0dA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylkhgCgvwYNIuJosuQRKK0sFTOR1Utig3sAn2g6E2H9
AOZZ43qoosl++HsuXDLP
=XzfC
-----END PGP SIGNATURE-----
Merge tag 'char-misc-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/iio driver fixes from Greg KH:
"Here are some small char/misc/iio and some other minor driver
subsystem fixes for 6.19-rc7. Nothing huge here, just some fixes for
reported issues including:
- lots of little iio driver fixes
- comedi driver fixes
- mux driver fix
- w1 driver fixes
- uio driver fix
- slimbus driver fixes
- hwtracing bugfix
- other tiny bugfixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (36 commits)
comedi: dmm32at: serialize use of paged registers
mei: trace: treat reg parameter as string
uio: pci_sva: correct '-ENODEV' check logic
uacce: ensure safe queue release with state management
uacce: implement mremap in uacce_vm_ops to return -EPERM
uacce: fix isolate sysfs check condition
uacce: fix cdev handling in the cleanup path
slimbus: core: clean up of_slim_get_device()
slimbus: core: fix of_slim_get_device() kernel doc
slimbus: core: amend slim_get_device() kernel doc
slimbus: core: fix device reference leak on report present
slimbus: core: fix runtime PM imbalance on report present
slimbus: core: fix OF node leak on registration failure
intel_th: rename error label
intel_th: fix device leak on output open()
comedi: Fix getting range information for subdevices 16 to 255
mux: mmio: Fix IS_ERR() vs NULL check in probe()
interconnect: debugfs: initialize src_node and dst_node to empty strings
iio: dac: ad3552r-hs: fix out-of-bound write in ad3552r_hs_write_data_source
iio: accel: iis328dq: fix gain values
...
Here are 3 small serial driver fixes for 6.19-rc7 that resolve some
reported issues. They include:
- tty->port race condition fix for a reported problem
- qcom_geni serial driver fix
- 8250_pci serial driver fix
All of these have been in linux-next with no reported issues
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaXY1Ow8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylO9gCeNnCW0Z4/UcDhgyw033D4pvB9EvUAn2/fXgLd
zd7zEVcx0Xn1oMYDx6Dp
=4Tw5
-----END PGP SIGNATURE-----
Merge tag 'tty-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are three small serial driver fixes for 6.19-rc7 that resolve
some reported issues. They include:
- tty->port race condition fix for a reported problem
- qcom_geni serial driver fix
- 8250_pci serial driver fix
All of these have been in linux-next with no reported issues"
* tag 'tty-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: Fix not set tty->port race condition
serial: 8250_pci: Fix broken RS485 for F81504/508/512
serial: qcom_geni: Fix BT failure regression on RB2 platform
k1: drop wrong IRQF_ONESHOT from IRQ request to fix genirq warning
-----BEGIN PGP SIGNATURE-----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=u22+
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
- k1: drop wrong IRQF_ONESHOT from IRQ request to fix genirq warning
* tag 'i2c-for-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: spacemit: drop IRQF_ONESHOT flag from IRQ request
- a couple quirks to i8042 to enable keyboard on a Asus and MECHREVO
laptops.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCaXWxMAAKCRBAj56VGEWX
nMznAQDw4ewqL3q8ere2waxxBS8AHzT9EhD7hwCsU2vA8BmerwD/cnaYaYk9rLyI
siZkL7+tJHnptiqoakg72Ol9Y4RjGA0=
=18Ic
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a couple of quirks to i8042 to enable keyboard on a Asus and MECHREVO
laptops
* tag 'input-for-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: i8042 - add quirks for MECHREVO Wujie 15X Pro
Input: i8042 - add quirk for ASUS Zenbook UX425QA_UM425QA
TPM2_Unseal[1] expects the handle of a loaded data object, and not the
handle of the parent key. But the tpm2_unseal_cmd provides the parent
keyhandle instead of blob_handle for the session HMAC calculation. This
causes unseal to fail.
Fix this by passing blob_handle to tpm_buf_append_name().
References:
[1] trustedcomputinggroup.org/wp-content/uploads/
Trusted-Platform-Module-2.0-Library-Part-3-Version-184_pub.pdf
Fixes: 6e9722e9a7 ("tpm2-sessions: Fix out of range indexing in name_size")
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
The MECHREVO Wujie 15X Pro requires several i8042 quirks to function
correctly. Specifically, NOMUX, RESET_ALWAYS, NOLOOP, and NOPNP are
needed to ensure the keyboard and touchpad work reliably.
Signed-off-by: gongqi <550230171hxy@gmail.com>
Link: https://patch.msgid.link/20260122155501.376199-3-550230171hxy@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The ASUS Zenbook UX425QA_UM425QA fails to initialize the keyboard after
a cold boot.
A quirk already exists for "ZenBook UX425", but some Zenbooks report
"Zenbook" with a lowercase 'b'. Since DMI matching is case-sensitive,
the existing quirk is not applied to these "extra special" Zenbooks.
Testing confirms that this model needs the same quirks as the ZenBook
UX425 variants.
Signed-off-by: feng <alec.jiang@gmail.com>
Link: https://patch.msgid.link/20260122013957.11184-1-alec.jiang@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
- Fix the RISC-V timer compare register update sequence on RV32
systems to use the recommended sequence in the RISC-V ISA manual.
This avoids spurious interrupts during updates.
- Add a dependence on the new CONFIG_CACHEMAINT_FOR_DMA Kconfig symbol
for Renesas and StarFive RISC-V SoCs
- Add a temporary workaround for a Clang compiler bug caused by using
asm_goto_output for get_user()
- Clarify our documentation to specifically state a particular ISA
specification version for a chapter number reference
-----BEGIN PGP SIGNATURE-----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=XHMU
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Paul Walmsley:
"The notable changes here are the three RISC-V timer compare register
update sequence patches. These only apply to RV32 systems and are
related to the 64-bit timer compare value being split across two
separate 32-bit registers.
We weren't using the appropriate three-write sequence, documented in
the RISC-V ISA specifications, to avoid spurious timer interrupts
during the update sequence; so, these patches now use the recommended
sequence.
This doesn't affect 64-bit RISC-V systems, since the timer compare
value fits inside a single register and can be updated with a single
write.
- Fix the RISC-V timer compare register update sequence on RV32
systems to use the recommended sequence in the RISC-V ISA manual
This avoids spurious interrupts during updates
- Add a dependence on the new CONFIG_CACHEMAINT_FOR_DMA Kconfig
symbol for Renesas and StarFive RISC-V SoCs
- Add a temporary workaround for a Clang compiler bug caused by using
asm_goto_output for get_user()
- Clarify our documentation to specifically state a particular ISA
specification version for a chapter number reference"
* tag 'riscv-for-linus-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Add intermediate cast to 'unsigned long' in __get_user_asm
riscv: Use 64-bit variable for output in __get_user_asm
soc: renesas: Fix missing dependency on new CONFIG_CACHEMAINT_FOR_DMA
riscv: ERRATA_STARFIVE_JH7100: Fix missing dependency on new CONFIG_CACHEMAINT_FOR_DMA
riscv: suspend: Fix stimecmp update hazard on RV32
riscv: kvm: Fix vstimecmp update hazard on RV32
riscv: clocksource: Fix stimecmp update hazard on RV32
Documentation: riscv: uabi: Clarify ISA spec version for canonical order
- Fix a crash with passing a stacktrace between synthetic events
A synthetic event is an event that combines two events into a single event
that can display fields from both events as well as the time delta that
took place between the events. It can also pass a stacktrace from the
first event so that it can be displayed by the synthetic event (this is
useful to get a stacktrace of a task scheduling out when blocked and
recording the time it was blocked for).
A synthetic event can also connect an existing synthetic event to another
event. An issue was found that if the first synthetic event had a stacktrace
as one of its fields, and that stacktrace field was passed to the new
synthetic event to be displayed, it would crash the kernel. This was due to
the stacktrace not being saved as a stacktrace but was still marked as one.
When the stacktrace was read, it would try to read an array but instead read
the integer metadata of the stacktrace and dereferenced a bad value.
Fix this by saving the stacktrace field as a stracktrace.
- Fix possible overflow in cmp_mod_entry() compare function
A binary search is used to find a module address and if the addresses are
greater than 2GB apart it could lead to truncation and cause a bad search
result. Use normal compares instead of a subtraction between addresses to
calculate the compare value.
- Fix output of entry arguments in function graph tracer
Depending on the configurations enabled, the entry can be two different
types that hold the argument array. The macro FGRAPH_ENTRY_ARGS() is used
to find the correct arguments from the given type. One location was missed
and still referenced the arguments directly via entry->args and could
produce the wrong value depending on how the kernel was configured.
- Fix memory leak in scripts/tracepoint-update build tool
If the array fails to allocate, the memory for the values needs to be
freed and was not. Free the allocated values if the array failed to
allocate.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaXUQLxQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qgsJAQDgtWH9DWUkJKgzXTkiOA0l8JArPOVf
tCSMla2wWJA70QD/as2ptacYAFU9v1oxO5YIgsKOLFBF68ZUIhJtvXpqtAE=
=JeC6
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing fixes from Steven Rostedt:
- Fix a crash with passing a stacktrace between synthetic events
A synthetic event is an event that combines two events into a single
event that can display fields from both events as well as the time
delta that took place between the events. It can also pass a
stacktrace from the first event so that it can be displayed by the
synthetic event (this is useful to get a stacktrace of a task
scheduling out when blocked and recording the time it was blocked
for).
A synthetic event can also connect an existing synthetic event to
another event. An issue was found that if the first synthetic event
had a stacktrace as one of its fields, and that stacktrace field was
passed to the new synthetic event to be displayed, it would crash the
kernel. This was due to the stacktrace not being saved as a
stacktrace but was still marked as one. When the stacktrace was read,
it would try to read an array but instead read the integer metadata
of the stacktrace and dereferenced a bad value.
Fix this by saving the stacktrace field as a stacktrace.
- Fix possible overflow in cmp_mod_entry() compare function
A binary search is used to find a module address and if the addresses
are greater than 2GB apart it could lead to truncation and cause a
bad search result. Use normal compares instead of a subtraction
between addresses to calculate the compare value.
- Fix output of entry arguments in function graph tracer
Depending on the configurations enabled, the entry can be two
different types that hold the argument array. The macro
FGRAPH_ENTRY_ARGS() is used to find the correct arguments from the
given type. One location was missed and still referenced the
arguments directly via entry->args and could produce the wrong value
depending on how the kernel was configured.
- Fix memory leak in scripts/tracepoint-update build tool
If the array fails to allocate, the memory for the values needs to be
freed and was not. Free the allocated values if the array failed to
allocate.
* tag 'trace-v6.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
scripts/tracepoint-update: Fix memory leak in add_string() on failure
function_graph: Fix args pointer mismatch in print_graph_retval()
tracing: Avoid possible signed 64-bit truncation
tracing: Fix crash on synthetic stacktrace field usage
Document project continuity procedures. This is a plan for a plan for
navigating events that affect the forward progress of the canonical
Linux repository, torvalds/linux.git.
It is a follow-up from Maintainer Summit [1].
Co-developed-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Kees Cook <kees@kernel.org>
Reviewed-by: Jiri Kosina <jkosina@suse.com>
Reviewed-by: Steven Rostedt <rostedt@goodmis.org>
Link: https://lwn.net/Articles/1050179/ [1]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Always inline I/O and IRQ methods using build_assert!() to avoid
false positive build errors.
- Do not free the driver's device private data in I2C shutdown()
avoiding race conditions that can lead to UAF bugs.
- Drop the driver's device private data after the driver has been
fully unbound from its device to avoid UAF bugs from &Device<Bound>
scopes, such as IRQ callbacks.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQS2q/xV6QjXAdC7k+1FlHeO1qrKLgUCaXTJdAAKCRBFlHeO1qrK
Lqt/AQDN7X8D6ABCPpYVZ0KKZZulLXjmv52CqtXc1IHBuergCgD/TEOu+t41amVb
EkSO6/yN/NwMP0+eEF+XT1ybM3CYDQI=
=8bg5
-----END PGP SIGNATURE-----
Merge tag 'driver-core-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core
Pull driver core fixes from Danilo Krummrich:
- Always inline I/O and IRQ methods using build_assert!() to avoid
false positive build errors
- Do not free the driver's device private data in I2C shutdown()
avoiding race conditions that can lead to UAF bugs
- Drop the driver's device private data after the driver has been
fully unbound from its device to avoid UAF bugs from &Device<Bound>
scopes, such as IRQ callbacks
* tag 'driver-core-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/driver-core/driver-core:
rust: driver: drop device private data post unbind
rust: driver: add DriverData type to the DriverLayout trait
rust: driver: add DEVICE_DRIVER_OFFSET to the DriverLayout trait
rust: driver: introduce a DriverLayout trait
rust: auxiliary: add Driver::unbind() callback
rust: i2c: do not drop device private data on shutdown()
rust: irq: always inline functions using build_assert with arguments
rust: io: always inline functions using build_assert with arguments
- Fix PELT clock synchronization bug when entering idle
- Disable the NEXT_BUDDY feature, as during extensive testing
Mel found that the negatives outweigh the positives.
- Make wakeup preemption less aggressive, which resulted in
an unreasonable increase in preemption frequency.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAml0kYYRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1j/Bw/+M5UK6EOPzLTs0Tj87X/kI7vXLN/uf9+K
FpDtFNmoJnJKrQxPFfa8aT8OAz7zLfnjrGmRgxOG1fFkACMuB8s+TO4+i9lhzAsF
gHOg6lDczi4K14mkTyiP/Bdaf3lZThghZitdRCBZFN4gjBpAh1rRI4ikQ0a3pwJH
6y1NF8fX/xRBm6Bgprgbv/em+fKsO89i6NwunPtYaxHsOGA5U0FVPFSa3yghz+X2
7Sl4U8LRdkU3Z62M+I8DKWuAMMb9nLwEXrSiNy+KJHIJ7FNFb1+U10gPrLq+z2Oi
hvd25pzDzGUgOglZ7f1IRL5H48putMjCqv+A2wOZnzl7fHt4c02hpTBqMDle5hEP
DYHyNNC1ZIRQ1zuy8j33LzB10ycP6pX9nawt+S1trEZcDVwaKwq9TbYsBjbJKtmZ
V7C181fTUaNQ6M4wJY3gx+hD1ocrLv+Y0vhXJnK7sg+j4IhWJ7Yk6ne9hrpXbbUj
cK8gzvo4OkShYtMlB9ut/RIiuyvFThyJd9rcNkeN4tTM9DVFURvOlIK2W6U70Yty
OJDkhI6KBmkERPQoa43OsGvxZwF+g0KY8ISsLq3bJ2vLyATPdpJ2ns+zRg6I+B+q
zHZmI86Fc8gr+O/y9oqi2VJhgio34RcoSId/QcAPC1Gl4TaIcmqFFTSzMhI+kLk9
Ng7vHy/3KQg=
=pGnx
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2026-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Ingo Molnar:
- Fix PELT clock synchronization bug when entering idle
- Disable the NEXT_BUDDY feature, as during extensive testing
Mel found that the negatives outweigh the positives
- Make wakeup preemption less aggressive, which resulted in
an unreasonable increase in preemption frequency
* tag 'sched-urgent-2026-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: Revert force wakeup preemption
sched/fair: Disable scheduler feature NEXT_BUDDY
sched/fair: Fix pelt clock sync when entering idle
- Fix mmap_count warning & bug when creating a group member event
with the PERF_FLAG_FD_OUTPUT flag.
- Disable the sample period == 1 branch events BTS optimization
on guests, because BTS is not virtualized.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=lNSW
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-2026-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf events fixes from Ingo Molnar:
- Fix mmap_count warning & bug when creating a group member event
with the PERF_FLAG_FD_OUTPUT flag
- Disable the sample period == 1 branch events BTS optimization
on guests, because BTS is not virtualized
* tag 'perf-urgent-2026-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Do not enable BTS for guests
perf: Fix refcount warning on event->mmap_count increment
- Fix spurious interrupts during resume in the renesas-rzv2h driver
- Fix a 32+ bit physical memory truncation bug in the gic-v3-its
driver
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=pNjT
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2026-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
- Fix spurious interrupts during resume in the renesas-rzv2h driver
- Fix a 32+ bit physical memory truncation bug in the gic-v3-its driver
* tag 'irq-urgent-2026-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/gic-v3-its: Avoid truncating memory addresses
irqchip/renesas-rzv2h: Prevent TINT spurious interrupt during resume
- Ensure early return semantics are preserved for pKVM fault handlers
- Fix case where the kernel runs with the guest's PAN value when
CONFIG_ARM64_PAN is not set
- Make stage-1 walks to set the access flag respect the access
permission of the underlying stage-2, when enabled
- Propagate computed FGT values to the pKVM view of the vCPU at
vcpu_load()
- Correctly program PXN and UXN privilege bits for hVHE's stage-1 page
tables
- Check that the VM is actually using VGICv3 before accessing the GICv3
CPU interface
- Delete some unused code
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAml0eFAUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroP+6Qf/QyjSaQHurVqfigKoj4XI9QsF2IoD
m4anhrLyzkcE1vMShHkaw6Xx7GjZcrbCqZ5L1qY94B4yUdIaFGR5hkGYPX4OXqrn
XP6Oq5lO+1iOzxfOQ+7gZVBYBIHt6OBjFpBRxv9AtRHuin1GkxEmh7g5oPsy/zT6
8IHCtf85mnJXZNDGwVuzII1QXj4CnYwCL37lzNTo+bzf9os7Xtn1RSj3p2OoMKsM
IKzF2oevMblj3r+L4pOQLXkc22S5OF3nkti+Q6uu2nBoiZ9ivWOTHxjkYU5QAXwm
tyRkEMHuV5zNGIaAhRDe+0wxx0iD5DTJQfioE+z8vfLASqZ8nmY5DRyaQw==
=+Y93
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull arm64 kvm fixes from Paolo Bonzini:
- Ensure early return semantics are preserved for pKVM fault handlers
- Fix case where the kernel runs with the guest's PAN value when
CONFIG_ARM64_PAN is not set
- Make stage-1 walks to set the access flag respect the access
permission of the underlying stage-2, when enabled
- Propagate computed FGT values to the pKVM view of the vCPU at
vcpu_load()
- Correctly program PXN and UXN privilege bits for hVHE's stage-1 page
tables
- Check that the VM is actually using VGICv3 before accessing the GICv3
CPU interface
- Delete some unused code
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: arm64: Invert KVM_PGTABLE_WALK_HANDLE_FAULT to fix pKVM walkers
KVM: arm64: Don't blindly set set PSTATE.PAN on guest exit
KVM: arm64: nv: Respect stage-2 write permssion when setting stage-1 AF
KVM: arm64: Remove unused vcpu_{clear,set}_wfx_traps()
KVM: arm64: Remove unused parameter in synchronize_vcpu_pstate()
KVM: arm64: Remove extra argument for __pvkm_host_{share,unshare}_hyp()
KVM: arm64: Inject UNDEF for a register trap without accessor
KVM: arm64: Copy FGT traps to unprotected pKVM VCPU on VCPU load
KVM: arm64: Fix EL2 S1 XN handling for hVHE setups
KVM: arm64: gic: Check for vGICv3 when clearing TWI
k1: drop IRQF_ONESHOT from IRQ request to fix genirq warning.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQScDfrjQa34uOld1VLaeAVmJtMtbgUCaXNp+wAKCRDaeAVmJtMt
bv0EAP4405vU1RTez3QVILfBC6hH9AUfm6eWReBmzuKBdvZJOwD/bCF+Avv0ev6Z
pfQbVjWAAqkP6QWQjPLRdH0ZJy4UkQ8=
=kaCb
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-fixes-6.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
i2c-host-fixes for v6.19-rc7
k1: drop IRQF_ONESHOT from IRQ request to fix genirq warning.
- Ensure early return semantics are preserved for pKVM fault handlers
- Fix case where the kernel runs with the guest's PAN value when
CONFIG_ARM64_PAN is not set
- Make stage-1 walks to set the access flag respect the access
permission of the underlying stage-2, when enabled
- Propagate computed FGT values to the pKVM view of the vCPU at
vcpu_load()
- Correctly program PXN and UXN privilege bits for hVHE's stage-1 page
tables
- Check that the VM is actually using VGICv3 before accessing the GICv3
CPU interface
- Delete some unused code
-----BEGIN PGP SIGNATURE-----
iI0EABYKADUWIQSNXHjWXuzMZutrKNKivnWIJHzdFgUCaWiyJBccb2xpdmVyLnVw
dG9uQGxpbnV4LmRldgAKCRCivnWIJHzdFqVhAQDM4Lbrq0F80X+YzvO7oxWioOy4
JiTATSii9Lit8KY6fgEAvLD4qaggLdF3+WY+V37YmTj3UDgI31ClBr+xSvSengA=
=XaL0
-----END PGP SIGNATURE-----
Merge tag 'kvmarm-fixes-6.19-1' of https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.19
- Ensure early return semantics are preserved for pKVM fault handlers
- Fix case where the kernel runs with the guest's PAN value when
CONFIG_ARM64_PAN is not set
- Make stage-1 walks to set the access flag respect the access
permission of the underlying stage-2, when enabled
- Propagate computed FGT values to the pKVM view of the vCPU at
vcpu_load()
- Correctly program PXN and UXN privilege bits for hVHE's stage-1 page
tables
- Check that the VM is actually using VGICv3 before accessing the GICv3
CPU interface
- Delete some unused code
- Reduce possible complications when cross-compiling by increasing use
of ${NM} in check-function-names.sh
- Fix static linking of nconf
Cc: Carlos Llamas <cmllamas@google.com>
Cc: Arkadiusz Kozdra <floss@arusekk.pl>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Nicolas Schier <nsc@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ExIb
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux
Pull kbuild fixes from Nicolas Schier:
- Reduce possible complications when cross-compiling by increasing use
of ${NM} in check-function-names.sh
- Fix static linking of nconf
* tag 'kbuild-fixes-6.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kbuild/linux:
kconfig: fix static linking of nconf
kbuild: prefer ${NM} in check-function-names.sh
